control systems
DESCRIPTION
Control Systems. Lect.8 Root Locus Techniques Basil Hamed. Chapter Learning Outcomes. After completing this chapter the student will be able to:. Root Locus – What is it?. W . R. Evans developed in 1948. - PowerPoint PPT PresentationTRANSCRIPT
Control SystemsLect.8 Root Locus TechniquesBasil Hamed
Chapter Learning OutcomesAfter completing this chapter the student will be able to:
Basil Hamed 2
Root Locus – What is it?• W. R. Evans developed in 1948.• Pole location characterizes the feedback system
stability and transient properties.• Consider a feedback system that has one parameter
(gain) K > 0 to be designed.
• Root locus graphically shows how poles of CL system varies as K varies from 0 to infinity.
Basil Hamed 3
L(s): open-loop TF
Root Locus – A Simple Example
Basil Hamed 4
Characteristic eq.
K = 0: s = 0,-2K = 1: s = -1, -1K > 1: complex numbers
Root Locus – A Complicated Example
Basil Hamed 5
Characteristic eq.
• It is hard to solve this analytically for each K.• Is there some way to sketch a rough root locus by
hand?
8. 1 Introduction• Root locus, a graphical presentation of the closed-loop poles as a
system parameter is varied, is a powerful method of analysis and design for stability and transient response(Evans, 1948; 1950).
• Feedback control systems are difficult to comprehend from a
qualitative point of view, and hence they rely heavily upon mathematics.
• The root locus covered in this chapter is a graphical technique that gives us the qualitative description of a control system's performance that we are looking for and also serves as a powerful quantitative tool that yields more information than the methods already discussed.
Basil Hamed 6
8.2 Defining the Root LocusThe root locus technique can be used to analyze and design the effect of loop gain upon the system's transient response and stability.
Basil Hamed 7
Assume the block diagram representation of a tracking system as shown, where the closed-loop poles of the system change location as the gain, K, is varied.
8.2 Defining the Root LocusThe T.F shows the variation of pole location for different values of gain k.
Basil Hamed 8
Pole location as a function of gain for the system
8.4 Sketching the Root Locus
Basil Hamed 9
1. Obtain the open-loop function kG(s)H(s) Characteristic Eq.: 1+kG(s)H(s)=0
2. Mark Poles with X and Zeros with O3. Draw the locus on the real axis to the left of an odd number of real
poles plus zeros.4. The R-L is Symmetrical with respect to the real axis.
8.4 Sketching the Root Locus5. The R-L originates on the poles of G(s)H(s) and terminates on the
zeros of G(s)H(s)6. Draw the asymptotes α = n – m α :numb of asymptotes, n: numb of zeros, m: numb of poles 1+kG(s)H(s) = 0, k =
7. The break away points will appear among the roots of polynomial obtained from: = 0 OR -D(s)
Basil Hamed 10
Example
Basil Hamed 11
Find R-L
ExampleSketch R-L
Basil Hamed 12
Solution:
Indicate the directionwith an arrowhead
ExampleIntersections of asymptotes =
Basil Hamed 13
Asymptotes(Not root locus)
Breakaway points are among roots of
s = -2.4656, -0.7672 ± 0.7925 j
Example
Basil Hamed 14
Breakaway point-2.46K=.4816
Root Locus – Matlab Command “rlocus.m”
Basil Hamed 15
Example
Basil Hamed 16
There are three finite poles, at s = 0, — 1, and - 2, and no finite zeros
Example
Basil Hamed 17
Example 8.2 P. 400PROBLEM: Sketch the root locus for the system shown in Figure
Basil Hamed 18
SOLUTION: Let us begin by calculating the asymptotes α = n – m =4-1=3 =±60,+ 180 Breakaway point= -D(s)==-.44
Example 8.2 P. 400
Basil Hamed 19
Root-locus diagrams that show the effects of adding poles to G(s) H(s)
Basil Hamed 20
a>0
b>a>0
Root-locus diagrams that show the effects of adding poles to G(s) H(s)
Basil Hamed 21
another pole is added to G(s)H(s) at s = -c
addition of a pair of complex conjugatepoles to the transfer function
Root-locus diagrams that show the effects of adding a zero to G(s)H(s)
Basil Hamed 22
ExampleGiven : find R-L when b=1,i) a=10, ii)a=9, iii)a=8 , iv) a=3, v) a=1Solution: i)a = 10. Breakaway points: s = -2.5 and -4.0.
Basil Hamed 23
Example
Basil Hamed 24
ii) a = 9. The breakaway point at s = -3.
iii) a = 8. No breakaway point on RL
Example
Basil Hamed 25
iv) a = 3.
v) a = b = 1. The pole at s = -a and the zero at -b cancel each other out, and the RL degenerate into a second-order case and lie entirely on the jw-axis.
ExampleConsider the closed loop system with open loo functionK a) sketch R-Lb)What range of k that ensures stability?Solution:
Basil Hamed 26
Example
Basil Hamed 27
Not valid
ExamplePart b) Charct Eq, 1+kGH=0 1+=0 Using R-H array
Basil Hamed 28
For stability needb= (-1/4)(k-10)>0 k<10
C= k-6 k> 6 6<k<10
Example
Basil Hamed 29
Find R-L and find k for critical stability
Solution
Breakaway points are among roots of
Example
Basil Hamed 30
ExampleCharacteristic equation
Basil Hamed 31
Routh array
When K = 30
Example
Basil Hamed 32