fast protec system training course - introduction
DESCRIPTION
The Fast Protec System was devised by a dental technician to satisfy the main dental lab needs It is a combination of 3 fundamental elements: 1) Products making up the system 2) Materials used for processing 3) Methodology Comparing with traditional system, Fast Protec guarantees: - A halving of processing times - An excellent quality standard - A reduction of waste material - A clean way to work With Fast Protec System a dental technician can perform: - Temporary - Partial Mobile Prosthesis - Ceramic Moulding - Pressed Full Prosthesis - Skeleton Prosthesis - Bite - Immediate Pre-filing Temporary - Toronto Bridge - Full Prosthesis FAST PROTEC: The Best Way to WorkTRANSCRIPT
![Page 1: Fast Protec System Training Course - Introduction](https://reader031.vdocument.in/reader031/viewer/2022020207/5593076f1a28ab0f498b45a6/html5/thumbnails/1.jpg)
Training Course Introduction
![Page 2: Fast Protec System Training Course - Introduction](https://reader031.vdocument.in/reader031/viewer/2022020207/5593076f1a28ab0f498b45a6/html5/thumbnails/2.jpg)
Summary • Fast Protec System • Products • Materials • Methodology • Time Benefits for Processing • Cost Benefits for Full Prosthesis
2
![Page 3: Fast Protec System Training Course - Introduction](https://reader031.vdocument.in/reader031/viewer/2022020207/5593076f1a28ab0f498b45a6/html5/thumbnails/3.jpg)
Fast Protec System • The Fast Protec System was devised by a dental technician to satisfy the main dental lab needs
• It is a combination of 3 fundamental elements: • Products making up the system • Materials used for processing • Methodology
• Comparing with traditional system, Fast Protec guarantees: 1 A halving of processing times 2 An excellent quality standard 3 A reduction of waste material 4 A clean way to work
3
![Page 4: Fast Protec System Training Course - Introduction](https://reader031.vdocument.in/reader031/viewer/2022020207/5593076f1a28ab0f498b45a6/html5/thumbnails/4.jpg)
Products -‐ The Core of the System
1 All-‐In, a three-‐axis verticulator with integrated muffle 2 Implant Box, muffle with an integrated split-‐cast 3 Articulator, realized with magnetic condyles without
constraints 4 Base Gum, used to make the model base and
magnetically attached on All-‐In and Articulator magnetic
4
![Page 5: Fast Protec System Training Course - Introduction](https://reader031.vdocument.in/reader031/viewer/2022020207/5593076f1a28ab0f498b45a6/html5/thumbnails/5.jpg)
Products -‐ Accessories 1 Base for Temp, split-‐cast for temporaries 2 Fast Clean, used for fitting the model on the Articulator
via silicone 3 Teeth Clean, 14 slot basket for cleaning teeth 4 Fast for Plaster, used for adapting any articulator to
Fast Protec system
5
![Page 6: Fast Protec System Training Course - Introduction](https://reader031.vdocument.in/reader031/viewer/2022020207/5593076f1a28ab0f498b45a6/html5/thumbnails/6.jpg)
Materials • The primary materials used with the system are: • Silicones • Cold self-‐curing resins (cadmio free)
• Using silicon instead of plaster, any dental technician can work on a clean bench and does not need a dedicated plaster room
• During processing both a precision silicon (Fast Precision Blue) and a fitting silicone (Fast Putty) are used
• The resin is un-‐shrinkable and bubble free
6
![Page 7: Fast Protec System Training Course - Introduction](https://reader031.vdocument.in/reader031/viewer/2022020207/5593076f1a28ab0f498b45a6/html5/thumbnails/7.jpg)
Materials -‐ Silicones 1 Fast Precision Blue, absolute precise, stable in the
long-‐term and malleable 2 Fast Putty, used to fill up the muffle (fitting silicone) 3 Fast Traspa, precise and malleable, its transparency
allows high visibility during the composite injection 4 Teeth Fast and Teeth Fast Trasp, used to reproduce
the model in the male and female mould technique with A + B syringe
5 Fast Spray, used for insulating silicone templates
7
![Page 8: Fast Protec System Training Course - Introduction](https://reader031.vdocument.in/reader031/viewer/2022020207/5593076f1a28ab0f498b45a6/html5/thumbnails/8.jpg)
Materials -‐ Resins 1 Acrilic Fast, extremely fluid, easy polishing, good
adhesion to dental prosthesis and colour stability. It is free from shrinkage and bubble creation. In powder or liquid.
2 Fast Temp, high precise, high gloss and abrasion resistant, it is used for temporaries. In powder or liquid.
8
![Page 9: Fast Protec System Training Course - Introduction](https://reader031.vdocument.in/reader031/viewer/2022020207/5593076f1a28ab0f498b45a6/html5/thumbnails/9.jpg)
Methodology • Fast Protec System creates a working procedure for each dental lab processing
• This procedure allows a dental technician to preserve the finished work after each step
• If there is trouble during the processing, you do not have to restart from the beginning and so throw away all the work
BUT • You can step back and go on from the previous phase keeping the work you have made until that moment
9
![Page 10: Fast Protec System Training Course - Introduction](https://reader031.vdocument.in/reader031/viewer/2022020207/5593076f1a28ab0f498b45a6/html5/thumbnails/10.jpg)
Methodology • In a couple of days a dental technician can train a new employee to use the system for the main dental lab processing
• After the training, the employee is completely independent and can easily finish the processing all alone
• Following the procedure a dental technician can perform a job automatically and without making mistakes
10
![Page 11: Fast Protec System Training Course - Introduction](https://reader031.vdocument.in/reader031/viewer/2022020207/5593076f1a28ab0f498b45a6/html5/thumbnails/11.jpg)
Time Benefits for Processing
11
Processing Traditional Systems
Fast Protec
Temporary 80 minutes 35 minutes
Partial Mobile Prosthesis
100 minutes 45 minutes
Ceramic Moulding 50 minutes 25 minutes
Pressed Full Prosthesis 90 minutes 40 minutes
Skeleton Prosthesis 90 minutes 40 minutes
Bite 100 minutes 45 minutes
Immediate Pre-‐filing Temporary
60 minutes 30 minutes
Toronto Bridge 90 minutes 45 minutes
Full Prosthesis 180 minutes 60 minutes
![Page 12: Fast Protec System Training Course - Introduction](https://reader031.vdocument.in/reader031/viewer/2022020207/5593076f1a28ab0f498b45a6/html5/thumbnails/12.jpg)
Cost Benefits for Full Prosthesis
12
Processing Full Prosthesis
System Traditional Fast Protec
Materials Used Plaster Hot Acrylic Resin
Silicone Cold Self-‐curing Resin
Time Taken 180 minutes 60 minutes
Material Costs 4,00 € 7,00 €
Time Costs * 60,00 € 20,00 €
Total Costs 64,00 € 27,00 €
Comparison Costs + 37,00 € -‐ 37,00 €
* Average cost estimated per employee: 20,00 € per hour
Fast Protec System reduces the cost of a prosthesis by 58%
![Page 13: Fast Protec System Training Course - Introduction](https://reader031.vdocument.in/reader031/viewer/2022020207/5593076f1a28ab0f498b45a6/html5/thumbnails/13.jpg)
13
The Best Way to Work Web Site
www.fastprotec.com
E-‐mail [email protected]
Phone Number
0039 (0)432650047