digimerge s1jf3g installation manual
DESCRIPTION
Buy the Digimerge S1JF3G at JMAC Supply.https://www.jmac.com/product_p/digimerge-s1jf3g.htm?=scribdTRANSCRIPT
S1JF3GIP66 Outdoor Junction Box
www.�irsecurity.com/proS1JF3G_INSTALLATION_DIAGRAM_EN_R1
Weight: 0.6Kg / 1.3lbsSX8 Plastic Anchor 4pcs
ST6X45 Tapping Screw 4pcs
M6 Washer 4pcs
Allen Key S3.0 1pcs
54
Rubber Plug 1 pcsJunction Box 1pcs
M4x10 Stainless Steel Screw 3pcs
Rubber Gasket 1pcs Waterproof Connector 1pcs
M4x18 Stainless Screw 4pcs(pre-attached)
SX8 Plastic Anchor 4pcs
ST6X45 Tapping Screw + M6 Washer 4pcs
Rubber Gasket 1pcs (pre-attached)
Rubber Plug 1pcs (pre-attached)
M4x10 Stainless Steel Screw 3pcs
INSTALLATION
PACKAGE CONTENTS DIMENSIONS (UNITS: mm)
Make sure to install in an area that can support the total weight of the camera and accessories.
the latest compatibility list.
If using conduit, you must use thread seal tape to ensure a proper seal.
Conduit: G1/2” or M20 P=1.5