fixings / screw brochure

Fixings / Screw Brochure

Profast Ltd is a wholly owned subsidiary of Profast Group Ltd., and operates from a 20,000 Sq Ft facility in Western Industrial Estate, Naas Rd. Dublin 12.

We are one of the largest importers and distributors of fasteners and fixings in Ireland and commenced business in Dublin in 1978. Our strength and expertise has been gained in doing business for over 33 years in our Dublin branch and 55 years in our Belfast branch. We have become specialists in supply and distribution of all types of bolts, nuts etc to the structural steel, general and civil engineering industries.

Profast is a registered ISO 9001:2008 company and we pride ourselves on the high service level we give our customers. Our 33 years in business in Dublin has enabled us to amass a wealth of technical and industry knowledge, which has manifested itself in the loyal support we have from customers over many years.

. .2

We intend to provide an extraordinary level of service at every point of contact with the customer

We treat each customer as individual

Our service must exceed our customers expectations

The first and foremost responsibility of every employee is to serve customers

Pantone 661C = 100 M = 69 Y = 0 K = 9

R

PVCu window construction screws

A growing range of products dedicated to the drylining and light construction trades

A range of quality, everyday products, ideal for the tradesman

Our specialist range for the wood construction industry

A range of window fixings conforming to national standards

. .3

timberfix R

Components for furniture assembly and shop fitting trades

Quality accessories and driver bits

Application data & symbol key

Our specialist range for the solar energy industrytimberfix R

A premium range of anchors, approved resins and insulation fixings from our partners in Switzerland

R

HECOSCHRAUBEN

A range of high performance, fully approved products from our partners in Germany

4

7

10

21

18

32

6

16

28

26

25

Our range of self drilling screws for the steel construction and cladding industry

. .4

timberfix R

timberfix decking screws in tubs

description:

specification:

application:

Diameter: 4.5mmLength: 50mm ~ 80mmTub qty: 500

Packed in strong reuseable tubs. Up to 1000 salt spray resistance. Self countersinking. Type 17 point reduces drive torque.Two free driver bits in each tub.

Countersunk head with new XR2 recess takes both pozi & square drive. Natural brown ACQ resistant coating.

high performance screwtimberfix 360® premium woodscrew

description:

specification:

application:

Diameter: 3.5mm ~ 6.0mmLength: 15mm ~ 150mmBox Qty: 100 ~ 200

Reinforced head with ribs. Shank ribs to reduce drive torqueInnovative thread geometry ~ reduced splitting. Next Generation lubricant system. Packed in two part box with window.

The ‘all-round’- performer. Countersunk pozi recess, hardened, ZYP.

landscaping timber screwstimberfix® & timberfix® plus

description:

specification:

application:

Diameter: 6.3mm ~ 8.0mmLength: 65mm ~ 250mmBox Qty: 50Blister packs of 10

Up to 1000 hr salt spray resistance. No pre-drilling in most timbers. ACQ resistant coating. Type 17 point to reduce drive torque. 6.3mm diameter also available in black finish.

Hex drive structural timber screw. Natural brown high tech coating.

timberfix 360® metal screwcase

description:

specification: Contents approx. 1,750pcs of Timberfix 360° high performance woodscrew. 330mm x 220mm x 50mm.

Metal screw selection case, 10 plastic compartments.

flooring and decking screws

. .5

timberfix R

deckfix® collated

description:

specification:

application:

Diameter: 4mmLength: 55mmBox qty: 1000Outers of 10,000

Requires pozi 2 driver bit (available separately). Self countersinking. Double thread prevents jacking and board movement. High performance thread reduces drive torque.

Collated decking screw, countersunk pozi. High tech green corrosion resistant coating.

deckfix®

description:

specification:

application:

Diameter: 4.5mmLength: 50mm ~ 100mmBox qty: 100 ~ 200

Point of sale stand deals available. Self countersinking. Coarse thread gives faster drive time. Packed in two-part box with window.

Countersunk pozi decking screw. High tech green corrosion resistant coating.

floorfix®

description:

specification:

application:

Diameter: 4mmLength: 55mmBox qt: 1000Outers of 10,000

Requires pozi 2 driver bit (available separately). Self countersinking. Double thread prevents jacking and board movement. High performance thread reduces drive torque.

Collated flooring screw, countersunk pozi, zinc and yellow coating.

. .6

timberfix R

heco-topix solar (bracket fixing screw)

description:

specification:

application:

8.0 x 40 ~ 8.0 x 120

For fixing the Solar Hook onto roof timbers.

Heco-Topix Solar (Bracket fixing screw). Flange head, T-40 A2 Stainless Steel.

hanger bolt

description:

specification:

application:

Complete with three flange nuts DIN6923 and EPDM washerM8 x 160, M8 x 200, M8 x 250, M10 x 200, M10 x 250, M12 x 200, M12 x 300

Suitable for securing solar installations to timber substructure. Also suitable for securing external shuttering to windows / doors.

Hanger Bolt – assembled A2 Stainless Steel.

solar hook

description:

specification:

application:

150 x 60 x 4/65 x 40 x 6

For securing solar panel systems to pantile roofs. Special designs can be made to order, subject to minimum order quantities.

Solar Hook. Standard and adjustable A2 Stainless Steel.

mounting plates, saddle washers and epdm sealing washer

description:

specification:

application:

Mounting plates: 11mm hole, 11 x 40mm plate 80x40x5. 13mm hole, 11 x 40mm plate 110x40x5.

Saddle washers: Suits trapezoidal applications (storm washer.)EPDM Sealing washer: To seal against the elements – used with saddle washer.

A2 Stainless Steel mounting plate, Saddle washer, Black rubber EPDM.

n.b. bespoke pack quantities to suit individual job requirements – please specify when ordering.

. .7

drill screwswc winged csk – light sectionwh winged csk – heavy section

description:

specification:

application:

4.8 ~ 5.0 dia. Lengths 38mm ~ 85mm (light section)65mm ~ 109mm (heavy section) 1000hr Ferroseal coatingBag qty: 50 ~ 100

Timber to steel rails and purlins.

Countersunk, Phillips recess. No.3 and No.5 self drilling point.

hc hex. head – light section (no washer)hc(g16) hex. head – light section (with 16mm galv. bonded washer)

description:

specification:

application:

4.8 ~ 5.5 dia. Lengths 16mm ~ 51mm 1000hr Ferroseal coatingBag qty: 100

Sheet to steel rails and purlins (cold rolled).

Hexagon washer flange with undercut. No.3 self drilling point.

hh hex. head – heavy section (no washer)hh(g16) hex. head – heavy section (with 16mm galv. bonded washer)

description:

specification:

application:

5.5 dia. Lengths 25mm ~ 100mm 1000hr Ferroseal coatingBag qty: 50~100

Sheet to steel rails and purlins (hot rolled).

Hexagon washer flange with undercut. No.4 and No.5 self drilling point.

metal studding screws: tc truss head, cc pancake head, th truss head

description:

specification:

application:

Truss head 4.8 x 16mm No.3pt, 5.5 x 38mm No.5ptPancake head 4.8 x 25mm 5.5 x 25mm No.3 self drilling point 1000hr Ferroseal coatingBag qty: 100

Steel to steel.

Truss head and pancake head.

. .8

hs(g16) stitching screws (with 16mm galv. bonded washer)

description:

specification:

application:

6.3 x 22mm8.0 x 25mm 1000hr Ferroseal coatingBag qty: 100

Sheet to sheet.

Hexagon washer flange with undercut. No.1 (reduced) self drilling point.

general construction screwshs cr3, hc cr3

description:

specification:

application:

4.2 x 13mm4.8 x 16mm4.8 x 19mm No.2 self drilling point5.5 x 25mm No.3 self drilling pointCr3 coatingBox qty: 500 ~ 1000

Assembly and fabrication of heating and ventilation systems.

Hexagon washer flange with undercut. No.4 and No.5 self drilling point.

description:

specification:

application:

5.6dia Lengths 60mm~125mm (light section)85mm ~ 150mm (heavy section)60mm ~ 150mm (Type 17point) Bag qty 50 ~ 100

Composite panel to steel rails and purlins.

High thread, hexagon washer flange with undercut.

pc composite panel screws – light section (with 19mm galv. bonded washer)ph composite panel screws – heavy section (with 19mm galv. bonded washer)pt composite panel screws – type 17 point (with 19mm galv. bonded washer)

description:

specification:

application:

6.3 x 25mm6.3 x 32mm 6.3 x 45mm 1000hr Ferroseal coatingBag qty: 100

To suit 5.5 dia. screw.

Hexagon washer flange with undercut. Type 17 (gash) point.

ht hex. head sheet to timber screws (with 16mm galv. bonded washer)

. .9

epdm washers

description:

specification:

application:

16mm19mm25mm Box qty: 1000

To suit 5.5 dia. screw.

Galvanised EPDM bonded washer.

bianditz magnetic nut setter

description:

specification:

application:

Available in a wide range of sizes – metric 5mm ~ 17mm and imperial 1/4”, 5/16” and 3/8”Length 65mmIndividually packed

Power tool attachment for driving hexagon head fixings.

Magnetic 1/4“ Hex. Drive with special lobular hexagon – increases the contact area with the screw head gaining extra grip and lengthening the life of the tool. Lobular profile achieves 20% higher torque than standard hexagon. Manufactured in Spain.

ferrotek® drill screws

Manufactured in a factory approved to both ISO and automotive TS16949 standards, our Ferrotek® range of drill screws have been designed for optimum performance.

Made from quality hardened steel, the drilling tip is of a special design for quick starting and fast drilling.

Shank ribs and thread notches on the heavy section screws reduce drive torque and remove metal swarf more effectively.

A type 17 (gash point) on the timber screws allow for faster driving with less effort.

Our high performance FerrosealTM coating is an advanced finish, developed in the US for the rigors of the automotive industry.

It exceeds 1000 hour salt spray resistance to ASTM B117 and 15 cycles Kesternich (acid rain) testing.

The coating is a 15-20 micron three part process combining a zinc and aluminium rich system to produce a durable protective finish with self lubricating properties thus reducing heat and drive torque.

Finally the range is packed in colour coded bags for attractive merchandising and is resistant to damp conditions on site whilst minimising packaging waste.

general construction screwshs cr3, hc cr3

. .10

R

HECOSCHRAUBEN

professional wood screws

heco fix plus - backwall screw

description:

specification:

application:

3.0 x 20mm ~ 5.0 x 60 Serrated threadFull thread

Panels to cabinet furniture.

Backwall screw. Flange, Pozi BZP.

heco topix - flooring screw (glazing bead screw)

description:

specification:

application:

3.5 x 30 ~ 3.5 x 60 (Pozi)3.5 x 30 ~ 3.5 x 40 (T-Drive)Box qty: 200 ~ 1000

Tongue and groove flooring – hard and soft woods.Also suitable for glazing beads. Available in A2 stainless steel for facades.

Flooring screw (glazing bead screw). Raised countersunk, T-10 Milled ribs, BZP and ZYP

heco fix plus® - t drive

description:

specification:

application:

Diameter: 2.5mm ~ 6.0mmLength: 10mm ~ 300mmPacking: 200 ~ 1000

Can be used in timber, PVCu, masonry, aerated block and up to 2mm steel.

High performance multi material screw with serrated teethLarge size range, BZP and zinc / yellow. Improved security over pozi drive. Countersunk, pan head and raised head available. Milled ribs and drilled head available, also available stainless steel. T Drive recess to prevent cam out.

description:

specification:

application:

Diameter: 2.5mm ~ 6.0mmLength: 10mm ~ 300mmPacking: 200 ~ 1000

Can be used in timber, PVCu, masonry, aerated block and up to 2mm steel. No pre-drilling in most materials.

High performance multi material screw with serrated teethLarge size range, BZP and zinc / yellow. Countersunk, pan head and raised head available. Milled ribs and drilled head available, also available stainless steel.

heco fix plus® - pozi

. .11

R

HECOSCHRAUBEN

multi-monti a4 stainless steel

description:

specification:

application:

Diameter: 7.5mm ~ 12mmLength: 65 ~ 120mmBox qty: 25 ~ 50

Ideal for use in extreme enviroments. Reusable, ideal for maintenance situations. Bi-metal design for reliability. ETA 05/0011 – Please refer to price list / technical manual for applicable sizes. sizes.

The only stainless steel screw anchor with ETA option 1 approval.

multi-monti tc timber connect

description:

specification:

application:

Sizes in the range of: 7.5 x 10010 x 13012 x 160

Ideal for securing wood components to solid masonry and concrete. Transmission of high tensile and shear forces without any additional construction measures. Can be countersunk, so a single length covers a large number of timber thicknesses. Ideal for sole plates.

The perfect combination of screw anchor and wood screw.

multi-monti masonry anchor

multi-monti countersunk head

description:

specification:

application:

Diameter: 5mm ~ 7.5mmLength: 30mm ~ 160mmBox qty: 50 ~ 200

Stress free installation in brick, stone and block. Close to edge & close grouped installation. Convenient T-drive. Through fixing saves time and money. ETA 05/0010 – Please refer to price list / technical manual for applicable sizes.

The first screw anchor with ETA option 1 approval.

multi-monti® hex, multi-monti® hex flange head

description:

specification:

application:

Diameter: 6mm ~ 20mmLength: 50mm ~ 160mmBox qty: 25 ~ 100’s

Stress free installation in brick, stone and block. Close to edge & close grouped installation possible. Reusable, ideal for maintenance situations. Through fixing saves time and money.

The first screw anchor with ETA option 1 approval.

. .12

R

HECOSCHRAUBEN

type mmsi – with female metric thread

description:

specification:

application:

7.5 x 60, 10.0 x 80 with internal combi thread M8/M1010.0 x 80 with M10 internal

For use with threaded rod. ETA 05/0010 - Please refer to price list/technical manual for applicable sizes.

Type MMSI – with female metric thread . Screw in anchor with internal metric thread. BZP.

flange head

description:

specification:

application:

7.5 x 45, 7.5 x 50 (head dia. 17mm)7.5 x 60 (head dia. 14.5mm)

Assembly rail fixing.

Flange head with T-30 recess BZP.

pan head

description:

specification:

application:

5.0 x 30 ~ 10.0 x 70

Baseplate anchor.ETA 05/0010 - Please refer to price list/technical manual for applicable sizes.

Pan head with T-Drive recess BZP.

studbolt

description:

specification:

application:

6.0 x 60 - stud: M6 x 57.5 x 70 - stud: M8 x 147.5 x 160 - stud: M8 x 1410.0 x 80 - stud: M10 x 1110.0 x 160 - stud: M10 x 11

ETA 05/0010 - Please refer to price list/technical manual for applicable sizes. For use with fixings with internal metric thread.

Screw in anchor with metric stud. BZP

hex + washer

description:

specification:

application:

12.0 x 180 ~ 320Length: 16mm ~ 100mm

Soleplate anchor.

Hex + Washer. Hexagon head including washer DIN 440 BZP.

multi-monti masonry anchor (c0ntinued)

. .13

R

HECOSCHRAUBEN

heco-unix® - top cladding screw

description:

specification:

application:

5.0 x 40 ~ 5.0 x 80

Compression effect in facade construction.

Raised countersunk with patented milling grooves. Full thread with variable thread pitch. With ‘Topix’ tip. A2 stainless steel.

heco unix®

heco-unix® - plus

description:

specification:

application:

3.5 x 20 ~ 6.0 x 120

Gives compression effect when fixing wood and chipboard panels, general wood joint construction. ‘Plus’ tip for improved positioning and driving in man-made boards. Thread pulls the joint together without additional bracing.

Countersunk with milling grooves. Full thread with patented variable pitch. Toothed thread. BZP.

heco-unix® - top

description:

specification:

application:

3.5 x 30 ~ 6.0 x 160

Gives compression effect when fixing wood and chipboard panels, general wood frame construction. Topix tip reduces splitting of material in softwood and most hardwood. Thread pulls the joint together without additional bracing.

Countersunk with milling grooves. Full thread with patented variable thread pitch. With ‘Topix’ tip. BZP.

eye bolt

description:

specification:

application:

6.0 x 40

Installation of M & E/H & V services.

Eye bolt anchor BZP.

. .14

R

HECOSCHRAUBEN

heco topix – professional timber screw – countersunk

description:

specification:

application:

Diameter: 6mm ~ 10mmLength: 80mm ~ 450mmBox qty: 100Stainless available

Shank ribs and patented point reduce drive torque. German regulation approved. T-40 drive recess for secure installation, no pre-drilling in most timbers. Ideal for structural timber to timber connections.

Professional T - drive structural timber screw with countersunk head. Zinc and Yellow coating, also available stainless steel. Assessed by TRADA technologies to BS:5268 and relevant EC5 design codes. Calculation software available. ETA in application.

heco topix – heco topix - professional timber screws - flange washer head

description:

specification:

application:

Diameter: 6mm ~ 10mmLength: 80mm ~ 450mmBox qty: 100

T-40 drive recess for secure installation. No pre-drilling in most timbers. Shank ribs and patented point reduce drive torqueGerman building regulation approved. Ideal for structural timber to timber connections.

T-drive structural timber screw, with flange head. Zinc and yellow coating, also available stainless steel. Assessed by TRADA technologies to BS:5268 and relevant EC5 design codes.Calculation software available. ETA in application.

heco topix t for building insulation

description:

specification:

application:

Diameter: 8mmLength: 200mm ~ 450mmBox qty: 50 ~ 100’s

Topix T transfers compressive and shear loads away from the soft insulation material.

Approved and certified product for securing soft insulation systems in facades and roofs. T-40 drive recess for safe and secure installation. Calculation software available. Certified to DIN 1052 / 2004-08.

structural timber screws

Heco Topix professional woodscrews have been designed specifically for use in softwood and hardwood without pre-drilling.They are available in both carbon steel and stainless steel to maximise suitability across a broad range of applications. There are, however, some instances when it is advisable to either pre-drill or use stainless steel instead of carbon steel. This is because of the natural variations that occur in hardwoods dependant on species, age and humidity. In addition, application loads and uniformity of the joint may vary.

We would recommend spot tests are carried out prior to full installation. Due to high levels of naturally occurring acids within certain timbers it is advisable to use stainless steel fixings in the following materials: Unprocessed European Oak, Western Red Cedar, Sweet Chestnut, Douglas Fir. The above list is by no means exhaustive and is provided as guidance only.

please note: product advice heco topix wood construction screws:

. .15

R

HECOSCHRAUBEN

heco topix cc for roofing trusses, glulam and timber beams

description:

specification:

application:

Diameter: 6.5mm & 8.5mmLength: 100mm ~ 400mmBox qty: 50 ~ 100’s

Head design gives an invisable fixing with a high fire rating. T-drive for safe and secure installation. Screws accept the loads normally applied to the timber.

Approved and certified product for high load bearing timber connections such as Glulam, rafter / purlins, flooring and building renovation work. Assessed by TRADA technologies to BS:5268 and relevant EC5 design codes. Calculation software available. ETA in application.

structural timber screws (continued)

Heco Topix professional woodscrews have been designed specifically for use in softwood and hardwood without pre-drilling.They are available in both carbon steel and stainless steel to maximise suitability across a broad range of applications. There are, however, some instances when it is advisable to either pre-drill or use stainless steel instead of carbon steel. This is because of the natural variations that occur in hardwoods dependant on species, age and humidity. In addition, application loads and uniformity of the joint may vary.

We would recommend spot tests are carried out prior to full installation. Due to high levels of naturally occurring acids within certain timbers it is advisable to use stainless steel fixings in the following materials: Unprocessed European Oak, Western Red Cedar, Sweet Chestnut, Douglas Fir. The above list is by no means exhaustive and is provided as guidance only.

please note: product advice heco topix wood construction screws:

. .16

mungo rangethroughbolts

description:

specification:

application:

European Technical Approval Option 7 for uncracked concreteSpecial design of the clip in stainless steel gives a guaranteed holdTorque controlled expansionZinc plated > 5 micronsM6 - M20Pre installation or through fixing

Railings, steel constructions, machines, facade substructures, high-racks, cable trays.

M2 Throughbolt and m2r Throughbolt stainless steel A4/316.

anchors

description:

specification:

application:

Shield Anchor: Torque controlled expansion, zinc plated > 5mi-crons M6 - M12. Pre installation or through fixing. Length: 12mm ~ 160mm, Box qty: 100 ~ 200.

Please refer to Mungo product guide for specific application data – this is available on request.

MSS Shield Anchor, ESA Drop In Anchor, MAN Ceiling Anchor.

chemical products

description:

specification:

application:

Pure Epoxy: ETA Option 1 for uncracked and cracked concrete with anchor rod and rebar. Fire resistance test cert. F30-F120, suitable for diamond drilled holes, application in damp and water filled drill holes, high loadings. Colour of mortar: grey.

Vinylester mortar, styrene free: ETA Option 7 for uncracked concrete with anchor rod and rebar.German National Approval for masonry, Fire resistance test cert. F30-F120, Universal mortar for highest loads in almost all building materials, application in damp and water filled drill holes. Colour of mortar: grey.

Pure Epoxy: reinforcing steel, steel constructions, profiles, closing of ceiling, repair work, structural connections.

Vinylester mortar, styrene free: steel and wooden constructions, facades, railings, high-racks, reinforcing steel, staircases, ladders, cable trays.

MIT600RE Pure Epoxy, MIT-SE Plus Vinylester mortar, styrene free.

Drop in Anchor: Low edge and anchor distances, small drilling depth, internal thread, Zinc plated > 5microns. M6 - M20. Also available stainless steel. Pre installation.

Ceiling Anchor: Certified for multiple fixings of light weight suspended ceilings according to DIN 18168, also in cracked concrete. Fire resistance test cert. F30-F120. Can be used for overhead fixings, Zinc plated > 5microns. M6 x 40, M6 x 70. Through fixing.

. .17

insulation fixings

description:

specification:

application:

Thermo Universal Anchor: Examined according to ÖNORM B6124 and fulfils all requirements for the use in categories A, B and C. Special head prevents heat losses and protects the nail against penetrating humidity. Through fixing.


MDD-S Thermo Universal Anchor, MDD Insulation Fixing, plastic nail, MIDS Insulation Nail.

Insulation Fixing, plastic nail: With glass fibre reinforced plastic pin, resistant to cold and heat. Do NOT use for overhead fixings. Through fixing.

Insulation Nail: MIDS: Fire resistance test cert. F120, Cap reduces cooling/warming transmission. In combination with MDB discs for soft insulating material. Stainless steel available. Through fixing.

description:

specification:

application:

Jet Plug: Thin cutting thread, centre point, 25mm, 32mm, 39mm Available with or without pan head screw.

Lamps, pictures, rails, small wall mounted shelves.

MJP Jet Plug metal, MHD Cavity Wall Anchor.

Cavity Wall Anchor: Quick and simple installation with setting tool, increased load bearing capability and security. Through fixing.

PLEASE NOTE: Mungo catalogue detailing entire range with full application, specification and certification details available on request

plasterboard fixings

description:

specification:

application:

Nylon Frame Plug for solid materials: Fire resistance test certification F90. Stainless steel also available for outdoor applications. Plug made from high quality polyamide PA6. Through Fixing.

Hammer Screw: Stainless steel also available for outdoor applications. Three different head styles available – countersunk, cylindrical and big. Plug made from high quality polyamide PA6. Through Fixing.

Scaffold Plug: Economical solution for light scaffolds. Corresponding DIN 4420. Tension force 26kN (DIN EN 10002-1: 1991-04). Setting depth marks for correct installation. Plug made from high quality polyamide PA6. Pre Installation. MGV Scaffold screw to suit also available.


MBR Nylon Frame Plug, MNA Hammer Screw, MGD Scaffold Plug.

nylon products

. .18


non-reinforced sectionchs - furniture to non reinforced section

description:

specification:

application:

Diameter: 4.8mmLength: 25mm ~ 38mmPacking: 500

Hi Lo thread. Repair screw. Conforms to BS7412 : 2002.

Countersunk Phillips recess. Zinc and yellow finish.

cst - furniture to non reinforced section

description:

specification:

application:


High performance coating to BS7412 : 2002. Twin thread.


lss - friction stay to non reinforced section

description:

specification:

application:


High performance coating to BS7412 : 2002. Locating lip under the head. Twin thread.

Shallow pan head, Phillips recess. Tebolon - silver finsh.

csd - reinforcement retention

description:

specification:

application:


Self tapping thread. Self drilling point. Conforms to BS7412 : 2002.


reinforced section

. .19


tsa - transom screw

description:

specification:

application:


Part threaded. Self tapping thread, AB Point.

Truncated countersunk Phillips recess. Zinc and yellow finish.

baypole screws

description:

specification:

application:


Suitable for reinforcement up to 2.5mm.

Philips recess, fully threaded, self drill point. BZP.

psd - reinforcement retention

description:

specification:

application:


Self tapping thread. Complies with BS7412 : 2002Self drilling point.

Pan Phillips recess. High tech silver grey finish.

ssd - friction stay to reinforced section

description:

specification:

application:


Locating lip under the head. Complies with BS7412 : 2002.Self drilling point.

Shallow pan head, Phillips recess. Bright zinc plated finish.

assembly screws

. .20


plastic headed nails

description:

specification:

application:

facias and soffits

glazing bridge packers

description:

specification:

application:

drain slot covers

description:

specification:

application:

Available 25mm, 30mm, 40mm, 50mm, and 65mmPacked in 100’s and 250’s

Stainless steel shank. Fine annular rings to maximise gripSharp point for easier wood penetration and large stepped metal head to resist impact damage. UV stable.

Plastic headed nails for facia boards. Available in brown and white.

20mm x 100mm x 5mm24mm x 100mm x 5mm34mm x 80mm x 7mm

Bridge Packers are recommended to ensure correct drainage is achieved. Note – all sealed units must be sitting on ‘bridge’ packers so any water which gets past the outer gaskets has a route to escape. Ideal for fixing door frames, battening, kitchen units, floor levelling and more!

Flat glazing packer with drainage allowance.

Sizes (width x length x thickness):

Used for face drainage. Also ideal for replacing missing or broken drainage caps on uPVC windows and doors.

Universal drain slot cover.

Compatible with many leading profiles.

R

. .21

loose drywall screwsdrywall screw sharp point : fine thread

description:

specification:

application:

Diameter: 3.5mm ~ 4.8mmLength: 25mm ~ 125mmBox Qty: 200 ~1000Outer Qty: 2400~16000Free driver bit in each box

Ideal for securing boards to wood or steel studding up to 0.84mm thick.

Bugle head, Phillips Recess, Hardened, Phosphate and BZP finishes available

drywall screw sharp point : coarse thread

description:

specification:

application:

Diameter: 3.5 mm ~ 4.2mmLength: 25mm ~ 75mmBox qty: 500 ~ 1000Outer qty: 4000 ~ 16000 Free driver bit in each box

Ideal for securing boards to wooden studding.

Bugle head, Phillips Recess, Hardened, Phosphate

drywall screw self drill

description:

specification:

application:

Diameter: 3.5mm ~ 4.2mmLength: 25mm ~ 100mmBox Qty: 200 ~1000Outer Qty: 4000~16000Free driver bit in each box

Ideal for securing boards to steel studding up to 2.5mm thick.

Bugle Head Phillips Recess, Hardened, Self Drilling point, BZP Finish.

dense board screws

description:

specification:

application:

Diameter: 3.9mmLength: 19mm - 55mmBox qty: 500 - 1000Outer Qty: 4000 -16000Free driver bit in each box

Ideal for fixing 'Fermacell', 'Glasroc' and 'dBcheck' dense plasterboards to light metal framework or wooden studding.Head design helps seating of screw without plasterboard damage hi - lo thread with ribs under the head.

Phillips recess, phosphate coated, needle point

specialised drywall screws

. .22

R

reverse thread drywall

description:

specification:

application:

Diameter: 3.9mmLength: 25mm - 42mmBox qty: 1000Outer Qty: 8000 -16000Free driver bit in each box

Ideal for fixing "Toughcheck" and "Duraline" performance plasterboards to light metal framework or wooden studding.

Phillips recess, phosphate coated, needle point

drywall screws wafer head

description:

specification:

application:

Diameter: 4.2mmLength: 13mm ~35mmOuter Qty: 12000 ~ 16000Free driver bit in each box

A metal to metal fixing, ideal for constructing metal stud partitioning

Bugle Head Phillips Recess, Hardened, Self Drilling point, BZP Finish.

collated drywall screwscollated drywall sharp point

description:

specification:

application:

Length: 25mm ~ 75mmBox Qty: 1000Outer Qty: 5000~12000

Universal system suitable for most types of driver gun including Makita, Senco, Ryobi, Hilti and Hitachi etc. Flush seating of the screws in the strip ensures they are kept at a 90 degrees angle to reduce jamming.Autofeed screwdriver bits now available, lengths 125mm ~ 150mm.

Coarse and Fine thread available, phosphate

collated drywall self drill

description:

specification:

application:

Length: 25mm ~ 42mmBox Qty: 1000Outer Qty: 10000~12000

Universal system suitable for most types of driver gun including Makita, Senco, Ryobi, Hilti and Hitachi etc.Autofeed screwdriver bits now available, lengths 125mm ~ 150mm

BZP finish

R

. .23

construction fixingsspeed plug

description:

specification:

application:

Screw size: 4.5 x 30Length 32mmBoxed in 100’s

Combination drive for flexibility, reusable. Fibre Jet Polyamide also available.

Classic reliable design, self tapping screw supplied. Zinc alloy construction.

knock in anchor : zinc alloy

description:

specification:

application:

Size: 6mm x 30mm ~ 6mm x 65mmBox Qty: 100 ~ 200Outer Qty: 1200 ~ 2000

Ideal for fixing straps, brackets, timber battens, partition tracks, signs and vandal resistant applications. Not recommended for overhead use. Recommended loads vary with substrate type, quality and consistency.

Zinc Alloy. Lightweight efficient through fixing, suitable for use in concrete, solid brickwork, and stone.

knock in anchor : all steel

description:

specification:

application:

Size: 6mm x 30mm ~ 6mm x 50mmBox Qty: 100Outer Qty: 1200 ~ 2000

Ideal for fixing straps, brackets, timber battens, partition tracks, signs and vandal resistant applications. Recommended loads vary with substrate type, quality and consistency.

All steel. Bright zinc plated. Lightweight efficient through fixing suit-able for use in concrete, solid brickwork, and stone.

steel ceiling anchor

description:

specification:

application:

Size: 6mm x 40mm ~ 6mm x 65mmBox Qty: 100Outer Qty: 1200 ~ 1600

Ideal for fixing straps, brackets, timber battens, partition tracks. Recommended loads vary with substrate type, quality and consistency.

All steel. Zinc and yellow passivated. Lightweight efficient through fixing suitable for use in concrete, solid brickwork, and stone.

. .24

R

tie wire hangers

description:

specification:

application:

Size: 6mm x 60mmBox Qty: 100Outer Qty: 1000

The applications can include cable tray, ductwork, electrical / lighting trunking, suspended ceilings. Recommended loads vary with substrate type, quality and consistency.

All steel - zinc and yellow passivated. All steel load assisted anchors suitable for the light duty fixing of cables and wires in suspended ceiling applications.

steel ceiling bracket

description:

specification:

application:

Size: 25mm x 25mmBox Qty: 100

Ideal for use with steel nail in anchors.

Mild steel. Bright zinc plated.

masonry frame screw

description:

specification:

application:

Diameter: 7.5mmLength: 42mm ~ 182mmBox Qty: 100Outer Qty: 400~1800Free driver bit in each boxLonger length available within Mungo range

Recommended loads vary with substrate type and quality.

CSK Head, T-30 Drive, Milled notches, Milled ribs. Needle point lead thread ZYP. Medium duty, self tapping fixing suitable for the through fixing of wood, metal and PVCu frames to masonry.

multi purpose tradesman’s gloves

description:

specification:

application:

Packed in bags of 12 pairsCartons of 120 pairsSizes: 8.9.10 (M, L, XL)

Tested to BS EN388 4 1 3 1. PU coating assists grip and offers abrasion and tear resistance whilst being light enough for detailed work.

Lightweight PU coated gloves. Perfect for drylining or general building work.

accessories

masonry frame screw

. .25

woodscrewstwinthread

description:

specification:

application:

Diameter: 4g ~ 12gLength: 1/2" ~ 4"Box qty: 100 ~ 200

Special sizes and finishes available to order. Rohs compliant available to order. Packed in two-part box with window.

Countersunk pozi recess, Hardened, bright zinc plated.

multi-purpose screws - yzp

description:

specification:

application:

Diameter: 3mm ~ 6mmLength: 12mm ~ 160mmBox qty: 100 ~ 200

Special sizes and finishes available to order. Double countersunk for strength. Wax lubricated to aid insertion.Packed in-two part box with window.

Countersunk pozi recess, Hardened, yellow zinc plated.

multi-purpose screws - bzp

description:

specification:

application:

Diameter: 3.5mm ~ 5mmLength: 16mm ~ 100mmBox qty: 100 ~ 200

Special sizes and finishes available to order. Reinforced head for strength. Wax lubricated to aid insertion.

Countersunk pozi recess, Hardened, bright zinc plated.

multi-purpose screws - pan head

description:

specification:

application:

Diameter: 3.5 ~ 5mmLength: 12mm ~ 40mmBox Qty: 200

Special sizes and finishes available to order. Reinforced head for strength. Wax lubricated to aid insertion.

Pan pozi recess, hardened, Bright Zinc Plated.

. .26

screw accessoriesplastic partsplastic expansion plugs

description:

specification:

application:

Colour coded for each screw diameterLength: 25mm ~ 70mmInnovative multi-function plug

Can be used in both masonry and hollow wall situations.

Available in brown, red, blue and yellow.

power tool accessoriesstandard driver bits - s2 steel

description:

specification:

application:

Length 25mm & 50mmPozi 1, 2 & 3Phillips 1, 2 & 3T Drive T10, T15, T20, T25, T30, T40.

Special sizes available to order. Titanium coated bits available.

Pozi bits in zinc and yellow finish. Phillips and t-drive bits in shotblast finish.

frame packers

description:

specification:

application:

Small (55mm x 45mm) Large (100mm x 45mm) Thicknesses 1mm, 3mm, 5mm, 6mm and 10mm (10mm large only).Also available: Flat, bridge & wedge packers, and drainslot covers.

To align uneven surfaces typically door frames, windows, dry-lining and stud wall levelling.

Plastic horseshoe packer on snap-off grid.

auto feed gun driver bits

description:

specification:

application:

Length 125mm, 130mm, 140mm, 150mmSpecial sizes available to orderPozi 2 & Phillips 2

Ideal for all makes of autofeed screwdrivers

Pozi bits in zinc and yellow finish. Phillips bits in shotblast finish.

. .27

screw accessoriespremium quality driver bits

description:

specification: Pozi, Phillips, T-drive, Slotted, Square, Hex, SecurityLengths from 25mm ~ 150mmRecess sizes from 0 ~ 4Titanium, Hi torq, and Anti cam out bits available

Vast range of top quality driver bits from SpainAvailable in blister packs or selection sets.

screwdriver bit sets

description:

specialist screwdriver bits

description:

professional accessories

description:

Mixed piece sets - available with PH/PZ/Torx combinations + magnetic bit holders and magnetic quick grip.

Wide range available suitable for trade, DIY and retail markets.

Also available are:

5/16” impact bits: PH, PZ, TX, Hex and Slotted 10mm hex. bits: Hex, TX, XZN, Square and Ribe

Complete range available of screwdrivers, bit holders adapters and more!

. .28

assembly screwscarcass screwsfunnel head screws

description:

specificationcaracss:

Diameter: 4mmLength: 33mm & 45mmBoxed to customers requirementsSmall head diameter 6.7mmLarge head diameter 7.3mm

Small & large head, Funnel head, Pozi recess. BZP and Phosphate.

Diameter: 8g (4mm)Length: 33mm, 45mm & 55mmPhosphate only

euroscrews

description:

specification: Diameter: 6.3mmLength: 10.5mm, 13.5 mmBoxed in 1000's

Pozi recess, BZP.

specificationfunnel head:

joint connector bolts and nuts

description:

specification: Joint connector bolts M6 x 12 ~ M6 x 50Joint connector nut M6 x 12, M6 x 17Pack qty: 50

Cabinets, chairs, desks, shop fittings and tables.application:

BZP, M4 Allen key drive.

confirmat screws

description:

specification: M7 x 50Pack qty: 100

BZP connecting screw. Allen key drive.

Assembly of carcase / furniture butt joints.application:

. .29

screw cups

description:

specification: Available in brass or nickel plated steel and solid brass self colour.Turned pattern available solid brass self colour No.6 & No.8Boxes of 200

Surface screw cup and turned pattern socket.

domed plastic cover caps

description:

specification: Suitable for screw sizes 6g & 8gAvailable in white, black, light brown, dark brown and Chrome

Two part decorative cap system.

decorative components

screw cover caps

description:

specification: Suitable for screw sizes 6g & 8g (push on pozi and hinged)Suitable for screw sizes 10g & 12g (hinged only)T-30 caps available for use with frame screws Available in various colours

Decorative cap system.

mirror screws + domed head / polished chrome disc / satin chrome disc

description:

specification: Domed / disc caps fix into drilled countersunk.Pack qty: 10

Drilled countersunk screw with chrome cover cap.

Fixing mirrors with attractive cover cap for professional finish.application:

stand off wall fixings

description:

specification: Two part fixing12 x 20mm15 x 25mmPack qty: 10

Satin chrome and polished chrome.

Attractive modern sign mounting fixing.application:

. .30

kd & modesty blocks

description:

specification: Available in various colours3 part KD block or single part modesty block

Made from durable polyamide.

cross dowels & tee nuts

description:

specificationtee nuts:

M6 x 9, M8 x 11, M8 x 17.5Pack qty: 10

M6 x 14 ~ M6 x 25Pack qty: 50

Tee Nuts, 4 pronged, BZP.Cross Dowels, slotted, BZP.

specificationcross dowels:

Typical applications for Tee nuts include furniture, bed headboards and shop fittings. Cross dowels used in conjunction with joint connector bolts provides a tight, heavy duty joint. Typically used in cabinets, chairs, desks and tables.

application:

insert nuts

description:

specification: Type D M6 x 13, M6 x 20Type E M6 x 13, M6 x 20Pack qty: 50

Types D & E, ZYP.

Audio equipment, cabinets, chairs, desks and shop fittings. Used where a strong permanent thread for wood and wood based sheet materials is required.

application:

inter screws

description:

specification: Male and female parts screw together to give strong tight fixingM4 Steel, BZPM6 Plastic, WhitePack qty: 10

Two part inter screw.

Joins board or carcase units together. For use with 28mm – 42mm material.

application:

assembly components

. .31

adjustable wedges

description:

specification: 1mm – 8mmBreaks off easily at 8 different thicknessesPack qty: 50

Brown plastic wedge strip.

To compensate for uneven surfaces and floors ensuring furniture and kitchen units are level.

application:

furniture assembly – allen key

description:

specification: M4Pack qty: 2

Hexagon setting tool.

For tightening self assembly furniture fixings.application:

cam dowels and cam locks

description:

specification: Cam Dowel 24mm, 34mmCam Lock 15mm, 18mmPack qty: 50

BZP Assembly components. Concealed fixing.

For fixing panels and frames in furniture assembly.application:

shelf supports (white plastic / steel / glass support)

description:

specification: Available white plastic, BZP steel, glass support with clear plastic cover.Pack qty: 100

Push in to suit 5mm hole.

Fix into pre-drilled hole.application:

Application charts

APPLICATION Timberfix Timberfixplus Floorfix Deckfix Heco

TopixHeco Topix

Stainless Steel

Decking Board X X

Decking Post X X X

Decking Joist X X X

Landscaping X X

Fencing X X

Beams X X X

Roof Trusses X

Roofing Joist X X X

Warm Roofing Insulation X

Insulation Panels X

Stair Construction X X X

Wood Construction X X X

Timber Flooring X

timber construction

APPLICATION Hecofix plus Hecofix Topix Multi Monti

Soft woods X X

Hard Woods - MDF, Beech, Oak X X

Sheet Metal < 2mm X

Timber X X

Plastic X

Decking X

Concrete X

Brick (* pilot hole required) X* X

Heco Schrauben

APPLICATIONCHSCSTCSN

LSS SSD CSDRSD CMD PSD TSA BAYPOLE

Furniture to non - reinforced section X

Friction stay to non - reinforced section X

Furniture to - reinforced section X X

Friction stay to - reinforced section

Reinforcement retention in single chamber sections X

Reinforcement retention in multi chamber sections X

Frame to frame X

Baypole X

window screws

APPLICATION Finethread

Coarsethread

Self drill

Dense boardscrews

Reverse threadscrews

Wafer headdrywall

Plasterboard to lightweight metal stud partitions < 1.00mm thick X

Plasterboard to metal stud partitions < 3.00mm thick X

Plasterboard to timber partitions X X

dbcheck high performance plasterboard X

Fermacell high performance plasterboard X

Glasroc high performance plasterboard X

Tough check high performance plasterboard X

Duraline high performance plasterboard X

Assembly of metal stud partitions and suspension systems X

powerline

. .32

Please use appropriate protective equipment when using these products Loading guidelines vary depending on substrate type and consistency. Please ensure that the site is surveyed correctly before

selecting a particular product for a specific application.

. .33

imperial metric imperial metric

2g 2mm 1/4 6mm

3g 2.5mm 3/8 10mm

4g 3mm 1/2 12mm

5g 3mm 5/8 16mm

6g 3.5mm 3/4 20mm

7g 4mm 7/8 22mm

8g 4mm 1 25mm

10g 5mm 1 1/4 30mm

12g 5.5mm 1 1/2 40mm

14g 6mm 1 3/4 45mm

2 50mm

2 1/4 55mm

2 1/2 60mm

2 3/4 70mm

3 75mm

3 1/2 90mm

4 100mm

gauge length

timber brick concrete blockwall & floor

boardsplasterboard

metal stud work

metalsheet

PVCuwindow section

some corrosion resistance

European Technical Approval

Option 1 for cracked concrete

F120fire rated

Heco Bianditz Sharpware Mungo

sustainablewear safety

gloveswear safety

goggles

wear safety ear

defenders

R

HECOSCHRAUBEN

bianditz

philips t-drive posi slotted pan head

hex drive XR2

Symbol Key

Recess Key

. .34

Notes

. .35

Notes

Profast Ltd

Unit 10/11, Western Industrial Estate, Naas Road, DUBLIN 12

Tel: 00 353 1 456 6666Fax: 00 353 1 4500198 Email : [email protected]

www.profast.ie

Profast brochure edition 1

fixings / screw brochure

Documents