Features:

• Super bright LEDs• 5 Selectable patterns• Two speed selections

SCANNERS™ is a trademark of Varad USA

Thank you for purchasing our new generationof SCANNERS™. With our latestmicrocontroller technology, software andindustrial design we have added a new levelof excitement to the art of visual theftdeterrence.

Mounting the SCANNERS™:

Find suitable location for installation. Drill any holes ifnecessary and clean surface with rubbing alcohol toremove oils. Use the provided 3M™ double sided tapeand mount. Refer to following diagram for wiringinstructions.

Installation with alarm system:

SCANNERS™ will activate when alarm system is

Battery negative or chassis ground

Battery positive (constant)

Alarm system accessory output or groundoutput when armed.

SCANNERS™

Black

Red

OrangeIM-VSX50V1

How to operate

Installation without alarm system:

SCANNERS™ will activate when engine is turned off.

SCANNERS™

Black

Red

Orange

Battery negative or chassis ground

Battery positive (constant)

Ignition - Ground when engine is “OFF”.(See fuse box)

Program button

Program button on Raptor(Use a small paper clip)

OFF

Ignition

ON

Ignition

SCANNERSTM

Trouble shooting - frequently asked questions

SCANNERS™ does not remember patternMemory loss will occur whenever the positive wire losescontact with the battery for a moment. This can occur ifthe positive wire is attached to the wrong contact on thefuse box or some other location in the vehicle. Try toconnect the SCANNERS™ positive wire directly to thebattery positive terminal.

SCANNERS™ does not work when connected to myalarmIf you want the SCANNERS™ to turn on when youactivate you alarm system you must connect the orangeSCANNER™ wire to the grounded output (whenarmed) of your alarm system. DO NOT CONNECT TOTHE LED OUTPUT!. The LED output wire only providesa 2-3 volts flashing. Refer to your alarm systeminstallation manual or ask your local dealer for the

How to select Patterns:

Ignition must be “OFF” or alarm is “armed”, press programbutton (Paper clip for VS550 Series) momentarily andSCANNERS™ will display next pattern. Repeat to viewnext pattern.

How to change speed:

Ignition must be “OFF” or alarm is “armed”, push andhold program button until the speed changes . Repeatto select next speed. The SCANNERS™ has two speed

My SCANNERS™ does not turn off when I arm myalarm system.This situation is caused by ground leakage through theignition kill relay. You must install a diode per thefollowing diagram.

Varadʼs product warranty covers against breakage due to defects in materials or workmanshipfor one year from the date of purchase. Warranty is only valid with proof of purchase from anAuthorized Varad Dealer. Varadʼs warranty program does not cover cosmetic damage, anddamage due to acts of God, accident, misuse, abuse or negligence to the product. Repair orreplacement as provided under this warranty is the exclusive remedy of the consumer. Varadshall not be liable for any incidental or consequential damage for breach of any express orimplied warranty on this product. Except to the extent provided by this warranty or prohibitedby applicable law, there are no implied nor expressed warranties or merchantability or fitnessfor a particular purpose of this product.

BlacRed

Orange

SCANNERS™

Alarm system

Switching diode1N4148, 1/2 Watt

Starter KillRelay

Ground outputwhen armed

Designed in U.S.A. • Assembled in China

www.varad.comtechsupport@varad.com