eco instrument (ns0081046-m) computer servo type...
TRANSCRIPT
ECO INSTRUMENT (NS0081046-M) EI-1003B
215, Jalan S2 C9, Seksyen C, Green Technology Park, Seremban 2, 70300 Seremban. Negeri Sembilan. Malaysia. Tel: +606-6030 951 Fax: +606-6030 952
Email: [email protected] Website: http://www.ecoinstrument.com.my
Computer Servo Type Universal Testing Machine
Available Typical of Specimen Fixture
Equipment summary:
EI-1003B Computer Servo Type Universal Testing Machine (large deformation) is designed by mechanical-electrical integration, composition of the force-measuring sensor, transmitter, microprocessor, mechanism of load drive, computer and color inkjet printer. High-precision electronic motor can be set to five-speed, the components are connected by plug-way, Floor-standing models. It is taken account of modern industrial design and ergonomics in modeling and coating. It can be tested all the materials in stretch, compression, bending, shear, embedded relay, peeling, tearing, crack, etc, such as rubber, plastics, leather, metal, nylon wire, fabric, paper, aerospace, packaging, construction, petrochemical, electrical, vehicle, etc
Corresponding Standard:
1. GB/T4689.20-1996 measuring fastness of leather’s adhesion
2. QB/T2710-2005 measuring leather’s expansion and the rate of elongation
3. QB/T2711-2005 measuring tear force of leather
4. QB/T2712-2005 measuring leather’s strength and stretch of spherical crack test
5. TAPPI T-494, TAPPI T829, ISO 1924, ISO12625-4, AS/NZ1301.448s, BS EN ISO1924-2, CPPA D34, DIN 53112, SCAN P38
6. Breaking strength (sample method) GB/TT3923.1, ISO13934.1, ASTM D5035
7. (Grab method) GB/T3923.2, ISO13934.2, ASTM D5034
8. Tear strength (tongue-shaped tear) GB/T3917.2, ISO13937.2, ASTM D2261
9. (Trapezoidal tear) GB/T3912.3, ISO9074.4, ASTM D5587
10. Seam Slippage GB/T13772.1/2/3, ISO13936.1/2, ASTM D434
Tensile Test 180 / 90 degree grip peel fixture
Bending Test Compression Test
ECO INSTRUMENT (NS0081046-M) EI-1003B
215, Jalan S2 C9, Seksyen C, Green Technology Park, Seremban 2, 70300 Seremban. Negeri Sembilan. Malaysia. Tel: +606-6030 951 Fax: +606-6030 952
Email: [email protected] Website: http://www.ecoinstrument.com.my
11. Peel strength FZ/T01085, ASTM D2724/3936, AATCC 136, FZ/T80007.1, FZ/T01010, FZ/T60011
12. Ball Bursting GB/T19976, FZ/T01030, ISO3303, ASTM D3787/6796
13. Elastic Recovery FZ/T70005, FZ/T70006, BS 4952
14. Single Yarn Strength GB/T3916/14344, ISO2062, ASTM D 2256
15. Other standards GB4689.6, GB/T13763, GB/T13773, GB/T14800
16. GB/T15788, GB/T16989, FZ/T01031, FZ/T20019
17. FZ/T60005, FZ/T60006, FZ/T70007, ISO 13935.1/2
18. ASTM D1683, ASTM D4964, ASTM D5733/5735, BS 3320
Technical Parameters:
Model EI-1003B
Load Frame 1,000kgf
Maximum load 100kg
Accuracy of force ≤ 1%
Resolution of force 1/200000
Power magnification 7 automatic switching
Displacement resolution 1/1000
Accuracy of displacement ≤ 1%
Resolution of extensometer 1/1000
Accuracy of extensometer ≤ 1%
Range of speed 0.01 ~ 250mm/min (according to the needs of customer)
Effective displacement 800mm (excluding fixture)
Testing width 400mm
Power supply 2kW, 220VAC, 50Hz
Machine size 120(L) x 75(W) x 180(H) cm
Machine weight Approx. 500kg
ECO INSTRUMENT (NS0081046-M) EI-1003B
215, Jalan S2 C9, Seksyen C, Green Technology Park, Seremban 2, 70300 Seremban. Negeri Sembilan. Malaysia. Tel: +606-6030 951 Fax: +606-6030 952
Email: [email protected] Website: http://www.ecoinstrument.com.my
Specifications: 1. High-precision Load cell. Accurate Forces within ± 1%. 2. High-precision 24 bits A / D, sampling frequency 200Hz 3. Power System: AC Servo Motor + Driver + CAVEX + precision ball screw 4. Control System: it is more precise using Pulse Command control modem; the range in speed control is
0.01 ~ 250 mm / min. The board of iron can be adjusting to fast and slow by the control board. It is automatically saved after testing.
5. Data transmission: RS232 Transfer
6. Display: Windows 7 test software. 7. Easy to control five speed and calibration system. 8. Test software can precision control in position, speed, rate of load force and rate of stress, satisfy the
different requirements of test. 9. Test space: Testing width is about 400 mm (standard), moving space of active iron 1000mm (excluding
fixtures) 10. Displacement: Coder 2500 P / R, increase four-time accuracy. Adopt coder that has strong anti-jamming
capability, displacement resolution 0.001mm.Small deformation: Metal extensometers, parsing 0.001mm. 11. Safe equipment: The system would shut down if overload or over-trip
Software Feature:
1. The software description about desktop computer type servo tensile testing machine
a. Function of standard modular: provide users with the necessary applications to the test, covering GB, ASTM, DIN, JIS BS…. And other testing standard specification.
b. Tested product information: provide users with the data to set about the products, one time to input and re-use permanently for improving the accuracy, the data can be corrected by the formula automatically.
c. Dual-report editor: provide users with the reported format that users choose (testing program add EXCEL reported format, Extend the previous single pattern of statements)
d. The data’s unit of length and force can be exchanged, unit of force is T, Kg, N, kN, g, lb, unit of length is mm, cm, inch.
e. Auto-optimization of graphic scale, display the best measurement of graphics. It can test the moving exchange in graphics; it has the load –displacement, load – time, displacement – time, stress – strain load – 2 points extending maps and lots of graph compared.
f. Test results can be output in EXCEL, WORD & PDF format.
g. Testing result can be automatically preserved or manual preserved, after the test, it can automatically calculate the most strength, up and down yield strength, loop method, best method, non-proportional extended strength, tensile strength, compressive strength, tensile strength at any point, constant load extension, elastic modulus, rate of elongation, peel range of maximum force, minimum force, average force, total energy, bending modulus, x% load in break displacement, load x% in break displacement and so on. The test data can be stored in any disk.
h. Software has a capability that can output the before data.
ECO INSTRUMENT (NS0081046-M) EI-1003B
215, Jalan S2 C9, Seksyen C, Green Technology Park, Seremban 2, 70300 Seremban. Negeri Sembilan. Malaysia. Tel: +606-6030 951 Fax: +606-6030 952
Email: [email protected] Website: http://www.ecoinstrument.com.my
2. Items can be tested in the Desktop computer type servo tensile testing machine Common items: (display data and calculation) Tensile stress Tensile strength Rate of elongation at break Fixed stress Rate of stress at break Stress Strength Tear strength The value of force at any point Rate of elongation at any point Pull-out strength Force of adhesion and the peak of force
Computer servo control material testing machine software operation interface
1. Choose you need units, setting==>unit
2. There are so many unit, just choose you need.
ECO INSTRUMENT (NS0081046-M) EI-1003B
215, Jalan S2 C9, Seksyen C, Green Technology Park, Seremban 2, 70300 Seremban. Negeri Sembilan. Malaysia. Tel: +606-6030 951 Fax: +606-6030 952
Email: [email protected] Website: http://www.ecoinstrument.com.my
3. Connect computer and software online. Setting==>Online==>COM1 or COM2..., after it show success connected.
4. Test results
ECO INSTRUMENT (NS0081046-M) EI-1003B
215, Jalan S2 C9, Seksyen C, Green Technology Park, Seremban 2, 70300 Seremban. Negeri Sembilan. Malaysia. Tel: +606-6030 951 Fax: +606-6030 952
Email: [email protected] Website: http://www.ecoinstrument.com.my
5. Computer servo control material testing machine test curve
STANDARD CONTROL MODES
SPECIAL CONTROL MODES:
ECO INSTRUMENT (NS0081046-M) EI-1003B
215, Jalan S2 C9, Seksyen C, Green Technology Park, Seremban 2, 70300 Seremban. Negeri Sembilan. Malaysia. Tel: +606-6030 951 Fax: +606-6030 952
Email: [email protected] Website: http://www.ecoinstrument.com.my
Sample Report:
Eco Instrument Address: 215, Jalan S2 C9, Seksyen C, Green Technology Park, Seremban 2,
70300 Seremban. Negeri Sembilan. Malaysia. Tel: +606-6030 951 Fax: +606-6030 952
Material Testing Report
Test No : 1307001 Test Date : 07-02-2016 Lot No : 324890 Material : Rubber Operator : Mohd. Temperature : 26 C Remarks : Good.
No. Force @
Peak (N)
Elong. @ Peak (mm)
Tensile Strength (MPa)
Tensile Strength
(%)
Area (mm^2)
Gauge Length (mm)
1 12008.243 105.642 3821.847 422.567 3.142 25.000 2 11528.698 87.232 3669.223 348.929 3.142 25.000
Maximum 12008.243 105.642 3821.847 422.567 3.142 25.000 Minimum 11528.698 87.232 3669.223 348.929 3.142 25.000
Mean 11768.470 96.437 3745.535 385.748 3.142 25.000
Tested By: Approved By:
ECO INSTRUMENT (NS0081046-M) EI-1003B
215, Jalan S2 C9, Seksyen C, Green Technology Park, Seremban 2, 70300 Seremban. Negeri Sembilan. Malaysia. Tel: +606-6030 951 Fax: +606-6030 952
Email: [email protected] Website: http://www.ecoinstrument.com.my
Standard Main Configuration:
Name Description Quantity
Load Frame 1,000kg (10kN) 1 set
Load cell High Precision Performance Celtron, USA Load Cell: 100kg
1 set
Motor Panasonic, Japan AC Servo Motor 1 set
Speed reduction High Grade Reducer 1 set
Software Interface card, English version 1 CD
Grip and accessories
1. Tensile Grip 2. Compression Fixture 3. Two Point Extensometer (Optional)
1 set 1 set 1 set
Safety Protection saftey door 1 set
Tool kits Maintenance tool 1 set
Manual Testing machine operation manual and software 1 set
Branded
High performance Computer System or higher
HP3335 AMD190
2GB DDR Memory
500GB HDD
Com Port / PCI Slot
DVD writer
P/S 2 keyboard & mouse
19” LCD Screen
Microsoft Window OEM window license
A4 Inkjet Color Printer.
1 set