Construction Equipment Guide • Air Compressors, Generators & Light Towers Section • www.constructionequipmentguide.com • June 7, 2017 • Page 59

Time is running out. Don’t miss this opportunity to grab a Tier 3 Flex portable air compressor

before they’re gone. Tier 3 units are still available from 750 to 1800 cfm,

pressures up to 500 psi. In order to secure your Tier 3 Flex machine, orders

must be placed prior to September 1st. Order now before it’s too late...

All Tier 3 machines must be completed prior to December 31, 2017

LEARN MORE AT: www.Sullivan-Palatek.com / (219) 874.2497

THE

END IS NEARneed for replacements. The bulbs also require minimal fuel,which reduces CO2 emissions by 70 percent on each model.Atlas Copco’s HiLight H5+ is ideal for large construction

sites where workers are constantly on the move. The unitoffers low fuel consumption and each of its four LED lampsproject 350 watts of light for a 5,900-sq.-yd. illuminationarea. The H5+ is compact and easy to transport; contractorscan fit as many as 10 units on a 42-ft. trailer.The HiLight B5+ is recommended for applications includ-

ing music and sporting events, residential construction, roadconstruction, temporary public lighting and oil and gas.Demonstrating Atlas Copco’s latest LED technology, thelamps offer exceptional durability without any loss in luxlevels. The vertical hydraulic mast provides maximum safetyfor workers by illuminating an area as large as 5,900 sq. yds.The B5+ model features a compact box-unit design, whichmakes it ideal for mass transportation and easy installation.Consuming less than 0.25 gal. of fuel per hour, the B5+ canrun as long as 260 hours before needing to be refueled. Ideal for general construction and tough mining condi-

tions, the HiLight V5+ also can illuminate a 5,900-sq.-yd.area while saving as much as 60 percent in fuel compared tothe typical fuel consumption of a 6-kilowatt metal halidesolution. The LED lamps in the V5+ are designed for bothportability and performance. Heavy-duty floodlights benefitfrom high ingress protection (IP) and impact protection (IK)ratings. The HiLight V4 is a leading solution within the 4,000-watt

metal-halide light tower segment and can illuminate an areaof 4,700 sq. yds. What’s more, the HiLight V4 and V5+models boast the most compact footprint within the manualmast segment, enabling users to load as many as 20 units pertruck. The models also integrate a number of important fea-tures, including a spillage-free frame and the HardHat poly-ethylene canopy. The canopy withstands corrosion, dentsand fading, providing ongoing protection of the engine andoverall unit while keeping the resale value high. Unlike ABScanopies, the HardHat canopy will not crack on impact withdebris or other materials, according to the manufacturer. The HiLight V4’s metal halide sibling, the HiLight H4,

has a heavy-duty galvanized steel canopy, hydraulic mastand can illuminate an area of 4,700 sq. yds.Completing the expanded range, the new HiLight E2 and

E3+ are electric models with exceptional plug-and-lightcapabilities. Users simply connect to any power source,including auxiliary power, an electrical generator or directlyinto the grid, which helps deliver superior levels of energyefficiency. The E2 covers about 2,300 sq. yds. and the E3+, which

benefits from the latest LED technology, can illuminate a3,500-sq.-yd. area. The light towers can be used for a varietyof applications, including events, urban construction, roadconstruction and temporary public lighting.For more information, call 800/732-6762 or visit

www.atlascopco.us.(This story also can be found on Construction Equipment

Guide’s website at www.constructionequipmentguide.com.)

LED Light TowersMaximize PracticalLight Coverage

ATLAS from page 56