environment booklet
TRANSCRIPT
-
7/31/2019 Environment Booklet
1/44
EU 27 environmental
legislation for lightingA quick guide including selling arguments January 2009
-
7/31/2019 Environment Booklet
2/44
-
7/31/2019 Environment Booklet
3/44
3Philips LightingJanuary 2009
In this booklet you will find an overview of the main EU27 environmental
legislation currently effecting our Lamp, Gear and Luminaire business.
You will find a brief description of the legislation itself, what it means for
lighting, status, and sales arguments that can be used for each directive.
Philips is committed to sustainability and fully complies with or exceeds
all current legislation whilst also anticipating forthcoming legislation.
All legislation described provides a large opportunity to promote and
sell added value lamps, gear and luminaires.
The environment as an opportunity is here to stay. This booklet will
be updated periodically.
January 2009
Uplamping Pays,
Green Lamping Saves
Introduction
-
7/31/2019 Environment Booklet
4/44
-
7/31/2019 Environment Booklet
5/44
5Philips LightingJanuary 2009
1. The irst ive minutes 6
2. Selling arguments 10
3. Hazardous Substances (RoHS) 14
4. Waste (WEEE) 18
5. Energy using Products Directive (EuP) 20
6. Energy Perormance o Building Directive (EPBD) 26
7. Ballast Directive 30
8. Energy Services Directive (ESD) 32
9. Energy Eiciency Label (EEL) 36
10. Lighting Quality Norms indoor (EN 12464-1) 38
11. Lighting Quality Norms outdoor (EN 13201) 40
12. Eco-label 42
Philips Lighting 5
Index of legislation
-
7/31/2019 Environment Booklet
6/44
6 Philips Lighting January 2009
It is clear that the next ew years are important or environmental
legislation* related to lighting. Some legislation already in orce will beupdated (e.g. WEEE, RoHS, EPBD, Energy Eiciency Label), some will
be evaluated to decide i they should be continued or not (Eco-label)
and newly published Directives (e.g. EuP and ESD) will be implemented
in the EU27 market, thus phasing out energy ineicient products and
orcing the EU27 market to switch to energy eicient lighting products.
1. The first five minutes
-
7/31/2019 Environment Booklet
7/44
7Philips LightingJanuary 2009
Philips and the European Lighting Industry (ELC, CELMA) support
all these legislations, because it will increase the application o valueadded lighting solutions. Special ocus should be paid to energy
eiciency, hazardous substances and lietime reliability. Environmental
legislation related to lighting already suraced more than a decade ago
but during the last years the amount o legislation related to lighting
has been increased mainly in the area o energy eiciency.
About 2/3 o all lighting currently installed in the world is based on
old technology, or which energy eicient alternatives are available
now. Environmental legislation oers unique opportunities to discuss
renovation o lighting with your customers.
When lighting renovation rates are increased, particular or the buildingsector and public lighting, both substantial energy savings as well as green
sales growth will result. The Accelerated Renovation Approach** aims to
achieve this by making our customers an oer they cant reuse; lighting
solutions that save energy and oer better quality o light at the same time.
A large part o our communication or the coming years will be ocused
on encouraging businesses to make the switch now to energy saving
lighting: it helps the business (by saving money and having good quality
light) while contributing to a better environment at the same time.
-
7/31/2019 Environment Booklet
8/44
8 Philips Lighting January 2009
As Philips we bring a powerul and consistent message to the
market, across dierent channels and market segments. Thats whywe have developed a recognizable vehicle that will come back in
our communication linked to Green / energy saving. The vehicle is
a green soa. The idea behind this soa is that i you take a seat, you
make a statement to switch to energy saving lighting. People become
ambassadors that call to action: together we can make that change!
Understanding the environmental legislation and making the right
decisions will have an impact on your business. It is better to take
action now than to wait when the legislation will be enorced
because all the laws lead to better lighting.
Complying to environmental legislation means seeking or businessopportunities. Oering your customer the cheapest product means
satisying his initial needs, but tends to be a solution, which in the
longer term results into the most expensive solution.
Thereore we recommend buying Philips Green products,
and go or the Triple Win:
1. Users/tax payers save costs and obtain better light quality
2.The environment beneits rom lower energy/CO2 emissions
3. Business / country competitiveness is strengthened.
-
7/31/2019 Environment Booklet
9/44
9Philips LightingJanuary 2009
* More details on the EU27 legislation can be found in the Philips Lighting
Academy (PLA) module on environmental legislation.
** More details on the Accelerated Renovation Approach are available on the
Green Switch Intranet site: www.lighting.philips.com/greenswitch or ask your
local Philips Lighting contact person (for installers/external partners).
-
7/31/2019 Environment Booklet
10/44
10 Philips Lighting January 2009
2. Suggestions on how to use environmental
arguments in sales discussions
In the last years environment (climate change) and energy eiciency(scarcity, compatibility) are high on the political agenda. This resulted in
a number o existing and orthcoming legislations on energy eiciency in
general but also on lighting in speciic. This legislation can be used as an
additional argument to convince customers to switch to energy eicient
and sustainable lighting solutions next to TCO and lighting requirements.
O course the irst sales argument will be that customers should always
be in line with the lighting norms or indoor (EN-12464-1) and outdoor
(EN-13201) which are also included in this booklet.
-
7/31/2019 Environment Booklet
11/44
11Philips LightingJanuary 2009
The process
First check if your customer is aware of environmental legislationand i they have an ISO14001 certiicate or a sustainability program
If yes, ask what they do to be in compliance with legislation, their
ISO-14001 improvement plan or sustainability objectives, and what
the consequences are or their lighting systems.
If no, explain them that compliance to legislation helps them to
improve the lighting and what they can do to become compliant
(you can use this booklet but also the PLA module on EU27
environmental legislation).
Offer them a scan to evaluate the compliance and show them a
number o products that are the best solution and outperorm existing
legislation and competition. These are the so-called Green Products. Next to being in line with legislation, these products are the most
economical solution and provide optimal quality light which make them
the best sustainable solution with respect to planet (environment),
people (quality light) and proit (TCO)
-
7/31/2019 Environment Booklet
12/44
12 Philips Lighting January 2009
Oer
Environmental scan (to check conformity existingproducts with legislation)
Declaration of conformity to environmental legislation
Carbon footprints (especially interesting for governmental
customers and commercial organizations with a
sustainability program)
ISO14001 improvement and sustainability programs
can include next to compliance with legislation
Carbon neutrality
Green procurement
Environmental labeling(building codes, eco label)
Social responsibility
(well being or employees)
-
7/31/2019 Environment Booklet
13/44
13Philips LightingJanuary 2009
Be aware that compliance to legislation is seen as the absoluteminimum. This means compliance to minimum requirement
standards as expressed in or example the EuP and the RoHS.
All Philips products are in line with these requirements but our
Green Products are best in class and outperorm competition.
However there are also legislations such as the EPBD that
challenge building owners to become best in class.
-
7/31/2019 Environment Booklet
14/44
14 Philips Lighting January 2009
3. RoHS Directive - 2002/95/EC
Restriction o the use o certain Hazardous Substances
in electrical and electronic equipment
Status - Implemented 1 July 2006 Revision 2009
new RoHS expected 2010
Aim o legislation
This legislation complements the WEEE Directive by cutting
the amounts o potentially hazardous materials contained in
electronic and electrical products.
Reduces risks to recycling staff.
Lowers liability and prevents end users from coming into
contact with hazardous substances.
Minimizes the need for special waste treatment and
recycling equipment.
Minimizes pollution due to less use of substances.
Helps to cut overall WEEE costs.
-
7/31/2019 Environment Booklet
15/44
15Philips LightingJanuary 2009
Key RoHS points:
The use in lighting products o the ollowing substances
has been restricted:
Lead (Pb)
Mercury (Hg)
Hexavalent Chromium (Cr VI)
Cadmium (Cd)
Polybrominated Biphenyls (PBB)
Polybrominated Diphenyl Ethers (PBDE)
-
7/31/2019 Environment Booklet
16/44
16 Philips Lighting January 2009
Substance Application Exemption Max Value
Mercury CFL
Straight uorescent lamps (general purposes)
Halophosphate (standard lamps)
Triphosphate normal life (80 colours)
Triphosphate long life (Xtra/Xtreme)
Fluorescent lamps for special purposes
(Compact) HID lamps
< 5 mg
< 10 mg
< 5 mg
< 8 mg
Exempted
Exempted
Lead Glass in starters and uorescent tubes
High melting temperature solders (Pb>85%)
Electronic ceramic parts (e.g. in drivers)
Exempted
Exempted
Exempted
What does it mean or Lamps, Gear and Luminaires?
The RoHS directive covers lamps, gear and luminaires and together
with the WEEE directive will have a signiicant impact on reducing the
quantities o hazardous substances coming into the environment.
Be aware that in the RoHS legislation, in contrast to the WEEE
legislation, ilament lamps are also included.
There are some lighting exemptions in the legislation or both mercury
and lead based on current industry levels o these substances (see table
below). This is due to the act that some mercury is needed to allowgas discharge lamps to operate eiciently and a lack in some cases o
industrial technical alternatives in lead or certain product categories.
One key consequence o the RoHS legislation should be the restriction
o poor quality products. Philips, with its commitment to apply Ecodesign
in its innovations, will exceed these new standards.
Lighting exemptions in the RoHS directive:
-
7/31/2019 Environment Booklet
17/44
17Philips LightingJanuary 2009
Related sales arguments
All Philips Lighting products are compliant. Conformity declarations
are available on request.
Our MASTER fluorescent lamps contain industry leading low levels
o mercury. You will recognize these by the ollowing logos*on
the packaging. These products it perectly or companies with an
environmental and sustainability policy, as well as or companies that
are ISO14001 certiied.
The absolute content of hazardous substances is not always the most
important value. For example the mercury content over lifetime can bea more important driver to select longer lietime reliable products such
as MASTER TL-D Xtra and Xtreme.
Note: Mercury is still needed to create energy efficient lighting using discharge
technology (such as fluorescent lamps). There are several reasons why Philips has
very low values of mercury such as a reliable manufacturing processes resulting inthe low mercury consumption during life.
*
-
7/31/2019 Environment Booklet
18/44
18 Philips Lighting January 2009
4. WEEE Directive - 2002/96/EC
Waste Electrical and Electronic Equipment
Status - Implemented
WEEE should have oicially been implemented on 13-08-2005, and now
it is implemented in all EU 27 countries + 2 (Norway and Switzerland).
Aim o legislation
The purpose o the directive is to prevent waste or to reduce it by
re-using or re-cycling. The basic premise o the directive is that the
producer is responsible or the inancing o environmentally sound
disposal o his products at the end-o-lie stage. The environmental
background is the rapid increase o WEEE waste, the hazardous
component content and the insufficient recycling effort at the moment.
Key points WEEE
Manufacturers and importers of electronic and electrical equipment
are responsible or compensating the collection, recovery and
treatment o WEEE costs.
Consumers can return their products free of charge to the
collection points.
Only licensed operators will be able to handle and recover WEEE.
-
7/31/2019 Environment Booklet
19/44
19Philips LightingJanuary 2009
What does it mean or lighting?
The WEEE covers all Gas discharge lamps. Control Gear is seen as an
integral part o the luminaire. The products that are covered under theWEEE can be recognized by a crossed-out wheeled dustbin label*.
In all EU27+2 countries, ELC lamp manuacturers work together to
set up collective recycling and service organizations. For lamps, Philips
puts a visible lat ee on the invoice to inance the disposal structure.
For gear and luminaires each country has a specific solution. These
service organizations take over the producer responsibility. Philips is a
member and in some countries chairman o this service organization.
Related sales arguments
The WEEE fee is a significant part of the lamp purchase price especially
or low quality lamps with a short lietime such as a halophosphateluorescent lamp. There is no ee dierentiation between dierent type
o lamps under the scope o the directive. The longer the lietime the
lower the impact o the WEEE ee but also the amount o waste.
Philips has a full range of long-life time reliable products such as the
MASTER TL-D Xtra/Xtreme and MASTER PL-L Xtra
LEDs have the longest lifetime of all existing lighting products and they
are also not covered by WEEE. Thus are LEDs the best choice with
respect to the lowest waste impact regarding costs and material.
*
-
7/31/2019 Environment Booklet
20/44
20 Philips Lighting January 2009
5. EuP Directive - 2005/32/EC
Framework directive or the setting o Ecodesign
requirements or Energy using Products
Status - Published
The EUP Directive was published on 22 July 2005. Member states have
transposed (i.e. adopted) it into national law.
In 2008, two speciic underlying Implementing Measures (IM) on lighting
have been voted positively by the Regulatory Committee (RC): the IM
on Tertiary Sector Lighting and the IM on Domestic Lighting (phase 1).
For both IMs entry into force is expected in Q1 2009.
During 2009 the IM on Domestic Lighting (phase 2) will be designed
and voting in the RC is expected in Q4 2009.
Aim o legislation
The EUP Directive is aiming at reducing the environmental impact o
energy using products without obstacles to intra-EU trade.
The Implementing Measures set the energy eiciency criteria o new
products and are immediately valid in all Member states as rom their
publication in the European Gazette, and no transposition is needed.
-
7/31/2019 Environment Booklet
21/44
21Philips LightingJanuary 2009
Lamps Ballasts Luminaires
Phase out T8
halophosphate
uorescent lamps
Minimum Energy Efciency
Index (EEI) class B2 ballasts
or uorescent lamps
included in table 17.
18 months (second hal
2010): mandatory product
inormation or uorescent
and High Intensity Discharge
lamps (>2000 lumen)
available on websites and
technical documents
Phase out o uorescent
lamps (T8 & T5) with
colour rendering
index < 80
Minimum EEI class A3
ballasts or uorescent
lamps not included in
table 17 (new lamps)
Mandatory inormation
or uorescent and High
Intensity Discharge (HID)lamps available on websites
and technical documents
Mandatory EEI marking on
all uorescent ballasts
Standby power maximum
1W or uorescent lamp
ballasts
Standby power maximum
1W or luminaires or
uorescent lamps
Phase out CFL-ni 2-pin
lamps (these lamps can
only be operated on
magnetic ballasts)
Stage 1: 1 year ater entry into orce (2010)
What will it mean or lighting?
The ocus in the IMs is to set minimum energy eiciency requirements,
thus automatically phasing out products that cannot ulill these
requirements. Next to the energy eiciency requirements also moredetailed product inormation has to become available.
See below table with the consequences for the IM Tertiary Sector Lighting.
-
7/31/2019 Environment Booklet
22/44
22 Philips Lighting January 2009
Lamps Ballasts Luminaires
Phase out T10 and T12
halophosphate uorescent
lamps
Introduction o minimum
efciency requirements or
High Intensity Discharge
(HID) ballasts. No change
to uorescent lamp ballasts
requirements.
Luminaires or uorescent
lamps without integrated
ballast and or high intensity
discharge lamps shall be
compatible with ballasts
complying with the 3rd
stage requirements,except
luminaires with ingress
protection grade at least
IP4X (complete enclosed
luminaires)
Phase out High Pressure
Sodium (HPS) lamps belowlimit level (excluding HPS
plug-in to operate on
HPM ballasts)
Efciency marking on all
HID ballasts
Phase out Metal Halide
lamps (E27, E40 and
PGZ12) below limit level
Mandatory product inor-
mation or all luminaires
available on websites and
technical documents
6 years ater entry into
orce (2015): phase out
other HID lamps below
limit level, a.o. High
Pressure Mercury (HPM)
lamps and phase out plug-in
High Pressure Sodium
(HPS) lamps to operate
on HPM ballasts
Standby power maximum
0.5W or uorescent
lamp ballasts
Standby power maximum
0.5 W or luminaires or
uorescent lamps
Stage 2: 3 years ater entry into orce (2012)
-
7/31/2019 Environment Booklet
23/44
23Philips LightingJanuary 2009
Lamps Ballasts Luminaires
Phase out some
additional Metal
Halide lamps 405W
(E27, E40 and PGZ12)
through higher
minimum efcacy
requirements +
improved lie &
lumen maintenance
Phase out B1, B2, A3
ballasts or uorescent lamp ballasts
All luminaires to
be compatible only
with 3rd stage
requirements ballasts
Values or HID ballasts:
Nominal lamp
wattage (P)
Minimum
ballast efciency
(ballast)
W %
P
-
7/31/2019 Environment Booklet
24/44
24 Philips Lighting January 2009
Summary Domestic Lighting, phase 1, Consequences stages 1- 6
Directional light sources (relector lamps) and special purpose
lamps are exempted
ABC Allowed in the EU27 market
DEFG not allowed in the EU27 market
Minimum
Efciency *
rom Stage 1
09/2009
Stage 2
09/2010
Stage 3
09/2011
>=80W
>950lm
Clear ABC/DEFG
Frosted A/BCDEFG
>=65W
>725lm
Clear ABCDE/FG ABC/DEFG
Frosted A/BCDEFG>=45W
>450lm
Clear ABCDE/FG ABC/DEFG
Frosted A/BCDEFG
>=7W
>60lm
Clear ABCDE/FG
Frosted A/BCDEFG
Minimum
Efciency *
rom Stage 4
09/2012
Stage 5
09/2013
Stage 6
09/2016
>=80W
>950lm
Clear AB C
Frosted A
>=65W
>725lm
Clear AB C
Frosted A
>=45W
>450lm
Clear AB C
Frosted A
>=7W>60lm
Clear ABC/DEFG AB C
Frosted A
* Valid for all incandescent lamps and halogens with E27, E14,
B22 and B15 cap and
-
7/31/2019 Environment Booklet
25/44
25Philips LightingJanuary 2009
Related sales arguments
The EuP will phase out a number of energy inefficient products
within the near uture. It makes no sense to sell new lighting systems
including this such as HPL based luminaires that will need to be
renovated on very short notice and thus imposing additional costs.
Thereore it is recommended to ocus on selling lighting systems
consisting o products in line with the uture EuP requirements.
Products that will be phase out are: halophosphate TL lamps, low
eicient metal halides lamps, low eicient High Pressure Sodium
lamps, CFL-ni 2-pin lamps, EM gear for fluorescense, High PressureMercury lamps, incandescent lamps, low eicient halogen lamps
(see also tables above).
Products that will are in line with the EUP Directive are electronic
gear and controls, as well as lamps like CosmoPolis as alternative
or HPL, MASTER TL-D Eco and MASTER TL5 as alternative or
halophosphate TL lamps, and CFL-I, MASTER classic and MASTER
LED as alternative or incandescent lamps and low eicient halogen
lamps. These products also make business sense thanks to their
energy cost savings (TCO), optimal lighting quality, lietime reliability
and minimized use o hazardous substances.
-
7/31/2019 Environment Booklet
26/44
-
7/31/2019 Environment Booklet
27/44
27Philips LightingJanuary 2009
Key Building directive points:
The directive concerns residential and tertiary sector (oices, public
buildings, etc.). The minimum useul loor area has to be more than
1000 m2. Renovated buildings have to comply as well i the renovation
content is higher than 25% o the total value o the building.
It does not concern historical buildings and industrial sites.
It does not lay down criteria on equipment such as household
appliances, nor on qualiications o installations.
It offers a common methodology for calculating the integrated energy
perormance o buildings and systems or energy certiications that
are less than ive years old.
The methodology should include all aspects of energy consumption
such as heating, cooling, lighting position and orientation o the
building, heat recovery, etc.
Minimum total building criteria will be set by national legislation.
This means that individual solutions have to be summated and
be averaged over the total. The energy use o energy eicient
installations can compensate or less energy eicient installations
in the same building.
Since for lighting the application performance requirements
(EN 12464) are not made mandatory by the Building Directive,
it is still possible to install under perorming systems.
Some countries have specific national regulations enforcing light
technical perormance standards or speciic applications.
The envisaged update of the Building Directive may further
strengthen the requirements and broaden its scope.
-
7/31/2019 Environment Booklet
28/44
28 Philips Lighting January 2009
What does it mean or lighting?
Lighting has to compete with other energy consuming products in
buildings and their potential or reducing energy use. It is important toexplain the beneits o energy eicient lighting both in energy reduction
and as cost savings. This means that HF gear, controls, and systems such
as TL5 all become more attractive.
Related sales arguments
The EPBD is not implemented and enorced in most o the member
states so not many end users are aware how to comply and how
to balance the opportunities or lighting with respect to the other
elements in this legislation. Explain them the beneits o energy
eicient lighting and how it can contribute to achieve a high
classiication level in a cost eective way. The first step to comply to the EPBD is to perform an energy
scan to deine the energy classiication and a lighting scan including
a LENI calculation.
To decrease the LENI and to contribute to the highest EPBD class
advice Green Products such as MASTER TL5 lamps, Controls and
Electronic ballasts.
Certification and energy efficient lighting will increase the value
o the building.
High quality lighting will be stimulated by addressing compliance
to Light technical perormance standard EN 12464.
-
7/31/2019 Environment Booklet
29/44
-
7/31/2019 Environment Booklet
30/44
30 Philips Lighting January 2009
7. Ballast Directive 2000/55/EC
Energy Eiciency requirements or ballasts or luorescent
lighting
Status Implemented will become part o EuP and repealed
as separate directive
Phase 1: ban on EEI D-class ballasts per 21-5-2002
Phase 2: ban on EEI C-class ballasts per 11-2005
Phase 3: all the contents will be included in EUP Implementing
Measures Tertiary Sector Lighting as per stage 2 (February 2010)
and repealed (i.e. deleted) as separate Directive
Aim o legislation
Promote energy savings through moving away rom less energy eicientballasts by limiting the ballast losses.
Key points:
Ballasts are classified through an Energy Efficiency Index (EEI) A1, A2,
A3, B1, B2, C and D, where A1 is the most energy eicient due to
dimming acility and D the least energy eicient.
Compliance to the Ballast Directive is, like the Low Voltage Directive
and the EMC Directive, shown by the application o the CE marking.
This means that luminaires imported rom outside Europe must
comply with the directive as well.
-
7/31/2019 Environment Booklet
31/44
31Philips LightingJanuary 2009
The Ballast Directive is only for fluorescent lamps (TL, CFL-NI).
Ballasts with high losses are phased out in two steps (D-class by
21-5-2003and C-class by 11-2005).
What does it mean or lighting?
As 50% o sales are C-class ballasts, this directive is a huge opportunity
to switch to electronic ballast (A-class) and related control systems.
It should also help restrict low quality cheap imports rom outside the
EU. Electromagnetic ballasts (B-class) are also allowed, but this category
is more expensive and larger than C and D-class.
Sales arguments
Only B and A-type ballast are allowed. Advise to change the luminaire
as it is not economical viable to change the ballast due to high labour
costs. Additional beneits are better optimal perormance and thepossibility to integrate day light linking and presence detection to
save even more energy.
In case of upgrading, selecting an A1-class electronic ballasts is the
best choice due to better energy eiciency and maximized energy
savings through dimming and the use o controls (up to 30% saving by
switching rom EM to Electronic and up to 75% by using controls).
Additional benefits of electronic ballasts are longer lamp life, no
licker and no end-o-lie eects.
-
7/31/2019 Environment Booklet
32/44
32 Philips Lighting January 2009
8. ESD Directive - 2006/32/EC
Directive on the promotion o end use eiciency and
energy services
Status - Published 2006 Implemented 2008
It has been implemented as national legislation in 2008.
Aim o legislation
Energy consumption in the EU is 20% higher than can be justiied
economically. The ESD requires Member States to make 3 National
Energy Eiciency Action Plans (NEEAP) (in 2007, 2011, 2014) to save
9% o energy in 9 years. In additional there is a Political Agreement
(March 2007) to go even beyond this legislation and save 20% energy
by 2020. The ESD also requires Energy Suppliers to implement energyeiciency measures.
This legislation emphasizes the need to apply all other existing
environmental legislation, as well as the new EUP directive. Where
the EUP Directive ocuses on the demand side (new products), the
ESD applies to distribution and retail sale o energy such as electricity
and other types o energy carriers, the public procurement and the
role o governments, auditing o installations and unding mechanisms
or renovations.
-
7/31/2019 Environment Booklet
33/44
33Philips LightingJanuary 2009
Key points Energy Service & Eiciency directive:
Eliminate barriers that prevent efficient end use of energy by targetsetting, set up o incentives, inancial and legal rameworks.
Develop a market for energy services and providing energy-saving
programs and other measures to improve end-use energy eiciency.
A general savings target of 1% per year (for a 9-year period) supplied
or sold to end-users (based on previous ive year average).
A mandatory target of 1.5% in the public sector through
procurement, energy programs and other measures.
Targets should be met by
Financial instruments, like third party contracts and energy
perormance contracts Purchase of equipment with good energy efficiency and
low-energy products
Energy distributors that sell electricity should
Supply and promote energy services
Refrain activity that could hamper energy efficiency
Supply information to improve energy efficiency
Member states must also take care that inancial instruments are put
into place including certiication, monitoring and auditing systems.
-
7/31/2019 Environment Booklet
34/44
34 Philips Lighting January 2009
What will it mean or lighting?
Due to lobby eorts, lighting (renovation) projects are mentioned in
nearly all National Energy Eiciency Action Plans.It is also o interest to electricity suppliers, because it is one o the
cheapest and astest ways to realize energy savings related to the
obligations above mentioned.
Related sales arguments
The UK Energy Efficiency Commitment is one of the systems that fit
in the ESD, where large amounts of CFL lamps are sold to electricity
suppliers (so-called PES business). The ESD and the UK best practice
will be a unique opportunity to roll out this approach all over Europe
to promote energy eicient lighting as a vehicle or the public sector
to achieve their targets. It is a unique opportunity to sell energy efficient lighting solutions
to utilities not only in the domestic domain but also at proessional
end users.
Partnerships with Energy Service Companies (ESCOs) can be a
good way to help energy companies to comply to the ESD with
the help o lighting.
You can also offer to use the energy scan that the energy companies
can use to make their customers aware o their saving potential.
-
7/31/2019 Environment Booklet
35/44
-
7/31/2019 Environment Booklet
36/44
36 Philips Lighting January 2009
9. Energy Efficiency Label - 98/11/EC
Status - Implemented Revision 2009
Update o the council Directive 92/75/EC with regard to energyeiciency labeling o household lamps.
Aim o legislation
Stimulate the market to buy more energy eicient products by making
categories in energy eiciency classes and make them available in a
label on the packaging.
Key points:
Ratings for lighting are defined as energy efficiency class A
(most energy eicient) to G (least energy eicient).
Classes are calculated using lumen output and lamp power input(see annex IV o the directive).
The label must be put on the packaging and communicated in mail
order catalogues and other printed material. This should contain the
ollowing inormation:
Energy efficiency class
Luminous flux of the lamp
Input power
Average rated lamp life
See for label dimensions Annex 1 of the directive
-
7/31/2019 Environment Booklet
37/44
37Philips LightingJanuary 2009
What does it mean or lighting?
Product scope: Filament and integral compact fluorescent lamps and allluorescent lamps. The scope will be enlarged with all products in EUP
Excluded are:
Lamps with luminous flux > 6500 lumens
Lamps with input power < 4W
Reflector lamps
Lamps operated on batteries
Light outside visible range (400 to 800 nm)
Lamps integrated in luminaire not for illumination
Related sales arguments Compliance to the EEL is applying the right marking not the choice
in the EEL class.
Use category A and B, as the most energy eicient range o products,
not only good or the environment but. in line with the orthcoming
EuP phase out o incandescent lamps and also the lowest running costs.
-
7/31/2019 Environment Booklet
38/44
38 Philips Lighting January 2009
10. Light Technical Performance Standard -
EN 12464-1: for indoor applications.
Status published in 2003 to accommodate to the Workplace
Directive on the protection o labour
This standard is not called up by European legislation. No obligatory
application is necessary. Some countries reer to this standard in their
regulations or some speciic applications.
Aim o the standard
Provide a minimum level o lighting so that people can perorm the
task as expected without excessive negative visual and health eects.
Key points:
The standard specifies minimum requirements for indoor
workplaces (sport accommodations excepted).
Ra>80 is required in ull time work areas.
T>4000 K in areas of medical attention and T>6000 where
colour inspection is needed (dentist, laboratories, pharmacies)
>200 lux at task area where people are present and >20 luxwhere people only occasionally present. Recommended values
are between 300 - 500 lux.
-
7/31/2019 Environment Booklet
39/44
39Philips LightingJanuary 2009
What does it mean or lighting?
The standard aects colour rendering, colour temperature, light
levels glare and licker. It meets the needs or visual comort, saety
and perormance.
Related sales arguments Compliance to the norm means that lighting is meeting the minimum
values or good lighting with respect to colour rendering, amount o
light on the task, glare and uniormity.
All the green products comply to the norm, there are solutions
or 1-to-1 replacement and we can oer lighting plans.
Energy eicient solutions
For each customer segment an energy efficient lighting solution exists
already today (see also PLA module Lighting Solutions)
-
7/31/2019 Environment Booklet
40/44
40 Philips Lighting January 2009
11. Light Technical Performance Standard -
EN 13201: for outdoor applications.
Status published in 2004
This standard is not called up by European legislation. No obligatory
application is necessary. Some countries on a voluntary base adopted
it putting its standards as mandatory to be ollowed or some speciic
applications.
Aim o the standard
Provide guidelines or lighting designers o road lighting installations by
describing visibility requirements or the sae use o roads.
This standard also aims to reduce or prevent obtrusive light in places
where it isnt needed (glare; light pollution, etc).
Key points:
To achieve the minimum required lighting for save traffic, both
socially and unctional.
The norm comes with lighting situations and converts these into
perormance requirements.
For road lighting the luminance (cd/m2), the overall and lengthwise
uniormity, the threshold increment (indication o the loss o visual
perormance due to perceived glare rom the lighting element) and
the surround ratio are relevant.
Especially in cities the vertical illuminance at buildings should not be
too high to prevent complaints rom inhabitants. Limits are set.
-
7/31/2019 Environment Booklet
41/44
41Philips LightingJanuary 2009
What does it mean or lighting?
The Lighting Industry wants to obtain an obligatory status ater
updating the standard to integrate energy eiciency criteria or road
lighting installations.
Related sales arguments
Compliance to the norm means that lighting is meeting the minimum
values or good lighting with respect the amount o light related to
the road classiication, glare and uniormity.
All the green products comply to the norm, there are solutions for
1-to-1 replacement and we can oer lighting plans.
Energy eicient solutions
For each customer segment an energy efficient lighting solution exists
already today (see also PLA module Lighting Solutions)
-
7/31/2019 Environment Booklet
42/44
42 Philips Lighting January 2009
12. Eco-label 002/747/EC
(revision of 1999/568/EC)
Revised ecological criteria or the award o the Community
Eco-label to light bulbs
Status - Implemented in 1999 and revised in 2002
Voluntary Scheme o products meeting ecological criteria.
Philips is not using this label.
LR IMG
-
7/31/2019 Environment Booklet
43/44
-
7/31/2019 Environment Booklet
44/44
2009 Koninklijke Philips Electronics N.V.
All rights reserved. Reproduction in whole or in part is prohibited without
the prior written consent o the copyright owner. The inormation presented
in this document does not orm part o any quotation or contract, is
believed to be accurate and reliable and may be changed without notice.
No liability will be accepted by the publisher or any consequence o its use.
Publication thereo does not convey nor imply any license under patent- or