corrigendum #3 igl/nd/c&p/c14148 25.01.2017 subject: … · outgoing feeder cables) of igl...

INDRAPRASTHA GAS LTD CORRIGENDUM IGL/ND/C&P/C14148

of 28

CORRIGENDUM #3

IGL/ND/C&P/C14148 25.01.2017

SUBJECT: RATE CONTRACT FOR ELECTRICAL WORKS FOR INSTALLATION, TESTING,

COMMISSIONING OF 2400/1200/600 SCMH MOTORIZED COMPRESSOR

PACKAGES AND OTHER ELECTRICAL MODIFICATION WORK AT CNG

STATIONS & DTC DEPOTS IN NCT OF DELHI & NCR.

The subject tender no. IGL/ND/C&P/C14148 is modified to the following extent:

Clause 6 of IFB, Page 6 (Details of Bid Document):

The due date for submission of bid is extended up to 03.02.2017 at 1430 HRS from 27.01.2017

at 1430 HRS.

The details of service items in Schedule of Rates (SOR) is placed at Annexure-1

All other terms & condition of the subject tender documents remain unaltered.

Please submit this corrigendum # 3 duly sealed & signed along with your offer as a token of acceptance to the same.


of 28

Annexure -I

(DETAIL OF SERVICE ITEMS IN SOR) SERVICE TEXTS FOR ITEM 1 Supply and laying of 3.5C x 300 sq.mm copper conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables including lugs etc complete in all respects of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, Polycab and other reputed brands as mentioned in tender, conforming to IS 1554 in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. Work includes the supply of wires, termination, testing, commissioning and connection including all labour and materials as per the electrical industry standard specifications & specifications of this tender and directions of the engineer-in-charge. SERVICE TEXTS FOR ITEM 2 Supply and laying of 3.5C x 150 sq.mm Cu. conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. SERVICE TEXTS FOR ITEM 3 Supply and laying of 3.5C x 120 sq.mm Cu. conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab,conforming to IS 1554 in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. SERVICE TEXTS FOR ITEM 4 Supply and laying of 3.5C x 95 sq.mm Cu. conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. SERVICE TEXTS FOR ITEM 5 Supply and laying of 4C x 50 sq.mm Cu. conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. SERVICE TEXTS FOR ITEM 6 Supply and laying of 4C x 35 sq.mm Cu. conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. SERVICE TEXTS FOR ITEM 7


of 28

Supply and laying of 4C x 16 sq.mm Cu. conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. SERVICE TEXTS FOR ITEM 8 Supply and laying of 4C x 6 sq.mm Cu. conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. SERVICE TEXTS FOR ITEM 9 Supply and laying of 4C x 2.5 sq.mm Cu. conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, Rallison and Polycab, conforming to IS 1554 in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. SERVICE TEXTS FOR ITEM 10 Supply and laying of 3C x 1.5 sq.mm Cu. conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. SERVICE TEXTS FOR ITEM 11 Supply and laying of 7C x 1.5 sq.mm Cu. conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Grandly, Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. SERVICE TEXTS FOR ITEM 12 Supply and laying of 7C x 2.5 sq.mm Cu. conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. SERVICE TEXTS FOR ITEM 13 Providing, laying & fixing 300 mm2 aluminum with material. SERVICE TEXTS FOR ITEM 14 Supply and laying of 3.5C x 185 sq.mm Al. conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. SERVICE TEXTS FOR ITEM 15


of 28

Providing & fixing 19 X 1.5 mm2 cable. SERVICE TEXTS FOR ITEM 16 Providing & fixing 14 X 1.5 mm2 cable. SERVICE TEXTS FOR ITEM 17 Providing & fixing 26 X 0.75 mm2 shielded armoured cable. SERVICE TEXTS FOR ITEM 18 Supply and laying of Single core, 1.5 mm2 sized, Unsheathed, Flexible, Copper Conductor Wire / cable as per IS ? 694 Special Purpose, PVC Insulated, Low Tension Cables of make Finolex / Phonix / Polycab / Unistar or equivalent make subject to prior approval from IGL and including the supply of the required materials such as copper cable lugs for termination of the cable. SERVICE TEXTS FOR ITEM 19 Supply and laying of Single core, 2.5 mm2 sized, Unsheathed, Flexible, Copper Conductor Wire / cable as per IS ? 694 Special Purpose, PVC Insulated, Low Tension Cables of make Finolex / Phonix / Polycab / Unistar or equivalent make subject to prior approval from IGL and including the supply of the required materials such as copper cable lugs for termination of the cable. SERVICE TEXTS FOR ITEM 20 Dismantling including disconnection & deglanding of all the incoming / outgoing feeder cables of Switch boards / Power / Lighting Distribution Boards / Panels / UPS Power Distribution Boards / Panels / Change Over Switches with enclosures / Change Over Fuse Switch Units with enclosures / Fuse Switch Units with enclosures / UPS Power Systems with battery back up, etc. up to and including 500 Kg weight and transporting the same to IGL Ware House or to any CNG Station premises of IGL anywhere in Delhi. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 21 Dismantling including disconnection & deglanding of all the incoming / outgoing feeder cables of Switch boards / Power / Lighting Distribution Boards / Panels / UPS Power Distribution Boards / Panels / Change Over Switches with enclosures / Change Over Fuse Switch Units with enclosures / Fuse Switch Units with enclosures / UPS Power Systems with battery back up, etc. 501-1000 Kg weight and transporting the same to IGL Ware House or to any CNG Station premises of IGL anywhere in Delhi. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 22 Erection, Testing and Commissioning (excluding glanding and termination of all the incoming / outgoing feeder cables) of IGL Supplied Switch boards / Power / Lighting Distribution Boards / Panels / UPS Power Distribution Boards / Panels / Change Over Switches with enclosures / Change Over Fuse Switch Units with enclosures / Fuse Switch Units with enclosures / UPS Power Systems with battery back up, etc. of up to and including 500 Kg weight. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical


of 28

specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 23 Erection, Testing and Commissioning (excluding glanding and termination of all the incoming / outgoing feeder cables) of IGL Supplied Switch boards / Power / Lighting Distribution Boards / Panels / UPS Power Distribution Boards / Panels / Change Over Switches with enclosures / Change Over Fuse Switch Units with enclosures / Fuse Switch Units with enclosures / UPS Power Systems with battery back up, etc. of 501-1000 Kg weight. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 24 Laying (horizontally and vertically), testing and commissioning of 3.5C x 300 sq.mm Al. / Cu conductor cable PVC insulated, PVC sheathed, 100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. The job also includes transportation of the cables from IGL Warehouse or from any CNG Station of IGL in Delhi to the place of installation. The Contractor, shall, after completion of the cable laying job return the balance quantity of cables to IGL Warehouse, with the cables neatly coiled on the drums and sealed properly with PVC caps and tagged properly indicating balance length, size etc. The item rated for this job does not include cable glanding and termination, construction of trenches and supply & installation of cabling accessories . However, the job includes clamping & dressing of the cables including the supply of necessary G.I. Clamps. Megger Testing of cables including arranging the Megger before commissioning of the cables. The job shall be complete in all respects including the cost of tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL #s Engineer In Charge. SERVICE TEXTS FOR ITEM 25 Laying (horizontally and vertically), testing and commissioning of 3.5C x 185 sq.mm Al. / Cu conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. The job also includes transportation of the cables from IGL Warehouse or from any CNG Station of IGL in Delhi to the place of installation. The Contractor, shall, after completion of the cable laying job return the balance quantity of cables to IGL Warehouse, with the cables neatly coiled on the drums and sealed properly with PVC caps and tagged properly indicating balance length, size etc. The item rated for this job does not include cable glanding and termination, construction of trenches and supply & installation of cabling accessories . However, the job includes clamping & dressing of the cables including the supply of necessary G.I. Clamps. Megger Testing of cables including arranging the Megger before commissioning of the cables. The job shall be complete in all respects including the cost of tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge.


of 28

SERVICE TEXTS FOR ITEM 26 Laying (horizontally and vertically), testing and commissioning of 3.5C x 95 sq.mm Al. / Cu conductor cablePVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. The job also includes transportation of the cables from IGL Warehouse or from any CNG Station of IGL in Delhi to the place of installation. The Contractor, shall, after completion of the cable laying job return the balance quantity of cables to IGL Warehouse, with the cables neatly coiled on the drums and sealed properly with PVC caps and tagged properly indicating balance length, size etc. The item rated for this job does not include cable glanding and termination, construction of trenches and supply & installation of cabling accessories . However, the job includes clamping & dressing of the cables including the supply of necessary G.I. Clamps. Megger Testing of cables including arranging the Megger before commissioning of the cables. The job shall be complete in all respects including the cost of tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 27 Laying (horizontally and vertically), testing and commissioning of 4C x 50 sq.mm Al. / Cu conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. The job also includes transportation of the cables from IGL Warehouse or from any CNG Station of IGL in Delhi to the place of installation. The Contractor, shall, after completion of the cable laying job return the balance quantity of cables to IGL Warehouse, with the cables neatly coiled on the drums and sealed properly with PVC caps and tagged properly indicating balance length, size etc. The item rated for this job does not include cable glanding and termination, construction of trenches and supply & installation of cabling accessories . However, the job includes clamping & dressing of the cables including the supply of necessary G.I. Clamps. Megger Testing of cables including arranging the Megger before commissioning of the cables. The job shall be complete in all respects including the cost of tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 28 Laying (horizontally and vertically), testing and commissioning of 4C x 35 / 25 /16 sq.mm Al. / Cu conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in readymade trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. The job also includes transportation of the cables from IGL Warehouse or from any CNG Station of IGL in Delhi to the place of installation. The Contractor, shall, after completion of the cable laying job return the balance quantity of cables to IGL Warehouse, with the cables neatly coiled on the drums and sealed properly with PVC caps and tagged properly indicating balance length, size etc. The item rated for this job does not include cable glanding and termination, construction of trenches and supply & installation of cabling accessories . However, the job includes clamping & dressing of the cables including the supply of necessary G.I. Clamps. Megger Testing of cables including arranging the Megger before commissioning of the cables. The job shall be complete in all respects including the cost of tools, labour, etc. as per this


of 28

technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 29 Laying (horizontally and vertically), testing and commissioning of 4C x 10 / 6 / 4 sq.mm Cu. conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. The job also includes transportation of the cables from IGL Warehouse or from any CNG Station of IGL in Delhi to the place of installation. The Contractor, shall, after completion of the cable laying job return the balance quantity of cables to IGL Warehouse, with the cables neat coiled on the drums and sealed properly with PVC caps and tagged properly indicating balance length, size etc. The item rated for this job does not include cable glanding and termination, construction of trenches and supply & installation of cabling accessories . However, the job includes clamping & dressing of the cables including the supply of necessary G.I. Clamps. Megger Testing of cables including arranging the Megger before commissioning of the cables. The job shall be complete in all respects including the cost of tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 30 Laying (horizontally and vertically), testing and commissioning of 7C x 2.5 sq.mm Cu. conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. The job also includes transportation of the cables from IGL Warehouse or from any CNG Station of IGL in Delhi to the place of installation. The Contractor, shall, after completion of the cable laying job return the balance quantity of cables to IGL Warehouse, with the cables neatly coiled on the drums and sealed properly with PVC caps and tagged properly indicating balance length, size etc. The item rated for this job does not include cable glanding and termination, construction of trenches and supply & installation of cabling accessories . However, the job includes clamping & dressing of the cables including the supply of necessary G.I. Clamps. Megger Testing of cables including arranging the Megger before commissioning of the cables. The job shall be complete in all respects including the cost of tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 31 Laying (horizontally and vertically), testing and commissioning of 7C / 4C / 3C / 2C x 2.5 / 1.5 sq.mm Cu. conductor cable, PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. The job also includes transportation of the cables from IGL Warehouse or from any CNG Station of IGL in Delhi to the place of installation. The Contractor, shall, after completion of the cable laying job return the balance quantity of cables to IGL Warehouse, with the cables neatly coiled on the drums and sealed properly with PVC caps and tagged properly indicating balance length, size etc. The item rated for this job does not include cable glanding and termination,


of 28

construction of trenches and supply & installation of cabling accessories . However, the job includes clamping & dressing of the cables including the supply of necessary G.I. Clamps. Megger Testing of cables including arranging the Megger before commissioning of the cables. The job shall be complete in all respects including the cost of tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 32 Supply and Installation of Capacitor Banks of the ratings up to and including 150 KVAR and of Make L&T / ALSTOM / Asian / Madhav / Khatau Junker in the existing Capacitor Bank Panels. (Bidders to note that capacitor banks shall comprise individual capacitors of rating 5 KVAR each). SERVICE TEXTS FOR ITEM 33 Supplying and fixing of flame proof Double compression Cable glands for cable entries of sizes up to and including 1 Inch (ET) . The cable glands shall be of make Baliga/FCG/Ex-Protecta / CEAG Control gear / Sudhir Switchgear only and conforming to IS 2148. The cable glands shall be certified OK by Chief Controller of Explosives (CCOE), Nagpur / CMRI. SERVICE TEXTS FOR ITEM 34 Supplying and fixing of flame proof Double compression Cable glands for cable entries of sizes above 1 Inch (ET) upto and including 2 Inch (ET) . The cable glands shall be of make Baliga/FCG/Ex-Protecta / CEAG Control gear / Sudhir Switchgear only and conforming to IS 2148. The cable glands shall be certified OK by Chief Controller of Explosives (CCOE), Nagpur / CMRI. SERVICE TEXTS FOR ITEM 35 Supplying and fixing of flame proof Double compression cable glands for cable entries of any size above 2 Inch (ET) . The cable glands shall be of make Baliga/FCG/Ex-Protecta / CEAG Control gear / Sudhir Switchgear only and conforming to IS 2148. The cable glands shall be certified OK by Chief Controller of Explosives (CCOE), Nagpur / CMRI. SERVICE TEXTS FOR ITEM 36 Supplying and fixing weather proof, double compression Cable glands for cable entries of sizes up to and including 1 Inch (ET) and conforming to IS 2148. The cable glands shall be of make Comet / Baliga / FCG / Ex-Protecta / CEAG Control gear/ Sudhir Switchgear only. SERVICE TEXTS FOR ITEM 37 Supplying and fixing weather proof, double compression Cable glands for cable entries of sizes above 1 Inch (ET) upto and including 2 Inch (ET) and conforming to IS 2148. The cable glands shall be of make Comet / Baliga / FCG / Ex-Protecta / CEAG Control gear/ Sudhir Switchgear only. SERVICE TEXTS FOR ITEM 38 Supplying and fixing weather proof, double compression cable glands for cable entries of any size above 2 Inch (ET) and conforming to IS 2148. The cable glands shall be of make Comet / Baliga / FCG / Ex-Protecta / CEAG Control gear/ Sudhir Switchgear only. SERVICE TEXTS FOR ITEM 39 TERMINATION 3.5X300 SQMM armoured CU CABLE as per direction of Engineer-in-charge


of 28

SERVICE TEXTS FOR ITEM 40 Termination of PVC insulated, PVC sheathed, 1100V grade armoured , 3.5C x 240 sq.mm Al. conductor cable including cable glanding, including stripping of cable, crimping of lug and bolting to terminals etc. This includes supply of Dowell’s make heavy duty, long barrel, solderless, crimping type, tinned copper/Aluminium lugs (as per requirement & directions of IGL Engineer In Charge), and any other material such as crimping paste, etc. as required at Site for proper finish of cable termination. The item rate for this job does not include the cost of supply of cable glands. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 41 Termination of PVC insulated, PVC sheathed, 1100V grade armoured , 3.5C x 300 sq.mm Al. / Cu conductor cable including cable glanding, including stripping of cable, crimping of lug and bolting to terminals etc. This includes supply of Dowell#s make heavy duty, long barrel, solderless, crimping type, tinned copper/Aluminium lugs (as per requirement & directions of IGL Engineer In Charge), and any other material such as crimping paste, etc. as required at Site for proper finish of cable termination. The item rate for this job does not include the cost of supply of cable glands. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL #s Engineer In Charge. SERVICE TEXTS FOR ITEM 42 Termination of PVC insulated, PVC sheathed, 1100V grade armoured , 3.5C x 185 sq.mm Al. / Cu conductor cable including cable glanding, including stripping of cable, crimping of lug and bolting to terminals etc. This includes supply of Dowell’s make heavy duty, long barrel, solderless, crimping type, tinned copper/Aluminium lugs (as per requirement & directions of IGL Engineer In Charge), and any other material such as crimping paste, etc. as required at Site for proper finish of cable termination. The item rate for this job does not include the cost of supply of cable glands. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 43 Termination of PVC insulated, PVC sheathed, 1100V grade armoured , 3.5C x 150 sq.mm Al. / Cu conductor cable including cable glanding, including stripping of cable, crimping of lug and bolting to terminals etc. This includes supply of Dowell’s make heavy duty, long barrel, solderless, crimping type, tinned copper/Aluminium lugs (as per requirement & directions of IGL Engineer In Charge), and any other material such as crimping paste, etc. as required at Site for proper finish of cable termination. The item rate for this job does not include the cost of supply of cable glands. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 44 Termination of PVC insulated, PVC sheathed, 1100V grade armoured , C3.5C x 120 sq.mm Al. / Cu conductor cableincluding cable glanding, including stripping of cable, crimping of lug and bolting to terminals etc. This includes supply of Dowell’s make heavy duty, long barrel, solderless, crimping type, tinned copper/Aluminium lugs (as per requirement & directions of IGL Engineer In Charge), and any other material such as crimping paste, etc. as required at Site for proper finish of cable termination. The item rate for this job does not include the cost of supply


of 28

of cable glands. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 45 Termination of PVC insulated, PVC sheathed, 1100V grade armoured , 3.5C x 95 sq.mm Al. / Cu conductor cable including cable glanding, including stripping of cable, crimping of lug and bolting to terminals etc. This includes supply of Dowell’s make heavy duty, long barrel, solderless, crimping type, tinned copper/Aluminium lugs (as per requirement & directions of IGL Engineer In Charge), and any other material such as crimping paste, etc. as required at Site for proper finish of cable termination. The item rate for this job does not include the cost of supply of cable glands. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 46 Termination of PVC insulated, PVC sheathed, 1100V grade armoured , 3.5C x 70 sq.mm Al. / Cu conductor cable including cable glanding, including stripping of cable, crimping of lug and bolting to terminals etc. This includes supply of Dowell’s make heavy duty, long barrel, solderless, crimping type, tinned copper/Aluminium lugs (as per requirement & directions of IGL Engineer In Charge), and any other material such as crimping paste, etc. as required at Site for proper finish of cable termination. The item rate for this job does not include the cost of supply of cable glands. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 47 Termination of PVC insulated, PVC sheathed, 1100V grade armoured , 4C x 50 sq.mm Al. / Cu conductor cable including cable glanding, including stripping of cable, crimping of lug and bolting to terminals etc. This includes supply of Dowell’s make heavy duty, long barrel, solderless, crimping type, tinned copper/Aluminium lugs (as per requirement & directions of IGL Engineer In Charge), and any other material such as crimping paste, etc. as required at Site for proper finish of cable termination. The item rate for this job does not include the cost of supply of cable glands. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 48 Termination of PVC insulated, PVC sheathed, 1100V grade armoured , 4C x 35 / 25 /16 sq.mm Al. / Cu conductor cable including cable glanding, including stripping of cable, crimping of lug and bolting to terminals etc. This includes supply of Dowell’s make heavy duty, long barrel, solderless, crimping type, tinned copper/Aluminium lugs (as per requirement & directions of IGL Engineer In Charge), and any other material such as crimping paste, etc. as required at Site for proper finish of cable termination. The item rate for this job does not include the cost of supply of cable glands. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 49 Termination of PVC insulated, PVC sheathed, 1100V grade armoured , 4C x 10 / 6 / 4 sq.mm Cu. conductor cable including cable glanding, including stripping of cable, crimping of lug and


of 28

bolting to terminals etc. This includes supply of Dowell’s make heavy duty, long barrel, solderless, crimping type, tinned copper/Aluminium lugs (as per requirement & directions of IGL Engineer In Charge), and any other material such as crimping paste, etc. as required at Site for proper finish of cable termination. The item rate for this job does not include the cost of supply of cable glands. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 50 Termination of PVC insulated, PVC sheathed, 1100V grade armoured , 7C / 4C / 3C / 2C x 2.5 / 1.5 sq.mm Cu. conductor cable including cable glanding, including stripping of cable, crimping of lug and bolting to terminals etc. This includes supply of Dowell’s make heavy duty, long barrel, solderless, crimping type, tinned copper/Aluminium lugs (as per requirement & directions of IGL Engineer In Charge), and any other material such as crimping paste, etc. as required at Site for proper finish of cable termination. The item rate for this job does not include the cost of supply of cable glands. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 51 Supply, Installation and commissioning of 1400 mm sweep 240V, 50 Hz, ceiling fan of Crompton / Bajaj / Orient or any other make subject to prior approval of IGL including fan hook suspension rod 300 mm long connections, earthing, electronic dimmer type regulator, etc. complete. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 52 Supply, Installation and commissioning of Exhaust Fan of Crompton / Bajaj / Alstom / GEC or any other make subject to prior approval of IGL and of 9', 1400 RPM, suitable for use on 240V, 50 Hz, Single Phase with frame gravity drop louvers, clamps, etc. complete as required 300 sweep size. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL #s Engineer In Charge. SERVICE TEXTS FOR ITEM 53 Supply, Installation and commissioning of Exhaust Fan of Crompton / Bajaj / Alstom / GEC or any other make subject to prior approval of IGL and of 12', 1400 RPM, suitable for use on 240V, 50 Hz, Single Phase with frame gravity drop louvers, clamps, etc. complete as required 300 sweep size. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL #s Engineer In Charge. SERVICE TEXTS FOR ITEM 54 Supply, Installation and commissioning of Exhaust Fan of Crompton / Bajaj / Alstom / GEC or any other make subject to prior approval of IGL and of 18', 1400 RPM, suitable for use on 240V, 50 Hz, Single Phase with frame gravity drop louvers, clamps, etc. complete as required 300 sweep size. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL #s Engineer In Charge.


of 28

SERVICE TEXTS FOR ITEM 55 Providing and fixing 15A plug point and 5A Cum 15A, three pin plate socket outlet with 15A switch of MK / Schnider Make and earthing the third pin with 8 SWG Copper earth wire connections, etc. complete and carrying out wiring with 4 mm2 sized, Flexible, Single Core, PVC Insulated, 650V grade, copper conductor, wires in heavy duty ISI 20 mm PVC conduit pipe on existing tray / on walls / Floor complete. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 56 Supply, Installation, and Commissioning of 250 watt HPMV well glass Flameproof Light Fitting of Philips/ Wipro / Bajaj / Crompton / Osram make including providing and fixing tubes / lamps , chokes, starters, earthing connections and mounting arrangements, etc as required . The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL Site Engineer. SERVICE TEXTS FOR ITEM 57 Supply, Installation, and Commissioning of 250 W Metal Halide Floodlight Fixture of Philips/ Wipro / Bajaj / Crompton / Osram make including providing and fixing tubes / lamps , chokes, starters, earthing connections and mounting arrangements, etc as required . The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL Site Engineer. SERVICE TEXTS FOR ITEM 58 Fabrication, Supply / delivery & erection / installation at Site of Station Yard Lighting Pole as per attached Dwg # MEC/05/ELEC/P798/06 or Dwg #MEC /05/ELEC/P798/05 as per Site requirement. This item rate shall not include the cost of civil foundation require for the erection of the Pole. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 59 Disconnection and Dismantling of the existing Station Yard Lighting Pole and its transportation to IGL ware House or to any CNG Station of IGL anywhere in Delhi. Ladder, if required for the job, shall be arranged by the Contractor only.The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL Site Engineer. SERVICE TEXTS FOR ITEM 60 Supply, Installation, and Commissioning of 1 X 40W similar to Philips Light Fixture No. TMC 18/140 p of Philips/ Wipro / Bajaj / Crompton / Osram make including providing and fixing tubes / lamps , chokes, starters, earthing connections and mounting arrangements, etc as required . The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL Site Engineer.


of 28

SERVICE TEXTS FOR ITEM 61 Supply, Installation, and Commissioning of 2 X 40W similar to Philips Light Fixture No. TBS 50/236 HPF Mirror Optics (False Ceiling) of Philips/ Wipro / Bajaj / Crompton / Osram make including providing and fixing tubes / lamps , chokes, starters, earthing connections and mounting arrangements, etc as required . The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL Site Engineer. SERVICE TEXTS FOR ITEM 62 Supply, Installation, and Commissioning of 1200 mm X 40 Watts fluorescent tube light Fixture on building of Philips/ Wipro / Bajaj / Crompton / Osram make including providing and fixing tubes / lamps , chokes, starters, earthing connections and mounting arrangements, etc as required . The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL Site Engineer. SERVICE TEXTS FOR ITEM 63 Supply & Laying of G.I. Earthing Strip of the 25 mm X 3 mm, clamped to wall / structure including jointing (by welding only) and termination at the required points by welding only, including supply of all the required materials. The welded area shall be painted using Burger Make Lacoloid paint. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 64 Supply & Laying of G.I. Earthing Strip of the 40 mm X 5 mm, clamped to wall structure including jointing (by welding only) and termination at the required points by welding only, including supply of all the required materials. The welded area shall be painted using Burger Make Lacoloid paint. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 65 Supply & Laying of G.I. Earthing Strip of the 25 mm X 5 mm , clamped to wall / structure including jointing (by welding only) and termination at the required points by welding only, including supply of all the required materials. The welded area shall be painted using Burger Make Lacoloid paint. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 66 SUPPLY, BURRYING, CONNECTING AND TESTING OF TINNED COPPER PLATE ELECTRODE WITH NECESSARY ACCESSORIES AND PROVIDING HINGED COVER MANHOLE WITH LOCKING ARRANGEMENT. 20MM DIA GI WATERING PIPE WITH FUNNEL ETC. COMPLETE IN ALL RESPECTS. THE PLATE TO BE BURRIED WITH ITS TOP EDGE AT A DEPTH NOT LESS THAN 3500 MM FROM THE SURFACE OF THE GROUND AND AT LEAST 2000 MM AWAY FROM THE BUILDING FOUNDATION I/C PACKING OF CHARCOAL POWDER AND SALT AS PER IS-3043 TILL DATE. 600X600X6MM TINNED COPPER


of 28

SERVICE TEXTS FOR ITEM 67 Supply & Installation of Heavy Duty PVC Pipes of sizes up to and including 1 Inch for mechanical protection of the under ground cables. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 68 Supply & Installation of Heavy Duty PVC Pipes of sizes above 1Inch and upto and including 2 Inch for mechanical protection of the under ground cables. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 69 Supply & Installation of Flexible Conduit of size upto and including 1 Inch for mechanical protection of the under ground cables. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ?s Engineer In Charge. SERVICE TEXTS FOR ITEM 70 Supply and installation of G.I. Conduits of sizes up to and including 2 Inch for mechanical protection of the under ground cables rising from the trench / crossing the mechanical / process pipelines, etc . The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 71 Supply and installation of G.I. Conduits of sizes above 2 Inch and up to and including 4 Inch for mechanical protection of the under ground cables rising from the trench / crossing the mechanical / process pipelines, etc . The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 72 Supply and installation of G.I. Conduits PVC Pipes of sizes above 4 Inch and up to and including 6 Inch for mechanical protection of the under ground cables rising from the trench / crossing the mechanical / process pipelines, etc . The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 73 Design, Fabrication, Supply & Installation of Ladder Type, G.I. Cable Trays of width above 300 mm and up to & including 600 mm . The job includes supply & installation of cable tray accessories such as horizontal & vertical bends, elbows and structural steel supports / brackets for installation of the trays cable tray , etc. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge.


of 28

SERVICE TEXTS FOR ITEM 74 Design, Fabrication, Supply & Installation of Ladder Type, G.I. Cable trays of width up to and including 300 mm . The job includes supply & installation of cable tray accessories such as horizontal & vertical bends, elbows and structural steel supports / brackets for installation of the trays cable tray , etc. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 75 Supplying & fitting 250 Watt HPMV Lamp of approved make like Philips, Bajaj, Crompton, Oshram and any other* make (subject to prior approval of IGL) and suitable for operation on 1 Phase, 240V, 50 Hz, AC supply. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. Note: Item of any other make shall have 6 months free of cost replacement gaurantee. SERVICE TEXTS FOR ITEM 76 Supplying & fitting Choke for 250 Watt HPMV Lighting Fixture of approved make like Philips, Bajaj, Crompton, Oshram and any other* make (subject to prior approval of IGL) and suitable for operation on 1 Phase, 240V, 50 Hz, AC supply. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. Note: Item of any other make shall have 6 months free of cost replacement gaurantee. SERVICE TEXTS FOR ITEM 77 SUPL/LAYING-ELECTROMATS, Class 'C', thickness 3 mm, width 1000 mm confirming to IS: 15652/2006 SERVICE TEXTS FOR ITEM 78 Supply, Installation, testing and commissioning of wall mounted lighting DB, double door Construction, Constructed with 2 mm sheet steel enclosure along with a housing to mount the entire board. With required hardware, making connections including providing cable glands, lugs, earthing & painting etc. Arrangement for termination of cables/wires including three phase and neutral bus bars etc. complete in all respects. For Out Door Lighting) Incomer -1 No. 63 amps, fuse switch unit, outgoings connected through a 40 amps TP contractor and 24 hours dual/ multiple setting synchronous timer with battery backup, 63 A copper bus bars along-with auto/ manual selector switch and ON/OFF push buttons.Outgoings-3 Nos. 16/25/32/amps TPN MCBs, 03 No’s 16 amps SPN MCBs (through contractor") & 02 Nos. 16/25/32 amps TPN MCBs, 03 nos. 16 SPN MCBs (Direct without contractor) SERVICE TEXTS FOR ITEM 79 Supply, Installation, testing and commissioning of wall mounted lighting DB, double door Construction, Constructed with 2 mm sheet steel enclosure along with a housing to mount the entire board. With required hardware, making connections including providing cable glands, lugs, earthing & painting etc. Arrangement for termination of cables/wires including three phase and neutral bus bars etc. complete in all respects. For Indoor Lighting, Incomer- 63 amps, 4P, ELCB: outgoing: 6 amps SP MCB-09 Nos.


of 28

SERVICE TEXTS FOR ITEM 80 Supply, Installation, testing and commissioning of wall mounted lighting DB, double door Construction, Constructed with 2 mm sheet steel enclosure along with a housing to mount the entire board. With required hardware, making connections including providing cable glands, lugs, earthing & painting etc. Arrangement for termination of cables/wires including three phase and neutral bus bars etc. complete in all respects. Incomer: 63 amps 4P, ELCB, Outgoing: 20amps SPMCB-03 Nos. and 16 A SP MCB-06 Nos. SERVICE TEXTS FOR ITEM 81 UPS Distribution Board. Design, supply, installation, testing & commissioning of Electrical (UPS) distribution panel as per specifications & single line diagrams including transportation to site at the place of installation, proper storage, unpacking, assembly of sections, mounting and wiring of loose accessories supplied by the equipment vendor etc., installation on foundations or fixing to wall, aligning, leveling, testing, calibration of meters and all other accessories, including all labor and materials as per specifications of this tender and directions of Engineer-In-Charge SERVICE TEXTS FOR ITEM 82 250A, 415V, 4- Pole Design, Supply, installation, testing & commissioning of sheet steel enclosed MCCB of following rating as per technical specifications of this tender and directions of Engineer-in-Charge( all MCCBs shall be of 35 kA rating and shall be mounted on wall/structure on a steel bracket assembly made of painted MS structural steel) SERVICE TEXTS FOR ITEM 83 125A, 415V, TPN, 4-Pole Design, Supply, installation, testing & commissioning of sheet steel enclosed MCCB of following rating as per technical specifications of this tender and directions of Engineer-in-Charge( all MCCBs shall be of 35 kA rating and shall be mounted on wall/structure on a steel bracket assembly made of painted MS structural steel) SERVICE TEXTS FOR ITEM 84 250A, 415V, 4P, On-load, AC23. Supply, installation, testing and commissioning of change over switch along with its cable boxes in sheet steel enclosed construction of following ratings: - SERVICE TEXTS FOR ITEM 85 Removing of cables (from one station) and relaying (at the same or another station) of Cu. /Al. conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armored cables from trenches, cable trays /loose excavated soil, through PVC/G.I./CEMENT conduits in/on the ground/wall/false ceiling/roof etc. Work includes removing of cables without damaging overall system, from GI conduits, cable trays, etc. and relaying it in conduits, cable trays , glands, termination, testing, commissioning, transportation and connections including all labor and materials as per the electrical industry standard specifications & specifications of this tender and directions of the engineer-in-charge. SERVICE TEXTS FOR ITEM 86 Design, Fabrication, Manufacture and erection of Junction Boxes / Sheet Steel Enclosures / MS base frames, Structural Steel Supports for Main Power Distribution Switch boards / Panels, Main / Sub Lighting Distribution Boards / Panels, Switch gear such as Moulded Case Circuit Breaker, Fuse switch Unit, Change Over switch, etc., Lighting Fixtures / Fittings, Junction Boxes ,Choke Boxes, Metal clad, Plug Sockets etc. Junction Boxes / Sheet Steel Enclosures shall be made up of 14 SWG Sheet Steel and Structural Supports / Base Frames shall be made out of MS angles, channels, flats etc supplied by the contractor only including


of 28

cutting to length, drilling holes, welding, bolting, including application of one coat of antirust primer after cleaning thoroughly and two finishing coats of epoxy based enamel paint. SERVICE TEXTS FOR ITEM 87 Design, Fabrication, Supply and installation of 2mm thick sheet steel canopy for monsoon protection of static / outdoor equipment such as switch boards, starters, Automatic Voltage Regulators, etc. Contractor shall get the canopy design approved by IGL Engineer In Charge before fabrication of the canopy. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 88 Fabrication, Supply / delivery & erection / installation at Site of structural steel support for lighting fixture as per Site requirement. This item rate shall not include the cost required for the erection of the Pole. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 89 Supply and fixing of MCBs of 63A, TP&N MCB, 10 KA, suitable for operation on 3 Phase (4 Wire), 415V, 50 Hz System. Make of the MCBs shall be Siemens / L&T / Indocop / MDS / Schneider as per the directions of the Site Engineer. SERVICE TEXTS FOR ITEM 90 Supply and fixing of MCBs of 16A, TP&N MCB, 10 KA, suitable for operation on 3 Phase (4 Wire), 415V, 50 Hz System. Make of the MCBs shall be Siemens / L&T / Indocop / MDS / Schneider as per the directions of the Site Engineer. SERVICE TEXTS FOR ITEM 91 Supply and fixing of MCBs of 6A, DP, MCB, 10 KA, G-Series suitable for operation on 1 Phase (2 Wire), 240V, 50 Hz System. Make of the MCBs shall be Siemens / L&T / Indocop / MDS / Schneider as per the directions of the Site Engineer. SERVICE TEXTS FOR ITEM 92 Supply and fixing of An outdoor type fo 3 Phase, 415V, 50 Hz up to and including 7.5hp Induction Motors Direct On Line (DOL) Starter suitable for starting of Industrial Type, Squirrel cage Induction Motors of below mentioned capacity. The starter shall comprise contactor, bi-metallic over load relay with built in SPP (incase of 3 Phase), terminals as required for power and control cable termination, start push button . stop push button, wiring as required to make the starter fully operational, etc. complete in all respects. The starter shall be of Make L&T / Siemens / Controls & switch gear / Schneider Electric only. SERVICE TEXTS FOR ITEM 93 Supply & Installation of 1 Inch wide HDPE (High Density Poly Ethylene) casing with cover, bends, T – Joints for wiring below the false ceiling / surface wiring on walls inside various rooms. This item rate shall include the cost of supply & fixing of G.I. Hardware, G.I. Sleeve at wall crossing, chipping / breaking of brick / RCC Wall & re plastering to original finish. Ladder, if required for the job, shall be arranged by the Contractor only. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge.


of 28

SERVICE TEXTS FOR ITEM 94 Supply & installation of Flame Proof & Weather Proof in material LM-6, 4 Way Junction Boxes approved by Chief Controller of Explosives, Nagpur / CMRI. The JBs shall be of make Baliga / FCG / Ex-Protecta / CEAG Control gear / Sudhir Switchgear. JBs shall be provided with 04 Nos. 0.75 Inch sized cable entries (electrical threaded) suitable for glanding of 4C X 2.5 mm2, 1.1KV Grade, Type AYFY or YFY cable. The job shall be complete in all respects including the cost of all materials, structural supports, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 95 Supply & installation of Weather Proof in material LM-6 4 Way Junction Boxes approved by Chief Controller of Explosives, Nagpur / CMRI. The JBs shall be of make Baliga / FCG / Ex-Protecta / CEAG Control gear / Sudhir Switchgear. JBs shall be provided with 04 Nos. 0.75 Inch sized cable entries (electrical threaded) suitable for glanding of 4C X 2.5 mm2, 1.1KV Grade, Type AYFY or YFY cable. The job shall be complete in all respects including the cost of all materials, structural supports, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 96 MAIN ACB PANNEL WITH # 1. 2000 AMP MANUAL DRAW OUT TYPE, 55 KA, ACB 2. 800 AMP., 4P MCCB 3. 3 NOS OF 400 AMP, 4P MCCB 4. 250 AMP, 4P MCCB (Delete) 5. 200 AMP, 4P MCCB 6. 400 AMP ONLOAD CHANGEOVER 7. KVAH & KWAH, ENERGY METERING OF SECURE(ELITE) ECO AW-3 OR EQUIVALENT 8. ALUMINIUM BUS BAR 2250 AMP. WITH PROVISIONS OF TWO EXHAUST FANS OF CROMPTON GREEVES OF EQUIVALENT. COST OF PANNEL TO INCLUDE THE COST OF MATERIAL, LABOUR, MANFUCTURING, INSTALLATION, CONNECTIONS, TERMINATIONS, TESTING, COMMISIONING AND ALL SPARE PARTS REQUIRED FOR MAKING THE PANNEL COMPLETELY FUNCTIONAL AT SITE. SERVICE TEXTS FOR ITEM 97 SUPPLY & INSTALLATION OF THREE PHASE PANEL OF 50 KW, 60 WAY THREE PHASE RATING, including supply, installation, testing & commissioning of panel as per specifications & single line diagrams including transportation to site at the place of installation, proper storage, unpacking, assembly of sections, mounting and wiring of loose accessories supplied by the equipment vendor etc., installation on foundations or fixing to wall, aligning, leveling, testing, calibration of meters and all other accessories. including all labour and materials as per specifications of this tender and directions of Engineer-In-Charge SERVICE TEXTS FOR ITEM 98 SUPPLY & INSTALLATION OF 25 KW, 28 WAY 3 PHASE LDB WITH ALL ACCESSORIES as per instruction of engineer-in-charge


of 28

SERVICE TEXTS FOR ITEM 99 Supplying & Laying ISI marked NP-2/NP-3 (NP-2 shall be used in case of Non availability of NP-3)RCC Hume pipe incl. cost of necessary excavation, laying & backfilling and PCC 1:3:6 for bed and haunches, joining the pipes with cement pipes of 1:1 mortar complete 150MM DIA SERVICE TEXTS FOR ITEM 100 LOADING / UNLOADING/ SHIFTING OF PANEL UP TO 1000KG including disconnection & deglanding of all the incoming / outgoing feeder cables of Switch boards / Power / Lighting Distribution Boards / Panels /UPS Power Distribution Boards / Panels / Change Over Switches with enclosures /Change Over Fuse Switch Units with enclosures / Fuse Switch Units with enclosures /UPS Power Systems with battery backup, etc. up-to 1000 Kg weight and transporting the same to IGL Ware House or to any CNG Station premises of IGL anywhere in Delhi. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL #s Engineer In Charge. SERVICE TEXTS FOR ITEM 101 SUPPLY & FIXING OF STAR DELTA STARTER UP TO 13 HP. Starter suitable for starting of Industrial Type, Squirrel cage Induction Motors of mentioned capacity. The starter shall comprise contactors, over load relay with built in SPP (incase of 3 Phase), terminals as required for power and control cable termination, start push button, stop push button, wiring as required to make the starter fully operational, etc. complete in all respects. The starter shall be of Make L&T / Siemens / Controls & switch gear / Schneider Electric only. SERVICE TEXTS FOR ITEM 102 Supply and laying of 3.5C x 120 sq.mm Al. conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. SERVICE TEXTS FOR ITEM 103 Providing & fixing 12 X 1.5 mm2 cable (For 24V DC intrinsically, digital cables). SERVICE TEXTS FOR ITEM 104 Supply and laying of 3.5C x 70 sq.mm Cu. conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in readymade trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. SERVICE TEXTS FOR ITEM 105 Supply and laying of 4C x 25 sq.mm Cu. conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in readymade trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. SERVICE TEXTS FOR ITEM 106 Supply and laying of 4C x 10 sq.mm Cu. conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India,


of 28

Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in readymade trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. SERVICE TEXTS FOR ITEM 107 Supply and laying of 4C x 4 sq.mm Cu. conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in readymade trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. SERVICE TEXTS FOR ITEM 108 Dismantling including disconnection & deglanding of all the incoming / outgoing feeder cables of Switch boards / Power / Lighting Distribution Boards / Panels / UPS Power Distribution Boards / Panels / Change Over Switches with enclosures / Change Over Fuse Switch Units with enclosures / Fuse Switch Units with enclosures / UPS Power Systems with battery back up, etc. 1001-2000 Kg weight and transporting the same to IGL Ware House or to any CNG Station premises of IGL anywhere in Delhi. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 109 Erection, Testing and Commissioning (excluding glanding and termination of all the incoming / outgoing feeder cables) of IGL Supplied Switch boards / Power / Lighting Distribution Boards / Panels / UPS Power Distribution Boards / Panels / Change Over Switches with enclosures / Change Over Fuse Switch Units with enclosures / Fuse Switch Units with enclosures / UPS Power Systems with battery backup, etc. of 1001-2000 Kg weight. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 110 Providing & fixing 3 MCCB panel with 1 no. 400 amp mccb X 2 no. 250 amp mccb. SERVICE TEXTS FOR ITEM 111 Providing & fixing MCCB panel having capacity 630 amp. SERVICE TEXTS FOR ITEM 112 Providing & fixing capacitor bank 80 kvar. SERVICE TEXTS FOR ITEM 113 Providing & fixing gland 185 mm2 commet make double compression. SERVICE TEXTS FOR ITEM 114 Providing & fixing gland 300 mm2 commet make double compression. SERVICE TEXTS FOR ITEM 115 Providing & fixing lugs in cable connections 300 mm.


of 28

SERVICE TEXTS FOR ITEM 116 Providing & fixing lugs in cable connections 150 mm. SERVICE TEXTS FOR ITEM 117 Providing & fixing lugs in cable connections 185 mm. SERVICE TEXTS FOR ITEM 118 Providing & fixing lugs in cable connections 95 mm. SERVICE TEXTS FOR ITEM 119 Supply and fixing of Motor Duty, 4 Pole, Moulded Case Circuit Breakers (MCCBs) of rating up to & including 100A and having short circuit withstanding capacity of 16KA / 20KA / 35 KA/ 50KA as per the directions of Site Engineer and suitable for operation on 3 Phase (4 Wire), 415V, 50 Hz system. MCCBs shall be of Make Siemens / GE Power Controls / L&T as per the directions of Site Engineer. SERVICE TEXTS FOR ITEM 120 Supply and fixing of MCBs of 32A, DP, MCB, 10 KA, G-Series suitable for operation on 1 Phase (2 Wire), 240V, 50 Hz System. Make of the MCBs shall be Siemens / L&T / Indocop / MDS / Schneider as per the directions of the Site Engineer. SERVICE TEXTS FOR ITEM 121 Supply and fixing of MCBs of 32A, SP, MCB, 10 KA, G-Series suitable for operation on 1 Phase (2 Wire), 240V, 50 Hz System. Make of the MCBs shall be Siemens / L&T / Indocop / MDS / Schneider as per the directions of the Site Engineer. SERVICE TEXTS FOR ITEM 122 Supply, Installation and commissioning of Exhaust Fan of Crompton / Bajaj / Alstom / GEC or any other make subject to prior approval of IGL and of 1440 RPM, suitable for use on 240V, 50 Hz, Single Phase with frame gravity drop louvers, clamps, etc. complete as required 300 sweep size. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 123 Supply & Installation of 18 Way MCB Enclosure / Box, 16 Gauge MS Painted Sheet with hinged covers of MDS / Havells Make including making electrical connections, testing, commissioning complete ; this item rate shall not include the cost of MCBs to be housed in the Enclosure / Box. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 124 Providing and fixing 5A plug point and 5A, three pin plate socket outlet with 5A switch of MK/ Schnider make and earthing the third pin with 8 SWG Copper earth wire connections, etc. complete and carrying out wiring with flexible, Single Core, PVC Insulated Copper Conductor of Size 2.5 mm2, 650V Grade, ISI wires in heavy duty ISI 20 mm PVC conduit laid in existing tray / on wall / floor complete. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings , Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 125


of 28

Supplying & fitting 20 / 40 Watt Copper Choke of BIS Stds. For fluorescent tube of approved make like Philips, Bajaj, Crompton, Oshram and any other* make (subject to prior approval of IGL) and suitable for operation on 1 Phase, 240V, 50 Hz, AC supply. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. Note: Item of any other make shall have 6 months free of cost replacement guarantee. SERVICE TEXTS FOR ITEM 126 Supply, installation, testing & commissioning of Building Lighting and Power Plug Socket including concealed point wiring with heavy duty PVC conduit earth wire, on / off switches etc. as required..20 Amp 3 Pin Industrial type socket with 20 Amp. SP MCB sheet steel enclosure with 4 sq. mm Cu. Conductor PVC insulated point wiring for air conditioner. SERVICE TEXTS FOR ITEM 127 Supply, installation, testing & commissioning of Building Lighting and Power Plug Socket including concealed point wiring with heavy duty PVC conduit earth wire, on / off switches MMI Room/ Office - FCS 31/211 make Philips or equivalent. SERVICE TEXTS FOR ITEM 128 On load phase change over switches along with its cables box in sheet steel enclosed construction of make L&T/ Havells / HPL. (A) 630 AMPS, 415V, 3P,Onload, AC23 SERVICE TEXTS FOR ITEM 129 250A. 415V, TPN Design, supply, installation, testing & commissioning of sheet steel enclosed fuse switch units of following ratings as per specifications of this tender and directions of Engineer-in-Charge ( All FSUs shall be AC 23 rating and shall be mounted o wall/structure on a steel bracket assembly made of painted of MS structure steel), SERVICE TEXTS FOR ITEM 130 125A. 415V, TPN Design, supply, installation, testing & commissioning of sheet steel enclosed fuse switch units of following ratings as per specifications of this tender and directions of Engineer-in-Charge ( All FSUs shall be AC 23 rating and shall be mounted o wall/structure on a steel bracket assembly made of painted of MS structure steel), SERVICE TEXTS FOR ITEM 131 125A, 415V, 4P, On-load, AC23. Supply, installation, testing and commissioning of change over switch along with its cable boxes in sheet steel enclosed construction of following ratings: - SERVICE TEXTS FOR ITEM 132 Demolishing PLAIN CEMENT CONCRETE (PCC) work (taking all necessary safety Precautions) for all depths below plinth level including supply of all tools & tackles, necessary scaffolding, propping, underpinning etc. , disposal of unserviceable material outside the IGL boundary limits keeping IGL indemnified of any liabilities from statutory / local bodies, all complete as specified & directed. (Excavation & Backfilling shall be paid separately under relevant items). SERVICE TEXTS FOR ITEM 133 Providing and laying Plain cement Concrete for all depths below and up to plinth level in foundations, drains, fillings, non-suspended floors, pavement sand ramps or any other works


of 28

etc. including shuttering, tamping, ramming, vibrating, curing etc. all as specified, in any shape , position, thickness and finishing the top surface rough or smooth as specified and directed, all complete for concrete of nominal mix 1:2:4 by mass (1 cement:2 coarse sand:4 crushed stone aggregates/gravels) with 20mm down size graded crushed stone aggregates/ gravels. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR SERVICE TEXTS FOR ITEM 134 Construction of Earthing Pit including carrying out necessary excavation & backfilling , providing necessary watering arrangement for the pit, providing necessary charcoal, salt dust, etc. and providing a proper Earth Pit Cover made up of RCC as per the latest version of IS: 3043 using 100 mm dia G.I. Pipe including supply of all the earthing materials required as per IS : 3043 for the purpose of grounding the body of all electrical equipment such as Main Power Distribution Boards, Motors, Automatic Voltage Regulators, Lighting Panels, etc. or for the purpose of grounding of the neutral of DG Sets or for the purpose of electronic grounding of instrumentation Systems such PLC Control Panels for Gas Engine driven Compressors, Metering Skids, UPS Systems, Gas Dispensing Units, etc. Earth Pit Resistance shall be measured , recorded and submitted to IGL Engineer In Charge for reference & records. Mobilization of Earth Test Megger for measurement of earth PIT Resistance is the responsibility of the Contractor. The Earth Pit Cover shall be painted as follows for identification purpose. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge.:- SERVICE TEXTS FOR ITEM 135 Supply and laying of 4C x 35 sq.m Al. conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in readymade trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. SERVICE TEXTS FOR ITEM 136 Demolishing RCC work (taking all neccesssary safety precautions) for all depths below plinth level including supply of all tools & tackles, necessary scaffolding, propping, underpinning etc. , cutting, straightening, scraping & cleaning of reinforcement bars, stacking of serviceable material, disposal of unserviceable material outside the IGL boundary limits keeping IGL indemnified of any liabilities from statutory / local bodies, all complete as specified & directed. (Excavation & Backfilling shall be paid separately under relevant items). SERVICE TEXTS FOR ITEM 137 Supplying and lying (horizontally/vertically/underground/above ground) through Conduits/Trays, testing, commissioning, of the PVC insulated, Sheathed , Armoured 240 Sq.mm*3.5 Core Cu cable of approved ISI mark make as mentioned in tender including lugs etc complete in all respects. Work includes the supply of wires, termination and connection including all labour and materials as per the specifications of this tender and directions of the engineer-in-charge. SERVICE TEXTS FOR ITEM 138 Supl/ laying of profibus cable should be of Siemens make having Part no. 6XV18300EH10. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. Supl/Laying includes laying in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc.


of 28

SERVICE TEXTS FOR ITEM 139

Supply, installation, testing & commissioning of sheet steel enclosed MCCB of rating 400A, 415V, 4- Pole as per technical specifications of this tender and directions of Engineer-in-Charge( all MCCBs shall be of 35 kA rating and shall be mounted on wall/structure on a steel bracket assembly made of painted MS structural steel) SERVICE TEXTS FOR ITEM 140 Supply & Installation of Flexible armored Conduit of size 4" Inch for mechanical protection of the cables. Flexible pipe must consist of armored wire inside the conduit. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. SERVICE TEXTS FOR ITEM 141 Supply & Installation of Flexible armored Conduit of size 3" Inch for mechanical protection of the cables. Flexible pipe must consist of armored wire inside the conduit. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. SERVICE TEXTS FOR ITEM 142 Providing & fixing 24 X 1.5 mm2 shielded armoured cable. Cable should be shielded with combination of both foil and braid shields. The job shall be complete in all respects including the cost of all materials, tools, labour, etc. Supl/Laying includes laying in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. SERVICE TEXTS FOR ITEM 143 Supl/ Installation of 2 quadrant energy meter consists of installation of energy meter in panel. Meter must consists of parameters such as : Voltage, Current, Frequency, Power factor, KWH, KVAH etc. Meter should not work at capacitive load. Meter should have dimensions as 96mm X 96 mm. Energy meter make should be make Siemens / L&T / AE / KAY CEE / Concore / Havells / Alstom/ Rishabh or any other Make approved by Power Distribution Companies BSES / NDPL (Tata Power) / NDMC as directed by Site In charge. The job shall be complete in all respects including the cost of tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL #s Engineer In Charge. Job consists of wiring of Energy meter. SERVICE TEXTS FOR ITEM 144 Supply and Installation of 80W LED canopy light should have System lumens efficacy i.e. Lumens/watts > 120. Make: Havells, Model: Canopy 80W LED. Light should have Extruded aluminium housing with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. Light should by one on one replacement of 250 W HPMV lamp type canopy light conventional fittings. Light Should have Power factor > 0.9. Light Nominal voltage should be 240V. Light should be Suitable for pole mounting with bracket arm OD .Light Should have In-built electronic driver with two output channels each with APFC and THD<33%, Output Short circuit protection,Surge voltage protection and other reliability tests as per IS:15885 part2/ section 13 . Light fitting should have suitable arrangement for cable termination with gland opening of suitable size. Installation consists of wiring of light from existing cable and successfully start up of light. Installation also consists of removal of existing light packing of removed light and handing over to concerned department. No additional transportation will be paid for the same. Light Should be designed for IP65. Technical drawing is as enclosed as Appendix 'iii'


of 28

SERVICE TEXTS FOR ITEM 145 Supply and Installation of 80W LED Street light should have System lumens efficacy i.e. Lumens/watt s > 80. Make: Havells, Model: Endura Cityliner Neo. Light should by one on one replacement of 250 W HPMV lamp type conventional street light fittings. Light Should have Power factor > 0.9. Light Nominal voltage should be 240V. Light should be Suitable for pole mounting with bracket arm OD .Light Should have In-built electronic driver with APFC and THD<15%. Light fitting should have suitable arrangement for cable termination with gland opening of suitable size. Installation consists of wiring of light from existing cable and successfully startup of light. Installation also consists of removal of existing light packing of removed light and handing over to concerned department. No additional transportation will be paid for the same. Light Should be designed for IP66 protection. Technical drawing is as enclosed as Appendix 'iv' SERVICE TEXTS FOR ITEM 146 Supply and Installation of twin LED light Batten suitable for two LED tube lights. Batten should have mounting On ceiling/ wall with screws at a distance of 930 mm, suspend by 2 nos. Ø19 mm conduit pipe at a distance of 600 mm. Installation consists of wiring of light from existing cable and successfully startup of light. Installation also consists of removal of existing light, packing of removed light and handing over to concerned department. No additional transportation or charges will be paid for the same. SERVICE TEXTS FOR ITEM 147 Supply and Installation of Single LED light Batten. Batten should have mounting On ceiling/ wall with screws at a distance of 900 mm, suspend by 2 nos. Ø19 mm conduit pipe at a distance of 600 mm or with chains at a distance of 700 mm. Installation consists of wiring of light from existing cable and successfully startup of light. Installation also consists of removal of existing light, packing of removed light and handing over to concerned department. No additional transportation or charges will be paid for the same. SERVICE TEXTS FOR ITEM 148 Supply and Installation of LED Tube Retrofit 20W having System lumens range from 1900-2600 lumens. Make: havells. Light should be one on one replacement36W conventional tube light. Tube Light Should have Power factor > 0.9. Light Nominal voltage should be 240V. Installation also consists of removal of existing light packing of removed light and handing over to concerned department. No additional transportation will be paid for the same. SERVICE TEXTS FOR ITEM 149 Repainting of old panels consists of painting of panel after removal of old paint from panels. Double coat should be done at every panel. Painting can be done onsite by using spray bottles, Spray compressor or by power coating as per instructions of engineer. Paint color should be as per directions of engineer. Job consists of wiring of energy meter also job shall be complete in all respects including the cost of all materials, tools, labour, etc. SERVICE TEXTS FOR ITEM 150 Sup/Installation of Analog/ Digital Voltmeter consists of mounting of Voltmeter in panel and wiring for the same as per directions of engineer. Voltmeter rating should be 0- 500V. Voltmeter dimensions should be 96 mm X 96 mm. Voltmeter make should be make Siemens / L&T / AE / KAY CEE / Concore / Havells / Alstom/ Rishabh or any other Make approved by Power Distribution Companies BSES / NDPL (Tata Power)/NDMC as directed by Site In charge. The job shall be complete in all respects including the cost of tools, labour, etc. as per this technical


of 28

specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL #s Engineer In Charge. Job consists of wiring of Voltmeter. SERVICE TEXTS FOR ITEM 151 Sup/Installation of Analog/ Digital Ammeter consists of mounting of Ammeter in panel and wiring for the same as per directions of engineer. Ammeter rating should be 0- 630A. Ammeter dimensions should be 96 mm X 96 mm. Ammeter make should be make Siemens / L&T / AE / KAY CEE / Concore / Havells / Alstom/ Rishabh or any other Make approved by Power Distribution Companies BSES / NDPL (Tata Power) / NDMC as directed by Site In charge. The job shall be complete in all respects including the cost of tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL #s Engineer In Charge. Job consists of wiring of Ammeter. SERVICE TEXTS FOR ITEM 152 Sup/Installation of Analog/ Digital Ammeter consists of mouting of Ammeter in panel and wiring for the same as per directions of engineer. Ammeter rating should be 0- 400A. Ammeter dimensions should be 96 mm X 96 mm. Ammeter make should be make Siemens / L&T / AE / KAY CEE / Concore / Havells / Alstom/ Rishabh or any other Make approved by Power Distribution Companies BSES / NDPL (Tata Power) / NDMC as directed by Site In charge. The job shall be complete in all respects including the cost of tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL #s Engineer In Charge. Job consists of wiring of Ammeter. SERVICE TEXTS FOR ITEM 153 Sup/Installation of Analog/ Digital Ammeter consists of mounting of Ammeter in panel and wiring for the same as per directions of engineer. Ammeter rating should be 0- 250A. Ammeter dimensions should be 96 mm X 96 mm. Ammeter make should be make Siemens / L&T / AE / KAY CEE / Concore / Havells / Alstom/ Rishabh or any other Make approved by Power Distribution Companies BSES / NDPL (Tata Power) / NDMC as directed by Site In charge. The job shall be complete in all respects including the cost of tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL #s Engineer In Charge. Job consists of wiring of Ammeter. SERVICE TEXTS FOR ITEM 154 Sup/Installation of Digital Multifunction meter consists of mounting of meter in panel and wiring for the same as per directions of engineer. Meter dimensions should be 96 mm X 96 mm. Meter make should be make Siemens / L&T / AE / KAY CEE / Concore / Havells / Alstom or any other Make approved by Power Distribution Companies BSES / NDPL (Tata Power) / NDMC as directed by Site In charge. The job shall be complete in all respects including the cost of tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL #s Engineer In Charge. Job consists of wiring of Multifunction meter. SERVICE TEXTS FOR ITEM 155 Supplying and fixing of Indicating lamps transformer type with slide fuses of make Siemens / L&T / AE / KAY CEE / Concore / Havells / Alstom or any other Make approved by Power Distribution Companies BSES / NDPL (Tata Power) / NDMC as directed by Site In charge. SERVICE TEXTS FOR ITEM 156 Supply and laying of Single core, 16 mm2 sized, Unsheathed, Flexible, Copper


of 28

Conductor Wire / cable as per IS – 694 Special Purpose, PVC Insulated, Low Tension Cables of make Finolex / Phonix / Polycab / Unistar or equivalent make subject to prior approval from IGL and including the supply of the required materials such as copper cable lugs for termination of the cable. SERVICE TEXTS FOR ITEM 157 Supply and laying of Single core, 10 mm2 sized, Unsheathed, Flexible, Copper Conductor Wire / cable as per IS # 694 Special Purpose, PVC Insulated, Low Tension Cables of make Finolex / Phonix / Polycab / Unistar or equivalent make subject to prior approval from IGL and including the supply of the required materials such as copper cable lugs for termination of the cable. SERVICE TEXTS FOR ITEM 158 Supl/ Installation and of 1'X1' hinge type earth pit covers for earthing pits. Installation consists of removal of earlier cemented covers. Supl/ Installation also consists of Painting and marking of covers. The job shall be complete in all respects including the cost of tools, labour, etc. SERVICE TEXTS FOR ITEM 159 Supl/ Installation and of 2'X2' hinge type earth pit covers for earthing pits. Installation consists of removal of earlier cemented covers. Supl/ Installation also consists of Painting and marking of covers. The job shall be complete in all respects including the cost of tools, labour, etc. SERVICE TEXTS FOR ITEM 160 Supply & Installation of Aluminium Cable Tags indicating Cable Tag No., Equipment being fed, Cable Size, Source of Power, etc. as directed by IGL Engineer In Charge. SERVICE TEXTS FOR ITEM 161 Fixing, connecting, testing & commissioning of 0-100A Ammeter of size 96 mm X 96 mm and with 03 Nos. 100A / 1A CT & Selector of make Siemens / L&T / AE / KAY CEE /Concore / Havells / Alstom or any other Make approved by Power Distribution Companies BSES / NDPL (Tata Power) / NDMC as directed by Site In charge. The job shall be complete in all respects including the cost of tools, labour, etc. as per this technical specification, applicable drawings, Special Terms & Conditions of this tender and as per directions of IGL ‘s Engineer In Charge. SERVICE TEXTS FOR ITEM 162 Supply and laying of 3.5C x 150 sq.mm Al. conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc. SERVICE TEXTS FOR ITEM 163 Supply and laying of 3.5C x 95 sq.mm Al. conductor cable PVC insulated, PVC sheathed, 1100V Grade, Armoured cables (of sizes mentioned below) of Make Cable Corporation of India, Universal Cables, Nicco Cables, Cords, and Polycab, conforming to IS 1554 in ready made trenches, overhead/trench cable trays, in loose excavated soil, through PVC/G.I. conduits in/on the ground/wall/false ceiling/roof etc.


of 28

SERVICE TEXTS FOR ITEM 164 Providing & fixing 1 X 12 pair ESCS Cu cable. Work includes the supply of wires, termination, testing, commissioning and connection including all labour and materials as per specifications of this tender and directions of the engineer-in-charge. SERVICE TEXTS FOR ITEM 165 Providing & fixing 1 X 16 pair ESCS Cu cable. Work includes the supply of wires, termination, testing, commissioning and connection including all labour and materials as per specifications of this tender and directions of the engineer-in-charge. SERVICE TEXTS FOR ITEM 166 Providing & fixing 1.5 X 6 pair ESCS Cu cable. Work includes the supply of wires termination, testing, commissioning and connection including all labour and materials as per specifications of this tender and directions of the engineer-in-charge.

corrigendum #3 igl/nd/c&p/c14148 25.01.2017 subject: … · outgoing feeder cables) of igl...

Documents