ceramic product inspection sample report
TRANSCRIPT
-
7/30/2019 Ceramic Product Inspection Sample Report
1/14
TEL:+86-(0)591-28050797 Fax: +86-(0)591-83841281Email: [email protected] www.veriquality.net
Report No.:xxxxxxxx
This reflects our findings at the time and place in inspection. This inspection has been carried out to the best of our knowledge and ability and our responsibility is limited to
the exercise of reasonable one. This report does not relieve the sellers from their contractual obligations nor prejudice buy ers right for compensation for any apparent and/or
hidden defects not detected during our random inspection or occurring thereafter. This report does not evidence shipment.
Page 1 of 14
INSPECTION REPORT (PSI)
1. INSPECTION INFORMATION
Client: XXXXXXXX
Supplier: XXXXXXXX Factory: XXXXXXXX
P.O. No.: XXXXXXXX P.O. Quantity: XXXXXXXX
Product: Ceramic firepots Item No.: XXXXXXXX
Inspection Date: XXXXXXXX Location: XXXXXXXX
Inspector: XXXXXXXX Reviewed by: XXXXXXXX
2. REFERENCE PHOTO
Warehouse Product
3. INSPECTION STANDARD
Inspection Type: Final Randomly Inspection
Default Level: ISO2859 Standard, Single Sampling Plans, Level II (Normal) Fixed samples AQL,Critical = Not allowed, Major = 2.5 , Minor = 4.0
Defect Specify: Appointed by Client Veriquality Specification as description as below:
Critical Defect:A "Critical" defect is on one's judgment and experience indicates is likely to: (1) Result in hazardous or unsafe
use, operation, or maintenance of the product, or (2) Prevents the functioning of the product.Major Defect:A "Major" defect is one other than critical, which is likely to result in the failure or to reduce materially the usabilityof the unit of product for its intended purpose.
Minor Defect: A "Minor" defect is one that is not likely to reduce materially the usability of the unit of product for its intendedpurpose or is a departure from established standards having little bearing on the effective use or operation of the unit of p roduct.
4. INSPECTION RESULT
Category Result Comment
Quantity Conform Not Conform Pending Remark Point 1
Appearance / Functionality Conform Not Conform Pending Remark Point 5,6
Product Style and Color Conform Not Conform Pending Remark Point 2,3
Data measurement Conform Not Conform Pending Remark Point
-
7/30/2019 Ceramic Product Inspection Sample Report
2/14
-
7/30/2019 Ceramic Product Inspection Sample Report
3/14
TEL:+86-(0)591-28050797 Fax: +86-(0)591-83841281Email: [email protected] www.veriquality.net
Report No.:xxxxxxxx
This reflects our findings at the time and place in inspection. This inspection has been carried out to the best of our knowledge and ability and our responsibility is limited to
the exercise of reasonable one. This report does not relieve the sellers from their contractual obligations nor prejudice buy ers right for compensation for any apparent and/or
hidden defects not detected during our random inspection or occurring thereafter. This report does not evidence shipment.
Page 3 of 14
4For item 0610, the polyfoam of bottom support inside the gift box was found bigger than the bottom a bit more .The factory claimed that they will improve the mold .
-
7/30/2019 Ceramic Product Inspection Sample Report
4/14
-
7/30/2019 Ceramic Product Inspection Sample Report
5/14
TEL:+86-(0)591-28050797 Fax: +86-(0)591-83841281Email: [email protected] www.veriquality.net
Report No.:xxxxxxxx
This reflects our findings at the time and place in inspection. This inspection has been carried out to the best of our knowledge and ability and our responsibility is limited to
the exercise of reasonable one. This report does not relieve the sellers from their contractual obligations nor prejudice buy ers right for compensation for any apparent and/or
hidden defects not detected during our random inspection or occurring thereafter. This report does not evidence shipment.
Page 5 of 14
6. QUANTITY STATUS
Item No.ShipmentQuantity
Quantity Available Sampling Size From
Packed
Quantity
Not Packed
Quantity
Not Finished
Quantity
Packed
Quantity
Not Packed
QuantityPcs Ctn Pcs Ctn Pcs Pcs Pcs Ctn Pcs
06102300 700 - - 700 - 22 -
06101700 700 - - - 700 - 22 -
06202100 1700 - - - 1700 - 53 -
06203600 1700 - - - 1700 - 53 -
06203800 600 - - - 600 - 19 -
06203700 500 - - - 500 - 15 -
06501300 550 - - 550 - 16 -
Total 6450 6450 - 200INDIVIDUAL RESULT: Conform Not Conform Pending Refer to remark point 1
7. APPEARANCE / FUNCTIONALITY
Defects
Critical Major Minor
Sampling Plan: Single, Normal AQL Level: Not allowed 2.5 4.0
Inspection Level: Level II Defects Found: 0 23 13
Sample Size: 200 Max. Allowed: 0 10 14No. of Sampled Ctns: Result: Within Exceed
Defects Picture Defects Description Cr Ma Mi
Item: 06202100
Pin hole at surface- - 4
-
7/30/2019 Ceramic Product Inspection Sample Report
6/14
TEL:+86-(0)591-28050797 Fax: +86-(0)591-83841281Email: [email protected] www.veriquality.net
Report No.:xxxxxxxx
This reflects our findings at the time and place in inspection. This inspection has been carried out to the best of our knowledge and ability and our responsibility is limited to
the exercise of reasonable one. This report does not relieve the sellers from their contractual obligations nor prejudice buy ers right for compensation for any apparent and/or
hidden defects not detected during our random inspection or occurring thereafter. This report does not evidence shipment.
Page 6 of 14
Extra material stuck at bottom- - 1
Chipped mark at bottom- 1 -
Item:06403700
Big ceramic stuck at mouth edge- 1 -
Protruded point at surface- - 1
-
7/30/2019 Ceramic Product Inspection Sample Report
7/14
TEL:+86-(0)591-28050797 Fax: +86-(0)591-83841281Email: [email protected] www.veriquality.net
Report No.:xxxxxxxx
This reflects our findings at the time and place in inspection. This inspection has been carried out to the best of our knowledge and ability and our responsibility is limited to
the exercise of reasonable one. This report does not relieve the sellers from their contractual obligations nor prejudice buy ers right for compensation for any apparent and/or
hidden defects not detected during our random inspection or occurring thereafter. This report does not evidence shipment.
Page 7 of 14
Mold line obviously for small- - 2
Item 06102300
glaze crawling- 1 -
Chipped mark- 3 -
Slightly deformed at corner- - 1
Item 06101700
-
7/30/2019 Ceramic Product Inspection Sample Report
8/14
TEL:+86-(0)591-28050797 Fax: +86-(0)591-83841281Email: [email protected] www.veriquality.net
Report No.:xxxxxxxx
This reflects our findings at the time and place in inspection. This inspection has been carried out to the best of our knowledge and ability and our responsibility is limited to
the exercise of reasonable one. This report does not relieve the sellers from their contractual obligations nor prejudice buy ers right for compensation for any apparent and/or
hidden defects not detected during our random inspection or occurring thereafter. This report does not evidence shipment.
Page 8 of 14
Red color at beige surface- - 1
Pin hole at surface- - 1
Deformed body- 4 -
The lid and body with big variation in effect- 1 -
Item 06203800
-
7/30/2019 Ceramic Product Inspection Sample Report
9/14
TEL:+86-(0)591-28050797 Fax: +86-(0)591-83841281Email: [email protected] www.veriquality.net
Report No.:xxxxxxxx
This reflects our findings at the time and place in inspection. This inspection has been carried out to the best of our knowledge and ability and our responsibility is limited to
the exercise of reasonable one. This report does not relieve the sellers from their contractual obligations nor prejudice buy ers right for compensation for any apparent and/or
hidden defects not detected during our random inspection or occurring thereafter. This report does not evidence shipment.
Page 9 of 14
Pin hole at surface- - 1
Item 06501300
Too thick of painting- 7 -
Chipped mark at top edge- -1 -
Crack glazing- 2 -
-
7/30/2019 Ceramic Product Inspection Sample Report
10/14
TEL:+86-(0)591-28050797 Fax: +86-(0)591-83841281Email: [email protected] www.veriquality.net
Report No.:xxxxxxxx
This reflects our findings at the time and place in inspection. This inspection has been carried out to the best of our knowledge and ability and our responsibility is limited to
the exercise of reasonable one. This report does not relieve the sellers from their contractual obligations nor prejudice buy ers right for compensation for any apparent and/or
hidden defects not detected during our random inspection or occurring thereafter. This report does not evidence shipment.
Page 10 of 14
Crawling glazing- 2 -
Item 06203600
Pin hole at surface- - 1
Crack glazing
Total defects found: 0 23 13
Max. Allowed: 0 10 14
INDIVIDUAL RESULT: Conform Not Conform Pending Refer to remark point 5&6
-
7/30/2019 Ceramic Product Inspection Sample Report
11/14
TEL:+86-(0)591-28050797 Fax: +86-(0)591-83841281Email: [email protected] www.veriquality.net
Report No.:xxxxxxxx
This reflects our findings at the time and place in inspection. This inspection has been carried out to the best of our knowledge and ability and our responsibility is limited to
the exercise of reasonable one. This report does not relieve the sellers from their contractual obligations nor prejudice buy ers right for compensation for any apparent and/or
hidden defects not detected during our random inspection or occurring thereafter. This report does not evidence shipment.
Page 11 of 14
8. PRODUCT STYLE & COLOR
8.1 Check against P.O / Order Information:
Discrepancy was found. Please refer to Remark point
The inspected sample was complied with P.O /order information.
No P.O / Order were provided for comparison.
8.2 Check against Specification / Picture / Sample etc.
Discrepancy was found. Please refer to Remark point
The inspected sample was consisted with approval requirement.
No Specification / Picture / Sample were provided for comparison.
8.3 Check against Instruction Manual
Discrepancy was found. Please refer to Remark point 2
The inspection sample was adopted on instruction manual
Instruction manual was not included.
INDIVIDUAL RESULT: Conform Not Conform Pending, refer to remark 2 and 3.
9. DATA MEASUREMENT
- Burn test30minutes ( 4 Samples ) : Conform
- Stability check on flat surface ( 200 Samples ) : Conform
- Barcode Readability Check ( 3 Samples/
item
) : Conform
- Transportation Drop Test ( 4 Carton ) : Conform
- Dimension of gift box (L x W x H cm) ( 1 Carton ) : Per actual findingsCarton dimension ( 1 Carton ) : Per actual findings
Carton weight ( 1 Carton ) : Per actual findings
INDIVIDUAL RESULT: Conform Not Conform Pending
Style No.Color box dimension
Specification Actual
620 6.75x6.75x6.5
610 6.75x6.75x8
640 10.5x10.25x21.75
650 8.5x9x14.75
Style No.Carton Dimension Catron weight
Specification Actual Specification Actual
620 36x19x36cm 3.2kgs
610 35.5x19x44cm 4.88kgs
640 53x29x57cm 7.54kgs
650 44x25x45cm 5.34kgs
-
7/30/2019 Ceramic Product Inspection Sample Report
12/14
TEL:+86-(0)591-28050797 Fax: +86-(0)591-83841281Email: [email protected] www.veriquality.net
Report No.:xxxxxxxx
This reflects our findings at the time and place in inspection. This inspection has been carried out to the best of our knowledge and ability and our responsibility is limited to
the exercise of reasonable one. This report does not relieve the sellers from their contractual obligations nor prejudice buy ers right for compensation for any apparent and/or
hidden defects not detected during our random inspection or occurring thereafter. This report does not evidence shipment.
Page 12 of 14
10. PACKING METHOD
Style No. Unit protected by Master carton
Polybag Polyfoam Cardboard Number of units Staples Nylon straps
All items Yes No Yes No Yes No 4/2 Yes No Yes No
Yes No Yes No Yes No Yes No Yes No
Yes No Yes No Yes No Yes No Yes No
Yes No Yes No Yes No Yes No Yes No
Reference photo
Master carton Color box Unit packing Units
xxxxxxx xxxxxxxx xxxxxxxx
INDIVIDUAL RESULT: Conform Not Conform Pending ,refer to remark 4.
11. SHIPPING MARK
Main mark ( 2 Sides) Side mark ( 2 Sides)
xxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxx
- For other items please refer to photos.
INDIVIDUAL RESULT: Conform Not Conform Pending
-
7/30/2019 Ceramic Product Inspection Sample Report
13/14
TEL:+86-(0)591-28050797 Fax: +86-(0)591-83841281Email: [email protected] www.veriquality.net
Report No.:xxxxxxxx
This reflects our findings at the time and place in inspection. This inspection has been carried out to the best of our knowledge and ability and our responsibility is limited to
the exercise of reasonable one. This report does not relieve the sellers from their contractual obligations nor prejudice buy ers right for compensation for any apparent and/or
hidden defects not detected during our random inspection or occurring thereafter. This report does not evidence shipment.
Page 13 of 14
PHOTO ATTACHMENT
1 warehouse and production line
1 the finished glazing product 1 2 the finised glazing product 2
3 the finished glazing product 3 4 the finished glazing product 4
5 the finished glazing 6 6 the product finished heating
-
7/30/2019 Ceramic Product Inspection Sample Report
14/14
TEL:+86-(0)591-28050797 Fax: +86-(0)591-83841281Email: [email protected] www.veriquality.net
Report No.:xxxxxxxx
This reflects our findings at the time and place in inspection. This inspection has been carried out to the best of our knowledge and ability and our responsibility is limited to
the exercise of reasonable one. This report does not relieve the sellers from their contractual obligations nor prejudice buy ers right for compensation for any apparent and/or
hidden defects not detected during our random inspection or occurring thereafter. This report does not evidence shipment.
Page 14 of 14
19 the gift box 2
2 defect and remark
40 color variation 20 06202100 defect- pin hole at surface (mi.) 1
22 06202100 defect--extra material stuck at bottom
edge (mi.) 1
23 06202100 defect--pin hole at surface (mi.) 2