carta de formas de dientes general
TRANSCRIPT
Tooth mould chart
Resin Teeth· SR Antaris DCL· SR Vivodent DCL· SR Vivodent PE· SR Vivodent· SR Postaris DCL· SR Orthotyp DCL· SR Ortholingual DCL· SR Orthoplane DCL· SR Orthosit PE· SR Orthotyp PE· SR Orthotyp
Ceramic Teeth· Vivoperl PE· Vivoperl PE Orthotyp
Radiopaque Teeth· SR Vivo TAC/SR Ortho TAC
■Square tooth mouldsWith this angular shape, thecentral incisor is dominant.The gingivo-incisal curvatureis moderate and the residualridge is markedly square,indicating a normal bite.
▲Triangular tooth mouldsThis group is characterizedby teeth having a rejuvenating crown whichtapers towards the cervicalridge. The gingivo-incisalcurvature is moderate. Thelarge central incisor has anattractive, slightly triangularshape. The residual ridge isalso triangular, sometimesindicating a crossbite.
●Oval tooth mouldsThe teeth of this categoryhave a pronounced gingivo-incisal curvature. The ovalresidual ridge often indicatesan overbite.
Anterior Teeth
Selection Criteria
Ivoclar Vivadent anteriorteeth are categorized intosquare, tapering, and ovoidshapes. Although these areonly general descriptions,there are certain character-istics that can be ascribed toeach category.
However, it should be notedthat each mould has its ownindividual character andshould be viewed in the con-text of a complete set ratherthan focusing only on thisone set of criteria.
Layers Anterior Teeth
3 Layer Teeth– SR Antaris DCL– SR Vivodent– SR Vivodent DCL
4 Layer Teeth– SR Vivodent PE
PE stand for ”Pearl Effect”.PE teeth have a fourth layerthat adds a bluish iridescenteffect which increases lightreflection and creates a morenatural appearance.
Chromascop
A
P
A
P
P
P
A
P
A
P
P
A
P
Bleach DCLPMMA
SR Antaris DCL
SR Postaris DCL
SR Vivodent DCL
SR Orthotyp DCL
SR Orthoplane DCL
SR Ortholingual DCL
SR Vivodent PE (4-Schicht)
SR Orthotyp PE (4-Schicht)
SR Vivodent
SR Orthotyp
SR Orthosit PE
Vivoperl PE
Vivoperl / Orthotyp PE
A – DPE
Shade systems Mater
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Tooth Line A/P
X
X
X
X
N-type mould for normalbiteWith normal bite types(according to Angle, Class I),the intervestibular line ofthe anterior profile curve isperpendicular to the occlusalplane. For these patients, N-type moulds are to be used.They are available in five different sizes.
T-type mould for overbiteIn the rehabilitation of adeep overbite (distal bite,Class II), the recedingmandible contrasts with theprotruding maxilla. Theoverbite requires posteriorswith steep cusp inclination.For that reason, T-typemoulds should be selected.They are available in twosizes.
K-type mould for cross-biteIn a crossbite situation(Class III), a protrudingmandible results in the inter-vestibular line forming a rel-atively acute angle in rela-tion to the occlusal plane. K-type moulds are thus indi-cated, as their inclination is relatively flat. They are alsoavailable in two sizes.
Posterior Teeth
This tooth selection chartfacilitates the selection ofcorresponding sizes tomatch the selection anteriorteeth.
Ivoclar Vivadent offers avariety of posterior occlusaloptions, which give the clinician the opportunity toselect a tooth form that willbest meet the functionaland esthetic needs of thepatient.
SR Postaris DCLSR Postaris DCL is the exquisite posterior tooth forcomplete dentures, but particularly for partial dentures. The naturalocclusal scheme allows the patient excellent mastication, supports functional movements andoffers the user a large rangeof set-up concepts.
SR Ortholingual DCLThe new SR OrtholingualDCL posterior tooth combines aesthetics, functional occlusion, andexcellent abrasion behaviour.SR Ortholingual DCL offersan easy and functional set-up concept, particularly forthe lingualized set-up theory.
SR Orthoplane DCLSR Orthoplane DCL is the 0°posterior tooth, the mainfeature of which is the simple occlusal anatomy. It isparticularly suitable forgeroprosthodontics. Thespecial morphology offersthe patient maximum occlusal scope and reducestime when grinding theteeth during treatment.
Ceramicsosit
al
X
X
X
3
3
3
3
3
3
4
4
3
3
4
6
4
Layers
Anterior TeethSR Vivodent®PE / SR Antaris® DCL / SR Vivodent®DCL / SR Vivodent® / Vivoperl® PE
■ ▲Square Tooth Moulds Triangular Tooth Moulds
41.4 7.94
8.4
A11
45.1 8.488.
80
A12
43.6 8.46
9.80
A13
46.2 8.84
10.8
0
A14
49.1 8.96
10.8
0
A15
40.0 7.58
9.6
A21
42.8 7.84A22
42.3 8.40
10.6
A24
43.2 8.42
10.5
A24
B
47.1 8.72
10.7
A25
47.1 8.78
12.0
A26
48.5 8.92
11.0
A27
41.9 8.08
9.9
A41
43.9 7.86
10.0
A42
41.9 7.72
9.4
A44
50.7 9.40
12.6
0
A16
51.9 9.84
13.0
A17
47.1 8.64
8.60
A64
46.1 8.70
10.4
A66
49.4 9.28
9.70
A68
49.6 9.50
11.5
A69
9.6
Oval Tooth Moulds ●
Anterior TeethSR Antaris® DCL / SR Vivodent®DCL / SR Vivodent®PE / SR Vivodent® / Vivoperl® PE
42.8 7.84
9.4
A31
31.0 4.52
7.9
A1
33.2 4.84
9.2
A2
32.4 4.76
8.2
A3
32.2 4.82
9.4
A4
34.5 5.24
8.5
A5
34.6 5.04
9.5
A6
36.0 5.60
9.3
A7
38.1 5.76
9.5
A8
36.5 5.72
12.2
A9
37.5 5.70
9.1
A10
44.7 9.389.
5
A32
48.0 8.66
10.0
A34
46.4 8.64
10.3
A36
41.8 7.70
8.9
A52
46.4 8.66
9.6
A54
47.5 8.84
10.3
.
A56
48.1 9.02
11.7
A37
The following tooth moulds are not available:
– SR Antaris DCL: A21, A1
– SR Vivodent and SR Vivoperl PE: A16, A26, A37, A69
– SR Vivodent DCL: A1, A10, A21, A31, A34, A52, A64
Posterior TeethSR Orthotyp®PE / SR Orthosit®PE / SR Orthotyp®DCL / SR Orthotyp®
Vivoperl PE Orthotyp
N2
N4
N3
N5
N6
32.2
31.6
30.2
34.1
31.6
33.8
31.2
36.4
34.1
29.0
8.28
8.62
8.14
8.64
8.74
9.16
8.14
8.50
9.18
9.74
Posterior Teeth SR Orthosit®PE / SR Orthotyp®PE
T6K
2T4
K4
33.5
30.5
33.7
31.5
30.2
26.5
33.0
29.8
7.52
8.54
8.62
9.28
7.38
7.42
8.52
8.32
Posterior Teeth SR Postaris®DCL
PL-1
PU-1
PL-1
.5PU
-1.5
PL-2
PU-2
PL-3
PU-3
32.6
30.0
10.30
10.52
33.1
31.1
34.4
32.3
35.1
33.6
10.32
10.50
10.36
11.42
9.90
11.28
PL-3
.5PU
-3.5
PL-4
PU-4
36.1
34.1
9.88
11.26
36.6
34.3
10.40
10.86
Posterior Teeth SR Ortholingual®DCL
LL3
LU3
LL5
LU5
LL6
LU6
SR Orthoplane®DCL
ML5
MU
5M
L6M
U6
32.0
30.9
8.38
9.0
33.9
32.8
8.86
9.54
36.0
34.1
9.48
9.90
33.8
32.9
8.64
9.68
35.7
34.7
9.65
10.16
ML3
MU
3
31.6
31.0
9.96
9.12
Combination Table
* The tooth moulds A21 und A1 are not available for SR Antaris DCL.
**The tooth moulds A16, A26, A37, A69 are only available for the toothlines SR Antaris DCL, SR Vivodent DCL and SR Vivodent PE.
Anterior Teeth Posterior Teeth
upper lower P N- K- T- L- M-DCL Resin Porcelain Resin Resin Resin DCL Resin DCL Resin
Partial normal cross-bite overbite lingual contact Monoplane
A 11 A 3 PU-1 / PL-1 N 3 N 3 K 2 / K 4 T4 LU3 / LL3 MU3 / ML3
A 12 A 5 PU-1 / PL-1, PU-1.5 / PL-1.5 N 2 N 3 K 2 / K 4 T4 LU3 / LL3 MU3 / ML3
A 13 A 5 PU-2 / PL-2 N 2 N 3 / N 5 K 4 T4 LU3 / LL3 MU3 / ML3
A 14 A 6 / A 7 PU-3 / PL-3, PU-3.5 / PL-3.5 N 4 N 5 K 4 T4 LU5 / LL5 MU5 / ML5
A 15 A 8 PU-3.5 / PL-3.5, PU-4 / PL-4 N 4 N 4 K 4 T4 / T6 LU5 / LL5 MU5 / ML5
**A 16 A 9 / A 10 PU-4 / PL-4 N 6 N 6 K 4 T4 / T6 LU5 / LL5 MU5 / ML5LU6 / LL6 MU6 / ML6
A 17 A 9 PU-4 / PL-4 N 6 N 6 K 4 T4 LU5 / LL5 MU5 / ML5LU6 / LL6 MU6 / ML6
A 64 A 5 / A 7 PU-2 / PL-2, PU-3 / PL-3 N 4 N 5 K 4 T4 LU5 / LL5 MU5 / ML5
A 66 A 5 / A 7 PU-3 / PL-3 / PU-3.5 / PL-3.5 N 4 N 5 K 4 T4 LU5 / LL5 MU5 / ML5
A 68 A 7 PU-3.5 / PL-3.5 / PU-4 / PL-4 N 4 N 4 / N 5 K 4 T4 LU5 / LL5 MU5 / ML5
**A 69 A 7 / A 8 PU-4 / PL-4 N 6 N 4 / N 6 K 4 T4 / T6 LU5 / LL5 MU5 / ML5LU6 / LL6 MU6 / ML6
*A 21 A 3 N 2 N 3 K 2 / K 4 T4 LU3 / LL3 MU3 / ML3
A 22 A 3 PU-1 / PL-1, PU-1.5 / PL-1.5 N 2 N 3 / N 5 K 2 / K 4 T4 LU3 / LL3 MU3 / ML3
A 24 A 2 PU-2 / PL-2 N 2 N 2 K 4 T4 LU3 / LL3 MU3 / ML3
A 24 B A 4 / A 5 PU-2 / PL-2 N 2 N 2 K 4 T4 LU3 / LL3 MU3 / ML3
A 25 A 10 PU-3 / PL-3, PU-3.5 / PL-3.5 N 4 N 4 K 4 T4 LU5 / LL5 MU5 / ML5
**A 26 A 7 PU-3.5 / PL-3.5, PU-4 / PL-4 N 4 N 4 K 4 T4 / T6 LU5 / LL5 MU5 / ML5
A 27 A 8 PU-4 / PL-4 N 4 N 4 K 4 T4 LU5 / LL5 MU5 / ML5
A 41 A 3 / A 5 PU-1 / PL-1, PU-1.5 / PL-1.5 N 2 N 3 / N 5 K 2 / K 4 T4 LU3 / LL3 MU3 / ML3
A 42 A 5 PU-1 / PL-1, PU-1.5 / PL-1.5 N 2 N 3 / N 5 K 4 T4 LU5 / LL5 MU5 / ML5
A 44 A 3 PU-1 / PL-1, PU-1.5 / PL-1.5 N 2 N 3 / N 5 K 2 / K 4 T4 LU3 / LL3 MU3 / ML3
A 31 A 3 PU-1 / PL-1 N 2 N 3 K 2 / K 4 T4 LU3 / LL3 MU3 / ML3
A 32 A 3 / A 5 PU-1.5 / PL-1.5, PU-2 / PL-2 N 2 N 3 / N 5 K 2 / K 4 T4 LU5 / LL5 MU5 / ML5
A 34 A 5 PU-2 / PL-2, PU-3 / PL-3 N 4 N 5 K 4 T4 LU5 / LL5 MU5 / ML5
A 36 A 7 PU-3 / PL-3, PU-3.5 / PL-3.5 N 4 N 5 K 4 T4 LU5 / LL5 MU5 / ML5
**A 37 A 7 / A 8 PU-3.5 / PL-3.5, PU-4 / PL-4 N 4 N 5 K 4 T4 / T6 LU5 / LL5 MU5 / ML5
A 52 *A 1 / A 3 PU-1 / PL-1, PU-1.5 / PL-1.5 N 1 N 3 K 2 / K 4 T4 LU3 / LL3 MU3 / ML3
A 54 A 5 PU-2 / PL-2, PU-3 / PL-3 N 5 N 5 K 4 T4 LU5 / LL5 MU5 / ML5
A 56 A 7 / A 8 PU-3 / PL-3, PU-3.5 / PL-3.5 N 4 N 5 K 4 T4 LU5 / LL5 MU5 / ML5
■
▲
●
Diese Kombinationstabelle wird als Richtlinie empfohlen. Bei besonderen anatomischen Verhältnissen sind Abweichungen möglich.
Radiopaque TeethSR Vivo TAC®/ SR Ortho TAC®
Anterior Teeth Posterior Teeth
The new radiopaque teeth SR Vivo TAC / SR Ortho TAC offer an efficient solution for determining the future placement, location andangulation of implants. The innovative SR Vivo TAC / SR Ortho TAC teeth allow the diagnosticsteps needed for planning the placement of implants to be conductedcarefully.
Radiopaque teeth for the fabrication of diagnostic stents
10.8
10.5
10.7
11.0
9.4
9.5
12.2
8.96
8.42
8.72
8.92
4.82
5.76
5.72
47.1
48.5
32.2
38.1
36.5
N2
8.28
8.62
32.2
30.2
N6
9.18
9.74
36.4
34.1
49.1
43.2
A15
A
24B
A25
A27
A4
A8
A9
Characterization of resin teethIncreasing aesthetic demands placed on removable dentures call for the possibility ofindividual characterization of resin teeth. Incombined denture prosthetics, this has becomean indispensable part of the daily practice. Thematerial composition of SR Antaris / SR Postarispermit individual adjustments of shape andshade by means of SR Chromasit Creative and /or SR Spectrasit Creative veneering materials.
Part of the BiofunctionalProsthetic System
Ivoclar Vivadent ICDEAlways being on the lateststandard of knowledge is asign of your competence.Ivoclar Vivadent supports youin achieving this goal by conveying to you both knowledge about the latestproducts and know-howwith regard to practice-oriented application andworking techniques. The
Ivoclar Vivadent ICDE continuously offers basic and advancedtraining courses tailored to your needs.
Ask for our Course Programme!
Ivoclar Vivadent AGBendererstr. 2FL-9494 SchaanPrincipality of LiechtensteinTel. +423 / 235 35 35Fax +423 / 235 33 60www.ivoclarvivadent.com
These products have been developed solely for use inthe fabrication of dental tooth restorations or toothplacements. Processing should be done strictly according to the Instructions for Use. Descriptions anddata constitute no warranty of attributes and are notbinding. Printed in Liechtenstein© Ivoclar Vivadent AG, Schaan/Liechtenstein 561355/1103/3/e/BVD
with the SR Vivodent PE /Vivoperl PE specialshade guides– SR Vivodent PE– SR Orthotyp PE– Vivoperl PE– Vivoperl PE Orthotyp
The special shadeguides are coordinated with SR Vivodent PE/SR Orthotype PE / SR Vivoperl PE / SR Vivoperl PE Orthotyp tooth lines. The special ‘Pearl’ effectrenders these tooth lines especially suitable for completedenture prosthetics.
Shade selection with the Chromascop shade guide – SR Antaris DCL – SR Postaris DCL
(also available inA–D shades)
– SR Vivodent – SR Orthotyp – SR Ortholingual DCL
(A–D shades also available)– SR Orthoplane DCL (A–D shades also
available)
The Chromascop is the shade standard for theIvoclar Vivadent lines of products. The uniform shading of C&B veneering materials (e.g. IPS d.SIGN, SR Chromasit), the SR Antaris anterior and the SR Postaris posterior tooth linesets new standards especially for combined denture prosthetics.
ZahnformenkarteMould chart
KunststoffzähneResin teethIvostar®/Gnathostar®
Frontzähne
Ivostar®
unterelowers
01
40,4
9,4
7,7
02
43,0
9,6
8,2
03
44,7
10,4
04
46,8
10,0
8,8
05
47,7
10,0
8,9
8,2
31
42,1
32
45,0
33
45,9
34
45,4
35
47,8
9,5
7,9
10,5
8,6
10,0
8,8
11,0
8,7
11,3
8,9
41
42,2
42
45,0
43
48,4
44
47,3
45
48,7
9,6
7,7
10,4
8,5
10,5
8,6
11,5
8,7
12,4
9,3
11
36,0
12
34,2
13
32,9
8,8
4,8
14
33,1
9,5
5,0
15
35,2
10,2
5,3
16
37,6
10,6
5,6
9,1
4,9
8,2
5,1
obereuppers
Seitenzähne
Gnathostar®
28,9
D80
D82
33,9
30,7
D84
30,7
D86
33,5
D88
28,7
32,9
35,6
31,0
31,2
FormenEs steht eine Formenpalettevon Ivostar-Frontzähnen in15 Oberkiefer- und 6 Unter-kieferformen zur Verfügung.Die Frontzähne unterschei-den sich als dreieckige, qua-dratische und ovale Formen– sortiert von klein bis gross.Die Gnathostar-Seitenzähnebeinhalten 5 obere und 5 untere Zahngrössen.
FarbenDer Chromascop, Farb-schlüssel basiert auf 20 Zahnfarben, welche aufbewährte Ivoclar VivadentDentinfarben aufgebautsind. Somit ist derChromascop der Farb-schlüssel für sämtliche pro-thetische Restaurationen inIPS d. SIGN, IPS Empresssowie für die gesamte Par-tial- und Totalprothetik.Zusätzlich sind die Formenauch in A–D- und BleachFarben erhältlich.
SchichtungIvostar/Gnathostar sindMehrschichtzähne undadaptieren durch ihre harmonische Schichtung dieNatürlichkeit des Originals.
MouldsA wide range of 15 upperand 6 lower Ivostar anteriormolds; 5 upper and 5 lowerGnathostar posterior molds.The anteriors come in threeschapes: triangular, rectan-gular, and oval – arrangedfrom small to large.
Shades The Chromascop shadeguide comprises 20 shadesbased on the tried and tested Ivoclar Vivadent dentin shades. TheChromascop is therefore the shade guide for all prosthetic restorations forIvoclar Vivadent metal-freeceramics, for IPS Empress, aswell as for partial and complete dentures.Also moulds are available inA–D- and Bleach shades.
LayeringHarmonized layering givesIvostar/Gnathostar teeth thenatural appearance of theoriginal tooth.
obere untere Zähneuppers lowers Posteriors
31 13/14 D80/D82/D8632 15/11 D88 / D8433 11/15 D8434 15/14 D84 / D8835 16/15 D88 / D8441 14 D80 / D8642 15 D84 / D8843 16 D8844 14/15 D8845 16 D8801 12/13 D80 / D8202 12/13 D80 / D8203 15/11 D8404 11/15 D8405 11/15 D84 / D88
FormMold
▲
■
●
Kombinationstabelle / Combination table
Ivostar® / Gnathostar®
AuswahlkriterienZur Auswahl gibt es mehrereMethoden, zu der Kopfform,Körperbau sowie feminineoder maskuline Erscheinungherangezogen werden. Zu-sätzlich kann man jedoch,wenn Informationen überGrösse, Form und Stellung derZähne gänzlich fehlen, ausder Oberkieferform Anhalts-punkte gewinnen. Aus dergrossen Zahl von Oberkiefer-formen kann man grundsätz-lich drei Formentypen ab-leiten.
• quadratische• dreieckige• ovale
Ordnet man die IvoclarVivadent Frontzähne in ihreranatomischen Erscheinungdiesen drei Grundformen zu,ergibt sich folgende Eintei-lung. Die Auswahl der unte-ren Ivoclar Vivadent Front-zähne erfolgt mit Hilfe derKombinationstabelle.
Criteria for SelectionThere are numerous methodsemployed in the selection ofteeth, based on such criteria asthe shape of the head, bodilystructure, and male or femalecharacteristics. Even if no infor-mation is available on the size,shape, and position of theteeth, valuable points of reference can be obtainedfrom the form of the maxilla.From the vast range of maxillary forms identifiable,three basic types can be inferred:
• square• triangular• oval
If these three forms are usedto group Ivoclar Vivadentteeth according to their anatomic characteristics, thefollowing classification results.
The selection of the lowerIvoclar Vivadent anteriors isdone with help of the com-bination chart (mould cart).
Dreieckige ZahnformenTriangular Tooth Molds
Quadratische ZahnformenSquare Tooth Molds
Ovale ZahnformenOval Tooth Molds
Die Zahnfarben sind in 5 Farbgruppen unterteilt undnumerisch nach Farbintensitätchromatisch angeordnet.
Der Chromascop Farbschlüsselindiziert sich als einheitlicherFarbstandard für die gesamteIvoclar Vivadent Produkte-palette.
Tooth shades are chromaticallydivided into 5 groups andnumerically organized according to shade intensity.
The Chromascop shade guideis the uniform shade standardfor the entire Ivoclar Vivadentproduct range.
31, 32, 33, 34, 35.Diese Zahngruppe ist geprägt durch Zähne mitschlankem, sich nach zervikal verjüngendemKronenverlauf.Die vertikale Labialkrümmung ist mittelmässigstark ausgeprägt. Der grosse Schneidezahn hateine gefällige, leicht dreieckige Form.Der Kieferkammverlauf ist ebenfalls dreieckig undweist im Wesentlichen auf Kreuzbissverhältnissehin.
31, 32, 33, 34, 35.These groups are characterized by teeth having arejuvenating crown which tapers towards the cervical ridge.Gingivo-incisal curvature is somewhat more pronounced. The large central incisor has anattractive, slightly triangular form.The residual ridge is also triangular and basicallyindicated for cross-bite.
41, 42, 43, 44, 45.Die Formen sind eher eckig und der zentraleSchneidezahn hat eine relativ dominanteErscheinung.Die vertikale labiale Krümmung zeigt einengemässigten Verlauf. Der Kieferkammverlauf istbetont eckig und zeigt Tendenzen für einenNormalbissfall.
41, 42, 43, 44, 45.These molds are basically quadrilateral and thecentral incisor relatively dominant.Gingivo-incisal curvature is moderate. The residualridge is markedly square and tends to be indicated for cases involving normal bite.
01, 02, 03, 04, 05.Das anatomische Erscheinungsbild dieser Gruppezeigt starke Krümmungsmerkmale. Dies zeigt sichvor allem in einer ausgeprägten Labialkrümmung.Der ovale Kieferkammverlauf ist oft bei Tiefbiss-fällen zu finden.
01, 02, 03, 04, 05.These groups are anatomically characterized bypronounced gingivo-incisal curvature.An oval residual ridge is often found in cases ofdeep overbite.
Farben: Die Farbbestimmung der Ivostar/Gnathostar-Zähne erfolgt mit demChromascop-Farbring.
Shades: Ivostar/Gnathostar teeth are selected andcoordinated with the Chromascop shade guide.
Darstellungen und Angaben enthalten keineZusicherung von Eigenschaften und sind nichtbindend.Descriptions and data constitute no warrantyof attributes and are not binding. Printed in Liechtenstein © Ivoclar Vivadent AG, Schaan/Liechtenstein561353/0504/d/e/3/BVD
Vertrieb Deutschland Ivoclar Vivadent GmbHDr. Adolf-Schneider-Str. 2D-73479 Ellwangen, JagstTel. +49 (0) 79 61 / 8 89-0Fax +49 (0) 79 61 / 63 [email protected]
Hersteller und VertriebIvoclar Vivadent AGBendererstr. 2FL-9494 SchaanFürstentum LiechtensteinTel. +423 / 235 35 35Fax +423 / 235 33 60www.ivoclarvivadent.com