dynamic braking resistors allen-bradley 1336 drives · dynamic braking resistors allen-bradley 1336...

Dynamic Braking Resistors Allen-Bradley 1336 Drives

4750 Olympic Blvd. Erlanger, KY 41018

Toll Free (800) 537-6144

www.postglover.com

Valid from 11/01/05

Post Glover and IPC Power Resistors have merged to form the world’s leading resistor company. With over 130 years of combined industrial and utility experience, the new POST GLOVER delivers proven solutions for your most critical applications. Post Glover offers application expertise across the resistor product lines. We have also developed a line of standard dynamic braking products that will enable consistent design, service, and on time delivery of your order. In helping to serve you better, we have developed this catalog for the AB 1336 Dynamic Braking product line. The following pages contain Dynamic Braking Sizing Tables for all 1336 drives. Simply use the input voltage, horsepower, desired braking torque, and duty cycle to choose the correct unit for your application. Additional information includes Installation and Mounting Instructions. For any information not found in this catalog, please contact Post Glover direct at (800) 537-6144 or email [email protected] For more information on choosing the proper chopper module, please see AB Publication 1336-5.65 at www.ab.com/drives/

��

Delivery:Shipment ex-works in one week or less ARO.

Rush shipment is 48 hours, or less, ARO with a 20% premium added.PG P/N H.P. Ohms Weight W D H A B List $ ea.

441-1E .5, .75, 1 188 1.55 $59.00 Options:441-2E 2, 3 94 1.55 $59.00 For terminal block connection, add $18 NET. Add "-TB"441-3E 5 47 6.3 $234.00 to part number.

441-1B .5, .75, 1 188 5.25 13 $137.00 For resistor overheat thermal sensing switch, add $12 NET.441-2B 2, 3 94 5.25 13 $137.00 Specify normally open (NO) or normally closed (NC) by 441-3B 5 47 13.1 12 11 $325.00 adding "-NO" or "-NC" to part number.

441-1F .5, .75, 1 755 4.2 $156.00 For outdoor enclosures, add 25%. Add "-W" to part number.441-2F 2, 3 377 3.5 $88.00 (Outdoor are ANSI-61 gray)441-3F 5 188 6.3 $234.00

For ANSI-61 gray powder coat enclosure, add 15%. Add441-1D .5, .75, 1 755 8.85 12 5 $234.00 "-PC" to part number.441-2D 2, 3 377 5.7 13 $160.00441-3D 5 188 13.1 12 11 $390.00 Construction notes :

Mill galvanized indoor enclosures with ventilated covers.

Resistance values are plus or minus 10%.

All terminals, terminal hardware and connection jumpers are corrosion resistant.

Enclosed junction box area for optional terminal block andthermal switch.

* Note: Additional enclosure level required to accommodate thermal switch and/ or terminal block. Add $135 NET ( not including adderfor individual options) and 7" to height.

Mounting holes are 7/16" (1/2" on 29" W units) ��

Dimensions (in inches)

For Allen-Bradley 160 Drives

14" x 4" x 5"

14" x 4" x 5"14" x 13" x 5"

10 1/4" x 2" x 2 3/4"200 - 240 VAC "L" Brackets

380 - 460 VAC Enclosed

14" x 4" x 5"14" x 13" x 5"

14" x 7" x 5"

11 3/4" x 2" x 2 3/4"16 1/2" x 5" x 4"

11 3/4" x 2" x 5 1/4"11 3/4" x 2" x 2 3/4"

380 - 460 VAC "L" Brackets

16 1/2" x 5" x 5"

200 - 240 VAC Enclosed

Front viewBottom view

WD

H

A

B

��


Rush shipment is 48 hours, or less, ARO with a 20% premium added.PG P/N H.P. Ohms Weight W D H A B List $ ea.

Options:1305-1C 2 64 7.85 12 5 $221.00 For terminal block connection, add $18 NET. Add "-TB"1305-2C 3 64 7.85 12 5 $221.00 to part number.1305-3C 5 32 9.14 12 8 $299.00

For resistor overheat thermal sensing switch, add $12 NET.1305-1D 0.50 560 7.85 12 5 $221.00 Specify normally open (NO) or normally closed (NC) by 1305-2D 0.75 560 7.85 12 5 $221.00 adding "-NO" or "-NC" to part number.1305-3D 1 560 7.85 12 5 $221.001305-4D 1.5 560 7.85 12 5 $221.00 For outdoor enclosures, add 25%. Add "-W" to part number.1305-5D 2 258 7.85 12 5 $221.00 (Outdoor are ANSI-61 gray)1305-6D 3 258 7.85 12 5 $221.001305-7D 5 129 9.14 12 8 $299.00 For ANSI-61 gray powder coat enclosure, add 15%. Add

"-PC" to part number.

Construction notes :Mill galvanized indoor enclosures with ventilated covers.






20% dutyFor Allen-Bradley 1305 Drives

14" x 7" x 5"14" x 7"x 5"

14" x 7" x 5"

230 VAC series Enclosed

14" x 7" x 5"


14" x 13" x 5"460 VAC series Enclosed

14" x 7" x 5"14" x 7" x 5"14" x 7" x 5"

14" x 7" x 5"14" x 13" x 5"


WD

H

A

B

��


Rush shipment is 48 hours, or less, ARO with a 20% premium added.PG P/N H.P. Ohms Weight W D H A B List $ ea.220-1A 0.5 154 7.5 12 5 $221.00 Options:220-2A 0.75 110 7.5 12 5 $221.00 For terminal block connection, add $18 NET. Add "-TB"220-3A 1 85 8.7 12 8 $299.00 to part number.220-4A 1.5 59 12.7 12 11 $390.00550-5A 2 45 14.8 19 8 $507.00 For resistor overheat thermal sensing switch, add $12 NET.220-6A 3 32 15.3 19 8 $553.00 Specify normally open (NO) or normally closed (NC) by 220-7A 5 20 23.1 26 11 $901.00 adding "-NO" or "-NC" to part number.220-8A 7.5 14 23.5 26 11 $875.00220-9A 10 11 33.1 27.5 14 $1,119.00 For outdoor enclosures, add 25%. Add "-W" to part number.

220-10A 15 7.3 57.9 27.5 14 $1,705.00 (Outdoor are ANSI-61 gray)220-11A 20 5.7 70.5 27.5 14 $2,277.00220-12A 25 4.5 77.6 27.5 14 $2,610.00 For ANSI-61 gray powder coat enclosure, add 15%. Add220-13A 30 3.8 98.1 27.5 14 $2,965.00 "-PC" to part number.220-14A 40 2.7 116.8 27.5 14 $4,010.00







29" x 18" x 14" 29" x 18" x 14" 29" x 18" x 21" 29" x 18" x 21"

28" x 13" x 5" 28" x 13" x 5" 29" x 18" x 7" 29" x 18" x 14"

21" x 13" x 5"


230 Volt - 100% Duty - 100% Braking TorqueFor Allen-Bradley 1336 Series Brake Chopper Modules

14" x 7" x 5" 14" x 7" x 5"

14" x 13" x 5" 14" x 13" x 5" 21" x 13" x 5"


WD

H

A

B

��


Rush shipment is 48 hours, or less, ARO with a 20% premium added.PG P/N H.P. Ohms Weight W D H A B List $ ea.220-1 0.5 154 7.5 12 5 $221.00 Options:220-2 0.75 110 8.7 12 8 $299.00 For terminal block connection, add $18 NET. Add "-TB"220-3 1 85 12.5 12 11 $390.00 to part number.220-4 1.5 59 14.7 19 8 $507.00220-5 2 45 18.9 19 11 $670.00 For resistor overheat thermal sensing switch, add $12 NET.220-6 3 32 22.3 26 11 $901.00 Specify normally open (NO) or normally closed (NC) by 220-7 5 20 28.7 27.5 14 $914.00 adding "-NO" or "-NC" to part number.220-8 7.5 14 37.5 27.5 14 $1,312.00 *220-9 10 11 61.8 27.5 14 $1,908.00 For outdoor enclosures, add 25%. Add "-W" to part number.220-10 15 7.3 67.6 27.5 14 $2,132.00 (Outdoor are ANSI-61 gray)220-11 20 5.7 105.8 27.5 14 $3,371.00220-12 25 4.5 112.4 27.5 14 $3,628.00 * For ANSI-61 gray powder coat enclosure, add 15%. Add220-13 30 3.8 149.8 27.5 14 $4,833.00 "-PC" to part number.







29" x 18" x 14" 29" x 18" x 21" 29" x 18" x 21" 29" x 18" x 28"

28" x 13" x 5" 29" x 18" x 7" 29" x 18" x 7" 29" x 18" x 14"

14" x 13" x 5" 14" x 13" x 5" 21" x 13" x 5" 21" x 13" x 5"


230 Volt - 100% Duty - 150% Braking Torque For Allen-Bradley 1336 Series Brake Chopper Modules

14" x 7" x 5"


WD

H

A

B

��


Rush shipment is 48 hours, or less, ARO with a 20% premium added.PG P/N H.P. Ohms Weight W D H A B List $ ea.222-1A 0.5 154 5.1 13 $140.00 Options:222-2A 0.75 110 5.1 13 $140.00 For terminal block connection, add $18 NET. Add "-TB"222-3A 1 85 5.1 13 $140.00 to part number.222-4A 1.5 59 5.1 13 $140.00222-5A 2 45 7.6 12 5 $221.00 For resistor overheat thermal sensing switch, add $12 NET.222-6A 3 32 7.6 12 5 $221.00 Specify normally open (NO) or normally closed (NC) by 222-7A 5 20 9.3 12 8 $305.00 adding "-NO" or "-NC" to part number.222-8A 7.5 14 12.7 12 11 $390.00222-9A 10 11 16.7 19 8 $553.00 For outdoor enclosures, add 25%. Add "-W" to part number.

222-10A 15 7.3 19.7 19 11 $700.00 (Outdoor are ANSI-61 gray)222-11A 20 5.7 20.9 19 11 $762.00222-12A 25 4.5 23.3 26 11 $864.00 For ANSI-61 gray powder coat enclosure, add 15%. Add222-13A 30 3.8 23.5 26 11 $875.00 "-PC" to part number.222-14A 40 2.7 36.3 27.5 14 $1,267.00222-15A 50 2.2 57.3 27.5 14 $1,674.00 Construction notes :222-16A 60 1.8 63.3 27.5 14 $1,971.00 Mill galvanized indoor enclosures with ventilated covers.222-17A 75 1.5 75.2 27.5 14 $2,600.00






29" x 18" x 7" 29" x 18" x 14"

21" x 13" x 5" 28" x 13" x 5"

29" x 18" x 14" 29" x 18" x 14"

14" x 4" x 5" 14" x 4" x 5" 14" x 4" x 5" 14" x 4" x 5"

For Allen-Bradley 1336 Series Brake Chopper Modules

28" x 13" x 5"

14" x 7" x 5" 14" x 13" x 5" 14" x 13" x 5" 21" x 13" x 5"

14" x 7" x 5"

21" x 13" x 5"


230 Volt - 20% Duty - 100% Braking Torque


WD

H

A

B

��


Rush shipment is 48 hours, or less, ARO with a 20% premium added.PG P/N H.P. Ohms Weight W D H A B List $ ea.222-1 0.5 154 5.1 13 $140.00 Options:222-2 0.75 110 5.1 13 $140.00 For terminal block connection, add $18 NET. Add "-TB"222-3 1 85 5.1 13 $140.00 to part number.222-4 1.5 59 7.5 12 5 $221.00222-5 2 45 7.6 12 5 $221.00 For resistor overheat thermal sensing switch, add $12 NET.222-6 3 32 8.9 12 8 $299.00 Specify normally open (NO) or normally closed (NC) by 222-7 5 20 12.6 12 11 $390.00 adding "-NO" or "-NC" to part number.222-8 7.5 14 16.1 19 8 $553.00222-9 10 11 18.9 19 11 $663.00 For outdoor enclosures, add 25%. Add "-W" to part number.222-10 15 7.3 23.5 26 11 $898.00 (Outdoor are ANSI-61 gray)222-11 20 5.7 25.5 26 11 $994.00222-12 25 4.5 32.7 27.5 14 $1,091.00 For ANSI-61 gray powder coat enclosure, add 15%. Add222-13 30 3.8 33.8 27.5 14 $1,143.00 "-PC" to part number.222-14 40 2.7 59.6 27.5 14 $1,783.00222-15 50 2.2 82.8 27.5 14 $2,844.00 * Construction notes :222-16 60 1.8 83.2 27.5 14 $2,973.00 * Mill galvanized indoor enclosures with ventilated covers.






29" x 18" x 7"

230 Volt - 20% Duty - 150% Braking TorqueDimensions (in inches)

28" x 13" x 5" 28" x 13" x 5" 29" x 18" x 7"

14" x 4" x 5"

29" x 18" x 14" 29" x 18" x 14" 29" x 18" x 14"

14" x 13" x 5" 14" x 13" x 5"


21" x 13" x 5" 21" x 13" x 5"

14" x 4" x 5" 14" x 4" x 5" 14" x 7" x 5" 14" x 7" x 5"


WD

H

A

B

��


Rush shipment is 48 hours, or less, ARO with a 20% premium added.PG P/N H.P. Ohms Weight W D H A B List $ ea.225-1A 0.5 154 5.1 13 $140.00 Options:225-2A 0.75 110 7.5 12 5 $221.00 For terminal block connection, add $18 NET. Add "-TB"225-3A 1 85 7.5 12 5 $221.00 to part number.225-4A 1.5 59 8.7 12 8 $299.00225-5A 2 45 8.8 12 8 $299.00 For resistor overheat thermal sensing switch, add $12 NET.225-6A 3 32 13.2 12 11 $390.00 Specify normally open (NO) or normally closed (NC) by 225-7A 5 20 15.6 19 8 $553.00 adding "-NO" or "-NC" to part number.225-8A 7.5 14 20.7 26 11 $760.00225-9A 10 11 24.4 26 11 $916.00 For outdoor enclosures, add 25%. Add "-W" to part number.225-10A 15 7.3 36.2 27.5 14 $1,265.00 (Outdoor are ANSI-61 gray)225-11A 20 5.7 41.5 27.5 14 $1,507.00225-12A 25 4.5 61.7 27.5 14 $1,893.00 For ANSI-61 gray powder coat enclosure, add 15%. Add225-13A 30 3.8 63.5 27.5 14 $1,947.00 "-PC" to part number.225-14A 40 2.7 77.2 27.5 14 $2,587.00 *225-15A 50 2.2 108.9 27.5 14 $3,496.00 Construction notes :225-16A 60 1.8 116.3 27.5 14 $3,839.00 Mill galvanized indoor enclosures with ventilated covers.








14" x 4" x 5" 14" x 7" x 5" 14" x 7" x 5" 14" x 13" x 5" 14" x 13" x 5" 14" x 13" x 5" 21" x 13" x 5" 28" x 13" x 5" 28" x 13" x 5" 29" x 18" x 7" 29" x 18" x 7" 29" x 18" x 14" 29" x 18" x 14" 29" x 18" x 14" 29" x 18" x 21" 29" x 18" x 21"


WD

H

A

B

��


Rush shipment is 48 hours, or less, ARO with a 20% premium added.PG P/N H.P. Ohms Weight W D H A B List $ ea.225-1 0.5 154 7.5 12 5 $221.00 Options:225-2 0.75 110 7.5 12 5 $221.00 For terminal block connection, add $18 NET. Add "-TB"225-3 1 85 8.7 12 8 $299.00 to part number.225-4 1.5 59 12.7 12 11 $390.00225-5 2 45 14.9 19 8 $507.00 For resistor overheat thermal sensing switch, add $12 NET.225-6 3 32 15.3 19 8 $553.00 Specify normally open (NO) or normally closed (NC) by 225-7 5 20 24.1 26 11 $901.00 adding "-NO" or "-NC" to part number.225-8 7.5 14 23.6 26 11 $875.00225-9 10 11 33.1 27.5 14 $1,119.00 For outdoor enclosures, add 25%. Add "-W" to part number.225-10 15 7.3 57.9 27.5 14 $1,705.00 (Outdoor are ANSI-61 gray)225-11 20 5.7 70.5 27.5 14 $2,277.00225-12 25 4.5 77.5 27.5 14 $2,610.00 For ANSI-61 gray powder coat enclosure, add 15%. Add225-13 30 3.8 105.8 27.5 14 $3,047.00 "-PC" to part number.225-14 40 2.7 116.8 27.5 14 $4,010.00225-15 50 2.2 173.1 27.5 14 $5,274.00 Construction notes :

Mill galvanized indoor enclosures with ventilated covers.






29" x 18" x 21"

14" x 13" x 5"

28" x 13" x 5" 29" x 18" x 7"

29" x 18" x 21" 29" x 18" x 35"

29" x 18" x 14" 29" x 18" x 14"

29" x 18" x 14"



21" x 13" x 5" 21" x 13" x 5" 28" x 13" x 5"

14" x 7" x 5" 14" x 7" x 5"

14" x 13" x 5"



WD

H

A

B

��


Rush shipment is 48 hours, or less, ARO with a 20% premium added.PG P/N H.P. Ohms Weight W D H A B List $ ea.440-1A 0.5 615 7.6 12 5 $221.00 Options:440-2A 0.75 439 7.6 12 5 $221.00 For terminal block connection, add $18 NET. Add "-TB"440-3A 1 342 8.6 12 8 $299.00 to part number.440-4A 1.5 237 12.3 12 11 $390.00440-5A 2 181 14.3 19 8 $507.00 For resistor overheat thermal sensing switch, add $12 NET.440-6A 3 128 15.3 19 8 $553.00 Specify normally open (NO) or normally closed (NC) by 440-7A 5 81 23.1 26 11 $901.00 adding "-NO" or "-NC" to part number.440-8A 7.5 56 30.1 27.5 14 $1,083.00440-9A 10 44 34.8 27.5 14 $1,265.00 * For outdoor enclosures, add 25%. Add "-W" to part number.440-10A 15 29 57.9 27.5 14 $1,705.00 (Outdoor are ANSI-61 gray)440-11A 20 23 68.3 27.5 14 $2,181.00440-12A 25 18 74.9 27.5 14 $2,493.00 For ANSI-61 gray powder coat enclosure, add 15%. Add440-13A 30 15 98.1 27.5 14 $2,965.00 "-PC" to part number.440-14A 40 12 101.4 27.5 14 $3,121.00440-15A 50 9.5 155.1 27.5 14 $5,067.00 Construction notes :440-16A 60 8 161.1 27.5 14 $5,566.00 Mill galvanized indoor enclosures with ventilated covers.440-17A 75 6.4 185.4 27.5 14 $6,471.00 *






29" x 18" x 21" 29" x 18" x 28" 29" x 18" x 28" 29" x 18" x 28"

29" x 18" x 14" 29" x 18" x 14" 29" x 18" x 21"

28" x 13" x 5" 29" x 18" x 7" 29" x 18" x 7" 29" x 18" x 14"



14" x 7" x 5" 14" x 7" x 5" 14" x 13" x 5" 14" x 13" x 5" 21" x 13" x 5" 21" x 13" x 5"


WD

H

A

B

��


Rush shipment is 48 hours, or less, ARO with a 20% premium added.PG P/N H.P. Ohms Weight W D H A B List $ ea.440-1 0.5 615 7.7 12 5 $221.00 Options:440-2 0.75 439 8.6 12 8 $299.00 For terminal block connection, add $18 NET. Add "-TB"440-3 1 342 12.3 12 11 $390.00 to part number.440-4 1.5 237 14.1 19 8 $507.00440-5 2 181 17.7 19 11 $670.00 For resistor overheat thermal sensing switch, add $12 NET.440-6 3 128 21.1 26 11 $855.00 Specify normally open (NO) or normally closed (NC) by 440-7 5 81 29.8 27.5 14 $1,083.00 adding "-NO" or "-NC" to part number.440-8 7.5 56 53.8 27.5 14 $1,648.00440-9 10 44 60.9 27.5 14 $1,830.00 For outdoor enclosures, add 25%. Add "-W" to part number.440-10 15 29 65.6 27.5 14 $2,045.00 (Outdoor are ANSI-61 gray)440-11 20 23 105.8 27.5 14 $3,371.00440-12 25 18 127.1 27.5 14 $3,741.00 For ANSI-61 gray powder coat enclosure, add 15%. Add440-13 30 15 135.3 27.5 14 $4,110.00 "-PC" to part number.440-14 40 12 167.2 27.5 14 $5,001.00440-15 50 9.5 173.1 27.5 14 $5,274.00 Construction notes :440-16 60 8 224.8 27.5 14 $7,146.00 Mill galvanized indoor enclosures with ventilated covers.






29" x 18" x 35" 29" x 18" x 35" 29" x 18" x 42"

29" x 18" x 21" 29" x 18" x 21" 29" x 18" x 21"

29" x 18" x 7" 29" x 18" x 14" 29" x 18" x 14" 29" x 18" x 14"



14" x 7" x 5" 14" x 13" x 5" 14" x 13" x 5" 21" x 13" x 5" 21" x 13" x 5" 28" x 13" x 5"


WD

H

A

B

��


Rush shipment is 48 hours, or less, ARO with a 20% premium added.PG P/N H.P. Ohms Weight W D H A B List $ ea.442-1A 0.5 615 4.2 13 $169.00 Options:442-2A 0.75 439 5.8 13 $169.00 For terminal block connection, add $18 NET. Add "-TB"442-3A 1 342 5.8 13 $169.00 to part number.442-4A 1.5 237 5.1 13 $140.00442-5A 2 181 7.5 12 5 $221.00 For resistor overheat thermal sensing switch, add $12 NET.442-6A 3 128 7.5 12 5 $221.00 Specify normally open (NO) or normally closed (NC) by 442-7A 5 81 8.7 12 8 $299.00 adding "-NO" or "-NC" to part number.442-8A 7.5 56 12.6 12 11 $390.00442-9A 10 44 14.9 19 8 $507.00 For outdoor enclosures, add 25%. Add "-W" to part number.

442-10A 15 29 18.7 19 11 $715.00 (Outdoor are ANSI-61 gray)442-11A 20 23 22.4 26 11 $901.00442-12A 25 18 23.3 26 11 $864.00 For ANSI-61 gray powder coat enclosure, add 15%. Add442-13A 30 15 28.9 27.5 14 $929.00 "-PC" to part number.442-14A 40 12 35.2 27.5 14 $1,215.00442-15A 50 9.5 57.3 27.5 14 $1,674.00 Construction notes :442-16A 60 8 61.6 27.5 14 $1,867.00 Mill galvanized indoor enclosures with ventilated covers.442-17A 75 6.4 63.6 27.5 14 $1,958.00442-18A 100 5 82.8 27.5 14 $2,844.00 * Resistance values are plus or minus 10%.442-19A 125 3.9 105.7 27.5 14 $3,340.00442-20A 150 3.4 124.2 27.5 14 $4,190.00 * All terminals, terminal hardware and connection jumpers 442-21A 200 2.6 138.2 27.5 14 $4,225.00 * are corrosion resistant.




14" x 13" x 5" 21" x 13" x 5"

14" x 4" x 5" 14" x 7" x 5" 14" x 7" x 5"

14" x 13" x 5"


14" x 4" x 5" 14" x 4" x 5" 14" x 4" x 5"



21" x 13" x 5" 28" x 13" x 5" 28" x 13" x 5" 29" x 18" x 7" 29" x 18" x 7"

29" x 18" x 14" 29" x 18" x 14" 29" x 18" x 14" 29" x 18" x 14" 29" x 18" x 21" 29" x 18" x 21" 29" x 18" x 28"


WD

H

A

B

��


Rush shipment is 48 hours, or less, ARO with a 20% premium added.PG P/N H.P. Ohms Weight W D H A B List $ ea.442-1 0.5 615 4.2 13 $169.00 Options:442-2 0.75 439 5.8 13 $169.00 For terminal block connection, add $18 NET. Add "-TB"442-3 1 342 5.8 13 $169.00 to part number.442-4 1.5 237 7.5 12 5 $221.00442-5 2 181 7.5 12 5 $221.00 For resistor overheat thermal sensing switch, add $12 NET.442-6 3 128 8.6 12 8 $299.00 Specify normally open (NO) or normally closed (NC) by 442-7 5 81 12.6 12 11 $390.00 adding "-NO" or "-NC" to part number.442-8 7.5 56 15.8 19 8 $553.00442-9 10 44 18.8 19 11 $670.00 For outdoor enclosures, add 25%. Add "-W" to part number.442-10 15 29 24.4 26 11 $992.00 (Outdoor are ANSI-61 gray)442-11 20 23 32.3 27.5 14 $1,083.00442-12 25 18 32.7 27.5 14 $1,091.00 For ANSI-61 gray powder coat enclosure, add 15%. Add442-13 30 15 33.8 27.5 14 $1,143.00 "-PC" to part number.442-14 40 12 61.8 27.5 14 $1,908.00442-15 50 9.5 65.4 27.5 14 $2,028.00 Construction notes :442-16 60 8 67.6 27.5 14 $2,132.00 Mill galvanized indoor enclosures with ventilated covers.442-17 75 6.4 98.1 27.5 14 $2,965.00442-18 100 5 130.8 27.5 14 $3,902.00 Resistance values are plus or minus 10%.442-19 125 4 135.2 27.5 14 $4,110.00442-20 150 3.9 166.4 27.5 14 $5,793.00 * All terminals, terminal hardware and connection jumpers

are corrosion resistant.




21" x 13" x 5" 21" x 13" x 5"

14" x 7" x 5" 14" x 7" x 5" 14" x 13" x 5" 14" x 13" x 5"


14" x 4" x 5" 14" x 4" x 5" 14" x 4" x 5"



28" x 13" x 5" 29" x 18" x 7" 29" x 18" x 7" 29" x 18" x 7" 29" x 18" x 14" 29" x 18" x 14" 29" x 18" x 14" 29" x 18" x 21" 29" x 18" x 28" 29" x 18" x 28" 29" x 18" x 20"


WD

H

A

B

��


Rush shipment is 48 hours, or less, ARO with a 20% premium added.PG P/N H.P. Ohms Weight W D H A B List $ ea.445-1A 0.5 615 4.2 13 $169.00 Options:445-2A 0.75 439 5.8 13 $169.00 For terminal block connection, add $18 NET. Add "-TB"445-3A 1 342 7.5 12 5 $221.00 to part number.445-4A 1.5 237 8.5 12 8 $299.00445-5A 2 181 8.5 12 8 $299.00 For resistor overheat thermal sensing switch, add $12 NET.445-6A 3 128 12.4 12 11 $390.00 Specify normally open (NO) or normally closed (NC) by 445-7A 5 81 18.2 19 11 $670.00 adding "-NO" or "-NC" to part number.445-8A 7.5 56 22.2 26 11 $855.00445-9A 10 44 23.8 26 11 $992.00 For outdoor enclosures, add 25%. Add "-W" to part number.

445-10A 15 29 34.1 27.5 14 $1,148.00 * (Outdoor are ANSI-61 gray)445-11A 20 23 59.6 27.5 14 $1,783.00445-12A 25 18 61.7 27.5 14 $1,893.00 For ANSI-61 gray powder coat enclosure, add 15%. Add445-13A 30 15 69.6 27.5 14 $2,259.00 "-PC" to part number.445-14A 40 12 85.9 27.5 14 $2,992.00445-15A 50 9.5 101.1 27.5 14 $3,722.00 * Construction notes :445-16A 60 8 104.2 27.5 14 $3,290.00 Mill galvanized indoor enclosures with ventilated covers.445-17A 75 6.4 131.2 27.5 14 $3,936.00445-18A 100 5 169.1 27.5 14 $5,100.00 Resistance values are plus or minus 10%.445-19A 125 3.9 274.1 27.5 14 $8,532.00





29" x 18" x 35" 29" x 18" x 35"

29" x 18" x 14" 29" x 18" x 21" 29" x 18" x 28"

29" x 18" x 14" 29" x 18" x 14" 29" x 18" x 14" 29" x 18" x 14"

21" x 13" x 5" 28" x 13" x 5" 28" x 13" x 5" 29" x 18" x 7"



14" x 4" x 5" 14" x 4" x 5" 14" x 7" x 5"

14" x 13" x 5" 14" x 13" x 5" 14" x 13" x 5"


WD

H

A

B

��


Rush shipment is 48 hours, or less, ARO with a 20% premium added.PG P/N H.P. Ohms Weight W D H A B List $ ea.445-1 0.5 615 7.7 12 5 $221.00 Options:445-2 0.75 439 7.6 12 5 $221.00 For terminal block connection, add $18 NET. Add "-TB"445-3 1 342 8.6 12 8 $299.00 to part number.445-4 1.5 237 12.3 12 11 $390.00445-5 2 181 14.2 19 8 $507.00 For resistor overheat thermal sensing switch, add $12 NET.445-6 3 128 15.2 19 8 $553.00 Specify normally open (NO) or normally closed (NC) by 445-7 5 81 21.6 26 11 $855.00 adding "-NO" or "-NC" to part number.445-8 7.5 56 30.1 27.5 14 $1,083.00445-9 10 44 34.8 27.5 14 $1,265.00 * For outdoor enclosures, add 25%. Add "-W" to part number.445-10 15 29 57.9 27.5 14 $1,705.00 (Outdoor are ANSI-61 gray)445-11 20 23 68.3 27.5 14 $2,181.00445-12 25 18 74.9 27.5 14 $2,493.00 For ANSI-61 gray powder coat enclosure, add 15%. Add445-13 30 15 98.1 27.5 14 $2,965.00 "-PC" to part number.445-14 40 12 101.5 27.5 14 $3,121.00445-15 50 9.5 138.3 27.5 14 $4,225.00 * Construction notes :445-16 60 8 143.3 27.5 14 $4,459.00 * Mill galvanized indoor enclosures with ventilated covers.445-17 75 6.4 209.5 27.5 14 $7,050.00445-18 100 5 254.1 27.5 14 $7,952.00 Resistance values are plus or minus 10%.





29" x 18" x 49"

29" x 18" x 21" 29" x 18" x 28" 29" x 18" x 28" 29" x 18" x 35"

29" x 18" x 14" 29" x 18" x 14" 29" x 18" x 21"

28" x 13" x 5" 29" x 18" x 7" 29" x 18" x 7" 29" x 18" x 14"



14" x 7" x 5" 14" x 7" x 5"

14" x 13" x 5" 14" x 13" x 5" 21" x 13" x 5" 21" x 13" x 5"


WD

H

A

B

��


Rush shipment is 48 hours, or less, ARO with a 20% premium added.PG P/N H.P. Ohms Weight W D H A B List $ ea.550-1A 0.5 956 7.8 12 5 $280.00 Options:550-2A 0.75 695 9.1 12 5 $280.00 For terminal block connection, add $18 NET. Add "-TB"550-3A 1 546 8.7 12 8 $299.00 to part number.550-4A 1.5 364 12.3 12 11 $390.00550-5A 2 283 14.1 19 8 $507.00 For resistor overheat thermal sensing switch, add $12 NET.550-6A 3 196 15.1 19 8 $553.00 Specify normally open (NO) or normally closed (NC) by 550-7A 5 125 22.4 26 11 $901.00 adding "-NO" or "-NC" to part number.550-8A 7.5 85 29.7 27.5 14 $1,083.00550-9A 10 70 33.8 27.5 14 $1,265.00 * For outdoor enclosures, add 25%. Add "-W" to part number.550-10A 15 45 62.8 27.5 14 $1,908.00 (Outdoor are ANSI-61 gray)550-11A 20 36 63.5 27.5 14 $1,947.00550-12A 25 28 97.1 27.5 14 $2,955.00 For ANSI-61 gray powder coat enclosure, add 15%. Add550-13A 30 24 108.4 27.5 14 $3,488.00 "-PC" to part number.550-14A 40 19 130.4 27.5 14 $4,478.00550-15A 50 15 131.2 27.5 14 $3,936.00 Construction notes :550-16A 60 12 149.8 27.5 14 $4,815.00 Mill galvanized indoor enclosures with ventilated covers.550-17A 75 10 179.1 27.5 14 $5,535.00 *






28" x 13" x 5" 29" x 18" x 7" 29" x 18" x 7" 29" x 18" x 14"

29" x 18" x 35"

29" x 18" x 21" 29" x 18" x 21"

29" x 18" x 14" 29" x 18" x 21"


14" x 7" x 5" 14" x 7" x 5" 14" x 13" x 5"


29" x 18" x 28"

14" x 13" x 5" 21" x 13" x 5" 21" x 13" x 5"

29" x 18" x 28"


WD

H

A

B

��


Rush shipment is 48 hours, or less, ARO with a 20% premium added.PG P/N H.P. Ohms Weight W D H A B List $ ea.550-1 0.5 956 9.1 12 5 $280.00 Options:550-2 0.75 695 8.7 12 8 $299.00 For terminal block connection, add $18 NET. Add "-TB"550-3 1 546 12.3 12 11 $390.00 to part number.550-4 1.5 364 14.1 19 8 $507.00550-5 2 283 17.4 19 11 $670.00 For resistor overheat thermal sensing switch, add $12 NET.550-6 3 196 21.8 26 11 $901.00 Specify normally open (NO) or normally closed (NC) by 550-7 5 125 29.5 27.5 14 $1,083.00 adding "-NO" or "-NC" to part number.550-8 7.5 85 55.1 27.5 14 $1,739.00550-9 10 70 59.9 27.5 14 $1,921.00 For outdoor enclosures, add 25%. Add "-W" to part number.550-10 15 45 69.1 27.5 14 $2,189.00 * (Outdoor are ANSI-61 gray)550-11 20 36 105.8 27.5 14 $3,340.00550-12 25 28 116.3 27.5 14 $3,839.00 For ANSI-61 gray powder coat enclosure, add 15%. Add550-13 30 24 129.2 27.5 14 $3,819.00 "-PC" to part number.550-14 40 19 198.7 27.5 14 $7,124.00550-15 50 15 246.6 27.5 14 $7,875.00 * Construction notes :550-16 60 12 278.7 27.5 14 $9,490.00 * Mill galvanized indoor enclosures with ventilated covers.






28" x 13" x 5"

29" x 18" x 28"

29" x 18" x 7" 29" x 18" x 14" 29" x 18" x 14"

29" x 18" x 28"

29" x 18" x 14" 29" x 18" x 21" 29" x 18" x 21"

29" x 18" x 28" 29" x 18" x 28"

21" x 10" x 5" 21" x 13" x 5"


14" x 7" x 5" 14" x 10" x 5" 14" x 13" x 5"



WD

H

A

B

��


Rush shipment is 48 hours, or less, ARO with a 20% premium added.PG P/N H.P. Ohms Weight W D H A B List $ ea.552-1A 0.5 956 5.2 13 $169.00 Options:552-2A 0.75 695 5.2 13 $169.00 For terminal block connection, add $18 NET. Add "-TB"552-3A 1 546 5.2 13 $169.00 to part number.552-4A 1.5 364 5.8 13 $169.00552-5A 2 283 7.5 12 5 $221.00 For resistor overheat thermal sensing switch, add $12 NET.552-6A 3 196 7.5 12 5 $221.00 Specify normally open (NO) or normally closed (NC) by 552-7A 5 125 8.6 12 8 $299.00 adding "-NO" or "-NC" to part number.552-8A 7.5 85 12.5 12 11 $390.00552-9A 10 70 14.5 19 8 $507.00 For outdoor enclosures, add 25%. Add "-W" to part number.552-10A 15 45 18.5 19 8 $715.00 (Outdoor are ANSI-61 gray)552-11A 20 36 21.9 26 11 $901.00552-12A 25 28 24.4 26 11 $992.00 For ANSI-61 gray powder coat enclosure, add 15%. Add552-13A 30 24 32.3 27.5 14 $1,070.00 "-PC" to part number.552-14A 40 19 55.5 27.5 14 $1,609.00552-15A 50 15 57.3 27.5 14 $1,700.00 Construction notes :552-16A 60 12 61.7 27.5 14 $1,908.00 Mill galvanized indoor enclosures with ventilated covers.552-17A 75 10 65.4 27.5 14 $2,028.00552-18A 100 8 101.4 27.5 14 $3,147.00 Resistance values are plus or minus 10%.552-19A 125 6 111.1 27.5 14 $3,605.00552-20A 150 5 136.6 27.5 14 $4,209.00 All terminals, terminal hardware and connection jumpers 552-21A 200 4 192.1 27.5 14 $6,458.00 are corrosion resistant.






14" x 4" x 5" 14" x 4" x 5" 14" x 4" x 5" 14" x 4" x 5" 14" x 7" x 5" 14" x 7" x 5" 14" x 13" x 5" 14" x 13" x 5" 21" x 13" x 5" 21" x 13" x 5"

29" x 18" x 14" 29" x 18" x 14" 29" x 18" x 14"

28" x 13" x 5" 28" x 13" x 5" 29" x 18" x 7"

29" x 18" x 14"

29" x 18" x 21" 29" x 18" x 21" 29" x 18" x 28" 29" x 18" x 35"


WD

H

A

B

��


Rush shipment is 48 hours, or less, ARO with a 20% premium added.PG P/N H.P. Ohms Weight W D H A B List $ ea.552-1 0.5 956 4.2 13 $169.00 Options:552-2 0.75 695 4.2 13 $169.00 For terminal block connection, add $18 NET. Add "-TB"552-3 1 546 7.6 12 5 $221.00 to part number.552-4 1.5 364 7.6 12 5 $221.00552-5 2 283 7.7 12 5 $221.00 For resistor overheat thermal sensing switch, add $12 NET.552-6 3 196 8.5 12 8 $299.00 Specify normally open (NO) or normally closed (NC) by 552-7 5 125 12.4 12.0 11 $390.00 adding "-NO" or "-NC" to part number.552-8 7.5 85 15.4 19.0 8 $553.00552-9 10 70 18.2 19.0 11 $670.00 For outdoor enclosures, add 25%. Add "-W" to part number.552-10 15 45 25.1 26.0 11 $946.00 (Outdoor are ANSI-61 gray)552-11 20 36 31.1 27.5 14 $1,083.00552-12 25 28 34.1 27.5 14 $1,148.00 * For ANSI-61 gray powder coat enclosure, add 15%. Add552-13 30 24 54.1 27.5 14 $1,544.00 "-PC" to part number.552-14 40 19 55.6 27.5 14 $1,609.00552-15 50 15 69.7 27.5 14 $2,259.00 Construction notes :552-16 60 12 90.6 27.5 14 $2,643.00 Mill galvanized indoor enclosures with ventilated covers.552-17 75 10 97.4 27.5 14 $2,947.00552-18 100 8 144.6 27.5 14 $4,599.00 Resistance values are plus or minus 10%.552-19 125 6 149.8 27.5 14 $4,786.00 *552-20 150 5 166.3 27.5 14 $5,613.00 All terminals, terminal hardware and connection jumpers 552-21 200 4 236.4 27.5 14 $7,037.00 are corrosion resistant.






14" x 4" x 5" 14" x 4" x 5" 14" x 7" x 5" 14" x 7" x 5" 14" x 7" x 5"

14" x 13" x 5" 14" x 13" x 5" 21" x 13" x 5" 21" x 13" x 5" 28" x 13" x 5"

29" x 18" x 14" 29" x 18" x 21" 29" x 18" x 21"

29" x 18" x 7" 29" x 18" x 7" 29" x 18" x 14" 29" x 18" x 14"

29" x 18" x 28" 29" x 18" x 28" 29" x 18" x 28" 29" x 18" x 49"


WD

H

A

B

��


Rush shipment is 48 hours, or less, ARO with a 20% premium added.PG P/N H.P. Ohms Weight W D H A B List $ ea.555-1A 0.5 956 9.1 12 5 $280.00 Options:555-2A 0.75 695 9.1 12 5 $280.00 For terminal block connection, add $18 NET. Add "-TB"555-3A 1 546 7.5 12 5 $221.00 to part number.555-4A 1.5 364 8.9 12 8 $299.00555-5A 2 283 9.1 12 8 $299.00 For resistor overheat thermal sensing switch, add $12 NET.555-6A 3 196 12.3 12 11 $390.00 Specify normally open (NO) or normally closed (NC) by 555-7A 5 125 17.8 19 11 $670.00 adding "-NO" or "-NC" to part number.555-8A 7.5 85 21.6 26 11 $855.00555-9A 10 70 23.3 26 11 $992.00 For outdoor enclosures, add 25%. Add "-W" to part number.555-10A 15 45 34.6 27.5 14 $1,265.00 * (Outdoor are ANSI-61 gray)555-11A 20 36 57.3 27.5 14 $1,674.00555-12A 25 28 57.9 27.5 14 $1,705.00 For ANSI-61 gray powder coat enclosure, add 15%. Add555-13A 30 24 61.6 27.5 14 $1,871.00 "-PC" to part number.555-14A 40 19 80.1 27.5 14 $2,727.00555-15A 50 15 98.1 27.5 14 $2,965.00 Construction notes :555-16A 60 12 101.4 27.5 14 $3,121.00 Mill galvanized indoor enclosures with ventilated covers.555-17A 75 10 140.5 27.5 14 $5,431.00555-18A 100 8 203.6 27.5 14 $6,099.00 Resistance values are plus or minus 10%.555-19A 125 6 210.9 27.5 14 $6,437.00







14" x 7" x 5" 14" x 7" x 5" 14" x 7" x 5" 14" x 13" x 5" 14" x 13" x 5" 14" x 13" x 5" 21" x 13" x 5" 28" x 13" x 5" 28" x 13" x 5" 29" x 18" x 7"

29" x 18" x 14" 29" x 18" x 14" 29" x 18" x 14" 29" x 18" x 14"

29" x 18" x 42" 29" x 18" x 42"

29" x 18" x 21" 29" x 18" x 21" 29" x 18" x 28"


WD

H

A

B

��


Rush shipment is 48 hours, or less, ARO with a 20% premium added.PG P/N H.P. Ohms Weight W D H A B List $ ea.555-1 0.5 956 9.1 12 5 $280.00 Options:555-2 0.75 695 9.1 12 5 $280.00 For terminal block connection, add $18 NET. Add "-TB"555-3 1 546 8.7 12 8 $299.00 to part number.555-4 1.5 364 12.3 12 11 $390.00555-5 2 283 14.1 19 8 $507.00 For resistor overheat thermal sensing switch, add $12 NET.555-6 3 196 15.1 19 8 $553.00 Specify normally open (NO) or normally closed (NC) by 555-7 5 125 22.4 26 11 $901.00 adding "-NO" or "-NC" to part number.555-8 7.5 85 29.8 27.5 14 $1,083.00555-9 10 70 33.7 27.5 14 $1,265.00 * For outdoor enclosures, add 25%. Add "-W" to part number.555-10 15 45 62.7 27.5 14 $1,908.00 (Outdoor are ANSI-61 gray)555-11 20 36 63.5 27.5 14 $1,947.00555-12 25 28 74.9 27.5 14 $2,470.00 * For ANSI-61 gray powder coat enclosure, add 15%. Add555-13 30 24 77.2 27.5 14 $2,587.00 * "-PC" to part number.555-14 40 19 127.4 27.5 14 $4,346.00555-15 50 15 135.3 27.5 14 $4,110.00 Construction notes :555-16 60 12 145.2 27.5 14 $4,610.00 Mill galvanized indoor enclosures with ventilated covers.555-17 75 10 179.2 27.5 14 $5,535.00 *555-18 100 8 281.9 27.5 14 $9,221.00 Resistance values are plus or minus 10%.







14" x 7" x 5" 14" x 7" x 5"

14" x 13" x 5" 14" x 13" x 5" 21" x 13" x 5" 21" x 13" x 5"

29" x 18" x 14" 29" x 18" x 14" 29" x 18" x 14"

28" x 13" x 5" 29" x 18" x 7" 29" x 18" x 7" 29" x 18" x 14"

29" x 18" x 49"

29" x 18" x 21" 29" x 18" x 28" 29" x 18" x 28" 29" x 18" x 35"


WD

H

A

B

4750 Olympic Blvd ? Erlanger, Kentucky 41018 ? USA Toll free 800-537-6144 ? Telephone (859) 283-0778 Facsimile (859) 283-2978 www.postglover.com ? www.ipcresistors.com

Installation Instructions -Dynamic Braking Resistors

POST GLOVER DYNAMIC BRAKING RE-SISTORS consist of through-rod mounted resistor tubes installed into mill-galvanized or ANSI-61 gray powder coated enclosures. All resistor tubes are factory interconnected using stainless steel hardware. Once you have unpacked the resistor and Inspected it for signs of shipping damage, you may INSTALL THE UNIT AS FOL-LOWS: • Remove the screws that attach the ven-

tilated cover to the unit. Most units have four screws, larger units have six or more screws. Units up to 28” wide may be wall mounted as shown in FIGURE 1, or roof mounted as shown in FIGURE 2.

• Resistor tubes (and through-rods) must be horizontal for proper cooling. Fasten enclosure with four 3/8” bolts.

• All larger units (above approximately 5KW) are 29” wide and must be roof or floor mounted as shown in FIGURE 3.

Fasten enclosure with four 1/2” bolts.

CAUTION ! THE HEAT FROM THE RESISTORS RISES STRAIGHT UP FROM

THE RESISTOR TUBES. • Installation should be performed by a

qualified electrician per applicable in-dustry/local codes including NEC/NFPA 70.

• There should be at least 24” of free space above the resistor and the area should be free of any combustible mate-rials, fire sprinklers or other materials affected by heat.

• There should be at least 6” of space between the ends of the resistor enclo-sure and adjacent components.

• There should be at least 12” of space between the ventilated sides of the re-sistor enclosure and any nearby compo-nents.

• If there is concern about the resistor enclosure conducting heat to its mount-ing surface, then space the unit off its mounting surface approximately 1/4” using flat washers or an extra nut on each mounting bolt. See FIGURE 4.

Remove Instruction Sheet Before Installation

All enclosures feature several convenient conduit “knockouts” for easy wiring. Choose the appropriate location, remove the knock-out and pull the wire into the resistor enclo-sure for connection to the resistor. If wiring directly to the resistor terminals, Post Glover recommends using at least 150 degree C rated Teflon or SRML (silicon rub-ber motor lead) wiring to prevent melting or burning of the insulation. Avoid running the wiring on top of, or too close to, the hot re-sistor tubes. It is much cooler underneath the resistors. Most units use #10 terminal hardware, but larger ratings use 1/4” and even 5/16“ terminal hardware. The following table gives suggested wire size for copper conductors based on the insulating rating of the wire.

* This size terminal block uses ring termi-nals sized for #8 screw. Units featuring the Post Glover terminal block option may be wired to the terminal block using standard 75 degree C rated wire.

If an ohmmeter is available, check the value of the resistor and compare it to the rating shown on the nameplate to ensure you have the proper resistor. Connecting a resistor with too low of an ohm rating can damage the dynamic braking transistor (chopper) or the adjustable frequency drive. If your unit features the Post Glover thermal switch option, connect your control leads to the two crimp-type terminals provided on the thermal switch. If you have an ohmmeter, check the continuity of the thermal switch to confirm that it is either normally closed or normally open as required. Both types are available.

TIGHTEN ALL CONNECTIONS SE-CURELY. LOOSE CONNECTIONS ARE A MAJOR SOURCE OF POWER RESIS-

TOR FAILURES.

Install the ventilated cover and secure with the screws provided. TIGHTEN SCREWS SECURELY! Your Post Glover Dynamic Braking Resis-tor should not require any maintenance, but should be checked periodically for loose connections and the accumulation of dust and dirt. Any excess dust or dirt that collects on the unit should be removed as it could prevent proper cooling or cause tracking to ground. THE RESISTOR SHOULD NOT GLOW RED UNDER NORMAL OPERATING CON-DITIONS! If the unit glows or seems to run excessively hot, you probably need a higher wattage rated unit (which is available). Please contact Post Glover for further assis-tance.

Up to 30 A #14* #10*

Up to 85 A #6 #4

Up to 170 A #2 #2/0

Suggested Wire Gauge

150°C 75°C

Installation Instructions -Dynamic Braking Resistors

4750 Olympic Blvd ? Erlanger, Kentucky 41018 ? USA Toll free 800-537-6144 ? Telephone (859) 283-0778 Facsimile (859) 283-2978 www.postglover.com ? www.ipcresistors.com

Remove Instruction Sheet Before Installation

dynamic braking resistors allen-bradley 1336 drives · dynamic braking resistors allen-bradley 1336...

Documents