displayit creo single pole tripod monitor stand assembly€¦ · with tripod base assembly...

Creo Monitor Stand with Tripod Base Assembly 800.207.0311 displayit.com Updated 12/5/2012 1. Press button on 1st leg and attach center hub. Repeat on other two legs. Push-button lock 2. Slide cap over base hub. Rotate Rotate Rotate 4. Attach second vertical pole. Tighten top knob to secure. 5. Attach top cap. Tighten cap to secure. 3. Attach ﬁrst vertical pole to base. Tighten top knob to secure. Attaching Accessory with Universal Cradle Mount Insert metal part of accessory knob into channel. Slide to desired height. Rotate knob to lock. Repeat for other side of channel. Universal cradles mount hooks over two knobs.

Upload: others

Post on 24-Aug-2020

2 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Creo Monitor Standwith Tripod Base Assembly800.207.0311 displayit.com

Updated 12/5/2012

1. Press button on 1st leg and attach center hub. Repeat on

other two legs.Push-button lock

2. Slide cap over base hub.

Rotate

4. Attach second vertical pole.Tighten top knob to secure.

5. Attach top cap.Tighten cap to secure.

3. Attach �rst vertical pole to base.Tighten top knob to secure.

Attaching Accessory with Universal Cradle Mount

Insert metal part of accessory knob into channel. Slide to desired height. Rotate knob to lock.Repeat for other side of channel. Universal cradles mount hooks over two knobs.

LIGHTWEIGHT TRIPOD

Displayit Inc. Capabilities Catalog

42 Instruments, counting, computing, controlling · 2014. 10. 21. · 42c-3/01 Assembly of the tripod legs on the tripod head and arrangements for mounting instruments on the tripod;

Tripod Photo Profile

Myzox Co., Ltd. · Aluminium Tripod CHECK FOR YOUR MOBILITY TRIPOD Round leg TRIPOD HEAD FLAT SPECIFICATIONS Model Full extended Full closed Weight Tripod head size Model Full extended

ALL-METAL TRIPOD TRIPOD DOLLY FRICTION HEAD TILT HEAD

INSTRUCTION MANUAL - Telescopes · AZ1 (reflector) AZ2 (refractor) FOR AZ1 & AZ2 TRIPOD SET UP TELESCOPE ASSEMBLY Fig.1 Fig.2 Fig.3 Fig.4 Fig.3 Fig.4 ADJUSTING TRIPOD LEGS (Fig.1)

DSLR Cinema Bundle Assembly Guideaperturent-static.s3.amazonaws.com/documents/RedrockMicro-Cine… · (2b) Attach 12in Rods to Tripod Plate. (2c) Attach Camera / DSLR Baseplate assembly

AVTP Model Tripod

Instruction Manual · Instruction Manual Omegon® 150/750 EQ-4 ... pages. 3. Assembly Start by setting the tripod. Open the tripod legs as shown (figure 2). Place the supplied accessory

Understanding Your Tripod Survey Results: Teacher Report ...€¦ · ©! 2014 The Tripod Project Page 1 Understanding Your Tripod Survey Results: Teacher Report The Tripod™ student

TRIPOD | TRÉPIED