self-drilling screw fixings - index fixing systems · self-drilling screw fixings denomination:...

TECHNICAL DATA SHEET

SELF-DRILLING SCREW FIXINGS

Denomination: SELF-DRILLING SCREW FIXINGS Codes: ABE, ABEI, ARE, ABR, ABRBLE, NBR, ABRC, ABRCA2, ABRA2, ABA, FS, ABP, NBP, ABPC, ABPCA2, TAEZ, TAEN, BCPZ, BZPZBL, BCPN, BCPB, BCPA2, BIE, AUTO, BAUTO, RS.

Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 1 of 23

ABE ABEI ARE

AUTO BIE (ver FT BIE) BAUTO (ver FT BIE)

ABR ABR__BLE NBR

ABRA2 ABRC ABRCA2

ABPC ABPCA2 ABP

NBP BCPZ BCPB

BCPN BCPA2 BCPZ__BL

RSZ TAEZ TAEN

ABA FS





CHARACTERISTICS APPLICATIONS

Drill point: drill material directly – no need for pre-drilled hole.

Self-tapping thread.

Wide variety of head types, diameters and lengths for different applications: flexibility in installation.

Available in zinc plated, black zinc-plated, white zinc-plated and silver ruspert coatings.

Versions in standard commercial lacquered plate colours (RAL colour scheme).

Coloured caps available for hexagonal heads.

For joining metal to wood, joining metallic elements, or plastic, wood or other materials on metallic materials.

Versions with galvanized steel-EPDM or stainless steel-EPDM washer for sealed joints in façades and roofing, in different diameters.

BASE MATERIALS

APPLICATION EXAMPLES





SELECTION TABLE

Code Regulation Head Socket ø EPDM

washer (1) Material/Coating (2)

Material to be fixed

ABE

DIN 7504K Hexagonal with

washer --- 14, 16, 18, 25 Steel / Zinc-plated Steel

ABEI


washer --- --- Stainless Steel Aluminum

BIE


washer --- 16 A2 / Silver ruspert

Steel and Stainless Steel

ARE

--- Hexagonal with

washer --- 16, 18, 25 Steel / Zinc-plated Steel

AUTO

--- Hexagonal with

washer --- 16 Steel / Zinc-plated Steel

BAUTO

--- Hexagonal with

washer --- 16 A2 / Silver ruspert

Steel and Stainless Steel

ABR

DIN 7504N Round head Ph --- Steel / Zinc-plated Steel

NBR

DIN 7504N Round head Ph --- Steel / Black zinc-plated Steel

ABR__BLE

DIN 7504N Round head Ph --- Steel / Zinc-plated + paint Steel

ABRA2

DIN 7504N Round head Ph --- Stainless Steel Aluminium

ABRC

DIN 7504N Round head Square --- Steel / Zinc-plated Steel

ABRCA2

DIN 7504N Round head Square --- Stainless Steel Aluminium

ABA

--- Countersunk Ph --- Steel / Zinc-plated Wood + Steel

FS

--- Hexagonal with

washer --- 14 Steel / Zinc-plated Steel + Wood

ABP

DIN 7504P Countersunk Ph --- Steel / Zinc-plated Steel

NBP

DIN 7504P Countersunk Ph --- Steel / Black zinc-plated Steel

ABPC

DIN 7504P Countersunk Square --- Steel / Zinc-plated Steel

TAEZ

--- Flat head Ph --- Steel / Zinc-plated Steel

TAEN

--- Flat head Ph --- Steel / Black zinc-plated Steel

BCPZ

--- Extra-flat bevelled

Ph --- Steel / Zinc-plated Steel

BCPN


Ph --- Steel / Black zinc-plated Steel

BCPB


Ph --- Steel / Zinc-plated + paint Steel

BCPZ__BL


Ph --- Steel / Zinc-plated + paint Steel

BCPA2


Ph --- Stainless Steel Aluminium

RSZ

--- Flat bevelled Ph --- Steel / Zinc-plated Steel

(1) EPMD washer characteristics according to ARVUL Data Sheet (2) Coatings: Zinc-plated ≥ 3 µm according to ISO 4042 A1J

Black zinc-plated ≥ 3 µm according to ISO 4042 A1N Silver ruspert > 500 hours in saline mist chamber according to ISO 9227





MATERIALS

Characteristic ABE, ARE, AUTO, ABR, ABRBL, NBR,

ABRC, ABA, FS, ABP, NBP, ABPC, TAEZ, TAEN, BCPZ, BCPN, BCPB, RS

ABRA2, ABRCA2, ABPCA2, BCPA2

BIE, BAUTO (silver ruspert coating)

Material Special steel for SAE J403 1022 thermal

treatment A2 Stainless Steel

A2 Stainless Steel head and shaft. Special steel point for SAE J403 1022

thermal treatment

Surface hardness > 500 HV --- Head and shaft ---

Point > 500 HV

Core hardness 240 - 450 HV --- Head and shaft --- Point 240 - 450 HV

Depth hardness ST 2.5 – 3.5: 0.05 – 0.18 mm. ST 3.9 – 5.5: 0.10 – 0.23 mm. ST 6.3: 0.15 – 0.28 mm.

---

Head and shaft --- Point:

ST 4.8 – 5.5: 0.10 – 0.23 mm. ST 6.3: 0.15 – 0.28 mm.

POINT SELECTION

The choice of screw point must be such that the total thickness of materials to be joined (including any intermediate

spaces) is lower than the edge of the drill point; otherwise screw breakage may occur during installation.





INSTALLATION PARAMETERS

Parameter ST 3.5 ST 3.9 ST 4.2 ST 4.8 ST 5.5 M 5.5

ST 6.3

Maximum installation strength

[N] 150 200 250 250 350 350

Dri

ll Sp

eed

Steel [rpm] 1800 - 2500 1000 - 1800

Stainless Steel [rpm] 1000 - 1500 600 - 1000

Maximum time [sg] 4 4.5 5 7 11 13

Maximum torque [Nm] 2.8 3.8 4.7 6.9 10.4 16.9

10 N ≈ 1 Kg 10 Nm ≈ 1Kg m

With high drilling times or excessive drilling speed there is a risk of burning the drill bit and therefore not drilling the material.





MAXIMUM THICKNESS TO BE FIXED

Length ST 3,5 ST 3,9 ST 4,2 ST 4,8 ST 5,5 ST 6,3

9,5 2,85

11 4,2

13 6,2 5,8 4,3 3,7

16 9,2 8,8 7,3 5,5

19 12,1 11,7 10,3 8,7 8,7 7

22 15,1 14,7 13,3 11,7 11,7 10

25 18,1 17,7 16,3 14,7 14,7 13

32 25,1 24,5 23 21,5 21,5 20

38 30,5 29 27,5 27,5 26

45 36 34,5 34,5 33

50 41 39,5 39,5 38

60 49,5 49,5 48

63 52,5 52,5 51

73 62,5 62,5 61

75 64,5 64,5 63

80 69,5 68

90 79,5 78

100 89,5 88

110 98

120 108

130 118

140 128

SCREW RESISTANCE CHARACTERISTICS*

.

1 KN ≈ 100 Kg

For tension loads, the inherent resistance of plates to be fixed must be taken into account, which is usually less than the resistance of the screw itself, as the screw will probably tear the plates.

SIZE TENSION

[kN] SHEAR

[kN]

ST 2.9 2.62 1.31

ST 3.5 3.81 1.91

ST 3.9 4.64 2.32

ST 4.2 5.26 2.63

ST 4.8 7.11 3.56

ST 5.5 9.63 4.82

ST 6.3 13.36 6.68





RECOMMENDED TENSION LOAD IN STEEL PLATE

RECOMMENDED TENSION LOAD IN ALUMINIUM PLATE

SIZE RECOMMENDED LOAD

e[mm] N[kN] e[mm] N[kN] e[mm] N[kN]

ST 3.5 0.8 0.55 1.5 0.89 2.0 1.13

ST 3.9 0.8 0.54 1.5 0.97 2.0 1.50

ST 4.2 2.0 1.63 2.5 1.51 3.0 2.62

ST 4.8 2.0 1.87 3.0 2.77 4.0 3.71

ST 5.5 2.0 1.77 3.5 2.86 5.0 3.43

ST 6.3 2.5 1.44 4.0 3.19 5.0 4.83

SIZE RECOMMENDED LOAD

e[mm] N[kN] e[mm] N[kN] e[mm] N[kN]

ST 4.8 2.0 0.95 3.0 1.52 4.0 2.10





1. ABE Self-drilling screw - hexagonal head with embossed washer

Properties

Steel Zinc-plated coating Available in

different colours

Base material Properties

Plate assembly Plate profile Hexagonal with

embossed washer Hexagonal with

embossed washer Screw point

1.1. Details

Code ST 3.5 ST 4.2 ST 4.8 ST 5.5 ST 6.3

dk: washer head diameter [mm] 8 8.5 10 10.5 12.6

k: head thickness [mm] 3.3 4.1 4.3 4.3 6.3

c: washer thickness [mm] 1.2 1.5 1.6 1.9 2

s: spanner [mm] 6 7 8 8 10

D: exterior thread diameter [mm] 3.53 4.22 4.80 5.46 6.25

d: interior thread diameter [mm] 2.64 3.10 3.58 4.17 4.88

p: thread [mm] 1.3 1.4 1.6 1.8 1.8

l: lengths [mm] 9.5 - 32 13 - 38 13 - 38 19- 75 19 - 240

Installation bit code (hexagonal magnetic bit)

BOCA006 BOCA007 BOCA008 BOCA008 BOCA010

Drill capacity [mm] 0.70 - 2.25 1.75 - 3.00 1.75 - 4.40 1.75 - 5.25 2.50 - 6.00

Zinc-plated finish.

For general plate-plate joints.

Versions with assembled EPMD washer for sealed joints in façades and roofing (consult ARVUL Technical Data Sheet).





2. ABEI Self-drilling screw - hexagonal head with embossed washer Stainless Steel A2

Properties

Stainless Steel A2


Plate assembly Plate profile Aluminium Hexagonal with


embossed washer Reduced screw

point

1.2. Details

Code ST 4.2 ST 4.8 ST 5.5 ST 6.3

dk: washer head diameter [mm] 8.5 10 10.5 12.6

k: head thickness [mm] 4.1 4.3 4.3 6.3

c: washer thickness [mm] 1.5 1.6 1.9 2

s: spanner [mm] 7 8 8 10

D: exterior thread diameter [mm] 4.22 4.80 5.46 6.25

d: interior thread diameter [mm] 3.10 3.58 4.17 4.88

p: thread [mm] 1.4 1.6 1.8 1.8

l: lengths [mm] 13 - 38 13 - 38 19- 75 19 - 25

Installation bit code (hexagonal magnetic bit)

BOCA007 BOCA008 BOCA008 BOCA010

Drill capacity [mm] 1.75 - 3.00 1.75 - 4.40 1.75 - 5.25 2.50 - 6.00

Stainless Steel A2.

For general plate-plate joints made of aluminum.





3. ARE Self-drilling screw with reduced point and 8mm hexagonal head

Properties


different colours


Plate assembly Plate profile Aluminium Hexagonal with



point

2.1. Details

C ST 4.8 ST 5.5 ST 6.3

dk: washer head diameter [mm] 11 11 11

k: head thickness [mm] 4.45 5.45 5.45

c: washer thickness [mm] 1.15 1.25 1.25

s: spanner [mm] 8 8 8

D: exterior thread diameter [mm] 4.80 5.46 6.25

d: interior thread diameter [mm] 3.58 4.17 4.88

p: thread [mm] 1.6 1.8 1.8

l: lengths [mm] 16 - 19 22 20 - 80

Installation bit code (hexagonal magnetic bit) BOCA008 BOCA008 BOCA008

Maximum drill capacity [mm] 0.0 - 1.0 1.0 - 1.5 1.0 - 1.5

Zinc-plated finish.

Low thickness plate-plate joints, up to 1.5 mm. The point performs a prior drill-hole with a smaller diameter. The thread, with a greater diameter, creates an extrusion in the plate, lengthening and strengthening the threaded area.

Drill following the upper part of the rpm range from the table in section 5.

Versions with assembled EPDM washer for sealed joints in façades and roofing (consult ARVUL Technical Data Sheet).





4. AUTO Self-drilling screw for girders - screw point no.5 - hexagonal head

Properties


different colours


Plate assembly Plate profile IPN Hexagonal with


embossed washer Girder screw

point

3.1. Details

Code M 5.5

dk: washer head diameter [mm] 11

k: head thickness [mm] 5.3

c: washer thickness [mm] 1.15

s: spanner [mm] 8

Point #5

D: exterior thread diameter [mm] 5.5

d: interior thread diameter [mm] 4.6

p: thread [mm] 1.06

l: lengths [mm] 32 - 38

Installation bit code (hexagonal magnetic bit) BOCA008

Drill capacity [mm] 4.0 – 12.0

Zinc-plated finish.

For general plate-plate joints for thicknesses up to 12 mm.

Versions with assembled EPDM washer for sealed joints in façades and roofing (consult ARVUL Technical Data Sheet).





5. ABR, NBR, ABR_BLE,

ABRA2 Self-drilling screw - Dome head - Ph socket

Properties Base material

Steel

Available in stainless

Plate assembly

Plate profile

Coatings Properties

Zinc-plated coating

Black zinc-plated White zinc-

plated Available in

different colours Ph Dome head Screw point

4.1. Details

Code ST 3.5 ST 3.9 ST 4.2 ST 4.8 ST 5.5

dk: head diameter [mm] 6.9 7.5 8.2 9.5 10.8


Ph bit nº 2 nº 2 nº 2 nº 2 nº 3

R: head radius [mm] 5.4 5.8 6.2 7.2 8.2



p: thread [mm] 1.3 1.3 1.4 1.6 1.8

l: lengths [mm] 9.5 - 32 13 - 32 13 - 50 13 - 120 19- 73

Installation bit code (Ph bit) PUPHC02 PUPHL02

PUPHC02 PUPHL02

PUPHC02 PUPHL02

PUPHC02 PUPHL02

PUPHC03 PUPHL03

Drill capacity [mm] 0.70 - 2.25 0.70 – 2.40 1.75 – 3.00 1.75 – 4.40 1.75 - 5.25

Zinc-plated (code ABR), white zinc-plated (code ABR_BLE) and black zinc-plated (code NBR) finishes.

A2 stainless steel version (code ABRA2) for use exclusively with aluminium (does not produce corrosion by galvanic coupling). Do not use screw in stainless steel to drill steel, as point will burn out due to lack of hardness.





6. ABRC, ABRCA2 Self-drilling screw – Dome head – square socket

Properties


stainless


Plate assembly Plate profile Aluminium Square socket Dome head Screw point

5.1. Details

Code ST 3.5 ST 3.9 ST 4.2 ST 4.8 ST 5.5

dk: head diameter [mm] 6.9 7.5 8.2 9.5 10.8


Squarebit nº 1 nº 1 nº 2 nº 2 nº 3

R: head radius [mm] 5.4 5.8 6.2 7.2 8.2



p: thread [mm] 1.3 1.3 1.4 1.6 1.8

l: lengths [mm] 9.5 - 32 13 - 38 13 - 50 13 - 100 19- 73

Installation bit code (square bit) PUCUC01 PUCUL01

PUCUC01 PUCUL01

PUCUC02 PUCUL02

PUCUC02 PUCUL02

PUCUC03 PUCUL03

Drill capacity [mm] 0.70 - 2.25 0.70 – 2.40 1.75 – 3.00 1.75 – 4.40 1.75 - 5.25

A2 stainless steel version (code ABRA2) for use exclusively with aluminium (does not produce corrosion by galvanic coupling). Do not use screw in stainless steel to drill steel, as point will burn out due to lack of hardness.

Zinc-plated finish (code ABRC).

Grooves in the lower part of head which guard against rotation.





7. ABA / ATA Self-drilling screw with two-wing screw point – countersunk head – Ph/Tx socket

Properties

Steel Zinc-plated coating Wood - Steel

Properties

Ph / Tx Countersunk head Two-wing screw

point

6.1. Details

CODE ABA ATA

Diameter ST 4.8 ST 5.5 ST 6.3 ST 4.8 ST 5.5 ST 6.3

dk: head diameter [mm] 9.50 10.80 12.40 9.50 10.80 12.40

K: head thickness [mm] 3.15 4.27 4.81 3.15 4.27 4.81

Drill length [mm] 10 12 13 10 12 13

D: outer thread diameter [mm] 4.80 5.46 6.25 4.80 5.46 6.25

d: inner thread diameter [mm] 3.58 4.17 4.88 3.58 4.17 4.88

p: pitch [mm] 1.6 1.8 1.8 1.6 1.8 1.8

l: screw length [mm] 32 - 50 38 - 65 60 - 85 32 - 50 38 - 65 50 - 100

Installation bit code (Ph) PUPHC02 / PUPHL02 PUTO025 PUTO025 PUTO030

Recess PH2 PH2 PH2 T25 T25 T30

Drill capacity [mm] 1.75 - 4.00 1.75 - 5.00 2.50 - 6.00 1.75 - 4.00 1.75 - 5.00 2.50 - 6.00





Zinc-plated finish.

For joining wood (thickness > 12 mm) and plates (> 1.75 mm). The two wings at the point perform a pre-drill hole in the wood to prevent the thread from dulling and the wood from cracking in the area of the drill hole.

Grooves in the lower part of head which directly countersink wood, melamine and other materials, at the same time as guarding against rotation.

For wood – metal fixings when wood thickness is greater than 12 mm a hole is required in the wood with a space which prevents the starting of threading in the wood before finishing drilling the metal. Otherwise the screw point may burn out, the wood may break or, in some cases, there may be ungluing of the wood – metal joint. To avoid this, one of the following options must be taken:

Pre-drill the wood, with a drillhole of a greater diameter than the thread.

Use an extra-long screw point (not usually sold)

Use a two-wing point screw: a bore is produced in the wood with a greater diameter than that of the thread, so that this does not come into contact with the wood. The wings will break when they come into contact with the metal and the edge threads in it. Fixing with wood thickness ≤ 12 mm Fixing with wood thickness > 12 mm with conventional point screw

Solution 1: extra-long point screw Solution 2: Two-wing point screw. a) drilling of wood b) wood boring + metal boring c) threading in metal





8. FS Metal-wood roofing screw

Properties


different colours


Metal plate - Wood Hexagonal with



point

7.1. Details

Code ST 4.8 dk: washer head diameter [mm] 10


c: washer thickness [mm] 1.1

s: spanner [mm] 8



p: thread [mm] 2.1

l: lengths [mm] 19 – 35

lG: maximum thread length [mm] Complete

Installation bit code (hexagonal magnetic bit) BOCA008

Drill capacity [mm] 1.50 max

Zinc-plated finish with lacquered head and washer.

For use in metal-wood fixings.





9. ABP, NBP Self-drilling screw – countersunk head – Ph socket

Properties

Steel Zinc-plated coating Black zinc-plated


Plate assembly Metal profile Ph Countersunk head Screw point

8.1. Details

Code ST 3.5 ST 3.9 ST 4.2 ST 4.8 ST 5.5

dk: head diameter ≤ [mm] 6.8 7.5 8.1 9.5 10.8


Ph bit nº 2 nº 2 nº 2 nº 2 nº 3

Head countersink angle º 80 80 80 80 80



p: thread [mm] 1.3 1.3 1.4 1.6 1.8

L: lengths [mm] 9.5 - 25 13 - 38 13 - 38 13 - 50 19 - 50

Installation bit code (Ph) PUPHC02 PUPHL02

PUPHC02 PUPHL02

PUPHC02 PUPHL02

PUPHC02 PUPHL02

PUPHC03 PUPHL03


Zinc-plated (code ABP) or black-zinc-plated (code NBP) finish.

For metal-metal fixings where the screw is required to be level with the material to be fixed. Requires prior countersinking.





10. ABPC Self-drilling screw – countersunk head – square socket

Properties


stainless


Plate assembly Plate profile Square socket Countersunk head Screw point

9.1. Details

Code ST 3.5 ST 3.9 ST 4.2 ST 4.8 ST 5.5

dk: head diameter ≤ [mm] 6.8 7.5 8.1 9.5 10.8


Square bit nº 1 nº 1 nº 2 nº 2 nº 3

Head countersink angle º 80 80 80 80 80



p: thread [mm] 1.3 1.3 1.4 1.6 1.8

L: lengths [mm] 13 - 25 19 - 38 16 - 38 13 - 50 19 - 50

Installation bit code (Square drill)

PUCUC01 PUCUL01

PUCUC01 PUCUL01

PUCUC02 PUCUL02

PUCUC02 PUCUL02

PUCUC03 PUCUL03


Zinc-plated finish (code ABPC) and A2 Stainless steel version (code ABPCA2) for use exclusively with aluminium (does not produce corrosion by galvanic coupling). Do not use screw in stainless steel to drill steel, as point will burn out due to lack of hardness.

For metal-metal fixings where the screw is required to be level with the material to be fixed.

Requires prior countersinking.

With 4 grooves in the lower part of head which directly countersink wood, melamine and other materials, at the same time as guarding against rotation.





11. TAEZ, TAEN Self-drilling screw – low dome head – Ph socket with embossed washer

Properties

Steel Zinc-plated coating Black zinc-plated


Metal plate assembly Plate profile Ph Low dome head Screw point

10.1. Details

Code ST 4.2

dk: head diameter ≤ [mm] 11.17

Head thickness ≤ [mm] 2.55

Ph bit nº 2

k: point length 4.4 – 5.2



p: thread [mm] 1.4



Drill capacity [mm] 0.75 - 2.50

Zinc-plated (code TAEZ) or black zinc-plated (code TAEN) finish.

For use in fixings where an even distribution of pressure is required, without the need for assembling additional flat washers, and without the head protruding excessively:

o For fixing soft materials on metal (methacrylate, plastic, chipboard, thin metallic plates, etc). o Large or oversized holes.





12. BCPZ, BCPN, BCPB,

BCPZ_BL, BCPA2 Self-drilling screw – extra-flat head – Ph socket

Properties Base material

Steel Available in

stainless Metal plate assembly

Plate profile

Coatings Properties

Zinc-plated coating

Black zinc-plated White zinc-

plated White head only

BCPZ__BL Ph Extra-flat head Screw point

11.1. Details

Code ST 4.2

dk: head diameter [mm] 8.0


Ph bit nº 2

Point length [mm] 4



p: thread [mm] 1.4


Head countersink angle º 65


Drill capacity [mm] 0.7 - 2.0

Zinc-plated (code BCPZ), black zinc-plated (code BCPN) or completely white painted RAL 9010 (code BCPB) finishes.

Bevelled head to prevent snagging on sliding parts.

For joints on metal which require a low head (sliding doors and windows, inlaid locks, etc.).

May be used as a substitute for rivets in many applications, with the advantage of being removable.

Reduced cone under head to improve finish on flat surfaces.

A2 Stainless steel version (code BCPA2) for use exclusively with aluminium (does not produce corrosion by galvanic coupling). Do not use screw in stainless steel to drill steel, as point will burn out due to lack of hardness.





13. RS Self-drilling screw - rivet head

Properties

Steel Zinc-plated coating


Metal plate assembly Plate profile Aluminium Ph Extra-flat head Screw point

12.1. Details

CODE ST 3.5 ST 4.2 ST 4.8

dk: head diameter [mm] 6.7 8 9.3

k: head thickness [mm] 1.2 1.3 1.5

d: exterior thread diameter [mm] 3.5 4.2 4.8

p: thread [mm] 1.3 1.4 1.6

l: lengths [mm] 9 - 16 13 - 32 13 - 38

Ph bit nº 2 nº 2 nº 2


PUPHC02 PUPHL02

PUPHC02 PUPHL02

Drill capacity [mm] 0.7 – 2.25 1.75 – 3.00 1.75 – 4.40

Self-drilling screw with reduced head height.

This reduced head height gives it special characteristics: o Avoids interference with moving elements. o Aesthetic finish as screw is rounded and is concealed once installed. o May be used as a substitute for rivets. o Wide range of thicknesses to be drilled - from 0.70 mm to 4.40 mm. o Wide range of measurements. o Cone between thread and head to ensure piece sits perfectly. o Complete thread. o Annular groove at the bottom of the head which allows the material originated in the drilling process to

stay in this area, allowing the screw to sit better.





Drilling process, breaking shavings Perfect piece finish

Different views of the screw:





COLOURS

All self-drilling screws may be supplied painted in the following options (RAL colour scheme codes):

Head only or head and EPDM washer o White RAL 9010 o Pyrenean white RAL 9002 o Oyster white RAL 9018 o Bidasoa cream RAL 1000 o Sand RAL 1001 o Ivory RAL 1015 o Copper RAL 1007 o Tile red RAL 3011 o Coral red RAL 3003 o Burgundy RAL 3005 o Blue RAL 5009 o Lake blue RAL 5019 o Navarre green RAL 6028 o Light green RAL 6021 o Moss green RAL 6005 o Metallic grey RAL 9006 o Grey RAL 7035 o Black RAL 9005

Measurements: from 3.9x13 to 6.3x140. Consult Sales Department for minimum quantity, price and delivery time. Farmer Screw (FS) Colours:

o Tile red RAL 3009 o Dark blue RAL 5010 o Olive green RAL 6005 o Light brown RAL 8004 o Dark brown RAL 8017 o Grey RAL 9006 o White RAL 9010 o Black RAL 9011

Fully painted o White RAL 9010 o Black RAL 9005 o Burgundy RAL 3005 o Moss green RAL 6005 o Blue RAL 5009

Measurements: from 2.9x6.5 to 5.5x 32. Minimum quantity: 15 kg Consult Sales Department for price and delivery time.

ATAP Codes: decorative plastic caps for 8 mm (ABE 4.8, ABE 5.5 and ARE) and 10 mm (ABE 6.3) hexagonal head screws. o Pyrenean white RAL 9002 o Oyster white RAL 9018 o Sand RAL 1001 o Tile red RAL 3011 o Coral red RAL 3003 o Navarre green RAL 6028 o Black RAL 9005

self-drilling screw fixings - index fixing systems · self-drilling screw fixings denomination:...

Documents