ei shaft ace - erbessd-instruments.com · ei-alignment ei-shaft acetm ei-shaft acetm is the...
TRANSCRIPT
Shaft Alignment System
EI-
2
EI-ALIGNMENT EI-SHAFT ACETM
EI-Shaft AceTM is the simplest & easiest to use laser shaft alignment experience available. The simple 5-Step alignment process is so intuitive that most users can start performing laser alignments right out of the box. Microsoft Windows® ready. The software can be installed on on any Windows OS tablet, laptop or PC.
EI-Shaft AceTM
the world’s fastest & easiest to use laser shaft alignment system.
System AdvantagesPrecision alignment increases equipment reliability and uptime.
Reduces costs associated with unplanned failures and premature wear.
Reduces machine energy consumption.
Equipped with Wireless Bluetooth® communications for safetyFaster and more efficient than aligning with dial indicators
Sensors UnitsEI-Shaft Ace sensors use the latest digital Bluetooth® data processing technology. 30mm CCD-detectors to accomodate even the most difficult alignment set-ups. The system produces precise, repeatable measurments and provides greater immunity from external interference factors, such as vibration and ambient light.
EI-Shaft AceTM is a trademark of Erbessd Reliability™ & developed by VIBRO-LASER Instruments Corporation as VIBRO-LASER®. All the trademarks are the property of their respective owners.
5-Step-SimpleTM alignment process
3
Technical SpecsMaterial Anodized aluminium
Dimensions 90 x 60 x 32 mm
Laser radiation
Laser power
Diode laser with 635 nm wavelength, class II < 1 mW
Measurement distance
Up to 10m
Detector length 30mm
Detector type Digital CCD detector
Measurement accuracy
0.3% ± 7 m
Inclinometer 0.1
Degree of protection
IP65
Operating time up to 20 hours
Bluetooth 4.0
Operating temperature 14° F to 140° F (-10° C to +60° C)
Sensor units are fitted with compact, durable cases - well suited for the most challenging confined spaces and harsh environments. Large CCD detectors also eliminate any need to pre-align machines before using the sensors.
Responsive Windows® interface with 3D animation
EI-ALIGNMENT EI-SHAFT ACETM
4
EI-ALIGNMENT EI-PULLEY ACETM
Sheave alignmentLaser alignment is easier and more accurate than labor-intensive string and straight-edge methods. Pulley AceTM significantly reduces downtime and the manpower needed to perform sheave alignments - resulting in increased uptime and labor savings.
Sheave laser alignment
systems improve machine
reliability and efficiency.
System AdvantagesRetro-Reflective alignment targets work indoors or outdoors using enhanced reflective technology. Laser lines are more easily visible in direct sunlight and adjustments are easier to make.
How it worksPulley ACE™ sheave alignment tool projects a plane of laser light parallel with the faces of drive and driven sheaves. Adjustable targets attach to the sheaves, intersect the laser beam and visually show any misalignment. The Retro-Reflective film on the center line of the target reflects the laser beam and “glows” for enhanced visibility and accuracy.
“You know you’re aligned when the green line glows.”- Ron Dinwiddie, Production Manager
Faster Set-ups
More Accurate Adjustments
Less Bearing Wear
5
EI-ALIGNMENT EI-PULLEY ACETM
Technical SpecsLaser Class II, <1mw
Vial 40 Arc Minute
Laser radiation
Beam Spread
Diode laser with laser wavelength 635 nm, class II60” @ 3’
Line Width Approx. 1/16” @ 30”
Magnets Nickel Plated, Rare Earth
Power 2 AAA Alkaline Batteries (5hrs)
Targets 3 – Retro-Reflective, Adjustable over 1”
Accuracy .070” or 7 times more accurate than industry standards.
Dimension: 1 3/4” x 6 3/4” x 5/8”
The reflective film shows the laser’s alignment line in “Real Time”. This is called “Positive Tracking”.
Reduce premature
wear or failure of pulleys, belts and bearings.
Decrease Vibration – Minimize Belt and Motor Bearing Wear.
Compact Size – Easy to use on small diameter sheaves.
10 Times Brighter – Can be used in direct sunlight
Use as a laser level – Check the height and flatness of motor and gear box mounting plates.
Includes:Pulley ACE™ System3 – Ret ro - Re f l e c t i v e , A d j u s ta b l e Alignment Targets1 – Foam Filled, Hard Carrying Case
EI-Pulley AceTM is a trademark of Erbessd Reliability™ & developed by VIBRO-LASER Instruments LLC All the trademarks are the property of their respective owners.
Service & Support Engineer
+1-877-223-4606 [email protected]
BUY ONLINE www.erbessdreliability.com
ALL IMAGES ARE FOR ILLUSTRATIVE PURPOSES ONLY. THE FINAL PRODUCT MAY VARY DEPENDING ON THE VERSION AND/OR THE IMPROVEMENTS MADE TO THE DEVICES OR COMPONENTS
© 2017 ERBESSD INSTRUMENTS LLC