catalogue 2017 - straumann.com · catalogo_neodent en - capa - af.pdf página 2 (imagem com texto)...
TRANSCRIPT
002 003
Arquivo
catalogo_neodent EN - miolo - AF.pdf
Página 1 (Homem com Barba)
Arquivo
catalogo_neodent EN - capa - AF.pdf
Página 2 (Imagem com texto)
N E W S M I L E S E V E R Y D AY
Neodent provides you with a complete
range of products and services that
are designed and produced by a team
of professionals who truly love what
they do. Just like you, we live to give
people new reasons to smile. New
ways to enjoy everything life has to
offer. Every day.
004 005
Arquivo
catalogo_neodent EN - miolo - AF.pdf
Página 2 (roxa)
Technical Guidelines
CM Implant Line
Facility Implant Line
WS Implant Line
Zygomatic
Orthodontic Anchorage
Bone Grafting
Neodent Techniques
Titanium Bases and Blocks
Neodent Kits
Neodent Instruments
007
018
054
066
076
084
088
097
115
120
136
Note: Not all products are available in all countries. Please, contact the authorized distributor
008 009NeoPoros Surface NeoPoros Surface
A surface with a history of more than 10 years.Through years of intense research and development of new technologies, NEODENT has reached the currentstate-of-the-art process in treating the surface of its implants, the NeoPoros surface.
The NeoPoros surface is created using an abrasive particle jet concept with controlled grain oxides, followedby acid etching creating uniform cavities in the implant surface.
Scanning electron microscope
(SEM) images of the
NeoPoros surface showing
different regions
of the CM Drive implant.
Scanning electron microscope (SEM) images of the NeoPoros surface at 2000X and 3000X amplification show controlled roughness across the surface of the implant.
Image taken by confocal microscopy. Roughness and Microtopography.(Sa= 1,4 – 1,8 μm; Sz= 15 μm).
010 011Acqua Surface Acqua Surface
:: Hydrophilic Surface.
Surfaceconcept evolution
1. Rupp F, Scheideler L, Eichler M, Geis-Gerstorfer J. Wetting behavior of dental implants. Int J Oral Maxillofac Implants. 2011 Nov-Dec; 26(6):1256-66.
2. Bico J, Thiele U, Quéré D. Wetting of textured surfaces. Collids and Surfaces. A: Physicochemical and Engineering Aspects 206 (2002) 41–46.
Surface Comparison
Hydrophobic Surface(conventional).
Acqua HydrophobicSurface
Acqua: the innovative surface featuring increased wettability.
Wettability is an important component to the accessibility of an implant with the body.(1,2)
The wettability characteristic is assessed by the contact angle of a drop of liquid on the surface of the implant.
If you compare hydrophobic and hydrophilic surfaces, a differentiated cascade of initial interfacial stresses is expected.
Lab generated image.
012 013
Implant Packaging
Neodent implant packaging has been updated to a concept that provides convenience andsafety through all steps of the procedure, from storage to the placement of the implant.The new packaging aids in identification of both the implant model as well as its diameter and length, regardless of its storage position.
Neodent innovates once more, providing an on-line platform designed to provide quick and practical use of its products instructions: the portal e-IFU (Instructions for Use).
To facilitate access, the external packaging of the product presents a specific code for its use instruction, plus information on how to proceed to view this online version. Once the code is entered in the portal, the professional will have access to relevant information to this product, such as description, indication for use, contraindications, handling, traceability and other features.
Acess: ifu.neodent.com.br
Package e-IFU
After breaking the sterility seal on the blister,
hold the primary package (crystal blue) and
twist the cap to open the lid.
To secure the implant, grip both sides
of the stand.
To capture the implant with the contra-angle
handpiece attachment, grip the stand while
placing the attachment into the
implant chamber.
To remove the implant from the tube lift
the cap up, which has the stand and implant
attached to it.
While gripping the stand, remove the lid. The implant can now be transported to the
surgical site.
To access the IFU portal, type the above address in your browser
Enter in the fieldsearch the IFU code which is described in the packaging of product in the format 330.xxx.xx
The search result is presented below in the search field,informing the IFU code, the name of the product and its validity
ifu.neodent.com.br
The IFU will automatically open in a new window. In case you want to download it,click the save as icon to download in your browser
Click the IFU iconor description to open the file
Package instruction of use
e-IFU – Electronic Instructions for Use
1
4
2
3
5
014 015Technical Guidelines Technical Guidelines
Implant indication table ScrewdriversAccording to Lekholm and Zarb bone classification (1985).
* Bone tap is needed
0.9 1.2 1.6 ProstheticAbutment Driver
15N.cm
32N.cm
10N.cm32N.cm
32N.cm
32N.cm32N.cm
32N.cm10N.cm
32N.cm
15N.cm15N.cm15N.cm
CM Abutment17° / 30° CM Mini Conical AbutmentCM Mini and CM Micro Conical AbutmentCM Universal AbutmentCM Exact Universal Abutment (2 Piece)17° / 30º CM Exact Universal AbutmentCM Exact Anatomic AbutmentCM Equator AttachmentCopingsWS AbutmentWS Mini Conical AbutmentWS Universal AbutmentCopings
CONE MORSECM
CONE MORSE WSWS
Bone type I
*
*
*
*
*
*
*
*
Bone type II Bone type III Bone type IV
DriveCM Acqua
DriveCM
TitamaxCM EX Acqua
TitamaxCM EX
TitamaxCM
AlvimCM Acqua
AlvimCM
Facility Acqua
Facility
TitamaxWS
016 017Implant features Implant features
APEX
PROS
THET
ICCO
NNEC
TION
IMPL
ANT
BODY
Drive Titamax
CM
Alvim
AlvimTitamaxDrive Titamax EX
CM Implant Line
018 019
Cone Morse Cone Morse
ABUTMENT INDICATION TABLE
•CM Abutment (single-unit)•CM Mini Conical Abutment (multiple-unit)•17° / 30° CM Mini Conical Abutment (multiple-unit)
•CM Micro Conical Abutment (multiple-unit)
•17°/30° CM Universal Abutment
•CM Universal Abutment•CM Exact Universal Abutment
• CM Anatomic Exact Abutment
•Attachment Equator •CM Micro Conical Abutment•CM Mini Conical Abutment•17° / 30° CM Mini ConicalAbutment•Coping and Distal Bar
One Step Hybrid Technique•Castable Mini Conical One StepHybrid Coping•Titanium Mini Conical One StepHybrid Coping•Brass Mini Conical One Step Hybrid Coping
3.5 mm3.75 mm
4.0 mm4.3 mm5.0 mm
Screw-retainedProstheses
Cement-retainedProstheses Overdenture Hybrid
Ø 2.5 mm
Ø Implant
CONEMORSE
(Morse Taper)
Inne
r Thr
ead
Ø 1.
8
Cone MorseStreamlined implanttransportation thatdoes not require animplant mount.
CM Implant Driver.
CM Exact Abutmentsfeature a hex index.
CM Implantsfeature aprosthetic index.
020 021
Implants featuring the prosthetic index streamline the implant placement process and enable the planning of the final restoration of the implant increasing versatility in clinical and lab procedures.
CM Implants withProsthetic Index
Implant Capture and TransportA specific driver, available for the contra-angle handpiece, allows for the capture of the implant directly from its packaging.
Each implant placement must be initiated with the contra-angle driver (whether using the contra-angle or the digital screwdriver for contra-angle connections).
When the implant is secured, the contra-angle driver should be replaced by the torque wrench driver to place the implant in the osteotomy. Using the torque wrench driver will preserve both the contra-angle driver and the contra-angle bearings themselves, extending their life expectancy and preventing the contra-angle driver from locking inside of the implant.
DriversThe placement drivers have six dimples that coincide with the six flat sides of the implant’s prosthetic index. Upon placement, one of the marks should be in the bucal position in order to allow for the proper alignment and placement of the abutment and final restoration.
Cone Morse Cone Morse
CM Exact LineCM Implants, which include a single interface for all implant diameters (except for WS, Zygomatic and Facility), also feature the Exact line of prosthetics. These abutments include a hex index that allows for positioning the prostheses in the implant (prosthetic indexing), adding even more versatility to the CM line.
022 023
Alvim2.0
Initial Alvim3.5
CM Pilot 2.8 / 3.5
CM Pilot 3.6 / 4.3
CM Pilot 4.3 / 5.0
Alvim4.3
Alvim5.0
Cone Morse | DriveCM Acqua Cone Morse | DriveCM Acqua
:: Implant with conical central core witha Cone Morse (Morse Taper) connection;:: Double and progressive thread design;
:: Counterclockwise cutting chambers;:: Recommended for tbone types III and IV and
extraction sockets;:: Single prosthetic connection for all implant diameters;
:: For increased esthetic results, it is recommended that the implant be placed 2mm sub-crestal;
:: Drilling speed: 500 - 800 rpm;:: Placement speed: 30 rpm;
:: Maximum insertion torque: 60N.cm.
PRODUCTFEATURES:
*Optional
Ø 3.3
Ø 3.5
Ø 4.5
Ø 4.3
Ø 5.0
5.5 mm 6.5 mm4.5 mm3.5 mm2.5 mm1.5 mm0.8 mm
106.182 106.168 106.169 106.170 106.183 106.184 106.185
106.175 106.171 106.172 106.173 106.174 106.180 106.181
CM Cover screw
:: Use manual screwdriver 1.2mm
(104.012) for placement;
:: Do not exceed 10N.cm torque.
:: Use manual screwdriver 1.2mm
(104.012) for placement;
:: Do not exceed 10N.cm torque.
Healing Abutments
Gingival Height
117.013 117.017
0 mm 2 mm
103.170 103.172 103.173103.171 103.216 103.219
DRILL SEQUENCE
103.174 103.220
8.0 mm 10.0 mm 13.0 mm11.5 mm 16.0 mm 18.0 mm
140.692 140.682 140.683140.693 140.684 140.896
140.689 140.688 140.628140.627 140.629 140.897
140.690 140.685 140.686140.691 140.687 140.898
Ø 3.5 mm
Ø 4.3 mm
Ø 5.0 mm
024 025
Alvim2.0
Initial Alvim3.5
CM Pilot 2.8 / 3.5
CM Pilot 3.6 / 4.3
CM Pilot 4.3 / 5.0
Alvim4.3
Alvim5.0
Cone Morse | DriveCM Cone Morse | DriveCM
:: Implant with conical central core witha Cone Morse (Morse Taper) connection;:: Double and progressive thread design;
:: Counterclockwise cutting chambers;:: Recommended for bone types III and IV and
extraction sockets;:: Single prosthetic connection for all implant diameters;
:: For increased esthetic results, it is recommended that the implant be placed 2mm sub-crestal;
:: Drilling speed: 500 - 800 rpm;:: Placement speed: 30 rpm;
:: Maximum insertion torque: 60N.cm.
PRODUCTFEATURES:
8.0 mm 10.0 mm 13.0 mm11.5 mm 16.0 mm
109.1004 109.994 109.995109.1005 109.996
109.1001 109.1000 109.992109.991 109.993
109.1002 109.997 109.998109.1003 109.999
*Optional
DRILL SEQUENCE
CM Cover screw
:: Use manual screwdriver 1.2mm
(104.012) for placement;
:: Do not exceed 10N.cm torque.
:: Use manual screwdriver 1.2mm
(104.012) for placement;
:: Do not exceed 10N.cm torque.
Healing Abutments
117.013 117.017
103.170 103.172 103.173103.171 103.216 103.219 103.174 103.220
Ø 3.5
Ø 4.3
Ø 5.0
0 mm 2 mm
Ø 3.5 mm
Ø 4.3 mm
Ø 5.0 mm
18.0 mm
109.1006
109.1007
109.1008
Ø 3.3
Ø 4.5
5.5 mm 6.5 mm4.5 mm3.5 mm2.5 mm1.5 mm0.8 mm
106.182 106.168 106.169 106.170 106.183 106.184 106.185
106.175 106.171 106.172 106.173 106.174 106.180 106.181
Gingival Height
026 027
Titamax2.0
Initial Pilot2/3
Titamax2.8
Titamax3.0
:: Cylindrical implant body design with tapered apexwith a Cone Morse (Morse Taper) connection;
:: Double lead thread design;:: Recommended for bone types III and IV and
for narrow bone width;:: Single prosthetic connection for all implant diameters;
:: For increased esthetic results, it is recommended that the implant be placed 2mm sub-crestal;
:: Drilling speed: 500 - 800 rpm;:: Placement speed: 30 rpm;
:: Maximum insertion torque: 60N.cm.
PRODUCTFEATURES:
9.0 mm 11.0 mm 15.0 mm13.0 mm 17.0 mm
140.661 140.662 140.664140.663 140.665
140.666 140.667 140.669140.668 140.670
140.636 140.637 140.639140.638 140.640
CM Cover screw
:: Use manual screwdriver 1.2mm
(104.012) for placement;
:: Do not exceed 10N.cm torque.
:: Use manual screwdriver 1.2mm
(104.012) for placement;
:: Do not exceed 10N.cm torque.
Healing Abutments
117.013 117.017
*Optional
DRILL SEQUENCE
103.170 103.213 103.164103.162 103.163
Cone Morse | TitamaxCM EX Acqua Cone Morse | TitamaxCM EX Acqua
Ø 3.5
Ø 3.75
Ø 4.0
0 mm 2 mm
Ø 3.5 mm
Ø 3.75 mm
Ø 4.0 mm
Ø 3.3
Ø 4.5
5.5 mm 6.5 mm4.5 mm3.5 mm2.5 mm1.5 mm0.8 mm
106.182 106.168 106.169 106.170 106.183 106.184 106.185
106.175 106.171 106.172 106.173 106.174 106.180 106.181
Gingival Height
028 029
Titamax2.0
Initial Pilot2/3
Titamax2.8
Titamax3.0
:: Cylindrical implant body design with tapered apexwith a Cone Morse (Morse Taper) connection;
:: Double lead thread design;:: Recommended for bone types III and IV and
for narrow bone width;;:: Single prosthetic connection for all implant diameters;
:: For increased esthetic results, it is recommended that the implant be placed 2mm sub-crestal;
:: Drilling speed: 500 - 800 rpm;:: Placement speed: 30 rpm;
:: Maximum insertion torque: 60N.cm.
PRODUCTFEATURES:
9.0 mm 11.0 mm 15.0 mm13.0 mm 17.0 mm 19.0 mm
109.661 109.662 109.664109.663 109.665
109.666 109.667 109.669109.668 109.670 109.671
109.636 109.637 109.639109.638 109.640 109.641
CM Cover screw
:: Use manual screwdriver 1.2mm
(104.012) for placement;
:: Do not exceed 10N.cm torque.
:: Use manual screwdriver 1.2mm
(104.012) for placement;
:: Do not exceed 10N.cm torque.
Healing Abutments
117.013 117.017
*Optional
DRILL SEQUENCE
Cone Morse | TitamaxCM EX Cone Morse | TitamaxCM EX
Ø 3.5
Ø 3.75
Ø 4.0
103.170 103.213 103.164103.162 103.163
0 mm 2 mm
Ø 3.5 mm
Ø 3.75 mm
Ø 4.0 mm
Ø 3.3
Ø 4.5
5.5 mm 6.5 mm4.5 mm3.5 mm2.5 mm1.5 mm0.8 mm
106.182 106.168 106.169 106.170 106.183 106.184 106.185
106.175 106.171 106.172 106.173 106.174 106.180 106.181
Gingival Height
030 031
Titamax2.0
Initial Pilot2/3
Titamax2.8
Titamax3.3
CM Pilot3.3 / 4.0
Titamax4.3
Titamax3.0
CM Pilot 2.8 / 3.5
CM Pilot3 / 3.75
Titamax3.8
CM Pilot4.3 / 5.0
:: Cylindrical implant body designwith a Cone Morse (Morse Taper) connection;
:: Double lead thread design;:: Recommended for bone types I and II;
:: Single prosthetic connection for all implant diameters;:: For increased esthetic results, it is recommended
that the implant be placed 2mm sub-crestal;:: Drilling speed: 800 - 1200 rpm;
:: Placement speed: 30 rpm;:: Maximum insertion torque: 60N.cm.
PRODUCTFEATURES:
7.0 mm 8.0 mm 11.0 mm 17.0 mm9.0 mm 15.0 mm13.0 mm
109.613 109.614 109.616 109.619109.615 109.618109.617
109.606 109.607 109.609 109.612109.608 109.611109.610
109.630
109.642
109.631
109.643
109.633
109.645 109.646
109.635109.632
109.644
109.634109.620
CM Cover screw
:: Use manual screwdriver 1.2mm
(104.012) for placement;
:: Do not exceed 10N.cm torque.
:: Use manual screwdriver 1.2mm
(104.012) for placement;
:: Do not exceed 10N.cm torque.
Healing Abutments
117.013 117.017
DRILL SEQUENCE
103.170 103.213 103.166 103.167103.164 103.218 103.220103.162 103.216103.163 103.217 103.168
APEXSeamless adaptation
between drill and implant
Cone Morse | TitamaxCM Cone Morse | TitamaxCM
Ø 3.5
Ø 3.75
Ø 4.0
Ø 5.0
0 mm 2 mm
Ø 3.5 mm
Ø 3.75 mm
Ø 4.0 mm
Ø 5.0 mm
Ø 3.3
Ø 4.5
5.5 mm 6.5 mm4.5 mm3.5 mm2.5 mm1.5 mm0.8 mm
106.182 106.168 106.169 106.170 106.183 106.184 106.185
106.175 106.171 106.172 106.173 106.174 106.180 106.181
Gingival Height
032 033
:: Tapered implant body design with a Cone Morse (Morse taper) connection;:: Dual lead thread design;
:: Recommended for type I and II bonesin association with the Bone Tap;
:: Recommended for bone types III and IV and post-extraction;
:: Single prosthetic connection for all implant diameters;:: For increased esthetic results, it is recommended that the implant be
placed 2mm sub-crestal;:: Drilling speed: 800 - 1200 rpm for type I and II bones;:: Drilling speed: 500 - 800 rpm for type III and IV bones;
:: Placement speed: 30 rpm;:: Maximum insertion torque: 60 N.cm.
PRODUCTFEATURES:
DRILL SEQUENCE
CM Cover screw
:: Use manual screwdriver 1.2mm
(104.012) for placement;
:: Do not exceed 10N.cm torque.
:: Use manual screwdriver 1.2mm
(104.012) for placement;
:: Do not exceed 10N.cm torque.
Healing Abutments
117.013 117.017
Cone Morse | AlvimCM Acqua Cone Morse | AlvimCM Acqua
Alvim2.0
Initial Alvim3.5
CM Pilot 2.8 / 3.5
CM Pilot3.6 / 4.3
CM Pilot4.3 / 5.0
Alvim BoneTap 5.0
Alvim4.3
Alvim BoneTap 3.5
Alvim BoneTap 4.3
Alvim5.0
* Optional** Recommended for bone type I and II
103.170 103.172 111.036103.171 103.216 103.173 103.174103.219 103.220111.037 111.038
0 mm 2 mm
Ø 3.5 mm
Ø 4.3 mm
Ø 5.0 mm
8.0 mm 10.0 mm 13.0 mm11.5 mm 16.0 mm
140.657 140.658 140.621140.659 140.660
140.647 140.648 140.622140.649 140.651
140.652 140.653 140.655140.654 140.656
Ø 3.5
Ø 4.3
Ø 5.0
Ø 3.3
Ø 4.5
5.5 mm 6.5 mm4.5 mm3.5 mm2.5 mm1.5 mm0.8 mm
106.182 106.168 106.169 106.170 106.183 106.184 106.185
106.175 106.171 106.172 106.173 106.174 106.180 106.181
Gingival Height
034 035
:: Tapered implant body design with a Cone Morse (Morse taper) connection;:: Dual lead thread design;
:: Recommended for type I and II bonesin association with the Bone Tap;
:: Recommended for bone types III and IV and post-extraction;
:: Single prosthetic connection for all implant diameters;:: For increased esthetic results, it is recommended that the implant be
placed 2mm sub-crestal;:: Drilling speed: 800 - 1200 rpm for type I and II bones;:: Drilling speed: 500 - 800 rpm for type III and IV bones;
:: Placement speed: 30 rpm;:: Maximum insertion torque: 60 N.cm.
PRODUCTFEATURES:
8.0 mm 10.0 mm 13.0 mm11.5 mm 16.0 mm
109.657 109.658 109.621109.659 109.660
109.647 109.648 109.622109.649 109.651
109.652 109.653 109.655109.654 109.656
CM Cover screw
:: Use manual screwdriver 1.2mm
(104.012) for placement;
:: Do not exceed 10N.cm torque.
:: Use manual screwdriver 1.2mm
(104.012) for placement;
:: Do not exceed 10N.cm torque.
Healing Abutments
117.013 117.017
Cone Morse | AlvimCM Cone Morse | AlvimCM
Ø 3.5
Ø 4.3
Ø 5.0
0 mm 2 mm
DRILL SEQUENCEAlvim2.0
Initial Alvim3.5
CM Pilot 2.8 / 3.5
CM Pilot3.6 / 4.3
CM Pilot4.3 / 5.0
Alvim BoneTap 5.0
Alvim4.3
Alvim BoneTap 3.5
Alvim BoneTap 4.3
Alvim5.0
* Optional** Recommended for bone type I and II
103.170 103.172 111.036103.171 103.216 103.173 103.174103.219 103.220111.037 111.038
Ø 3.5 mm
Ø 4.3 mm
Ø 5.0 mm
Ø 3.3
Ø 4.5
5.5 mm 6.5 mm4.5 mm3.5 mm2.5 mm1.5 mm0.8 mm
106.182 106.168 106.169 106.170 106.183 106.184 106.185
106.175 106.171 106.172 106.173 106.174 106.180 106.181
Gingival Height
036 037
Hex Screwdriver Torque Connection
1.6mm
CM Abutment:: Minimum interocclusal space of 5.0mm from the mucosa level; :: Single-unit screw-retained prostheses;
:: Recommended for posterior restorations.
Cone Morse | CM Abutment Cone Morse | CM Abutment
5.5 mm 6.5 mm4.5 mm3.5 mm2.5 mm1.5 mm0.8 mm
115.162 115.147 115.148 115.152 115.163 115.164 115.165
CM Abutment
:: Note recommended torque and corresponding sequence on page 36.
Ø 4.8 mm
Ope
n Tr
ay
CM Abutment Analog
Clos
ed T
ray
32N.cm
CM Abutment
CM AbutmentImpression Coping
Torque Wrench
CM AbutmentProtection Cylinder
CM Abutment Coping
Castable, Titanium and CoCr
Hex Screwdriver Torque Connection
1.2mm Torque Wrench
OpenTray
ClosedTray
108.039 108.040
CM Abutment Impression Coping
:: Available in Titanium;:: Crown.
106.102CM Abutment Protection Cylinder
101.037CM Abutment Analog
Castable Titanium CoCr
118.180 118.179 118.242
CM Abutment Coping
:: Available: Titanium: Provisional prostheses; CoCr: Overcasting; Castable: Casting;:: Screw included;:: Crown.
Neotorque Titanium
123.012
116.228
CM Abutment Polishing Protector
CM Abutment Coping Screw
:: Note recommended torque;:: Use screwdriver 1.2mm (105.005);:: For torque control, use Torque Wrench (104.050). Neotorque :: Application of a film carbon-based coat that
provides a lower friction coefficient, resulting inincreased pre-load.
10N.cm
116.038
:: Lab use.
038 039
5.5 mm 6.5 mm4.5 mm3.5 mm
3.5 mm
3.5 mm
2.5 mm
2.5 mm
2.5 mm
1.5 mm
1.5 mm
1.5 mm
Neotorque Titanium
OpenTray
ClosedTray
0.8 mm
115.166
115.206
101.020
106.054
123.008
108.022
115.154
115.167
115.207
116.227
108.021
115.149
115.168
115.208
115.150 115.151 115.153 115.160 115.161
115.169
115.209
115.170
115.210
115.171
115.211
CM Mini Conical Abutment
17º / 30º CM Mini Conical Abutment (non-indexed)
17º / 30º CM Exact Mini Conical Abutment (indexed)
Mini Conical Abutment Analog
Mini Conical Abutment Protection Cylinder
Mini Conical Abutment Polishing Protector
CM Mini Conical Abutment Coping Screw
Mini Conical Abutment Impression Coping
:: Note recommended torque and corresponding sequence on page 38.
:: Height of CM angled prosthetic abutments available on page 51;
:: Non-indexed.
:: Height of CM angled prosthetic abutments available on page 51;
:: Indexed.
:: Note recommended torque;:: Use screwdriver 1.2mm (105.005);:: For torque control, use Torque Wrench (104.050);
:: Bridge.
CM Mini Conical Abutment17° / 30° CM and Exact Mini Conical Abutment
Ø 4.8 mmØ 4.8 mm
CM MiniConical Abutment
17º / 30º CM ad Exact MiniConical Abutment
Mini Conical AbutmentImpression Coping
Hex Screwdriver Torque Connection
1.2mm
Prosthetic Abutments
Driver
Hex Screwdriver Torque Connection
0.9mm
Torque Wrench
Torque Wrench
Ope
n Tr
ay
Clos
ed T
ray
Mini ConicalAbutment Analog
Mini Conical AbutmentProtection Cylinder
Mini ConicalAbutment Coping
Castable, Titanium and CoCr
:: Minimum interocclusal space of 4.4 mm from mucosa level for straight abutments;
:: Multiple screw-retained prostheses.
17º
17º
30º
30º
Neotorque :: Application of a film carbon-based coat that provides a lower friction coefficient, resulting in increased pre-load.
Cone Morse | CM Mini Conical Abutment, 17° / 30° and Exact Cone Morse | CM Mini Conical Abutment, 17° / 30° and Exact
Mini Conical Abutment Coping
:: Available in: Titanium: Provisional Prostheses; CoCr: Overcasting; Castable: For Casting;:: Screw included;:: Bridge
32N.cm
15N.cm
10N.cm
116.037
Castable Titanium CoCr Distal Bar
118.112 118.113 118.209 118.169
:: Lab use
040 041
CM Micro Conical Abutment:: Minimum interocclusal space of 3.5 mm from mucosa level; :: Multiple screw retained prostheses;
:: Recommended for CM Implants close to each other.
Ø 3.5 mm
Cone Morse | CM Micro Conical Abutment Cone Morse | CM Micro Conical Abutment
4.5 mm3.5 mm2.5 mm1.5 mm0.8 mm
115.212 115.200 115.201 115.202 115.213
CM Micro Conical Abutment
:: Note recommended torque and corresponding sequence aonpage 40.
Prosthetic Abutments Driver
Torque Wrench
CM Micro Conical Abutment
CM Micro ConicalAbutment
Impression Coping
Ope
n Tr
ay
Micro ConicalAbutment Analog
Micro Conical AbutmentProtection Cylinder
Micro Conical Abutment Coping
Castable, Titanium and CoCr
Hex Screwdriver Torque Connection
1.2mm
Torque Wrench
Open Tray
108.070
CM Micro Conical Abutment Impression Coping
:: Bridge.
Neotorque Titanium
101.057
123.015
116.227 116.037
CM Micro Conical Abutment Analog
CM Micro Conical Abutment Protection Cylinder
CM Mini Conical Abutment Coping Screw
:: Please note recommended torque; :: Use screwdriver 1.2mm (105.005);:: For torque control, use Torque Wrench (104.050). Neotorque :: Application of a film carbon-based coat that
provides a lower friction coefficient, resulting in increased pre-load.
32N.cm
10N.cm
106.199CM Micro Conical Abutment Protection Cylinder
Castable Titanium CoCr
118.247 118.246 118.245
CM Micro Conical Abutment Coping
:: Available in: Titanium: Provisional Prostheses; CoCr: For overcasting; Castable: For casting.:: Screw included;:: Bridge.
:: Lab use.
042 043
CM Anatomic Abutment and CMAnatomic Abutment 17o
CM Anatomic Abutment and CM Anatomic Abutment 17o
CM ImplantImpression Coping
CM ImplantAnalog
Hex ScrewdriverTorque Connection 0.9mm
Hex ScrewdriverTorque Connection 0.9mm
ProsthesesCompleted
Customization,if needed
Conventionalimpression
Lab Stage
Torque Wrench
Torque Wrench
Optional SequenceRecommended SequenceCl
osed
Tra
y
Ope
n Tr
ay
3.5 mm
3.5 mm
2.5 mm
2.5 mm
1.5 mm
1.5 mm
114.328
114.419
114.329
114.420
114.330
114.421
CM Anatomic Abutment (non-indexed)
CM Lateral Anatomic Abutment (non-indexed)
:: Note recommended torque and corresponding sequence aonpage 42.
:: CM Anatomic Abutment height available on page 51.
:: Note recommended torque and corresponding sequence on page 42.
:: CM Anatomic Abutment height available on page 51.
101.058CM Implant Analog
Cone Morse | CM Anatomic Abutment and 17o Cone Morse | CM Anatomic Abutment and 17o
15N.cm
15N.cm
:: Anatomic Abutment heights available on page 53.
CM Anatomic Abutment CM Anatomic Abutment 17° (non-indexed):: Cement-retained prostheses; :: Customizable; :: Recommended for anterior zone.
3.5 mm
3.5 mm
2.5 mm
2.5 mm
1.5 mm
1.5 mm
114.460
114.463
114.461
114.464
114.462
114.465
CM Anatomic Abutment 17o (non-indexed)
CM Lateral Anatomic Abutment 17o (non-indexed)
:: Note recommended torque and corresponding sequence on page 42.
:: CM Anatomic Abutment height available on page 51.
:: Note recommended torque and corresponding sequence on page 42.
:: CM Anatomic Abutment height available on page 51.
CM Implant Impression Coping (non-indexed)Open Tray
Closed Tray
108.150
108.151
108.148
108.149
Conventional
Long
044 045
CM Exact Anatomic Abutment CM Exact Anatomic Abutment 17° (indexed):: Cement-retained prostheses; :: Customizable; :: Recommended for anterior zone.
CM Exact Anatomic Abutment andCM Exact Anatomic Abutment 17o
CM Exact Anatomic Abutment andCM Exact Anatomic Abutment 17o
CM Exct ImplantImpression Coping
CM ImplantAnalog
Hex ScrewdriverTorque Connection 0.9mm
Hex ScrewdriverTorque Connection 0.9mm
Customization,if needed
Conventionalimpression
Lab Stage
Torque Wrench
Torque Wrench
Optional SequenceRecommended Sequence3.5 mm
3.5 mm
2.5 mm
2.5 mm
1.5 mm
1.5 mm
114.454
114.457
114.455
114.458
114.456
114.459
CM Exact Anatomic Abutment 17° (indexed)
CM Exact Anatomic Abutment 17° (indexed)
CM Implant Impression Coping (indexed)
:: Note recommended torque and corresponding sequence on page 44.
:: CM Anatomic Abutment height available on page 51.
:: Note recommended torque and corresponding sequence on page 44.
:: CM Anatomic Abutment height available on page 51.
Open Tray
Closed Tray
108.152
108.153
108.154
108.155
Conventional
Long
101.058CM Implant Analog
Cone Morse | CM Exact Anatomic Abutment and 17º Cone Morse | CM Exact Anatomic Abutment and 17º
15N.cm
15N.cm
Clos
ed T
ray
Ope
n Tr
ay
:: Anatomic Abutment heights available on page 53.
3.5 mm
3.5 mm
2.5 mm
2.5 mm
1.5 mm
1.5 mm
114.422
114.425
114.423
114.426
114.424
114.427
CM Exact Anatomic Abutment (indexed)
CM Exact Lateral Anatomic Abutment (indexed)
:: Note recommended torque and corresponding sequence on page 44.
:: CM Anatomic Abutment height available on page 51.
:: Note recommended torque and corresponding sequence on page 44.
:: CM Anatomic Abutment height available on page 51.
ProsthesesCompleted
046 047
4 m
m
CM Universal Abutment17° / 30° CM Universal Abutment (non-indexed):: Cemented-retained single-unit prostheses.
Hex Screwdriver Torque Connection
0.9mm
Universal AbutmentImpression Coping
CM UniversalAbutment
17º / 30º CMUniversal Abutment
Torque Wrench
Universal AbutmentAnalog
Universal AbutmentCopings
Provisional and Castable
2.5 mm
2.5 mm
2.5 mm
2.5 mm
2.5 mm
2.5 mm
5.5 mm 6.5 mm
5.5 mm 6.5 mm
1.5 mm
1.5 mm
1.5 mm
1.5 mm
1.5 mm
1.5 mm
4.5 mm
4.5 mm
0.8 mm
0.8 mm
3.5 mm
3.5 mm
3.5 mm
3.5 mm
3.5 mm
3.5 mm
114.129
114.130
114.079
114.091
114.103
114.088
114.094
114.106
114.077
114.089
118.181
118.182
108.042
108.060
114.101
114.086
114.092
108.043
108.061
114.104
114.136
114.139
114.078
114.090
118.192
118.193
114.102
114.087
114.093
114.105
114.137 114.138
114.140 114.141
114.131
114.132
114.082
114.097
114.109
114.085
114.100
114.112
114.080
114.095
118.183
118.184
108.044
108.062
114.107
114.083
114.098
108.045
108.063
114.110
114.142
114.145
114.081
114.096
118.194
118.195
114.108
114.084
114.099
114.111
114.143 114.144
114.146 114.147
CM Universal Abutment(non-indexed)
17º / 30º CM Universal Abutment (non-indexed)
Universal Abutment Impression Coping
Universal Abutment Set
:: Note recommended torque and corresponding sequence on page 46;
:: Universal Abutment height available on page 50.
:: Note recommended torque and corresponding sequence on page 46.
:: Angled universal abutment height available on page 50.
:: Available in: Acrylic: For provisional prostheses; Castable. For casting:: Compatible with all Universal
Abutments, when not modified.
:: Includes Impression Coping and Castable and Provisional Copings.
:: Available in polymer;:: For closed Tray technique;:: Crown.
Ø 3.3
Ø 3.3
Ø 3.3
Ø 3.3
Ø 3.3
Ø 3.3
Ø 3.3
Ø 3.3
17o
30o
17o
30o
Ø 3.3
Ø 3.3
Ø 3.3
Ø 3.3
Ø 4.5
Ø 4.5
Ø 4.5
Ø 4.5
Ø 4.5
Ø 4.5
Ø 4.5
Ø 4.5
Ø 4.5
Ø 4.5
Ø 4.5
Ø 4.5
4 m
m
4 m
m6
mm
4 m
m4
mm
4 m
m
6 m
m
6 m
m6
mm
6 m
m6
mm
Castable
Castable
Provisional
Provisional
Universal Abutment Coping
15N.cm
32N.cm
Cone Morse | CM Universal Abutment and 17° / 30° CM Universal Abutment Cone Morse | CM Universal Abutment and 17° / 30° CM Universal Abutment
Hex Screwdriver Torque Connection
1.2mm
101.038
101.039
101.040
101.041
Universal Abutment Analog Ø 3.3
Ø 3.3
Ø 4.5
Ø 4.5
4 m
m6
mm
048 049
CM Exact Universal Abutment (indexed)17° / 30° CM Exact Universal Abutment:: Cemented-retained single-unit prostheses;
:: Recommended for customization or laboratory use.
Hex Screwdriver Torque Connection
0.9mm
17º / 30º CM ExactUniversal Abutment
CM ExactUniversal Abutment
Torque Wrench
2.5 mm
2.5 mm
2.5 mm
2.5 mm
2.5 mm
2.5 mm
5.5 mm 6.5 mm
5.5 mm 6.5 mm
1.5 mm
1.5 mm
1.5 mm
1.5 mm
1.5 mm
1.5 mm
4.5 mm
4.5 mm
0.8 mm
0.8 mm
3.5 mm
3.5 mm
3.5 mm
3.5 mm
3.5 mm
3.5 mm
114.408
114.409
114.362
114.386
114.398
114.368
114.389
114.401
114.360
114.384
114.396
114.366
114.387
114.399
114.363
114.369
114.361
114.385
114.397
114.367
114.388
114.400
114.364 114.365
114.370 114.371
114.410
114.411
114.359
114.392
114.404
114.342
114.395
114.407
114.357
114.390
114.402
114.340
114.393
114.405
114.372
114.375
114.358
114.391
114.403
114.341
114.394
114.406
114.373 114.374
114.376 114.377
CM Exact Universal Abutment
17º / 30º CM Exact Universal Abutment
Ø 3.3
Ø 3.3
Ø 3.3
Ø 3.3
17o
30o
17o
30o
Ø 3.3
Ø 3.3
Ø 4.5
Ø 4.5
Ø 4.5
Ø 4.5
Ø 4.5
Ø 4.5
4 m
m
4 m
m4
mm
6 m
m
6 m
m6
mm
15N.cm
Cone Morse | CM Universal Abutment and 17° / 30° CM Universal Abutment Cone Morse | CM Universal Abutment and 17° / 30° CM Universal Abutment
:: Note recommended torque and corresponding sequence on page 48;
:: Abutment with floating screw.
:: CM Universal Abutment height available on
page 50.
:: Note recommended torque and corresponding sequence on
page 48;:: :: Angled universal abutment
height available on page 50.
101.058CM Implant Analog
CM ImplantAnalog
ProsthesesCompleted
CM Exct ImplantImpression Coping
Clos
ed T
ray
Ope
n Tr
ay
CM Implant Impression Coping (indexed) Open Tray
Closed Tray
108.152
108.153
108.154
108.155
Conventional
Long
050 051
8 m
m
CM Anatomic Abutment
6 m
m
Ging
ival
hei
ght
5 mm6 mm
Anatomic Abutment
17º CM Anatomic Abutment
2.8
mm
2.8
mm
3.8
mm
3.8
mm
4.8
mm
7 mm
8.3 mm
4.5 mm
5.6 mm
4.8
mm
3.5
mm
3.5
mm
2.5
mm
2.5
mm
1.5m
m
1.5m
m
17° CM Anatomic Abutment17° CM Lateral Anatomic Abutment
CM Lateral Anatomic Abutment
6.5
mm
5.3
mm
Ging
ival
hei
ght
4.3 mm4.7 mm
Cone Morse Cone Morse
Cem
enta
ble
Hei
ght
4 /
6 m
m
Gin
giva
l H
eigh
tProfile
3.3 / 4.5 mm
4 m
m
Ø 4.5 mm4
mm
Ø 3.3 mm
6 m
m
Ø 4.5 mm
6 m
m
Ø 3.3 mm
Universal Abutment
17º/30º Universal Abutment
Ø 3.3 / 17º
Ø 3.3 / 30º
Ø 4.5 / 17º
Ø 4.5 / 30º
5.80
4.50
5.20
4.90
4.80
3.50
4.20
3.90
3.80
2.50
3.20
2.90
3.50
3.50
3.50
3.50
2.50
2.50
2.50
2.50
1.50
1.50
1.50
1.50
17º/30º CM Mini Conical Abutment30º17º
4.90
3.50
5.90
3.50
3.90
2.50
4.90
2.50
2.90
1.50
3.90
1.50
CM Anatomic Abutment, 17° CM Anatomic Abutment and 17º/30º CM Mini Conical Abutment Dimension
CM Universal Abutment and 17º/30º CM Universal Abutment Dimension
052 053
5.5 mm4.5 mm3.5 mm2.5 mm1.5 mm
102.132 102.133 102.134 102.135 102.136
CM Equator Attachment
:: Note recommended torque and corresponding sequence.
Cone Morse | Attachment CM Cone Morse | Attachment CM
O’ring with cylinder
O’ring
Multiuse Tool
O’ring Extractor Tool
Protection Disk
Multiuse Tool
O’ring Extractor Tool
102.077
104.054
104.055
104.053
:: Protection Disk included;:: Titanium cylinder and polymer o’ring.
:: Available in polymer; Purple: more retention; Black: lab stage.
:: Package with 10 units.
:: Multiuse tool with Cylinder’s Oríng repositon function;
:: The pieces are sold separately.O’ring Insertion Tool
CM Equator Attachment
:: Recommended in-mouth capture, one Abutment at a time;
:: Impression with positioner is required only for Mini Ball Attachment;
:: O´ring with Cylinder includes Protection Disk;
:: Equator Attachment allows angulation up to 30˚ between two implants.
O’ring with Cylinder
ProtectionDisk
CM EquatorAttachment
Hex Screwdriver torqueconnection 1.2 mm
Torque wrench
32N.cm
Pink
Purple
Black
102.108
102.115
102.118
102.107
Equator Attachment
Equator Attachment
054 055Cone Morse Facility Cone Morse Facility
ABUTMENT INDICATION TABLE
•Facility Micro Conical Abutment (multiple-unit)
•Facility Anatomic Abutment
•Facility Attachment Equator • Facility Micro Conical Abutment (in addition to regular implants)
2.9 mm
Screw-retainedProsthetics
Cemented-retainedProsthetics Overdenture Hybrid
FACILITY
Cone MorseFacility
Ø 2.2 mm
Ø 2.9
5° Angle
056 057
Facility2.0
Initial Facility10
Facility12
FacilityBone Tap
Facility14
:: 2.9mm small diameter implant;:: Double lead thread design;
:: Recommended for bone types I, II, III and IV;:: Instrumental line optimized;
:: Exclusive prosthetic abutment line;.:: Drilling speed: 500 - 800 rpm;
:: Placement speed: 30 rpm;:: Maximum insertion torque: 45N.cm.
:: Cylindrical body implant with exclusiveMorse Taper (CM) connection
PRODUCTFEATURES:
* Optional for bone types I and II.
4.5 mm3.5 mm2.5 mm1.5 mm
106.200 106.201 106.202 106.203:: The 1.5 mm Healing Abument can
also be used as Cover screw.
Facility Healing Abutments
103.330 103.341 103.343103.331 103.342 111.035
DRILL SEQUENCE
10mm
12mm
14mm
Cone Morse | Facility Acqua Cone Morse | Facility Acqua
Ø 2.9
10.0 mm 12.0 mm 14.0 mm
140.737 140.738 140.739
058 059
Facility2.0
Initial Facility10
Facility12
FacilityBone Tap
Facility14
Cone Morse | Facility Cone Morse | Facility
:: 2.9mm small diameter implant;:: Double lead thread design;
:: Recommended for bone types I, II, III and IV;:: Instrumental line optimized;
:: Exclusive prosthetic abutment line;.:: Drilling speed: 500 - 800 rpm;
:: Placement speed: 30 rpm;:: Maximum insertion torque: 45N.cm.
:: Cylindrical body implant with exclusiveMorse Taper (CM) connection
PRODUCTFEATURES:
* Optional for bone types I and II.
Ø 2.9
4.5 mm3.5 mm2.5 mm1.5 mm
106.200 106.201 106.202 106.203:: The 1.5 mm Healing Abument can
also be used as Cover screw.
Facility Healing Abutments
103.330 103.341 103.343103.331 103.342 111.035
DRILL SEQUENCE
10mm
12mm
14mm
10.0 mm 12.0 mm 14.0 mm
109.737 109.738 109.739
060 061
Facility Micro Conical Abutment:: Minimum interocclusal space of 3.5 mm from mucosa level;
:: Multiple screw-retained prostheses.
Ø 3.5 mm
Cone Morse | Facility Micro Conical Abutment Cone Morse | Facility Micro Conical Abutment
3.5 mm 4.5 mm2.5 mm1.5 mm
115.215 115.216 115.217 115.224
Facility Micro Conical Abutment
Open Tray
108.070
CM Micro Conical Abutment Impression Coping
:: Available in Titanium;:: Bridge.
Neotorque Titanium
101.057
123.015
116.227 116.037
CM Micro Conical Abutment Analog
CM Micro Conical Abutment Polishing Protector
CM Abutment Cylinder Screw
:: Note recommended torque;:: Use screwdriver 1.2mm (105.005);:: For torque control, use Torque Wrench (104.050). Neotorque :: Application of a film carbon-based coat that
provides a lower friction coefficient, resulting inincreased pre-load.
106.199CM Micro Conical Abutment Protection Coping
Castable Titanium CoCr
118.247 118.246 118.245
CM Micro Conical Abutment Coping
:: Available in: Titanium: Provisional Prostheses; CoCr: Overcasting; Castable: For casting;:: Screw included;:: For bridge.
Facility MicroConical Abutment
Facility Abutment Placement Aid
CM Micro ConicalAbutment
Impression Coping
Ope
n Tr
ay
CM Micro ConicalAbutment Analog
CM Micro ConicalAbutment Protection
Cylinder
CM Micro ConicalAbutment
Coping
Castable, Titanium and CoCr
Hex Screwdriver Torque Connection
1.2mm
TorqueWrench
10N.cm
062 063
Facility Anatomic Abutment:: Cemented-retained single-unit prostheses; :: Customizable; :: Recommended for anterior zone.
CM ImplantImpression Coping
CM ImplantAnalog
Facility AnatomicAbutment
Optional Sequence
3.5 mm2.5 mm1.5 mm
114.442 114.443 114.444
Facility Anatomic Abutment
Facility Implant Impression CopingClosed Tray
108.107
101.061Facility Implant Analog
Cone Morse | Facility Anatomic Abutment Cone Morse | Facility Anatomic Abutment
Facility Abutment Placement Aid
Lab Stage
Prosthesis Completed
064 065
Facility Equator Attachment
O’ring with Cylinder for Equator Attachment
Protection Disk
Facility Equator Attachment
4.5 mm3.5 mm2.5 mm1.5 mm
102.100 102.102 102.104 102.105
Facility Equator Attachment
O’ring with Cylinder for Equator Attachment
O’ring
Multiuse Tool
O’ring Extractor Tool
Protection Disk
Pink
Purple
Black
Equator Attachment
102.077
102.107
102.108
102.115
102.118
Multiuse Tool
O’ring Extractor Tool
O’ring Insertion Tool
104.054
104.055
104.053
:: Available in polymer; Purple: more retention; Black: lab stage.
:: Package with 10 units.
:: Multiuse tool with Cylinder’s Oríng repositon function;
:: The pieces are sold separately.
Cone Morse | Facility Equator Attachment Cone Morse | Facility Equator Attachment
:: Overdenture Prostheses.
:: Allows 30° angulation between two implants.
Facility Abutment Placement Aid
066 067Cone Morse WS Cone Morse WS
ABUTMENT INDICATION TABLE
•WS Abutment (single-unit)•WS Mini Conical Abutment(multiple-unit)
•WS Universal Abutment (single-unit)
•WS Mini Conical Abutment
One Step Hybrid Technique•Castable Mini Conical One Step Hybrid Coping•Titanium Mini Conical One Step Hybrid Coping•Brass Mini Conical One Step Hybrid Coping
4.0 mm5.0 mm6.0 mm
Screw-retainedProstheses
Cement-retained Prostheses Overdenture HybridWS
Inne
r Thr
ead
Ø 1.
8
:: Note: the WS implant has a specific abutment line.
:: The left image shows the mismatch between the CM abutment and the WS implant. The picture on the right
shows the proper fit between a WS abutment and WS implant.
Cone Morse WS
Ø 3.0 mm
Ø Implant
068 069
:: Cylindrical body implant with Cone Morse (Morse Taper) connection;
:: Suited to deal with situations wwhere the availability of bone is reduced;
:: indicated for bone types I and II, alternative for posterior free ended partially edentulous ridge;
:: Pre-assembled;:: Note the specific Pilot Drill (countersink function);
:: Drilling speed: 200 to 300 rpm;:: Placement speed: 30 rpm;
:: Maximum insertion torque: 60N.cm.
PRODUCTFEATURES:
3.5 mm2.5 mm1.5 mm0.8 mm
106.186 106.187 106.188 106.189
WS Cover Screw
:: Use manual screwdriver 1.2mm
(104.012) for placement;
:: Do not exceed 10N.cm torque
:: Use manual screwdriver 1.2mm
(104.012) for placement;
:: Do not exceed 10N.cm torque.
WS Healing Abutments
117.016
DRILL SEQUENCE
:: Exclusive Cone Morse (Morse Taper) prosthetic interface.
Cone Morse WS | TitamaxWS Cone Morse WS | TitamaxWS
5.0 mm 6.0 mm
109.605
109.574 109.575
109.576 109.577
Ø 4.0
Ø 5.0
Ø 6.0
Titamax2.0
Lança Piloto2/3
Titamax3.3
Piloto CM3.3 / 4.0
Titamax4.3
Titamax3.0
Piloto CM3 / 3.75
Titamax3.8
Piloto CM4.3 / 5.0
Ø 4.0 mm
Ø 5.0 mm
Ø 6.0 mm
103.170 103.213 103.166 103.167 103.214 103.215103.164 103.218 103.220 103.221103.162 103.217 103.168 103.169
Titamax5.3
Piloto CM5.3 / 6.0
Piloto CM4.3 / 5.3
Piloto CM3.8 / 4.3
070 071
Hex Screwdrive Torque Connection 1.6mm
WS Abutment:: Minimum interocclusal space of 5.0mm from mucosa level;
:: Single-unit screw-retained prostheses;
:: Recommended for posterior regions.
Cone Morse WS | WS Abutment Cone Morse WS | WS Abutment
3.5 mm2.5 mm1.5 mm0.8 mm
115.180 115.181 115.182 115.183
WS Abutment
:: Note recommended torque and corresponding sequence
Ø 4.8 mm
Ope
n Tr
ay
CM AbutmentAnalog
Clos
ed T
ray
32N.cm
WS Abutment
CM AbutmentImpression Coping
TorqueWrench
CM AbutmentProtection Cylinder
CM Abutment Coping
Castable, Titanium and CoCr
Hex Screwdriver Torque Connection1.2mm
TorqueWrench
OpenTray
ClosedTray
108.039 108.040
CM Abutment Impression Coping
:: Available in Titanium;:: Crown.
106.102CM Abutment Protection Cylinder
101.037CM Abutment Analog
Castable Titanium CoCr
118.180 118.179 118.242
CM Abutment Coping
:: Available: Titanium: Provisional prostheses; CoCr: Overcasting Castable: Casting;:: Screw included;:: Crown.
Neotorque Titanium
123.012
116.228
CM Abutment Polishing Protector
CM Abutment Coping Screw
:: Please note recommended torque; :: Use screwdriver 1.2mm (105.005);:: For torque control, use Torque Wrench (104.050). Neotorque :: Application of a film carbon-based coat that
provides a lower friction coefficient, resulting inincreased pre-load.
10N.cm
116.038
072 073
Neotorque Titanium
OpenTray
ClosedTray
101.020
106.054
123.008
108.022
116.227
108.021
WS Mini Conical Abutment
Mini Conical Abutment Analog
Mini Conical Abutment Protection Cylinder
Mini Conical Abutment Polishing Protector
WS Mini Conical Abutment Cylinder Screw
Mini Conical Abutment Impression Coping
:: Note recommended torque and corresponding sequence.
:: Please note recommended torque;:: Use screwdriver 1.2mm (105.005);:: For torque control, use Torque Wrench (104.050).
:: Available in Titanium;:: Bridge.
WS Mini Conical Abutment
Ø 4.8mm
WS Mini Conical Abutment
Mini Conical AbutmentImpression Coping
Hex Screwdriver Torque Connection
1.2mm
Prosthetic Abutments Driver
TorqueWrench
TorqueWrench
Ope
n Tr
ay
Clos
ed T
ray
Mini ConicalAbutment Analog
Mini Conical AbutmentProtection Cylinder
Mini ConicalAbutment Coping
Castable, Titanium and CoCr
:: Minimum interocclusal space of 4.4 mm from mucosa level;
:: Multiple screw-retained prostheses.
Neotorque :: Application of a film carbon-based coat that provides a lower friction coefficient, resulting in increased pre-load.
Cone Morse WS | WS Mini Conical Abutment Cone Morse WS | WS Mini Conical Abutment
Mini Conical Abutment Coping
:: Available in: Titanium: Provisional Prostheses; CoCr: Overcasting; Castable: For Casting;:: Screw included;:: Bridge
32N.cm
10N.cm
116.037
Castable Titanium CoCr Distal Bar
118.112 118.113 118.209 118.169
3.5 mm2.5 mm1.5 mm0.8 mm
115.176 115.177 115.178 115.179
074 075
4 m
m
WS Universal Abutment:: Cemented-retained prostheses.
Universal AbutmentImpression Coping 4.5
WS UniversalAbutment
WS UniversarAbutment
TorqueWrench
TorqueWrench
CM Universal AbutmentAnalog 4.5
Universal AbutmentCoping 4.5
Provisional and Castable
Prostheses Completed
Lab Stage
118.183
118.184
108.044
108.062
108.045
108.063
118.194
118.195
Universal Abutment Impression Coping
Universal Abutment Set
:: Available in: Acrylic: For provisional prostheses; Castable: For Casting.:: Compatible with all Universal
Abutments,when not modified.
:: Includes Impression Coping and Castable and Provisional Copings.
:: Available in polymer;:: For closed Tray technique;:: Crown.
Ø 4.5
Ø 4.5
Ø 4.5
Ø 4.5
Ø 4.5
Ø 4.5
6 m
m4
mm
4 m
m6
mm
6 m
m
Castable
Castable
Provisional
Provisional
Universal Abutment Coping
32N.cm
32N.cm
Cone Morse WS | WS Universal Abutment Cone Morse WS | WS Universal Abutment
Hex Screwdriver Torque Connection 1.2mm
Hex Screwdriver Torque Connection
1.2mm
101.040
101.041
Universal Abutment Analog
Ø 4.5
Ø 4.5
4 m
m6
mm
2.5 mm
2.5 mm
1.5 mm
1.5 mm
0.8 mm
0.8 mm
3.5 mm
3.5 mm
114.183
114.187
114.186
114.190
114.184
114.188
114.185
114.189
WS Universal Abutment
Ø 4.5
Ø 4.5
4 m
m6
mm
:: Note recommended torque and corresponding sequence.
:: Closed Tray
108.064
101.055
WS Implant Impression Coping
WS Implant AnalogOptional Sequence Recommended Sequence
WS ImplantImpression Coping
Closed Tray
WS ImplantAnalog
076 077Zygomatic Zygomatic
CM and External Hex (HE) Zygomatic
Hex 2.7 mm
Ø 4.1 mm
0.7 mm
Ø 3.0 mm
The acquisition of products of this technique requires specific accreditation
078 079
:: Cylindrical implant body design;:: Smooth surface;:: Pre-assembled;
:: Double and progressive thread design;:: Exclusive Cone Morse (Morse Taper)prosthetic interface.
PRODUCTFEATURES:
CM Zygomatic Cover Screw
:: Use manual screwdriver 1.2 mm
(104.012) for placement;
:: Do not exceed 10N.cm torque.
117.016
CM Zygomatic CM Zygomatic
Ø 4.4 mm
Nom
inal
leng
th
Ø 3.9 mm
2.7 Twist Drillfor Zygomatic
2.7 / 3.3 Pilot Twist Drill for Zygomatic
3.3/ 3.7 Pilot Twist Drill for Zygomatic
3.3 Twist Drill for Zygomatic
CM Countersink Drill for Zygomatic
2.9 Spherical Drill for Zygomatic
DRILL SEQUENCE
103.190 103.191 103.192 103.193 103.208 103.197
30.0 mm 35.0 mm 45.0 mm40.0 mm 47.5 mm 50.0 mm 52.5 mm
109.522 109.523 109.525109.524 109.526 109.527 109.528
* Optional
080 081External Hex Zygomatic External Hex Zygomatic
:: Cylindrical implant body design;:: Smooth surface;:: Pre-assembled.
PRODUCTFEATURES:
30.0 mm 35.0 mm 45.0 mm40.0 mm 47.5 mm 50.0 mm 52.5 mm
109.460 109.450 109.452109.451 109.461 109.453 109.454
Zygomatic Cover Screw
:: Use manual screwdriver 0.9 mm
(104.041) for placement;
:: Do not exceed 10N.cm torque.
117.018
Ø 4.4 mm
Nom
inal
leng
th
Ø 3.9 mm
DRILL SEQUENCE
103.190 103.191 103.192 103.193 103.208
* Optional
2.7 Twist Drillfor Zygomatic
2.7 / 3.3 Pilot Twist Drill for Zygomatic
3.3/ 3.7 Pilot Twist Drill for Zygomatic
3.3 Twist Drillfor Zygomatic
2.9 Spherical Drill for Zygomatic
082 083
Ø 4.8 mmØ 4.8 mm
Transepithelial Abutment:: Minimum interocclusal space of 4.5 mm from mucosa level;
:: Multiple screw-retained prostheses.
Zygomatic / Transepithelial Abutment Zygomatic / Transepithelial Abutment
5 mm 6 mm
5 mm
4 mm
4 mm
3 mm
3 mm
115.172
115.023
115.173
115.024
115.174 115.175
115.025
CM Transepithelial Abutment
HE Transepithelial Abutment
:: Use screwdriver Prosthetic Abutment Driver (105.009);
:: For torque control, use Torque Wrench (104.050).
Ope
n Tr
ay
32N.cm
20N.cm
10N.cm
CM Transepithelial Abutment
Transepithelial Abutment
Transepithelial AbutmentImpression Coping
TorqueWrench
Transepithelial Abutment
Protection Cylinder
Castable and CoCr
Hex ScrewdriverTorque Connection
1.2mm
TorqueWrench
108.026Transepithelial Abutment Impression Coping
:: Bridge.
106.056Transepithelial Abutment Protection Cylinder
101.018Transepithelial Abutment Analog
Castable
Open Tray
CoCr
118.034 118.254
Transepithelial Abutment Coping
:: Available in: CoCr: For overcasting; Castable: For casting.:: Screw included.
Neotorque Titanium
116.231
Transepithelial Abutment Coping Screw
:: Please note recommended torque;:: Use screwdriver 1.2mm (105.005);:: For torque control, use Torque Wrench (104.050).
Neotorque :: Application of a film carbon-based coat that provides a lower friction coefficient, resulting in increased pre-load.
116.004
ProstheticAbutments Driver
TransepithelialAbutment Analog
Transepithelial AbutmentCoping
084 085Orthodontic Anchorage Orthodontic Anchorage
OrthodonticAnchorage
Hex diameter:2.7 mm
Hole Diamter: 0.7mm
1 m
m
086 087
:: Available in Titanium alloy as per ASTM-F136 (V);:: Implants for orthodontic movement;
:: Self-perforating;:: Collar height;- Low: 0 mm;
- Medium: 1 mm.
PRODUCT FEATURES:
:: Torque resistance of up to 10 Ncm (Ø 1.3 mm) and 20 Ncm (Ø 1.6 mm);:: Drilling speed: 200 rpm;
:: Placement speed: 30 rpm.
Orthodontic Anchorage Orthodontic Anchorage
Ø 1.3
Ø 1.3
Ø 1.6
Ø 1.6
5 mm
5 mm
7 mm
7 mm
11 mm
11 mm
9 mm
9 mm
109.484
109.487
109.486
109.489
109.485
109.488
109.701
109.702
109.493
109.496
109.495
109.498
109.494
109.497
Low Collar
Medium Collar
Implant capture with Orthodontic
Anchorage Contra-Angle Connection.
Implant placement with Contra-Angle
Connections (105.039 or 105.040).
Option of manual implant insertion using a Handle Anchorage Implant Driver (104.033) or Torque Wrench Adaptor for Contra-Angle Connections (105.025).
Implant placed.Orthodontic Anchorage Implant Package.
Remove the cap to access the implant.
1 2 3 4 5 6
088 089Bone Grafting Bone Grafting
BoneGrafting
ExpandedHead
StandardHead
Ø 2.0 mm Ø 3.0 mmØ 3.85 mm
Ø 1.5 mm Ø 2.5 mmØ 3.70mm
090 091
:: Available in Titanium;:: Fixation of bone block graft;
:: Self-perforating;:: Drilling speed: 200 rpm;
:: Placement speed: 30 rpm.
PRODUCT FEATURES:
Bone Grafting Bone Grafting
Ø 1.5
Ø 1.5
Ø 2.0
Ø 2.0
6 mm 8 mm
8 mm
12 mm
12 mm
14 mm
14 mm
10 mm
10 mm
116.196
116.210
116.194 116.199
116.212
116.200
116.213
116.198
116.211
116.203 116.205
116.214
116.209
116.216
116.207
116.215
Standard Head
Expanded Head
Screw for Gingival Graft
116.245Ø 1.6
5 mm
092 093
Articles
Note: Items that compose Neodent Kits are sold separately.
110.263
104.018
105.063
105.023
103.045
103.079
103.044
103.043
103.078
103.042
103.071
104.033
105.039
105.040
105.025
Bone Grafting and Orthodontic Anchorage Kit Case
Bone Grafting Manual Driver
Philips Connection for Manual Driver
Philips Connection for Contra-Angle
Dril l 1.6 for Contra-Angle
Dril l 1.3 for Contra-Angle
Dril l 1.1 for Contra-Angle
Dril l 1.6 for Straight Piece
Dril l 1.3 for Straight Piece
Dril l 1.1 for Straight Piece
Punch for Bone Grafting/Orthodontic Anchorage
Orthodontic Anchorage Implant Driver
Anchorage Implant Driver Contra-Angle Connection - Long
Anchorage Implant Driver Contra-Angle Connection - Short
Torque Wrench Adaptor for Contra-Angle Connections
KIT FEATURES:
Bone Grafting and Orthodontic Anchorage Kit
:: :: Autoclavable polymer case.
Bone Grafting | Bone Grafting and Orthodontic AnchorageKit Bone Grafting | Bone Grafting and Orthodontic AnchorageKit
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
094 095
Ø 1.6 mmØ 1.3 mm
Long Wrench
Ø 1.1 mm
Short
Straight Piece
Contra-Angle
103.042
105.040
103.207
103.044
103.078
105.039
103.079
103.043
105.025
103.045
Drills for Orthodontic Anchorage
Punch for Bone Grafting and Orthodontic Anchorage
Orthodontic Anchorage Adaptor Connections
:: Available in stainless steel;:: Recommended for bone types I and II;:: Marks refer to Implant length (5, 7, 9 and 11mm)
:: Available in stainless steel;:: Initial cortical rupture.
:: Connections for placing Anchorage Implants with Torque Wrench and Contra-
Angle;:: Torque Wrench Adaptor Contra-Angle Connections (105.025).
7 mm5 mm
9 mm11 mm
Manual Driver
Contra-Angle
105.063
104.033
104.018
105.023
Orthodontic Anchorage Implant Driver
Bone Grafting Manual Driver
Philips Driver
:: Available in stainless steel;:: Orthodontic Anchorage Implant manual placement.
:: Assists in handling Philips Driver (105.063).
:: Available in stainless steel; :: Screw placement for bone grafting.
Bone Grafting | Bone Grafting and Orthodontic AnchorageKitBone Grafting | Bone Grafting and Orthodontic AnchorageKit
103.071
Punch for Bone Grafting / Orthodontic Anchorage
:: Available in stainless steel;:: Initial cortical rupture.
098 099
KIT FEATURES:
Titamax Guided Surgery Surgical Kit
:: Specific items for the guided surgery technique;:: Autoclavable polymer case;:: Screws, drivers and instruments required for the Neodent Guided Surgery technique;:: Technique indicated for virtual planning and flapless surgical procedure.
Titamax Guided Surgery Surgical Kit Titamax Guided Surgery Surgical Kit
110.285
103.395
103.391
103.392
103.393
103.394
103.390
103.396
103.397
103.398
105.001
105.126
105.127
104.012
125.111
125.112
125.113
129.001
104.050
125.101
125.102
125.100
Titamax Guided Surgery Surgical Kit Case
Guided Surgery Dril l 1.3
Titamax Guided Surgery Dril l 2.0
Titamax Guided Surgery Dril l 2.8
Titamax Guided Surgery Dril l 3.0
Titamax Guided Surgery Dril l 3.3
Narrow Guided Surgery Pilot Dril l
Guided Surgery Pilot Dril l 3.5
Guided Surgery Pilot Dril l 3.75
Guided Surgery Pilot Dril l4.0
Smart/WS Implant Driver - Torque Wrench (short)
Narrow Guided Surgery CM Connection Contra-Angle
Guided Surgery CM Connection Contra-Angle
1.2 Driver
Guided Surgery Dril l Guide 2.0/2.8
Guided Surgery Dril l Guide 3.0/3.3
Narrow Guided Surgery Dril l Guide 2.0/2.8
Titanium Tweezers
Torque Wrench
Guided Surgery guide Stabilizer
Narrow Guided Surgery guide Stabilizer
Guided Surgery guide Clamp
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
2
3
Articles
Note: Items that compose Neodent Kits are sold separately.
100 101
KIT FEATURES:
Conical Implants Guided Surgery Surgical Kit
:: Specific items for the guided surgery technique;:: Autoclavable polymer case;:: Screws, drivers and instruments required for the Neodent Guided Surgery technique;:: Technique indicated for virtual planning and flapless surgical procedure.
Conical Implants Guided Surgery Surgical Kit Conical Implants Guided Surgery Surgical Kit
110.286
103.395
103.381
103.382
103.383
103.390
103.396
103.388
111.039
111.040
111.041
125.092
125.095
125.098
125.097
105.001
105.002
105.126
105.127
104.012
129.001
104.050
125.101
125.102
125.100
Conical Implants Guided Surgery Surgical Kit Case
Guided Surgery Dril l 1.3
Alvim Guided Surgery Dril l 2.0
Alvim Guided Surgery Dril l 3.5
Alvim Guided Surgery Dril l4.3
Narrow Guided Surgery Pilot Dril l
Guided Surgery Pilot Dril l 3.5
Guided Surgery Pilot Dril l 4.3
Alvim Guided Surgery Bone Tap 3.5
Alvim Guided Surgery Bone Tap 4.3
Narrow Alvim Guided Surgery Bone Tap 3.5
Alvim Guided Surgery Dril l Guide 2.0/3.5
Alvim Guided Surgery Dril l Guide 4.3
Alvim Guided Surgery Bone Tap Driver 3.5/4.3
Alvim Narrow Guided Surgery Dril l Guide 2.0/3.5
Smart/WS Implant Driver - Torque Wrench (short)
Smart/WS Implant Driver - Contra-Angle
Narrow Guided Surgery CM Connection - Contra-angle
Guided Surgery CM Connection - Contra-angle
1.2 Driver
Titanium Tweezers
Torque Wrench
Guided Surgery guide Stabilizer
Narrow Guided Surgery guide Stabilizer
Guided Surgery guide Clamp
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
2
3
Articles
Note: Items that compose Neodent Kits are sold separately.
102 103
KIT FEATURES:
Facility Guided Surgery Surgical Kit
:: Specific items for the guided surgery technique;:: Autoclavable polymer case;:: Screws, drivers and instruments required for the Neodent Guided Surgery technique;:: Technique indicated for virtual planning and flapless surgical procedure.
Facility Guided Surgery Surgical Kit Facility Guided Surgery Surgical Kit
110.283
103.395
103.385
103.386
103.387
111.042
125.094
105.111
105.128
104.050
125.100
Facility Guided Surgery Surgical Kit Case
Guided Surgery Dril l 1.3
Facility Guided Surgery Dril l 2.0
Facility Guided Surgery Dril l 2.0/2.4
Facility Guided Surgery Pilot Dril l
Facility Guided Surgery Bone Tap
Facility Guided Surgery Dril l Guide 2.0/2.4
Bone Tap Connection Facility for Torque Wrench
Guided Surgery Facility Connection - Contra-angle
Torque Wrench
Guided Surgery guide Clamp
1
1
1
1
1
1
1
1
1
1
3
Articles
Note: Items that compose Neodent Kits are sold separately.
104 105
KIT FEATURES:
Start Guided Surgery Surgical Kit
:: Specific items for the initial procedures of the guided surgery technique;:: Autoclavable polymer case;:: Conventional surgical kit required to perform the surgical procedure.
Start Guided Surgery Surgical Kit Start Guided Surgery Surgical Kit
110.284
103.395
103.391
103.381
125.100
Start Guided Surgery Surgical Kit Case
Guided Surgery Dril l 1.3
Titamax Guided Surgery Dril l 2.0
Alvim Guided Surgery Dril l 2.0
Guided Surgery guide Clamp
1
1
1
1
3
Articles
Note: Items that compose Neodent Kits are sold separately.
106 107Sleeves for Neodent Guided Surgery System Sleeves for Neodent Guided Surgery System
Sleeves for Neodent Guided Surgery System:: Available in Titanium.
Sleeve for Facility Guided Surgery System (50un)
Sleeve of Drill for Guided Surgery - Start (50un)
Sleeve for Guided Surgery System (50un)
Sleeve for Narrow Guided Surgery System (50un)
Sleeve of Setter for Guided Surgery System (50un)
125.088
125.099
125.108
125.109
125.110
108 109One Step Hybrid One Step Hybrid
One Step Hybrid:: Technique that allows for a passive fit, with no need for welding through cementing the
Titanium cylinder to the metal structure. Used for multiple prostheses and reduces laboratory work times.
Mini Conical Abutment One Step Hybrid Copings
Micro Conical Abutment One Step Hybrid Copings
Transepitelial Abutment One Step Hybrid Copings
CM Abutment One Step Hybrid Copings
Working Screw One Step Hybrid
:: Brass and Titanium copings include screw;:: For Installation, use 1.2 mm torque connection (105.005);:: For torque control, use Torque Wrench (104.050).
:: Brass and Titanium copings include screw;:: For Installation, use 1.2 mm torque connection (105.005);:: For torque control, use Torque Wrench (104.050).
:: Brass and Titanium copings include screw;:: For Installation, use 1.2 mm torque connection (105.005);:: For torque control, use Torque Wrench (104.050).
:: Brass and Titanium copings include screw;:: For Installation, use 1.2 mm torque connection (105.005);:: For torque control, use Torque Wrench (104.050).
:: For laboratory use.:: 116.086 for Mini Conical Abutment4.1, Micro
Conical Abutment and Transepitelial Abutment;:: 116.087 for Mini Conical Abutment 5.0 and CM
Abutment.
Titanium
Titanium
Titanium
Titanium
Brass
Brass
Brass
Brass
Castable
Castable
Castable
Castable
118.250
118.086
118.174
118.248
118.084
118.173
118.249
118.085
118.172
118.083 118.081 118.082
116.086
110 111
One Step Hybrid One Step Hybrid
Castable ring with waxed framework.Brass Copings are placed over analogs, then Castable Copings are fixed by working screws.
Cementing with PanaviaR (Kuraray Med. Inc. Tokyo-Japan) the structure over the Titanium copings.
Please note cementing area.Adapting the framework over model.
Cast framework.
Final inside-mouth view.
Surgical drilling completed, obtainingadequate distance from Distal implant in relation to the mental foramen with 7mm flag.
Positioning of MultifunctionalGuide to obtain intermaxillary ratios. Joining transfers with acrylic resin. After splinting, soft silicone is injected to take the soft tissue impression
Placement of CM Mini Conical Abutments.
Working model with artificial gum.
3
7 9
4
8
1 10 12
14
16
11
13 155
2
6
One Step Hybrid One Step Hybrid
Normalization of alveolar flaps.
Placement of square transfers, replaced by short screws (Mini conical Abutment cylinder screw) and impression copings splinted with acrylic resin.
Castable One Step Hybrid Coping, Brass One Step Hybrid Coping, groovedTitanium One Step Hybrid Coping with lower dimension than the brass, which compensates hiring the mill.
Placement of 5 implants.
Removal of Multi-Funcional Guide and placement of Mini Conical Abutment analogs to the impression copings.
Demonstration SequenceDemonstration Sequence
112 113
Distal Bar:: Technique used to ease mandible rehabilitation, through a provisional hybrid-type prosthesis
supported by implants.
Distal Bar Coping
Distal Bar
Polishing Protector
:: Available in Titanium;:: Retainers to ease joining with acrylic
resin;:: Recommended torque: 10 N.cm;:: For torque, use screwdriver 1.2mm
(105.005).
:: Recommended for distal Implants to reinforce the Cantilever.
:: Available in surgical steel;:: Protection for the lab polishing.
Mini Conical
Abument
Prosthesis wearing, keeping posterior region integrity.
Abutments placed.
Applying selfpolymerizing acrylic resin on copings.
Placement of rubber dike over copings to protect soft tissue.
Wearing, finishing and polishing inferior prosthesis with polishingprotectors.
Removal of inferior prosthesis after resin is polymerized, copings already captured.
Proof of inferior prosthesis wearing(centered occlusion position, no interference on copings).
Placing of copings to central Implants and Distal Bar to distal Implants.
Applying to worn area in lower prosthesis, repositioning insidemouth, patient in occlusion until totalpolymerization.
Applying acrylic resin between copings.
Final posterior inside-mouthview.
Provisional implant supported prosthesis completed.
Distal Bar Distal Bar
1
3
5
7
9
11
2
4
6
8
10
12
Mini Conical
Abument
Mini Conical
Abument
Demonstration Sequence
118.169 118.171
125.011
123.008
125.023
123.012
CMAbutment
CMAbutment
CMAbutment
116 117Titanium Bases
Titanium Bases
CM Exact
Titanium Bases for CEREC ®
Flexibility and Quality for your lab
Designed for single unit milled Zirconium restorations, authentic Neodent Titanium Bases are prostheticcomponents developed to ensure the integrity of the implant abutment connection.
CEREC® is a registred trademark of Sirona Dental Systems GmbH.
0,8 mm1,5 mm2,5 mm3,5 mm4,5 mm
CM
Profile 3.5
Ging
ival
hei
ghtChim
ney
heig
ht:
4 e
6 m
m Platform Diameter Gingival height
Chimney height
Article
4 mm3.5CM Exact
135.113
135.114
135.115
135.116
135.117
0,8
1,5
2,5
3,5
4,5
Platform Diameter Gingival height Chimney heightArticle
4.70 mm4.65
135.191
135.192
135.193
135.194
135.195
135.196
135.197
0,8
1,5
2,5
3,5
4,5
5,5
6,5
CM Exact
Scanbody Impression CopingNeodent Scanbodies can be used for scanning and digitization of the model providing accuracy in determining the analog position.
108.094
108.101
108.102
108.103
108.127
Mini Conical Abutment Scanbody 4.1/4.3
CM Exact Implant Scanbody
Micro Abutment Scanbody
CM and WS Abutment Scanbody
WS Implant Scanbody
Titanium BlocksTitanium blocks that allows customization in CAD/CAM systems.
:: Provides Neodent Original Connections; :: Two diameters for customization: 11.5 e 15.8 mm; :: Screw is included (CM Line).
135.109
135.110
Preface CM Exact Ø11.5mm
Preface CM Exact Ø15.8mm
Blocks and Scanbody Impression Coping
118 119Intraoral Scanbodies and Pro Peek Abutments
Intraoral Scanbodies
Customizable temporary abutment in PEEK
108.137
108.139
108.140
108.141
108.142
108.143
108.144
108.145
108.146
108.147
Mini Conical Abutment Intraoral Scanbody 4.1/4.3 mm
CM Exact Intraoral Scanbody
Micro Conical Abutment Intraoral Scanbody
Abutment Intraoral Scanbody WS and CM
WS Intraoral Scanbody
Universal Abutment Intraoral Scanbody 3.3x4 mm
Universal Abutment Intraoral Scanbody 3.3x6 mm
Universal Abutment Intraoral Scanbody 4.5x4 mm
Universal Abutment Intraoral Scanbody 4.5x6 mm
Facility Intraoral Scanbody
Diameter Gingival heightArticle
4,5
6,0
114.530
114.531
114.532
114.533
114.534
114.535
114.536
114.537
114.538
114.539
114.540
114.541
0.8 mm
1.5 mm
2.5 mm
3.5 mm
4.5 mm
5.5 mm
0.8 mm
1.5 mm
2.5 mm
3.5 mm
4.5 mm
5.5 mm
10
8
9
14
15
4
6
4
6
16
120 121Neodent Kits Neodent Kits
Neodent KitsSurgical Tweezerwith self implantlocking andmillimeter scale forreference duringprocedures.
Surgical and ProstheticWrench (single model)can be disassembledand has torque control.
Direction Indicators are color-coded and numbered to show the exact implant size to be used.
122 123
KIT FEATURES:
Surgical Kit
:: Autoclavable polymer case.Articles
Note: Items that compose Neodent Kits are sold separately.
110.269
103.170
103.171
103.162
103.213
103.163
103.164
103.166
103.167
103.168
103.172
103.173
103.174
103.216
103.217
103.218
103.219
103.220
103.331
103.341
103.342
103.343
111.035
105.111
103.091
105.001
105.018
105.002
105.073
105.074
105.075
105.104
105.109
128.015
128.027
128.019
128.020
128.021
128.022
128.023
104.056
104.041
104.012
104.028
104.050
129.004
129.001
Surgical Kit Case
Initial Drill
Alvim Twist Drill 2.0
Twist Drill 2.0
Pilot Drill 2.0/3.0
Twist Drill 2.8
Twist Drill 3.0
Twist Drill 3.3
Twist Drill 3.8
Twist Drill 4.3
Alvim Drill 3.5
Alvim Drill 4.3
Alvim Drill 5.0
CM Pilot Drill 2.8/3.5
CM Pilot Drill 3.0/3.75
CM Pilot Drill 3.3/4.0
CM Pilot Drill 3.6/4.3
CM Pilot Drill 4.3/5.0
Facility Twist Drill 2.0
Facility Drill 10
Facility Drill 12
Facility Drill 14
Facility Bone Tap
Bone Tap Connection Facility For Torque Wrench
Drill Extension
WS Implant Driver - Torque Wrench (Short)
Hex Connection - Torque Wrench (Long)
WS Implant Driver - Contra-Angle
CM Implant Driver - Torque Wrench (Short)
CM Implant Driver - Torque Wrench (Long)
CM Implant Driver - Contra-Angle
Contra-Angle Facility Connection
Long Facility Connection For Torque Wrench
CM Height Measurer
Facility Height Measurer
Direction Indicator 2.8/3.5
Direction Indicator 3.0/3.75
Direction Indicator 3.3/4.0
Direction Indicator 3.6/4.3
Direction Indicator 4.3/5.0
Facility Abutment Placement Aid
Manual Screwdriver (Medium) 0.9 mm
Manual Screwdriver (Medium) 1.2 mm
Manual Implant Driver - Contra-Angle
Torque Wrench
Depth Probe
Titanium Tweezers
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Surgical Kit Surgical Kit
124 125
KIT FEATURES:
Compact Surgical Kit
:: Autoclavable polymer case.
Articles
Note: Items that compose Neodent Kits are sold separately.
110.268
103.170
103.162
103.213
103.163
103.164
103.172
103.173
103.216
103.217
103.219
103.091
105.073
105.074
105.075
128.019
128.020
128.022
104.041
104.012
104.050
Compact Surgical Kit Case
Initial Drill
Twist Drill 2.0
Pilot Drill 2.0/3.0
Twist Drill 2.8
Twist Drill 3.0
Alvim Drill 3.5
Alvim Drill 4.3
CM Pilot Drill 2.8/3.5
CM Pilot Drill 3.0/3.75
CM Pilot Drill 3.6/4.3
Drill Extension
CM Implant Driver - Torque Wrench (Short)
CM Implant Driver - Torque Wrench (Long)
CM Implant Driver - Contra-Angle
Direction Indicator 2.8/3.5
Direction Indicator 3.0/3.75
Direction Indicator 3.6/4.3
Manual Screwdriver (Medium) 0.9
Manual Screwdriver (Medium) 1.2
Torque Wrench
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Compact Surgical Kit Compact Surgical Kit
126 127
KIT FEATURES:
Compact Surgical Kit for Conical Implants
:: Autoclavable polymer case.
Compact Surgical Kit for Conical Implants Compact Surgical Kit for Conical Implants
Articles
Note: Items that compose Neodent Kits are sold separately.
110.278
103.170
103.171
103.172
103.173
103.174
103.216
103.219
103.220
103.366
103.211
103.242
103.091
128.019
128.022
128.023
104.041
104.012
128.015
105.073
105.074
105.075
105.115
105.116
105.117
105.001
105.018
111.036
111.037
111.038
104.050
129.001
Compact Surgical Kit for Conical Implants
Initial Drill
Alvim Twist Drill 2.0
Alvim Drill 3.5
Alvim Drill 4.3
Alvim Drill 5.0
CM Pilot Drill 2.8/3.5
CM Pilot Drill 3.6/4.3
CM Pilot Drill 4.3/5.0
Countersink Drill 3.5
Countersink Drill 4.3
Countersink Drill SF 4.5/5.0
Drill Extension
Direction Indicator 2.8/3.5
Direction Indicator 3.6/4.3
Direction Indicator 4.3/5.0
Manual Screwdriver (Medium) 0.9
Manual Screwdriver (Medium) 1.2
CM Height Measurer
CM Implant Driver - Torque Wrench (Short)
CM Implant Driver - Torque Wrench (Long)
CM Implant Driver - Contra-Angle
Narrow Smart Implant Driver - Contra-Angle
Regular Smart Implant Driver - Contra-Angle
Wide Smart Implant Driver - Contra-Angle
Smart/WS Implant Driver - Torque Wrench (Short)
Hex Connection - Torque Wrench (Long)
Alvim Bone Tap 3.5
Alvim Bone Tap 4.3
Alvim Bone Tap 5.0
Torque Wrench
Titanium Tweezers
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
128 129
KIT FEATURES:
Facility Kit
:: Autoclavable polymer case.
Articles
Note: Items that compose Neodent Kitsare sold separately.
110.265
103.330
103.331
103.341
103.342
103.343
105.104
105.109
105.111
111.035
128.027
129.016
104.050
104.012
105.005
105.009
104.056
Facility Kit Case
Facility Initial Drill
Facility Twist Drill 2.0
Facility Drill 10
Facility Drill 12
Facility Drill 14
Contra-Angle Facility Connection
Long Facility Connection For Torque Wrench
Bone Tap Connection Facility For Torque Wrench
Facility Bone Tap
Facility Height Measurer
Facility X-Ray Positioner
Torque Wrench
Manual Screwdriver (Medium) 1.2
Hex Screwdriver Torque Connection 1.2
Prosthetic Abutment Driver
Facility Abutment Placement Aid
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Facility Kit Facility Kit
130 131
KIT FEATURES:
Zygomatic Kit
:: Autoclavable polymer case.
Articles
Note: Items that compose Neodent Kitsare sold separately.
110.264
104.042
105.067
103.190
103.191
103.192
103.193
103.197
103.208
124.004
129.011
129.012
104.012
104.041
Zygomatic Surgical Kit Case
Zygomatic Installation Driver
Zygomatic Connection - Contra-Angle
Spherical Drill for Zygomatic 2.9 mm
Twist Drill for Zygomatic 2.7 mm
Pilot Twist Drill for Zygomatic 2.7/3.3 mm
Twist Drill for Zygomatic 3.3 mm
CM Countersink Drill for Zygomatic
Pilot Twist Drill for Zygomatic 3.3/3.7 mm
Zygomatic Labial Protector
Zygomatic Bicortical Probe
Zygomatic Probe
Manual Screwdriver (Medium) 1.2 mm
Manual Screwdriver (Medium) 0.9 mm
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Zygomatic Kit Zygomatic Kit
132 133
KIT FEATURES:
Prosthetic Kit
:: Autoclavable polymer case.
Articles
Note: Items that compose Neodent Kits are sold separately.
110.267
105.065
105.041
105.005
105.006
105.007
105.008
105.009
105.044
105.071
128.015
128.027
104.005
104.016
104.050
Prosthetic Kit Case
Hex Screwdriver Torque Connection 0.9
Hex Screwdriver Torque Connection (Short) 1.2
Hex Screwdriver Torque Connection 1.2
Hex Screwdriver Torque Connection 1.6
Slot Screwdriver Torque Connection
Square Screwdriver Torque Connection
Prosthetic Abutment Driver
Prosthetic Abutment Driver (Short)
Torque Connection (Long) 1.2
CM Height Measurer
Facility Height Measurer
Manual Screwdriver Torque
Impression Coping Driver - Closed-Tray
Torque Wrench
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Prosthetic Kit Prosthetic Kit
134 135
KIT FEATURES:
CM Try In Kit
:: Autoclavable polymer case;:: Suitable for better planning of Morse Taper prosthetic components.
Articles
Note: Items that compose Neodent Kitsare sold separately
110.266
114.191
114.192
114.193
114.194
114.195
114.196
114.197
114.198
114.199
114.200
114.201
114.202
114.203
114.204
114.205
114.206
114.207
114.208
114.209
114.210
114.211
114.212
114.213
114.214
114.215
114.216
114.217
114.218
114.219
114.220
114.221
114.222
114.223
114.224
114.230
114.231
114.232
114.233
104.012
114.226
114.227
114.228
114.335
114.336
114.337
114.450
114.451
114.452
CM Try-In Kit Case
CM Abutment Try-In 3.3X4x0.8
CM Abutment Try-In 3.3X4x1.5
CM Abutment Try-In 3.3X4x2.5
CM Abutment Try-In 3.3X4x3.5
CM Abutment Try-In 3.3X4x4.5
CM Abutment Try-In 3.3X4x5.5
CM Abutment Try-In 3.3X4x6.5
CM Abutment Try-In 3.3X6x0.8
CM Abutment Try-In 3.3X6x1.5
CM Abutment Try-In 3.3X6x2.5
CM Abutment Try-In 3.3X6x3.5
CM Abutment Try-In 3.3X6x4.5
CM Abutment Try-In 3.3X6x5.5
CM Abutment Try-In 3.3X6x6.5
CM Abutment Try-In 4.5X4x0.8
CM Abutment Try-In 4.5X4x1.5
CM Abutment Try-In 4.5X4x2.5
CM Abutment Try-In 4.5X4x3.5
CM Abutment Try-In 4.5X4x4.5
CM Abutment Try-In 4.5X4x5.5
CM Abutment Try-In 4.5X4x6.5
CM Abutment Try-In 4.5X6x0.8
CM Abutment Try-In 4.5X6x1.5
CM Abutment Try-In 4.5X6x2.5
CM Abutment Try-In 4.5X6x3.5
CM Abutment Try-In 4.5X6x4.5
CM Abutment Try-In 4.5X6x5.5
CM Abutment Try-In 4.5X6x6.5
CM Abutment Try-In 17° 3.3X6x1.5
CM Abutment Try-In 17° 3.3X6x2.5
CM Abutment Try-In 17° 3.3X6x3.5
CM Abutment Try-In 30° 3.3X6x1.5
CM Abutment Try-In 30° 3.3X6x2.5
CM Abutment Try-In 30° 3.3X6x3.5
WS Abutment Try-In 4.5X6x0.8
WS Abutment Try-In 4.5X6x1.5
WS Abutment Try-In 4.5X6x2.5
WS Abutment Try-In 4.5X6x3.5
Manual Screwdriver (Medium) 1.2
CM Anatomic Abutment Try-In 1.5
CM Anatomic Abutment Try-In 2.5
CM Anatomic Abutment Try-In 3.5
CM Lateral Anatomic Abutment Try-In 1.5
CM Lateral Anatomic Abutment Try-In 2.5
CM Lateral Anatomic Abutment Try-In 3.5
Facility Anatomic Abutment Try-In 1.5
Facility Anatomic Abutment Try-In 2.5
Facility Anatomic Abutment Try-In 3.5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
CM Try in Kit CM Try in Kit
136 137Neodent Instruments Neodent Instruments
NeodentInstruments
Ø 5.0Ø 4.3Ø 3.5Ø 2.0
Long 43 mm
Long 43 mm
Regular 35 mm
Short 31 mm
Regular 35 mm
Regular 35 mm
Short 31 mm
103.172103.171
103.232
103.120103.072
103.173
103.121
103.174
103.233 103.234 103.235
103.122
Alvim Drill
:: Available in surgical steel:: Instrument sequence for surgical
alveolus in Alvim/Drive Implants.
3.3/4
5.3/6
3.6/4.33/3.75
4.3/5.3
Initial
2.8/3.5
3.8/4.3
2/3
4.3/5
103.170
103.216
103.214
103.213
103.220
103.217
103.215
103.218
103.221
103.219
Initial Drill
Pilot/Countersink Drill
:: Available in surgical steel;:: Cortical rupture;:: 2.0mm diameter.
:: Available in surgical steel;:: Increasing the surgical alveolus diameter
row, easing the penetration of the next drill;
:: Replaces the Countersink when using Morse Taper Implants.
Twist Drill
:: Available in surgical steel;
:: Instrument sequence for surgical alveolus in Titamax Implants.
Ø 3.3 Ø 5.3Ø 3.0 Ø 4.3Ø 2.8Ø 2.0 Ø 3.8
103.164
103.230
103.168103.163103.162
103.229103.228
103.167 103.169103.166
103.223 103.226103.222 103.225 103.227103.224
103.231
138 139
Facility Abutment Placement Aid
Facility Connection
Facility Drill
Direction Indicator:: For driver 105.104 maximum torque 45 Ncm;:: For driver 105.109 maximum torque 45 Ncm.
:: Available in Titanium;:: Instrument to guide the implant’s position;:: Diameter of central band corresponds to CM
Implant diameter;:: Smaller side to be used after Ø2.0mm drill;:: Larger side to be used after the last drill before
implant Installation.
Neodent Instruments Neodent Instruments
12 mm 14 mm
3.6/4.3
4.3/5.0
4.3/5.0
5.3/6.0
Wrench
10 mm
3.3/4.0
WS
Contra-Angle
3.0/3.75
Facility Initial
TwistØ 2.0
2.8/3.5
104.056
105.104
103.331
128.020
103.330
128.019
105.109
103.341
128.021
103.342 103.343
128.022
128.024
128.023
128.025
105.075
CM Implant Driver - Contra-Angle
:: To place CM Implants with Contra-Angle, or attached to a manual Driver for Contra-Angle Connections (104.028) for hand placement;
:: With six dimples to indicate the hex index face position;:: The laser marks indicate the depth of implant placement, bone level, 1 and
2mm infra-bone and last marking (3mm) biological space;:: Maximum torque: 30N.Ncm.
LongShort
105.073 105.074
CM Implant Driver - Torque Wrench
:: For placement CM Implants with the Torque Wrench (104.050);:: With six marks to indicate the hex index face position;:: The laser marks indicate the depth of implant placement, bone level, 1 and
2mm infra-bone and last marking (3mm) biological space;:: Maximum torque: 60N.Ncm.
:: Available in surgical steel;:: Instrument sequence for surgical alveolusin Facility Implants.
:: Insertion of Facility prosthetic components through impact.
140 141Neodent Instruments Neodent Instruments
Height Measurer
Drill Extension
WS Implant Driver - Contra-Angle
WS Implant Driver - Torque Wrench
Facility Bone Tap
Facility Bone Tap Connection
Titanium Tweezers
:: Available in Titanium;:: For selection of CM prosthetic abutments;:: Marks corresponding to transmucosa heights.
:: Available in surgical steel;:: Screw for drill retaining;:: Screw attached to drill extension;:: To tighten or untighten the screw, a half-
turn on the 1.2 Digital Driver (104.012) is enough;
:: Maximum torque: 30N.Ncm.
:: Available in surgical steel;:: Adaptation of hex assemblies;:: To place implants using the motor and Contra-Angle;:: Maximum torque: 30N.cm.
:: Available in surgical steel;:: Adaptation of hex assemblies;:: Fit in square wrench;:: Maximum torque: 30N.Ncm.
:: Suitable for the formation of threads in surgical socket before placing Alvim implants in bone bed type I or II.
:: Suitable for the formation of threads in surgical socket before placing Facility implants in bone bed typeI or II.
:: Suitable for manual installation using Torque Wrench.
:: To handle implants;:: New Tweezer system that prevents
deviation in the active bit;:: Millimeter scale for checking during
procedures;:: Self-locking implant.
Facility
Long
Connection
CM
Short
Bone Tap
128.015
105.001
111.035
103.091
105.002
129.001
128.027
105.018
105.111
1.5
1.5
3.5
3.5
5.5
2.5
2.5
6.54.5
4.5
0.8
Alvim Bone tapØ 4.3 Ø 5.0Ø 3.5
111.036 111.037 111.038
Handle Implant Driver
:: Available in stainless steel; :: Manual implant placement.
104.047
142 143
Medium25 mm
Short20 mm
Short20 mm
Medium25 mm
Long38 mm
Long38 mm
129.004
104.036
104.028
104.041104.039
104.007 104.012
104.040
104.010
Depth Probe
Analog Handle
Manual Implant Driver - Contra-Angle
Manual Screwdriver 0.035/0.9 mm
Manual Screwdriver 0.048/1.2 mm
:: Available in Titanium;:: To probe preparations and analyze depth;:: Millimeter scale for checking during
procedures.
:: Used for tightening analogs and milling prosthetic Abutments.
:: Available in surgical steel;:: Compatible with all Neodent Implant Lines
Contra-Angle Drivers, it becomes a manual driver for implant placement.
:: Available in surgical steel;:: With diverging hex for better screw tightening
and transport.
:: Available in surgical steel;:: With diverging hex for better screw tightening
and transport.
Torque Wrench
:: Available in surgical steel;:: Extremely safe (lower than 5% variation);:: Fitting for square connections;:: Collapsible Wrench that allows for proper assembly
cleaning.
104.050
Operation Instructions
The Neodent Torque Wrench was designed to allow the necessary torque to be applied and simultaneous verification of that torque with the same Instrument.
The Neodent Torque Wrench comes with pre-calibrated torques: 10, 20, 32, 45 and 60 Ncm.
The Wrench function works in both directions, by simply pulling and turning the driver’s pin 180°. However, the torque measurements work only clockwise.
All that is needed is to apply force to the Wrench Handle (never the Wrench body) until the value marked on theLATERAL SCALE corresponds to the desired torque.
•WARNING: When inverting the torque direction, the gear may come loose from the driver bodyand fall. Therefore, this inversion should only be done with the driver connected to a part or outside the patient’s mouth.
Neodent Instruments Neodent Instruments
1
2
144 145Neodent Instruments
Screwdrivers
Neodent Instruments
:: Available in surgical steel;:: Please note the screwdriver that matches the screw in the
prosthetic Abutment;:: To control the torque, the screwdriver should be adapted to
a Torque Wrench (104.050);:: For manual torque, the screwdriver should be adapted to a
Manual Driver (104.005).
0.048/1.2Short
0.063/1.6Short 0.035/0.9
0.035/0.9Medium
0.035/1.6Medium
Slot Square
ProstheticAbutment
Driver (Short)
ProstheticAbutment
Driver0.063/1.60.048/1.2
0.048/1.2Medium
0.035/0.9Short
0.048/1.2Short
0.048/1.2Long Manual
105.041 105.008105.042 105.009105.065 104.005105.007105.044 105.071105.006105.005
104.016
Impression Coping Driver - Closed-Tray
Drivers for Contra Angle
Implant Removal
Trephine Bur
:: Available in surgical steel;:: Recommended for Conical Impression Coping
(used in closed tray techniques).
:: Available in surgical steel;:: Please note the screwdriver
that matches the screw in the prosthetic Abutment;
:: Available in surgical steel;:: 130.050 remove:- CM Ø 3.5, 3.75, 4.0, 4.3 and 5.0mm;- SMART Ø 3.5, 3.75, 4.0 and 4.3mm.:: 130.051 remove:- SMART Ø 5.0mm.:: 130.052 remove:- FACILITY.
:: Available in surgical steel;:: Collecting bone cylinder;:: Implant removal.
0.35 mm
Ø 5.0 Ø 10.0Ø 4.3 Ø 8.0Ø 4.1Ø 3.3
103.026103.051 103.087 103.028103.027 103.029
130.050 130.051 130.052
Bone Profile Drill for CM Implants
Tapered X-Ray Positioner Alvim / Drive
17°/30° 2.0 Drill Positioner
Facility X-Ray Positioner
7 And 9 mm Space Planning Instrument
:: Available in surgical steel;:: Used in the second surgical stage;:: Conforms the bone around the implant
platform, preparing an emergence profile compatible with the prosthetic Abutment’s profile.
:: Available in Titanium;:: Used to verify the depth of osteotomy without
opening flaps;:: We suggest using a periapical x-ray to evaluate.
:: Available in Titanium;:: Angles: 17° and 30°;:: To select and plan the angle of prosthetic abutments during
surgical procedures;:: Suggested use: After Twister Drill 2.0.
:: Available in surgical steel;:: Recommended for prosthetic/surgical
planning.:: 7 and 9 mm marks.
Ø 5.0Ø 4.3
17º
Ø 3.5
30º
129.009
128.018
129.013
128.017
129.016
128.026
129.014
16
11.513
10
8
14
12
10
105.066 105.010 105.118 105.119105.012
103.378
146 147
Concave Osteotome
Convex Osteotome
Osteotomes Kit Case
Surgical Hammer
:: Available in surgical steel;:: Concave active cutting bit for non-
traumatic lifting the floor of the maxillary sinus;
:: Used to prepare the surgical alveolus for Implant placement in the posterior maxillary region with low bone height;
:: Marks from 7 to 17mm.
:: Available in surgical steel;:: Convex active bit;:: Used when the bone width is insufficient,
demanding bone compression and expansion before placing the implant;
:: Marks from 7 to 17mm.
:: Available in polymer;:: Autoclavable;:: Osteotomes sold separately.
:: Available in surgical steel;:: Polymer active bit;:: Used in compactors and expanders;:: Weight: 130g.
Neodent Instruments Neodent Instruments
3.5 mm
3.5 mm
4.0 mm 4.5 mm3.0 mm
3.0 mm
2.5 mm
2.5 mm
1.8 mm
1.8 mm
110.155
110.161
110.154
110.160
110.156
110.162
110.157
110.163
126.001
127.023
110.262
110.158 110.15917 mm13 mm9 mm
15 mm11 mm7 mm
17 mm13 mm9 mm
15 mm11 mm7 mm
Sinus Lift Curette
Disposable Bone Scraper
:: Available in surgical steel;:: Used to displace the Sinusal
Membrane.
:: Used to remove autogenous bone;:: Single use;:: Supplied sterile.
1 3 4 5 7
126.008 126.009 126.011126.010 126.012
Guide Pin
103.092 103.093
Prosthetic Surgical Guide
:: Available in Titanium;:: Abutments to prepare the surgical guide;:: Prosthetic guide iner diameter 2 mm:: Heights 6 and 10 mm;:: Surgical Guide: package with 10 un. (5 un. of
10 mm and 5 un. of 6 mm);:: Surgical Guide Pin: package with 5 un.
148 149Neodent Instruments Neodent Instruments
Collector Sieve
107.003
124.001
124.003
129.008
107.008
Disposable Bone Collector
Surgical Labial Retractor
Columbia Retractor
Scapel Handle
:: Available in polymer;:: To collect autogenous bone;:: Single use;:: Adaptable to vacuum pump;:: Includes two disposable sieves;:: Use second tip for saliva suction (watch for
contamination).
:: Available in surgical steel;:: Rounded edges to
minimize surgical trauma.
:: Available in surgical steel;:: Rounded edges to minimize
surgical trauma.
:: Available in surgical steel;:: For standard scalpel blade use;:: Blade not included;
Blade and Bivers Handle
Complement Case
Bone Mill
:: Handle and blade in surgical steel;:: Non-traumatic extraction for implant
placement;:: Similar to a periotome;:: Blades supplied individually.
:: Available in autoclavable polymer;:: Used to organize drills and ancillary
connections.
:: Available in surgical Stainless steel;:: Increases in bone volume;:: Blade comes with 3-year warranty, oxidation free;:: Fitted with lever for easier use;:: Bone mill pesttle with slots to optmize bone block locking
during use;:: Please avoid the use of bone originated from tissue banks;:: Bone Mill Teflon Ring (127.013) can be acquired.
BladeHandle
129.002 129.005
110.233
127.011
Bovine bone block withvolume = 1.76 cm3
After particling, volumegain was about 7 times.
Magnified particles