Features:
• Super bright LEDs• 5 Selectable patterns• Two speed selections
SCANNERS™ is a trademark of Varad USA
Thank you for purchasing our new generationof SCANNERS™. With our latestmicrocontroller technology, software andindustrial design we have added a new levelof excitement to the art of visual theftdeterrence.
Mounting the SCANNERS™:
Find suitable location for installation. Drill any holes ifnecessary and clean surface with rubbing alcohol toremove oils. Use the provided 3M™ double sided tapeand mount. Refer to following diagram for wiringinstructions.
Installation with alarm system:
SCANNERS™ will activate when alarm system is
Battery negative or chassis ground
Battery positive (constant)
Alarm system accessory output or groundoutput when armed.
SCANNERS™
Black
Red
OrangeIM-VSX50V1
How to operate
Installation without alarm system:
SCANNERS™ will activate when engine is turned off.
SCANNERS™
Black
Red
Orange
Battery negative or chassis ground
Battery positive (constant)
Ignition - Ground when engine is “OFF”.(See fuse box)
Program button
Program button on Raptor(Use a small paper clip)
OFF
Ignition
ON
Ignition
SCANNERSTM
Trouble shooting - frequently asked questions
SCANNERS™ does not remember patternMemory loss will occur whenever the positive wire losescontact with the battery for a moment. This can occur ifthe positive wire is attached to the wrong contact on thefuse box or some other location in the vehicle. Try toconnect the SCANNERS™ positive wire directly to thebattery positive terminal.
SCANNERS™ does not work when connected to myalarmIf you want the SCANNERS™ to turn on when youactivate you alarm system you must connect the orangeSCANNER™ wire to the grounded output (whenarmed) of your alarm system. DO NOT CONNECT TOTHE LED OUTPUT!. The LED output wire only providesa 2-3 volts flashing. Refer to your alarm systeminstallation manual or ask your local dealer for the
How to select Patterns:
Ignition must be “OFF” or alarm is “armed”, press programbutton (Paper clip for VS550 Series) momentarily andSCANNERS™ will display next pattern. Repeat to viewnext pattern.
How to change speed:
Ignition must be “OFF” or alarm is “armed”, push andhold program button until the speed changes . Repeatto select next speed. The SCANNERS™ has two speed
My SCANNERS™ does not turn off when I arm myalarm system.This situation is caused by ground leakage through theignition kill relay. You must install a diode per thefollowing diagram.
Varadʼs product warranty covers against breakage due to defects in materials or workmanshipfor one year from the date of purchase. Warranty is only valid with proof of purchase from anAuthorized Varad Dealer. Varadʼs warranty program does not cover cosmetic damage, anddamage due to acts of God, accident, misuse, abuse or negligence to the product. Repair orreplacement as provided under this warranty is the exclusive remedy of the consumer. Varadshall not be liable for any incidental or consequential damage for breach of any express orimplied warranty on this product. Except to the extent provided by this warranty or prohibitedby applicable law, there are no implied nor expressed warranties or merchantability or fitnessfor a particular purpose of this product.
BlacRed
Orange
SCANNERS™
Alarm system
Switching diode1N4148, 1/2 Watt
Starter KillRelay
Ground outputwhen armed
Designed in U.S.A. • Assembled in China
