dando mintec 9000 (dando drilling indonesia)
TRANSCRIPT
Dando Drilling International
Dando Mintec 9000-9000kgf pullback-High speed/high torque rotary head-High pressure air/water swivel-RC and RAB compatible-Main winch for handling tools/casing-Wireline winch-Mast dump for angle drilling-Hydraulic rod clamps-Onboard coring pump
The Dando Mintec 9000 is a medium sized multipurpose mineral exploration rig capable of deep wireline coring, reverse circulation (RC) and rotary air blast (RAB) drilling.
Dando Mintec 9000
Drilling Rig SpecificationCarrier Options Crawler mounted is standard but can also be supplied on a heavy duty commercial 4 x
4 or 6 x 6 truck .
Deck Engine Caterpillar C4.4 diesel engine standard, other options available
Mast Dimensions Working mast height using Working mast using the main winch: 5500mm rotary head: 3700mm
Mast dump to 45°
Head Traverse Hoist = 6m/m (20ft/min) Rapid Hoist = 26m/min (85.5ft/min)
Feed = 20.25m/min (66ft/min) Rapid Feed = 36.5m/min (120ft/min)
Mast Capacity (Standard version)
Pullback: 9000kgf Pulldown: 3250kgf Hook load (max): 9000kgf
Rotary Head Performance
Option 1 Rotation (max) 750rpm Torque (max) 12050Nm
Option 2 Rotation (max) 1250rpm Torque (max) 13000Nm
Rotary head tilt and side shift
Drill Table andBreak Out System
Double acting hydraulic make up and break out clamp with minimum clamping diameter of 60mm and a maximum of 250mm
Other options available
Standard Compressor
Ingersoll Rand XHP 900 (900CFM/350psi)
Other options available
Main Winch Maximum single line pull: 2040kg
Maximum speed: 41m/minute
Drum capacity: 57m of 10mm wire rope
Wireline Winch Maximum single line pull: 1000kg
Maximum speed: 120m/minute
Drum capacity:1150m of 4.76mm (3/16”)wire rope. Other options available.
Coring Pump Standard: Hydraulically driven duplex pump
Maximum flow rate: 146 litres/minute
Maximum discharge pressure: 700psi
Inline Oil Lubricator Fitted as standard and used when operating a DTH hammer
Hydraulic System Hydraulic power circuit based on load sensing hydraulic pumps and proportionalcontrol valves
Drillers Control Panel Uncomplicated and user friendly with ergonomic layout (swing out arm mounting optional)
Rod Spin SafetyGuard
Various options available
Levelling Jacks Two front and two rear jacks with individual locking valves
Lighting and Electrical System
Rig is provided with mast and control panel lighting. Electrical system is 24 volt
Drilling Capacities* 4” RC (25kg/m) drill rod= 288m
PQ (15.33kg/m) drill rod = 470m
HQ (11.6kg/m) drill rod = 621m
NQ (8.0kg/m) drill rod = 900m
Optional Equipment RC Drilling Conversion Kit - For reverse circulation drilling applications
Single Arm Rod Handler
Cyclone
Tool Handling Boom Crane - For loading and unloading drill rod and lightsite work
Automatic Rod Handler
Rod Spinner - Chuck type floating rod spinner with adjustable torque controland side swing in mounting
Hydraulic Foot Clamp with jaws to Suit BQ up to PQ Wireline Drill Rods. Break out system is a double acting hydraulic cylinder with adjustable wrench
Drill Rod Rack - Mounted on carrier
Other options available on request
Dando Drilling International [email protected]
tel: +44 (0) 1903 731312fax: +44 (0)1903 730305
* Based on 80% of drill string weight in dry hole
Please note: All figures and claims made here are indicative and Dando Drilling Internationalreserves the right to make alterations to specification detail without notice. All images are forreference only and may not represent the exact specification outlined in this document.