Page 1 of 14

Ezio Santagata

Personal profile:

Born in Torino (Italy), November 9th, 1968.

Currently resident in Torino (Italy).

Father of two sons: Edoardo (age 24, Renewable Energy Engineer), Lorenzo (age 22, Game Designer).

Italian and English mother tongue.

Current position:

Full professor of “Roads, Railways and Airports” - Politecnico di Torino

Leader of the “Pavement Engineering” research group (current composition, January 2021: 2 Full

professors, 2 Associate professors, 2 Assistant professors, 4 PhD candidates).

Academic web-page:

https://www.diati.polito.it/en/personale/scheda/(nominativo)/ezio.santagata

Academic career:

Assistant professor since 1994

Associate professor since 1998

Full professor since 2001

Higher formation:

Visiting Scholar at the Penn State University (USA) in 1993 and 1995.

Areas of expertise:

Design and construction of pavements for transportation infrastructures;

Characterization of paving materials (with an emphasis on rheology and performance-related testing);

Innovative paving materials and technologies;

Pavement design, modelling and evaluation.

Academic roles:

2003-2012: President of the Civil Engineering program;

2003-2012: Vice-Director of the “Department of Hydraulics, Transport and Civil Infrastructures” (DITIC);

2007-current: Director of the “Road Materials Laboratory” (LMS);

2007-current: Scientific Responsible of the High Quality Laboratory denominated “Experimental Laboratory

of Innovative and recycled Materials for Civil Engineering Infrastructures” (LAQ-MIR);

1999-current: Member of the Scientific Council of CIRS (Italian InterUniversity Road and Airport Research

Center).

Editorial roles:

since May 2004: member of the Editorial Board of the International Journal of Pavement Engineering &

Asphalt Technology, published open-access by De Grutier Open;

since January 2007: member of the Editorial Board of Road Materials and Pavement Design, published by

Taylor & Francis, U.K.;

Page 2 of 14

since June 2009: member of the Editorial Board of the International Journal of Roads and Airports,

published on-line and open-access by the Experimental Interuniversity Road and Airport Research Centre

(CIRS);

since June 2010: member of the Editorial Board of the International Journal of Pavement Engineering,

published by Taylor & Francis, U.K.;

since April 2014: member of the Editorial Advisory Panel of Construction Materials, published by ICE

(Institution of Civil Engineers) Publishing, U.K.

Teaching activity:

120 hours per academic year currently distributed in the following MS courses:

“Construction of roads, railways and airports” – mandatory for all Civil Engineering students (course

entirely taught in English);

“Pavement and track engineering” – mandatory for all Civil Engineering students who select the

“Infrastructures and Transportation Systems” curriculum (course entirely taught in English).

Supervision of MS theses and PhD dissertations:

1996-current: Supervisor of over 300 MS Theses in Civil Engineering and 20 PhD dissertations, focused on

pavement modeling and/or pavement materials testing.

Consulting:

Consulting activities have been carried out in Italy and abroad, mainly by addressing problems related to

pavement evaluation, design, rehabilitation and management. The list of major clients and activities

includes:

2017-current: ANAS International Enterprise S.p.A. and Ashghal (Public Works Authority of the State of

Qatar). Technical Director /Leading Pavement Expert of the “QA/QC Pavement Consultancy Services”

Project;

1998-current: SITAF S.p.A. and MUSINET S.p.A. – A32 motorway Torino-Bardonecchia. Support to all

engineering activities related to pavement design and evaluation;

1998-2004: ADR Engineering S.p.A. – Rome “Leonardo da Vinci” International Airport. Analysis of the

effects caused by the use of expanded clay in the construction of the runway pavement;

1999: Italstrade S.p.A. – Vore-Durres highway (Albania). Analysis of the structural performance of the

flexible pavement;

2001: SEA S.p.A. – Milano-Linate “Forlanini” airport. Analysis of the possible strategies for the

strengthening of subgrade soils of the runway pavement;

2005-2010: SPEA Ingegneria Europea S.p.A. and TIBRE s.c.a.r.l. – Italian motorway network. Mechanistic

design of pavements;

2009-2012: Todini Costruzioni Generali S.p.A. – Autoroute Est-Ouest, lot Bouira-El Adjba (Algeria) and

Levan-Tepelene Road Project, Albania). Mechanistic design and forensic analyses for innovative pavements;

2011: PAVITAL Engineering S.p.A. – Pakistani road network. Structural evaluation of pavements containing

catalyzed mixtures;

2010-current: SINA S.p.A. – Major Italian motorways. Evaluation of construction works and pavement

performance modeling;

2012-2013: PROTOTIPO S.p.A. – Nardò Technical Centre (now Porsche). Pavement assessment and

rehabilitation.

Page 3 of 14

Research contracts (2000-current):

(only those as Scientific Responsible and Principal Investigator)

Grants attributed as a result of peer review and/or technical committee evaluation:

Period Title Funding body Budget (€) 2001-03 Performance-based analysis of granular materials

containing recycled components (PRIN project) Ministry of Instruction, University and Research

205.550

2003-05 Definition of mix-design/QA criteria and procedures for bituminous materials employed in urban innovative pavements (PRIN project)

Ministry of Instruction, University and Research

100.200

2007-09 Full-scale laboratory simulative testing of perpetual pavements (PRIN project)

Ministry of Instruction, University and Research

52.430

2007-11 AWIS – Airport weather information system for the prediction, monitoring and management of meteorological winter emergencies in airports

Piedmont Region 165.710

2010-13 RICCO - Reuse of ashes derived from biomass combustion

Ministry for Agricultural development

97.000

2011-13 Cold-recycled bituminous base layers with enhanced structural performance

Ministry of Instruction, University and Research

59.850

2011-14 TYREC4LIFE – Development and implementation of innovative and sustainable technologies for the use of scrap tyre rubber in road pavements (LIFE+ project)

European Community 150.700

TOTAL 831.440

Funding from public Administrations and private Companies:

(*: projects developed within CIRS - Italian InterUniversity Road and Airport Research Center)

Period Title Administration/Company Budget (€) 2000-01 Study of the compaction properties of bituminous

mixtures containing virgin aggregates, expanded clay and RAP

ADR Engineering S.p.A. 30.990

2000-01 Experimental investigation on the cold-recycled materials employed on the A4 Torino-Milano motorway

Sineco S.p.A. 15.490

2001-02 Analysis and control of cold-recycled bituminous mixtures

Sineco S.p.A. 30.990

2001-02 Activation of the experimental laboratory of the Province of Torino for the evaluation of paving materials

Province of Turin 102.260

2002 Bituminous materials for high-performance viscoelastic plug joints

Prismo S.p.A. 18.070

2002 Experimental investigation on the cold-recycled materials employed on the A4 Torino-Milano motorway

Sineco S.p.A. 20.660

2002 Experimental investigation on the bituminous mixture to be employed on the runway of the Cagliari-Elmas airport (*)

SOGAER S.p.A. 25.000

2002 Experimental investigation on the bituminous mixture to be employed on the runway of the “Forlanini” airport in Milano-Linate (*)

LI.MA. S.c.a.r.l 10.000

2002-03 Theoretical study and response modeling of sub-pavement joints employed on the Savona-Ventimiglia motorway

Autostrada dei Fiori S.p.A. 20.000

2002-03 Backfilling and sealing of mini-trenches for urban Alpitel S.p.A. 15.500

Page 4 of 14

utilities

2002-03 Strengthening of flexible pavments by means of cold recycling rehabilitation (*)

Province of Como 40.000

2002-04 Experimental study on the use of expanded clay for the enhancement of skid resistance of wearing course mixtures

Laterlite S.p.A. 31.000

2003 Dynamic behavior of bituminous mixtures for railway sub-ballast layers (*)

CAV.TO.MI. S.p.A. 57.500

2003 Non-destructive evaluation of bituminous mixtures for railway sub-ballast layers (*)

CAV.TO.MI. S.p.A. 23.000

2006 Design of a full-scale accelerated loading pavement facility

Pavimental S.p.A. 30.000

2006-07 Evaluation of the possibility of employing recycled plastics in bituminous mixtures for road pavements

Envipark S.p.A. 40.000

2006-07 Evaluation of the effects of lime on the performance properties of cold-recycled bituminous mixtures

Pavimental S.p.A. 65.000

2007 Forensic investigation on the pavement of the Asti-Cuneo motorway (Section 2 Isola d’Asti – Motta)

ANAS S.p.A. Compartimento Viabilità Piemonte

128.000

2007 Mix design of cement-stabilized foundation layers containing RAP

Impregest s.r.l. 15.000

2007-08 Development of innovative wearing courses with enhanced anti-icing performance

Proteinn 5.000

2008 Full-scale testing of asphalt plug joints Impregest s.r.l. 31.550

2008-09 Strategies for the use of RAP in motoway pavements SPEA Ingegneria Europea S.p.A.

130.000

2008-09 Preliminary evaluation of the bearing capacity of the runway strip in the “Sandro Pertini” airport

SAGAT S.p.A. 72.000

2009 Investigation on the performance of bituminous mixtures with high rutting resistance (Lybia project)

Iterchimica s.r.l. 40.000

2009-10 Characterization of subgrade soils for the Bibiana – Luserna San Giovanni connection

Province of Turin 9.860

2009-10 Evaluation of the possible use of crumb rubber from end-of-life tires in road pavements

Province of Turin 121.500

2010 Preliminary evaluation of the resistance to permanent deformation of special wearing course mixtures (Algeria project)

Todini Costruzioni Generali S.p.A.

8.500

2010 Mix design of cold-recycled bituminous mixtures for the construction of base courses in motorway pavements

SPEA Ingegneria Europea S.p.A.

32.000

2011 Preliminary monitoring of a pilot section with gap-graded wearing course containing crumb rubber

Ecopneus s.c.p.a. 36.000

2011 Performance-related characterization of cold-recycled bituminous mixtures

SPEA Ingegneria Europea S.p.A.

40.000

2011 Preliminary evaluation of technologies for the use of products derived from ELTs in road pavements

Ecopneus s.c.p.a. 45.000

2011 Advanced characterization of high-performance bituminous mixtures for motorway pavements

Sitalfa S.p.A. 70.000

2011 Analysis of the mechanical and strength properties of bituminous mixtures employed for the construction of the Fier-Tepelene road (Albania)

Todini Costruzioni Generali S.p.A.

28.000

2011 Quality Assurance of paving materials employed on the A32 Torino-Bardonecchia motorway

SITAF S.p.A. 133.000

2011-12 Leutner shear testing of CIDEX interfaces 6D Solutions 11.500

2012 Certification of crumb rubber produced by means of the “High Pressure Water Jet” technology

Greentech Innovation S.p.A. 7.500

2012-16 Science and technology of bituminous binders and mixtures containing crumb rubber from ELTs

Ecopneus s.c.p.a. 835.000

Page 5 of 14

2013 Preliminary evaluation of the possible use of sawing fillers in bituminous mixtures for road pavements

Camera di Commercio VCO 39.900

2014 Laboratory and field investigations for the mix design of high-performance bituminous mixtures containing crumb rubber from end of life tires (ELTs)

ATIVA Engineering S.p.A. 48.500

2014 Evaluation of the pavement of the "Variante di Borgaretto alla S.P. n. 143"

Metropolitan City of Turin 19.000

2015 Performance-based mix design of bituminous mixtures for NTC test tracks

IMP s.r.l. 58.000

2015 Preliminary evaluation of bituminous mixtures employed in maintenance operations on the provincial network

Metropolitan City of Turin 19.000

Reuse of paint sludge in road pavements (RP2)

2015 Evaluation of the compaction properties of granular materials employed in backfilling of cuts for pressure pipings

Eaux Valdotaines s.r.l. 8.400

2015-16 Experimental investigation on soils of the airport strips - Napoli-Capodichino International Airport

GE.S.A.C. S.p.A. 7424,28

2016 In situ investigation and laboratory tests supporting maintenance works on the runway strip of the Napoli-Capodichino International Airport

GE.S.A.C. S.p.A. 60084,77

2016-17 Maintenance and repair of pavements in mixed-use tramway tracks

GTT - Gruppo Trasporti Torinese S.p.A.

19.300

TOTAL 2.414.770

Page 6 of 14

Publications:

[1] E. Santagata (1993). “Cracking control in open-graded bituminous mixture by means of fibers – Experimental investigation and microstructural theoretical modelling”, Le Strade, n. 1290, January 1993, pp. 63-75 (in Italian).

[2] E. Santagata & A. Montepara (1993). “Mechanical characterization of open-graded bituminous mixtures containing fibers”, Le Strade, n. 1292, March-April 1993, pp. 433-442 (in Italian).

[3] E. Santagata & A. Montepara (1993). “An NMR-based method for the chemical characterization and rheological selection of modified bitumens”, Proceedings, 5th Eurobitume Congress, Stockholm, Sweden, 16-18 June, 1993, Vol. 1A, pp. 143-147.

[4] E. Santagata & A. Montepara (1993). “A laboratory experience regarding the use of reinforcing fibres in open graded bituminous mixtures”, Proceedings, XIII Annual Transportation Convention, Pretoria, South Africa, 28 June - 1 July, 1993.

[5] E. Santagata, F. Canestrari & F.A. Santagata (1993). "Laboratory shear testing of tack coat emulsions", Proceedings, 1st World Congress on Emulsion, Vol. 3, Paris, France, 19-22 October, 1993, pp. 4.40.118.1-6.

[6] F. Canestrari & E. Santagata (1994). "Experimental analysis and theoretical models for the study of shear behaviour of interfaces in bituminous multilayer systems", Le Strade, n. 1299, January 1994, pp. 79-88 (in Italian, SIIV Prize for Scientific Research 1993).

[7] F. Canestrari & E. Santagata (1994). "Tensile and shear tests of interfaces in asphalt mixes: a new perspective on their failure criteria", Proceedings, 2nd International Symposium on Highway Surfacing, Belfast, Northern Ireland, 27-28 January, 1994.

[8] E. Santagata (1994). “An alternative approach to the determination of the AC content in asphalt mixes: the combustion method”, Proceedings, 2nd International Symposium on Highway Surfacing, Belfast, Northern Ireland, 27-28 January, 1994.

[9] E. Santagata (1995). “Experimental investigation on rheology and fracture behaviour of modified bitumens employed in surface layers of road pavements”, SIIV Studies and Researches, supplement to Le Strade, n. 1314, October 1995, pp. 66-73 (in Italian).

[10] M. Claxton, E. Santagata, J. Lesage & F. Migliori (1995). “Bending beam rheometer: comparison of inter-laboratory results for a variety of binders”, Revue Générale des Routes et Aérodromes, n. 735, December 1995, pp. 91-94.

[11] M. Claxton, E. Santagata & D.A. Anderson (1996). “The use of bending beam rheometer and direct tension tester data for the prediction of the low-temperature properties of bituminous mixtures”, Proceedings, Eurasphalt & Eurobitume Congress, Strasbourg, France, 7-10 May, 1996.

[12] E. Santagata, D.A. Anderson & M. Marasteanu (1996). “A rheological investigation on the physical hardening of modified asphalt binders”, Proceedings, Eurasphalt & Eurobitume Congress, Strasbourg, France, 7-10 May, 1996.

[13] E. Santagata, M. Bassani & C. De Palma (1996). “A rational framework for the mix design of bituminous mixtures”, Proceedings, Eurasphalt & Eurobitume Congress, Strasbourg, France, 7-10 May, 1996.

[14] Montepara, E. Santagata & G. Tosi (1996). “Photochemical degradation of pure bitumen by U.V. radiation”, Proceedings, Eurasphalt & Eurobitume Congress, Strasbourg, France, 7-10 May, 1996.

[15] F. Canestrari, E. Santagata & F.A. Santagata (1996). "Laboratory performance-based design of surface dressings", Proceedings, Eurasphalt & Eurobitume Congress, Strasbourg, France, 7-10 May, 1996.

[16] F. Canestrari, F. Giuliani & E. Santagata (1996). "Influence of filler on the rheological behaviour of mastics. Comparative analysis by means of the bending beam rheometer", Proceedings, National SIIV Congress, “Materials in Road Pavements”, Ancona, Italy, 14-16 October 1996 (in Italian, SIIV Prize for Scientific Research 1996).

[17] M. Bassani, E. Santagata, C. De Palma (1996). “Proprietà meccaniche di miscele bituminose progettate con il metodo dei vuoti”, Atti, Convegno SIIV, “I Materiali nella Sovrastruttura Stradale”, Ancona, 14-16 ottobre 1996.

[18] F. Canestrari & E. Santagata (1996). “Caratteristiche prestazionali dei trattamenti superficiali”, Atti, Convegno SIIV, “I Materiali nella Sovrastruttura Stradale”, Ancona, 14-16 ottobre 1996.

[19] E. Santagata (1996). “Misure reometriche sui bitumi stradali. Indagine sperimentale sull’uso dei reometri rotazionali”, Atti, Convegno SIIV, “I Materiali nella Sovrastruttura Stradale”, Ancona, 14-16 ottobre 1996.

[20] E. Santagata (1996). “Il mix design strutturale dei conglomerati bituminosi”, Atti, Convegno SIIV, “I Materiali nella Sovrastruttura Stradale”, Ancona, 14-16 ottobre 1996.

Page 7 of 14

[21] E. Santagata (1997). “A performance-related approach to the mix design and quality control of bituminous mixes”, Proceedings, 5th International RILEM Symposium, “Mechanical Tests for Bituminous Materials - Recent Improvements and Future Prospects”, Lyon, France, 14-16 May, 1997.

[22] C. De Palma, E. Santagata & M. Bassani (1997). “Indagine sperimentale sull’impiego della pressa a taglio giratoria”, Atti, Convegno SIIV “La Sicurezza Stradale”, Pisa, 29-30 ottobre 1997.

[23] F. Canestrari & E. Santagata (1997). “Studio della ripetibilità della prova prestazionale ASTRA sui trattamenti superficiali di irruvidimento”, Atti, Convegno SIIV “La Sicurezza Stradale”, Pisa, 29-30 ottobre 1997.

[24] C. De Palma, E. Santagata & M. Bassani (1997). “Studio delle proprietà fisiche e meccaniche dei materiali bituminosi per una efficace interazione tra pavimentazione e veicolo”, Atti, 3° Convegno Nazionale CNR Progetto Finalizzato Trasporti “Sottoprogetto 3 Sessione VIII - Pavimentazioni Stradali”, Taormina, 10-12 novembre 1997.

[25] E. Santagata & R. Tedesco (1997). “L’Impiego delle fibre poliacrlonitriliche nei conglomerati bituminosi”, Atti, Convegno Tecnitex, “Mostra Convegno del Tessile Tecnico”, Torino, 21 novembre 1997.

[26] E. Santagata (1998). “An alternative solution for the Bolzano runway”, Le Strade, n. 1335, March 1998, pp. 72-78 (in Italian).

[27] E. Santagata, F. Canestrari & F. Giuliani (1998). "Experimental investigation on the rheology of bituminous mastics”, Proceedings, XXIII National PIARC Congress, Verona, Italy, 18-21 May, 1998, vol. I, pp. I/205-I/216 (in Italian).

[28] E. Santagata & B. Celauro (1998). “Miscele bituminose”, Quaderno AIPCR “Manutenzione e rafforzamento delle pavimentazioni: innovazioni, sperimentazioni e tendenze” a cura del Comitato AIPCR Italiano C8 “Pavimentazioni Flessibili”, presentato al XXIII Convegno Nazionale Stradale, Verona, 18-21 maggio 1998

[29] E. Santagata (1998). “Proprietà fisiche degli aggregati lapidei e loro influenza sulle prestazioni delle miscele bituminose”, Rassegna del Bitume, n. 31/98, Anno XXIV – II Semestre 1998, pp. 31-39.

[30] C. De Palma, E. Santagata & M. Bassani (1998). “Decadimento strutturale dei materiali a matrice bituminosa”, Atti, Convegno SIIV “Adeguamento Funzionale e Manutenzione delle Infrastrutture Viarie”, Milano, 19-20 ottobre 1998.

[31] E. Santagata (1999). “Caratteristiche meccaniche dei riciclati a freddo”, Le Strade, n. 1345, marzo 1999, pp. 70-72.

[32] E. Santagata & M. Bassani (1999). “Improved use of the repeated load indirect tensile test”, Proceedings, 3rd European Symposium on “Performance and Durability of Bituminous Materials and Hydraulic Stabilised Composites”, Leeds, United Kingdom, 8-9 April 1999, pp. 493-515. Award for the best paper.

[33] E. Santagata, M. Bassani & C. De Palma (2000). “Developments in the rational mix design of bituminous mixtures: the effects of aggregates as modelled by the voids method”, Proceedings, 2nd Eurasphalt & Eurobitume Congress, Barcelona, Spain, 20-22 September, 2000.

[34] E. Santagata (2001). “Performance-related characterization of polymer-modified binders and mixtures”, Proceedings, International Sealoflex Conference, Rome, Italy, 9 May, 2001.

[35] E. Santagata & G. Chiappinelli (2001). “Influence of emulsion type on the volumetric and mechanical properties of cold-recycled bituminous mixtures”, Proceedings, XI National SIIV Congress, Verona, Italy, 28-30 November, 2001 (in Italian).

[36] M. Bassani, A. Bevilacqua & E. Santagata (2001). “Non-linear analysis of the structural behaviour of flexible pavements”, Proceedings, XI National SIIV Congress, Verona, Italy, 28-30 November, 2001 (in Italian).

[37] M. Bassani & E. Santagata (2001). “Experimental investigation on the introduction of the gyratory shear compactor in technical specifications”, Proceedings, XI National SIIV Congress, Verona, Italy, 28-30 November, 2001 (in Italian).

[38] M. Bassani, E. Santagata & C. De Palma (2001). “The voids method: an innovative approach to volumetric mix design of bituminous mixtures”, Proceedings, XI National SIIV Congress, Verona, Italy, 28-30 November, 2001 (in Italian).

[39] F. Canestrari, E. Santagata & F. A. Santagata (2001). “Standard test for the evaluation of shear properties of bituminous interfaces”, Proceedings, XI National SIIV Congress, Verona, Italy, 28-30 November, 2001 (in Italian).

[40] E. Santagata, G. Chiappinelli, M. Garozzo & M. Mori (2001). “Experience of the ASTM group in pavement cold-recycling. Experimental investigations in acceptance testing, quality assurance and field evaluation”, Pre Prints, INFRAVIA Congress, Verona, Italy, 30 November, 2001, vol. 3 (in Italian).

Page 8 of 14

[41] E. Santagata & M. Bassani (2002). “Evaluation of bitumen-aggregate interactions by means of volumetric expansion tests”, Proceedings, 4th BITMAT, European Symposium on Performance of Bituminous and Hydraulic Materials in Pavement, Nottingham, United Kingdom, 11-12 April, 2002, vol. 1 pp. 269-278.

[42] E. Santagata & O. Baglieri (2002). “Effect of binder rheology on permanent deformation of bituminous mixtures”, Proceedings, XXIV National PIARC Road Congress, Saint Vincent, Italy, 26-29 June, 2002, pp. 66-75 (in Italian).

[43] E. Santagata & M. Bassani (2002). “Use of refuse derived plastics in substitution of sand fractions in bituminous mixtures”, Proceedings, XXIV National PIARC Road Congress, Saint Vincent, Italy, 26-29 June, 2002, pp. 76-89 (in Italian).

[44] C. De Palma, E. Santagata & C. Graffi (2002). “Theoretical modeling and analysis of the field behaviour of buried motorway joints”, Proceedings, XXIV National PIARC Road Congress, Saint Vincent, Italy, 26-29 June, 2002, pp. 90-102 (in Italian).

[45] E. Santagata & G. Chiappinelli (2002). “Research in the area of cold recycling”, Le Strade, n. 1379, July-August 2002, pp. 54-56 (in Italian).

[46] E. Santagata & M. Bassani (2002). “A model for the prediction of the elastic stiffness of bituminous mixtures under pulse loading”, International Journal of Pavement Engineering & Asphalt Technology, vol. 3, issue 1, October 2002, pp. 42-58.

[47] E. Santagata & S.D. Barbati (2002). “Development of test procedures for the measurement of the acoustic absorption coefficient of bituminous mixtures”, Proceedings, XII International SIIV Congress, Parma, Italy, 30-31 October, 2002, vol. 2, pp. 507-528 (in Italian).

[48] M. Bassani & E. Santagata (2002). “Test sections for the evaluation of volumetric and mechanical properties of bituminous mixtures”, Proceedings, XII International SIIV Congress, Parma, Italy, 30-31 October, 2002, vol. 2, pp. 21-43 (in Italian).

[49] F. Canestrari, F. Giuliani & E. Santagata (2002). “Influence of aggregate geometry and shape on the volumetric properties of dense and open-graded bituminous mixtures”, Proceedings, XII International SIIV Congress, Parma, Italy, 30-31 October, 2002, vol. 2, pp. 529-553 (in Italian).

[50] E. Santagata & G. Chiappinelli (2002). “Comparative evaluation of modified emulsions for cold-recycling of bituminous mixtures”, Proceedings, XII International SIIV Congress, Parma, Italy, 30-31 October, 2002, vol. 2, pp. 390-408 (in Italian).

[51] E. Santagata & C. Graffi (2002). “Analysis of energy dissipation and damage accumulation for the evaluation of fatigue behaviour of Gussasphalt”, Proceedings, XII International SIIV Congress, Parma, Italy, 30-31 October, 2002, vol. 2, pp. 409-427 (in Italian).

[52] E. Santagata & E. Toraldo (2002). “Test methods for the evaluation of failure behaviour of bituminous mixtures”, Proceedings, XII International SIIV Congress, Parma, Italy, 30-31 October, 2002, vol. 2, pp. 409-427 (in Italian).

[53] F. Canestrari, E. Santagata & F. A. Santagata: “Performance-related evaluation of slurry surfacings by means of the ASTRA test method”, Proceedings, 3rd International Conference “Bituminous Mixtures and Pavements”, Thessaloniki, Greece, 21-22 November, 2002, vol. 1, pp. 489-498.

[54] E. Santagata & M. Bassani (2002). “Full-scale investigation on the volumetric relationship between laboratory and in-situ compaction”, Proceedings, 3rd International Conference “Bituminous Mixtures and Pavements”, Thessaloniki, Greece, 21-22 November, 2002, vol. 1, pp. 237-248.

[55] E. Santagata & G. Chiappinelli (2002). “The effect of fibres on the rheological and failure properties of bituminous mastics and mixtures”, Proceedings, 3rd International Conference “Bituminous Mixtures and Pavements”, Thessaloniki, Greece, 21-22 November, 2002, vol. 1, pp. 535-546.

[56] E. Santagata & C. Graffi (2002). “Valle d’Aosta Region”, in La Criticità del Sistema Viario Nazionale, Franco Angeli, 2002, pp. 39-52 (in Italian).

[57] M.C. Santagata & E. Santagata (2003). “Experimental investigation of factors affecting the injectability of microcement grouts”, Proceedings, 3rd International Conference on Grouting & Ground Treatment, New Orleans, Louisiana, U.S.A., 10-12 February, 2003.

[58] M. Bassani & E. Santagata (2003). “Experimental analysis on the use of refuse derived plastics in roadway subgrade soils”, Proceedings (CD-ROM), IV VARIREI Congress and International Exposition, “Added Value and Recycling of Industrial Waste”, L’Aquila, Italy, 24-27 June, 2003 (in Italian).

Page 9 of 14

[59] E. Santagata & G. Chiappinelli (2003). “Experimental investigations on a cold-recycling plant”, Proceedings (CD-ROM), IV VARIREI Congress and International Exposition, “Added Value and Recycling of Industrial Waste”, L’Aquila, Italy, 24-27 June, 2003 (in Italian).

[60] E. Santagata & G. Chiappinelli (2003). “Experimental evaluation of cold-recycled bituminous mixtures used for major rehabilitation works”, Proceedings, MAIREPAV3, 3rd International Symposium on Maintenance and Rehabilitation of Pavements and Technological Control, Guimarães, Portugal, 7-10 July, 2003.

[61] E. Santagata. “State of the art and development trends of international research on road pavements”, Strade & Autostrade, n. 42, vol. VII, November/December 2003, pp. 10-17 (in Italian).

[62] E. Santagata & O. Baglieri (2004). "Tests in the continuous regime for the characterization of road binders”, Strade & Autostrade, n. 44, vol. VIII, March/April 2004, pp. 92-93 (in Italian).

[63] E. Santagata & M. Bassani (2004). “Modelling of flexible airport pavements subjected to thermal cracking”, Proceedings, 5th RILEM International Conference on Cracking in Pavements, Limoges, France, 5-8 May, 2004.

[64] E. Santagata & M. Bassani (2004). “Assessing the effects of refuse derived plastics used as additives in bituminous mixtures”, Proceedings (CD-ROM), 3rd Eurasphalt & Eurobitume Congress, Wien, Austria, 12-14 May, 2004.

[65] E. Santagata & G. Chiappinelli (2004). “Improvements in the mix design of cold-recycled bituminous mixtures”, Proceedings (CD-ROM), 3rd Eurasphalt & Eurobitume Congress, Wien, Austria, 12-14 May, 2004.

[66] E. Santagata & E. Toraldo (2004). “Laboratory characterization of bituminous materials used for asphaltic plug joints”, International Journal of Pavements, vol. 3, n. 3, September 2004, pp. 51-58.

[67] F. Canestrari F. Cardone, E. Santagata, F. A. Santagata & A. Virgili (2004). “Low temperature characterization of road bitumen with the direct tension device”, Strade & Autostrade, vol. VIII, n. 48, November/December 2004, pp. 86-94 (in Italian).

[68] F. Canestrari, G. Ferrotti, M. Partl & E. Santagata (2005). “Advanced testing and characterization of interlayer shear resistance”, Transportation Research Record: Journal of the Transportation Research Board, vol. 1929:1, pp. 69-78, https://doi.org/10.1177/0361198105192900109

[69] F. Canestrari & E. Santagata (2005). “Temperature effects on the shear behaviour of tack coat emulsions used in flexible pavements”, The International Journal of Pavement Engineering, vol. 6:1, pp. 39-46, https://doi.org/10.1080/10298430500068720

[70] E. Santagata & O. Baglieri (2005). "Experimental evaluation of modified bituminous binders for heavy duty applications”, Proceedings, 3rd International SIIV Congress, “People, Land, Environment and Transport Infrastructures. Reliability and Development”, Bari, Italy, 22-24 September, 2005.

[71] E. Santagata & E. Toraldo (2005). “A new approach to the mix design of bituminous mixtures for trench sealing”, Proceedings, 3rd International SIIV Congress, “People, Land, Environment and Transport Infrastructures. Reliability and Development”, Bari, Italy, 22-24 September, 2005.

[72] E. Santagata, S.D. Barbati & A. Graziani (2006). “GPR investigations for the optimization of runway maintenance”, Proceedings (CD-ROM), Second International Airports Conference: Planning, Infrastructure & Environment, São Paulo, Brazil, 2-4 August, 2006.

[73] M. Bocci, F. Cardone, G. Cerni & E. Santagata (2006). “Rheological characterization of the fatigue resistance of asphalt binders”, Proceedings, 10th International Conference on Asphalt Pavements, Québec City, Canada, 12-17 August, 2006, vol. I, pp. 506-516.

[74] E. Santagata, M. Velardocchia, E. Galvagno, D. Lioi & A. Sorniotti (2006). “Multi-body dynamic modeling of the expected performance of accelerated pavement testing facilities”, Proceedings (CD-ROM), International Conference on Perpetual Pavement, Columbus, Ohio, U.S.A., 13-15 September, 2006.

[75] E. Santagata & O. Baglieri (2006). “Rheological and chemical investigations for the quantitative assessment of physical hardening of bituminous binders”, Proceedings, XVI National SIIV Congress, Cosenza, Italy, 20-22 September, 2006, vol. 1, pp. 511-527 (in Italian).

[76] M. Bassani & E. Santagata (2006). “Experimental investigation on the relationship between design speed, operative speed and speed limits in extraurban infrastructures”, Proceedings, XVI National SIIV Congress, Cosenza, Italy, 20-22 September, 2006, vol. 2, pp. 437-456 (in Italian).

[77] E. Santagata & G. Chiappinelli (2006). “Short-term field assessment of cold-recycled bituminous mixtures”, Proceedings, Congres Mondial de l’Emulsion 2006, Lyon, France, 3-6 October, 2006.

Page 10 of 14

[78] E. Santagata & S.D. Barbati (2007). "Use of the ground penetrating radar (GPR) for the distress evaluation of flexible pavements”, Proceedings, 4th International Conference “Bituminous Mixtures and Pavements”, Thessaloniki, Greece, 19-20 April, 2007, vol. 2, pp. 809-818.

[79] E. Santagata & P.P. Riviera (2007). “Laboratory mix design and performance assessment of bituminous mixtures containing recycled plastics”, Proceedings (CD-ROM), VARIREI 2007, VI International Congress, “Valorisation and recycling of industrial waste”, L’Aquila, Italy, 27-29 June, 2007.

[80] E. Santagata, G. Chiappinelli & P.P. Riviera (2007). "Experimental investigation for the analysis of cold-recycled bituminous mixtures”, Proceedings, MAIREPAV5, 5th International Conference on Maintenance and Rehabilitation of Pavements and Technological Control, Park City, Utah, U.S.A., 8-10 August, 2007, pp. 463-468.

[81] E. Santagata & S.D. Barbati (2007). "Acoustic absorption potential of porous wearing course mixtures”, Proceedings, MAIREPAV5, 5th International Conference on Maintenance and Rehabilitation of Pavements and Technological Control, Park City, Utah, U.S.A., 8-10 August, 2007, pp. 403-408.

[82] E. Santagata, M. Bassani, L. Mussone & O. Baglieri (2007). “Experimental investigation of the relationship between accidents, geometrical characteristics and operative conditions in urban infrastructures”, Strade & Autostrade, n. 5/2007, September-October 2007, pp. 34-39 (in Italian).

[83] E. Santagata, O. Baglieri & D. Dalmazzo (2008). "Experimental investigation on the fatigue damage behaviour of modified bituminous binders and mastics”, Journal of the Association of Asphalt Paving Technologists, vol. 77, pp. 851-884.

[84] D. Novarino, E. Santagata, D. Dalmazzo & M. Zanetti (2008). “Rheological testing of wastewater sludges”, Proceedings, International Symposium on Sanitary and Environmental Engineering, Florence, Italy, 24-27 June, 2008 (in Italian).

[85] M.C. Santagata, D. Dalmazzo & E. Santagata (2008). “Deformation behavior of clay-water suspensions”, Proceedings, Fourth International Symposium on Deformation Characteristics of Geomaterials, Atlanta, Georgia, U.S.A., 22-24 September, 2008.

[86] E. Santagata (2008). “Research and innovation in pavement engineering”, in What Future for the Infrastructure? Innovation and Sustainable Development, Patron, Bologna, Italy, pp. 163-177.

[87] E. Santagata, O. Baglieri, D. Dalmazzo & L. Tsantilis (2009). "Rheological and chemical investigation on the damage and healing properties of bituminous binders”, Journal of the Association of Asphalt Paving Technologists, vol. 78, pp. 567-596.

[88] M. Bassani, E. Santagata, O. Baglieri, M. Ferraris, M. Salvo & A. Ventrella (2009). “Use of vitrified bottom ashes of municipal solid waste incinerators in bituminous mixtures in substitution of natural sands”, Advances in Applied Ceramics, vol. 108:1, pp. 33-43, https://doi.org/10.1179/174367608x364285

[89] F. Cardone, A. Graziani, S.D. Barbati & E. Santagata (2009). “Evaluation of runway bearing capacity: in-situ measurements and laboratory tests”, Proceedings, Eighth International Conference on the Bearing Capacity of Roads, Railways and Airfields, Champaign, Illinois, U.S.A., 29 June – 2 July, 2009, https://doi.org/10.1201/9780203865286.ch155

[90] E. Santagata, M. Bassani, D. Lioi & G. Cossale (2009). “Multi-scale testing of bituminous systems for additive evaluation”, Proceedings, MAIREPAV6, 6th International Conference on Maintenance and Rehabilitation of Pavements and Technological Control, Torino, Italy, 8-10 July, 2009, pp. 175-184.

[91] E. Santagata, D. Dalmazzo, L. Tsantilis & O. Baglieri (2009). “The enhancement of performance-related properties of bituminous binders by means of fibers”, Proceedings, MAIREPAV6, 6th International Conference on Maintenance and Rehabilitation of Pavements and Technological Control, Torino, Italy, 8-10 July, 2009, pp. 64-73.

[92] E. Santagata, E.G. Sogno & S. Uras (2009). “Simulative testing for the assessment of damage caused by anti-icing chemicals on bituminous surface mixtures for airport pavements”, Proceedings, MAIREPAV6, 6th International Conference on Maintenance and Rehabilitation of Pavements and Technological Control, Torino, Italy, 8-10 July, 2009, pp. 333-342.

[93] D. Novarino, M.C. Zanetti, E. Santagata & D. Dalmazzo (2010). “Rheological characterisation of sludge coming from a wastewater treatment plant”, American Journal of Environmental Sciences, vol. 6:4, 2010, pp. 329-337, https://doi.org/10.3844/ajessp.2010.329.337

[94] E. Santagata, M. Bassani & E. Sacchi (2010). “Performance of new materials for aircraft arrestor beds”, Transportation Research Record: Journal of the Transportation Research Board, vol. 2177:1, 2010, pp. 124-131, https://doi.org/10.3141/2177-15

Page 11 of 14

[95] E. Santagata, G. Chiappinelli, P.P. Riviera & O. Baglieri (2010). “Triaxial testing for the short term evaluation of cold-recycled bituminous mixtures”, Road Materials and Pavement Design, vol. 11:1, pp. 123-147, https://doi.org/10.3166/rmpd.11.123-147

[96] E. Santagata, P.P. Riviera & D. Dalmazzo (2011). “Rutting behaviour of wearing course mixtures in severe temperature and loading conditions”, Proceedings, 5th International Conference “Bituminous Mixtures and Pavements”, Thessaloniki, Greece, 1-3 June, 2011, pp. 541-550.

[97] S. Comba, D. Dalmazzo, E. Santagata & R. Sethi (2011). “Rheological characterization of NZVI suspensions for injection in porous media”, Journal of Hazardous Materials, vol. 185:2-3, pp. 598-605, https://doi.org/10.1016/j.jhazmat.2010.09.060

[98] B. Ruffino, D. Dalmazzo, E. Santagata & M.C. Zanetti (2011). “Preliminary evaluation of the potential use of paint sludge in bituminous binders”, Proceedings, Thirteenth International Waste Management and Landfill Symposium, Santa Margherita di Pula, Italy, 3-7 October, 2011.

[99] M.C. Zanetti, S. Fiore, B. Ruffino & E. Santagata (2011). “End of life tyres: crumb rubber physical and chemical characterization for reuse in paving applications”, Proceedings, Thirteenth International Waste Management and Landfill Symposium, Santa Margherita di Pula, Italy, 3-7 October, 2011.

[100] R. Melotti, E. Santagata, M. Bassani, M. Salvo & S. Rizzo (2011). “Characterization of ash from biomass combustion for its use as filler in asphalt mixtures”, Proceedings, Thirteenth International Waste Management and Landfill Symposium, Santa Margherita di Pula, Italy, 3-7 October, 2011.

[101] E. Santagata & M.C. Zanetti (2012). The use of products from end-of-life tyres in road pavements. ECOPNEUS scpa, Milan, Italy (in Italian).

[102] E. Santagata, O. Baglieri, D. Dalmazzo & L. Tsantilis (2012). “Damage and healing test protocols for the evaluation of bituminous binders”, Proceedings, 5th Eurasphalt & Eurobitume Congress, Istanbul, Turkey, 13-15 June, 2012.

[103] D. Novarino, T. Tosco, R. Sethi, E. Santagata & M.C. Zanetti (2012). “Rheological characterization of hydrogen release compounds for aquifer remediation”, Proceedings, SIDISA 2012 “Sustainable Technology for Environmental Protection”, Milan, Italy, 26-29 June, 2012.

[104] E. Santagata, O. Baglieri, L. Tsantilis & D. Dalmazzo (2012). “Rheological characterization of bituminous binders modified with carbon nanotubes”, Procedia: Social & Behavioral Sciences, vol. 53, pp. 546-555, https://doi.org/10.1016/j.sbspro.2012.09.905

[105] E. Santagata, P.P. Riviera & D. Dalmazzo (2012). “Performance-related characterization of bituminous binders and mixtures containing natural asphalt”, Procedia: Social & Behavioral Sciences, vol. 53, pp. 535-545, https://doi.org/10.1016/j.sbspro.2012.09.904

[106] E. Santagata, P.P. Riviera, D. Dalmazzo, M. Lanotte, M.C. Zanetti, S. Fiore & B. Ruffino (2012). “Design and construction of a full-scale test section with asphalt rubber gap-graded wearing course mixture”, Procedia: Social & Behavioral Sciences, vol. 53, pp. 524-534, https://doi.org/10.1016/j.sbspro.2012.09.903

[107] B. Ruffino, D. Dalmazzo, P.P. Riviera, E. Santagata & M.C. Zanetti (2012). “Preliminary performance assessment of asphalt concrete with paint sludge from automotive industries”, Proceedings, 3rd International Conference on Industrial and Hazardous Waste Management, Crete, Greece, 12-14 September, 2012.

[108] E. Santagata, D. Dalmazzo, M. Lanotte, M.C. Zanetti & B. Ruffino (2012). “Relationship between crumb rubber morphology and asphalt rubber viscosity”, Proceedings, AR2012, 5th Asphalt Rubber "Roads of the Future" International Conference, Munich, Germany, 23-26 October, 2012. pp. 513-532.

[109] R. Melotti, E. Santagata, M. Bassani, O. Baglieri, M. Ferraris, M. Salvo & S. Rizzo (2012). “Re-use of ashes from the combustion of municipal solid waste and biomass in bituminous mixtures”, Proceedings, Fourth International Symposium on Energy from Biomass and Waste, Venice, Italy, 12-15 November, 2012.

[110] E. Santagata, M.C. Zanetti, G. Corbetta & D. Fornai (2013). “POLIPNEUS Project. Science and technology of bituminous binders and mixtures containing crumb rubber from end-of-life tyres”, Strade & Autostrade, vol. 97/XVII, n. 1, January/February 2013, pp. 62-68 (in Italian).

[111] E. Santagata & O. Baglieri (2013). “Evaluation of PCN for airport pavements”, Strade & Autostrade, vol. 98/XVII, n. 2, 2013, pp. 52-56 (in Italian).

[112] E. Santagata, O. Baglieri, L. Tsantilis & D. Dalmazzo (2013). “Evaluation of self healing properties of bituminous binders taking into account steric hardening effects”, Construction and Building Materials, vol. 41, pp. 60-67, https://doi.org/10.1016/j.conbuildmat.2012.11.118

Page 12 of 14

[113] E. Santagata, M. Lanotte, D. Dalmazzo & M.C. Zanetti (2013). “Potential performance-related properties of rubberized bituminous mixtures produced with dry technology”, Proceedings, 12th International Conference on Sustainable Construction Materials, Pavement Engineering and Infrastructure, Liverpool, UK, 27-28 February, 2013.

[114] E. Santagata, O. Baglieri, D. Dalmazzo & L. Tsantilis (2013). “Evaluation of the anti-rutting potential of polymer-modified binders by means of creep-recovery shear tests”, Materials and Structures, vol. 46:10, pp. 1673-1682, https://doi.org/10.1617/s11527-012-0006-0

[115] R. Melotti, E. Santagata, M. Bassani, M. Salvo & S. Rizzo (2013). “A preliminary investigation into the physical and chemical properties of biomass ashes used as aggregate fillers for bituminous mixtures”, Waste Management, vol. 33:9, pp. 1906-1917, https://doi.org/10.1016/j.wasman.2013.05.015

[116] E. Santagata, O. Baglieri, L. Tsantilis & G. Chiappinelli (2013). “Effects of nano-sized additives on the high-temperature properties of bituminous binders: a comparative study”, Proceedings, International RILEM Symposium on Multi-Scale Modeling and Characterization of Infrastructure Materials, Stockholm, Sweden, 10-12 June, 2013, Multi-Scale Modeling and Characterization of Infrastructure Materials, RILEM Bookseries, vol. 8, Springer, Dordrecht, pp. 297-309, https://doi.org/10.1007/978-94-007-6878-9_22

[117] E. Santagata, O. Baglieri & P.P. Riviera (2013). “Effect of anti-icing chemicals on stripping of asphalt concrete mixtures for airport runway wearing courses”, Proceedings, 2013 Airfield and Highway Pavement Conference: Sustainable and Efficient Pavements, Los Angeles, California, USA, 9-12 June, 2013, https://doi.org/10.1061/9780784413005.104

[118] M.C. Zanetti, S. Fiore, B. Ruffino & E. Santagata (2013). “Use of crumb rubber in road paving applications: workers’ health risk assessment”, Proceedings, Fourteenth International Waste Management and Landfill Symposium, Santa Margherita di Pula, Italy, 30 September - 4 October, 2013.

[119] E. Santagata, G.A. Blengini, A. Farina, M.C. Zanetti & G. Chiappinelli (2013). “Life cycle assessment of road pavement base and foundation courses containing reclaimed asphalt pavement (RAP)”, Proceedings, Fourteenth International Waste Management and Landfill Symposium, Santa Margherita di Pula, Italy, 30 September - 4 October, 2013.

[120] E. Santagata, O. Baglieri, L. Tsantilis & A. Vercelli (2014). “Development of test protocols for the analysis of magneto-rheological properties of field-responsive bituminous binders”, American Journal of Applied Sciences, vol. 11:3, pp. 505-519, https://doi.org/10.3844/ajassp.2014.505.519

[121] E. Santagata, M. Bassani & O. Baglieri (2014). “Use of vitrified municipal solid waste bottom ash as a filler substitute in asphalt mixtures”, Proceedings, 3rd International Conference on Transportation Infrastructures - ICTI 2014, Pisa, Italy, 22-25 April, 2014, Sustainability, Eco-efficiency, and Conservation in Transportation Infrastructure Asset Management, CRC Press, pp. 15-21, https://doi.org/10.1201/b16730-5

[122] E. Santagata & S. Sciamanna (2014). “Development of a new response-type road roughness measuring system”, Proceedings, 3rd International Conference on Transportation Infrastructures - ICTI 2014, Pisa, Italy, 22-25 April, 2014, Sustainability, Eco-efficiency, and Conservation in Transportation Infrastructure Asset Management, CRC Press, pp. 711-718, https://doi.org/10.1201/b16730-104

[123] M.C. Zanetti, S. Fiore, B. Ruffino, E. Santagata, M. Lanotte & D. Dalmazzo (2014). “Development of a laboratory test procedure for the evaluation of potential gaseous emissions of asphalt rubber bituminous mixtures”, Proceedings, 3rd International Conference on Transportation Infrastructures - ICTI 2014, Pisa, Italy, 22-25 April, 2014, Sustainability, Eco-efficiency, and Conservation in Transportation Infrastructure Asset Management, CRC Press, pp. 119-128, https://doi.org/10.1201/b16730-19

[124] M.C. Zanetti, S. Fiore, B. Ruffino, E. Santagata & M. Lanotte (2014). “Assessment of gaseous emissions produced on site by bituminous mixtures containing crumb rubber”, Construction and Building Materials, vol. 67, pp. 291-296, https://doi.org/10.1016/j.conbuildmat.2014.03.030

[125] A. Farina, M.C. Zanetti, E. Santagata, G.A. Blengini & M.A. Lanotte (2014). “Life cycle assessment of road pavements containing crumb rubber from end-of-life tires”, Proceedings, International Symposium on Pavement LCA 2014, Davis, California, USA, 14-16 October, 2014.

[126] A. Farina, G.A. Blengini, M.C. Zanetti, E. Santagata, M. Lanotte & A. Fortunato (2014). “Life cycle assessment of road pavements containing crumb rubber from end-of-life tires” (“Life cycle assessment (LCA) di pavimentazioni stradali contenenti polverino di gomma da pneumatici fuori uso (PFU)”), Proceedings, Ecomondo 2014, Session: “Tools for the sustainability evaluation of products/processes: Environmental and Social LCA, Life Cycle Costing, Environmental Footprint, Carbon & Water Footprint, Emergy, MFA” (“Strumenti per la valutazione della sostenibilità di prodotti/processi: Environmental and Social LCA, Life Cycle Costing,

Page 13 of 14

Environmental Footprint, Carbon & Water Footprint, Emergy, MFA"), Rimini, Italy, 5-8 November, 2014 (in Italian).

[127] E. Santagata, O. Baglieri, M. Alam & D. Dalmazzo (2015). “A novel procedure for the evaluation of anti-rutting potential of asphalt binders”, International Journal of Pavement Engineering, vol. 16:4, pp. 287-296, https://doi.org/10.1080/10298436.2014.942859

[128] E. Santagata, O. Baglieri, L. Tsantilis & G. Chiappinelli (2015). “Fatigue properties of bituminous binders reinforced with carbon nanotubes”, International Journal of Pavement Engineering, vol. 16:1, pp. 80-90, https://doi.org/10.1080/10298436.2014.923099

[129] M.C. Zanetti, S. Fiore, B. Ruffino, E. Santagata, D. Dalmazzo & M. Lanotte (2015). “Characterization of crumb rubber from end-of-life tyres for paving applications”, Waste Management, vol. 45, pp. 161-170, https://doi.org/10.1016/j.wasman.2015.05.003

[130] E. Santagata, O.Baglieri, M. Alam, M. Lanotte & P.P. Riviera (2015). “Evaluation of rutting resistance of rubberized gap-graded asphalt mixtures”, Proceedings, 6th International Conference Bituminous Mixtures and Pavements, Thessaloniki, Greece, 10-12 June, 2015, pp. 407-412.

[131] E. Santagata, O. Baglieri, L. Tsantilis, G. Chiappinelli & I. Brignone Aimonetto (2015). “Effect of sonication on the high temperature properties of bituminous binders reinforced with nano-additives”, Construction and Building Materials, vol. 75, 2015, pp. 395-403, https://doi.org/10.1016/j.conbuildmat.2014.11.021

[132] E. Santagata, M.C. Zanetti & A. Fortunato (2015). “The European project TYREC4LIFE”, Strade & Autostrade, n. 3, 2015, pp. 22-28 (in Italian).

[133] A. Farina, M.C. Zanetti, E. Santagata, G.A. Blengini & S. Fiore (2015). “Crumb rubber in road pavements: life cycle analysis and risk assessment, an integrated approach applied to case studies”, Proceedings, Fifteenth International Waste Management and Landfill Symposium, Santa Margherita di Pula, Italy, 5-9 October, 2015.

[134] E. Santagata & S. Sciamanna (2015). “Experimental and numerical investigation on roughness-related pavement damage progression”, Proceedings, 25th World Road Congress, Seoul, Korea, 2-6 November, 2015, Article number IP583.

[135] E. Santagata, O. Baglieri, P.P. Riviera, M. Lanotte & D. Dalmazzo (2015). “Full performance evaluation of rubberized wearing courses for sustainable road pavements”, Proceedings, 25th World Road Congress, Seoul, Korea, 2-6 November, 2015, Article number IP692.

[136] E. Santagata, O. Baglieri, L. Tsantilis & G. Chiappinelli (2015). “Fatigue and healing properties of nano-reinforced bituminous binders”, International Journal of Fatigue, vol. 80, 2015, pp. 30-39, https://doi.org/10.1016/j.ijfatigue.2015.05.008

[137] E. Santagata, O. Baglieri, L. Tsantilis & G. Chiappinelli (2016). “Storage stability of bituminous binders reinforced with nano-additives”, Proceedings, 8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials, Ancona, Italy, 7-9 October, 2015, RILEM Bookseries, vol. 11, pp. 75-87, https://doi.org/10.1007/978-94-017-7342-3_7

[138] E. Santagata, O. Baglieri, M. Alam & P.P. Riviera (2016). “Evaluation of rutting properties of bituminous binders by means of single shear creep-recovery (SSCR) tests and correlation with mixture performance”, Proceedings, 8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials, Ancona, Italy, 7-9 October, 2015, RILEM Bookseries, vol. 11, pp. 745-756, https://doi.org/10.1007/978-94-017-7342-3_60

[139] E. Santagata, O. Baglieri, D. Dalmazzo & L. Tsantilis (2016). “Experimental investigation on the combined effects of physical hardening and chemical ageing on low temperature properties of bituminous binders”, Proceedings, 8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials, Ancona, Italy, 7-9 October, 2015, RILEM Bookseries, vol. 11, pp. 631-641, https://doi.org/10.1007/978-94-017-7342-3_51

[140] A. Sapora, P. Cornetti, A. Carpinteri, O. Baglieri & E. Santagata (2016). "The use of fractional calculus to model the experimental creep-recovery behavior of modified bituminous binders”, Materials and Structures, vol. 49:1-2, pp. 45-55, https://doi.org/10.1617/s11527-014-0473-6

[141] E. Santagata, M. Lanotte, O. Baglieri, D. Dalmazzo & M.C. Zanetti (2016). “Analysis of bitumen–crumb rubber affinity for the formulation of rubberized dry mixtures”, Materials and Structures, vol. 49:5, pp. 1947-1954, https://doi.org/10.1617/s11527-015-0625-3

[142] O. Baglieri, E. Santagata, P.Z. Laterza & S. Lisi (2016). “Experimental study on the evolution of geometric characteristics of switches and crossings: application of the new RFI standard directives”, Ingegneria Ferroviaria, vol. 9, pp. 661-676.

Page 14 of 14

[143] E. Santagata, O. Baglieri, L. Tsantilis, D. Dalmazzo & G. Chiappinelli (2016). “Fatigue and healing properties of bituminous mastics reinforced with nano-sized additives”, Mechanics of Time-Dependent Materials, vol. 20:3, pp. 367-387, https://doi.org/10.1007/s11043-016-9301-4

[144] M.C. Zanetti, E. Santagata, S. Fiore, B. Ruffino, D. Dalmazzo & M. Lanotte (2016). “Evaluation of potential gaseous emissions of asphalt rubber bituminous mixtures. Proposal of a new laboratory test procedure”, Construction and Building Materials, vol. 113, pp. 870-879, https://doi.org/10.1016/j.conbuildmat.2016.03.101

[145] E. Santagata, O. Baglieri, L. Tsantilis, G. Chiappinelli & D. Dalmazzo (2016). “Bituminous-based nanocomposites with improved high-temperature properties”, Composites Part B, vol. 99, pp. 9-16, https://doi.org/10.1016/j.compositesb.2016.05.020

[146] O. Baglieri, E. Santagata, A. Sapora, P. Cornetti & A. Carpinteri (2017). “Fractional viscoelastic modeling of anti-rutting response of bituminous binders”, Journal of Engineering Mechanics, vol. 143:5, Article number D4016002, https://doi.org/10.1061/(asce)em.1943-7889.0001081

[147] A. Farina, M.C. Zanetti, E. Santagata & G.A. Blengini (2017). “Life cycle assessment applied to bituminous mixtures containing recycled materials: crumb rubber and reclaimed asphalt pavement”, Resources, Conservation and Recycling, vol. 117, part B, pp. 204-212, https://doi.org/10.1016/j.resconrec.2016.10.015

[148] D. Dalmazzo, A. Vercelli, E. Santagata, B. Ruffino & M.C. Zanetti (2017). “Rheological characterization and performance-related evaluation of paint sludge modified binders”, Materials and Structures, vol. 50:1, Article number 74, https://doi.org/10.1617/s11527-016-0945-y

[149] E. Santagata, O. Baglieri, P.P. Riviera & M. Alam (2017). "Correlating creep properties of bituminous binders with anti-rutting performance of corresponding mixtures”, International Journal of Pavement Research and Technology, vol. 10:1, pp. 38-44, https://doi.org/10.1016/j.ijprt.2016.11.008

[150] E. Santagata, O. Baglieri, L. Tsantilis & G. Chiappinelli (2016). “Re-use in asphalt pavements of fillers from natural stone sawmilling”, submitted to the International Congress on Transport Infrastructure and Systems, Rome, Italy, 10-12 April, 2017, pp. 371-378, https://doi.org/10.1201/9781315281896-50

[151] E. Santagata, O.Baglieri, P.P. Riviera, M. Lanotte & M. Alam (2017). “Influence of lateral confining pressure on flow number tests”, Proceedings, Tenth International Conference on the Bearing Capacity of Roads, Railways and Airfields, BCRRA 2017, Athens, Greece, 28-30 June, 2017, pp. 237-242, https://doi.org/10.1201/9781315100333-31

[152] E. Santagata, L. Tsantilis & D. Dalmazzo (2017). “Fatigue characterization of bituminous binders containing crumb rubber from end-of-life tires”, Proceedings, Sixth International Conference On Advances in Civil, Structural and Mechanical Engineering - ACSM 2017, Bangkok, Thailand, 25-26 February, 2017, pp. 51-56, https://doi.org/10.15224/978-1-63248-118-4-34

[153] E. Santagata, O. Baglieri, D. Dalmazzo & L. Tsantilis (2017). “Investigating cohesive healing of asphalt binders by means of a dissipated energy approach”, International Journal of Pavement Research and Technology, vol. 10:5, pp. 403-409, https://doi.org/10.1016/j.ijprt.2017.06.004

[154] M.C. Zanetti, B. Ruffino, E. Santagata, D. Dalmazzo & M. Lanotte (2018). “Determination of crumb rubber content of asphalt rubber binders”, Journal of Materials in Civil Engineering, vol. 30:4, Article number 04018041, https://doi.org/10.1061/(asce)mt.1943-5533.0002213

[155] M.C. Zanetti, B. Ruffino, A. Vercelli, D. Dalmazzo & E. Santagata (2018). “Reuse of paint sludge in road pavements: technological and environmental issues”, Waste Management & Research, vol. 36:11, pp. 1023-1028, https://doi.org/10.1177/0734242x18804628

[156] F. Miglietta, B.S. Underwood, L. Tsantilis, O. Baglieri, K.E. Kaloush & E. Santagata (2018). "Fatigue properties of nano-reinforced bituminous mixtures: a viscoelastic continuum damage approach”, International Journal of Pavement Research and Technology, vol. 11, pp. 766-773, https://doi.org/10.1016/j.ijprt.2018.04.004

[157] L. Tsantilis, O. Baglieri & E. Santagata (2018). “Low-temperature properties of bituminous nanocomposites for road appplications”, Construction and Building Materials, vol. 171, pp. 397-403, https://doi.org/10.1016/j.conbuildmat.2018.03.154

[158] O. Baglieri, L. Tsantilis & E. Santagata (2018). “Evaluation of healing potential of bituminous binders using a viscoelastic continuum damage approach”, Construction and Building Materials, vol. 184, pp. 344-350, https://doi.org/10.1016/j.conbuildmat.2018.05.228

[159] E. Choorackal, P.P. Riviera, D. Dalmazzo, E. Santagata, L. Zichella & P. Marini (2018). “Reuse of recycled asphalt pavement and mineral sludges in fluidized thermal backfills”, Proceedings, 6th International Conference on Sustainable Solid Waste Management, NAXOS2018, Naxos, Greece, 13-16 June, 2018.

Page 15 of 14

[160] P.P. Riviera, G. Bertagnoli, E. Choorackal & E. Santagata (2019). “Controlled low-strength materials for pavement foundations in road tunnels: feasibility study and recommendations”, Materials and Structures, vol. 52:4, Article number 72, https://doi.org/10.1617/s11527-019-1367-4.

[161] E. Santagata, O. Baglieri, F. Miglietta, L. Tsantilis & P.P. Riviera (2019). “Impact of nano-sized additives on the fatigue damage behaviour of asphalt mixtures”, Fatigue & Fracture of Engineering Materials & Structures, vol. 42:12, pp. 2738-2746, https://doi.org/10.1111/ffe.13110.

[162] L. Tsantilis, D. Dalmazzo, O. Baglieri & E. Santagata (2019). “Effect of SBS molecular structure on the rheological properties of ternary nanomodified bituminous binders”, Construction and Building Materials, vol. 222, 2019, pp. 183-192, https://doi.org/10.1016/j.conbuildmat.2019.06.095

[163] E. Choorackal, P.P. Riviera & E. Santagata (2019). “Mix design and mechanical characterization of self-compacting cement-bound mixtures for paving applications”, Construction and Building Materials, vol. 229, 116894, https://doi.org/10.1016/j.conbuildmat.2019.116894

[164] D. Dalmazzo, A. Jiménez del Barco Carrión, L. Tsantilis, D. Lo Presti & E. Santagata (2020). “Non-petroleum-based binders for paving applications: rheological and chemical investigation on ageing effects”, Accepted for publication in Proceedings, 5th ISAP International Symposium on Asphalt Pavement and Environment (APE), Padua, Italy, 11-13 September, 2019, Lecture Notes in Civil Engineering, vol. 48, pp. 67-76, https://doi.org/10.1007/978-3-030-29779-4_7

[165] P.P. Riviera, E. Choorackal & E. Santagata (2020). “Performance evaluation of innovative and sustainable pavement solutions for road tunnels”, Proceedings, 5th ISAP International Symposium on Asphalt Pavements and Environment (APE), Padua, Italy, 11-13 September, 2019, Lecture Notes in Civil Engineering, vol. 48, pp. 407-416, https://doi.org/10.1007/978-3-030-29779-4_40

[166] E. Choorackal, P.P. Riviera, D. Dalmazzo, E. Santagata, L. Zichella & P. Marini (2020). “Performance-related characterization of fluidized thermal backfills containing recycled components”, Waste and Biomass Valorization, 11, pp. 5393-5404, https://doi.org/10.1007/s12649-019-00650-9

[167] E. Santagata, S. Yeganeh, O.E.M. Idris, M.H.M.M. Ali & K.M.I Al-Emadi (2020). “Test procedures for advanced characterization of bituminous binders employed for pavement construction in Public Works Authority road projects - State of Qatar”, Proceedings, International Conference on Civil Infrastructure and Construction (CIC 2020), 2-5 February, 2020, Doha, Qatar, pp. 502-511, https://doi.org/10.29117/cic.2020.0063

[168] E. Santagata, H. Sebaaly, O.E.M. Idris, M.H.M.M. Ali & K.M.I Al-Emadi (2020). “Use of crumb rubber modified binders and asphalt mixtures in Public Works Authority road projects - State of Qatar”, Proceedings, International Conference on Civil Infrastructure and Construction (CIC 2020), 2-5 February, 2020, Doha, Qatar, pp. 512-521, https://doi.org/10.29117/cic.2020.0064

[169] S. Yeganeh, M. Ameri, D. Dalmazzo & E. Santagata (2020). “Experimental investigation on the use of waste elastomeric polymers for bitumen modification”, Applied Sciences, vol. 10:8, 2671, https://doi.org/10.3390/app10082671

[170] E. Santagata, E. Choorackal & P.P. Riviera (2020). “Self-compacting cement-bound pavement foundations for road tunnels: performance assessment in field trials”, International Journal of Pavement Engineering, https://doi.org/10.1080/10298436.2020.1825709

[171] L. Tsantilis, G. Chiappinelli, O. Baglieri, P.P. Riviera, F. Miglietta & E. Santagata (2020). “Performance characteristics of nano-modified asphalt mixtures”, Proceedings, 9th International Conference on Maintenance and Rehabilitation of Pavements (MAIREPAV9), Zürich, Switzerland, 1-3 July, 2020, Lecture Notes in Civil Engineering, vol. 76, pp. 587-595, https://doi.org/10.1007/978-3-030-48679-2_55

[172] P.P. Riviera, D. Dalmazzo & E. Santagata (2020). “Laboratory tests for the characterization of cold asphalt patching mixtures”, Proceedings, 9th International Conference on Maintenance and Rehabilitation of Pavements (MAIREPAV9), Zürich, Switzerland, 1-3 July, 2020, Lecture Notes in Civil Engineering, vol. 76, pp. 67-77, https://doi.org/10.1007/978-3-030-48679-2_7

[173] L. Urbano, D. Dalmazzo, P.P. Riviera & E. Santagata (2019). “Performance assessment of rubberized mixtures containing reclaimed asphalt and a viscosity reduction additive”, Proceedings, 9th International Conference on Maintenance and Rehabilitation of Pavements (MAIREPAV9), Zürich, Switzerland, 1-3 July, 2020, Lecture Notes in Civil Engineering, vol. 76, pp. 457-467, https://doi.org/10.1007/978-3-030-48679-2_43

[174] B. Ruffino, A. Farina, D. Dalmazzo, G.A. Blengini , M.C. Zanetti & E. Santagata (2020). “Cost analysis and environmental assessment of recycling paint sludge in asphalt pavements”, Environmental Science and Pollution Research, https://doi.org/10.1007/s11356-020-10037-2

Page 16 of 14

[175] E. Santagata, F. Miglietta, O. Baglieri & L. Tsantilis (2020). “Effect of temperature on self-healing properties of bituminous binders”, Proceedings, RILEM International Symposium on Bituminous Materials (ISBM), Lyon, France, 14-16 December, 2020.

[176] D. Dalmazzo, L. Urbano, P.P. Riviera & E. Santagata (2020). “Testing of reclaimed asphalt model systems for the evaluation of the effectiveness of rejuvenators”, Proceedings, RILEM International Symposium on Bituminous Materials (ISBM), Lyon, France, 14-16 December, 2020.

[177] E. Santagata, C. Tozzi, O. Baglieri & D. Dalmazzo (2020). “Comparative evaluation of different methods for assessing the glass transition temperature of bituminous binders”, Proceedings, RILEM International Symposium on Bituminous Materials (ISBM), Lyon, France, 14-16 December, 2020.

[178] L. Zichella, E. Choorackal, M. Airoldi, P.P. Riviera, R. Bellopede & E. Santagata (2020). “Performance assessment of fluidized thermal backfills containing sawing sludge”, Applied Sciences, vol. 10:22, 8243, https://doi.org/10.3390/app10228243.

[179] O. Baglieri, C. Tozzi, D. Dalmazzo, L. Tsantilis & E. Santagata (2020). “A novel methodology for the evaluation of low temperature failure properties of asphalt binders”, submitted to Materials and Structures, October 2020.

[180] F. Miglietta, L. Tsantilis, O. Baglieri & E. Santagata (2020). “A new approach for the evaluation of time-temperature superposition effects on the self-healing of bituminous binders”, submitted to Construction and Building Materials, October 2020.

[181] R. Salehfard, H. Behbahani, D. Dalmazzo & E. Santagata (2020). “Effect of colloidal instability on the rheological and fatigue properties of asphalt binders”, submitted to Construction and Building Materials, October 2020.

[182] D. Lo Presti, J. Gallego Medina, J. Carvalho Pais, L. Poulikakos, M. Bueno, D. Dalmazzo & E. Santagata (2020). “Civil Engineering Applications: Utilization of Rubberised Asphalt in Europe”, in Tyre Waste and Recycling, Elsevier.

[183] H. Sebaaly, P.P. Riviera, S. Varma, J.W. Maina & E. Santagata (2020). “Performance-based assessment of the rutting resistance of asphalt mixes designed for hot climate regions”, accepted for publication in the International Journal of Pavement Engineering, November 2020, https://doi.org/10.1080/10298436.2020.1858484

[184] L. Tsantilis, S.B. Underwood, F. Miglietta, P.P. Riviera, O. Baglieri, E. Santagata (2020). “Ageing effects on the linear and nonlinear viscoelasticity of bituminous binders”, submitted to the 9th European Asphalt Technology Association (EATA) Conference, 7-9 June, 2021, Vienna, Austria.

[185] M. Motevalizadeh, A. Kavussi, L. Tsantilis, D. Dalmazzo & E. Santagata (2020). “Investigating the influence of fine RAP on bituminous mixtures at the mastic scale: viscoelastic analyses and micromechanical modelling”, submitted to Road Materials and Pavement Design, November 2020.