delta doors 1/2013

40
Steel doors Locks Cylinders Fittings Glazing Accessories Security doors Fire-rated doors External entrance doors Interior entrance doors Standard Certified Handles Protective rosettes Hinges Reflex Mirrored Stained Decor mat Thresholds Opening limiter Door drip Door closer Mortise locks Multi-point locks Electronic locks Hotel locks New! ROYAL door - thickness 84mm MAXIM door - thickness 68mm PRESTIGE door - thickness 88 mm Fanlights Decorative panels Door frame with thermal barrier Stainless steel fittings Glazing with stainless steel and aluminum frames Edition I/2013 2 U = 0,60 W/m K D Prestige PASSIVE DOORS

Upload: zbigniew-rozycki

Post on 06-Mar-2016

223 views

Category:

Documents


0 download

DESCRIPTION

Technical data catalog

TRANSCRIPT

Page 1: Delta doors 1/2013

Steel doors

Locks

Cylinders

Fittings

Glazing

Accessories

Security doors

Fire-rated doors

External entrance doors

Interior entrance doors

Standard

Certified

Handles

Protective rosettes

Hinges

Reflex

Mirrored

Stained

Decor mat

Thresholds

Opening limiter

Door drip

Door closer

Mortise locks

Multi-point locks

Electronic locks

Hotel locks

New!ROYAL door - thickness 84mm

MAXIM door - thickness 68mm

PRESTIGE door - thickness 88 mm

Fanlights

Decorative panels

Door frame with thermal barrier

Stainless steel fittings

Glazing with stainless steel

and aluminum frames

Edition I/2013

e-mail: [email protected]

40-424 Katowiceul. Magazynowa 21

tel. +48 32 730 36 30+48 32 256 55 36

fax +48 32 256 55 52

www.delta.net.pl

2U = 0,60 W/m KD

PrestigePASSIVE DOORS

POLAND

Page 2: Delta doors 1/2013

DELTA is a family owned and managed business,established in 1992 by Mr Zbigniew Rozycki. From the very beginning company has been focused on doors, especially certified security doors and locks. Today, accumulation of technical knowledge, manufacture experience and enthusiasm for innovation has resulted with leading position on domestic market and reputation for quality, service and performance. Company is well recognized as manufacturer of steel security doors for apartments, doors and public buildings. Two production plants, one at Skrzyszow and another at Katowice, both equipped with up-to-date production lines, application of modern technologies and standards, enables to maintain high quality and serve our customers with reliable product and attractive design.

Production plant Skrzyszow

Fragment of door production line

Production plant Katowice

About us. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Universal 45 - all-purpose steel doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Special'2 - reinforced steel doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Premium - anti-burglary steel doors, rated class 3 acc. to ENV1627 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8DeLuxe'2 - anti-burglary steel doors, rated class 3 acc. to ENV1627 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Royal - anti-burglary steel doors, rated class 4 acc. to ENV1627, with increased thermal and acoustic insulation . . . . . . . . 12Maxim - external doors, thickness 68mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Prestige - external passive doors, thickness 88mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Grand S / Grand P - external double leaf doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Magnum 4C, Magnum'2 C3, Magnum'3 2H i Magnum'3 - fire-rated doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Enter S - entrance doors for apartment buildings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Economic - technical doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23GLAZING TYPES with PVC glazing frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24GLAZING TYPES with stainless steel or aluminum glazing frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27FANLIGHTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30DECORATIVE PANELS for interior entrance doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31FITTINGS - standard and optional fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32STAINLESS STEEL FITTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34OPTIONAL ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35DOOR FRAMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36THRESHOLDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37ELECTROMECHANICAL HANDLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38HOTEL SYSTEM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Left opening inside Right opening inside

Right opening outsideLeft opening outside

1. Due to technical limitations of printing, patterns and colors presented in this catalog, may vary from the actual product.2. Due to the time interval between each edition of DELTA catalog, the manufacturer reserves the right to make modifications to

the products and their associated documents, without prior notice.3. Current view and description of our products, should be verified with the website www.delta.net.pl4. This publication does not constitute an offer within the meaning of the law, it is only for informational purposes.5. The manufacturer provides a 24-month warranty on products sold with an authorized installation service, or 12-month

warranty in case of sale without installation. Warranty conditions and installation guide can be found in the product warranty card.

ATTENTION!!!

TABLE OF CONTENTS

2 | DELTA 2013 DELTA 2013 | 3

ABOUT US

DETERMINING OF LEFT/RIGHT DOOR TYPE

Page 3: Delta doors 1/2013

DELTA is a family owned and managed business,established in 1992 by Mr Zbigniew Rozycki. From the very beginning company has been focused on doors, especially certified security doors and locks. Today, accumulation of technical knowledge, manufacture experience and enthusiasm for innovation has resulted with leading position on domestic market and reputation for quality, service and performance. Company is well recognized as manufacturer of steel security doors for apartments, doors and public buildings. Two production plants, one at Skrzyszow and another at Katowice, both equipped with up-to-date production lines, application of modern technologies and standards, enables to maintain high quality and serve our customers with reliable product and attractive design.

Production plant Skrzyszow

Fragment of door production line

Production plant Katowice

About us. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Universal 45 - all-purpose steel doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Special'2 - reinforced steel doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Premium - anti-burglary steel doors, rated class 3 acc. to ENV1627 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8DeLuxe'2 - anti-burglary steel doors, rated class 3 acc. to ENV1627 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Royal - anti-burglary steel doors, rated class 4 acc. to ENV1627, with increased thermal and acoustic insulation . . . . . . . . 12Maxim - external doors, thickness 68mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Prestige - external passive doors, thickness 88mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Grand S / Grand P - external double leaf doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Magnum 4C, Magnum'2 C3, Magnum'3 2H i Magnum'3 - fire-rated doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Enter S - entrance doors for apartment buildings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Economic - technical doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23GLAZING TYPES with PVC glazing frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24GLAZING TYPES with stainless steel or aluminum glazing frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27FANLIGHTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30DECORATIVE PANELS for interior entrance doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31FITTINGS - standard and optional fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32STAINLESS STEEL FITTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34OPTIONAL ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35DOOR FRAMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36THRESHOLDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37ELECTROMECHANICAL HANDLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38HOTEL SYSTEM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Left opening inside Right opening inside

Right opening outsideLeft opening outside

1. Due to technical limitations of printing, patterns and colors presented in this catalog, may vary from the actual product.2. Due to the time interval between each edition of DELTA catalog, the manufacturer reserves the right to make modifications to

the products and their associated documents, without prior notice.3. Current view and description of our products, should be verified with the website www.delta.net.pl4. This publication does not constitute an offer within the meaning of the law, it is only for informational purposes.5. The manufacturer provides a 24-month warranty on products sold with an authorized installation service, or 12-month

warranty in case of sale without installation. Warranty conditions and installation guide can be found in the product warranty card.

ATTENTION!!!

TABLE OF CONTENTS

2 | DELTA 2013 DELTA 2013 | 3

ABOUT US

DETERMINING OF LEFT/RIGHT DOOR TYPE

Page 4: Delta doors 1/2013

Steel doors DELTA UNIVERSAL 45 can be applied as Internal or External entrance doors for offices, industrial premises, housing etc. Certificate ITT acc. to EN 14351-1+A1:2010 includes possibility to install different type of glazing. Leaf – single rebate type, 46mm thick, made of galvanized steel sheet 0.5mm covered by PVC film with wood grain structure. Leaf is filled with board of self-extinguishing polyurethane foam and equipped with two mortise locks, three hinges and three hinge bolts. Frame made of 1,2mm galvanized steel covered by PVC film with wood grain structure. Because doors are made of steel, in case of installation as external entrance doors we recommend to install a small roofing over the door, to prevent overheating from the sunshine. Water resistance class 3B EN-1027 applies only if installed as opened outward. Doors are offered as flat or with pressed patterns. For additional charge, we offer for this doors also: glazing, thresholds with gasket, cylinders in system keyed alike, electromechanical handles.

New! – for additional charge available handles and rosettes made of stainless steel.

REMARK: construction of leaf allows it’s installation also on existing steel frames. Possibility to shorten: leaf flat: 14cm, leaf with pressed pattern: 8cm ; leaf with deep pressed patterns: 5cm

COLORS AND PRESSED MOULDING PATTERNS

CONSTRUCTION

DIMENSIONS AND FRAME PROFILES

DOORS DELTA UNIVERSAL 45

DELTA UNIVERSAL 45 FLATDELTA UNIVERSAL 45 PRESSED LONDONDELTA UNIVERSAL 45 DEEP PRESSED LONDON’2, SUN’2, VERONA

- Threshold for profile UNI made of PCV, with gasket, color dark brown- Threshold for profile UNI made of PCV, with gasket, color: dark wood, golden oak- Threshold for profile UNI made of solid oak, with gasket- Threshold for profile UNI made of aluminum, with gasket- Bottom drip profile - Bottom leaf closing profile - Knob handle KLARA or ANETA

- Electromechanical handle GZF with fingerprint system- Electromechanical handle GI 2324 operated by code or card- Security cylinder GD6 for main lock, certified class 6- Handles, rosettes and escutcheons finished in AB (Antic Brass) color- Choice of glazing panels- Handles, rosettes and escutcheons made of stainless steel

ACCESSORIES

Standard set consist of: door leaf 46mm thick, with two mortise locks- each of them with 3 bolts, steel frame to be assembled - profile UNI or UNI NC (only for size 80), three hinges, three hinge bolts, handle ANNA with escutcheons and protective rosette, two cylinders, door viewer

UNIVERSAL 45

GENERAL PURPOSE STEEL DOORS

Self-extinguishing polystyrene board

Galvanized steel sheet 0.5mm covered by PVC film with wood structure

Hinges

Hinge bolts

Mortise lock 72/50 with handle

Daily mortise lock, with knob

Bottom, closing profile of steel

4 | DELTA 2013 DELTA 2013 | 5

PVC GLA

ZIN

G - se

e p

age 24-26

814

920

844

950

2005

2005

2009

2009

2024

2024

866, 896

972, 1002

2050, 2065

2050, 2065

8

2929

CALVADOS

LIGHT WALNUT

MAHOGANY

GOLDEN OAK

DARK WALNUT

- MAHOGANY- DARK WALNUT- GOLDEN OAK

- CALVADOS (A only at size 80N)

- LIGHT WALNUT- MAHOGANY- GOLDEN OAK

- MAHOGANY- GOLDEN OAK

- MAHOGANY- DARK WALNUT- GOLDEN OAK

- DARK WALNUT- GOLDEN OAK

Door viewer

Protective rosette

DELTA T1

nominal distance

FLATLONDON

PRESSED PATTERN

LONDON’2DEEP PRESSED

PATTERN

SUN'2 DEEP PRESSED

PATTERN

VERONA DEEP PRESSED

PATTERN

OUTSIDE INSIDE

Cylinder DELTA JK with knob

Escutcheon ANNA

Handle ANNA

Cylinder DELTA JK

Thermal transmittance:- Leaf without glazing

2 U [W/(m .K)] = 1,54d

- Leaf with glazing2 U [W/(m .K)] = od 1,61 do 1,68d

Acoustic insulation:R (C;C ) = 27 (-2;-4) dBw tr

PROFILE “UNI” with gasket PROFILE “UNI NC”

PROFILE “UNI” with gasket

PROFILE “UNI NC” (A only at size 80N)

Level “0” of floor

Level “0” of floor

Level “0” of concrete base Level “0” of concrete base

Door width

OU

R S

TAN

DA

RD

HIN

GE

Page 5: Delta doors 1/2013

Steel doors DELTA UNIVERSAL 45 can be applied as Internal or External entrance doors for offices, industrial premises, housing etc. Certificate ITT acc. to EN 14351-1+A1:2010 includes possibility to install different type of glazing. Leaf – single rebate type, 46mm thick, made of galvanized steel sheet 0.5mm covered by PVC film with wood grain structure. Leaf is filled with board of self-extinguishing polyurethane foam and equipped with two mortise locks, three hinges and three hinge bolts. Frame made of 1,2mm galvanized steel covered by PVC film with wood grain structure. Because doors are made of steel, in case of installation as external entrance doors we recommend to install a small roofing over the door, to prevent overheating from the sunshine. Water resistance class 3B EN-1027 applies only if installed as opened outward. Doors are offered as flat or with pressed patterns. For additional charge, we offer for this doors also: glazing, thresholds with gasket, cylinders in system keyed alike, electromechanical handles.

New! – for additional charge available handles and rosettes made of stainless steel.

REMARK: construction of leaf allows it’s installation also on existing steel frames. Possibility to shorten: leaf flat: 14cm, leaf with pressed pattern: 8cm ; leaf with deep pressed patterns: 5cm

COLORS AND PRESSED MOULDING PATTERNS

CONSTRUCTION

DIMENSIONS AND FRAME PROFILES

DOORS DELTA UNIVERSAL 45

DELTA UNIVERSAL 45 FLATDELTA UNIVERSAL 45 PRESSED LONDONDELTA UNIVERSAL 45 DEEP PRESSED LONDON’2, SUN’2, VERONA

- Threshold for profile UNI made of PCV, with gasket, color dark brown- Threshold for profile UNI made of PCV, with gasket, color: dark wood, golden oak- Threshold for profile UNI made of solid oak, with gasket- Threshold for profile UNI made of aluminum, with gasket- Bottom drip profile - Bottom leaf closing profile - Knob handle KLARA or ANETA

- Electromechanical handle GZF with fingerprint system- Electromechanical handle GI 2324 operated by code or card- Security cylinder GD6 for main lock, certified class 6- Handles, rosettes and escutcheons finished in AB (Antic Brass) color- Choice of glazing panels- Handles, rosettes and escutcheons made of stainless steel

ACCESSORIES

Standard set consist of: door leaf 46mm thick, with two mortise locks- each of them with 3 bolts, steel frame to be assembled - profile UNI or UNI NC (only for size 80), three hinges, three hinge bolts, handle ANNA with escutcheons and protective rosette, two cylinders, door viewer

UNIVERSAL 45

GENERAL PURPOSE STEEL DOORS

Self-extinguishing polystyrene board

Galvanized steel sheet 0.5mm covered by PVC film with wood structure

Hinges

Hinge bolts

Mortise lock 72/50 with handle

Daily mortise lock, with knob

Bottom, closing profile of steel

4 | DELTA 2013 DELTA 2013 | 5

PVC GLA

ZIN

G - se

e p

age 24-26

814

920

844

950

2005

2005

2009

2009

2024

2024

866, 896

972, 1002

2050, 2065

2050, 2065

8

2929

CALVADOS

LIGHT WALNUT

MAHOGANY

GOLDEN OAK

DARK WALNUT

- MAHOGANY- DARK WALNUT- GOLDEN OAK

- CALVADOS (A only at size 80N)

- LIGHT WALNUT- MAHOGANY- GOLDEN OAK

- MAHOGANY- GOLDEN OAK

- MAHOGANY- DARK WALNUT- GOLDEN OAK

- DARK WALNUT- GOLDEN OAK

Door viewer

Protective rosette

DELTA T1

nominal distance

FLATLONDON

PRESSED PATTERN

LONDON’2DEEP PRESSED

PATTERN

SUN'2 DEEP PRESSED

PATTERN

VERONA DEEP PRESSED

PATTERN

OUTSIDE INSIDE

Cylinder DELTA JK with knob

Escutcheon ANNA

Handle ANNA

Cylinder DELTA JK

Thermal transmittance:- Leaf without glazing

2 U [W/(m .K)] = 1,54d

- Leaf with glazing2 U [W/(m .K)] = od 1,61 do 1,68d

Acoustic insulation:R (C;C ) = 27 (-2;-4) dBw tr

PROFILE “UNI” with gasket PROFILE “UNI NC”

PROFILE “UNI” with gasket

PROFILE “UNI NC” (A only at size 80N)

Level “0” of floor

Level “0” of floor

Level “0” of concrete base Level “0” of concrete base

Door width

OU

R S

TAN

DA

RD

HIN

GE

Page 6: Delta doors 1/2013

Steel reinforced doors DELTA SPECIAL’2 can be applied as Internal or External entrance doors for offices, industrial premises, housing etc. Certificate ITT acc. to EN 14351-1+A1:2010 includes possibility to install different type of glazing. Leaf – single rebate type, 56mm thick, made of galvanized steel sheet 0.5mm covered by PVC film with wood grain structure. Leaf is filled with board of self-extinguishing polyurethane foam and equipped with two mortise locks, three hinges and three hinge bolts. The main lock DELTA DD6H/Z - certified class 6 acc. to EN 12209:2005 – is operated by cylinder with gear type cam. Frame- made of 1,5mm galvanized steel covered by PVC film with wood grain structure, allows application of additional gasket-advised in case of installation as external entrance doors . Because doors are made of steel, in case of installation as external entrance doors we recommend to install a small roofing over the door, to prevent overheating from the sunshine. Water resistance class 5B EN-1027 applies only if installed as opened outward. Doors are offered as flat or with pressed patterns. For additional charge, we offer for this doors also: glazing, thresholds with gasket, opening limiter, cylinders in system keyed alike, electromechanical handles, also alternative door frame profiles: PU, PD or PN (only for size 80).

NEW! Available – door frame with thermal insulation insert (profile PDT), decorative panels, glazing with frames of Stainless Steel or aluminum, fanlights, fittings of Stainless Steel.

REMARK! Possibility to shorten: leaf flat: 14cm, leaf with pressed pattern: 8cm ; leaf with deep pressed patterns: 5cm

ALU OAKALUALU

6 | DELTA 2013 DELTA 2013 | 7

WHITE

COLORS AND PRESSED MOULDING PATTERNS

CONSTRUCTION

DIMENSIONS AND FRAME PROFILES

DOORS DELTA SPECIAL'2

DELTA SPECIAL'2 FLATDELTA SPECIAL'2 PRESSED LONDONDELTA SPECIAL'2 DEEP PRESSED GENOVA, PARMA, TRENTO, RAMA

- Threshold for profile P55, PU made of PCV, with gasket, color dark brown- Threshold for profile P55, PU made of PCV, with gasket, color: dark wood, golden oak- Threshold for profile P55, PU made of solid oak, with gasket- Threshold for profile PD150, PN150, PDT made of solid oak, with gasket- Threshold for profile P55, PU made of aluminum, with gasket- Threshold for profile PD150, PN150, PDT made of aluminum, with gasket- Open limiter- Electromechanical handle GZF with fingerprint system- Electromechanical handle GI 2324 operated by code or card- Frame profile PU- Frame profile PD150- Frame profile PN150 (A. only at size 80N)- Frame profile PDT 150

- Bottom drip profile - Bottom leaf closing profile - Security cylinder GD6 for main lock, certified class 6- Complete fitting from PREMIUM model- Knob handle KLARA or ANETA- Complete TAMARA fitting- Security cylinder GD6 for main lock with multi-key system, certified class 6- Handles, rosettes and escutcheons finished in AB (Antic Brass) color- Choice of glazing panels- Fanlights- Decorative panels for internal doors- Handles, rosettes and escutcheons made of stainless steel- Leaf shorten service

ACCESSORIES

Standard set consist of: door leaf 56mm thick, with two mortise locks- daily lock with 3 bolts, main lock 6 class with 5 bolts, steel frame to be assembled – profile P55, three hinges, three hinge bolts, handle OLIVIA with escutcheons and protective rosette, two cylinders, door viewer.

Self-extinguishing polystyrene board

Galvanized steel sheet 0.5mm covered by PVC film with wood structure

Steel ribs

Hinge bolts

Mortise lock class 6, with handle

Daily mortise lock, with knob

Bottom, closing profile of steel

Wood grain structure

GLA

ZING

- see

pa

ge 24-29

2038, 2053

2060, 2075

840, 870

962, 1000

1998

2020

87

39

17

CALVADOS

JASNY ORZECH

MAHOGANY

VENGE

GOLDEN OAK

DARK WALNUT

- ANTHRACITE GREY (A only at size 90E)

- WHITE (A only at size 90E)

- MAHOGANY (A only at size 90E)

- DARK WALNUT (A only at size 90E)

- VENGE (A only at size 90E)

- GOLDEN OAK (A only at size 90E)

- ANTHRACITE GREY (A only at size 90E)

- WHITE- CALVADOS (A only at size 80N)

- MAHOGANY- DARK WALNUT- VENGE- GOLDEN OAK

- CALVADOS (A only at size 80N)

- LIGHT WALNUT- MAHOGANY- GOLDEN OAK

- WHITE- CALVADOS (A only at size 80N)

- MAHOGANY- DARK WALNUT- VENGE- GOLDEN OAK

- MAHOGANY- DARK WALNUT- VENGE- GOLDEN OAK

- DARK WALNUT- GOLDEN OAK

ANTHRACITE GREY

nominal distance

STEEL REINFORCED DOORS , flat or pressed Certified class 2 according to European standards ENV 1627

FLATLONDON

PRESSED PATTERNGENOVA

DEEP PRESSED PATTERN

PARMA DEEP PRESSED

TRENTO DEEP PRESSED PATTERN

RAMADEEP PRESSED PATTERN

Door viewer

Protective rosette DELTA T1 (optional DELTA T4 class 4)

OUTSIDE INSIDE

Cylinder DELTA JK with knob

Escutcheon OLIVIA

Handle OLIVIA

Cylinder DELTA JKZ

class 3

Opening limiter (optional)

Thermal transmittance:- Leaf without glazing

2 U [W/(m .K)] = 1,33d

- Leaf with glazing2 U [W/(m .K)] = od 1,39 do 1,75d

Acoustic insulation:R (C;C ) = 28 (-2;-4) dBw tr

PROFILE “P” PROFILE “PU” PROFILE “PD”, PDT“ “ PROFILE “PN”

PROFILE “PN” (optional only at size 80N)

PROFILE “PD”, PDT“ “ (optional)

PROFILE “P” (standard)

PROFILE “PU” (optional)

Level “0” of floor

Level “0” of concrete base

Level “0” of floor

Level “0” of floor

Level “0” of floor

Level “0” of concrete base Level “0” of concrete base Level “0” of concrete base

Door width

Page 7: Delta doors 1/2013

Steel reinforced doors DELTA SPECIAL’2 can be applied as Internal or External entrance doors for offices, industrial premises, housing etc. Certificate ITT acc. to EN 14351-1+A1:2010 includes possibility to install different type of glazing. Leaf – single rebate type, 56mm thick, made of galvanized steel sheet 0.5mm covered by PVC film with wood grain structure. Leaf is filled with board of self-extinguishing polyurethane foam and equipped with two mortise locks, three hinges and three hinge bolts. The main lock DELTA DD6H/Z - certified class 6 acc. to EN 12209:2005 – is operated by cylinder with gear type cam. Frame- made of 1,5mm galvanized steel covered by PVC film with wood grain structure, allows application of additional gasket-advised in case of installation as external entrance doors . Because doors are made of steel, in case of installation as external entrance doors we recommend to install a small roofing over the door, to prevent overheating from the sunshine. Water resistance class 5B EN-1027 applies only if installed as opened outward. Doors are offered as flat or with pressed patterns. For additional charge, we offer for this doors also: glazing, thresholds with gasket, opening limiter, cylinders in system keyed alike, electromechanical handles, also alternative door frame profiles: PU, PD or PN (only for size 80).

NEW! Available – door frame with thermal insulation insert (profile PDT), decorative panels, glazing with frames of Stainless Steel or aluminum, fanlights, fittings of Stainless Steel.

REMARK! Possibility to shorten: leaf flat: 14cm, leaf with pressed pattern: 8cm ; leaf with deep pressed patterns: 5cm

ALU OAKALUALU

6 | DELTA 2013 DELTA 2013 | 7

WHITE

COLORS AND PRESSED MOULDING PATTERNS

CONSTRUCTION

DIMENSIONS AND FRAME PROFILES

DOORS DELTA SPECIAL'2

DELTA SPECIAL'2 FLATDELTA SPECIAL'2 PRESSED LONDONDELTA SPECIAL'2 DEEP PRESSED GENOVA, PARMA, TRENTO, RAMA

- Threshold for profile P55, PU made of PCV, with gasket, color dark brown- Threshold for profile P55, PU made of PCV, with gasket, color: dark wood, golden oak- Threshold for profile P55, PU made of solid oak, with gasket- Threshold for profile PD150, PN150, PDT made of solid oak, with gasket- Threshold for profile P55, PU made of aluminum, with gasket- Threshold for profile PD150, PN150, PDT made of aluminum, with gasket- Open limiter- Electromechanical handle GZF with fingerprint system- Electromechanical handle GI 2324 operated by code or card- Frame profile PU- Frame profile PD150- Frame profile PN150 (A. only at size 80N)- Frame profile PDT 150

- Bottom drip profile - Bottom leaf closing profile - Security cylinder GD6 for main lock, certified class 6- Complete fitting from PREMIUM model- Knob handle KLARA or ANETA- Complete TAMARA fitting- Security cylinder GD6 for main lock with multi-key system, certified class 6- Handles, rosettes and escutcheons finished in AB (Antic Brass) color- Choice of glazing panels- Fanlights- Decorative panels for internal doors- Handles, rosettes and escutcheons made of stainless steel- Leaf shorten service

ACCESSORIES

Standard set consist of: door leaf 56mm thick, with two mortise locks- daily lock with 3 bolts, main lock 6 class with 5 bolts, steel frame to be assembled – profile P55, three hinges, three hinge bolts, handle OLIVIA with escutcheons and protective rosette, two cylinders, door viewer.

Self-extinguishing polystyrene board

Galvanized steel sheet 0.5mm covered by PVC film with wood structure

Steel ribs

Hinge bolts

Mortise lock class 6, with handle

Daily mortise lock, with knob

Bottom, closing profile of steel

Wood grain structure

GLA

ZING

- see

pa

ge 24-29

2038, 2053

2060, 2075

840, 870

962, 1000

1998

2020

87

39

17

CALVADOS

JASNY ORZECH

MAHOGANY

VENGE

GOLDEN OAK

DARK WALNUT

- ANTHRACITE GREY (A only at size 90E)

- WHITE (A only at size 90E)

- MAHOGANY (A only at size 90E)

- DARK WALNUT (A only at size 90E)

- VENGE (A only at size 90E)

- GOLDEN OAK (A only at size 90E)

- ANTHRACITE GREY (A only at size 90E)

- WHITE- CALVADOS (A only at size 80N)

- MAHOGANY- DARK WALNUT- VENGE- GOLDEN OAK

- CALVADOS (A only at size 80N)

- LIGHT WALNUT- MAHOGANY- GOLDEN OAK

- WHITE- CALVADOS (A only at size 80N)

- MAHOGANY- DARK WALNUT- VENGE- GOLDEN OAK

- MAHOGANY- DARK WALNUT- VENGE- GOLDEN OAK

- DARK WALNUT- GOLDEN OAK

ANTHRACITE GREY

nominal distance

STEEL REINFORCED DOORS , flat or pressed Certified class 2 according to European standards ENV 1627

FLATLONDON

PRESSED PATTERNGENOVA

DEEP PRESSED PATTERN

PARMA DEEP PRESSED

TRENTO DEEP PRESSED PATTERN

RAMADEEP PRESSED PATTERN

Door viewer

Protective rosette DELTA T1 (optional DELTA T4 class 4)

OUTSIDE INSIDE

Cylinder DELTA JK with knob

Escutcheon OLIVIA

Handle OLIVIA

Cylinder DELTA JKZ

class 3

Opening limiter (optional)

Thermal transmittance:- Leaf without glazing

2 U [W/(m .K)] = 1,33d

- Leaf with glazing2 U [W/(m .K)] = od 1,39 do 1,75d

Acoustic insulation:R (C;C ) = 28 (-2;-4) dBw tr

PROFILE “P” PROFILE “PU” PROFILE “PD”, PDT“ “ PROFILE “PN”

PROFILE “PN” (optional only at size 80N)

PROFILE “PD”, PDT“ “ (optional)

PROFILE “P” (standard)

PROFILE “PU” (optional)

Level “0” of floor

Level “0” of concrete base

Level “0” of floor

Level “0” of floor

Level “0” of floor

Level “0” of concrete base Level “0” of concrete base Level “0” of concrete base

Door width

Page 8: Delta doors 1/2013

Steel anti-burglary doors DELTA PREMIUM can be applied as Internal or External entrance doors for offices, industrial premises, housing etc. Certificate ITT acc. to EN 14351-1+A1:2010 includes possibility to install different type of glazing. . Leaf – single rebate type, 56mm thick, made of galvanized steel sheet 0.7mm covered by PVC film with wood grain structure. Leaf is filled with board of self-extinguishing polyurethane foam and equipped with system lock and additional daily lock, three hinges and three hinge bolts. System lock: 9 movable rounded bolts, controlled by main lock DD6H/Z ( certified class 6 acc. to EN 12209: :2005) which is operated by cylinder GD6 –(certified class 6 acc. to EN-1303:2007) covered by T4 protective rosette (certified class 4 EN 1906:2003).Frame- made of 1,5mm galvanized steel covered by PVC film with wood grain structure, allows application of additional gasket-advised in case of installation as external entrance doors . . Because doors are made of steel, in case of installation as external entrance doors we recommend to install a small roofing over the door, to prevent overheating from the sunshine. Water resistance class 5B EN-1027 applies only if installed as opened outward. Doors are offered as flat or with pressed patterns. For additional charge, we offer for this doors also: glazing, thresholds with gasket, opening limiter, cylinders in system keyed alike, electromechanical handles , also alternative door frame profiles: PU, PD, PDT or PN (only for size 80).

NEW! Available – door frame with thermal insulation insert (profile PDT), decorative panels, glazing with frames of Stainless Steel or aluminum, fanlights, fittings of Stainless Steel

REMARK! Possibility to shorten: leaf flat: 8cm, leaf with pressed pattern: 8cm ; leaf with deep pressed patterns: 5cm

WHITE

CALVADOS

LIGHT WALNUT

MAHOGANY

VENGE

GOLDEN OAK

DARK WALNUT

COLORS AND PRESSED MOULDING PATTERNS

DIMENSIONS AND FRAME PROFILES

DOORS DELTA PREMIUM

DELTA PREMIUM FLATDELTA PREMIUM PRESSED LONDONDELTA PREMIUM DEEP PRESSED GENOVA, PARMA, TRENTODELTA PREMIUM 100E FLATDELTA PREMIUM 100E PRESSED RAMA

- Threshold for profile P55, PU made of PCV, with gasket, color dark brown- Threshold for profile P55, PU made of PCV, with gasket, color: dark wood, golden oak- Threshold for profile P55, PU made of solid oak, with gasket- Threshold for profile PD150, PN150, PDT made of solid oak, with gasket- Threshold for profile P55, PU made of aluminum, with gasket- Threshold for profile PD150, PN150, PDT made of aluminum, with gasket- Open limiter- Electromechanical handle GZF with fingerprint system- Electromechanical handle GI 2324 operated by code or card- Frame profile PU- Frame profile PD150- Frame profile PN150 (A. only at size 80N)- Frame profile PDT 150

- Bottom drip profile - Bottom leaf closing profile - Security cylinder GD6 for main lock, certified class 6- Complete fitting from PREMIUM model- Knob handle KLARA or ANETA- Complete TAMARA fitting- Security cylinder GD6 for main lock with multi-key system, certified class 6- Handles, rosettes and escutcheons finished in AB (Antic Brass) color- Choice of glazing panels- Fanlights- Decorative panels for internal doors- Handles, rosettes and escutcheons made of stainless steel- Leaf shorten service

ACCESSORIES

Standard set consist of: door leaf 56mm thick, locksystem(main lock class 6), with 9 blocking points and daily lock with 3 bolts, steel frame to be assembled – profile P55, three hinges, three hinge bolts, handle CARMEN, with escutcheons and protective rosette, two cylinders, door viewer.

PREMIUM

STEEL ANTI-BURGLARY DOORS , flat or pressed Certified class 3 according to European standards ENV 1627

TRENTO DEEP PRESSED PATTERN

Self-extinguishing polystyrene board

Galvanized steel sheet 0.7mm covered by PVC film with wood structure

Steel ribs

Mortise main lock class 6, with handle

Daily mortise lock, with knob

Support lock

Lock system blocking points

Hinge bolts

Bottom, closing profile of steel

Security cylinder GD6, certified class 6

Wood grain structure

8 | DELTA 2013 DELTA 2013 | 9

GLA

ZING

- see

pa

ge 24-29

ALU DĄBALUALU

K

K

K

ANTHRACITE GREY

87

39

17

- ANTHRACITE GREY- CALVADOS- MAHOGANY (A also at size 100E)

- DARK WALNUT (A also at size 100E)

- VENGE- GOLDEN OAK (A also at size 100E)

- WHITE- CALVADOS- MAHOGANY- DARK WALNUT- VENGE- GOLDEN OAK

- DARK WALNUT- GOLDEN OAK

- ANTHRACITE GREY- DARK WALNUT- VENGE- GOLDEN OAK

RAMA PRESSED PATTERN

- MAHOGANY (A only at size 100E)

- DARK WALNUT (A only at size 100E)

- GOLDEN OAK (A only at size 100E)

- CALVADOS (A only at size 80N)

- LIGHT WALNUT- MAHOGANY- GOLDEN OAK

* Dimension 100E available only in Premium model FLAT version (mahogany, dark walnut, golden oak) and in RAMA pressed pattern (mahogany, dark walnut, golden oak)

2038, 2053

2060, 2075

100E* 2060, 2075

840, 870

962, 1000

1062, 1100

1998

2020

2020

PARMA DEEP PRESSED PATTERN

LONDON PRESSED PATTERN

GENOVA DEEP PRESSED PATTERN

FLAT

Door viewer

Protective rosette DELTA T4, class 4

OUTSIDE INSIDE

Cylinder DELTA JK with knob

Escutcheon CARMEN

Handle CARMEN

Certified cylinder

DELTA GD6

Opening limiter (optional)

CONSTRUCTION

Thermal transmittance:- Leaf without glazing

2 U [W/(m .K)] = 1,4d

- Leaf with glazing2 U [W/(m .K)] = od 1,41 do 1,76d

Acoustic insulation:R (C;C ) = 28 (-2;-4) dBw tr

PROFILE “P” PROFILE “PU” PROFILE “PD”, PDT“ “ PROFILE “PN”

PROFILE “PN” (optional only at size 80N)

PROFILE “PD”, PDT“ “ (optional)

PROFILE “P” (standard)

PROFILE “PU” (optional)

Level “0” of floor

Level “0” of concrete baseLevel “0” of concrete baseLevel “0” of concrete baseLevel “0” of concrete base

Level “0” of floor

Level “0” of floor

Level “0” of floor

Door width

nominal distance

Page 9: Delta doors 1/2013

Steel anti-burglary doors DELTA PREMIUM can be applied as Internal or External entrance doors for offices, industrial premises, housing etc. Certificate ITT acc. to EN 14351-1+A1:2010 includes possibility to install different type of glazing. . Leaf – single rebate type, 56mm thick, made of galvanized steel sheet 0.7mm covered by PVC film with wood grain structure. Leaf is filled with board of self-extinguishing polyurethane foam and equipped with system lock and additional daily lock, three hinges and three hinge bolts. System lock: 9 movable rounded bolts, controlled by main lock DD6H/Z ( certified class 6 acc. to EN 12209: :2005) which is operated by cylinder GD6 –(certified class 6 acc. to EN-1303:2007) covered by T4 protective rosette (certified class 4 EN 1906:2003).Frame- made of 1,5mm galvanized steel covered by PVC film with wood grain structure, allows application of additional gasket-advised in case of installation as external entrance doors . . Because doors are made of steel, in case of installation as external entrance doors we recommend to install a small roofing over the door, to prevent overheating from the sunshine. Water resistance class 5B EN-1027 applies only if installed as opened outward. Doors are offered as flat or with pressed patterns. For additional charge, we offer for this doors also: glazing, thresholds with gasket, opening limiter, cylinders in system keyed alike, electromechanical handles , also alternative door frame profiles: PU, PD, PDT or PN (only for size 80).

NEW! Available – door frame with thermal insulation insert (profile PDT), decorative panels, glazing with frames of Stainless Steel or aluminum, fanlights, fittings of Stainless Steel

REMARK! Possibility to shorten: leaf flat: 8cm, leaf with pressed pattern: 8cm ; leaf with deep pressed patterns: 5cm

WHITE

CALVADOS

LIGHT WALNUT

MAHOGANY

VENGE

GOLDEN OAK

DARK WALNUT

COLORS AND PRESSED MOULDING PATTERNS

DIMENSIONS AND FRAME PROFILES

DOORS DELTA PREMIUM

DELTA PREMIUM FLATDELTA PREMIUM PRESSED LONDONDELTA PREMIUM DEEP PRESSED GENOVA, PARMA, TRENTODELTA PREMIUM 100E FLATDELTA PREMIUM 100E PRESSED RAMA

- Threshold for profile P55, PU made of PCV, with gasket, color dark brown- Threshold for profile P55, PU made of PCV, with gasket, color: dark wood, golden oak- Threshold for profile P55, PU made of solid oak, with gasket- Threshold for profile PD150, PN150, PDT made of solid oak, with gasket- Threshold for profile P55, PU made of aluminum, with gasket- Threshold for profile PD150, PN150, PDT made of aluminum, with gasket- Open limiter- Electromechanical handle GZF with fingerprint system- Electromechanical handle GI 2324 operated by code or card- Frame profile PU- Frame profile PD150- Frame profile PN150 (A. only at size 80N)- Frame profile PDT 150

- Bottom drip profile - Bottom leaf closing profile - Security cylinder GD6 for main lock, certified class 6- Complete fitting from PREMIUM model- Knob handle KLARA or ANETA- Complete TAMARA fitting- Security cylinder GD6 for main lock with multi-key system, certified class 6- Handles, rosettes and escutcheons finished in AB (Antic Brass) color- Choice of glazing panels- Fanlights- Decorative panels for internal doors- Handles, rosettes and escutcheons made of stainless steel- Leaf shorten service

ACCESSORIES

Standard set consist of: door leaf 56mm thick, locksystem(main lock class 6), with 9 blocking points and daily lock with 3 bolts, steel frame to be assembled – profile P55, three hinges, three hinge bolts, handle CARMEN, with escutcheons and protective rosette, two cylinders, door viewer.

PREMIUM

STEEL ANTI-BURGLARY DOORS , flat or pressed Certified class 3 according to European standards ENV 1627

TRENTO DEEP PRESSED PATTERN

Self-extinguishing polystyrene board

Galvanized steel sheet 0.7mm covered by PVC film with wood structure

Steel ribs

Mortise main lock class 6, with handle

Daily mortise lock, with knob

Support lock

Lock system blocking points

Hinge bolts

Bottom, closing profile of steel

Security cylinder GD6, certified class 6

Wood grain structure

8 | DELTA 2013 DELTA 2013 | 9

GLA

ZING

- see

pa

ge 24-29

ALU DĄBALUALU

K

K

K

ANTHRACITE GREY

87

39

17

- ANTHRACITE GREY- CALVADOS- MAHOGANY (A also at size 100E)

- DARK WALNUT (A also at size 100E)

- VENGE- GOLDEN OAK (A also at size 100E)

- WHITE- CALVADOS- MAHOGANY- DARK WALNUT- VENGE- GOLDEN OAK

- DARK WALNUT- GOLDEN OAK

- ANTHRACITE GREY- DARK WALNUT- VENGE- GOLDEN OAK

RAMA PRESSED PATTERN

- MAHOGANY (A only at size 100E)

- DARK WALNUT (A only at size 100E)

- GOLDEN OAK (A only at size 100E)

- CALVADOS (A only at size 80N)

- LIGHT WALNUT- MAHOGANY- GOLDEN OAK

* Dimension 100E available only in Premium model FLAT version (mahogany, dark walnut, golden oak) and in RAMA pressed pattern (mahogany, dark walnut, golden oak)

2038, 2053

2060, 2075

100E* 2060, 2075

840, 870

962, 1000

1062, 1100

1998

2020

2020

PARMA DEEP PRESSED PATTERN

LONDON PRESSED PATTERN

GENOVA DEEP PRESSED PATTERN

FLAT

Door viewer

Protective rosette DELTA T4, class 4

OUTSIDE INSIDE

Cylinder DELTA JK with knob

Escutcheon CARMEN

Handle CARMEN

Certified cylinder

DELTA GD6

Opening limiter (optional)

CONSTRUCTION

Thermal transmittance:- Leaf without glazing

2 U [W/(m .K)] = 1,4d

- Leaf with glazing2 U [W/(m .K)] = od 1,41 do 1,76d

Acoustic insulation:R (C;C ) = 28 (-2;-4) dBw tr

PROFILE “P” PROFILE “PU” PROFILE “PD”, PDT“ “ PROFILE “PN”

PROFILE “PN” (optional only at size 80N)

PROFILE “PD”, PDT“ “ (optional)

PROFILE “P” (standard)

PROFILE “PU” (optional)

Level “0” of floor

Level “0” of concrete baseLevel “0” of concrete baseLevel “0” of concrete baseLevel “0” of concrete base

Level “0” of floor

Level “0” of floor

Level “0” of floor

Door width

nominal distance

Page 10: Delta doors 1/2013

Self-extinguishing polystyrene board

Galvanized steel sheet 0.7mm covered by PVC film with wood structure

Steel ribs

Hardened rods

Mortise main lock class 6, with handle

Daily mortise lock, with knob

Support lock

Lock system blocking points

Hinge bolts

Bottom, closing profile of steel

Security cylinder GD6, certified class 6

Wood grain structure

Steel anti-burglary doors DELTA DE LUXE’2 can be applied as Internal or External entrance doors for offices, industrial premises, housing etc. Certificate ITT acc. to EN 14351-1+A1:2010. Leaf – single rebate type, 56mm thick, made of galvanized steel sheet 0.7mm covered by PVC film with wood grain structure. Leaf is filled with board of self-extinguishing polyurethane foam and equipped with system lock and additional daily lock, three hinges and three hinge bolts. System lock: 9 movable rounded bolts, controlled by main lock DD6H/Z ( certified class 6 acc. to EN 12209: :2005) which is operated by cylinder GD6 –(certified class 6 acc. to EN-1303:2007) covered by T4 protective rosette (certified class 4 EN 1906:2003).Frame- made of 1,5mm galvanized steel covered by PVC film with wood grain structure, allows application of additional gasket- advised in case of installation as external entrance doors . Because doors are made of steel, in case of installation as external entrance doors we recommend to install a small roofing over the door, to prevent overheating from the sunshine. Water resistance class 5B EN-1027 applies only if installed as opened outward. Doors are offered as flat or with pressed pattern Londyn. For additional charge, we offer for this doors also: glazing, thresholds with gasket, opening limiter, cylinders in system keyed alike, door fittings in AB color, electromechanical handles, also alternative door frame profiles: PU, PD, or PN (only for size 80).

NEW! Available – door frame with thermal insulation insert (profile PDT), decorative panels, fittings of Stainless Steel.

REMARK! Possibility to shorten: leaf flat: 8cm, leaf with pressed pattern: 8cm.

WHITE

DOORS DELTA DE LUXE’2

DELTA DE LUXE'2 FLATDELTA DE LUXE'2 PRESSED LONDON

- Threshold for profile P55, PU made of PCV, with gasket, color dark brown- Threshold for profile P55, PU made of PCV, with gasket, color: dark wood, golden oak- Threshold for profile P55, PU made of solid oak, with gasket- Threshold for profile PD150, PN150, PDT made of solid oak, with gasket- Threshold for profile P55, PU made of aluminum, with gasket- Threshold for profile PD150, PN150, PDT made of aluminum, with gasket- Open limiter- Frame profile PU- Frame profile PD150- Frame profile PN150 (A. only at size 80N)- Frame profile PDT 150

- Bottom drip profile - Bottom leaf closing profile - Knob handle KLARA or ANETA- Security cylinder GD6 for main lock with multi-key system, certified class 6- Handles, rosettes and escutcheons finished in AB (Antic Brass) color- Electromechanical handle GZF with fingerprint system- Electromechanical handle GI 2324 operated by code or card- Handles, rosettes and escutcheons made of stainless steel- Decorative panels for internal doors- Leaf shorten service

ACCESSORIES

Standard set consist of: door leaf 56mm thick, lock system(main lock class 6), with 9 blocking points and daily lock with 3 bolts, steel frame to be assembled – profile P55, three hinges, three hinge bolts, handle VENUS, with escutcheons and protective rosette, two cylinders, door viewer.

DE LUXE’2

STEEL ANTI-BURGLARY DOORS , flat or pressed Certified class 3 according to European standards ENV 1627:2006

10 | DELTA 2013 DELTA 2013 | 11

ALU OAKALUALU

2038, 2053

2060, 2075

840, 870

962, 1000

1998

2020

L

L

87

39

17

MAHOGANY

GOLDEN OAK

DARK WALNUT

- WHITE- MAHOGANY- DARK WALNUT- GOLDEN OAK

- WHITE- MAHOGANY- GOLDEN OAK

COLORS AND PRESSED MOULDING PATTERNS

FLAT

LONDON PRESSED PATTERN

Door viewer

Protective rosette DELTA T4/L, class 4

OUTSIDE INSIDE

Cylinder DELTA JK, with knob

Escutcheon CARMEN

Handle VENUS

Certified cylinder

DELTA GD6

Opening limiter (optional)

CONSTRUCTION

Thermal transmittance:2U [W/(m .K)] = 1,45d

Acoustic insulation:R (C;C ) = 29 (-2;-4) dBw tr

DIMENSIONS AND FRAME PROFILES

PROFILE “P” PROFILE “PU” PROFILE “PD”, PDT“ “ PROFILE “PN”

PROFILE “PN” (optional only at size 80N)

PROFILE “PD”, PDT“ “ (optional)

PROFILE “P” (standard)

PROFILE “PU” (optional)

Level “0” of floor

Level “0” of concrete base Level “0” of concrete base Level “0” of concrete base Level “0” of concrete base

Level “0” of floor

Level “0” of floor

Level “0” of floor

Door width

nominal distance

Page 11: Delta doors 1/2013

Self-extinguishing polystyrene board

Galvanized steel sheet 0.7mm covered by PVC film with wood structure

Steel ribs

Hardened rods

Mortise main lock class 6, with handle

Daily mortise lock, with knob

Support lock

Lock system blocking points

Hinge bolts

Bottom, closing profile of steel

Security cylinder GD6, certified class 6

Wood grain structure

Steel anti-burglary doors DELTA DE LUXE’2 can be applied as Internal or External entrance doors for offices, industrial premises, housing etc. Certificate ITT acc. to EN 14351-1+A1:2010. Leaf – single rebate type, 56mm thick, made of galvanized steel sheet 0.7mm covered by PVC film with wood grain structure. Leaf is filled with board of self-extinguishing polyurethane foam and equipped with system lock and additional daily lock, three hinges and three hinge bolts. System lock: 9 movable rounded bolts, controlled by main lock DD6H/Z ( certified class 6 acc. to EN 12209: :2005) which is operated by cylinder GD6 –(certified class 6 acc. to EN-1303:2007) covered by T4 protective rosette (certified class 4 EN 1906:2003).Frame- made of 1,5mm galvanized steel covered by PVC film with wood grain structure, allows application of additional gasket- advised in case of installation as external entrance doors . Because doors are made of steel, in case of installation as external entrance doors we recommend to install a small roofing over the door, to prevent overheating from the sunshine. Water resistance class 5B EN-1027 applies only if installed as opened outward. Doors are offered as flat or with pressed pattern Londyn. For additional charge, we offer for this doors also: glazing, thresholds with gasket, opening limiter, cylinders in system keyed alike, door fittings in AB color, electromechanical handles, also alternative door frame profiles: PU, PD, or PN (only for size 80).

NEW! Available – door frame with thermal insulation insert (profile PDT), decorative panels, fittings of Stainless Steel.

REMARK! Possibility to shorten: leaf flat: 8cm, leaf with pressed pattern: 8cm.

WHITE

DOORS DELTA DE LUXE’2

DELTA DE LUXE'2 FLATDELTA DE LUXE'2 PRESSED LONDON

- Threshold for profile P55, PU made of PCV, with gasket, color dark brown- Threshold for profile P55, PU made of PCV, with gasket, color: dark wood, golden oak- Threshold for profile P55, PU made of solid oak, with gasket- Threshold for profile PD150, PN150, PDT made of solid oak, with gasket- Threshold for profile P55, PU made of aluminum, with gasket- Threshold for profile PD150, PN150, PDT made of aluminum, with gasket- Open limiter- Frame profile PU- Frame profile PD150- Frame profile PN150 (A. only at size 80N)- Frame profile PDT 150

- Bottom drip profile - Bottom leaf closing profile - Knob handle KLARA or ANETA- Security cylinder GD6 for main lock with multi-key system, certified class 6- Handles, rosettes and escutcheons finished in AB (Antic Brass) color- Electromechanical handle GZF with fingerprint system- Electromechanical handle GI 2324 operated by code or card- Handles, rosettes and escutcheons made of stainless steel- Decorative panels for internal doors- Leaf shorten service

ACCESSORIES

Standard set consist of: door leaf 56mm thick, lock system(main lock class 6), with 9 blocking points and daily lock with 3 bolts, steel frame to be assembled – profile P55, three hinges, three hinge bolts, handle VENUS, with escutcheons and protective rosette, two cylinders, door viewer.

DE LUXE’2

STEEL ANTI-BURGLARY DOORS , flat or pressed Certified class 3 according to European standards ENV 1627:2006

10 | DELTA 2013 DELTA 2013 | 11

ALU OAKALUALU

2038, 2053

2060, 2075

840, 870

962, 1000

1998

2020

L

L

87

39

17

MAHOGANY

GOLDEN OAK

DARK WALNUT

- WHITE- MAHOGANY- DARK WALNUT- GOLDEN OAK

- WHITE- MAHOGANY- GOLDEN OAK

COLORS AND PRESSED MOULDING PATTERNS

FLAT

LONDON PRESSED PATTERN

Door viewer

Protective rosette DELTA T4/L, class 4

OUTSIDE INSIDE

Cylinder DELTA JK, with knob

Escutcheon CARMEN

Handle VENUS

Certified cylinder

DELTA GD6

Opening limiter (optional)

CONSTRUCTION

Thermal transmittance:2U [W/(m .K)] = 1,45d

Acoustic insulation:R (C;C ) = 29 (-2;-4) dBw tr

DIMENSIONS AND FRAME PROFILES

PROFILE “P” PROFILE “PU” PROFILE “PD”, PDT“ “ PROFILE “PN”

PROFILE “PN” (optional only at size 80N)

PROFILE “PD”, PDT“ “ (optional)

PROFILE “P” (standard)

PROFILE “PU” (optional)

Level “0” of floor

Level “0” of concrete base Level “0” of concrete base Level “0” of concrete base Level “0” of concrete base

Level “0” of floor

Level “0” of floor

Level “0” of floor

Door width

nominal distance

Page 12: Delta doors 1/2013

12 | DELTA 2013 DELTA 2013 | 13

DOORS DELTA ROYAL

- Threshold made of solid oak, profile Royal1, with gasket (35mm high)- Threshold made of Aluminum/PVC, profile Royal1, with gasket (30mm high)- Threshold made of Aluminum/PVC, profile Royal2, with gasket (25mm high)- Frame profile PMT with thermal barrier- Stainless steel door handrail with TAMARA`2 INOX handle- Stainless steel handles: Carmen, Olivia or TAMARA`2- Bottom drip profile

- Security cylinder GD6, with multi-key system, certified class 6- Glazing with frames of stainless steel or aluminum- Leaf shorten services to 30mm- Bottom leaf closing profile - Electromechanical handle GZF with fingerprint system- Electromechanical handle GI 2324 operated by code or card

ACCESSORIES

Standard set consist of: door leaf 84mm thick, lock system, with 7 blocking points and daily lock with 2 bolts, steel frame to be assembled – profile PM, three adjustable hinges, 6 hinge bolts, handle VENUS INOX, with stainless steel escutcheons and protective rosette, two cylinders, door viewer.

ROYAL

2020, 2050

2050, 2090

2050, 2090

860, 900

960, 1000

1000, 1040

1975

2005

2005

ANTHRACITE GREY

VENGE

GOLDEN OAK

DARK WALNUT

• Increased Thermal insurance ROYAL 84S- Triple sealing - PMT 150 door frame with thermal barrier, for the external entrance doors

• Hinges adjustable in 3 directions • 3 type of thresholds • Glazing with frames of stainless steel

G1G

OAK

905 922 982

780

880

842

942

2040

2010

2040

1995

Threshold made of Aluminum/PVC, profile Royal2**

Threshold made of Aluminum/PVC, profile Royal1

Threshold made of solid oak, profile Royal1

762

862

1965

1995

L

L

L

L

M

M

M

MNEW!!! ON SALE!

62

STEEL ANTI-BURGLARY DOORS, OF HIGH SOUND AND THERMAL INSULATION

2- version Royal 84AW certified class 4 according to European standards ENV 1627:2006, Rw(C;Ctr)=42 (-2; -5) dB, Ud[W/(m .K)]=1,19 2- version Royal 84WKW certified class 3 according to European standards ENV 1627:2006, Rw(C;Ctr) = 30 (-4; -6 ) dB, Ud[W/(m .K)] = 0,99*

2- version Royal 84S certified class 3 according to European standards ENV 1627:2006, Rw(C;Ctr) = 30 (-4; -6 ) dB, Ud[W/(m .K)]=1,1-1,4

* Doors 90E without glazing with PMT150 frame profile

L

L

L

M

M

M

23

90N

ROYAL DELTA door can be shortened only to 30mm (included rebate). It is recommended to order shortened door directly from the manufacturer. Experienced install team can shorten the door on their own, after reading the shortening instructions, respecting the precautions of the instructions and installing the closing profile of bottom of the door leaf. It should be noted that shortening leafs should be the last option, wherever it is not possible to prepare sufficiently high space. Door leaf shortening is not recommended by the manufacturer, as this may decrease the functional parameters ofthe door.

Royal 84S Royal 84WKW

PROFILE "PMT" (optional)PROFILE "PM"

5

**Threshold ALU/ PVC profile Royal2 is apply where the door are

exposed directly to the precipitation and are open to inside of the

protected space.

84 mm

42 dB

0,99 Ud

C

knc ei sh sT

insci ut ls au tio oc nA

anr st m la ittm ar ne ch eT

y ct le af sa sS

THRESHOLDS TYPES

• Increased resistance to burglary- Multi point lock based on DELTA DF18Z 6 class mortise lock, with 7 blocking points with Ø18mm bolts- DELTA DF18D daily lock- Security cylinder GD6, certified class 6

• ROYAL 84WKW• Stainless steel fittings, class 4

Increased Acoustic insurance

GLA

ZIN

G - se

e p

ag

e 27-29

COLORS AND PRESSED MOULDING PATTERNS

- ANTHRACITE GREY- DARK WALNUT- VENGE- GOLDEN OAK

REMARK!!! DELTA ROYAL 84WKW doors have just passed fire test for EI60 rate.

FLAT

Door viewer

Protective rosette DELTA T4/L INOX

OUTSIDE INSIDE

Certified cylinder DELTA GD6, with knob

Protective rosette DELTA T4 INOX

Handle VENUS

Certified cylinder

DELTA GD6

CONSTRUCTION

Self-extinguishing polystyrene foam (84S), Panel DELTA WKW (84WKW)

Galvanized steel sheet 0.7mm covered by PVC film with wood structure

Hardened rods (only in 84WKW version)

Main handle lock DELTA DF18Z with Ø18 mm bolts

DELTA DF18D additional daily lock with a knob

Daily mortise lock, with knob

Support lock

Bottom rebate with gasket

Security cylinder GD6, certified class 6

Wooden frame

Rod of the lock system

Hinges adjustable in 3 directions

Thermal barrier around the door leaf made of 1.5 mm steel

DIMENSIONS AND FRAME PROFILES

Level “0” of floor

Level “0” of concrete base

Door width nominal distance

Page 13: Delta doors 1/2013

12 | DELTA 2013 DELTA 2013 | 13

DOORS DELTA ROYAL

- Threshold made of solid oak, profile Royal1, with gasket (35mm high)- Threshold made of Aluminum/PVC, profile Royal1, with gasket (30mm high)- Threshold made of Aluminum/PVC, profile Royal2, with gasket (25mm high)- Frame profile PMT with thermal barrier- Stainless steel door handrail with TAMARA`2 INOX handle- Stainless steel handles: Carmen, Olivia or TAMARA`2- Bottom drip profile

- Security cylinder GD6, with multi-key system, certified class 6- Glazing with frames of stainless steel or aluminum- Leaf shorten services to 30mm- Bottom leaf closing profile - Electromechanical handle GZF with fingerprint system- Electromechanical handle GI 2324 operated by code or card

ACCESSORIES

Standard set consist of: door leaf 84mm thick, lock system, with 7 blocking points and daily lock with 2 bolts, steel frame to be assembled – profile PM, three adjustable hinges, 6 hinge bolts, handle VENUS INOX, with stainless steel escutcheons and protective rosette, two cylinders, door viewer.

ROYAL

2020, 2050

2050, 2090

2050, 2090

860, 900

960, 1000

1000, 1040

1975

2005

2005

ANTHRACITE GREY

VENGE

GOLDEN OAK

DARK WALNUT

• Increased Thermal insurance ROYAL 84S- Triple sealing - PMT 150 door frame with thermal barrier, for the external entrance doors

• Hinges adjustable in 3 directions • 3 type of thresholds • Glazing with frames of stainless steel

G1G

OAK

905 922 982

780

880

842

942

2040

2010

2040

1995

Threshold made of Aluminum/PVC, profile Royal2**

Threshold made of Aluminum/PVC, profile Royal1

Threshold made of solid oak, profile Royal1

762

862

1965

1995

L

L

L

L

M

M

M

MNEW!!! ON SALE!

62

STEEL ANTI-BURGLARY DOORS, OF HIGH SOUND AND THERMAL INSULATION

2- version Royal 84AW certified class 4 according to European standards ENV 1627:2006, Rw(C;Ctr)=42 (-2; -5) dB, Ud[W/(m .K)]=1,19 2- version Royal 84WKW certified class 3 according to European standards ENV 1627:2006, Rw(C;Ctr) = 30 (-4; -6 ) dB, Ud[W/(m .K)] = 0,99*

2- version Royal 84S certified class 3 according to European standards ENV 1627:2006, Rw(C;Ctr) = 30 (-4; -6 ) dB, Ud[W/(m .K)]=1,1-1,4

* Doors 90E without glazing with PMT150 frame profile

L

L

L

M

M

M

23

90N

ROYAL DELTA door can be shortened only to 30mm (included rebate). It is recommended to order shortened door directly from the manufacturer. Experienced install team can shorten the door on their own, after reading the shortening instructions, respecting the precautions of the instructions and installing the closing profile of bottom of the door leaf. It should be noted that shortening leafs should be the last option, wherever it is not possible to prepare sufficiently high space. Door leaf shortening is not recommended by the manufacturer, as this may decrease the functional parameters ofthe door.

Royal 84S Royal 84WKW

PROFILE "PMT" (optional)PROFILE "PM"5

**Threshold ALU/ PVC profile Royal2 is apply where the door are

exposed directly to the precipitation and are open to inside of the

protected space.

84 mm

42 dB

0,99 Ud

C

knc ei sh sT

insci ut ls au tio oc nA

anr st m la ittm ar ne ch eT

y ct le af sa sS

THRESHOLDS TYPES

• Increased resistance to burglary- Multi point lock based on DELTA DF18Z 6 class mortise lock, with 7 blocking points with Ø18mm bolts- DELTA DF18D daily lock- Security cylinder GD6, certified class 6

• ROYAL 84WKW• Stainless steel fittings, class 4

Increased Acoustic insurance

GLA

ZIN

G - se

e p

ag

e 27-29

COLORS AND PRESSED MOULDING PATTERNS

- ANTHRACITE GREY- DARK WALNUT- VENGE- GOLDEN OAK

REMARK!!! DELTA ROYAL 84WKW doors have just passed fire test for EI60 rate.

FLAT

Door viewer

Protective rosette DELTA T4/L INOX

OUTSIDE INSIDE

Certified cylinder DELTA GD6, with knob

Protective rosette DELTA T4 INOX

Handle VENUS

Certified cylinder

DELTA GD6

CONSTRUCTION

Self-extinguishing polystyrene foam (84S), Panel DELTA WKW (84WKW)

Galvanized steel sheet 0.7mm covered by PVC film with wood structure

Hardened rods (only in 84WKW version)

Main handle lock DELTA DF18Z with Ø18 mm bolts

DELTA DF18D additional daily lock with a knob

Daily mortise lock, with knob

Support lock

Bottom rebate with gasket

Security cylinder GD6, certified class 6

Wooden frame

Rod of the lock system

Hinges adjustable in 3 directions

Thermal barrier around the door leaf made of 1.5 mm steel

DIMENSIONS AND FRAME PROFILES

Level “0” of floor

Level “0” of concrete base

Door width nominal distance

Page 14: Delta doors 1/2013

Steel doors of increased thermal insulation DELTA MAXIM are designated for offices, industrial premises, housing etc. Certificate ITT acc. to EN 14351-1+A1:2010 includes possibility to install different type of glazing. Thermal transmittance for the doors with self-extinguishing polystyrene board (EPS) without glazing is Ud[W/(m .K)]=1,0 but doors with glazing increase Ud[W/(m .K)] ≥1,3Thermal transmittance for the doors with polyurethane foam (PUR) without glazing is Ud[W/(m .K)]=0,8 but doors with glazing increase Ud[W/(m .K)] ≥1,1. Leaf – single rebate type, 68mm thick, made of galvanized steel sheet 0.5mm covered by PVC film with wood grain structure. Leaf is filled with board of self-extinguishing polystyrene board (EPS) or polyurethane foam (PUR) and equipped with two mortise locks, three hinges and hinge bolts. The main lock DELTA DD6H/Z - certified class 6 acc. to EN 12209:2005 – is operated by cylinder with gear type cam. Hinges can be adjusted along 3 axes. Frame- made of 1,5mm galvanized steel covered by PVC film with wood grain structure and installed gasket. As alternate, for additional fee, there is available another type of frame with gasket: made of solid wood covered by sheet of aluminum with PVC film with wood grain structure. Because doors are made of steel, in case of installation as external entrance doors we recommend to install a small roofing over the door, to prevent overheating from the sunshine. These doors are installed with a threshold of special construction, made of PVC and aluminum to ensure high insulation. Doors are offered as flat or with deep pressed pattern RAMA.

For additional charge, we offer for this doors also: glazing, wooden frame, cylinders in system keyed alike, fittings of Stainless Steel .

REMARK! This doors cannot be shortened.

WHITE

COLORS AND PRESSED MOULDING PATTERNS

DOORS DELTA MAXIM

DELTA MAXIM 90E FLATDELTA MAXIM 90E DEEP PRESSED RAMA

- Knob handle KLARA or ANETA- Glazing with frames of stainless steel or aluminum- Security cylinder GD6, with multi-key system, certified class 6- Stainless steel handles: TAMARA`2 INOX- Stainless steel door handrail with TAMARA`2 INOX handle

ACCESSORIES

Standard set consist of: door leaf 68mm thick, with two mortise locks- daily lock with 3 bolts, main lock 6 class with 5 bolts, wooden/aluminum door frame, three adjustable hinges, three hinge bolts, handle OLIVIA INOX with stainless steel escutcheons and protective rosette, two cylinders, door viewer, threshold aluminum/PVC.

Steel external entrance door of increased thermal insulation

14 | DELTA 2013 DELTA 2013 | 15

ANTHRACITE GREY

68 mm

knc ei sh sT

1,00 Ud

anr st m la ittm ar ne ch eT

90E 900 920 950 2023 2005 2035 1000 2070

available from spring 2013

MAXIM

GOLDEN OAK

DARK WALNUT

- ANTHRACITE GREY (A only at size 90E)

- WHITE (A only at size 90E)

- DARK WALNUT (A only at size 90E)

- GOLDEN OAK (A only at size 90E)

RAMADEEP PRESSED PATTERN

- ANTHRACITE GREY (A only at size 90E)

- WHITE (A only at size 90E)

- DARK WALNUT (A only at size 90E)

- GOLDEN OAK (A only at size 90E)

GLA

ZIN

G - se

e p

ag

e 27-29

Self-extinguishing polystyrene board or polyurethane foam

Galvanized steel sheet 0.5mm covered by PVC film with wood structure

Wooden frame

Mortise lock class 6, with handle

Daily mortise lock, with knob

Hinges adjustable in 3 directions

Hinge bolts

10

nominaldistance

20

G

PROFIL MAXIM "DM"

65

50

68

68mm

NEW!

FLAT

Door viewer

Protective rosette DELTA T1 (optional DELTA T4 class 4)

OUTSIDE INSIDE

Cylinder DELTA JK with knob

Escutcheon OLIVIA

Handle OLIVIA

Cylinder DELTA JKZ

class 3

Opening limiter (optional)

CONSTRUCTION

DIMENSIONS AND FRAME PROFILES

Level “0” of floorDoor width

Page 15: Delta doors 1/2013

Steel doors of increased thermal insulation DELTA MAXIM are designated for offices, industrial premises, housing etc. Certificate ITT acc. to EN 14351-1+A1:2010 includes possibility to install different type of glazing. Thermal transmittance for the doors with self-extinguishing polystyrene board (EPS) without glazing is Ud[W/(m .K)]=1,0 but doors with glazing increase Ud[W/(m .K)] ≥1,3Thermal transmittance for the doors with polyurethane foam (PUR) without glazing is Ud[W/(m .K)]=0,8 but doors with glazing increase Ud[W/(m .K)] ≥1,1. Leaf – single rebate type, 68mm thick, made of galvanized steel sheet 0.5mm covered by PVC film with wood grain structure. Leaf is filled with board of self-extinguishing polystyrene board (EPS) or polyurethane foam (PUR) and equipped with two mortise locks, three hinges and hinge bolts. The main lock DELTA DD6H/Z - certified class 6 acc. to EN 12209:2005 – is operated by cylinder with gear type cam. Hinges can be adjusted along 3 axes. Frame- made of 1,5mm galvanized steel covered by PVC film with wood grain structure and installed gasket. As alternate, for additional fee, there is available another type of frame with gasket: made of solid wood covered by sheet of aluminum with PVC film with wood grain structure. Because doors are made of steel, in case of installation as external entrance doors we recommend to install a small roofing over the door, to prevent overheating from the sunshine. These doors are installed with a threshold of special construction, made of PVC and aluminum to ensure high insulation. Doors are offered as flat or with deep pressed pattern RAMA.

For additional charge, we offer for this doors also: glazing, wooden frame, cylinders in system keyed alike, fittings of Stainless Steel .

REMARK! This doors cannot be shortened.

WHITE

COLORS AND PRESSED MOULDING PATTERNS

DOORS DELTA MAXIM

DELTA MAXIM 90E FLATDELTA MAXIM 90E DEEP PRESSED RAMA

- Knob handle KLARA or ANETA- Glazing with frames of stainless steel or aluminum- Security cylinder GD6, with multi-key system, certified class 6- Stainless steel handles: TAMARA`2 INOX- Stainless steel door handrail with TAMARA`2 INOX handle

ACCESSORIES

Standard set consist of: door leaf 68mm thick, with two mortise locks- daily lock with 3 bolts, main lock 6 class with 5 bolts, wooden/aluminum door frame, three adjustable hinges, three hinge bolts, handle OLIVIA INOX with stainless steel escutcheons and protective rosette, two cylinders, door viewer, threshold aluminum/PVC.

Steel external entrance door of increased thermal insulation

14 | DELTA 2013 DELTA 2013 | 15

ANTHRACITE GREY

68 mm

knc ei sh sT

1,00 Ud

anr st m la ittm ar ne ch eT

90E 900 920 950 2023 2005 2035 1000 2070

available from spring 2013

MAXIM

GOLDEN OAK

DARK WALNUT

- ANTHRACITE GREY (A only at size 90E)

- WHITE (A only at size 90E)

- DARK WALNUT (A only at size 90E)

- GOLDEN OAK (A only at size 90E)

RAMADEEP PRESSED PATTERN

- ANTHRACITE GREY (A only at size 90E)

- WHITE (A only at size 90E)

- DARK WALNUT (A only at size 90E)

- GOLDEN OAK (A only at size 90E)

GLA

ZIN

G - se

e p

ag

e 27-29

Self-extinguishing polystyrene board or polyurethane foam

Galvanized steel sheet 0.5mm covered by PVC film with wood structure

Wooden frame

Mortise lock class 6, with handle

Daily mortise lock, with knob

Hinges adjustable in 3 directions

Hinge bolts

10

nominaldistance

20

G

PROFIL MAXIM "DM"

65

50

68

68mm

NEW!

FLAT

Door viewer

Protective rosette DELTA T1 (optional DELTA T4 class 4)

OUTSIDE INSIDE

Cylinder DELTA JK with knob

Escutcheon OLIVIA

Handle OLIVIA

Cylinder DELTA JKZ

class 3

Opening limiter (optional)

CONSTRUCTION

DIMENSIONS AND FRAME PROFILES

Level “0” of floorDoor width

Page 16: Delta doors 1/2013

Passive doors DELTA PRESTIGE are designated for homes, offices, industrial premises, housing etc. Certificate ITT acc. to EN 14351-1+A1:2010 includes possibility to install different type of glazing. Thermal transmittance for the doors without glazing is Ud[W/(m .K)]=0,6 but doors with glazing increase Ud[W/(m .K)] ≥0,8.Leaf – double rebate type, 88mm thick, with two gaskets. Consist of internal frame made of solid wood with stabilizing profiles inside, filled with polyurethane foam (PUR) covered both side by MFP wooden panels. From the outside leaf is covered by HPL material - highly resistant for atmosphere conditions, scratches and damages. Doors are equipped with three hinges adjustable in 3 dimensions, and system lock driven by cylinder with gear type cam DELTA GD6. Frame is made of solid wood and covered with HPL material, and has additional gasket installed. Threshold is of a special construction PVC/aluminum to ensure high thermal insulation.

Doors are available only as flat. For additional charge, we offer for this doors also: glazing with INOX frames, fittings with AXA handle (as on photo above) .

REMARK! This doors cannot be shortened.

WHITE

CHOCOLATE OAK

COLORS AND PRESSED MOULDING PATTERNS

CONSTRUCTION

DIMENSIONS AND FRAME PROFILES

DOORS DELTA PRESTIGE

DELTA PRESTIGE 90N FLATDELTA PRESTIGE 90N FLAT BELT INOXDELTA PRESTIGE 90N FLAT LINEA'4 INOXDELTA PRESTIGE 100N FLATDELTA PRESTIGE 100N FLAT BELT INOXDELTA PRESTIGE 100N FLAT LINEA'4 INOX

- AXA handrail and handle- Knob handle KLARA or ANETA

ACCESSORIES

Standard set consist of: door leaf 88mm thick, with central lock system, wooden door frame, three adjustable hinges, three hinge bolts, handle TAMARA`2 INOX with stainless steel protective rosette DELTA T1, security cylinder DELTA GD6, certified class 6, door viewer, threshold aluminum/PVC.

PASSIVE external entrance door

16 | DELTA 2013 DELTA 2013 | 17

ANTHRACITE GREY

- ANTHRACITE GREY- WHITE- CHOCOLATE OAK

FLAT

88 mm

knc ei sh sT

0,60 Ud

anr st m la ittm ar ne ch eT

Door viewer

Handle TAMARA`2 INOX

Security cylinder GD6, class 6

Protective rosette DELTA T1

Optional AXA handrail and handle.

Polyurethane foam

MFP board

Safe Panel HPL

Wooden frame

Central lock system

Support lock

Hinge bolts

Security cylinder GD6, certified class 6

Rod of the lock system

Hinges adjustable in 3 directions

Door leaf stabilization

100N

90N 860

936

879

956

936

1016

2018

2018

2000

2000

2047

2047

1000

1100

2100

2100

G

PROFIL PRESTIGE "DH"

85

70 (90N)82 (100N)

88

10

nominaldistance

20

GLAZING TYPES OF STAINLESS STILL

FlatLINEA'4 INOX

DECORMAT / MIRRORED

FlatBELT INOX

DECORMAT / MIRROREDSTANDARD FITTINGS

- Glazing with frames of stainless steel - Elektromagnetic blockade

PRESTIGE

available from spring 2013NEW!

OUTSIDE INSIDE

Level “0” of floor

Door width

Page 17: Delta doors 1/2013

Passive doors DELTA PRESTIGE are designated for homes, offices, industrial premises, housing etc. Certificate ITT acc. to EN 14351-1+A1:2010 includes possibility to install different type of glazing. Thermal transmittance for the doors without glazing is Ud[W/(m .K)]=0,6 but doors with glazing increase Ud[W/(m .K)] ≥0,8.Leaf – double rebate type, 88mm thick, with two gaskets. Consist of internal frame made of solid wood with stabilizing profiles inside, filled with polyurethane foam (PUR) covered both side by MFP wooden panels. From the outside leaf is covered by HPL material - highly resistant for atmosphere conditions, scratches and damages. Doors are equipped with three hinges adjustable in 3 dimensions, and system lock driven by cylinder with gear type cam DELTA GD6. Frame is made of solid wood and covered with HPL material, and has additional gasket installed. Threshold is of a special construction PVC/aluminum to ensure high thermal insulation.

Doors are available only as flat. For additional charge, we offer for this doors also: glazing with INOX frames, fittings with AXA handle (as on photo above) .

REMARK! This doors cannot be shortened.

WHITE

CHOCOLATE OAK

COLORS AND PRESSED MOULDING PATTERNS

CONSTRUCTION

DIMENSIONS AND FRAME PROFILES

DOORS DELTA PRESTIGE

DELTA PRESTIGE 90N FLATDELTA PRESTIGE 90N FLAT BELT INOXDELTA PRESTIGE 90N FLAT LINEA'4 INOXDELTA PRESTIGE 100N FLATDELTA PRESTIGE 100N FLAT BELT INOXDELTA PRESTIGE 100N FLAT LINEA'4 INOX

- AXA handrail and handle- Knob handle KLARA or ANETA

ACCESSORIES

Standard set consist of: door leaf 88mm thick, with central lock system, wooden door frame, three adjustable hinges, three hinge bolts, handle TAMARA`2 INOX with stainless steel protective rosette DELTA T1, security cylinder DELTA GD6, certified class 6, door viewer, threshold aluminum/PVC.

PASSIVE external entrance door

16 | DELTA 2013 DELTA 2013 | 17

ANTHRACITE GREY

- ANTHRACITE GREY- WHITE- CHOCOLATE OAK

FLAT

88 mm

knc ei sh sT

0,60 Ud

anr st m la ittm ar ne ch eT

Door viewer

Handle TAMARA`2 INOX

Security cylinder GD6, class 6

Protective rosette DELTA T1

Optional AXA handrail and handle.

Polyurethane foam

MFP board

Safe Panel HPL

Wooden frame

Central lock system

Support lock

Hinge bolts

Security cylinder GD6, certified class 6

Rod of the lock system

Hinges adjustable in 3 directions

Door leaf stabilization

100N

90N 860

936

879

956

936

1016

2018

2018

2000

2000

2047

2047

1000

1100

2100

2100

G

PROFIL PRESTIGE "DH"

85

70 (90N)82 (100N)

88

10

nominaldistance

20

GLAZING TYPES OF STAINLESS STILL

FlatLINEA'4 INOX

DECORMAT / MIRRORED

FlatBELT INOX

DECORMAT / MIRROREDSTANDARD FITTINGS

- Glazing with frames of stainless steel - Elektromagnetic blockade

PRESTIGE

available from spring 2013NEW!

OUTSIDE INSIDE

Level “0” of floor

Door width

Page 18: Delta doors 1/2013

DOORS DELTA GRAND S / GRAND P

DELTA GRAND S 120E i 140E FLATDELTA GRAND S 120E i 140E PRESSEDDELTA GRAND P 120E i 140E FLATDELTA GRAND P 120E i 140E PRESSED

- Threshold for profile P55, made of aluminum, with gasket- Threshold for profile PD150, made of aluminum, with gasket- Bottom drip profile- Frame profile PD150- Frame profile PDT150- Choice of glazing panels

- Fanlights- Handles, rosettes and escutcheons made of stainless steel- Knob handle KLARA or ANETA- Complete TAMARA fitting- Security cylinder GD6 for main lock with multi-key system, certified class 6- Electromechanical handle GZF with fingerprint system- Electromechanical handle GI 2324 operated by code or card

ACCESSORIES

GRAND S standard set consist of: door leaf dimension 90E + 30/50, 56mm thick, with two mortise locks- daily lock with 3 bolts, main lock 6 class with 5 bolts, steel frame to be assembled – profile PU55, 6 hinges, 6 hinge bolts, handle OLIVIA with escutcheons and protective rosette, two cylinders, door viewer.GRAND P standard set consist of: door leaf dimension 90E + 30/50, 56mm thick, central lock system(main lock class 6), with 9 blocking points and daily lock with 3 bolts, steel frame to be assembled – profile PU55, 6 hinges, 6 hinge bolts, handle CARMEN, with escutcheons and protective rosette, two cylinders, door viewer.

GRAND S / GRAND P

STEEL DOUBLE SASH DOORS based on leaf SPECIAL ‘2 or PREMIUM

version GRAND P Certified class 3 according to European standards ENV 1627:2006

GRAND S

GRAND P

18 | DELTA 2013 DELTA 2013 | 19

20

20

ALUALU

Self-extinguishing polystyrene board

Galvanized steel sheet 0.5mm

covered by PVC film

with wood structure

Steel ribs

Hinge bolts

Mortise lock class 6, with handle

Daily mortise lock, with knob

Reinforced closing profile of steel

Secondary leaf blockade

Wood grain structure

Self-extinguishing polystyrene board

Galvanized steel sheet 0.7mm

covered by PVC film with wood structure

Steel ribs

Mortise main lock class 6, with handle

Daily mortise lock, with knob

Support lock

Lock system blocking points

Hinge bolts

Secondary leaf blockade

Security cylinder GD6, certified class 6

Reinforced closing profile of steel

Wood grain structure

WHITE

MAHOGANY

VENGE

GOLDEN OAK

DARK WALNUTANTHRACITE GREY

GR

AN

D S

- R

AM

A/F

LAT,

w

ith 2

x S

QU

AR

E'4

ALU

gla

zing

GR

AN

D S

-R

AM

A/F

LAT,

w

ith 2

x R

EC

TAN

GLE

ALU

MIR

RO

RE

D g

lazi

ng

GR

AN

D S

-R

AM

A/F

LAT,

w

ith 2

x A

RC

H IN

OX

RE

FLE

Xgl

azin

g

GR

AN

D S

/ G

RA

ND

P -

FLA

T/F

LAT,

w

ith 2

x IN

OX

RE

FLE

X g

lazi

ng

GR

AN

D S

/ G

RA

ND

P -

GE

NO

VA,

with

2x

GO

TIC

DIA

MO

ND

gla

zing

GR

AN

D S

/ G

RA

ND

P -

GE

NO

VA P

ATT

ER

N,

with

4x

RE

CTA

NG

LE/S

TIC

K R

EF

LEX

gla

zing

GR

AN

D S

/ G

RA

ND

P -

TR

EN

TO/F

LAT,

w

ith M

OD

ER

N'4

INO

X R

EF

LEX

/ 2x

INO

X R

EF

LEX

gla

zing

GR

AN

D S

- R

AM

A/F

LAT

GR

AN

D S

/ G

RA

ND

P -

GE

NO

VA/R

EC

TAN

GLE

PAT

TE

RN

GR

AN

D S

/ G

RA

ND

P -

FLA

T/F

LAT

GR

AN

D S

/ G

RA

ND

P -

PAR

MA

, w

ith E

LIP

SE

/LO

NG

RE

CTA

NG

LE D

IAM

ON

D g

lazi

ng

Steel double sash doors (GRAND P Certified class 3 according to European standards ENV 1627:2006) can be applied as Internal or External entrance doors for offices, industrial premises, housing etc. Certificate ITT acc. to EN 14351-1+A1:2010 includes possibility to install different type of glazing. Leaf – single rebate type, 56mm thick, made of galvanized steel sheet 0.5mm (version S) or 0.7mm (version P) covered by PVC film with wood grain structure. Leaf is filled with board of self-extinguishing polyurethane foam and equipped with system lock and additional daily lock (version P) or two locks (version S), three hinges and three hinge bolts. Frame- made of 1,5mm galvanized steel covered by PVC film with wood grain structure, allows application of additional gasket-advised in case of installation as external entrance doors . Because doors are made of steel, in case of installation as external entrance doors we recommend to install a small roofing over the door, to prevent overheating from the sunshine. Water resistance class 5B EN-1027 applies only if installed as opened outward. Doors are offered as flat or with pressed patterns. For additional charge, we offer for this doors also: glazing, aluminum thresholds with gasket, cylinders in system keyed alike, electromechanical handles , also alternative door frame profiles: PD, PDT.

NEW! Available – door frame with thermal insulation insert (profile PDT), glazing with frames of Stainles Steel or aluminum, fanlights, fittings of Stainles Steel

REMARK! Doors cannot be shorten. The second leaf can be available in pressed version only at size 140 (90=50).

PROFILE “PU” PROFILE “PD”, PDT“ “

Level “0” of floor

Level “0” of concrete base

Door width

Level “0” of floor

Level “0” of concrete base

PROFILE “PD”, PDT“ “ (optional)

PROFILE “PU” (optional)

Thermal transmittance:Acoustic insulation:R (C;C ) = 27 (-2;-4) dBw tr

- Leaf with glazing2 U [W/(m .K)] = od 1,57 do 1,87d

- Leaf without glazing2 U [W/(m .K)] = 1,53d

CONSTRUCTION

Door viewer

Protective rosette DELTA T1 (optional DELTA T4 class 4)

OUTSIDE INSIDE

Cylinder DELTA JK with knob

Escutcheon OLIVIA

Handle OLIVIA

Cylinder DELTA JKZ

class 3

Protective rosette DELTA T4, class 4

INSIDE

Cylinder DELTA JK with knob

Handle CARMEN

Certified cylinder

DELTA GD6

Door viewer

DIMENSIONS AND FRAME PROFILES

nominal distance

Page 19: Delta doors 1/2013

DOORS DELTA GRAND S / GRAND P

DELTA GRAND S 120E i 140E FLATDELTA GRAND S 120E i 140E PRESSEDDELTA GRAND P 120E i 140E FLATDELTA GRAND P 120E i 140E PRESSED

- Threshold for profile P55, made of aluminum, with gasket- Threshold for profile PD150, made of aluminum, with gasket- Bottom drip profile- Frame profile PD150- Frame profile PDT150- Choice of glazing panels

- Fanlights- Handles, rosettes and escutcheons made of stainless steel- Knob handle KLARA or ANETA- Complete TAMARA fitting- Security cylinder GD6 for main lock with multi-key system, certified class 6- Electromechanical handle GZF with fingerprint system- Electromechanical handle GI 2324 operated by code or card

ACCESSORIES

GRAND S standard set consist of: door leaf dimension 90E + 30/50, 56mm thick, with two mortise locks- daily lock with 3 bolts, main lock 6 class with 5 bolts, steel frame to be assembled – profile PU55, 6 hinges, 6 hinge bolts, handle OLIVIA with escutcheons and protective rosette, two cylinders, door viewer.GRAND P standard set consist of: door leaf dimension 90E + 30/50, 56mm thick, central lock system(main lock class 6), with 9 blocking points and daily lock with 3 bolts, steel frame to be assembled – profile PU55, 6 hinges, 6 hinge bolts, handle CARMEN, with escutcheons and protective rosette, two cylinders, door viewer.

GRAND S / GRAND P

STEEL DOUBLE SASH DOORS based on leaf SPECIAL ‘2 or PREMIUM

version GRAND P Certified class 3 according to European standards ENV 1627:2006

GRAND S

GRAND P

18 | DELTA 2013 DELTA 2013 | 19

20

20

ALUALU

Self-extinguishing polystyrene board

Galvanized steel sheet 0.5mm

covered by PVC film

with wood structure

Steel ribs

Hinge bolts

Mortise lock class 6, with handle

Daily mortise lock, with knob

Reinforced closing profile of steel

Secondary leaf blockade

Wood grain structure

Self-extinguishing polystyrene board

Galvanized steel sheet 0.7mm

covered by PVC film with wood structure

Steel ribs

Mortise main lock class 6, with handle

Daily mortise lock, with knob

Support lock

Lock system blocking points

Hinge bolts

Secondary leaf blockade

Security cylinder GD6, certified class 6

Reinforced closing profile of steel

Wood grain structure

WHITE

MAHOGANY

VENGE

GOLDEN OAK

DARK WALNUTANTHRACITE GREY

GR

AN

D S

- R

AM

A/F

LAT,

w

ith 2

x S

QU

AR

E'4

ALU

gla

zing

GR

AN

D S

-R

AM

A/F

LAT,

w

ith 2

x R

EC

TAN

GLE

ALU

MIR

RO

RE

D g

lazi

ng

GR

AN

D S

-R

AM

A/F

LAT,

w

ith 2

x A

RC

H IN

OX

RE

FLE

Xgl

azin

g

GR

AN

D S

/ G

RA

ND

P -

FLA

T/F

LAT,

w

ith 2

x IN

OX

RE

FLE

X g

lazi

ng

GR

AN

D S

/ G

RA

ND

P -

GE

NO

VA,

with

2x

GO

TIC

DIA

MO

ND

gla

zing

GR

AN

D S

/ G

RA

ND

P -

GE

NO

VA P

ATT

ER

N,

with

4x

RE

CTA

NG

LE/S

TIC

K R

EF

LEX

gla

zing

GR

AN

D S

/ G

RA

ND

P -

TR

EN

TO/F

LAT,

w

ith M

OD

ER

N'4

INO

X R

EF

LEX

/ 2x

INO

X R

EF

LEX

gla

zing

GR

AN

D S

- R

AM

A/F

LAT

GR

AN

D S

/ G

RA

ND

P -

GE

NO

VA/R

EC

TAN

GLE

PAT

TE

RN

GR

AN

D S

/ G

RA

ND

P -

FLA

T/F

LAT

GR

AN

D S

/ G

RA

ND

P -

PAR

MA

, w

ith E

LIP

SE

/LO

NG

RE

CTA

NG

LE D

IAM

ON

D g

lazi

ng

Steel double sash doors (GRAND P Certified class 3 according to European standards ENV 1627:2006) can be applied as Internal or External entrance doors for offices, industrial premises, housing etc. Certificate ITT acc. to EN 14351-1+A1:2010 includes possibility to install different type of glazing. Leaf – single rebate type, 56mm thick, made of galvanized steel sheet 0.5mm (version S) or 0.7mm (version P) covered by PVC film with wood grain structure. Leaf is filled with board of self-extinguishing polyurethane foam and equipped with system lock and additional daily lock (version P) or two locks (version S), three hinges and three hinge bolts. Frame- made of 1,5mm galvanized steel covered by PVC film with wood grain structure, allows application of additional gasket-advised in case of installation as external entrance doors . Because doors are made of steel, in case of installation as external entrance doors we recommend to install a small roofing over the door, to prevent overheating from the sunshine. Water resistance class 5B EN-1027 applies only if installed as opened outward. Doors are offered as flat or with pressed patterns. For additional charge, we offer for this doors also: glazing, aluminum thresholds with gasket, cylinders in system keyed alike, electromechanical handles , also alternative door frame profiles: PD, PDT.

NEW! Available – door frame with thermal insulation insert (profile PDT), glazing with frames of Stainles Steel or aluminum, fanlights, fittings of Stainles Steel

REMARK! Doors cannot be shorten. The second leaf can be available in pressed version only at size 140 (90=50).

PROFILE “PU” PROFILE “PD”, PDT“ “

Level “0” of floor

Level “0” of concrete base

Door width

Level “0” of floor

Level “0” of concrete base

PROFILE “PD”, PDT“ “ (optional)

PROFILE “PU” (optional)

Thermal transmittance:Acoustic insulation:R (C;C ) = 27 (-2;-4) dBw tr

- Leaf with glazing2 U [W/(m .K)] = od 1,57 do 1,87d

- Leaf without glazing2 U [W/(m .K)] = 1,53d

CONSTRUCTION

Door viewer

Protective rosette DELTA T1 (optional DELTA T4 class 4)

OUTSIDE INSIDE

Cylinder DELTA JK with knob

Escutcheon OLIVIA

Handle OLIVIA

Cylinder DELTA JKZ

class 3

Protective rosette DELTA T4, class 4

INSIDE

Cylinder DELTA JK with knob

Handle CARMEN

Certified cylinder

DELTA GD6

Door viewer

DIMENSIONS AND FRAME PROFILES

nominal distance

Page 20: Delta doors 1/2013

Steel anti-burglary , fire rated and smoke-tight doors DELTA MAGNUM are designated to protect rooms where: high anti-burglary level is requested (version MAGNUM 4C) , medium anti-burglary level is requested (version MAGNUM’3 2H) or low anti-burglary level is requested (version MAGNUM’3).

All versions of MAGNUM doors ensure fir-rating EI30 and smoke – tight feature. Doors could be applied as internal entrance doors for offices, industrial premises, housing etc. They are available only as flat and with two kinds of frames: profile PU and PD.

REMARK! Doors MAGNUM are available with pressed pattern Londyn, but minimum order qty is 20pcs

ATTENTION! In case of this doors it is necessary to install a threshold supplied by manufacturer and a door closer (or door closing hinge) – acc. to technical specification. Door viewer and opening limiter are available. This door cannot be shorten.

WHITECOLORS AND PRESSED MOULDING PATTERNS

DOORS SERIES DELTA MAGNUM

DELTA MAGNUM 4C FLATDELTA MAGNUM '2 C3 FLATDELTA MAGNUM '3 2H FLATDELTA MAGNUM '3 hotelowe FLAT

- Threshold for profile PU made of solid oak, with gasket- Threshold for profile PD150 made of solid oak, with gasket

- Door closer DELTA OUDE silver, brown , white (or another of the list in the TA)or- Door closer hinges

REQUIRED ACCESSORIES

Standard set consist of: door leaf 56mm thick, central lock system(main lock class 6), with 9 blocking points and daily lock with 3 bolts (MAGNUM 4C; MAGNUM`2 C3), or two mortise lock (MAGNUM`3 2H), or one Hotel system lock (MAGNUM`3), steel frame to be assembled – profile PU55, 3 hinges, 3 hinge bolts, handle CARMEN, with escutcheons and protective rosette, two cylinders, door viewer.Price does not includehotellock.

MAGNUM 4C, MAGNUM'2 C3, MAGNUM'3

- Open limiter- Door viewer CYKLOP PANORAMA 200- Door viewer FDV- Security cylinder GD6 for main lock with multi-key system, certified class 6- Frame profile PD150

- Automatic drop threshold- DELTA LS 8008 Hotel handle and electromechanical lock- DELTA LS 8015 Hotel handle

OPTIONAL ACCESSORIES

20 | DELTA 2013 DELTA 2013 | 21

2038, 2053

2060, 2075

840, 870

962, 1000

1998

2020

OAK OAK

STEEL ANTI-BURGLARY, FIRE RATED AND SMOKE-TIGHT DOORS

MAHOGANY

GOLDEN OAK

DELTA MAGNUM'2 C3 DELTA MAGNUM'3DELTA MAGNUM'3 2HRockwool

Galvanized steel sheet 0.7mm covered by PVC film with wood structure

Wooden door frame

Hardened rods

Mortise main lock class 6, with handle

Support lock

Daily mortise lock

Hinges

Hinge bolts

Security cylinder GD6, certified class 6

Reinforcement for door closer

Mechanical or electromechanical (DELTA LS 8008) mortise lock

DELTA MAGNUM 4C

- MAGNUM 4C;class 4 acc.to ENV 1627, EI 30 EN 13501-2+A1:2010

- MAGNUM '2 C3;class 3 acc. to ENV 1627, EI 30 EN 13501-2+A1:2010

- MAGNUM '3 2H;class 2 acc. to ENV 1627, EI 30 PN-EN 13501-2+A1:2010

- MAGNUM '3; with DELTA LS8008 hotel system lock; EI 30 PN-EN 13501-2+A1:2010 recommended as hotel room door

All versions of DELTA MAGNUM doors meet the requirements of Sa and Sm class acc. to EN 13501-2+A1:2010

DARK WALNUT

- WHITE- MAHOGANY- DARK WALNUT- GOLDEN OAK

FLAT

Fireproof Door viewer

Protective rosette DELTA T4, class 4

INSIDE

Cylinder DELTA JK with knob

Escutcheon CARMEN

Handle CARMEN

Certified cylinder

DELTA GD6

Opening limiter (optional)

OUTSIDE

PROFILE “PU” PROFILE “PD”

PROFILE “PD” (optional)

PROFILE “PU”

Door width

CONSTRUCTION

Acoustic insulation:R (C;C ) = 35 (-2;-4) dBw tr

Acoustic insulation:R (C;C ) = 35 (-2;-4) dBw tr

Acoustic insulation:R (C;C ) = 32 (-1;-4) dBw tr

Acoustic insulation:R (C;C ) = 32 (-1;-4) dBw tr

DIMENSIONS AND FRAME PROFILES

nominal distance

Page 21: Delta doors 1/2013

Steel anti-burglary , fire rated and smoke-tight doors DELTA MAGNUM are designated to protect rooms where: high anti-burglary level is requested (version MAGNUM 4C) , medium anti-burglary level is requested (version MAGNUM’3 2H) or low anti-burglary level is requested (version MAGNUM’3).

All versions of MAGNUM doors ensure fir-rating EI30 and smoke – tight feature. Doors could be applied as internal entrance doors for offices, industrial premises, housing etc. They are available only as flat and with two kinds of frames: profile PU and PD.

REMARK! Doors MAGNUM are available with pressed pattern Londyn, but minimum order qty is 20pcs

ATTENTION! In case of this doors it is necessary to install a threshold supplied by manufacturer and a door closer (or door closing hinge) – acc. to technical specification. Door viewer and opening limiter are available. This door cannot be shorten.

WHITECOLORS AND PRESSED MOULDING PATTERNS

DOORS SERIES DELTA MAGNUM

DELTA MAGNUM 4C FLATDELTA MAGNUM '2 C3 FLATDELTA MAGNUM '3 2H FLATDELTA MAGNUM '3 hotelowe FLAT

- Threshold for profile PU made of solid oak, with gasket- Threshold for profile PD150 made of solid oak, with gasket

- Door closer DELTA OUDE silver, brown , white (or another of the list in the TA)or- Door closer hinges

REQUIRED ACCESSORIES

Standard set consist of: door leaf 56mm thick, central lock system(main lock class 6), with 9 blocking points and daily lock with 3 bolts (MAGNUM 4C; MAGNUM`2 C3), or two mortise lock (MAGNUM`3 2H), or one Hotel system lock (MAGNUM`3), steel frame to be assembled – profile PU55, 3 hinges, 3 hinge bolts, handle CARMEN, with escutcheons and protective rosette, two cylinders, door viewer.Price does not includehotellock.

MAGNUM 4C, MAGNUM'2 C3, MAGNUM'3

- Open limiter- Door viewer CYKLOP PANORAMA 200- Door viewer FDV- Security cylinder GD6 for main lock with multi-key system, certified class 6- Frame profile PD150

- Automatic drop threshold- DELTA LS 8008 Hotel handle and electromechanical lock- DELTA LS 8015 Hotel handle

OPTIONAL ACCESSORIES

20 | DELTA 2013 DELTA 2013 | 21

2038, 2053

2060, 2075

840, 870

962, 1000

1998

2020

OAK OAK

STEEL ANTI-BURGLARY, FIRE RATED AND SMOKE-TIGHT DOORS

MAHOGANY

GOLDEN OAK

DELTA MAGNUM'2 C3 DELTA MAGNUM'3DELTA MAGNUM'3 2HRockwool

Galvanized steel sheet 0.7mm covered by PVC film with wood structure

Wooden door frame

Hardened rods

Mortise main lock class 6, with handle

Support lock

Daily mortise lock

Hinges

Hinge bolts

Security cylinder GD6, certified class 6

Reinforcement for door closer

Mechanical or electromechanical (DELTA LS 8008) mortise lock

DELTA MAGNUM 4C

- MAGNUM 4C;class 4 acc.to ENV 1627, EI 30 EN 13501-2+A1:2010

- MAGNUM '2 C3;class 3 acc. to ENV 1627, EI 30 EN 13501-2+A1:2010

- MAGNUM '3 2H;class 2 acc. to ENV 1627, EI 30 PN-EN 13501-2+A1:2010

- MAGNUM '3; with DELTA LS8008 hotel system lock; EI 30 PN-EN 13501-2+A1:2010 recommended as hotel room door

All versions of DELTA MAGNUM doors meet the requirements of Sa and Sm class acc. to EN 13501-2+A1:2010

DARK WALNUT

- WHITE- MAHOGANY- DARK WALNUT- GOLDEN OAK

FLAT

Fireproof Door viewer

Protective rosette DELTA T4, class 4

INSIDE

Cylinder DELTA JK with knob

Escutcheon CARMEN

Handle CARMEN

Certified cylinder

DELTA GD6

Opening limiter (optional)

OUTSIDE

PROFILE “PU” PROFILE “PD”

PROFILE “PD” (optional)

PROFILE “PU”

Door width

CONSTRUCTION

Acoustic insulation:R (C;C ) = 35 (-2;-4) dBw tr

Acoustic insulation:R (C;C ) = 35 (-2;-4) dBw tr

Acoustic insulation:R (C;C ) = 32 (-1;-4) dBw tr

Acoustic insulation:R (C;C ) = 32 (-1;-4) dBw tr

DIMENSIONS AND FRAME PROFILES

nominal distance

Page 22: Delta doors 1/2013

22 | DELTA 2013 DELTA 2013 | 23

Steel reinforced doors DELTA ENTER S can be applied as Internal or External entrance doors for offices, industrial premises, housing etc. Certificate ITT acc. to EN 14351-1+A1:2010 includes possibility to install different type of glazing. Leaf – single rebate type, 56mm thick, made of galvanized steel sheet 0.7mm covered by PVC film with wood grain structure. Leaf is filled with board of self-extinguishing polyurethane foam and equipped with one mortise locks, three hinges and three hinge bolts. The main lock DELTA DD6H/Z - certified class 6 acc. to EN 12209:2005 – is operated by cylinder with gear type cam. The upper and hinge sides of leaf has been reinforced to allow installation of door closer and extensive use in public locations. Frame- made of 1,5mm galvanized steel covered by PVC film with wood grain structure, with a second gasket . Because doors are made of steel, in case of installation as external entrance doors we recommend to install a small roofing over the door, to prevent overheating from the sunshine. For additional charge, we offer for this doors also: glazing, thresholds with gasket, door frame with thermal insulation insert (profile PDT), door c l o s e r , e l e c t r o m e c h a n i c a l h a n d l e s , electromagnetic lock, knob handle.

COLORS AND PRESSED MOULDING PATTERNS

DIMENSIONS AND FRAME PROFILES

DOORS DELTA ENTER S

DELTA ENTER S FLATDELTA ENTER S DEEP PRESSED GENOVA

- Threshold for profile P55, PU made of PCV, with gasket, color dark brown- Threshold for profile P55, PU made of PCV, with gasket, color: dark wood, golden oak- Threshold for profile P55, PU made of solid oak, with gasket- Threshold for profile PD150, PDT150 made of solid oak, with gasket- Threshold for profile P55, PU made of aluminum, with gasket- Threshold for profile PD150, PDT150 made of aluminum, with gasket- Frame profile PD150- Frame profile PDT 150- Choice of glazing panels- Fanlights

- Bottom drip profile - Bottom leaf closing profile - Electromechanical handle GZF with fingerprint system- Electromechanical handle GI 2324 operated by code or card- Security cylinder GD6, certified class 6- Knob handle KLARA or ANETA- Door closer DELTA OUDE (white, brown, silver)- Security cylinder GD6 for main lock with multi-key system, certified class 6- Electromagnetic blockade installed in the door frame 12V AC/DC

ACCESSORIES

standard set consist of: door leaf 56mm thick, with one mortise lock 6 class with 5 bolts, steel frame to be assembled – profile PU55, 3 hinges, handle OLIVIA with protective rosette, gear type cylinder, door viewer.

ENTER S

STEEL REINFORCED DOORcertified class 2 acc. to ENV-1627:2006

Recommended as main entrance door to apartment buildings.

Self-extinguishing polystyrene board

Galvanized steel sheet 0.7mm covered by PVC film with wood structure

Mortise lock class 6, with handle

Hinges

Bottom, closing profile of steel

Wood grain structure

Reinforcement for the door closer

2060, 2075

962, 1000

2019

MAHOGANY

GOLDEN OAK

DARK WALNUT

- MAHOGANY- DARK WALNUT- GOLDEN OAK

- MAHOGANY- DARK WALNUT- GOLDEN OAK

Protective rosette

DELTA T1

ECONOMIC

GENERAL PURPOSE STEEL DOOR

WHITE similar to RAL 9010

BROWN RAL 8017similar to

ZINC

COLORS AND PRESSED MOULDING PATTERNS

- ANTHRACITE GREY- WHITE- BROWN- ZINC

Handle TANIA

Cylinder DELTA JK

Steel doors ECONOMIC can be applied as

Internal or External entrance doors for o industrial

premises, basing, stores etc. Certificate ITT acc. to

EN 14351-1+A1:2010. . Leaf – single rebate type,

41mm thick, made of galvanized steel sheet

0.5mm. Leaf is filled with board of self-

extinguishing polyurethane foam and equipped

with one mortise lock. Doors are available only as

flat, in white or brown color. Doors are painted by

manufacturer but additional painting is strongly

advisable to prevent from scratches.

REMARK! construction of leaf allows it’s

installation also on existing steel frames or

application of most popular steel frames.

Possibility to shorten: 14cm

DOORS DELTA ECONOMIC

DELTA ECONOMIC GŁADKIE ZINCDELTA ECONOMIC GŁADKIE WHITE, BROWN

- Frame in zinc color, with gasket- Handle TANIA- Escutcheons TANIA

- Cylinder30/40mm- Threshold made of PCV, with gasket, color dark brown

ACCESSORIES

standard set consist of: only the door leaf, with one 72/50 mortise lock.

DIMENSIONS AND FRAME PROFILES

10 20

2030, 2065

2030, 2065

838, 908

938, 1008

814

914

844

944

2005

2005

2009

2009

2024

2024

8

55

55

27

29

ANTHRACITE GREY

FLATGENOVA

DEEP PRESSED PATTERN

OUTSIDE INSIDE

Handle OLIVIA

Cylinder DELTA JKZ

PROFILE “PU” (standard)

Level “0” of floor

Level “0” of concrete base

Door widthPROFILE “PU”

CONSTRUCTION

Thermal transmittance:2U [W/(m .K)] = 1,33d

Acoustic insulation:R (C;C ) = 28 (-2;-4) dBw tr

OUTSIDE INSIDE

FLAT

CONSTRUCTION

Cylinder DELTA JK

Handle TANIA

PROFILE “NC” with moulding

Door width Level “0” of floor

Self-extinguishing polystyrene board

Galvanized steel sheet 0.5mm covered by PVC film with wood structure

Mortise lock 72/50, with handle

Hinges

Bottom, closing profile of steel

nominal distance

nominal distance

Page 23: Delta doors 1/2013

22 | DELTA 2013 DELTA 2013 | 23

Steel reinforced doors DELTA ENTER S can be applied as Internal or External entrance doors for offices, industrial premises, housing etc. Certificate ITT acc. to EN 14351-1+A1:2010 includes possibility to install different type of glazing. Leaf – single rebate type, 56mm thick, made of galvanized steel sheet 0.7mm covered by PVC film with wood grain structure. Leaf is filled with board of self-extinguishing polyurethane foam and equipped with one mortise locks, three hinges and three hinge bolts. The main lock DELTA DD6H/Z - certified class 6 acc. to EN 12209:2005 – is operated by cylinder with gear type cam. The upper and hinge sides of leaf has been reinforced to allow installation of door closer and extensive use in public locations. Frame- made of 1,5mm galvanized steel covered by PVC film with wood grain structure, with a second gasket . Because doors are made of steel, in case of installation as external entrance doors we recommend to install a small roofing over the door, to prevent overheating from the sunshine. For additional charge, we offer for this doors also: glazing, thresholds with gasket, door frame with thermal insulation insert (profile PDT), door c l o s e r , e l e c t r o m e c h a n i c a l h a n d l e s , electromagnetic lock, knob handle.

COLORS AND PRESSED MOULDING PATTERNS

DIMENSIONS AND FRAME PROFILES

DOORS DELTA ENTER S

DELTA ENTER S FLATDELTA ENTER S DEEP PRESSED GENOVA

- Threshold for profile P55, PU made of PCV, with gasket, color dark brown- Threshold for profile P55, PU made of PCV, with gasket, color: dark wood, golden oak- Threshold for profile P55, PU made of solid oak, with gasket- Threshold for profile PD150, PDT150 made of solid oak, with gasket- Threshold for profile P55, PU made of aluminum, with gasket- Threshold for profile PD150, PDT150 made of aluminum, with gasket- Frame profile PD150- Frame profile PDT 150- Choice of glazing panels- Fanlights

- Bottom drip profile - Bottom leaf closing profile - Electromechanical handle GZF with fingerprint system- Electromechanical handle GI 2324 operated by code or card- Security cylinder GD6, certified class 6- Knob handle KLARA or ANETA- Door closer DELTA OUDE (white, brown, silver)- Security cylinder GD6 for main lock with multi-key system, certified class 6- Electromagnetic blockade installed in the door frame 12V AC/DC

ACCESSORIES

standard set consist of: door leaf 56mm thick, with one mortise lock 6 class with 5 bolts, steel frame to be assembled – profile PU55, 3 hinges, handle OLIVIA with protective rosette, gear type cylinder, door viewer.

ENTER S

STEEL REINFORCED DOORcertified class 2 acc. to ENV-1627:2006

Recommended as main entrance door to apartment buildings.

Self-extinguishing polystyrene board

Galvanized steel sheet 0.7mm covered by PVC film with wood structure

Mortise lock class 6, with handle

Hinges

Bottom, closing profile of steel

Wood grain structure

Reinforcement for the door closer

2060, 2075

962, 1000

2019

MAHOGANY

GOLDEN OAK

DARK WALNUT

- MAHOGANY- DARK WALNUT- GOLDEN OAK

- MAHOGANY- DARK WALNUT- GOLDEN OAK

Protective rosette

DELTA T1

ECONOMIC

GENERAL PURPOSE STEEL DOOR

WHITE similar to RAL 9010

BROWN RAL 8017similar to

ZINC

COLORS AND PRESSED MOULDING PATTERNS

- ANTHRACITE GREY- WHITE- BROWN- ZINC

Handle TANIA

Cylinder DELTA JK

Steel doors ECONOMIC can be applied as

Internal or External entrance doors for o industrial

premises, basing, stores etc. Certificate ITT acc. to

EN 14351-1+A1:2010. . Leaf – single rebate type,

41mm thick, made of galvanized steel sheet

0.5mm. Leaf is filled with board of self-

extinguishing polyurethane foam and equipped

with one mortise lock. Doors are available only as

flat, in white or brown color. Doors are painted by

manufacturer but additional painting is strongly

advisable to prevent from scratches.

REMARK! construction of leaf allows it’s

installation also on existing steel frames or

application of most popular steel frames.

Possibility to shorten: 14cm

DOORS DELTA ECONOMIC

DELTA ECONOMIC GŁADKIE ZINCDELTA ECONOMIC GŁADKIE WHITE, BROWN

- Frame in zinc color, with gasket- Handle TANIA- Escutcheons TANIA

- Cylinder30/40mm- Threshold made of PCV, with gasket, color dark brown

ACCESSORIES

standard set consist of: only the door leaf, with one 72/50 mortise lock.

DIMENSIONS AND FRAME PROFILES

10 20

2030, 2065

2030, 2065

838, 908

938, 1008

814

914

844

944

2005

2005

2009

2009

2024

2024

8

55

55

27

29

ANTHRACITE GREY

FLATGENOVA

DEEP PRESSED PATTERN

OUTSIDE INSIDE

Handle OLIVIA

Cylinder DELTA JKZ

PROFILE “PU” (standard)

Level “0” of floor

Level “0” of concrete base

Door widthPROFILE “PU”

CONSTRUCTION

Thermal transmittance:2U [W/(m .K)] = 1,33d

Acoustic insulation:R (C;C ) = 28 (-2;-4) dBw tr

OUTSIDE INSIDE

FLAT

CONSTRUCTION

Cylinder DELTA JK

Handle TANIA

PROFILE “NC” with moulding

Door width Level “0” of floor

Self-extinguishing polystyrene board

Galvanized steel sheet 0.5mm covered by PVC film with wood structure

Mortise lock 72/50, with handle

Hinges

Bottom, closing profile of steel

nominal distance

nominal distance

Page 24: Delta doors 1/2013

GLAZING WITH PVC FRAMES

24 | DELTA 2013 DELTA 2013 | 25

PVC glazing frames are designed as an accessory only for UNIVERSAL, SPECIAL, PREMIUM, ENTER S and GRAND doors. Because doors are made of steel, in case of installation as external entrance doors we recommend to install a small roofing over the door, to prevent overheating from the sunshine. It is also recommended use door frames with a thermal barrier PDT (see p.36).

NOTE: In case of doors relative certification ranks acc. to ENV 1627 do apply only for doors without glazing. Applied glazing also decrease thermal transmittance parameters of the door (see sample table on page 23).

AV

AIL

AB

LE P

VC

FR

AM

E C

OLO

RS

Deep pressed SUN SUN reflex

UNIVERSAL

Deep pressed GENOVALONG RECTANGLE reflex

GRAND S / GRAND P GRAND S / GRAND P

2

Deep pressed LONDONLONDON reflex

UNIVERSAL

Deep pressed VERONAGOTIC diamond

UNIVERSAL

Deep pressed VERONALONDON diamond

UNIVERSAL

Deep pressed LONDONRECTANGLE reflex

UNIVERSAL

Deep pressed GENOVA LONDON diamond

SPECIAL / PREMIUM / GRAND / ENTER S

Deep pressed TRENTOMODERN`2 reflex

Deep pressed TRENTOMODERN`4 reflex

Deep pressed PARMAELIPSE diamond

Deep pressed GENOVASTICK convex

Deep pressed GENOVA SUN diamond

NEW !!! GLAZING FRAME CONNECTIONS AND INSTALL SCREW CAPS

FROM INSIDE

SPECIAL / GRAND S / PREMIUM 100E

Deep pressed RAMALIMA diamond

SPECIAL / GRAND SPREMIUM 100E

/

Deep pressed RAMAARCH diamond

SPECIAL / PREMIUM / GRAND / ENTER S

SPECIAL / PREMIUM / GRAND / ENTER S

SPECIAL / PREMIUM / GRAND / ENTER S

SPECIAL / PREMIUM / GRAND / ENTER S

SPECIAL / PREMIUM / GRAND / ENTER S

SPECIAL / PREMIUM / GRAND / ENTER S

SPECIAL / PREMIUM / GRAND SPECIAL / PREMIUM / GRAND SPECIAL / PREMIUM / GRAND

GRAND S / GRAND P

PARMAGENOVATRENTOPARMAGENOVATRENTORAMAPARMAGENOVATRENTOPARMAGENOVATRENTORAMA PRESSEDLONDYNSUNVERONALONDYNSUNVERONAGENOVAFLATFLAT4 SQUARES

80N

90E

80N

90E

100E

80

90E

90E30

50

SPECIAL

PREMIUM

UNIVERSAL

ENTER S

GRAND S/P *

* GRAND S - PRIMARY DOOR LEAF (see a. glazing for SPECIAL)* GRAND P - PRIMARY DOOR LEAF (see a. glazing for PREMIUM)

dimension pattern

color glazing type

LONDON SUN ELIPSE MODERN ARCH LIMA RECTANGLE LONG RECTANGLE GOTIC UMBRELLA STICK 4x

RECTANGLEWHITE MAHOGANYDARK

WALNUTVENGE GOLDEN

OAKANTHRACITE

GREYdoor model

PVC GLAZING AVAILABLE FOR A PARTICULAR PRESSING PATTERNS

UN

IVE

RS

AL

SP

EC

IAL

/ P

RE

MIU

M

SPECIAL / GRAND SPREMIUM 100E

/

Deep pressed RAMALONG RECTANGLE decor mat

Unusual Glazing (e.g. PVC frames glazing for flat doors) are possible to do for an extra charge ONLY after consultation with the sales office.

Deep pressed GENOVAGOTIC diamond

Deep pressed GENOVAUMBRELLA reflex

Deep pressed GENOVAUMBRELLA`2 reflex

Deep pressed GENOVA 2x GOTIC diamond

Deep pressed GENOVA4x RECTANGLE/STICK reflex

Deep pressed PARMAELIPSE/LONG RECTANGLE diamond

WHITE MAHOGANY DARK WALNUT VENGE GOLDEN OAK ANTHRACITE GREYTHERMAL TRANSMITTANCE

PATERNS FLAT STICKLONDON

reflexSUN

reflexGOTIC reflex

ELIPSE diamond

Page 25: Delta doors 1/2013

GLAZING WITH PVC FRAMES

24 | DELTA 2013 DELTA 2013 | 25

PVC glazing frames are designed as an accessory only for UNIVERSAL, SPECIAL, PREMIUM, ENTER S and GRAND doors. Because doors are made of steel, in case of installation as external entrance doors we recommend to install a small roofing over the door, to prevent overheating from the sunshine. It is also recommended use door frames with a thermal barrier PDT (see p.36).

NOTE: In case of doors relative certification ranks acc. to ENV 1627 do apply only for doors without glazing. Applied glazing also decrease thermal transmittance parameters of the door (see sample table on page 23).

AV

AIL

AB

LE P

VC

FR

AM

E C

OLO

RS

Deep pressed SUN SUN reflex

UNIVERSAL

Deep pressed GENOVALONG RECTANGLE reflex

GRAND S / GRAND P GRAND S / GRAND P

2

Deep pressed LONDONLONDON reflex

UNIVERSAL

Deep pressed VERONAGOTIC diamond

UNIVERSAL

Deep pressed VERONALONDON diamond

UNIVERSAL

Deep pressed LONDONRECTANGLE reflex

UNIVERSAL

Deep pressed GENOVA LONDON diamond

SPECIAL / PREMIUM / GRAND / ENTER S

Deep pressed TRENTOMODERN`2 reflex

Deep pressed TRENTOMODERN`4 reflex

Deep pressed PARMAELIPSE diamond

Deep pressed GENOVASTICK convex

Deep pressed GENOVA SUN diamond

NEW !!! GLAZING FRAME CONNECTIONS AND INSTALL SCREW CAPS

FROM INSIDE

SPECIAL / GRAND S / PREMIUM 100E

Deep pressed RAMALIMA diamond

SPECIAL / GRAND SPREMIUM 100E

/

Deep pressed RAMAARCH diamond

SPECIAL / PREMIUM / GRAND / ENTER S

SPECIAL / PREMIUM / GRAND / ENTER S

SPECIAL / PREMIUM / GRAND / ENTER S

SPECIAL / PREMIUM / GRAND / ENTER S

SPECIAL / PREMIUM / GRAND / ENTER S

SPECIAL / PREMIUM / GRAND / ENTER S

SPECIAL / PREMIUM / GRAND SPECIAL / PREMIUM / GRAND SPECIAL / PREMIUM / GRAND

GRAND S / GRAND P

PARMAGENOVATRENTOPARMAGENOVATRENTORAMAPARMAGENOVATRENTOPARMAGENOVATRENTORAMA PRESSEDLONDYNSUNVERONALONDYNSUNVERONAGENOVAFLATFLAT4 SQUARES

80N

90E

80N

90E

100E

80

90E

90E30

50

SPECIAL

PREMIUM

UNIVERSAL

ENTER S

GRAND S/P *

* GRAND S - PRIMARY DOOR LEAF (see a. glazing for SPECIAL)* GRAND P - PRIMARY DOOR LEAF (see a. glazing for PREMIUM)

dimension pattern

color glazing type

LONDON SUN ELIPSE MODERN ARCH LIMA RECTANGLE LONG RECTANGLE GOTIC UMBRELLA STICK 4x

RECTANGLEWHITE MAHOGANYDARK

WALNUTVENGE GOLDEN

OAKANTHRACITE

GREYdoor model

PVC GLAZING AVAILABLE FOR A PARTICULAR PRESSING PATTERNS

UN

IVE

RS

AL

SP

EC

IAL

/ P

RE

MIU

M

SPECIAL / GRAND SPREMIUM 100E

/

Deep pressed RAMALONG RECTANGLE decor mat

Unusual Glazing (e.g. PVC frames glazing for flat doors) are possible to do for an extra charge ONLY after consultation with the sales office.

Deep pressed GENOVAGOTIC diamond

Deep pressed GENOVAUMBRELLA reflex

Deep pressed GENOVAUMBRELLA`2 reflex

Deep pressed GENOVA 2x GOTIC diamond

Deep pressed GENOVA4x RECTANGLE/STICK reflex

Deep pressed PARMAELIPSE/LONG RECTANGLE diamond

WHITE MAHOGANY DARK WALNUT VENGE GOLDEN OAK ANTHRACITE GREYTHERMAL TRANSMITTANCE

PATERNS FLAT STICKLONDON

reflexSUN

reflexGOTIC reflex

ELIPSE diamond

Page 26: Delta doors 1/2013

GLAZING WITH PVC FRAMES

26 | DELTA 2013 DELTA 2013 | 27

GLAZING TYPES

MODERN’4 LIMA

GLAZING with frames of stainles steel / alu

GOTIC REFLEX

GOTIC CONVEX

MIRRORED

GOTIC DIAMOND

GOTICMIRRORED / DECORMAT

LONG RECTANGLE

REFLEX

LONG RECTANGLE DIAMOND

LONG RECTANGLE MIRRORED / DECORMAT

LONG RECTANGLE

CONVEX MIRRORED

SUN REFLEX

SUNCONVEX MIRRORED

SUNDIAMOND

SUNSTAINED

SUNMIRRORED / DECORMAT

LIMA DIAMOND MAT

LIMAMIRRORED

LONDON REFLEX

LONDONCONVEX

MIRRORED

LONDON STAINED

LONDONDIAMOND

LONDONMIRRORED / DECORMAT

RECTANGLE REFLEX

RECTANGLE CONVEX

MIRRORED

RECTANGLE DIAMOND

RECTANGLE MIRRORED / DECORMAT

SMALL RECTANGLE DIAMOND

SMALL RECTANGLE

CONVEX MIRRORED

SMALL RECTANGLE MIRRORED / DECORMAT

MODERN REFLEX

MORERNMIRRORED / DECORMAT

SMALL RECTANGLE

REFLEX

ELIPSE REFLEX

ELIPSE DIAMOND/ DECORMAT

ARCH DIAMOND MAT

ARCHMIRRORED

INOX GLAZING TYPES

ALU GLAZING TYPES

BELT INOX REFLEX

BELT INOX MIRRORED / DECORMAT

LADDER INOX REFLEX

LADDER INOX MIRRORED / DECORMAT

ARCH INOX REFLEX

ARCH INOX MIRRORED / DECORMAT

WAVE INOX REFLEX

WAVE INOX MIRRORED / DECORMAT

LIMA`3 INOX REFLEX

LIMA`3 INOX MIRRORED /DECORMAT

LINEA`4 INOX MIRRORED / DECORMAT

MODERN`4 INOX MIRRORED / DECORMAT

MODERN`4 INOX REFLEX

MODERN INOX MIRRORED / DECORMAT

LINEA INOX MIRRORED / DECORMAT

MODERN INOX REFLEX

KARO`3 ALU DECORMAT

KARO`3 ALU MIRRORED

SQUARE`4 ALU DECORMAT

SQUARE`4 ALUMIRRORED

RECTANGLE ALU REFLEX

RECTANGLE ALU DECORMAT

RECTANGLE ALUMIRRORED

STICK

Page 27: Delta doors 1/2013

GLAZING WITH PVC FRAMES

26 | DELTA 2013 DELTA 2013 | 27

GLAZING TYPES

MODERN’4 LIMA

GLAZING with frames of stainles steel / alu

GOTIC REFLEX

GOTIC CONVEX

MIRRORED

GOTIC DIAMOND

GOTICMIRRORED / DECORMAT

LONG RECTANGLE

REFLEX

LONG RECTANGLE DIAMOND

LONG RECTANGLE MIRRORED / DECORMAT

LONG RECTANGLE

CONVEX MIRRORED

SUN REFLEX

SUNCONVEX MIRRORED

SUNDIAMOND

SUNSTAINED

SUNMIRRORED / DECORMAT

LIMA DIAMOND MAT

LIMAMIRRORED

LONDON REFLEX

LONDONCONVEX

MIRRORED

LONDON STAINED

LONDONDIAMOND

LONDONMIRRORED / DECORMAT

RECTANGLE REFLEX

RECTANGLE CONVEX

MIRRORED

RECTANGLE DIAMOND

RECTANGLE MIRRORED / DECORMAT

SMALL RECTANGLE DIAMOND

SMALL RECTANGLE

CONVEX MIRRORED

SMALL RECTANGLE MIRRORED / DECORMAT

MODERN REFLEX

MORERNMIRRORED / DECORMAT

SMALL RECTANGLE

REFLEX

ELIPSE REFLEX

ELIPSE DIAMOND/ DECORMAT

ARCH DIAMOND MAT

ARCHMIRRORED

INOX GLAZING TYPES

ALU GLAZING TYPES

BELT INOX REFLEX

BELT INOX MIRRORED / DECORMAT

LADDER INOX REFLEX

LADDER INOX MIRRORED / DECORMAT

ARCH INOX REFLEX

ARCH INOX MIRRORED / DECORMAT

WAVE INOX REFLEX

WAVE INOX MIRRORED / DECORMAT

LIMA`3 INOX REFLEX

LIMA`3 INOX MIRRORED /DECORMAT

LINEA`4 INOX MIRRORED / DECORMAT

MODERN`4 INOX MIRRORED / DECORMAT

MODERN`4 INOX REFLEX

MODERN INOX MIRRORED / DECORMAT

LINEA INOX MIRRORED / DECORMAT

MODERN INOX REFLEX

KARO`3 ALU DECORMAT

KARO`3 ALU MIRRORED

SQUARE`4 ALU DECORMAT

SQUARE`4 ALUMIRRORED

RECTANGLE ALU REFLEX

RECTANGLE ALU DECORMAT

RECTANGLE ALUMIRRORED

STICK

Page 28: Delta doors 1/2013

DEEP PRESSED RAMAWAVE INOX DECORMAT

DEEP PRESSED RAMALIMA`3 INOX DECORMAT

GLAZING with frames of stainles steel / alu

28 | DELTA 2013 DELTA 2013 | 29

GLAZING with frames of stainles steel / alu

GLAZING WITH FRAMES OF ALUMINUM

INOX Decorative stainless steel glazing frames used for Delta SPECIAL, PREMIUM, MAXIM, ROYAL and GRAND external doors. This type of frames are characterized by a lack connection in the corners of the frame (as in the frame of PVC and ALU) and a lack of install screw caps on the inside of the door (as in the frame of PVC). With INOX frames available glass are: REFLEX, DECORMAT and MIRRORED.NOTE! INOX glazing are not available at the door of dimension 80N (except ROYAL 84S). INOX glazing in PREMIUM 100E doors, are not available in deep pressed RAMA pattern. In the SPECIAL, PREMIUM and GRAND P door models, application of that kind of glazing results loss of IMP certification increased resistance to burglary.

SPECIAL / PREMIUM

SPECIAL / PREMIUM / MAXIM /ROYAL

FLATBELT INOX DECORMAT

ALU Decorative aluminum glazing frames used for Delta SPECIAL, PREMIUM, MAXIM, ROYAL and GRAND exterior doors. This type of frames characterized by a lack of install caps on the inside (as in the frame of PVC). With ALU frames available glass are: REFLEX, DECORMAT and MIRRORED.NOTE! ALU glazing are not available at the door of dimension 80N (except ROYAL 84S). ALU glazing in PREMIUM 100E doors, are not available in deep pressed RAMA pattern. In the SPECIAL, PREMIUM and GRAND P door models, application of that kind of glazing results loss of IMP certification increased resistance to burglary.

SPECIAL /

DEEP PRESSED RAMAARCH INOX DECORMAT

SPECIAL /

DEEP PRESSED RAMASQUARE`4 ALU

PREMIUM 100E /MAXIM

SPECIAL /

DEEP PRESSED RAMARECTANGLE ALU

PREMIUM 100E /MAXIM

SPECIAL /

DEEP PRESSED RAMAKARO`3 ALU

PREMIUM 100E /MAXIM

GLAZING WITH FRAMES OF STAINLES STEEL

GRAND SGRAND SGRAND SGRAND S / GRAND P

DEEP PRESSED RAMA2X SQUARE`4 ALU

DEEP PRESSED RAMA2X RECTANGLE ALU

DEEP PRESSED RAMA2X ARCH INOX

FLAT2X BELT INOX

GLAZING WITH FRAMES OF STAINLES STEEL AND ALUMINUM IN DOUBLE LEAF DOORS

* GRAND S - PRIMARY DOOR LEAF (see a. glazing for SPECIAL)* GRAND P - PRIMARY DOOR LEAF (see a. glazing for PREMIUM)

Non standard glazing (e.g. ALU glazing for doors 80N) are possible to do ONLY after consultation with the sales office and for an extra charge.

Glazing with frames of stainless steel and aluminum are available also in double leaf doors.In the primary door leaf, could be applied the same types like in SPECIAL and PREMIUM models, for the secondary door leaf it is possible to apply glazing only for FLAT door leaf.

SPECIAL / PREMIUMSPECIAL / PREMIUM /MAXIM / ROYAL

SPECIAL / PREMIUM /MAXIM / ROYAL

SPECIAL / SPECIAL /PREMIUM 100E /

MAXIMPREMIUM 100E /

MAXIMPREMIUM 100E /

MAXIM

DEEP PRESSED TRENTOMODERN`4 INOX DECORMAT

FLATLINEA`4 INOX DECORMAT

FLATLINEA`2 INOX DECORMAT

SPECIAL / PREMIUM /MAXIM / ROYAL

FLATLADER INOX DECORMAT

LINEA'4INOX

LEDDERINOX

RECTANGLEALU

SQUARE'4ALU

KARO'3ALU

80N

90E

80N

90E

100E

30

50

SPECIAL

PREMIUM

GRAND S/P *

dimension pattern

color aluminium glazing types

MODERNINOX

BELTINOX

WAVEINOX

LIMA'3INOX

ARCHINOX

WHITE MAHOGANY DARK WALNUT

VENGE GOLDEN OAK

ANTHRACITEGREY

door type

stainless steel glazing type

ROYAL

90EMAXIM

80N90N

FLATTRENTOFLATTRENTORAMAFLATTRENTOFLATTRENTOFLATRAMA pressedFLATRAMAFLATFLATFLATFLAT4 RECTANGLES

NEW! NEW! NEW!

Page 29: Delta doors 1/2013

DEEP PRESSED RAMAWAVE INOX DECORMAT

DEEP PRESSED RAMALIMA`3 INOX DECORMAT

GLAZING with frames of stainles steel / alu

28 | DELTA 2013 DELTA 2013 | 29

GLAZING with frames of stainles steel / alu

GLAZING WITH FRAMES OF ALUMINUM

INOX Decorative stainless steel glazing frames used for Delta SPECIAL, PREMIUM, MAXIM, ROYAL and GRAND external doors. This type of frames are characterized by a lack connection in the corners of the frame (as in the frame of PVC and ALU) and a lack of install screw caps on the inside of the door (as in the frame of PVC). With INOX frames available glass are: REFLEX, DECORMAT and MIRRORED.NOTE! INOX glazing are not available at the door of dimension 80N (except ROYAL 84S). INOX glazing in PREMIUM 100E doors, are not available in deep pressed RAMA pattern. In the SPECIAL, PREMIUM and GRAND P door models, application of that kind of glazing results loss of IMP certification increased resistance to burglary.

SPECIAL / PREMIUM

SPECIAL / PREMIUM / MAXIM /ROYAL

FLATBELT INOX DECORMAT

ALU Decorative aluminum glazing frames used for Delta SPECIAL, PREMIUM, MAXIM, ROYAL and GRAND exterior doors. This type of frames characterized by a lack of install caps on the inside (as in the frame of PVC). With ALU frames available glass are: REFLEX, DECORMAT and MIRRORED.NOTE! ALU glazing are not available at the door of dimension 80N (except ROYAL 84S). ALU glazing in PREMIUM 100E doors, are not available in deep pressed RAMA pattern. In the SPECIAL, PREMIUM and GRAND P door models, application of that kind of glazing results loss of IMP certification increased resistance to burglary.

SPECIAL /

DEEP PRESSED RAMAARCH INOX DECORMAT

SPECIAL /

DEEP PRESSED RAMASQUARE`4 ALU

PREMIUM 100E /MAXIM

SPECIAL /

DEEP PRESSED RAMARECTANGLE ALU

PREMIUM 100E /MAXIM

SPECIAL /

DEEP PRESSED RAMAKARO`3 ALU

PREMIUM 100E /MAXIM

GLAZING WITH FRAMES OF STAINLES STEEL

GRAND SGRAND SGRAND SGRAND S / GRAND P

DEEP PRESSED RAMA2X SQUARE`4 ALU

DEEP PRESSED RAMA2X RECTANGLE ALU

DEEP PRESSED RAMA2X ARCH INOX

FLAT2X BELT INOX

GLAZING WITH FRAMES OF STAINLES STEEL AND ALUMINUM IN DOUBLE LEAF DOORS

* GRAND S - PRIMARY DOOR LEAF (see a. glazing for SPECIAL)* GRAND P - PRIMARY DOOR LEAF (see a. glazing for PREMIUM)

Non standard glazing (e.g. ALU glazing for doors 80N) are possible to do ONLY after consultation with the sales office and for an extra charge.

Glazing with frames of stainless steel and aluminum are available also in double leaf doors.In the primary door leaf, could be applied the same types like in SPECIAL and PREMIUM models, for the secondary door leaf it is possible to apply glazing only for FLAT door leaf.

SPECIAL / PREMIUMSPECIAL / PREMIUM /MAXIM / ROYAL

SPECIAL / PREMIUM /MAXIM / ROYAL

SPECIAL / SPECIAL /PREMIUM 100E /

MAXIMPREMIUM 100E /

MAXIMPREMIUM 100E /

MAXIM

DEEP PRESSED TRENTOMODERN`4 INOX DECORMAT

FLATLINEA`4 INOX DECORMAT

FLATLINEA`2 INOX DECORMAT

SPECIAL / PREMIUM /MAXIM / ROYAL

FLATLADER INOX DECORMAT

LINEA'4INOX

LEDDERINOX

RECTANGLEALU

SQUARE'4ALU

KARO'3ALU

80N

90E

80N

90E

100E

30

50

SPECIAL

PREMIUM

GRAND S/P *

dimension pattern

color aluminium glazing types

MODERNINOX

BELTINOX

WAVEINOX

LIMA'3INOX

ARCHINOX

WHITE MAHOGANY DARK WALNUT

VENGE GOLDEN OAK

ANTHRACITEGREY

door type

stainless steel glazing type

ROYAL

90EMAXIM

80N90N

FLATTRENTOFLATTRENTORAMAFLATTRENTOFLATTRENTOFLATRAMA pressedFLATRAMAFLATFLATFLATFLAT4 RECTANGLES

NEW! NEW! NEW!

Page 30: Delta doors 1/2013

FANLIGHTS

30 | DELTA 2013 DELTA 2013 | 31

DECORATIVE PANELS for interior entrance doors

In cooperation with Polish internal door manufacturer DRE company from Elblag, we introduce for sale additional decorative panels in two colors DRE - Cell Decor: golden oak rib and dark walnut rib.

The 4 mm thick MDF panel is an additional element, possible to establish with Delta Special, PREMIUM or DE LUXE doors, but only for internal doors, apartment doors, measuring 80N and 90E, and in two versions: FLAT and TRENTO pressed pattern.Perfectly harmonize with interior door of DRE in the two most popular colors.

Both sides established door panels increase the acoustic insulation, so important for the front door to the apartment.

Decorative panels are installed to the door leaf with steel profiles in golden oak or dark walnut color, like the door frames of ourcompany.

NOTE!!The DRE decorative panels colors - Cell Decor golden oak rib and dark walnut rib, are slightly different from the color of fixing profiles and door frames. Before buying, please check the existingcolor differences between the panels and door frames.

At the door with decorative panels is not possible to install opening limiter.

Doors with decorative panel can be installed only with threshold made of solid oak of P or PD profile.

DELTA doors with decorative panels can be cut to 5 cm by the manufacturer.

FLAT Decorative panel – golden oak rib TRENTO Decorative panel – golden oak rib

FLAT Decorative panel – dark walnut rib TRENTO Decorative panel – dark walnut rib

The upper and side fanlights are designated for customers who wantsto inlet more light intothey home or office interior. Fanlights can apply to the Delta SPECIAL, PREMIUM and DE LUXE external doors, While the Delta GRAND double leaf doors can only be used with side fanlight. Due to the risk of glass breaking,fanlights are designated for rooms with low or average risk of burglary. In the modelsSPECIAL, PREMIUM and GRAND Pdoors, with fanlights results loss of IMP certification increased resistance to burglary.

The frame of the fanlightsis made of steel sheet 1.5 mm in the color of the door leaf. The doors must be installed with the frame profile PD150 or PDT150. Glass of the fanlights is 24 mm thick, available in 2 version: in standard:reinforced P2 glass with reflex, and the optionalfor extra charge is reinforced P2 glass with mirrored.The upper fanlights are available in one size, applies to single 90E door.The side fanlights are available in two dimensions. The available fanlights dimensions are in the table below.

TYPE OF FANLIGHTS EXTERNAL DIMENSION COLOR

Upper fanlight 992 x 400 mm anthracite grey, dark walnut, golden oak

Side fanlight 2075 x 300 mm

Side fanlight 2075 x 500 mm

anthracite grey, dark walnut, golden oak

anthracite grey, dark walnut, golden oak

NOTE!• Assumed distance between the lower edge of the wings, and the finished floor level is 10 - 15 mm.• The door frame is designated for installation on a concrete slab, and not on the a finished, ready floor• The fanlight frame is 15 mm shorter than door frame, is designated to install on the finished ready floor• The bottom side of the fan light must be insulated from inside and outside, with silicone material that there was no rain water penetration to the interior.• Dimension tolerance according in EN norm is: up to 1m +/- 1mm, over 1m: +/-2 mm.

ALU

2100

15

2090

2037

Connection of the fanlight frame parts from outside

Connection of the fanlight frame parts from inside

Installation screw cap

Connection of the fanlight frame parts with the door frame parts

nominaldistance

NEW!!! NEW!!!

Level “0” of floor

Level “0” of concrete base

Page 31: Delta doors 1/2013

FANLIGHTS

30 | DELTA 2013 DELTA 2013 | 31

DECORATIVE PANELS for interior entrance doors

In cooperation with Polish internal door manufacturer DRE company from Elblag, we introduce for sale additional decorative panels in two colors DRE - Cell Decor: golden oak rib and dark walnut rib.

The 4 mm thick MDF panel is an additional element, possible to establish with Delta Special, PREMIUM or DE LUXE doors, but only for internal doors, apartment doors, measuring 80N and 90E, and in two versions: FLAT and TRENTO pressed pattern.Perfectly harmonize with interior door of DRE in the two most popular colors.

Both sides established door panels increase the acoustic insulation, so important for the front door to the apartment.

Decorative panels are installed to the door leaf with steel profiles in golden oak or dark walnut color, like the door frames of ourcompany.

NOTE!!The DRE decorative panels colors - Cell Decor golden oak rib and dark walnut rib, are slightly different from the color of fixing profiles and door frames. Before buying, please check the existingcolor differences between the panels and door frames.

At the door with decorative panels is not possible to install opening limiter.

Doors with decorative panel can be installed only with threshold made of solid oak of P or PD profile.

DELTA doors with decorative panels can be cut to 5 cm by the manufacturer.

FLAT Decorative panel – golden oak rib TRENTO Decorative panel – golden oak rib

FLAT Decorative panel – dark walnut rib TRENTO Decorative panel – dark walnut rib

The upper and side fanlights are designated for customers who wantsto inlet more light intothey home or office interior. Fanlights can apply to the Delta SPECIAL, PREMIUM and DE LUXE external doors, While the Delta GRAND double leaf doors can only be used with side fanlight. Due to the risk of glass breaking,fanlights are designated for rooms with low or average risk of burglary. In the modelsSPECIAL, PREMIUM and GRAND Pdoors, with fanlights results loss of IMP certification increased resistance to burglary.

The frame of the fanlightsis made of steel sheet 1.5 mm in the color of the door leaf. The doors must be installed with the frame profile PD150 or PDT150. Glass of the fanlights is 24 mm thick, available in 2 version: in standard:reinforced P2 glass with reflex, and the optionalfor extra charge is reinforced P2 glass with mirrored.The upper fanlights are available in one size, applies to single 90E door.The side fanlights are available in two dimensions. The available fanlights dimensions are in the table below.

TYPE OF FANLIGHTS EXTERNAL DIMENSION COLOR

Upper fanlight 992 x 400 mm anthracite grey, dark walnut, golden oak

Side fanlight 2075 x 300 mm

Side fanlight 2075 x 500 mm

anthracite grey, dark walnut, golden oak

anthracite grey, dark walnut, golden oak

NOTE!• Assumed distance between the lower edge of the wings, and the finished floor level is 10 - 15 mm.• The door frame is designated for installation on a concrete slab, and not on the a finished, ready floor• The fanlight frame is 15 mm shorter than door frame, is designated to install on the finished ready floor• The bottom side of the fan light must be insulated from inside and outside, with silicone material that there was no rain water penetration to the interior.• Dimension tolerance according in EN norm is: up to 1m +/- 1mm, over 1m: +/-2 mm.

ALU

2100

15

2090

2037

Connection of the fanlight frame parts from outside

Connection of the fanlight frame parts from inside

Installation screw cap

Connection of the fanlight frame parts with the door frame parts

nominaldistance

NEW!!! NEW!!!

Level “0” of floor

Level “0” of concrete base

Page 32: Delta doors 1/2013

FITTINGS

32 | DELTA 2013

SATIN NICKEL

SATIN NICKEL ANTIC BRASS

SATIN NICKEL ANTIC BRASS Fittings with OLIVIA handle (handle, Delta JK cylinder and T1 rosette ) are standard accessoriesfor Delta SPECIAL doors.

Fittings as an option at extra charge - see page 7,19 or 22

Fittings with ANNA handle (handle, Delta JK cylinder and T1 rosette ) are standard accessoriesfor Delta UNIVERSAL doors.

Fittings as an option at extra charge - see page 5

Fittings with TANIA handle(handle and Delta JKcylinder) are optional accessories for ECONOMIC doors.

The door leaf is equipped with a standard hinge that fits into most of the standard frames on the market.

STANDARD

DELTA 2013 | 33

SATIN NICKEL Fittings with VENUS handle (handle, Delta GD6, JKG cylinder and T4/L rosette ) are standard accessoriesfor Delta DE LUXE and for Delta ROYAL

doors in stainless steel INOX version. Fittings as an option at extra charge - see page 11 or 13

ECONOMIC

UNIVERSAL

SPECIAL

/ G

RAND S

/ E

NTER S

/ M

AXIM

PREMIUM /

MAGNUM /

GRAND P

DE L

UXE /

ROYAL

STANDARD

OPTIONAL

STANDARDOPTIONAL

OPTIONAL

OPENING LIMITER

SATIN NICKEL ANTIC BRASS

STANDARDOPTIONAL

Fittings with CARMEN handle (handle, Delta GD6, JKG cylinder and T4 rosette ) are standard accessoriesfor Delta PREMIUM doors. Fittings as an option at extra charge - see

page 9,19 or 21

STANDARD

Knob handle KLARA is optional accessory for all DELTA doors, except DELTA ECONOMIC.Available color Satin nickel.

Knob handle ANETA is optional accessory for all DELTA doors, except DELTA ECONOMIC.Available color Satin nickel and Antic brass.

OPTIONAL

KNOB H

ANDLE

KLA

RA

OPTIONAL

KNOB H

ANDLE

KLA

RA

OPTIONAL

OPTIONAL

SATIN NICKEL

OPTIONAL

Fittings with KINGA handle are only optional accessoriesfor Delta PREMIUM, DE LUXE MAGNUM and GRAND P doors.

OPTIONAL

KIN

GA H

ANDLE

Fittings with TAMARA handle are only optional accessories for Delta SPECIAL, PREMIUM, and GRAND doors. Depending on

door model can be used DELTA T4 rosette

OPTIONAL

TAMARA H

ANDLE

SATIN NICKEL ANTIC BRASS

OPTIONALOPTIONAL

NOTE!! All fittings require cleaning and periodic care, especially as they are in external doors exposed to weather conditions. Care details can be found on the 2.page of the warranty card attached to the DELTA doors.

OPTIONAL

OUTSIDE INSIDE

OUTSIDE INSIDE

OUTSIDE INSIDE

OUTSIDE INSIDE

OUTSIDE INSIDE

OUTSIDE INSIDE

OUTSIDE INSIDE

OUTSIDE INSIDE OUTSIDE INSIDE

Door viewer

Protective rosette

DELTA T1

Cylinder DELTA JK with knob

Escutcheon ANNA

Handle ANNA

Cylinder DELTA JK

Door viewer

Protective rosette DELTA T4/L, class 4

Cylinder DELTA JK, with knob

Escutcheon CARMEN

Handle VENUS

Certified cylinder

DELTA GD6

Opening limiter (optional)

Door viewer

Protective rosette DELTA T4, class 4

Cylinder DELTA JK with knob

Escutcheon CARMEN

Handle CARMEN

Certified cylinder

DELTA GD6

Opening limiter (optional)

Door viewer

Protective rosette DELTA T1 (optional DELTA T4 class 4)

Cylinder DELTA JK with knob

Escutcheon OLIVIA

Handle OLIVIA

Cylinder DELTA JKZ

class 3

Opening limiter (optional)

Handle TANIA

Cylinder DELTA JK Cylinder DELTA JK

Handle TANIA

Escutcheon CARMEN

Handle KINGA

Protective rosette DELTA T4, class 4

Opening limiter (optional)

Escutcheon TAMARA

Handle TAMARA

Protective rosette DELTA T1 RECTANGLE

Escutcheon CARMEN

KNOB Handle KLARA

Protective rosette DELTA T4

Handle KINGA

Opening limiter (optional)

Escutcheon ANNA

KNOB Handle ANETA

Protective rosette DELTA T1

Handle ANNA

OPTIONAL

OPENING LIMITER

OPTIONAL

OPENING LIMITER

Page 33: Delta doors 1/2013

FITTINGS

32 | DELTA 2013

SATIN NICKEL

SATIN NICKEL ANTIC BRASS

SATIN NICKEL ANTIC BRASS Fittings with OLIVIA handle (handle, Delta JK cylinder and T1 rosette ) are standard accessoriesfor Delta SPECIAL doors.

Fittings as an option at extra charge - see page 7,19 or 22

Fittings with ANNA handle (handle, Delta JK cylinder and T1 rosette ) are standard accessoriesfor Delta UNIVERSAL doors.

Fittings as an option at extra charge - see page 5

Fittings with TANIA handle(handle and Delta JKcylinder) are optional accessories for ECONOMIC doors.

The door leaf is equipped with a standard hinge that fits into most of the standard frames on the market.

STANDARD

DELTA 2013 | 33

SATIN NICKEL Fittings with VENUS handle (handle, Delta GD6, JKG cylinder and T4/L rosette ) are standard accessoriesfor Delta DE LUXE and for Delta ROYAL

doors in stainless steel INOX version. Fittings as an option at extra charge - see page 11 or 13

ECONOMIC

UNIVERSAL

SPECIAL

/ G

RAND S

/ E

NTER S

/ M

AXIM

PREMIUM /

MAGNUM /

GRAND P

DE L

UXE /

ROYAL

STANDARD

OPTIONAL

STANDARDOPTIONAL

OPTIONAL

OPENING LIMITER

SATIN NICKEL ANTIC BRASS

STANDARDOPTIONAL

Fittings with CARMEN handle (handle, Delta GD6, JKG cylinder and T4 rosette ) are standard accessoriesfor Delta PREMIUM doors. Fittings as an option at extra charge - see

page 9,19 or 21

STANDARD

Knob handle KLARA is optional accessory for all DELTA doors, except DELTA ECONOMIC.Available color Satin nickel.

Knob handle ANETA is optional accessory for all DELTA doors, except DELTA ECONOMIC.Available color Satin nickel and Antic brass.

OPTIONAL

KNOB H

ANDLE

KLA

RA

OPTIONAL

KNOB H

ANDLE

KLA

RA

OPTIONAL

OPTIONAL

SATIN NICKEL

OPTIONAL

Fittings with KINGA handle are only optional accessoriesfor Delta PREMIUM, DE LUXE MAGNUM and GRAND P doors.

OPTIONAL

KIN

GA H

ANDLE

Fittings with TAMARA handle are only optional accessories for Delta SPECIAL, PREMIUM, and GRAND doors. Depending on

door model can be used DELTA T4 rosette

OPTIONAL

TAMARA H

ANDLE

SATIN NICKEL ANTIC BRASS

OPTIONALOPTIONAL

NOTE!! All fittings require cleaning and periodic care, especially as they are in external doors exposed to weather conditions. Care details can be found on the 2.page of the warranty card attached to the DELTA doors.

OPTIONAL

OUTSIDE INSIDE

OUTSIDE INSIDE

OUTSIDE INSIDE

OUTSIDE INSIDE

OUTSIDE INSIDE

OUTSIDE INSIDE

OUTSIDE INSIDE

OUTSIDE INSIDE OUTSIDE INSIDE

Door viewer

Protective rosette

DELTA T1

Cylinder DELTA JK with knob

Escutcheon ANNA

Handle ANNA

Cylinder DELTA JK

Door viewer

Protective rosette DELTA T4/L, class 4

Cylinder DELTA JK, with knob

Escutcheon CARMEN

Handle VENUS

Certified cylinder

DELTA GD6

Opening limiter (optional)

Door viewer

Protective rosette DELTA T4, class 4

Cylinder DELTA JK with knob

Escutcheon CARMEN

Handle CARMEN

Certified cylinder

DELTA GD6

Opening limiter (optional)

Door viewer

Protective rosette DELTA T1 (optional DELTA T4 class 4)

Cylinder DELTA JK with knob

Escutcheon OLIVIA

Handle OLIVIA

Cylinder DELTA JKZ

class 3

Opening limiter (optional)

Handle TANIA

Cylinder DELTA JK Cylinder DELTA JK

Handle TANIA

Escutcheon CARMEN

Handle KINGA

Protective rosette DELTA T4, class 4

Opening limiter (optional)

Escutcheon TAMARA

Handle TAMARA

Protective rosette DELTA T1 RECTANGLE

Escutcheon CARMEN

KNOB Handle KLARA

Protective rosette DELTA T4

Handle KINGA

Opening limiter (optional)

Escutcheon ANNA

KNOB Handle ANETA

Protective rosette DELTA T1

Handle ANNA

OPTIONAL

OPENING LIMITER

OPTIONAL

OPENING LIMITER

Page 34: Delta doors 1/2013

STAINLESS STEEL FITTINGS

ELECTROMAGNETIC BLOCKADE

T4 ROSETTEBOTTOM LEAF CLOSING PROFILEBOTTOM DRIP PROFILE

DOOR CLOSER

Delta T4 protective rosette, is an 4Class,anti-boring rosette, which protects the lock and cylinder against breaking out, manipulation and drilling.T4 is a standard accessory in DE LUXE, PREMIUM, MAGNUM, GRAND Pand ROYAL doors, and is an optional for an extra charge in SPECIAL, GRAND S and ENTER S model.

The leaf closing profile is assumed at the bottom of the door leaf in case of self-shortened or when the door is exposed to hard conditions of use (frequent opening, warehouses, etc.). Closing profile prevents waving and delamination in the bottom of the door, reinforces and stabilizes the structure of the door leaf.

The drip profile is designated for the external doors which are opening inside, to protect of the interior in case of rain against the water ingress.During the install the upper edge of the profile must be sealed with colorless silicone.

Door closer DELTA OUDE available in silver and white color. Can by apply in MAGNUM and ENTER S doors.

Electromagnetic blockade 12V AC/DC can by apply in frame P55, PU and PD profiles. Recommended for ENTER-S main entrance doors to apartment buildings.

AUTOMATIC DROP THRESHOLDDELTA FIREPROOF DOOR VIEWERCYKLOP DOOR VIEWERSTANDARD DOOR VIEWER

The standard door setsinclude the standard door viewer except the ECONOMIC, MAGNUM and doors with glazing systems. The angle of view without distortion is 120°.

CYKLOP fireproof door viewer is an optional accessory for the doors, recommended for MAGNUM series, with 160° angle of view without distortion.

DELTA fireproof door viewer is an optional accessory for the doors, recommended for MAGNUM series, with 120° angle of view without distortion.

The drop threshold is an optional accessory,recommended for MAGNUM series. The drop threshold after closing the door falling down and sealing the bottom across the door leaf width.

DOOR CLOSER HINGES

Can by apply in MAGNUM and ENTER S doors.

34 | DELTA 2013

SECURITY CYLINDER GD6 with multi-key system

Can by apply in UNIVERSAL, SPECIAL, PREMIUM, DE LUXE, GRAND and MAGNUM doors.

ACCESSORIES

DELTA 2013 | 35

VENUS INOX

CARMEN INOX

OLIVIA INOX

DELTA INOX stainless steel fittings are designated and recommended for DELTA external doors.

They are characterized by high resistance to weather conditions and not require periodic maintenance, as in the case of standard fittings.

The fitting set include: VENUS, CARMEN, TAMARA or OLIVIA handles, daily lock escutcheon and escutcheon with protective rosette for main lock.The cylinders and opening limiter knob (mounted inside of the door) are not made of stainless steel.

VENUS INOX fittings are standard accessories for ROYAL and PRESTIGE doors.All type of INOX fittings are optional accessories for an extra charge for SPECIAL, PREMIUM, DE LUXE, MAXIM, GRAND and ENTER S external doors.INOX Fittings are very close reproduction of standard fittings, available color is only the natural stainless steel.

DELTA INOX Handrail can be used for SPECIAL, PREMIUM, DE LUXE, MAXIM, ROYAL and GRAND external doors. Install of the INOX Handrail is on the standard place of the handle and the upper escutcheon, so it does not require any additional interference in the door leaf.From the inside is a TAMARA`2 INOX handle and escutcheon.The door Opening from the outside is done with a main lock key.

STAINLESS STEEL FITTINGS

OPTIONAL

STANDARD

OPTIONAL OPTIONAL

STANDARD

OPTIONAL OPTIONAL OPTIONAL OPTIONAL

OPTIONAL OPTIONAL OPTIONAL

HANDRAIL INOX

TAMARA'2 INOX

OPTIONAL

OPTIONAL

OPTIONAL

OPTIONAL

OPEN LIMITER

Can be apply in SPECIAL, PREMIUM, DE LUXE and MAGNUM doors. It is allows to open the door at about 7cm.

OPTIONAL

NEW !

Page 35: Delta doors 1/2013

STAINLESS STEEL FITTINGS

ELECTROMAGNETIC BLOCKADE

T4 ROSETTEBOTTOM LEAF CLOSING PROFILEBOTTOM DRIP PROFILE

DOOR CLOSER

Delta T4 protective rosette, is an 4Class,anti-boring rosette, which protects the lock and cylinder against breaking out, manipulation and drilling.T4 is a standard accessory in DE LUXE, PREMIUM, MAGNUM, GRAND Pand ROYAL doors, and is an optional for an extra charge in SPECIAL, GRAND S and ENTER S model.

The leaf closing profile is assumed at the bottom of the door leaf in case of self-shortened or when the door is exposed to hard conditions of use (frequent opening, warehouses, etc.). Closing profile prevents waving and delamination in the bottom of the door, reinforces and stabilizes the structure of the door leaf.

The drip profile is designated for the external doors which are opening inside, to protect of the interior in case of rain against the water ingress.During the install the upper edge of the profile must be sealed with colorless silicone.

Door closer DELTA OUDE available in silver and white color. Can by apply in MAGNUM and ENTER S doors.

Electromagnetic blockade 12V AC/DC can by apply in frame P55, PU and PD profiles. Recommended for ENTER-S main entrance doors to apartment buildings.

AUTOMATIC DROP THRESHOLDDELTA FIREPROOF DOOR VIEWERCYKLOP DOOR VIEWERSTANDARD DOOR VIEWER

The standard door setsinclude the standard door viewer except the ECONOMIC, MAGNUM and doors with glazing systems. The angle of view without distortion is 120°.

CYKLOP fireproof door viewer is an optional accessory for the doors, recommended for MAGNUM series, with 160° angle of view without distortion.

DELTA fireproof door viewer is an optional accessory for the doors, recommended for MAGNUM series, with 120° angle of view without distortion.

The drop threshold is an optional accessory,recommended for MAGNUM series. The drop threshold after closing the door falling down and sealing the bottom across the door leaf width.

DOOR CLOSER HINGES

Can by apply in MAGNUM and ENTER S doors.

34 | DELTA 2013

SECURITY CYLINDER GD6 with multi-key system

Can by apply in UNIVERSAL, SPECIAL, PREMIUM, DE LUXE, GRAND and MAGNUM doors.

ACCESSORIES

DELTA 2013 | 35

VENUS INOX

CARMEN INOX

OLIVIA INOX

DELTA INOX stainless steel fittings are designated and recommended for DELTA external doors.

They are characterized by high resistance to weather conditions and not require periodic maintenance, as in the case of standard fittings.

The fitting set include: VENUS, CARMEN, TAMARA or OLIVIA handles, daily lock escutcheon and escutcheon with protective rosette for main lock.The cylinders and opening limiter knob (mounted inside of the door) are not made of stainless steel.

VENUS INOX fittings are standard accessories for ROYAL and PRESTIGE doors.All type of INOX fittings are optional accessories for an extra charge for SPECIAL, PREMIUM, DE LUXE, MAXIM, GRAND and ENTER S external doors.INOX Fittings are very close reproduction of standard fittings, available color is only the natural stainless steel.

DELTA INOX Handrail can be used for SPECIAL, PREMIUM, DE LUXE, MAXIM, ROYAL and GRAND external doors. Install of the INOX Handrail is on the standard place of the handle and the upper escutcheon, so it does not require any additional interference in the door leaf.From the inside is a TAMARA`2 INOX handle and escutcheon.The door Opening from the outside is done with a main lock key.

STAINLESS STEEL FITTINGS

OPTIONAL

STANDARD

OPTIONAL OPTIONAL

STANDARD

OPTIONAL OPTIONAL OPTIONAL OPTIONAL

OPTIONAL OPTIONAL OPTIONAL

HANDRAIL INOX

TAMARA'2 INOX

OPTIONAL

OPTIONAL

OPTIONAL

OPTIONAL

OPEN LIMITER

Can be apply in SPECIAL, PREMIUM, DE LUXE and MAGNUM doors. It is allows to open the door at about 7cm.

OPTIONAL

NEW !

Page 36: Delta doors 1/2013

CONNECTION OF THE FRAME PARTS

(an angle of 45°)

DOOR FRAMES

36 | DELTA 2013

THRESHOLDS

DELTA 2013 | 37

PVC P55 BROWN or GOLDEN OAKREFERS TO FRAME: P55, PU

ALU UNIREFERS TO FRAME: UNI, UNI NC

ALU D150REFERS TO FRAME:PD, PN, D55/150

SOLID OAK P55REFERS TO FRAME: P55, PU

NC REFERS TO: ECONOMIC

STANDARD90

80

80N

90E

80N

90E

PVC UNI BROWN or GOLDEN OAK or DARK WOODREFERS TO FRAME: UNI, UNI NC

80

90E

80

90E

120E

100E

90E

80N

140E

ALU P55REFERS TO FRAME: P55, PU

SOLID OAK UNIREFERS TO FRAME: UNI, UNI NC

SOLID OAK D150REFERS TO FRAME: PD, PN, D55/150

80N

90E

120E

100E

90E

80N

140E

80

90E

P55REFERS TO: SPECIAL, PREMIUM, DE LUXE

STANDARD90E

80N

PUREFERS TO: SPECIAL, PREMIUM, DE LUXE, GRAND, ENTER, MAGNUM

OPTIONAL

PN150 REFERS TO: SPECIAL, PREMIUM, DE LUXE (A. ONLY AT SIZE 80)

80N

OPTIONAL

PD150REFERS TO: SPECIAL, PREMIUM, DE LUXE, GRAND, ENTER, MAGNUM

120E

100E

90E

80N

140E

OPTIONAL

PDT150REFERS TO: SPECIAL, PREMIUM, DE LUXE, GRAND, ENTER

OPTIONAL120E

90E

140E

PMT150REFERS TO: ROYAL

OPTIONAL90E

PM150REFERS TO: ROYAL

STANDARD90E

80N

INSTALL SCREW CAP

STEEL PLASTIC

DELTA steel frames are made of high quality galvanized steel sheet thickness of 1.2 or 1.5 mm, covered with PVC laminate in color of the door leaf.

Low outdoor temperatures, high h u m i d i t y a n d p o o r ventilationinside the building can cause frost or sweating on steel frames made of one-piece p r o f i l e . To r e d u c e t h i s phenomenon DELTA, first in Poland, introduced the warm steel frames with a thermal barrier (PMT and PDT) inspired by aluminum profiles.

Steel frames with a thermal barrier c a n b e u s e d fo r S P E C I A L , PREMIUM, DE LUXE, ENTER S, GRANDand ROYAL external doors.

For these kind of frames we offer a n u m b e r o f t h re s h o l d s w i t h additional gasket (see page 33). Frames for MAXIM and PRESTIGE doors are described on pages 15 and 17.

DESCRIPTIONUNIREFERS TO: UNIVERSAL

STANDARD80

90E

UNI NC REFERS TO: UNIVERSAL (A. ONLY AT SIZE 80)

STANDARD80

DELTA thresholdswith gasket are made of three types of materials (PVC, ALU, wood) depending on the type of application. PVC thresholds can be used for internalor external doors. Their advantage is a good thermal insulation and similar color to the door leafs and frames from the DELTA offer. They apply only to the frames of UNI, UNI NC, P55 and PUprofile.ALU (aluminum) thresholds can be used for internalor external doors. Their advantage is high visual aesthetics and resistance to mechanical damage and abrasion. They apply to all types of frames from the DELTA offer.Oak wooden thresholds can be used for internalor external doors, but except the external door opening inside. Blend well with floors made of natural woodenmaterials. They apply to all types of frames from the DELTA offer.

DESCRIPTION

120E

100E

90E

80N

140E

PVC/ALU ROYAL PROFILE 2REFERS TO FRAME: PM, PMT150

80N

90N

90E

PVC/ALU ROYAL PROFILE 1REFERS TO FRAME: PM, PMT150

80N

90N

90E

NEW ! NEW !

NEW !

NEW ! NEW !

Page 37: Delta doors 1/2013

CONNECTION OF THE FRAME PARTS

(an angle of 45°)

DOOR FRAMES

36 | DELTA 2013

THRESHOLDS

DELTA 2013 | 37

PVC P55 BROWN or GOLDEN OAKREFERS TO FRAME: P55, PU

ALU UNIREFERS TO FRAME: UNI, UNI NC

ALU D150REFERS TO FRAME:PD, PN, D55/150

SOLID OAK P55REFERS TO FRAME: P55, PU

NC REFERS TO: ECONOMIC

STANDARD90

80

80N

90E

80N

90E

PVC UNI BROWN or GOLDEN OAK or DARK WOODREFERS TO FRAME: UNI, UNI NC

80

90E

80

90E

120E

100E

90E

80N

140E

ALU P55REFERS TO FRAME: P55, PU

SOLID OAK UNIREFERS TO FRAME: UNI, UNI NC

SOLID OAK D150REFERS TO FRAME: PD, PN, D55/150

80N

90E

120E

100E

90E

80N

140E

80

90E

P55REFERS TO: SPECIAL, PREMIUM, DE LUXE

STANDARD90E

80N

PUREFERS TO: SPECIAL, PREMIUM, DE LUXE, GRAND, ENTER, MAGNUM

OPTIONAL

PN150 REFERS TO: SPECIAL, PREMIUM, DE LUXE (A. ONLY AT SIZE 80)

80N

OPTIONAL

PD150REFERS TO: SPECIAL, PREMIUM, DE LUXE, GRAND, ENTER, MAGNUM

120E

100E

90E

80N

140E

OPTIONAL

PDT150REFERS TO: SPECIAL, PREMIUM, DE LUXE, GRAND, ENTER

OPTIONAL120E

90E

140E

PMT150REFERS TO: ROYAL

OPTIONAL90E

PM150REFERS TO: ROYAL

STANDARD90E

80N

INSTALL SCREW CAP

STEEL PLASTIC

DELTA steel frames are made of high quality galvanized steel sheet thickness of 1.2 or 1.5 mm, covered with PVC laminate in color of the door leaf.

Low outdoor temperatures, high h u m i d i t y a n d p o o r ventilationinside the building can cause frost or sweating on steel frames made of one-piece p r o f i l e . To r e d u c e t h i s phenomenon DELTA, first in Poland, introduced the warm steel frames with a thermal barrier (PMT and PDT) inspired by aluminum profiles.

Steel frames with a thermal barrier c a n b e u s e d fo r S P E C I A L , PREMIUM, DE LUXE, ENTER S, GRANDand ROYAL external doors.

For these kind of frames we offer a n u m b e r o f t h re s h o l d s w i t h additional gasket (see page 33). Frames for MAXIM and PRESTIGE doors are described on pages 15 and 17.

DESCRIPTIONUNIREFERS TO: UNIVERSAL

STANDARD80

90E

UNI NC REFERS TO: UNIVERSAL (A. ONLY AT SIZE 80)

STANDARD80

DELTA thresholdswith gasket are made of three types of materials (PVC, ALU, wood) depending on the type of application. PVC thresholds can be used for internalor external doors. Their advantage is a good thermal insulation and similar color to the door leafs and frames from the DELTA offer. They apply only to the frames of UNI, UNI NC, P55 and PUprofile.ALU (aluminum) thresholds can be used for internalor external doors. Their advantage is high visual aesthetics and resistance to mechanical damage and abrasion. They apply to all types of frames from the DELTA offer.Oak wooden thresholds can be used for internalor external doors, but except the external door opening inside. Blend well with floors made of natural woodenmaterials. They apply to all types of frames from the DELTA offer.

DESCRIPTION

120E

100E

90E

80N

140E

PVC/ALU ROYAL PROFILE 2REFERS TO FRAME: PM, PMT150

80N

90N

90E

PVC/ALU ROYAL PROFILE 1REFERS TO FRAME: PM, PMT150

80N

90N

90E

NEW ! NEW !

NEW !

NEW ! NEW !

Page 38: Delta doors 1/2013

ELECTROMECHANICAL HANDLES

38 | DELTA 2013

Ava

ilab

le c

olo

r: S

atin

nic

kel a

nd

an

tic

bra

ss

DELTA LS 8008 electromechanical handle and lock

HOTEL SYSTEM

DELTA 2013 | 39

DELTA LS 8015 handle with DD6H/Z mechanical mortise lock

Presented hotel locking system is designated for hotels, guest houses, sanatoriums, etc., it uses proximity cards, programmed with encoder. This system can handle rooms located even in several buildings. This kind of solution provides the full functionality of the system: operators can be recorded at three different levels of permissions, issue cards for guests, cleaning staff, and special cards (multiple access, card blocking, evacuation, etc.). The system provides energy saver socket to save electricity in the room during the guest absence. Delta LS 8008, LS 8015 Electromechanical handle and Delta LS 8008 fittings have been tested in the Fire Research Division of ITB and can be applied on fire-rated doors Delta MAGNUM EI 30 and also have been tested in the laboratory of Telecommunication and Radio Engineering Institute.ATTENTION! The order for the hotel system should always contain the door opening side and direction (by drawing page nr. 2)

Ava

ilab

le c

olo

r: s

tain

less

ste

el.

DELTA GI2324 Electromechanical handle systems with digital code and proximity card

DELTA GZF Electromechanical handle systems with digital code and fingerprints

Electromechanical handle systems with digital code, proximity card or fingerprints are particularly recommended for houses, offices and other applications where you do not want to carry a key, and there is no risk of burglary. The system disconnects only the handle lever from lock`s latch, and connects it again upon positive verification. The system can be switched off permanently or temporarily (permanently open function) for example, during family events. At any time it is possible to open the door from the outside using a key of the handle lock or from inside with the handle. Closing the handle lock with key makes blockingthe mechanical bolts which disallows the door open without a handle lock key. DELTA electromechanical handles can be applied to any DELTA door model and the most of other manufacturers doors on the market.

NOTE! NOTE! The order for the electromechanical handles should always contain the door opening side and direction (by drawing page nr. 2)

Ava

ilab

le c

olo

r: S

atin

nic

kel a

nd

an

tic

bra

ss.

• working in offline mode, without any additional wiring • audit of the last operations• programmable, lasting internal memory• memory of the last 250 operations• solid metal construction, resistant to vandalism• internal clock• resistance to forgery• intuitive to use• if the card lost or stolen you can receive a new card, there is no need

to exchange the lock• battery life of about 2 years (4 x AA)• 24 months warranty

ADVANTAGES OF THE HOTEL SYSTEM

ENCODER

ACCESS CONTROL READER

SWITCH FOR ACCESS CONTROL READER

HANDSET

DELTA LS 8015 handle with DD6H/Z mechanical mortise lockDELTA LS 8008

electromechanical handle and lock ENERGY

SAVER

DIMENSION 177 X 74 X 32mm

WEIGHT 3 kg

MATERIAL STEEL

OPERATING TEMPERATURE from -10 C to +55C°C

PERMISSIBLE HUMIDITY 15% - 95%

CARD TYPE ID type EM

POWER SUPPLY VOLTAGE 6V (4 x AAA BATTERY)

POWER CONSUMPTION AT WORK < 0,12mA

POWER CONSUMPTION AT STAND BY < 0,025mA

°

DELTA GI2324 technical description

DIMENSION 200 X 74 X 49 mm

WEIGHT 3 kg

MATERIAL STEEL

OPERATING TEMPERATURE from 0 C to + 55° C

PERMISSIBLE HUMIDITY 20% - 80%

POWER SUPPLY VOLTAGE 6V (4 x AA BATTERY)

POWER CONSUMPTION AT WORK < 200mA

POWER CONSUMPTION AT STAND BY < 0,005mA

°

DELTA GZF technical descriptionFIREPROOF RATE EI30

DIMENSIONS 278 X 81,5 X 35mm

WEIGHT 3,5kg

MATERIAL STAINLESS STEEL

OPERATING TEMPERATURE 0°C to +55°C

DOOR THICKNESS 38 - 78mm

CARD TYPE TEMIC 5557

CARD READING TIME < 2s

STORED RECORDS 250

POWER SUPPLY VOLTAGE 6V (4 X AA BATTERY)

POWER CONSUMPTION AT WORK 200mA

POWER CONSUMPTION AT STAND BY < 0,005mA

MORTISE LOCK ELECTROMECHANICAL

CYLINDER DELTA LS 8008

LS 8008 TECHNICAL SPECIFICATION

Dimensions of LS8008 Electromechanical mortise lock

NOTE! The set not include the rosettes and the cylinder

NOTE! The set not include the rosettes and the cylinder.

REMARK: Prices for the hotel systems (lock and accessories) are calculated individually upon request.

Page 39: Delta doors 1/2013

ELECTROMECHANICAL HANDLES

38 | DELTA 2013

Ava

ilab

le c

olo

r: S

atin

nic

kel a

nd

an

tic

bra

ss

DELTA LS 8008 electromechanical handle and lock

HOTEL SYSTEM

DELTA 2013 | 39

DELTA LS 8015 handle with DD6H/Z mechanical mortise lock

Presented hotel locking system is designated for hotels, guest houses, sanatoriums, etc., it uses proximity cards, programmed with encoder. This system can handle rooms located even in several buildings. This kind of solution provides the full functionality of the system: operators can be recorded at three different levels of permissions, issue cards for guests, cleaning staff, and special cards (multiple access, card blocking, evacuation, etc.). The system provides energy saver socket to save electricity in the room during the guest absence. Delta LS 8008, LS 8015 Electromechanical handle and Delta LS 8008 fittings have been tested in the Fire Research Division of ITB and can be applied on fire-rated doors Delta MAGNUM EI 30 and also have been tested in the laboratory of Telecommunication and Radio Engineering Institute.ATTENTION! The order for the hotel system should always contain the door opening side and direction (by drawing page nr. 2)

Ava

ilab

le c

olo

r: s

tain

less

ste

el.

DELTA GI2324 Electromechanical handle systems with digital code and proximity card

DELTA GZF Electromechanical handle systems with digital code and fingerprints

Electromechanical handle systems with digital code, proximity card or fingerprints are particularly recommended for houses, offices and other applications where you do not want to carry a key, and there is no risk of burglary. The system disconnects only the handle lever from lock`s latch, and connects it again upon positive verification. The system can be switched off permanently or temporarily (permanently open function) for example, during family events. At any time it is possible to open the door from the outside using a key of the handle lock or from inside with the handle. Closing the handle lock with key makes blockingthe mechanical bolts which disallows the door open without a handle lock key. DELTA electromechanical handles can be applied to any DELTA door model and the most of other manufacturers doors on the market.

NOTE! NOTE! The order for the electromechanical handles should always contain the door opening side and direction (by drawing page nr. 2)

Ava

ilab

le c

olo

r: S

atin

nic

kel a

nd

an

tic

bra

ss.

• working in offline mode, without any additional wiring • audit of the last operations• programmable, lasting internal memory• memory of the last 250 operations• solid metal construction, resistant to vandalism• internal clock• resistance to forgery• intuitive to use• if the card lost or stolen you can receive a new card, there is no need

to exchange the lock• battery life of about 2 years (4 x AA)• 24 months warranty

ADVANTAGES OF THE HOTEL SYSTEM

ENCODER

ACCESS CONTROL READER

SWITCH FOR ACCESS CONTROL READER

HANDSET

DELTA LS 8015 handle with DD6H/Z mechanical mortise lockDELTA LS 8008

electromechanical handle and lock ENERGY

SAVER

DIMENSION 177 X 74 X 32mm

WEIGHT 3 kg

MATERIAL STEEL

OPERATING TEMPERATURE from -10 C to +55C°C

PERMISSIBLE HUMIDITY 15% - 95%

CARD TYPE ID type EM

POWER SUPPLY VOLTAGE 6V (4 x AAA BATTERY)

POWER CONSUMPTION AT WORK < 0,12mA

POWER CONSUMPTION AT STAND BY < 0,025mA

°

DELTA GI2324 technical description

DIMENSION 200 X 74 X 49 mm

WEIGHT 3 kg

MATERIAL STEEL

OPERATING TEMPERATURE from 0 C to + 55° C

PERMISSIBLE HUMIDITY 20% - 80%

POWER SUPPLY VOLTAGE 6V (4 x AA BATTERY)

POWER CONSUMPTION AT WORK < 200mA

POWER CONSUMPTION AT STAND BY < 0,005mA

°

DELTA GZF technical descriptionFIREPROOF RATE EI30

DIMENSIONS 278 X 81,5 X 35mm

WEIGHT 3,5kg

MATERIAL STAINLESS STEEL

OPERATING TEMPERATURE 0°C to +55°C

DOOR THICKNESS 38 - 78mm

CARD TYPE TEMIC 5557

CARD READING TIME < 2s

STORED RECORDS 250

POWER SUPPLY VOLTAGE 6V (4 X AA BATTERY)

POWER CONSUMPTION AT WORK 200mA

POWER CONSUMPTION AT STAND BY < 0,005mA

MORTISE LOCK ELECTROMECHANICAL

CYLINDER DELTA LS 8008

LS 8008 TECHNICAL SPECIFICATION

Dimensions of LS8008 Electromechanical mortise lock

NOTE! The set not include the rosettes and the cylinder

NOTE! The set not include the rosettes and the cylinder.

REMARK: Prices for the hotel systems (lock and accessories) are calculated individually upon request.

Page 40: Delta doors 1/2013

Steel doors

Locks

Cylinders

Fittings

Glazing

Accessories

Security doors

Fire-rated doors

External entrance doors

Interior entrance doors

Standard

Certified

Handles

Protective rosettes

Hinges

Reflex

Mirrored

Stained

Decor mat

Thresholds

Opening limiter

Door drip

Door closer

Mortise locks

Multi-point locks

Electronic locks

Hotel locks

New!ROYAL door - thickness 84mm

MAXIM door - thickness 68mm

PRESTIGE door - thickness 88 mm

Fanlights

Decorative panels

Door frame with thermal barrier

Stainless steel fittings

Glazing with stainless steel

and aluminum frames

Edition I/2013

e-mail: [email protected]

40-424 Katowiceul. Magazynowa 21

tel. +48 32 730 36 30+48 32 256 55 36

fax +48 32 256 55 52

www.delta.net.pl

2U = 0,60 W/m KD

PrestigePASSIVE DOORS

POLAND