deutz-fahr 5660 hts climber - marpex-agro. · pdf filewith its new 5660 hts climber,...
TRANSCRIPT
1
DEUTZ-FAHR 5660 HTS CLIMBER
EVOLVING AGRICULTURE.
Prin
ted
in G
erm
any
2 32 3
EVOLVE INTELLIGENTLY.
Prin
ted
in G
erm
any
Prin
ted
in G
erm
any
4 5
The 5 straw walker 5660 HTS Climber makes it possible to work safely on the steep slo-pes typical of Italian hills. Its not exclusve leveling system provides maximum traction and the perfect balance of the combine har-vester allow the operator to take 100 % advantage of its enormous capacity.
Every time high quality work is required, as well as extraordinary power and total re-liability, DEUTZ-FAHR – which has always specialized in harvesting techniques – has the right answer. Farmers and contractors know that DEUTZ-FAHR has state-of-the-art know-how and provides excellent after-sales service.With its new 5660 HTS Climber, DEUTZ-FAHR is pleased to offer a top-of-the-range combine harvester in the hillside combine sector so its customers can obtain a level of productivity that till now has never been seen in this market.
4
FOLLOwING THE pROFILE OF SUCCESS.
5
Cutter bars with planetary operation and cutting widths up to 6.3 meters
Auto-control system for a perfect lateral and longitudinal alignment of the cutting bar
Large threshing system with independent electrical control of the concave
Threshing drum speed variator with electrical regulation – 420-1250 RPM
Rear beater synchronized with threshing drum
Large straw walker
Electrically adjustable turbo-separator with 5 settings for a complete separation and delicate treatment of the straw
Sieving unit with double ventilated step and opposing action sieves
Sieving area of 5,28 m2
High-performance turbine ventilation assembly
Grain tank with capacity of 7,500 liters
Emptying of grain tank from above
DEUTZ Common-Rail with 4 valves per cylinder
Power takeoff on both sides of engine for better power distribution and more compact transmissions
Hydrostatic transmission with 4 speed ranges and 4-wheel drive as a standard feature
Proportional leveling system with lateral compensation of 40 %, longitudinal of 30 % (uphill) and 10 % (downhill)
HERE ARE THE REASonS foR PURCHASInG THE DEUTZ-fAHR CoMbInE HARvESTER:
Prin
ted
in G
erm
any
Prin
ted
in G
erm
any
High-performance cutter bars having a width of 4.80-6.30 m
Large diameter auger and intake teeth arranged in a spiral
High speed planetary drive for greater knife cuts per minute
Short dividers and multiple hydraulic joint for simple and rapid assembly / disassembly of bar
Auto-control system for automatic management of cutting height and lateral inclination of bar
nitrogen filled accumulators for header suspension
ADvAnTAGES
Precisely in difficult harvesting condi-tions is when you want a quality combine harvester to prove its efficiency. Thanks to their unbeatable cutting precision and operation, the bars of the 56 series are also effective when harvesting lod-ged crops. The auto-control system au-tomatically manages the movements of the cutting bars which are up to 6.3 m wide. Cutting height, lateral inclination and bearing pressure on the ground are constantly monitored.
for an ever cleaner cut.The DEUTZ-FAHR tandem cut system, planetary-operated and performing 1,220 cuts per minute, ensures a rapid and precise cut. The bolted blades are heavy-duty and resistant to stones and
other foreign bodies. The reel speed is proportional to the forward speed which provides a consistent and regular regular feed to the cutter bar; the intake auger with a diameter of 610 mm and the teeth arranged into a spiral along the entire width can convey enormous amounts of product to the intake elevator. A powerful electric reverser eliminates overload.
Crop elevator.The elevator of the 5660 HTS Climber allows perfect balance of the combine harvester in all working conditions. Mo-reover its length allows perfect control of the bar even on the steepest downhill tracts.The auger with 16 mm Ø teeth allows you to regulate product flow. Moreover,
because of its sturdiness, it does not require modifications for harvesting corn.The two lifting cylinders with nitrogen shock absorbers can handle heavier equipment and absorb peak loads, whether you are on the field or on the road. This allows working in top comfort while keeping the combine harvester chassis protected.
The skids allow the cutter bar to faithfully follow the contours of the ground and by using the auto-control system, instantly correct the header height.
Thanks to the planetary transmission and a cutting frequency of 1,220 strokes/min, the cutting is always rapid and precise in all kinds of harvesting conditions.
The alternately mounted blades reduce wear and always ensure an optimum cut.
The feeding roller allows a constant flow of product to the elevator even on the steepest downhill slopes and when the straw is short.
The sturdy feed elevator allows you to handle cutting bars up to 6.3 m wide.
The two nitrogen shock absorbers absorb all stresses during work and transportation.
7
HARVESTING HEADERS FOR MAXIMUM pRODUCTIVITY.
6
Prin
ted
in G
erm
any
Prin
ted
in G
erm
any
The sturdy 25,000 kg capacity reduction gears with a high reduction ratio give the combine harvester maximum traction while reducing operating costs.
The standard four wheel drive allows the combine harvester to go uphill in any condition and switches off automatically when going downhill so you are always working in complete safety.
both the leveling and four wheel drive functions are managed by a sole control unit to optimize the operator‘s control over all operations.
9
The exclusive DEUTZ-FAHR leveling sy-stem allows maximum performance on all slopes.The excellent combination of the leveling system, the four-wheel drive and the electronic system that monitors all the functions allows the combine harvester to always reach the maximum of its ca-pacity to the full advantage of yield and low running costs.
The sturdy 25-ton reduction gears have a reduction ratio of 11:1. This minimizes stress on the transmission and reduces fuel consumption.The optimal ratios of the four speed gear-box make it possible to always adapt the forward speed to slope and terrain condi-tions. The hydrostatic drive system, with a pump and a 135 cc motor, allows suf-ficient power to the wheels while keeping a reserve of torque for overcoming the
most difficult slopes. The brakes mounted on the reduction ge-ars allow you to easily slow the combine harvester down on steep downhill tracts and ensure maximum safety in all con-ditions.
Transversal leveling 40 %; Longitudinal leveling: 30 % (uphill) and 10 % (downhill)
Proportional leveling system to provide maximum comfort
Automatic four-wheel drive
one control unit for traction and leveling
Pump and 135 cc hydrostatic engine LEVELING. ADvAnTAGES
8
Prin
ted
in G
erm
any
Prin
ted
in G
erm
any
With the 56 series of combine har-vesters, DEUTZ-FAHR developed the modern threshing system that provides quality work and superior performance. It is sturdy, reliable, highly productive and capable of carefully handling the product during the separation of the grain. This system meets the maximum require-ments of quality crops. The automatic torque-controlled V-belt tension ensures full power is possible at all times. By using the threshing drum variator, which is electrically regulated, you can set speeds of 420-1,250 RPM by simply pressing a pushbutton. The threshing drum and rear beater rotate synchronously. When the speed of the threshing drum varies, the speed of the second drum also varies (with a ratio of 1:1.1). This way you pro-tect the straw and do not break the crop. With the independent control of the con-
cave intake and outlet, you can electrical-ly set the most favorable adjustment for each type of crop, and also rapidly elimi-nate any overload. Certain types of crops are difficult to separate and these can be threshed with the help of de-awner bars easily inserted from outside by means of a convenient handle. The concave wrap angle of 121° and the 15 bars allow you to obtain a large separation area for the concave: 0.92m2. This permits a nearly total separation of the grain with a very small percentage of short straw.
Turbo-separator: for ToP performances The turbo-separator allows separation without slowing down the work pace, even when the straw is green, heavy or moist and when crops are badly infested with weeds. The third drum makes it possi-ble to increase productivity up to 20 %.
It can be set to 5 different positions (25-65 mm) and always obtains a complete separation without damaging the straw. The long open-type straw walkers avoid overload in moist crops and the grain return shelf allows a continuous flow of product to the sieves.
Sistema di trebbiatura con elevata separazione già nel controbattitore
Ampio angolo di avvolgimento del controbattitore di 121°
Entrata e uscita del controbattitore a regolazione indipendente
Turboseparatore regolabile elettricamente su 5 posizioni
battitore con diametro di 600 mm e 8 spranghe
11
vAnTAGGI
A quality threshing system with a high degree of separation of the grain in the concave lightens the work of the straw walkers and increases productivity.
MAXIMUM YIELD.
The concave can be adjusted electrically and independently at the intake and outlet.
The sturdy transmission of the threshing drum allows you to reach speeds of 420-1250 RPM and with an RPM reducer (on request) you can operate up to 210 RPM. by simply pressing a pushbutton you get optimal adaptation of all threshed products.
The transmission with automatic tensioning under load allows you to maintain a constant threshing speed to the full advantage of productivity.
Threshing system with a high degree of separation already in the concave
Wide concave wrap angle 121°
Concave intake and outlet have independent adjustment
Turbo-separator electrically adjustable to 5 positions
Threshing drum with a diameter of 600 mm and 8 bars
ADvAnTAGES
Prin
ted
in G
erm
any
Prin
ted
in G
erm
any
13
Trinciapaglia Integrato ad alte prestazioni
Regolazione elettrica dello spandimento in optional
facile accesso al gruppo di taglio
per la manutenzione
Regolazione del controcoltello centralizzata
vAnTAGGI
The DEUTZ-FAHR built-in straw chopper is operated from the cab and spreads the straw evenly across the entire us-able width. The changeover from straw chopping to swathing is done in one easy operation.
The counter knife settings can be quickly changed to suit a wide variety of crops and crop conditions. For maintenance of the straw chopper, it can easily be tilted forward to provide complete access to the cutting assembly.
When the straw chopper is disengaged, the gentle threshing of the crop results in excellent quality long straw that is easy to bale.
Straw chopper: built-in and easy to operate.
12
SwATHED OR CHOppED STRAw: TOp qUALITY RESULT IN EITHER CASE.
built-in high performance straw chopper
Easy access to cutting assembly for maintenance
Centralized counter knife control
ADvAnTAGES
Prin
ted
in G
erm
any
Prin
ted
in G
erm
any
The high yield threshing system gives high performance with maximum respect for product quality.
The quality of threshed products can be controlled directly from the cab.
The independent double recovery avoids overloads to the threshing system and thereby improves work quality and productivity.
ADvAnTAGES vAnTAGGI
maximum performance is obtained in all operating conditions.
Large volumes, rapid emptying.For a rapid harvest without interruptions: the cereal tank of the 5660 HTS Climber has a capacity of 7,500 liters. Since its
empties from the upper part, even the tallest trailers or trucks can be filled wi-thout problems. Grain samples can be checked by the driver from the in-cab sampler for rapid control of the efficiency of the threshing process. Equally conveni-ent is being able to check the filling level
which is indicated by an electronic gauge and visual checking window.Thanks to the generous DEUTZ engine, there are no problems unloading the grain during the threshing phase.
1514
IN THE TANK YOU wILL FIND ONLY pERFECTLY CLEAN GRAIN.
The oscillating preparation pan brings a layered product that is ready for cleaning to the sieves; moreover, maintenance is easy because the pan can be removed from the front part of the combine har-vester. The sieving system with a large surface (5.28 m2), the tangential flow
turbine fitted with 44 vanes, the double step with a pre-sieving function provide perfectly clean grain. The exclusive in-dependent double returns system even-ly spreads the crop on the preparation pan and thereby avoids overloads to the threshing system. If any ears are not
threshed, they can be treated by means of two re-threshers located in the returns system. These allow you to bring com-pletely separated grain to the preparati-on pan. The re-threshers are fitted with friction plates that are interchangeable and specific to the various crops so that
1414
Turbine fan for a constant flow of air to the sieves
opposed action sieving system with a double step
Dedicated gentle re-thresher that doesn‘t overload the sieves
Large cereal tank with capacity of 7,500 liters
Tank empties from above
ADvAnTAGES
Prin
ted
in G
erm
any
Prin
ted
in G
erm
any
The low consumption levels allow signifi cant savings and are more respectful of the environment.
The DEUTZ-fAHR Common-Rail dual pump system provides extremely high injection pressures and optimizes engine output.
for optimal accessibility, the radiator grill can be opened with no problem.
Power, fl exibility, low fuel consumption and reliability are the key characteristics that distinguish DEUTZ engines: capable of working for hours, even in diffi cult condi-tions and in the presence of dust and ex-treme temperatures.
Productivity and savings The modern DEUTZ engines, cooled by fl uid, stand out for their high power and constant yields. Its Common-Rail injec-tion system, along with its 24 valves and electronic regulation, allow the engine to always produce optimum power and over-come possible overloads without losing productivity. The high technological level of the engines installed on DEUTZ-FAHR combine harvesters consume less per hour than any other engine produced in the world. All of this, along with a high-effi ciency threshing system, reduces fuel consumption for every ton of threshed pro-duct to the lowest levels on the market.
DCR (DEUTZ Common-Rail)The DEUTZ Common-Rail system has a special feature consisting of two oil-bath feed pumps and a dispenser valve that prevents fuel return to the tank. The for-mer feature makes for absolute reliability because the pumps are not lubricated by the fuel and therefore do not depend on its quality.The latter prevents the fuel from overhe-ating and affecting the effi ciency of the engine.Moreover the injectors are electronically controlled so injection is regulated as a function of engine load.
DEUTZ Common-Rail and the 24 valves provide extra high performance and remarkable fuel savings
Power takeoff on both sides of the engine guarantee a better power distribution and a more compact machine
Electronically controlled injectors
Dual oil-bath feed pumpUNFAILING pOwER INCOMpARABLE EFFICIENCY.
16
ADvAnTAGES
Prin
ted
in G
erm
any
Prin
ted
in G
erm
any
19
All main controls are located to the right of the operator and divided according to their function for immediate accessibility.With the Commander Stick, the operator has everything under control and can be freer and more at ease to dedicate his / her full attention to the combine harvester.
With the Commander Control, all the adjustments to the combine harvester can be made in a simple and intuitive manner.
Setting and control of the combine harvester by means of the onboard computer Commander Control
Comfortable spacious cab with deluxe driving comfort
Main controls electrically operated
Control of all major cutter bar functions and driving functions by means of the CommanderStick
Pedal control for emergency stop of the cutter bar
Wide-ranging visibility of the working area
built-in control of leveling function and four wheel drive
18
MAXIMUM DRIVING COMFORT.
The CommanderCab IV offers truly unique driving pleasure. The sense of well-being starts in the comfortable seat with a pneumatic suspension and a built-in arm-rest. The pleasure continues with the er-gonomic CommanderStick which has all the driving and control functions on it. All the control elements, switches and con-trol instruments are grouped according to their function on the right-hand console, conveniently accessible and easy to ope-rate. Moreover they are illuminated for nighttime use.
Driver well-being.The CommanderCab IV is suspended on flexible mountings at four points that pre-vent all vibrations and oscillations. The new CCM (Combine Control Management) console groups the various functions of the machine for better control. In addition to the usual alarm signals, the new onboard computer sitting right by the operator pro-vides the following functions: tachometer, grain loss and returns, hectare counter with cutting bar dividing function, hour me-ter for the engine and threshing system, engine load and cutting height indicator.
All the regulating and control functions of the threshing apparatus are managed by the Commander Control 2,000, while the bar is managed by the control unit of the auto-control system unit.An extra feature to improve operator comfort is a set of convenient shelves and cubby holes for documents and your cell phone. When working at night, the power-ful work lights provide flood lighting.
ADvAnTAGES
Prin
ted
in G
erm
any
Prin
ted
in G
erm
any
facile accessibilità a tutti gli organi principali
facile manutenzione giornaliera grazie alla lubrificazione centralizzata
Lubrificazione automatica in opzione
Manutenzione semplice e veloce
The automatic lubrication system optional minimizes maintenance jobs. Centralized manual lubrication system is standard.
vAnTAGGI
All the electrical functions are located to the right of the operator for rapid access.
MAINTENANCE SO SIMpLE IT IS EXEMpLARY.
20
The after-sale checks and scheduled maintenance are easy to follow. The sturdy side doors open with the help of the gas strut. Therefore all drive elements and compo-nents subject to maintenance are imme-diately and conveniently accessible. Long maintenance intervals ensure high daily productivity in harvest season with mi-nimum downtime and low maintenance costs. The engine maintenance can be
performed easily from the large platform located on the straw walker compart-ment. All areas requiring maintenance are close at hand.
To clean the cooling system, the radia-tors, which are formed like a book, can be easily separated and a dedicated plat-form allows you to perform maintenance on them conveniently and safely.
Constant value throughout time.DEUTZ-FAHR combine harvesters are built with materials having high resi-stance to wear.All metal parts are treated by catapho-resis to prevent corrosion.All of this guarantees constant value throughout time and safe daily use, year after year.
The battery is easy to access without needing tools. A dedicated platform facilitates maintenance of the radiators.
The fuel filter is close at hand for easy replacement.
Prin
ted
in G
erm
any
Prin
ted
in G
erm
any
Type 5660 HTS Climber
Threshing drum
Diameter mm 600
Width mm 1,270
Bars qty 8
Variator with electrical regulation RPM 420 - 1,250
Threshing drum RPM reducer (optional) RPM 210 - 625
Concave
Bars qty 15
Wrap angle Degrees 121
Separation surface m2 0.95
Stone trap standard
De-awner plates with lateral control standard
Independent electrical regulation at intake and outlet standard
Transformation for corn grains or CCM on request
Concave with segments on request
Turbo-separator (TS)
Diameter mm 590
RPM speed RPM 775 / 410
Regulation to 5 positions from cab (electrical) standard
Separation surface m2 0.81
Straw walker
Elements qty 5
Steps qty 4
Open straw walkers standard
Ball bearing supports standard
Shaking surface m2 5.60
Total separation surface m2 7.36
Straw walker return shelf standard
Electronic control of straw walker speed standard
Straw chopper – chaff spreader
Built-In straw chopper with width regulation of manual spreading
on request
Electrical regulation of spreading width on request
DEUTZ-FAHR5660 HTS CLIMBER
Technical daTa
Type 5660 HTS Climber
Cleaning system
High-performance turbine fan standard
Pre-sieve standard
Lighting of sieving unit standard
Sieves with opposing movement standard
Total ventilated sieving area m2 5.28
Recovery
Electronic control of recovery overload standard
Independent recovery DX / SX with treshing system standard
Serbatoio granella
Capacity 7,500
Emptying in any position standard
Optical and sound indicator of filling level standard
Internal lighting standard
Taking samples of grain from driver‘s seat standard
Unloading speed 85 l / sec
DEUTZ 4 valve Common Rail engine
TCD 2012 L06 4V – 6 cylinder 6057 cc fluid cooling EURO III (97 / 68 / EC)
kW / HP 183 / 250
Overpower capacity (SAE J1995) kW / HP 194 / 265
Transmission / brakes / Steering
Hydrostatic transmission with four-speed gearbox standard
Forward speed km / h 0 - 30.0
Reverse speed km / h 0 - 14.0
Hydraulic brake pedal usable as single break, mechanical parking brake
standard
Four-wheel-drive standard
Leveling system
Slope compensation 40 % lateral – 30 % uphill – 10 % downhill
Proportional leveling control standard
Automatic disconnection of four-wheel-drive standard
Type 5660 HTS Climber
Pneumatici
Front, 620 / 75 R30 168 A8 standard
Rear, 405 / 70 R20 155 A2 standard
Cab
CommanderCab IV panoramic stratified tinted glass windshield, comfortable driver seat with armrest, passenger seats
standard
CommanderStick for operating many functions standard
CommanderControl for convenient electrical operation of cutting bar, threshing assembly, concave, TS and emptying of grain tank
standard
CCM (Combine Control Management) standard
6 work lights on cab, 1 work light on grain tank
standard
2 rear work lights standard
Electrically adjustable right side mirror standard
Heating and air-conditioning standard
Safety devices
Safety clutch for upper shaft, feeding auger, reel, operation of straw walker and auger for grain
standard
DEUTZ-FAHR agrotronic with InfoCenter,Optical and sound control of important functions
n° 24
Electronic control of RPM speed for straw walker, grain and recovery elevator
standard
Emergency stop for cutting bar standard
Maintenance
Centralized manual lubrication system, greasing points: 8 on the left, 6 on the right
standard
Automatic centralized lubrication system for approximately 60 lubrication points
on request
Prin
ted
in G
erm
any
Prin
ted
in G
erm
any
Prin
ted
in G
erm
any
2322 22
Type 5660 HTS Climber
Cutting bar
Usable width 4.8-6.3
Hydraulic cutting height regulation mm From -300 to +1.370
Cutting height indicator standard
Blade control box in oil bath having planetary blades (1,220 cuts/min) standard
RH and LH dividers, short & fixed standard
Number of ear lifters from 17-23 depending on width of cut
Automatic regulation of pressure on terrain – preselectedcutting height with indication of height
standard
Auto-control system (with lateral floatation) standard
Towing hook for wagon standard
Bar carrying wagon on request
Multiple hydraulic connector standard
Bar transformation kit for rape with lateral RH blade having separate hydraulic control
on request
Lateral LH rape blade with separate hydraulic control (possible only with rape header)
on request
Cutting blade transformation kit for sunflower on request
Reel
6 bars with vertical regulation standard
Horizontal hydraulic regulation standard
Electrical speed regulation RPM continuous 16-45
Automatic regulation of reel rpm to forward speed standard
Type A(mm)
b(mm)
Weight(kg)
Dimensions in mm
L = 480
4.80 m 4,796 5,124 1,420 D = 610
5.40 m 5,406 5,734 1,540 d = 350
6.30 m 6,320 6,648 1,760 h = 130
a = 50
b (Exterior width)
A (Cutting width)
24880
D a
dh
L
DEUTZ-FAHR5660 HTS CLIMBER
Technical daTa
Type 5660 HTS Climber
Dimensions in mm
g Pitch 4,420
h Length without cutting bar 9,910
j Height of grain tank1) 4,150
1) with standard tyres
i
k
h
gType 5660 HTS Climber
Dimensions in mm
b Width1) without cutting bar 3,950
4.80 m 5,124
5.40 m 5,734
6.30 m 6,648
with 4.80 m bar 2,025
with 5.40 m bar 1,720
with 6.30 m bar 1,260
1) with tyres 620/75 R30 front and 405 / 75 R 20 rear
abc
f
b
e
Prin
ted
in G
erm
any
Prin
ted
in G
erm
any
Prin
ted
in G
erm
any
21 2524
SURE AND SAFE WITH ORIGINAL DEUTZ-FAHR.
Original service is wise Without doubt – many can repair much. But only your DEUTZ-FAHR specialist dea-ler knows your combine inside and out. Only your dealer has regularly trained mechanics and experts on call. Only dea-lers have the special tools and diagnostic equipment required for competent diagno-sis and inspection. All this gives you peace of mind – without doubt.
Original parts make good sense As you placed your trust in the original combine, we recommend you use original parts when required. Only these comply with the high quality and safety standards of DEUTZ-FAHR and ensure correct func-tion and operation without problems –guaranteed.
This printed material is designed for international use. The illustrations it contains show both special equipment and incomplete standard equipment. The availability of some illustrated models, standard and special equipment can vary from country to country. Only the dealer‘s price list stipulates whether such illustrated equipment is included as a standard feature or whether it is a special accessory. In addition the illustrated mounted implements and special accessories may not always comply with the respective statutory regulations. It is the responsibility of the customer – after consultation with the dealer – to verify this, taking the operating instructions into account. All information and illustrations in this brochure are subject to correction; errors excepted. Furthermore all information contained in this brochure is not binding and is subject to modifi cations of a technical and commercial nature or those resulting from statutory regulations. No claims whatsoever can be derived from these. SAME DEUTZ-FAHR DEUTSCHLAND GmbH reserves the right to make any changes to the design and technical construction and also the scope of standard equipment at any time and without prior notice. Order no.: XXX-10-01
SAME DEUTZ-FAHR DEUTSCHLAND GmbH, D-89415 Lauingen, www.DEUTZ-FAHR.de
ww
w.t
rio-b
com
.de
SDFL
201-
374
Leo
1108
Have a word with your DEUTZ-FAHRdealer – he will be pleased to answer your questions:
EVOLVING AGRICULTURE.
Prin
ted
in G
erm
any