cylinder fm200 all

This literature is provided for informational purposes only. KIDDE-FENWAL,INC. assumes noresponsibility for the product's suitability for a particular application. The product must beproperly applied to perform as described herein.If you need more information on this product, or if you have a question, contact KIDDE-FENWAL,INC., Ashland, MA 01721; Telephone (508) 881-2000

TM

R

KIDDE-FENWAL, INC.400 MAIN STREET, ASHLAN D, MA 01721TEL: (508) 881-2000 FAX: (508) 881-8920

FM-200 COMPONENT DESCRIPTION Effective June 1999

FEATURES• FOR USE WITH UL LISTED, ULC LISTED & FMRC APPROVED SYSTEMS

FM-200 COMPONENT DESCRIPTIONCylinder and Valve Assemblies 10 LB (4.5 KG) - 70 LB (31.4 KG)Capactiy, Vertical Mount

F-93-2010

MATERIALSVALVE BODY: BRASSCYLINDER: STEEL, PAINTED RED

ORDERING INFORMATION

P/N: 93-10000X0-001

NOTES:1. THE SAFETY CAP MUST BE INSTALLED ON THE VALVEOUTLET AT ALL TIMES EXCEPT WHEN THE CYLINDERSARE CONNECTED TO THE SYSTEM PIPING OR BEINGFILLED. THE SAFETY CAP MUST NOT BE REMOVED FROMITS CHAIN.2. SEE F-93-2070 FOR ADDITIONAL INFORMATION.3. CYLINDERS ARE VERTICAL MOUNT ONLY.

F-93-2010 ©1999 Kidde-Fenwal, Inc. Printed in U.S.A.

CYLINDER VALVE

SAFETY CAP

SYPHON TUBE

CYLINDER

A

B

C

rebmuNtraP eziS.lyCsnoisnemiD

*A *B *C

100-010001-39 .sbL01 70.7 43.31 03.71

100-020001-39 .sbL02 70.7 10.12 79.42

100-040001-39 .sbL04 00.9 08.22 67.62

100-070001-39 .sbL07 00.9 78.43 38.83

.sehcninierasnoisnemiD*

This literature is provided for informational purposes only. KIDDE-FENWAL,INC. assumes noresponsibility for the product's suitability for a particular application. The product must beproperly applied to perform as described herein.If you need more information on this product, or if you have a question, contact KIDDE-FENWAL,INC., Ashland, MA 01721; Telephone (508) 881-2000

TM

R




Cylinder and Valve Assemblies 10 LB. (4.5 KG) - 70 LB. (31.7 KG)Capacity, Horizontal Mount Only, Modular Balanced Systems Only

F-93-2020




P/N: 93-1000X1-001

NOTES:1. THE SAFETY CAP MUST BE INSTALLED ON THE VALVEOUTLET AT ALL TIMES EXCEPT WHEN THE CYLINDERSARE CONNECTED TO THE SYSTEM PIPING OR BEINGFILLED. THE SAFETY CAP MUST NOT BE REMOVED FROMITS CHAIN.2. SEE F-93-2070 FOR ADDITIONAL INFORMATION.3. CYLINDERS ARE HORIZONTAL MOUNT ONLY.4. NOT FOR USE WITH ENGINEERED SYSTEMS.

rebmuNtraP eziS.lyCsnoisnemiD

*A *B *C

100-010001-39 .sbL01 70.7 43.31 03.71

100-020001-39 .sbL02 70.7 10.12 79.42

100-040001-39 .sbL04 00.9 08.22 67.62

100-070001-39 .sbL07 00.9 78.43 38.83

.sehcninierasnoisnemiD*

This literature is provided for informational purposes only. KIDDE-FENWAL,INC. assumes noresponsibility for the product's suitability for a particular application. The product must beproperly applied to perform as described herein.If you need more information on this product, or if you have a question, contact KIDDE-FENWAL, INC., Ashland, MA 01721; Telephone (508) 881-2000

TM

R




Cylinder and Valve Assembly 125 LB (56.7 KG) Capacity

F-93-2030



NOTES:1. THE SAFETY CAP MUST BE INSTALLED ON THE VALVEOUTLET AT ALL TIMES EXCEPT WHEN THE CYLINDERSARE CONNECTED TO THE SYSTEM PIPING OR BEINGFILLED. THE SAFETY CAP MUST NOT BE REMOVED FROMITS CHAIN.2. SEE F-93-2070 FOR ADDITIONAL INFORMATION.

P/N: 93-10012X-001

CYLINDER VALVE

LIQUID LEVEL INDICATOR

LIFTING LUGS

CYLINDER

NAMEPLATE

12,75” DIA

CYLINDER

VALVE OUTLET

30°

PLAN VIEW

SAFETY CAP

35.93” 31.97”


N/P NOITPIRCSED

100-121001-39100-521001-39

ILL/WDTS


TM

R




F-93-2040





NOTES:1. THE SAFETY CAP MUST BE INSTALLED ON THE VALVEOUTLET AT ALL TIMES EXCEPT WHEN THE CYLINDERSARE CONNECTED TO THE SYSTEM PIPING OR BEINGFILLED. THE SAFETY CAP MUST NOT BE REMOVED FROMITS CHAIN.2. SEE F-93-2070 FOR ADDITIONAL INFORMATION.

P/N: 93-10020X-101

N/P NOITPIRCSED

101-002001-39101-102001-39

DTSILL/W


TM

R




F-93-2050




NOTES:1. THE SAFTY CAP MUST BE INSTALLED ON THEVALVE OUTLET AT ALL TIMES EXCEPT WHEN THECYLINDERS ARE CONNECTED TO THE SYSTEMPIPING OR BEING FILLED. THE SAFETY CAPMUST NOT BE REMOVED FROM ITS CHAIN.2. SEE F-93-2070 FOR ADDITIONAL INFORMATION.


CYLINDER VALVE


LIFTING LUGS

CYLINDER

NAMEPLATE

16.00" DIA

CYLINDER

VALVE OUTLET

30°

PLAN VIEW

SAFETY CAP

58.36" 53.14"

P/N: 93-10035X-001

N/P NOITPIRCSED

100-053001-39100-153001-39

DTSILL/W


TM

R




F-93-2060


MATERIALSVALVE BODY: BRASSCYLINDER; STEEL, PAINTED RED


CYLINDER VALVE


LIFTING LUGS

CYLINDER

NAMEPLATE

22.00" DIA

CYLINDER

VALVE OUTLET

30°

PLAN VIEW

SAFETY CAP

56.72" 50.51"

NOTES:1. THE SAFETY CAP MUST BE INSTALLED ON THEVALVE OUTLET AT ALL TIMES EXCEPT WHEN THECYLINDERS ARE CONNECTED TO THE SYSTEMPIPING OR BEING FILLED. THE SAFETY CAPMUST NOT BE REMOVED FROM ITS CHAIN.2. SEE F-93-2070 FOR ADDITIONAL INFORMATION.


P/N: 93-10060X-001

N/P NOITPIRCSED

100-006001-39100-106001-39

DTSILL/W


TM

R




F-93-2070


Cylinder Data

(Sheet 1 of 2)

ENGINEERED SYSTEMS CYLINDER DATA

NOTE: ENGINEERED SYSTEMS HAVE A FILL DENSITY RANGE OF 30 LB/CU FT TO 70 LB/CU FT

TRAPREBMUN

EGNARLLIFYTPMETHGIEW

THGIEWSSORG

ILL/WTHGIEH RETEMAID EMULOV

LLIFNIM LLIFXAM

BL GK BL GK BL GK BL GK NI MC NI MC TF 3 M3

100-010001-39 01-5 5-3 52 11 03 41 53 61 ON 03.71 44 70.7 81 761.0 7400.0

100-020001-39 02-9 9-4 13 41 04 81 15 32 ON 79.42 46 70.7 81 682.0 1800.0

100-040001-39 04-71 81-8 83 71 55 52 87 53 ON 67.62 86 00.9 32 275.0 2610.0

100-070001-39 07-03 23-41 25 42 28 83 321 65 ON 38.83 99 00.9 32 000.1 3820.0

100-121001-39 521-45 75-52 89 54 251 96 322 101 SEY 39.53 29 57.21 33 887.1 6050.0

100-521001-39 521-45 75-52 89 54 251 96 322 101 ON 39.53 29 57.21 33 887.1 6050.0

100-002001-39 002-68 19-93 931 36 522 201 143 451 ON 53.05 821 06.31 53 958.2 0180.0

100-102001-39 002-68 19-93 141 46 722 301 343 551 SEY 53.05 821 06.31 53 958.2 0180.0

101-002001-39 002-68 19-93 331 06 912 001 333 151 ON 57.25 431 57.21 33 958.2 0180.0

101-102001-39 002-68 19-93 331 06 912 001 333 151 SEY 57.25 431 57.21 33 958.2 0180.0

100-053001-39 053-051 951-86 102 19 153 951 555 052 ON 63.85 941 00.61 14 000.5 6141.0

100-153001-39 053-051 951-86 302 29 143 061 755 152 SEY 63.85 941 00.61 14 000.5 6141.0

100-006001-39 006-852 272-411 533 251 395 072 539 524 ON 27.65 541 00.22 65 275.8 7242.0

100-106001-39 006-852 272-411 733 351 595 072 739 624 SEY 27.65 541 00.22 65 275.8 7232.0


TM

R




F-93-2080

Cylinder Valve

WORKING PRESSURE: 360-609 PSIGPROOF PRESSURE: 1000 PSIGBURST PRESSURE 2000 PSIGTEMPERATURE RANGE: 0 TO 130 F

MATERIALSVALVE BODY: BRASSPISTON: BRASSFINISH: NATURALSEAT: RUBBER

EQUIVALENT LENGTH OF SCHEDULE 40 PIPE:1-1/2" : 16.7' OF 1-1/4"2" : 28.0' OF 2"2½" : 31.5' of 2½"

P/N: 93-1X0000-000


24 LB

15 LB

9.9 LB

2-1/2"

2"

1-1/2"

VALVE SIZE

SAFETY

DISCHARGE

OUTLET PORT

CAP

93-160000-000

93-150000-000

93-140000-000

PART NO.

F: WEIGHT

E: SAFETY DISC REPL. P/N

D: SAFETY DISC RELIEF PRESSURE

6.61"

6.28"

5.22"

6.30"

5.32"

4.83"

10.04"

8.80"

7.63"

A B

C

C

SEAT

798-972 PSI

798-972 PSI

754-900 PSI

D

264929

264925

242461

E F

CONNECTION

PRESSURE

SUPERVISORY

SWITCH

PISTON

SAFETY CHAIN

VENT HOLE

PRESSURE

PROTECTION

CAP

GAGE

VALVE CORE, PILOT

CONNECTION

ACTUATION PORT

CONTROL HEAD

B

BODY

1/8" NPT

ACTUATION PORT

SAFETY

SLAVE CYLINDER

A

DISC


TM

R



FEATURES• FOR USE WITH UL LISTED, ULC LISTED & FMRC APPROVED

SYSTEMS

F-93-2090

Cylinder Supervisory Pressure Switch

ELECTRICAL RATING:120/240/277 V-AC 375 VA28V-AC/DC 2 AMPS5.8 FLA-34.8 LRA @ 120 V2.9 FLA-15 LRA @ 240 V

MEMA 1 ENCLOSUREACTUATION PRESSURE: 320 PSI +/- 10 PSIDEACTUATION PRESSURE: 250 PSI +/- 10 PSIOPERATING TEMPERATURE RANGE: +30 F TO +130 FOPERATION EXAMPLE: "NORMALLY CLOSED" DEVICECONTACTS ARE OPEN UNDER PRESSUREPRESSURE LOSS GREATER THAN 40 PSI WILL CAUSE CON-TACTS TO CLOSE P/N: 8787090X

NOITAREPO N/P

NEPO(DESOLCYLLAMRON)ERUSSERPREDNU

00907878

DESOLC(NEPOYLLAMRON)ERUSSERPREDNU

10907878




TM

R




SYSTEMS

F-93-2100

Valve Outlet Adapters


NOTE: FOR DIRECT CONNECTION OF CYLINDER VALVE TODISTRIBUTION PIPING.MATERIAL: BRASS

.ONTRAP EZIS *A *B *C *D

409382 2/1-12/1-1

TPN2/1-11478.1JNU21

96.2 XEH05.2

509382 22

TPN2/1-11005.2JNU21

21.3 XEH00.3

609382 2/1-22/1-2TPN8

00.3JNU21

00.3 XEH57.3

P/N: 28390X

CD

A (SYSTEM PIPE CONNECTION)

B (VALVE OUTLET CONNECTION)



TM

R


FM-200 COMPONENT DESCRIPTION Effective June1999


F-93-2110

Liquid Level Indicator



REDNILYC N/PEPATILL

521 186532

002 498382

053 498382

006 498382

CAP

GRADUATED TAPE

O-RING

P/N: WK-566109-160

BRASS TUBE

FM-200

EDGE OF FITTING

BRASS TUBE

TAPE INSIDE

READING TAKEN AT TOP

P/N: SEE TABLE

TAPE IN MAGNETIC INTERLOCK

POSITION READY TO TAKE

READING.

CYLINDER

LIQUID LEVEL

MAGNETIC END OF

TAPE ENGAGES

IN MAGNETIC FIELD

OF FLOAT WHEN

TAPE IS PULLED

UP TO TAKE READING

MAGNET EMBEDDED

FLOAT - FLOATS ON SURFACE

FM-200

IN FLOAT

OF LIQUID FM-200.

FREE TO MOVE UP OR DOWN

OUTSIDE OF BRASS TUBE.

RETAINER - FLOAT RESTS

HERE WHEN CYLINDER

IS EMPTY.


TM

R




F-93-2120

Flexible Discharge Hoses


MINIMUM BURSTING PRESSURE: 2000 PSIWORKING PRESSURE: 500 PSIPROOF PRESSURE: 1000 PSI

MATERIALSHOSE: REINFORCED RUBBER HOSEFITTING: BRASS

A

HOSE

SYSTEM PIPE CONNECTION,

MALE NPT THREAD

FM-200 CYLINDER VALVE

CONNECTION, SWIVEL NUT

.ONTRAP TPNELAM A SUIDARDEB.NIM

898382 2/1-1 42 5.01

998382 2 13 5.31

009382 2/1-2 84 5.22



TM

R




SYSTEMS

F-93-2130

Manifold El-Check


A

B

VALVE BODY

C

C CHECK

FOR CONNECTION TO

ARROW INDICATES

SYSTEM MANIFOLD

FLOW DIRECTION

PART NO. SIZE A* B* C*

877690 2 3.93 4.88 2 - 11-1/2 NPT

2-1/2 - 8 NPT5.764.692-1/2878743

NOTE: EL-CHECKS ARE TO BE INSTALLED AT SYSTEM MANI-FOLD IN VERTICAL DIRECTION AS SHOWN

NOTE: DO NOT USE AS A MAIN/RESERVE CHECK VALVEWITH MORE THAN 1 MAIN/RESERVE CYLINDER

MATERIALSVALVE BODY: ZINC PLATED STEELCHECK: STAINLESS STEELSEAT: NITRILE RUBBER

*DIMENSIONS ARE IN INCHES


TM

R




F-93-2131

Typical Installation of El-Check


NOTES: INSTALL EL-CHECKS SO THAT ARROW IS INDIRECTION OF FLOW

EL-CHECK MAY BE ADJUSTED AS SHOWN TO OB-TAIN A SMOOTH RADIUS IN FLEXIBLE DISCHARGEHOSE.


TM

R




F-93-2140

360 Degree Pendant Nozzle


A SELECTION OF ORIFICES ARE AVAILABLE FOREACH NOZZLE SIZE. CONSULT YOUR FENWALDESIGN AND INSTALLATION MANUAL FOR DETAILS P/N: 93-19402X-XXX

2.500" (63.50mm)

1.250" (31.75mm)

1.500" (38.10mm)

1.750" (44.45mm)

2.250" (57.15mm)

3.000" (76.20mm)

Pipe Size

2.250" (57.15mm)

1.750" (44.45mm)

3.000" (76.20mm)

1.250" (31.75mm)

2.250" (63.50mm)

1.500" (38.10mm)

2" (50.80mm)

1-1/2" (38.10mm)

1" (25.40mm)

1-1/4" (31.75mm)

3/4" (19.05mm)

1/2" (12.20mm)

2.937" (74.59mm)

1.937" (49.19mm)

2.125" (53.97mm)

2.375" (60.32mm)

2.750" (69.85mm)

3.125" (79.37mm)

2.000" (50.80mm)

1.950" (49.53mm)

1.718" (43.63mm)

1.578" (40.08mm)

1.468" (37.28mm)

2.062" (52.37mm)

A

A

360 DEGREE NOZZLE

B C

C

D

KI D

METAL STAMP X-XXX (HOLE DIA. SIZE)

IN .093 ± .031 HIGH

CHARACTERS ON ANY FLAT

B


TM

R




F-93-2150

180 Degree Pendant Nozzle


A SELECTION OF ORIFICES ARE AVAILABLE FOREACH NOZZLE SIZE. CONSULT YOUR FENWALDESIGN AND INSTALLATION MANUAL FOR DETAILS

P/N: 93-19401X-XXX

2.875" (73.02mm)

2.656" (67.46mm)

2.218" (56.33mm)

1.950" (48.89mm)

1.687" (42.84mm)

2.950" (74.93mm)

Pipe Size

1/2" (12.20mm)

3/4" (19.05mm)

1-1/4" (31.75mm)

1" (25.40mm)

1-1/2" (38.10mm)

2" (50.80mm)

1.250" (31.75mm)

1.375" (34.92mm)

1.562" (39.67mm)

1.750" (44.45mm)

1.968" (49.98mm)

1.950" (48.89mm)

1.500" (38.10mm)

2.250" (63.50mm)

1.250" (31.75mm)

3.000" (76.20mm)

1.750" (44.45mm)

2.250" (57.15mm)

A

180 DEGREE NOZZLE

A

30°

KID

DE

B C

60°

B

IN .093 ±.031 HIGH CHARACTERS

METAL STAMP X-XXX (DASH NO.)

ON ANY FLAT

C

D

3.656" (92.86mm)

3.250" (82.55mm)

2.671" (67.84mm)

2.296" (58.31mm)

2.000" (50.80mm)

3.625" (92.07mm)

D


TM

R




F-93-5010

Pressure Operated Control Head


P/N: 878737MATERIALBODY: RETAINING NUT, AND PISTON: BRASS

1.250-18

UNEF-3B

SWIVEL NUT

PISTON

1/8"-27 NPT

PRESSURE INLET

SET

OPERATED

2.19"

1.50" HEX

1.00" HEX


TM

R




F-93-5020

Pressure Operated Control Head, Stackable


MATERIALBODY, RETAINER CAP, PISTON & MTG. NUT: BRASS P/N: 878750


TM

R




F-93-5030

Lever or Pressure Operated Control Head


MATERIALSLEVER: STAINLESS STEELBODY & PISTON: BRASS

P/N: 878751


TM

R




F-93-5040

Pilot Actuation Fittings


MATERIAL: BRASS


TM

R




SYSTEMS

F-93-5050

Nitrogen Pilot Cylinder, Bracket, and Adapter


MATERIALSCYLINDER: STEEL, PAINTED BLACKVALVE: BRASSBRACKET: STEEL, PAINTED BLACKADAPTER: BRASS

P/N: 877940


TM

R




F-93-5070

1/4" Flexible Actuation Hoses


MATERIALSHOSE: WIRE BRAIDED, TEFLON LINING (CRES T304)COUPLINGS: BRASSMINIMUM BURST PRESSURE: 12,000 PSIGOPERATING PRESSURE: 3000 PSIGTEST PRESSURE: 4500 PSIGMINIMUM BEND RADIUS 2.5"

P/N: 26498x


TM

R




F-93-5080

Master Cylinder Adapter Kit


MATERIALSADAPTER & CAP: BRASSCHAIN: STAINLESS STEELLABEL: MYLAR

P/N: 844895

1.42"

1/4" MALE NPT X 5/16" TUBING

PROTECTION CAP

CAUTION

INSTALL CAP

WHEN

NOT IN

USE

LABEL


TM

R




F-93-5090

1/4" Check Valve


WORKING PRESSURE: 0-1800 PSI (0-124 BAR)MINIMUM BURSTING PRESSURE: 5000 PSI (345 BAR)

MATERIAL: BRASS

NOTE: INSTALL VALVE WITH ARROW POINTING INDIRECTION OF FLOW.

P/N: 264985


TM

R




SYSTEMS

F-93-5100

3/8" Check Valve


TECHNICAL DATAWORKING PRESSURE: 0 TO 5000 PSI (0 TO 345 BAR)PROOF PRESSURE: 10,000 PSI (690 BAR)CRACKING PRESSURE: 2 TO 4 PSI (.14 TO .28 BAR)OPERATING TEMPERATURE: -40F TO 250F (-40F TO 121C)

MATERIALSBODY: BRASSSEAL: BUNA-N

1.00"2.35"

(60 MM) (25 MM)

HEX

3"

8NPT BOTH ENDS

INSTALL VALVE WITH ARROW POINTING

IN DIRECTION OF FLOW.

P/N: 261193


TM

R




F-93-5110

Check Valves, 1/2" Thru 2"


VALVE MUST BE INSTALLED WITH ARROW POINTING INDIRECTION OF FLOW

MATERIAL: BRASS


TM

R




F-93-5120

Check Valves, 2-1/2" & 3"


VALVE MUST BE INSTALLED WITH ARROW POINT-ING IN THE DIRECTION OF FLOW

MATERIALSVALVE BODY: BRASSGASKET: IRONFLANGES, BOLTS, & NUTS: STEEL

P/N: 870100

EGNALFKCENGNIDLEW

EVLAVKCEHCEZIS

N/PYTQ

DERIUQER

"2/1-2 617362 2

"3 0021-0186 2



TM

R




F-93-5130

Stop (Directional) Valves, 1/2" Thru 2"


NOTES:1. VALVE MUST BE INSTALLED WITH ARROW POINTING INDIRECTION OF FLOW.2. VALVE MAY BE INSTALLED IN HORIZONTAL OR VERTI-CAL PIPE RUN.

MATERIALSBODY: BRASS

TRAPREBMUN

EZISEVLAVTPN

A B C

NI MM NI MM NI MM

320078220078221078230078321078940078

"2/1"4/3

"1"4/1-1

"2/1-1"2

57.352.45.55.55.75.7

59801041041191191

5.218.226.326.357.457.4

46172929121121

86.486.578.678.634.834.8

911441571571412412

B

C

A

INLETVALVE SIZE

OUTLET

(NPT)

BOTH ENDS

1-1/4 - 18 NF-3 FOR CONTROL HEAD CONNECTION


TM

R




F-93-5140

Stop (Directional) Valves, 2-1/2" & 3"


VALVE MUST BE INSTALLED WITH ARROW POINTINGIN DIRECTION OF FLOW

MATERIALSVALVE BODY: BRASSGASKET: IRONFLANGES, BOLTS, & NUTS: STEEL

P/N: 890010


CONNECTION

FOR CONTROL HEAD

1 - 1/4” -18 NF-3 MALE

3/4” X 4 - 1/2”

OUTLET

(249mm)

9.81"INLET

10.5"

(267mm)

3/4” HEX NUT

P/N 1523-0800

16 REQUIRED

GASKET

P/N 200973

2 REQUIRED

WELDING NECK FLANGE

P/N 263716

(114mm) LG.

HEX BOLT

P/N 1966-4872

-16 REQUIRED

SIDE VIEW

WITHOUT

ASSEMBLED FLANGE

FLANGE - 6.62" (168mm)

BOLT CIRCLE

8.25" (210mm) DIA.

EVLAVKCEHCEZIS

N/PKCENGNIDLEW

N/PEGNALF)DERIUQER2(

"2/1-2 010098 617362

"3 010098 0021-0186


TM

R




F-93-5150

4" Stop (Directional) Valve


VALVE MUST BE INSTALLED WITH ARROW POINTING INDIRECTION OF FLOWMATERIALS

VALVE BODY: BRASSGASKET: IRONFLANGES, BOLTS, & NUTS: STEEL

P/N: 890208

10.75" (273mm) DIA.

BOLT CIRCLE

FLANGE - 8.50" (216mm)

ASSEMBLED FLANGE

WITHOUT

SIDE VIEW

P/N 1966-5680-

16 REQUIRED

HEX BOLT

7/8” X 5" (127mm) LG.

2 REQUIRED

P/N 6810-1600

WELDING NECK FLANGE

2 REQUIRED

P/N 200150

GASKET

16 REQUIRED

P/N 1523-5600

7/8” HEX NUT

(308mm)

12.12"

INLET

4"

11.06"

(281mm)

OUTLET

1- 1/4” -18 NF-3 MALE

FOR CONTROL HEAD

CONNECTION


TM

R




F-93-5160

Discharge Indicators


MATERIALSBODY-967082: BRASSBODY-875553: ALUMINUMCAPS: CLEAR CELLULOSE ACETATE

EZIS N/P

)SSARB("4/3 280769

)LA("2/1 355578


NORMAL

DISCHARGE

POSITION

INDICATION

POSITION

CAP

STEM

3.25"

(83mm)

BODY

NPT MALE

1.12"(29mm) HEX

ACROSS FLATS

3"

4

P/N 967082

2.62"

(67mm)

P/N 875553

BODY

NPT MALE

0.93"(24mm) HEX

ACROSS FLATS

1"

2

POSITION

INDICATION

POSITION

DISCHARGE

NORMAL

STEM-RED

CAP


TM

R




F-93-5170

Safety Outlets


MATERIALSBODY & RETAINING NUT: BRASSSEAL WIRE: COPPER & LEAD

BODY

SEAL WIRE

SAFETY DISC

RETAINING NUT

NPT MALE

1.78"

(45mm)

3"

4

PART

NUMBERAGENT

PRESSURE RELIEF

OPERATES AT

PSI BAR

803242 2400-2800 166-193

844346 FM-200 750-900 52-62

N2/CO2


TM

R




F-93-5180

Pressure Operated Switch


P/N: 486536

NOTES:1. SWITCH MAY BE MOUNTED IN ANY POSITIONBUT PREFERRED INSTALLATION IS UPRIGHT ASSHOWN.2. ANY LOAD CONNECTION TO THE SWITCH MUSTNOT EXCEED SWITCH RATING AND SHALL UTILIZEA SUITABLE PROTECTION DEVICE (ie. CIRCUITBREAKER, FUSE)3. CONTACT RATINGS (3PDT)15 AMP @ 125 VAC10 AMP @ 250 VAC3/4 HP @ 250 VAC1, 2 OR 3 PHASE


TM

R




F-93-5190

Pressure Operated Switch, Explosion Proof


NOTES:1. TOGGLE SWITCH MAY BE MOUNTED IN BASEFOR EITHER N.O. TO N.C. OR N.C. TO N.O. CON-TACT TRANSFER UPON OPERATION. ILLUSTRATIONSHOWS POSITION OF TOGLE WHEN SWITCH IS INSET POSITION.2. ANY LOAD CONNECTED TO THE SWITCH MUSTNOT EXCEED SWITCH RATING AND SHALL UTILIZEA SUITABLE PROTECTION DEVICE. (ie. CIRCUITBREAKER, FUSE)

3. REMOVE OPERATING HEAD TO MAKE ELECTRI-CAL CONNECTIONS TO TOGGLE SWITCH. WHENREPLACING OPERATING HEAD, ENSURE THATTOGGLE ENGAGES CLUTCH. TIGHTEN COVERSCREWS SECURELY.4. CLASS I, GROUP D CAUTION: TO PREVENTIGNITION OF HAZARDOUS ATMOSPHERES,DISCONNECT THE DEVICE FROM THE SUPPLYCIRCUIT BEFORE OPENING. KEEP ASSEMBLYTIGHTLY CLOSED WHEN IN OPERATION.

P/N: 981332


TM

R




F-93-5200

Pressure Trip


MAXIMUM LOAD ON RING: 100 LBS. (45 KG)MINIMUM NOMINAL OPERATING PRESSURE:50 PSI (3.5 BAR)MATERIALS

BODY, BRACKET, AND PISTON: BRASSGUARD, STEM, RING AND SPRING: STAINLESSSTEEL

P/N: 874290

1.37"

SPRING

PISTON

2.50"

(64mm)

(41mm)

HEX

PRESSURE INLET

½”NPT - FEMALE

1.62"

(41mm)

BODY

RING

STEM

GUARD BRACKET WITH

.375"(10mm) DIA.

MOUNTING HOLE


TM

R




F-93-5201

Pressure Trip Applications - Installation Detail



TM

R




F-93-6010

Lever Operated Control Head


MATERIALSLEVER: STAINLESS STEELBODY: BRASS

P/N: 870652


TM

R




F-93-6020

Cable Operated Control Head


P/N: 979469

LOCAL MANUAL RELEASE LEVER

SEAL WIRE

LOCKING PIN

DIRECTION OF

PULLTHREADED NUT -

3/8" NPS FOR PIPE

1/16" CABLE

3/8" PIPE (OR 1/2" EMT

WITH ADAPTER P/N

843837 - SEE F-93-6120)

SWIVEL

NUT

1.50"

(38mm)

1-1/4"-18 NF-3

FEMALE

CLOSURE

DISC

CABLE CLAMP AND WHEEL ASSEMBLY

4.25"

5.25"

(108mm)

(133mm)


TM

R




F-93-6021

Tandem Cable Operated Control Heads - Installation Detail


CYLINDER CENTERS

HEAD (CLOSURE DISC REMOVED)

SLOT IN CONTROL

HOUSING FITS INTO

FLARE ON CABLE

1/16” CABLE

WHEEL ASSEMBLY

SEE F-93-6030

CABLE HOUSING

3/8” PIPE OR

ADAPTER P/N

843837-SEE F-93-6120

CABLE CLAMP AND


TM

R




F-93-6030

Cable Housing for Cable Operated Control Heads


MATERIAL: Brass, .625" (16mm) O.D. x .049" (1.28 mm) WALL

FLARED3/8" NPS MALE

A

TRAPREBMUN

SREDNILYCHTIWDESU

REDNILYCSRETNEC

NOISNEMID"A"

SBL GK NI mm NI mm

207062159062206362

002,521053006

7.09-7.657.8511.272

0.510.810.42

183754016

6.016.316.91

072643894


TM

R




F-93-6040

Pull Box, Break Glass


MATERIALSBody: AluminumHandle: Brass

P/N: 871403

400 Main Street - Ashland, MA 01721-2150

Tel.(508)881-2000 FAX (508)881-8920

KiddeR

FOR FIREBREAK GLASS PULL HANDLE

PULL HARD

OPTIONAL

NAMEPLATE

(BY INSTALLER)

HAMMER

PULL

4-COVER

3/8” PIPE

1/16” CABLE

SCREWS

HANDLE

2 - NAMEPLATE

BRACKETS-

(SUPPLIED WITH

PULL BOX)

5.87"

5.00" 2.25"

(57mm)(127mm)

(149mm)

PULL HANDLE

CABLE FASTENER FOR

BREAK GLASS

P/N WK-928103-000

1/16” CABLE

3/8” NPT FEMALE2 - HOLES FOR 1/4”

MOUNTING SCREWS

(SCREWS NOT SUPPLIED

WITH PULL BOX)SECTION VIEW

WK-524906-080

P/N

P/N WK-803246-000

P/N WK-934617-000


TM

R




F-93-6041

Break Glass Pull Box used with Z-Bracket - Installation Detail


P/N 60532

Z-BRACKET

(90mm)

SEE F-93-6120

ADAPTER P/N 843837

3.56"

SEE F-93-6080

PULLEY-P/N 844648-2

E.M.T. CORNER

(114mm)

4.50"

16

1"CABLE

E.M.T.1"

2

1"

1"

4MOUNTING BOLTS HERE

3 HOLES FOR

Z-BRACKET

P/N 60532 (90mm)

3.56"

SEE F-93-6080

PULLEY P/N 803808

4.50"

(114mm)

WATERTIGHT CORNER

NPT NIPPLE8

3"

CABLE1"

16


TM

R




F-93-6100

Dual Pull Mechanism


P/N: 840058


TM

R




F-93-6110

Dual Pull Equalizer


P/N: 840051


TM

R




F-93-6120

Adapter, 3/8" Pipe (Male) to 1/2" EMT (Female)


MATERIAL: ZINC PLATED STEEL

P/N: 843837


TM

R




F-93-7145

Cylinder Recharge Adapters


MATERIAL: ZINC PLATED STEEL

3.624.00600878759

3.254.06200, 350878758

878757 10-125 3.22 2.50

B*A*CYL. SIZE (LB)P/N

* DIMENSIONS ARE IN INCHES

3/8" NPT (VENT

VALVE CONNECTION

"A"

3/8"-18NPT

(CHARGE CONNECTION)

O-RING

SEAL

CYLINDER VALVE

OUTLET CONNECTION

"B"

HEX


TM

R




F-93-8010

Electric Control Head


P/N: 8901XX

PU

ELECTRIC

CONTROL HEAD

VOLTS

AMPS

PART NO.

SET RELEASED

MADE IN U. S. A.

TO RESETUSE SCREWDRIVER

CONNECTION FOR FLEXIBLE

ELECTRIC CONDUIT-

3/4" NPT FEMALE

LOCKING PIN

LOCAL MANUAL

RELEASE LEVER

SWIVEL NUT

1.50" (38mm) HEX

1-1/4"-18 NF-3 THREAD

CONTROL HEADPART

NUMBER

890181

890149

890165

VOLTAGE

24 VDC

125 VDC

115 VAC

CURRENT

2.0A

0.3A

1.0A

KIDDE-FENWAL, INC.

400 MAIN STREET

ASHLAND, MA 01721

INDICATOR AND

RESET STEM

6.18"

4.00"

(157mm)

(102mm)

SEAL WIRE



TM

R




F-93-8017

Electric Control Head, Stackable Explosion Proof


P/N: 486500-01

VOLTAGE: 24VDCCURRENT: 0.2A CONTINUOUS DRAW

5.28"

2.90"

1.25-18 UNEF-2A

1/2"-14 NPT

(3) 18 AWG-LEADS

CONDUIT

CONNECTION

18" LONG

CONNECTION

SWIVEL NUT

1.25-18 UNEF-2B

CONNECTION

ELECTRIC CONTROL HEAD, PART

NO. 486500-01 IS RATED FOR USE

IN HAZARDOUS (CLASSIFIED)

LOCATIONS CLASS 1, DIV. l,

GROUPS C, D AND CLASS ll, DIV. ll,

GROUPS E, F, G BETWEEN

-40F AND 140F. USE CONDUIT

SEAL WITHIN 18 IN. (45cm) OF

THIS DEVICE.

NOTE:THIS CONTROL HEAD IS POLARIZED. IMPROPERWIRING WILL RESULT IN FAILURE OF THIS DEVICE TOOPERATE

WARNINGELECTRIC CONTROL HEAD, P/N: 486500-01, IS DESIGNEDFOR INSTALLATION DIRECTLY ON 487 SERIES HALONAND MODEL 9300 FM-200 VALVES ONLY. THIS CONTROLHEAD MUST NOT BE INSTALLED ON ANY OTHER TYPEOF HALON OR FM-200 CYLINDER VALVE, NITROGENVALVE, CARBON DIOXIDE CYLINDER VALVE, FE-13 CYL-INDER VALVE OR STOP (DIRECTIONAL) VALVE. INSTAL-LATION OF THIS CONTROL HEAD TO ANY OTHER DE-VICE (E.G., PRESSURE OPERATED CONTROL HEAD) WILLRESULT IN FAILURE OF DEVICE TO OPERATE.


TM

R




F-93-8030

Electric And Cable Operated Control Head


7.56"

(192mm)

(138mm)

5.44"

CONTROL HEAD

895630

895628

895627

PART No.

115 VAC

125 VDC

24 VDC

VOLTAGE

1.0

0.3

2.0

AMPS

MADE IN U. S. A.

RELEASED

ASHLAND, MA 01721

400 MAIN STREET

KIDDE-FENWAL, INC.

SET

WIRE

RESET STEM

INDICATOR AND

3/4" NPT (FEMALE)

ELECTRIC CONDUIT-


LOCKING PIN

RELEASE LEVER

LOCAL MANUAL

ELECTRIC

PART NO.

VOLTS

CONTROL HEAD

USE SCREWDRIVER

TO RESET

AMPS

1 1/4-18NF-3 THREAD

1.50" (38mm) HEX

SWIVEL NUT

SEAL

1/2" E.M.T. CONNECTION

COMPRESSION TYPE FOR

REMOTE CABLE

1/2" E.M.T. CONNECTION

COMPRESSION TYPE TO

SECOND CONTROL HEAD

IF USED

PU


TM

R




F-93-8040

Electric and Cable Operated Control Head withExplosion Proof Solenoid


SE

TR

ELE

AS

ED

TO

RE

SE

T

US

ES

CR

EW

DR

IVE

R

FO

R

MA

INT

EN

AN

CE

SE

E

INS

TR

UC

TIO

NS

CA

BL

E

PU

LL

PU

OPERATING SOLENOID

U.L. LISTED FOR USE IN

THE FOLLOWING HAZARDOUS

LOCATIONS:

CLASS GROUP OP. TEMP.

I C


ELECTRIC CONDUIT 1/2" NPT

FEMALE

CONNECTING WIRES

36" (914 MM) LONG

7.375

INDICATOR AND

RESET STEM

(187 MM)

4.937

(125 MM)

LOCKING PIN

SEAL WIRE

CONNECTION FOR

REMOTE PULL BOX

PIPE OR CONDUIT

3/8" NPS MALE

LOCAL MANUAL

RELEASE LEVER

SWIVEL NUT

1.500 (38 MM) HEX

1.250-18 NF-3 THREADCONNECTION FOR CABLE

HOUSING TO SECOND

CONTROL HEAD IF USED

3/8" NPS FEMALE.

USE PNEUMATIC CONTROL

HEAD CABLE HOUSINGS

SEE F-93-5020.

EL

EC

TR

IC

CO

NT

RO

LH

EA

D

PA

RT

NO

.

MA

DE

INU

.S.A

.

KID

DE

-FE

NW

AL

,IN

C.

40

0M

AIN

ST

RE

ET

AS

HL

AN

D,

MA

01

72

1

VO

LT

S

HZ

AM

PS

-13 TO +150F

(-25 TO +65C)

I D

(-40 TO +65C)

-40 TO +150F

II E,F,G -40 TO +150F

(-40 TO +65C)

PART

NUMBER

CONTROL HEAD

VOLTAGEPOWER

CONSUMPTION

897494 24 VDC 33 WATTS

897560 120 VAC 15.4 WATTS


TM

R




F-93-8070

Electric Main-To-Reserve Transfer Switch


MATERIALSCONDUIT BOX: STEEL WITH RED ENAMEL FINISHTOGGLE SWITCH LEVER: BAKELITE

P/N: 802398


TM

R




F-93-8130

Cylinder Mounting Straps


MATERIAL: STEEL, PAINTED BLACK SAE 1020


TM

R




F-93-8140

Cylinder Wall Brackets


MATERIAL: STEEL, ZINC PLATEDSAE 1010


TM

R




F-93-8150

Cylinder Mounting Cradle


MATERIAL: STEEL, PAINTED GRAY AISI M1020


TM

R




F-93-9010

Main and Reserve Nameplates


MATERIAL: ALUMINUM WITH RED PAINT LETTERSP/N: 3103X

5.00"

1.62"

(41mm)

(127mm)

RESERVE

P/N 31034 2-0.281"(7mm) DIA.

MOUNTING HOLES

MOUNTING HOLES

2-0.281"(7mm) DIA.P/N 31033

MAIN

(127mm)

(41mm)

1.62"

5.00"


TM

R




F-93-9030

Warning Nameplate (FM-200)


P/N: 06-231865-739

MATERIAL: ALUMINUM TYPE 1100-H14 OR 3003-H14,.032 + .003 THICK. ALL LETTERS TO BE 48 PT.ALTERNATE GOTHIC #2. ETCHED .003 - .005 & FILLEDIN WITH RED CHIP PROOF ENAMEL COLOR NO.21105 PER FED. STC. 595FINISH: ONE COAT CLEAR LACQUER BOTH SIDES

TM

.281 .005 DIA. TYP. 4 HOLES

±.062

5.000

.340

.340 9.360

10.000 ±.063

4.360

WARNING

THIS AREA IS PROTECTED BY A

FM-200 EXTINGUISHING

SYSTEM. DO NOT ENTER WITHOUT

AUTHORIZATION DURING OR

AFTER DISCHARGE

cylinder fm200 all

Documents