TR-S1.3AHD/80-BVAHD 80m Outdoor Bullet Camera

Before providing power for the camera, please read this user guide.

Do not attempt to disassemble the camera. If the camera does not work, please contact us or your local distributor.

SPECIFICATIONS

FEATURES

NOTES:

Model Number TR-S1.3AHD/80-BV

Platform Varifocal lens

Sensor Chip 1/3" Sony 1.3 MP sensor

TV System NTSC / PAL (selectable by OSD menu)

Resolution 1.3MP

IR Distance 80 meters (4 pcs super IR LED's)

Lens 6-22mm varifocal lens

Min. Illumination 0.01 Lux / F1.2

S/N Ratio >50dB

Scanning System 2:1 interlace scan

Shutter Speed Up to 1/100,000 s

Video Output 1Vp-p, 75Ω

Video Compression N/A

Bit Rate N/A

Max Image Size N/A

Frame Rate N/A

Streaming N/A

Protocol Compliancy N/A

Protocol N/A

Wide Dynamic Range Real WDR

Auto Gain Control Yes

Back Light Compensation On / off

DNR 3D-DNR

White Balance Auto

Storage Temperature -30 to 60°C

Operating Temperature -10 to 50°C

Operating Humidity 95% max

Outdoor bullet camera

1.3 MP AHD camera

80m IR distance 6-22mm varifocal lens

www.traicecctv.com

www.facebook.com/traicecctv

www.twitter.com/traicecctv

DISTRIBUTED BY:

OSD MENU CONNECTIONS INTRODUCTION

TROUBLESHOOTING

SCHEMATICS

3D-NR ON/OFF intelligent / global / center AE MODE center weight / black light front / light / distinguish AWB-PRO / AWB-TEMPORAL WB AWB-AI / AWB-GW AWB-CCT IMAGE： IMAGE ENHANCE sharpness / contrast / saturation MIRROR ON / OFF FLIP ON / OFF BRIGHTNESS 0, 10, 20,... 250 ZOOM IN 0, 1, 2, 3, 4, 5

DAY&NIGHT external / color / b&w / autoZONE COLOR mosaic / white / yellow / cyanMASKING green / magenta / red / blue / black AREA NO.0 - AREA NO.8

MOTION SENSITIVITY DIRECTION weak / low / middle / high AREA NO.0 - AREA NO.4VIDEOSTANDARD PAL / NTSC LANGUAGE CHINESE / ENGLISHLOAD DEFAULTSOFT VERSIONSAVE&EXITEXIT

VIDEO

DC12V

DC12V POWER SUPPLY

TR-S1.3AHD/80-

KEYBOARD

PRESS

MENU

POLARITY GUIDE

GND VIDEOVIDEO

POWER

1. NO VIDEO OUTPUT AFTER PROVIDING POWER Check power supply stability Check power supply polarity Check video cable signal from camera to DVR using a

TRAICE CCTV tester Test camera output directly from camera to TRAICE CCTV

tester to ensure video cable and termination is correct

2. FLOWING INTERFERENCE RIPPLES ON VIDEO OUTPUT Caused by power supply AC ripples, change power supply Check monitor and DVR

3. CONTINUOUSLY CHANGING VIDEO BACKGROUND COLORS

Caused by fluorescent lighting, change the lighting or increase distance between lighting and camera

Use external synchronization on power supply

4. PICTURE SMEAR Unstable power supply voltage, change the power supply High impedance on cables, check cable quality and

termination

Congratulations for purchasing a TRAICE product. The TR-S1.3AHD/80-BV series is a feature-full product that adopts the latest Sony sensor chip and driver. This camera enjoys high resolution and real-time video capturing that is rich in colour and quality. It is also easy to install with a built-in 3-axis bracket making it both wall mount and ceiling mount.

“Please read this instruction manual carefully to ensure proper use of the product.”

Please note the camera’s storage and operating temperature

Avoid using the camera in environments of very high or very low temperatures.

The operating temperature is -30°C to +60°C

(Recommended operating temperature is -10°C to +50°C)

Never make the camera face the sun or a bright object.

Do not mount the camera near by the radiator or heater.

Do not attempt to disassemble the camera. If the camera does not work, please contact local distributor or our

company

CAUTION: RISK OF ELECTRIC SHOCK, DO NOT OPEN

NOTES:

DVR

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION: TO PREVENT ELECTRIC SHOCKS AND RISK OF FIRE HAZARDS, DO NOT USE OTHER THAN SPECIFIED POWER SOURCE.