conference program outline

Conference Program

6th International Conference on

Advanced Concepts in Mechanical Engineering

June 12-13, 2014, Iaşi, Romania

Organized by:

FACULTY of MECHANICAL ENGINEERING

“GHEORGHE ASACHI” TECHNICAL UNIVERSITY OF IASI

Under the aegis of:

ROMANIAN MINISTRY OF EDUCATION

ROMANIAN ACADEMY OF TECHNICAL SCIENCES

CONFERENCE PROGRAM OUTLINE

Thursday, June 12, 2014

09:00 – 10:00 Participants registration 10:00 – 10:30 Welcome, Opening Addresses (Dean, Rector, Conference President) 10:30 – 12:00 Plenary Session

1. Recent Progresses in Contact Mechanics through the use of the Equivalent Inclusion Method of Eshelby Daniel NÉLIAS, Université de Lyon, CNRS, INSA-Lyon, FRANCE

2. Air Conditioning in a Hospital: Two Applications Walter BOSSCHAERTS, Royal Military Academy, BELGIUM

3. Thermo-Chemical Recuperation as an Efficient Way of Engine's Waste Heat Recovery Leonid TARTAKOVSKY, Technion – Israel Institute of Technology, ISRAEL

4. Misalignment Effects in Cylindrical Roller Bearings Marcelin BENCHEA, Alina IOVAN DRAGOMIR and Spiridon CREŢU “Gheorghe Asachi” Technical University of Iaşi, ROMANIA

12:00 – 14:00 Lunch Break 14:00 – 16:00 Sections Session Poster Session (Faculty of Mechanical Engineering Hallway) 16:00 – 16:30 Coffee Break 16:30 – 18:00 Sections Session 19:00 – 24:00 Conference Gala Dinner (Rossini Room at Palas Conference Center)

Friday, June 13, 2014

09:00 – 10:30 Sections Session (where required) 10:30 – 11:00 Coffee Break 11:00 – 12:30 Sections Session (where required) 12:30 – 12:45 Conference Closing Ceremony 12:45 – 14:30 Lunch * Company Visit to Delphi Diesel Systems Romania

1 group x 40 persons (enroll at Conference registration desk)

Group leaves from Faculty of Mechanical Engineering at 9:30, Friday, June 13, 2014

CONFERENCE CHAIRMAN

Cezar OPRIŞAN

Dean of the Faculty of Mechanical Engineering, “Gheorghe Asachi” Technical University of Iaşi, RO

HONORARY COMMITTEE

Honorary President

Spiridon CREŢU “Gheorghe Asachi” Technical University Iaşi, RO

Members

Paun ANTONESCU POLITEHNICA University Bucharest, RO Costica ATANASIU POLITEHNICA University Bucharest, RO

Yvan BAUDOIN Royal Academy Bruxelles, BE Adrian BEJAN Duke University, NC, USA Ioan BOSTAN Technical University Chişinău, MD Vasile BUMACOV Ministry of Agriculture and Food Industry, MD Daniel CONDURACHE “Gheorghe Asachi” Technical University Iaşi, RO Ioan CURTU “Transilvania” University Braşov, RO Michel FEIDT University of Nancy, FR Mihai GAFIŢANU “Gheorghe Asachi” Technical University Iaşi, RO Radu GAIGINSCHI “Gheorghe Asachi” Technical University Iaşi, RO Marcel GUTMAN Tehnion Israel Institute of Technology, IL David HUI University of New Orleans, LA, USA Sadik KAKAÇ TOBB University of Econ. and Tech. Ankara, TR Dorel LEON “Gheorghe Asachi” Technical University Iaşi, RO Peter LORENZ HTW des Saarlandes, DE Vasile NĂSTĂSESCU Military Technical Academy Bucharest, RO Daniel NELIAS INSA Lyon, FR Dan PERJU Politehnica University Timişoara, RO Stoian PETRESCU POLITEHNICA University Bucharest, RO Tudor PRISECARU POLITEHNICA University Bucharest, RO Gheorghe Al. RADU “Transilvania” University Braşov, RO James WELTY Oregon State University, OR, USA

SCIENTIFIC COMMITTEE

Nicuşor Amariei “Gheorghe Asachi” Technical University Iaşi, RO Virgil ATANASIU “Gheorghe Asachi” Technical University Iasi, RO Mihai AVRAM POLITEHNICA University Bucharest, RO Mugur Bălan Technical University Cluj-Napoca, RO Paul Bârsănescu “Gheorghe Asachi” Technical University Iaşi, RO Karsten BERNS Technical University of Kaiserslautern, DE Ana-Maria Bianchi Technical Univ of Civil Engineering Bucharest, RO Marin Bică University of Craiova, RO Florin BREABAN University d’Artois, FR Cornel BRIşAN Technical University Cluj-Napoca, RO Mugurel BURCIU “Dunărea de Jos” University Galaţi, RO Nicolae BURNETE Technical University Cluj-Napoca, RO

Walter CALLES HTW des Saarlandes, DE Constantin CIOCANEL Northern Arizona University, USA Adrian CLENCI University of Piteşti, RO Ovidiu CREŢU WSDOT, Olympia, WA, USA Spiridon CREŢU “Gheorghe Asachi” Technical University Iaşi, RO Geert De CUBBER Royal Military Academy of Brussels, BE Alexandru DOBROVICESCU POLITEHNICA University Bucharest, RO Valeriu DOLGA Technical University Timişoara, RO Ioan DOROFTEI “Gheorghe Asachi” Technical University Iaşi, RO Radu DROSESCU “Gheorghe Asachi” Technical University Iaşi, RO Valeriu DULGHERU Technical University Chişinău, MD Gheorghe DUMITRAŞCU “Gheorghe Asachi” Technical University Iaşi, RO Mark ERICKSON Northampton Community College, PA, USA Cătălin FETECĂU “Dunărea de Jos” University Galaţi, RO Nicolae FILIP Technical University Cluj-Napoca, RO Pedro Silva GIRAO Superior Technical Institute Lisboa, PT Romeo GLOVNEA University of Sussex, UK Ştefan GRIGORAŞ “Gheorghe Asachi” Technical University Iaşi, RO Bogdan HORBANIUC “Gheorghe Asachi” Technical University Iaşi, RO Luc HOUPERT Timken Europe, Colmar, FR Angel HUMINIC “Transilvania” University Braşov, RO Vincenzo IANNOTTI University of Naples "Federico II", IT Ioana IONEL Politehnica University Timişoara, RO Romeo IONESCU “Ştefan cel Mare” University, Suceava, RO Nicolae ISPAS “Transilvania” University Braşov, RO Florian IVAN University of Piteşti, RO Dirk LEFEBER Vrije Universiteit Brussel, BE James LIBURDY Oregon State University, OR, USA Erwin LOVASZ Politehnica University Timişoara, RO Jose MACHADO University of Minho, Guimaraes, PT Vistrian MĂTIEŞ Technical University Cluj-Napoca, RO Grigore MARIAN State Agrarian University, MD Fabio MIANI University of Udine, IT Florentina MOCANU “Gheorghe Asachi” Technical University Iaşi, RO Nicolas MOUSSIOPOULOS International Hellenic University, GR Corneliu MUNTEANU “Gheorghe Asachi” Technical University Iaşi, RO Valentin NEDEFF “Vasile Alecsandri” University Bacău, RO Dumitru NEDELCU “Gheorghe Asachi” Technical University Iaşi, RO Vincenzo NIGRELLI University of Palermo, IT Dumitru OLARU “Gheorghe Asachi” Technical University Iaşi, RO Cezar OPRIŞAN “Gheorghe Asachi” Technical University Iaşi, RO Constantin PANĂ POLITEHNICA University Bucharest, RO Konstantinos PAPAKOSTAS Aristotle University of Thessaloniki, GR Mircea PASCOVICI POLITEHNICA University Bucharest, RO Doina PISLA Technical University Cluj-Napoca, RO Dumitru POP Technical University Cluj-Napoca, RO Viorel POPA “Dunărea de Jos” University Galaţi, RO Aristotel POPESCU “Gheorghe Asachi” Technical University Iaşi, RO Gheorghe POPESCU POLITEHNICA University Bucharest, RO Edward RAKOŞI “Gheorghe Asachi” Technical University Iaşi, RO Dik SCHIPPER University of Twente, NL Filipe SILVA University of Minho, Guimaraes, PT Jan SJOLIN Baltic International Academy, Riga, LV Domnica Mariana STANCIU “Transilvania” University Braşov, RO Daniela TARNITA University of Craiova, RO Leonid TARTAKOVSKY Tehnion Israel Institute of Technology, IL George TSILINGIRIDIS Aristotle University of Thessaloniki, GR Andrei TUDOR POLITEHNICA University Bucharest, RO Kristina UZUNEANU “Dunărea de Jos” University Galaţi, RO Ion VISA “Transilvania” University Braşov, RO Christos VLACHOKOSTAS Aristotle University of Thessaloniki, GR Gheorghe VOICU POLITEHNICA University Bucharest, RO

Session ACME_01_1 Machine Elements and Tribology

Thursday, 12 June,2014

Chairmen: Prof. Daniel NELIAS and Prof. Spiridon CREŢU

Nr. Title of the papers and authors Hours Room

1. Non Hertzian Contact Model for Tooth Contact Analysis of Spur Gear with Lead Crowning POP Nicolae, CRETU Spiridon and TUFESCU Ana

14.00 -14.15

M3

2. Mechanical characteristics of electronic printed circuit obtained by the vapour phase soldering process DUMITRU Georgiana Ionela, TUDOR Andrei, CHIŞIU Georgiana and PLOTOG Ioan

14.15 – 14.30

3. Wear Prediction in Wheel-Rail Contact under Partial Slip Conditions GAVRILĂ George, CREŢU Spiridon and, BENCHEA Marcelin

14.30 – 14.45

4. The Influence of the Misalignment on Load Distribution in Angular Contact Ball Bearings DAMIAN Ioan, PALEU Viorel and CRETU Spiridon

14.45 – 15.00

5. Considerations Concerning the Causes and Effects of the Occurrence of Residual Stresses in Metallic Materials: A Review Pavel Iurea and Constantin Carausu

15.00 – 15.15

6. Friction Torque Measurement in Partial Hybrid S-C Angular Contact Ball Bearings PALEU Viorel, DAMIAN Ioan and STIRBU Cristel

15.15 – 15.30

7. Friction in Bearings of Parallel Axes Transmissions TODI-EFTIMIE Alina, VELICU Radu, BRANDS Christoph, SCHLEREGE Frank and LATES Mihai-Tiberiu

15,30 - 15,45

COFFEE BREAK : 15.45 – 16.15


Thursday, 12 June 2014

Chairmen: Prof. Andrei TUDOR and Prof. Dumitru OLARU


1. Experimental Rig for Measuring Lubricant Film Thickness in Rolling Bearings ZHANG Xingnan, JABLONKA Karolina and GLOVNEA Romeo

16.15 – 16.30

M3

2. Influence of the Geometry on the Rolling Friction Torque in Lubricated Ball-Race Contacts BĂLAN D. Mihaela Rodica, STAMATE Vasile Ciprian, HOUPERT Luc, TUFESCU Ana and OLARU N. Dumitru

16.30 – 16.45

3. Influence of the Contact Pressure on the Rolling Resistance Moments in Dry Ball- Race Contacts DUMITRAŞCU Alina Corina, IANUŞ Gelu, and OLARU N. Dumitru

16.45 – 17.00

4. About the friction of the wiper windscreen contact MUSCA Ilie, MUSCA Gavril and VULTUR Dumitru-Cristian and Bogdan- UNGUREAN Vasile

17.00 – 17.15

5. The Influence of Substrate on the Mechanical and Tribological Characteristics of MEMS Materials for Space Applications MERIE Violeta , PUSTAN Marius , BÎRLEANU Corina and NEGREA Gavril

17.15 – 17.30

6. Rolling Bearings Greases Deterioration. Structure, Chemical Composition, Rheology, Service Life Correlations FARCAS Flavian and TIRON Mihail Catalin

17.30 – 17.45

7. Tribological Study of Ecological Lubricants Containing Titanium Dioxide Nanoparticles Filip ILIE, Cristina COVALIU and Georgiana CHISIU

17.45 – 18.00


Friday, 13 June 2014

Chairmen: Prof. Lorena DELEANU and Prof. Andrei TUDOR


1. Influence of Several Parameters on Simulating the Ballistic Impact on a Homogenous Plate PÎRVU Cătălin, BADEA Simona and DELEANU Lorena

9.00 – 9.15

M3

2. A Comparing Tribological Study of PBT and PBT with Aramid Fibers, for Block-on-Ring Dry Regime BOTAN Mihail, GEORGESCU Constantin and DELEANU Lorena

9.15 – 9.30

3. Researches Concerning Friction Influence on Material Cold-Hardening in High Precision Stamping BUTNAR Lucian-Adrian and SUGAR Ioan Radu

9.30 –9.45

4. Surface Generation by Material Removal in Manufacturing Processes from Machine Building SLĂTINEANU Laurenţiu, COTEAŢĂ Margareta, BEŞLIU Irina and DODUN Oana and RADOVANOVIC Miroslav

9.45 – 10.00

5. Wear model of sliding motion flat surfaces used in mechanical engineering PETRE Ivona

10.00 –10.15

COFFEE BREAK : 10.15 – 10.45



Chairmen: Prof. Lorena DELEANU and Prof. Vasile PUIU


1. Dependence Between the Favourable Initial (Residual) Stresses and Durability of the Ball Screws PUIU Vasile

10.45 –11.00

M3

2. Jacq Effect Influence on Thermomechanical Contact Fatigue TUDOSE – SANDU – VILLE Florin

11.00 –11.15

3. Geometrico-static modeling and simulation of the contact between chain and guide of a reference transmission PAPUC Radu, VELICU Radu, LATES Mihai-Tiberiu and JALIU Codruta

11.15 –11.30

4. About an Experimental Modeling of Steel Surfaces Wear in Injection of Plastic Composites with Short Glass Fibres RUS Dorin, CAPITANU Lucian and FLORESCU Virgil

11.30 –11.45

5. Technical Applications of the Descriptive Geometry and the Numerical Methods PETRE Ivona Camelia, POHOAŢĂ Alin, POPA Carmen and CÎRSTOIU Carmen Adriana

11.45 –12.00

Session ACME_01_5 Science of Materials


Chairmen: Prof. Cornel MUNTEANU and Prof. Andrei GABRIEL


1. Constitutive Parameters of Mechanical Behaviour Law for Poly (Ether-Ether-Ketone) Based Composites with Carbon Nanotubes and Carbon Fibres TRUFASU Dan-Catalin, BESNEA Aida Maria, ANDREI Gabriel, BASTIUREA Marian and COTET Adrian

14.00 -14.15

012

2. Evaluation of Mechanical Properties of Polyester Composite with Graphene and Graphite through Three-Point Bending Test Marian BASTIUREA, Magdalena Silvia RODEANU, Dumitru DIMA, Monica MURARESCU and Gabriel ANDREI

14,15 –14.30

3. Hybrid Particle/Fiber Polymer Based Composites Analysis Based on DMA Data vs. Material Property Predictions MOTOC Luca Dana

14.30 –14.45

4. Micro-alloying influence on hot work tool steel properties ADOROAEI Cristian George, AXINTE Mihai, CHICET Daniela-Lucia and STANCIU Sergiu

14.45 –15.00

5. Wear resistance and XRD analyses of CMoCuNiCrSiBO coatings obtained by thermal deposition on OLC45 substrate AVRAM Petru, IMBREA Marius Stelian, ISTRATE Bogdan, STRUGARU Sorin Iacob, CUCOS Iulian, AXINTE Catalina , and MUNTEANU Corneliu

15.00 –15.15

6. Wear resistance and XRD analyses of CNiCrSiBO coatings obtained by thermal deposition on OLC45 substrate AVRAM Petru, IMBREA Marius Stelian, ISTRATE Bogdan, STRUGARU Sorin Iacob, CUCOS Iulian, AXINTE Catalina, and MUNTEANU Corneliu

15.15 –15.30

7. White cast irons with acoustic properties Alexandru Ioan GÎRNEŢ, Daniela-Lucia CHICET, Mihai AXINTE, Sergiu STANCIU, Ion Hopulele

15.30 –15.45

COFFEE BREAK : 15.45 – 16.15



Chairmen: Prof. Vasile COJOCARU – FILIPIUC and Prof. Dumitru NEDELCU


1. A Comparative Study on the Corrosion Behaviour of NiCr and CoCr Dental Alloys in Saline Medium IACOBAN Sorin, BOLAT Georgiana, MUNTEANU Corneliu and MARECI Daniel

16.15 – 16.30

012

2. Comparative in vitro study on MgCa si MgCaSi alloys, as biodegradable implants Carmen Crimu, Corneliu Munteanu, Sergiu Stanciu, Bogdan Istrate, Kamel Earar

16.30 – 16.45

3. Corrosion behaviour of a cermet deposited coating in sulfuric acid solution Alexandru BARCA, Bogdan ISTRATE, Eduard Sebastian BÂRCĂ, Vasile Ionut CRISMARU and Corneliu MUNTEANU

16.45 – 17.00

4. Some Considerations Concerning the Differential Scanning Calorimetry of Ultra Tough Plastic Materials Dumitru NEDELCU, Nicoleta Monica LOHAN, Constantin CARAUSU and Octavian PRUTEANU

17.00 – 17.15

5. The advanced system for conducting the electric furnaces for heat treatments CUCOS Iulian, Corneliu MUNTEANU, Petru AVRAM

17.15 – 17.30

6. The Influence of Spraying Distance on the Chemical Composition of Arc Sprayed Layers GEORGESCU Iuliana – Silvia, URSACHE Silviu – Ionuţ, BACIU Elena –Raluca, HRIŢCU Daniel and BACIU Constantin

17.30 – 17.45

7. Influence of cooling rate on metallographic structure for gray iron, in the case of modification with a mechanical mixture of aluminum and FeSiCaMg Daniela – Lucia CHICET, Corneliu MUNTEANU, Vasile COJOCARU – FILIPIUC

17.45 – 18.00



Chairmen: Prof. Cornel MUNTEANU and Prof. Constantin BACIU


1. Silicon influence on the cast iron structure Daniela – Lucia CHICET, Vasile COJOCARU – FILIPIUC

9.00 – 9.15

012

2. A study on plastic deformations due to contact fatigue wear on a cermet coating deposited by thermal spraying methods Alexandru BARCA, Eduard Sebastian BÂRCĂ, Bogdan ISTRATE, Vasile Ionut CRISMARU and Corneliu MUNTEANU

9.15 – 9.30

3. Experimental Determination of the Yield Stress for Copper, Cu_99.75 CAZAC Alin Marian, GHEORGHIU Diana Antonia, BACIU Constantin, TOMA Stefan Lucian, BUJOREANU Carmen and BEJINARIU Costica

9.30 –9.45

4. Influence of the degree of cold drawing over the wear test and XRD analysis of pipes used for dampers Bogdan ISTRATE , Corneliu MUNTEANU , Petru SIMION, Vasile DIA, Petru AVRAM, Carmen Iulia CRIMU and Earar KAMEL

9.45 – 10.00

5. Experimental studies for reducing flux consumptions in atmospheric controlled brazing of aluminum alloys COCIAN Grigore and POPA Cătălin

10.00 – 10.15

Session ACME_02_1 Mechatronics

Thursday, 12 June

Chairmen: Prof. Vistrian MATIEŞ and Prof. Arjana DAVIDESCU


1. Considerations about the Role and Efficiency of the Transceiver's Heat Sink during Critical Situations DAVIDESCU Arjana, SAVII G. George, MATEAS Marius and STICLARU Carmen

14.00-14.15

S103

2. Control Characteristics of Haptic Exoskeleton Elbow Module Used in Space Robotised Applications MATEAŞ Marius Cornel, LOVASZ Erwin-Chr., MĂRGINEANU Dan Teodor, CIUPE Valentin, Mărgineanu Eugenia Zena, Maniu Inocenţiu and Diaconu Aurel

14.15-14.30

3. Experimental Determinations and Comparative Studies of the Stiffness for Some Sandwich Bars Reinforced with Metal Fabric MIRIŢOIU Cosmin Mihai, STĂNESCU Marius Marinel, BOLCU Dumitru , STANIMIR Alexandru and Manea Ion

14.30-14.45

4. Experimental Determinations of the Eigenmodes for Sandwich Bars with Different Core Reinforced with Metal Fabric MIRIŢOIU Cosmin Mihai, BOLCU Dumitru, STĂNESCU Marius Marinel and ROŞCA Vîlcu

14.45-15.00

5. Low Cost Device For Experimental Tests Of Electrorheological Fluids Chetran Beniamin and Mândru Dan

15.00-15.15

6. Positioning Systems Actuated by Corrugated Tube Elements JISA Vasile Sergiu, CHETRAN Beniamin Vasile and MANDRU Dan

15.15-15.30

7. Rapid Control Prototyping in the Development of Home Energy Management Systems LAPUSAN Ciprian, BALAN Radu, HANCU Olimpiu and RAD Ciprian

15.30-15.45

COFFEE BREAK : 15.45 – 16.15


Thursday, 12 June

Chairmen: Prof. Vistrian MATIES and Prof. Gheorghe PRISĂCARU


1. Parameter Identification and Modeling of a Pneumatic Proportional Valve with Applicability in Control Design of Servo-Pneumatic Systems RAD Ciprian-Radu, HANCU Olimpiu, MĂTIEŞ Vistrian and LĂPUŞAN Ciprian

16.15-16.30

S103

2. Vibration-based Crack Detection in L-Frames NTAKPE Jean Louis, GILLICH Gilbert-Rainer, MUNTEAN Florian, PRAISACH Zeno-Iosif and LORENZ Peter

16.30-16.45

3. Evaluation of Loss of Mass due to Corrosion using Vibration-based Methods GILLICH Gilbert-Rainer, PRAISACH Zeno-Iosif, FURDUI Horea, NTAKPE Jean Louis and MINDA Andrea Amalia

16.45-17.00

4. Innovative Bidimensional Absolute Transducer Based on Video Detection for Positioning into Micro Assembly Processes ARDELEANU Mihăiţă, IONIŢĂ Marius, IVAN Alexandru and GURGU Valentin

17.15-17.30

5. Finishing System Based on Ultrasonic Computerized Processes for Textiles Applied In Dentistry Florin Pantilimonescu, Lucian Constantin Hanganu, Mihaita Peptanariu, Stefan Grigoras, Irina Ionescu, Georgeta Lidia Potop, Alina Iovan-Dragomir and Stela Carmen Hanganu

17.30-17.45

6. FEM Simulation on Uniaxial Tension of Hyperelastic Elastomers CÂRLESCU Vlad, PRISĂCARU Gheorghe and OLARU Dumitru

17.45-18.00


Friday, 13 June

Chairmen: Prof. Dan MANDRU and Prof. Cristel ŞTIRBU


1. 3D analysis for identification of the proper type of post to restore the endodontic treated teeth MĂRGĂRIT Ruxandra, SOROHAN Ştefan TĂNĂSESCU Alice, DĂGUCI Constantin and ANDREI Oana Cella

9.00-9.15

S103

2. Optimization Design for Car Suspension Elastic Elements BUJOREANU Carmen and ŞTIRBU Cristel

9.15-9.30

3. Study on the Defects Size of Ball Bearings Elements Using Vibration Analysis BUJOREANU Carmen, MONORANU Răzvan and OLARU Dumitru

9.30-9.45

4. 3D CAD, CAM and Rapid Prototyping Applied for Cam Fabrication BESNEA Danie, IONASCU Georgeta, AVRAM Mihai1,BOGATU Lucian and SPANU Alina

9.45-10.00

5. Hardware Structures for High Precision Pneutronic Systems AVRAM Mihai, CONSTANTIN Victor, BUCSAN Constantin, BESNEA Daniel and SPANU Alina

10.00-10.15

6. Improving the Image Accuracy for Grasping SPANU Alina, AVRAM Mihai and BESNEA Daniel

10.15-10.30

7. Proportional Hydraulic Flow Control Valves with Simple and Differential Command AVRAM Mihai, BUCŞAN Constantin, DUMINICĂ Despina and POPESCU-CUŢĂ Alina

10.30-10.45

8. Modal Analysis of a MEMS Cantilever POPESCU-CUTA Alina, IONASCU Georgeta, DONTU Octavian, AVRAM Mihai, COMEAGA Constantin-Daniel and MANEA Elena

10.45-11.00

COFFEE BREAK : 11.00 – 11.30


Friday, 13 June

Chairmen: Prof. Mihai AVRAM and Prof. Carmen BUJOREANU


1.

Gripper System for Handing the Book on the Library Shelf Out SPANU Alina, AVRAM Mihai and BUCSAN Constantin

11.30-11.45

S103

2.

Analysis and Simulation of Gait Types with Blocked Joints BARITZ Mihaela, COTOROS Diana and BARBU Daniela

11.45-12.00

3.

Dynamic Behavior of MEMS Resonators PUSTAN Marius, BIRLEANU Corina, RUSU Florina and HARAGAS Simion

12.00-12.15

4.

Evaluation of comfort degree for pushing/pulling motions under the influence of controlled induced vibrations in the fingers-hand–arm assembly BARITZ Mihaela, COTOROS Diana and BALCU Ion

12.15-12.30

5.

Influence of non-linear properties of fluid viscoelastic properties on seismic damping properties of a ten stories building using ANSYS program IONESCU Adriana, NEGRU Mihai and BURADA Cristian

12.30-12.45

6.

Modeling of the Seated Human Body in a Vibrational Medium BARBU Daniela Mariana

12.45-13.00

7.

Optimal configuration of fluid viscoelastic seismic dampers on a ten stories building using Finite Elements Method IONESCU Adriana, NEGRU Mihai and BURADA Cristian

13.00-13.15

8.

Graphic Method Profiling of the End Mill Cutter Generating the Screw Compressor PO63 POPA Camelia Lǎcrǎmioara and POPA Viorel

13.15-13.30

Session ACME_02_5 Bioengineering

Thursday, 12 June

Chairmen: Prof. Jose Machado and Dr. TRUNFIO-SFARGHIU Ana-Maria


1. Conceptual Design of a Mechatronic System for Supporting Basic Quality of Life of Bedridden Elderly People SILVA Bruno, MACHADO José, CARVALHO Vitor,SOARES Filomena, MATOS Demétrio, PEREIRA Filipe and BEZERRA Karolina

14.00-14.15

S111

2. Modeling and Simulation of Physical Parameters of Human Respiratory System MEIRELES Catarina, MACHADO José and LEÃO Celina P

14.15-14.30

3. Fracture Resistance of Prosthetic Restored Teeth with Fiberglass Posts versus Metallic Posts MĂRGĂRIT Ruxandra, SANDU Marin, TĂNĂSESCU Alice, OPREA Raluca Manuela and ANDREI Oana Cella

14.30-14.45

4. Stress Study of Removable Partial Denture with Attachments Using Finite Element Analysis ANDREI Oana Cella, TĂNĂSESCU Livia Alice, MĂRGĂRIT Ruxandra and TIEREAN Mircea Horia

14.45-15.00

5. Role of Synovial Fluid Constituents on Tribological Behavior ofSynovial Joints. Application for Developing Novel Therapeutic Substitutes SAVA Mirela-Maria, SUFLET Dana Mihaela , BERTHIER Yves and TRUNFIO-SFARGHIU Ana-Maria

15.00-15.15

6. Interaction of Particles with the Pulmonary Interface Effects on Surface Elasticity MUNTEANU Bogdan, BERTHIER Yves, RIEU Jean-Paul and TRUNFIO-SFARGHIU Ana-Maria

15.15-15.30

7. Role of surface industrial finishing process of joint implant UHMWPE on their tribological behaviour POPA Mihaela, WANG Na, DESCARTES Sylvie and TRUNFIO-SFARGHIU Ana-Maria

15.30-15.45

COFFEE BREAK : 15.45 – 16.15

Session ACME_02_6 Bioinginerie

Thursday, 12 June

Chairmen: Prof. Jose Machado and Prof. Cezar Oprisan


1. Modeling and Design of Prosthetic Abutment System to Evaluate the Complex Interface Mariana ROTARIU, Florin MUNTEANU, Marius TURNEA and Dragos AROTARITEI

16.15-16.30

S111

2. Modeling and Simulation Keloid Scar Formation from Biphasic Contact Blunt-Prosthesis Marius TURNEA, Mariana ROTARIU, Dragos AROTARITEI and Ilea MIHAI

16.30-16.45

3. Performance Optimization of Blunt-Prosthesis-Rod complex with Tribological Considerations Robert FILEP, Dragos AROTARITEI, Marius TURNEA, Mihai ILEA and Mariana ROTARIU

16.45-17.00

4. New Design Concept for Reducing Torque Wear on Implant MIHAI Simona and FILIP Viviana

17.00-17.15

5. Prehension of the Small Cylindrical Objects by the Human Fingers. Friction and Adherence Processes BARNEA Alexandru, OPRISAN Cezar, and OLARU N. Dumitru

17.15-17.30

6. Some Aspects Concerning Modeling the Eye Plant without Ocular Deviations BARBU Daniela Mariana

17.30-17.45

7. Techniques, Methods and Instruments for Human Bone Virtual Reconstruction. Main Human Movements Simulations DUMITRU Violeta Cristina , POPA Dragos-Laurentiu, DUTA Alina and CIUNEL Stefanita

17.45-18.00

Session ACME_03_1 Mechanisms and Machine Theory


Chairmen: Prof. Cezar DUCA and Prof. Erwin-Christian LOVASZ


1. Singularities Classification for Structural Groups of Dyad Type DUCA Cezar and BUIUM Florentin

14.00-14.15

TMR-15

2. Transmission Indices Adoption for 6R Structural Group DUCA Cezar and BUIUM Florentin

14.15-14.30

3. Some Consideration Regarding the Models for Collisions with Plastic Indentation ALACI Stelian, CIORNEI Florina Carmen and FILOTE Constantin

14.30-14.45

4. On the Synthesis of a Five Bar Linkage for Linear Trajectory using a CAD Analysis MOLDOVAN Cristian Emil , STICLARU Carmen

14.45-15.00

5. Geometrical considerations regarding penalty throw and defense at handball game BUDESCU Emil, MERTICARU Eugen and Beatrice ABALASEI Aurelia

15.00-15.15

6. Consideration regarding the inverse kinematics of a rowing skiff under the action of the oars movement CHIRAZI Marin, BUDESCU Emil and MERTICARU Eugen

15.15-15.30

7. Kinematic model with three degrees of freedom related to direct throw in basketball game IACOB Radu, BUDESCU Emil and MERTICARU Eugen and OPRISAN Cezar

15.30-15.45

COFFEE BREAK : 15.45 – 16.15

Session 03_1 Mechanisms and Machine Theory


Chairmen: Prof. Ion VISA and Prof. Virgil ATANASIU


1. Structural Synthesis of Parallel Linkages by Multibody Systems Method VISA Ion, NEAGOE Mircea, MOLDOVAN Macedon and COMSIT Mihai

16.15-16.30

TMR-15

2. Low Speed Linear Actuator for Accurate Orientation of Concentrated Solar Convertors NEAGOE Mircea, SAULESCU Radu, MUNTEANU Olimpiu and BURDUHOS Bogdan

16.30-16.45

3. On a New Parallel Tracking System for Accurate Orientation of Concentrated Solar Convertors NEAGOE Mircea, VISA Ion, CRETESCU Nadia and MOLDOVAN Macedon

16.45-17.00

4. ZPA Worms – Definition and Technology POZDIRCA Alexandru

17.00-17.15

5. Virtual Model to Generate Motions on Cyclic Trajectories TĂTARU Mircea Bogdan, RUS Alexandru and BUNGĂU Constantin

17.15-17.30

6. Simulation of the Tooth Helix Angle Influence on the Vibration of a Single Stage Helical Gearbox KORKA Zoltan-Iosif, COJOCARU Vasile and MICLOSINA Calin-Octavian

17.30-17.45

7. Some Aspects Regarding the Mathematical Modeling and Dynamic Simulation of a Single Stage Helical Gearbox KORKA Zoltan Iosif, MICLOSINA Calin-Octavian and COJOCARU Vasile

17.45-18.00

Session ACME_03_1 Mechanisms and Machine Theory


Chairmen: Prof. Catalin ALEXANDRU and Prof. Cezar OPRISAN


1. Experimental measurement of flexion-extension in normal and osteoarthritic knee during sit-to-stand movement TARNITA Daniela, CALAFETEANU Dan, MATEI Irinel and TARNITA Dan

9.00-9.15

TMR-15

2. Stresses and Displacements for Virtual Models of Healthy and Osteoarthritic Knee Joint TARNITA Daniela, CATANA Marius and TARNITA Dan

9.15-9.30

3. Algorithms For Noncircular Gear Pitch Curves Generation CRISTESCU Bogdan, CRISTESCU Ana and ANDREI Laurenţia

9.30-9.45

4. The Influence of the Pinion-Shaft Deflection on the Dynamic Characteristics of Helical Gear Pairs ATANASIU Virgil, OPRIŞAN Cezar and LEOHCHI Dumitru

9.45-10.00

5. Contributions on the determination of the tools profiles for asymmetric gears manufacturing PLESU Gheorghe, CAZAN Stelian

10.00-10.15

6. Contribution on the optimization of the spur gears design process using software application PLESU Gheorghe, CAZAN Stelian

10.15-10.30

7. Biomechanical aspects of the lower limb positions to the direct free kick at football POPESCU Lucian and BUDESCU Emil

10.30-10.45

Session ACME_03_2 Robotics


Chairmen: Prof. Constantin OCNARESCU and Prof. Iosif CARABAS


1. Comparative Analysis of the Structures 4R and 3T Robots OCNĂRESCU Constantin, SIMIONESCU Ion

14.00-14.15

TMR-11

2. Augmented Reality Used for Robot Remote Control in Educational Laboratories PASC Ildiko, CSOKMAI Lehel, POPENTIU-VLADICESCU Florin and TARCA Radu

14.15-14.30

3. Image Processing and Artificial Neural Network for Robot Application POP Cristian, GRIGORESCU Sanda Margareta and LOVASZ Erwin-Christian

14.30-14.45

4. Virtual Planning of Robot Trajectories for Spray Painting Applications GÎRBACIA Teodora, GÎRBACIA Florin and MOGAN Gheorghe

14.45-15.00

5. Analysis of the Trajectory Shape Described by a Robotic Leg during a Walking Sequence POP Florina, DOLGA Valer and POP Cristian

15.00-15.15

6. A Workspace Characterization of the 3-RRR Planar Parallel Mechanism BUIUM Florentin, LEOHCHI Dumitru and DOROFTEI Ioan

15.15-15.30

7. Problems Regarding Singularities Analysis of a 3-RRR Parallel Mechanism BUIUM Florentin, DUCA Cezar and LEOHCHI Dumitru

15.30-15.45

COFFEE BREAK : 15.45 – 16.15



Chairmen: Dr. Geert DE CUBBER and Prof. Ioan DOROFTEI


1. Teodor: A Semi-Autonomous Search and Rescue and Demining Robot DE CUBBER Geert, BALTA Haris and LIETART Claude

16.15-16.30

TMR-11

2. Designing Search and Rescue Robots towards Realistic User Requirements DOROFTEI Daniela, MATOS Anibal and DE CUBBER Geert

16.30-16.45

3. Development of the Microrobot for Indoor Pipeline TĂTAR Mihai Olimpiu, MÂNDRU Dan, JIŞA Sergiu

16.45-17.00

4. Development of a Quality Indicator System for Haptic Exoskeleton Modules LOVASZ Erwin-Christian, MATEAŞ Marius, GRUESCU Corina-Mihaela, MĂRGINEANU Dan, CĂRĂBAŞ Iosif and STAN Sergiu-Dan

17.00-17.15

5. Planar Robot Grasping Planning Based on Symmetry DAVIDESCU Arjana and SAVII George

17.15-17.30

6. Optimal Design of the Control System for an Industrial Robot Using DOE Technique and Regression Model ENESCU Monica , ALEXANDRU Cătălin

17.30-17.45

7. Remote Controlled Wheeled Mobile Robot for Humanitarian Demining Purposes DOROFTEI Ioan, MALHERBE Romain, BRED Gaetan, BAUDOIN Yvan and CONDURARU Ionel

17.45-18.00



Chairmen: Prof. Mircea NEAGOE and Prof. Ionel STARETU


1. Method Used to Identify the Optimum Gripping Surfaces for an Injection-Molded Part TOCUT Pavel Dănut, TRIPE VIDICAN Călin, ȚARCĂ Ioan Constantin and BUNGĂU Constantin

9.00-9.15

TMR-11

2. New Solution for Telescopic Robotic Arm BOGDAN Laurean, TOMA Emanoil

9.15-9.30

3. The structure, work space and direct kinematic of the robots with 8 axes of type T normal R parallel (PM)(OM) STARETU Ionel

9.30-9.45

4. Validation of the Expert System Used for Optimum Gripping Surfaces Identification for an Injection-Molded Part TOCUT Pavel Dănuț, TRIPE VIDICAN Călin ȚARCĂ Ioan Constantin and BUNGĂU Constantin

9.45-10.00

5. Hexapod Locomotion of a Leg-Wleel Hybrid Mobile Robot CONDURARU Ionel, DOROFTEI Ioan, CONDURARU Alina and LUCA Dorin

10.00-10.15

6. Odometry Aspects of an Omnidirectional Mobile Robot with Modified Mecanum Wheels CONDURARU Ionel, DOROFTEI Ioan, LUCA Dorin and CONDURARU Alina

10.15-10.30

7. Structural Analysis of a New Ankle Rehabilitation Device RACU Cristina, DOROFTEI Ioan and CRIVOI Ovidiu

10.30-10.45

8. An Overview on Accuracy and Calibration Methods for Manipulators DOGARU Dan-Romulus and DOROFTEI Ioan

10.45-11.00

Session ACME_04_01 Mechanics of Deformable Bodies

Thursday, 12 June, 2014

Chairmen: Prof. Ioan CURTU and Prof. Paul BARSANESCU


1. Stress Analysis and Optimal Design of the Housing of a Two-Stage Gear Reducer COJOCARU Vasile, KORKA Zoltan-Iosif and MICLOSINA Calin-Octavian

14.00 -14.15

Faculty Council Room

2. Fatigue Analysis of Large Diameter Threaded Connections Subjected to Dynamic Axial Loads COJOCARU Vasile, MICLOSINA Calin-Octavian and KORKA Zoltan-Iosif

14.15 – 14.30

3. Mechanical Behavior of Guitar Neck under Simple Bending Stress Analyzed with Finite Elements Method STANCIU Mariana Domnica, CURTU Ioan and MOCANU Teodor

14.30 – 14.45

4. Design of Experimental Test Bench for Determining the Stresses and Strains State of Guitar Neck STANCIU Mariana Domnica, CURTU Ioan and MIHALACHE Daniel

14.45 – 15.00

5. Experimental Validation of a Finite Element Model of an Osteoporotic Human Femoral Bone Using Strain Gauge Measurement TAKACS Ioana Alexandra, DUDESCU Mircea Cristian, HĂRDĂU Mihail and BOTEAN Adrian Ioan

15.00 – 15.15

6. V-beam Thermal Actuator’s Performance Analysis Using Digital Image Correlation CHIOREAN Radu, DUDESCU Cristian, PUSTAN Marius and HĂRDĂU Mihail

15.15 – 15.30

7. The influence of the fatigue cycles number on material hardness GOANŢĂ Viorel

15.30 – 15.45

COFFEE BREAK : 15.45 – 16.15

Session ACME_04_02 Mechanics of Deformable Bodies


Chairmen: Prof. Ioan CURTU and Prof. Paul BARSANESCU


1. Experimental Analysis Regarding the Degree of Plastic Deformation of Fractured Surfaces under da/dN, KIc and JIc Determination GOANŢĂ Viorel

16.15 – 16.30

Faculty Council Room

2. Residual Stresses in Cylindrical Roller Bearings – a Three-Dimensional Analysis Model POPESCU Gabriel

16.30 – 16.45

3. An Analytical Solution for Three-Dimensional Elliptical Elastic-Plastic Rolling Contact POPESCU Gabriel

16.45 – 17.00

4. Assessment of Systems for Carrying Out of Planar Biaxial Tensile Test ANDRUSCA Liviu, DOROFTEI Ioan, BÂRSĂNESCU Paul Doru and GOANŢĂ Viorel

17.00 – 17.15

5. Optimizing the Shape and Size of Cruciform Specimens used for Biaxial Tensile Test ANDRUSCA Liviu, GOANŢĂ Viorel and BÂRSĂNESCU Paul Doru

17.15 – 17.30

Session ACME_05_1 Automotive and Thermal Combustion Engines. Transport Systems


Chairmen: Prof. Edwad RAKOSI and Prof. Nicolae ISPAS


1. Researches regard the use of bioethanol at the supercharged spark ignition engine OBEID Zuhair H. Obeid, PANA Constantin, NEGURESCU Niculae,CERNAT Alexandru

14.00 – 14.15

Propul-sion

Systems Lab

2. Theoretical and experimental researches regarding the use of butanol at diesel engine DOBRE Alexandru, PANĂ Constantin, NUȚU Nikolaos Cristian, NEGURESCU Niculae, CERNAT Alexandru

14.15 – 14.30

3. Vehicle Dynamics Study under Uncertainty George BIVOL, George ENE, Marian-Eduard RĂDULESCU, Mihai IACOB, Ion COPAE

14.30 – 14.45

4. Experimental and Theoretical Aspects of Fuelling a Diesel Engine With Liquefied Petroleum Gases NUTU Nikolaos Cristian, PANA Constantin, DOBRE Alexandru, NEGURESCU Niculae, CERNAT Alexandru

14.45 – 15.00

5. Researches on the behavior of the supporting structure of railway traction vehicles under the effect of shock dynamic forces SEBEŞAN Ioan, POPA Gabriel, SPIROIU Marius

15.00 – 15.15

6. Safety against derailment for railway vehicles POPA Gabriel , SEBEŞAN Ioan, SPIROIU Marius Adrian and BADEA Claudiu Nicolae

15.15 – 15.30

7. Experimental Study on the Influence of Certain Parameters over Vehicle’s Dynamic Behavior BIVOL George, ENE George, RĂDULESCU Marian-Eduard, IACOB Mihai, COPAE Ion

15.30 – 15.45

8 Simulating the Torque and Angular Speed Distri-bution within a Heavy Vehicle’s Planetary Gearbox ALEXA Octavian, ILIE Constantin Ovidiu, MARI-NESCU Marin, VÎNTURIS Valentin,TRUTĂ Marian

15.45 – 16.00

COFFEE BREAK : 16.00 – 16.15



Chairmen: Prof. Eugen GOLGOTIU and Prof. Tudor MITRAN


1. Study on the Dynamic Interaction between Agricultural Tractor and Trailer during Braking using Lagrange Equation NASTASOIU Mircea and ISPAS Nicolae

16.15 – 16.30

Propul-sion

Systems Lab

2. Experimental determination of the cinematic misfit within the transmission of a 4x4 vehicle that leads to self-generated torque along the vehicle’s inter-axle driveline TRUTĂ Marian, MARINESCU Marin, ALEXA Octavian, VILĂU Radu & VÎNTURIŞ Valentin

16.30 – 16.45

3. Predict air pollution in Brasov City with regression models TARULESCU Stelian, BELES Horia, SOICA Adrian , CHIOREANU Nicolae, MITRAN Tudor

16.45 – 17.00

4. An Theoretical Approach upon the Stiffness of Vehicle Resistance Structure Submitted to an Axial Impact SOICA Adrian, TARULESCU Stelian and ISPAS Nicolae

17.00 – 17.15

5. Analyzing the Static Behavior of a Bogie Frame by Comparing Two Methods of Simulations SEBESAN Ioan, ZAKARIA Yahia

17.15 – 17.30

6. Qualitative Estimation Criterion of Direct Injection Diesel Engines Performance Prediction for Stationary and Industrial Applications MĂRDĂRESCU Vladimir-Gheorghe, ISPAS Nicolae and NĂSTĂSOIU Mircea

17.30 – 17.45

7. Using Neural Networks to Modeling Vehicle Dynamics Octavian Alexa, Constantin-Ovidiu Ilie, Radu Vilău, Marin Marinescu, Marian Trută

17.45 – 18.00

8. Simulation of the Free Piston’s Movement from the Single Regime Running Thermo-Hydraulic Generator CHIORENU Nicolae , MITRAN Tudor, SARULESCU Stelian, BELES Horia and SOICA Adrian

18.00 – 18.15



Chairmen: Prof. Adrian SACHELARIE and Prof. Stelian SARULESCU


1. Thermo-Chemical Recuperation as an Efficient Way of Engine's Waste Heat Recovery TARTAKOVSKY Leonid, BAIBIKOV Vladimir, GUTMAN Marcel, PORAN Arnon and VEINBLAT Mark

9.00 – 9.15

Propul-sion

Systems Lab

2. Self-generated torque induced by the lockable and self-locking differentials within the 4WD drivetrain TRUTA Marian, MARINESCU Marin , VILAU Radu, ALEXA Octavian and ILIE Constantin-Ovidiu

9.15 – 9.30

3. COSRING-LUJET, Integrated New Concept in Automotive I.C. Engines for a Better Lubrication RAKOSI Edward, MANOLACHE Gheorghe, TALIF Sorinel Gicu and BALANESCU Dan Teodor

9.30 – 9.45

4. Aspects Of Modeling And Optimizing Air Circulation Currents In A Car Cabin CAUNII Vasile and SACHELARIE Adrian

9.45 – 10.00

5. Response Time to Sudden Changes in Speed and Load Regimes for Turbocharged Diesel Engine BURCIU Salvadore Mugurel and UZUNEANU Krisztina

10.00 –10.15

6. Theoretical and Experimental Analysis on Use of Alternative Fuels for Internal Combustion Engines UZUNEANU Krisztina, BURCIU Burciu

10.15 – 10.30

COFFEE BREAK : 10.30 – 10.45



Chairmen: Prof. Leonid TARTAKOWSKY and Prof. Eugen GOLGOTIU

Nr Title of the papers and authors Hours Room

1. Human Head-Neck System Behavior During Virtual Impact Automotive Simulations CIUNEL Stefanita, POPA Dragos-Laurentiu, GHERGHINA George, BOGDAN Mihaelad and TUTUNEA Dragos

10.45 – 11.00

Propul-sion

Systems Lab

2. Virtual High Speed Diesel Engine – a Simulated Experiment. Part I: Combustion Dynamics GAIGINSCHI Lidia, AGAPE Iulian, SACHELARIE Adrian and GIRBACI Mihai-Alin

11.00 – 11.15

3. Virtual High Speed Diesel Engine – a Simulated Experiment. Part II: The Influence of Polytropic Exponent Upon Combustion Product Formation GAIGINSCHI Lidia, AGAPE Iulian, SACHELARIE Adrian and GIRBACI Mihai-Alin

11.15 – 11.30

4. A New Electric Drive System For A Disc Brake System Used In The Vehicle, Experimental Stand Daniel BALTAGIU ,Radu GAIGINSCHI ,Radu DROSESCU and Ioan DAMIAN

11.30 – 11.45

5. Effects of temperature distribution on operational parameters of a spark ignition engine Mihai-Alin Gîrbaci , Iulian Agape and Lidia Gaiginschi

11.45 – 12.00

Session ACME_06_1 Applied Thermodynamics, Heat Transfer and Renewable Energy, Thermal Systems Engineering


Chairmen: Prof. Mugur Ciprian BĂLAN and Prof. Konstantinos PAPAKOSTAS


1. Ground Temperature Variation Around the Horizontal Collectors of a Heat Pump TODORAN Tudor Paul and BĂLAN Mugur Ciprian

14.00 – 14.15

Aristotel Renewable

Energy Laboratory

2. Study of Ground – Water Heat Pump Parameters During 3 Years of Operation TODORAN Tudor Paul and BĂLAN Mugur Ciprian

14.15 – 14.30

3. Hydrogen Production by Anaerobic Digestion of Biomass with High Lignocellulose Content - References Selection Procedure TELEKY Bernadette Emöke and BĂLAN Mugur Ciprian

14.30 – 14.45

4. Estimating Heating and Cooling Degree Days through an Urban Environment Using Publicly Available Sensors PAPAKOSTAS Konstantinos, MARTINOPOULOS Georgios and TSIMPOUKIS Alexandros

14.45 – 15.00

5. Experimental Investigation of Waste Heat Available for a Hybrid Micro-Cogeneration Group Involving a Diesel Engine Electric Generator and Organic Rankine Cycle PRISECARU Tudor, DOBROVICESCU Alexandru, PETCU Cristian, APOSTOL Valentin, PRISECARU Malina, POPESCU Gheorghe, POP Horatiu, CIOBANU Cristina, POP Elena, STANCIU Dorin, BADESCU Viorel, ALEXANDRU Ana, ABOALTABOOQ Mahdi Hatf Kadhum

15.00 – 15.15

6. Active Pulse Thermography Applied to Defect Detection in Bioceramic Materials DRAGAN Razvan Gabriel, ROSCA Ileana-Constanta, MONCHAU Francine, OLTEANU Ciprian, ZAMFIRA Sorin Constantin and BALTES Liana

15.15 – 15.30

7. Numerical Study of Corrugation Amplitude Influence of a Wavy Fin in Overall Performance of a Compact Heat Exchanger MARȚIAN Vlad, ALBEȚEL Septimiu, NAGI Mihai

15.30 – 15.45

COFFEE BREAK : 15.45 – 16.15



Chairmen: Prof. Bogdan HORBANIUC and Prof. Ema-Carmen PANAITE


1. Straight Section Influence on Thermal and Hydraulic Performances for a Wavy Air Fin in a Compact Heat Exchanger ALBEȚEL Septimiu, MARȚIAN Vlad, NAGI Mihai

16.15 – 16.30

Aristotel Renewable

Energy Laboratory

2. Study of Height Influence of Heat Exchanger Tanks on Overall Pressure Drop RUS Alexandru, MARŢIAN Vlad and NAGI Mihai

16.30 – 16.45

3. Improved Heat Transfer using Micro-structures in Trifold Solar Energy Conversion Systems POPESCU Aristotel, PFUND David, HERNANDEZ-GUERRERO Abel, PANAITE Ema-Carmen, LUPU Ana Georgiana and STADOLEANU Ovidiu-Virgil

16.45 – 17.00

4. Self-sustained, Independent Trifold Solar Energy Conversion System for Isolated Locations in Hot Climate Areas POPESCU Aristotel, PANAITE Ema-Carmen, LUPU Ana Georgiana, ATANASIU Marius, VLACHOKOSTAS Christos and MICHAILIDOU Alexandra

17.00 – 17.15

5. Finite Difference Approaches for One-Dimension Solid-Liquid Phase Change in Plane and Cylindrical Geometries HORBANIUC Bogdan, DUMITRAŞCU Gheorghe, FEIDT Michel and DUMENCU Andrei

17.15 – 17.30

6. Study of the Heat Transfer in a Heat Exchanger with Latent Heat Storage LUCA Constantin , DRAGOMIR-STANCIU Daniel , CRÎŞMARU Ionut and NAMAT Abdul Rahman Jarjes

17.30 – 17.45

7. Theoretical Analysis of the Entropy Flow Generated by the Fluid Flow with Friction and Heat Exchange VARTOMEI Haralambie – Mihail

17.45 – 18.00



Chairmen: Prof. Vlad-Mario HOMUTESCU and Prof. Dan BĂLĂNESCU


1. Gamma-Type Stirling Motor-Driven Compressor HOMUTESCU Vlad Mario, BĂLĂNESCU Dan-Teodor

9.00 – 9.15

Aristotel Renewable

Energy Laboratory

2. Physico-Mathematical Model of the Theoretical Gamma-Type Stirling Motor-Driven Compressor HOMUTESCU Vlad Mario, BĂLĂNESCU Dan-Teodor

9.15 – 9.30

3. A Study Regarding the Unsteady Heat Transfer and Phase Change COMAN Gelu, IOSIFESCU Cristian, DAMIAN Valeriu

9.30 –9.45

4. Analysis of the Efficiency of Ventilation Systems in Underground Garages CIOCAN Vasilica, VERDES Marina, POPOVICI George-Catalin, BURLACU Andrei, BALAN Marius-Costele and CAZACU Ionela

9.45 – 10.00

5. Experimental Determination of the Heat Recovery Boiler Effectiveness of a Gas Turbine Plant VERNICA Sorin-Gabriel, HAZI Aneta and HAZI Gheorghe

10.00 –10.15

COFFEE BREAK : 10.15 – 10.45



Chairmen: Prof. Aristotel POPESCU and Prof. Marius Vasile ATANASIU


1. Experimental Study for Data Validation Regarding the Flow Movement in Natural Convection in an Asymmetrical Heated Vertical Channel BURLACU Andrei, CIOCAN Vasilica, VERDES Marina, POPOVICI George-Catalin, BALAN Marius-Costel, TOFAN Bogdan-Andrei and PASTRAV Dragos

10.45 –11.00

Aristotel Renewable

Energy Laboratory

2. Integrated System for Producing, Transporting and Consuming the Unconventional Energy for a Residential Building POPOVICI George-Catalin, BALAN Marius-Costel, VERDES Marina, CIOCAN Vasilica, BURLACU Andrei and TOFAN Bogdan-Andrei

11.00 –11.15

3. Numerical study of the efficiency of flat plate solar collectors indifferent external conditions POPOVICI Catalin-George, HUDISTEANU Sebastian

11.15 –11.30

4. Numerical Study Regarding the Flow Movement in Natural Convection in an Asymmetrical Heated Vertical Channel BURLACU Andrei, VERDES Marina, CIOCAN Vasilica, POPOVICI George-Catalin, BALAN Marius-Costel, TOFAN Bogdan-Andrei, and PASTRAV Dragos

11.30 –11.45

5. Pressure Injection Influence on the Combustion Process SABAU Adrian

11.45 –12.00



Chairmen: Prof. Haralambie VARTOLOMEI and Prof. D.DRAGOMIR-STANCIU


1. Production of Electricity in Photovoltaic Systems for Administrative Buildings in Romania, Technical and Economic Analysis POPOVICI George-Catalin, BALAN Marius-Costel , VERDES Marina, CIOCAN Vasilica , BURLACU Andrei and TOFAN Bogdan-Andrei

14.00 -14.15

CASPCH Lab

2. Results of the Numerical Simulation of the Entropy Flow Generated at the Fluid Flow with Friction and Heat Exchange VARTOMEI Haralambie – Mihail

14.15 – 14.30

3. Soot and NOx Modeling SABAU Adrian

14.30 – 14.45

4. Combined Cycle Units – an Alternative to Reciprocating Engines in Terrestrial Propulsion Field. Estimation of Performances BALANESCU Dan-Teodor, HOMUTESCU Vlad-Mario, VASILIU Pavel-Doru and HRITCU Constantin-Eusebiu

14.45 – 15.00

5. Combined Cycle Units for Terrestrial Propulsion. Dimensional Approach BALANESCU Dan-Teodor1, HOMUTESCU Vlad-Mario, HRITCU Constantin-Eusebiu and TALIF Sorinel-Gicu

15.00 – 15.15

6. Study Regarding the Wind Action on the Functioning of Chimneys CIOCAN Vasilica, VERDES Marina, POPOVICI Catalin, BALAN Marius-Costel, BURLACU Andrei and VERDES Alexandru

15.15 – 15.30

7. The Analysis of the Temperature Influence on the Processing Precision in Centerless Grinding Machines CERNĂIANU Adrian

15.30 – 15.45

COFFEE BREAK : 15.45 – 16.15



Chairmen: Prof. Gheorghe DUMITRAŞCU and Prof. Mihai Marius PRODAN


1. Theoretical and experimental research regarding operating conditions of the refrigeration absorption /adsorption machines using solar energy CACIULA Bogdan, PANAIT Tanase, POPA Viorel

16.15 – 16.30

CASPCH Lab

2. Considerations on economic optimization of the relationship insulation - thermal energy sources insurance for civil building Adrian Serbanoiu , Gabriel Teodoriu , Bogdan Serbanoiu , Ion Serbanoiu , Marina Verdes and Marius-Costel Balan

16.30 – 16.45

3. Methodology for analysis of energy efficiency for residential buildings based on the optimal cost Adrian Serbanoiu , Gabriel Teodoriu , Bogdan Serbanoiu , Ion Serbanoiu, Marina Verdes and Marius-Costel Balan

16.45 – 17.00

4. Research on the Processes of Gas-Air Mixtures Formation BICĂ Marin, SOFRONIE Marius Sorin and CERNĂIANU Corina Dana

17.00 – 17.15

5. Solar stills integrated with an evacuated tube solar collector, analytical simulation and experimental validation TARAWNEH Muafag

17.15 – 17.30

6. Solid Fuels Behavior Revealed by Thermo-Gravimetric Analysis BICA Marin, SOFRONIE Marius Sorin and CERNAIANU Corina Dana

17.30 – 17.45

Session ACME_07_01 Technologies in Agriculture and Food Processing


Chairmen: Prof. Grigore MARIAN and Prof. Ioan BAISAN


1. Application of Energetic Crops for Obtaining Solid Biofuels for Conditions in Moldova MARIAN Grigore, MUNTEANU Alexandru, GUDIMA Andrei and PAVLENCO Andrei

14.00 -14.15

310

2. Losses Analysis of Materials Resulted From Shredding of Food Materials With Soft Texture by Means of Metal Wire Cutting OLARU Ciprian, NEDEFF Valentin, PANAINTE-LEHADUS Mirela and OLARU Ionel

14.15 – 14.30

3. RESEARCHES REGARDING THE IMPROVEMENT OF THE DESIGN FOR VINEYARD SPRAYING EQUIPMENT ŢENU Ioan, DIACONU Andreea, ROŞCA Radu, RITTNER Tibor

14.30 – 14.45

4. Researches Regarding the Reliability of the Spraying Nozzles Used for Vineyard and Orchard Sprayers ŢENU Ioan, RITTNER Tibor, ROŞCA Radu, COZMA Dănuţă

14.45 – 15.00

5. Studies and Research Concerning the Displacement of Solid Particle on an Oscillatory Flat Surface MOŞNEGUTU Emilian, NEDEFF Valentin, PANAINTE-LEHĂDUŞ Mirela, BONTAŞ Ovidiu, BARSAN Narcis, TOMOZEI Claudia and CHIŢIMUS Dana

15.00 – 15.15

6. Researches Concerning the Cutting of Strains Plant with Cutting Devices from Romanian Combine Harvesters NUTU Gelu and BĂISAN Ioan

15,15 - 15,30

7. Influence of Hydrothermal Treatment on Wheat for Milling COZMA Dănută, TENU Ioan and ZAPODEANU Cezar

15,30 - 15,45

Session ACME_08_01 Applied Mathematics


Chairman: Prof. Marian PANŢIRIUC


1. Generalization of Multispeed Gear Pitch Curves Design CRISTESCU Ana, CRISTESCU Bogdan and ANDREI Laurenţia

16.15 – 16.30

211

2. Mathematical Modeling of the Relationship between the Surface Roughness and the Tool-Chip Interface Temperature in Turning CÎRSTOIU Carmen Adriana, POPA Carmen and DESPA Veronica

16.30 – 16.45

3. Nonlinear Oscillations of a Mass with Cubic Stiffness, Harmonic Excitation and Dry Friction STĂNESCU Nicolae–Doru and POPA Dinel

16.45 – 17.00

4. Numerical Methods and Descriptive Geometry Methods for Unfoldings Determination CÎRSTOIU Carmen Adriana, POHOAŢĂ Alin, PETRE Ivona Camelia, POPA Carmen

17.00 – 17.15

5. The Generation of Conical Gears by a CAD Soft STĂNESCU Nicolae–Doru and POPA Dinel

17.15 – 17.30

Session ACME_09_01 Engineering Education


Chairmen: Prof. Jan SJOLIN and Prof. Tudor STANCIU


1. An Overview on Assistive Technology Training Courses for Salespersons CIOBANU Gabriela, HARJA Maria and CIOBANU Octavian

14.00 – 14.15

211

2. Modular Student Learning Kit for Internet of Things Florin PANTILIMONESCU, Lucian Constantin HANGANU, Mihaita PEPTANARIU, Stefan GRIGORAS, Irina IONESCU, Georgeta Lidia POTOP, Alina Iovan-DRAGOMIR, Stela Carmen HANGANU

14.15 – 14.30

3. New Applications for Mechatronic Platforms in Trans and Interdisciplinary Education CRISTEA Luciana, ZAMFIRA Sorin and LUCULESCU Marius

14.30 – 14.45

4. Cultural influence in engineering education, business and economics in terms of multinational approach SJOLIN Jan and STANCIU Tudor

14.45 – 15.00

5. An Overview on New Trends in Management Control Systems Design and Implementation Strategy CSAPO Jozsef Levente and BRISAN Cornel

15.00 – 15.15

6. Success Elements Analysis of International Projects STANCIU Tudor, SJOLIN Jan, DRAGOMIR Mihai, STANCIU Calin

15.15 – 15.30

ACME Poster Session

Thursday, 12 June


2_1. Naval Centrifugal Compressor Design using CAD solutions DUMITRACHE Constantin, CǍLIMǍNESCU Ioan and COMANDAR Corneliu

14.00 - 18.00

Dept. IMMR

1st Floor

2_2. Naval Standard Safety Valve Design using CAD solutions DUMITRACHE Constantin, CǍLIMǍNESCU Ioan and COMANDAR Corneliu

3_1. Wind Potential Analysis in Brasov Built Environment CIOBANU Daniela SAULESCU Radu JALIU Codruta and CLIMESCU Oliver

14.00 –18.00

Dept. IMMR

1st Floor

3_2. Chain Tracking System for Solar Thermal Collector CIOBANU Daniela, JALIU Codruța and SĂULESCU Radu

3_3. Method and Software for Analyzing the Assembly / Disassembly Operations of Mechanical Products IACOB Robert, POPESCU Diana

3_4. Augmented Reality Used for Robot Remote Control in Educational Laboratories PASC Ildiko, CSOKMAI Lehel, POPENTIU-VLADICESCU Florin and TARCA Radu

3_5. Dynamic Optimization of a Single-Seater Car Suspension System ŢOŢU Vlad, ALEXANDRU Cătălin

3_6 Planetary Gear for Counter-rotating Wind Turbines SAULESCU Radu JALIU Codruta, MUNTEANU Olimpiu and CLIMESCU Oliver

ORGANIZING COMMITTEE

Chairmen Ioan DOROFTEI [email protected] Aristotel POPESCU [email protected]

Section 1 Mihaela Rodica BĂLAN [email protected] Gelu IANUŞ [email protected]

Section 2 Gheorghe PRISĂCARU [email protected] Cristel ŞTIRBU [email protected]

Section 3 Dumitru LEOHCHI [email protected]

Section 4 Marian MAREŞ [email protected]

Section 5 Eugen GOLGOŢIU [email protected] Gabriel URSESCU [email protected]

Section 6 Vlad Mario HOMUTESCU [email protected] Marius ATANASIU [email protected]

Section 7 Ioan BĂISAN [email protected]

Section 8 Marian PANŢIRUC [email protected]

Section 9 Tudor STANCIU [email protected]

conference program outline

Documents