en10297-1
DESCRIPTION
EN10297_1TRANSCRIPT
-
LABEDIN-Merkblatt 7, en
-
February 2003
English version
ICS 77.140.75
Management Centre: rue de Stassart 36, B-1050 Brussels
European Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr Normung
Seamless circular steel tubes for mechanical and generalengineering purposes Technical delivery conditions
Part 1: Non-alloy and alloy steel tubes
2003. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.
Ref. No. EN 10297-1 : 2003 E
Tubes sans soudure en acier pourutilisation en mcanique gnrale eten construction mcanique Condi-tions techniques de livraison Partie 1: Tubes en acier non alli etalli
Nahtlose kreisfrmige Stahlrohre frden Maschinenbau und allgemeinetechnische Anwendungen Techni-sche Lieferbedingungen Teil 1:Rohre aus unlegierten und legiertenSthlen
This European Standard was approved by CEN on 2002-10-16.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to any CENmember.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland,Ireland, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia,Spain, Sweden, Switzerland, and the United Kingdom.
EN 10297-1
-
Page 2EN 10297-1 : 2003
3
4
4
5
6
666
7788
9999
11111114212122222222
26262627
282829
3030303131313232323232
32
-
Page 3EN 10297-1 : 2003
33
34
35
37
38
41
41
-
Page 4EN 10297-1 : 2003
-
Page 5EN 10297-1 : 2003
-
Page 6EN 10297-1 : 2003
-
Page 7EN 10297-1 : 2003
-
Page 8EN 10297-1 : 2003
-
Page 9EN 10297-1 : 2003
-
Page 10EN 10297-1 : 2003
-
Page 11EN 10297-1 : 2003
-
Page 12EN 10297-1 : 2003
-
Page 13EN 10297-1 : 2003
-
Page 14EN 10297-1 : 2003
-
Page 15EN 10297-1 : 2003
-
Page 16EN 10297-1 : 2003
-
Page 17EN 10297-1 : 2003
-
Page 18EN 10297-1 : 2003
-
Page 19EN 10297-1 : 2003
-
Page 20EN 10297-1 : 2003
-
Page 21EN 10297-1 : 2003
-
Page 22EN 10297-1 : 2003
-
Page 23EN 10297-1 : 2003
-
Page 24EN 10297-1 : 2003
-
Page 25EN 10297-1 : 2003
-
Page 26EN 10297-1 : 2003
-
Page 27EN 10297-1 : 2003
-
Page 28EN 10297-1 : 2003
-
Page 29EN 10297-1 : 2003
-
Page 30EN 10297-1 : 2003
-
Page 31EN 10297-1 : 2003
-
Page 32EN 10297-1 : 2003
-
Page 33EN 10297-1 : 2003
-
Page 34EN 10297-1 : 2003
-
Page 35EN 10297-1 : 2003
-
Page 36EN 10297-1 : 2003
-
Page 37EN 10297-1 : 2003
-
Page 38EN 10297-1 : 2003
-
Page 39EN 10297-1 : 2003
-
Page 40EN 10297-1 : 2003
-
Page 41EN 10297-1 : 2003
Beuth Verlag GmbH2003-09-16T16:27:53+020012163 BerlinDIN Deutsches Institut fuer Normung e. V.Dokument ist zertifiziert