france: pm-metalit metalit emitec france s.a.s … no. 275 & 282 (part) village maan, taluka...
TRANSCRIPT
Dimensions, structures, materials
Extract from the list of manufacturable metalsubstrate designs
PM-METALIT®
200 cpsi fleececorrugated
layer
Cell density
Standardmatrix length
[ mm ]300 65
Foil thickness [ µm ]
PM-METALIT® Structure
123 mm147 mm171 mm195 mm219 mm
Matrix Frontal area Typ. mantle wall thickness Outer
Ø [mm] Ø [mm][cm2] 1 mm 1,5 mm 2 mm
PM-METALIT® Round Shape
174,6 178,6239,43 •165 168213,82 •
••••••••••••••••
150 153176,71 •146 149167,42 •143 146160,61 •140,5 143,5155,04 •135 138143,14 •127 130126,68 •118 121109,36 •115 118103,87 •114 117102,07 •110 11395,03 •105 10886,59 •
98,4 101,476,05 •93 9667,93 •90 9363,62 •85 8856,75 •80 8350,27 •79 8249,02 •
70 7338,48 •77 8046,57 •
190 194283,53 •200 204314,16 •213 217356,33 •230 234415,48 •242 246459,96 •254 258506,71 •264 268547,39 •285,8 289,8641,53 •300 304706,86 •321 325809,28 •342 346918,63 •
Matrix Stirnfläche Typ. Wanddicke Mantel Außen
Ø [mm] Ø [mm][cm2] 1 mm 1,5 mm 2 mm
METALIT® Runde Form Teil 2
362
400
425
450
3661029,22 •4041256,64 •4291418,63 •4541590,44 •
362 3661029,22 •400 4041256,64 •450 4541590,44 •
377 3811116,28 •
Matrix
(OV)(RT)
Frontal areaMantle wallthickness
[cm2]A x B [mm] [mm]
120 x 60169,7 x 80,8
61,40118,7
1,51,5
PM-METALIT® Oval Shape (OV)/Racetrack (RT)
Matrix Frontal areaMantle wallthickness
[cm2]A x B [mm] [mm]
135,7 x 71139 x 82147 x 77,7150 x 95
177,8 x 114,3
79,289,2893,32
111,65161,05
1,51,51,51,51,5
PM-METALIT® Elliptical Shape
Emitec standard diameter programme.
Status: October 2013
Germany (headquarters):Emitec Gesellschaft für Emissionstechnologie mbHHauptstraße 128D-53797 LohmarTelephone: +49 2246 109 0Facsimile: +49 2246 109 109
France:Emitec France S.A.SZI de FaulquemontAvenue Jean Monnet57380 FaulquemontTelephone: +33 387819 000Facsimile: +33 387819 195
USA:Emitec Inc.3943 W. Hamlin RoadRochester Hills, Michigan 48309Telephone: +1 248 276 6430Facsimile: +1 248 276 6431
India:Emitec Emission Control TechnologiesIndia Pvt. Ltd.Survey No. 275 & 282 (Part)Village Maan, Taluka MulshiPune 411 057Telephone: +91 20 3911 4800Facsimile: +91 20 3911 4999
China:EMITEC Emission Treatment System (Shanghai) Co.,LtdRoom B, 6th Floor, No. 26 BuildingNo. 1000 Jinhai RoadJinqiao Export Processing ZonePudong 201206 ShanghaiTelephone: +86 21 5055 0567 Facsimile: +86 21 5055 0568
Japan:Emitec Japan K.K.Cedar Shibaura 4 F3-13-16 Shibaura, Minato-kuTokyo 108-0023Telephone: +81 35 418 6066Facsimile: +81 35 418 6080
South Korea:Emitec Korea Inc.Room No. 817/818, Dongmoon Tower-II,358-25, Hosu-Ro, ilsandong-gu Goyang-si, Gyeonggi-do, 410-704Telephone: +82 31 902 9490Facsimile: +82 31 902 9493
Our latest publications and leaflets as well as further information on Emitec can be found onwww.emitec.com
EMICAT®
Other dimensions on request.
1.4509
1.48281.4607
1.4301
AISI 409 (similar to 1.4512)AISI 439 (similar to 1.4509)
Typical Mantle Materials
Matrix Frontal area Typ. mantle wall thickness Outer
Ø [mm] Ø [mm][cm2] 1 mm 1,5 mm 2 mm
METALIT® Round Shape
174,6 178,6239,43 •165 168213,82 •
••••••••••••••••
150 153176,71 •146 149167,42 •143 146160,61 •140,5 143,5155,04 •135 138143,14 •127 130126,68 •118 121109,36 •115 118103,87 •114 117102,07 •110 11395,03 •105 10886,59 •
98,4 101,476,05 •93 9667,93 •90 9363,62 •85 8856,75 •80 8350,27 •79 8249,02 •
70 7338,48 •77 8046,57 •
69 7237,39 •65 6833,18 •60,5 63,528,75 •60 6228,27 •50,6 52,620,11 •50 5219,63 •
40 4212,57 •43 4514,52 •
35 379,62 •33 358,55 •30 327,07 •
190 194283,53 •200 204314,16 •213 217356,33 •230 234415,48 •242 246459,96 •254 258506,71 •264 268547,39 •285,8 289,8641,53 •300 304706,86 •321 325809,28 •342 346918,63 •
Matrix Stirnfläche Typ. Wanddicke Mantel Außen
Ø [mm] Ø [mm][cm2] 1 mm 1,5 mm 2 mm
METALIT Runde Form Teil 2
362
400
425
450
3661029,22 •4041256,64 •4291418,63 •4541590,44 •
362 3661029,22 •
400 4041256,64 •450 4541590,44 •605,6 6102880,46 •
377 3811116,28 •
Matrix Frontal areaMantle wallthickness
[cm2]A x B [mm] [mm]
139 x 82 89,28 1,5
135,7 x 71 79,2 1,5
147 x 77,7 93,3 1,5
150 x 95 111,65 1,5167 x 102 136,51 1,5
177,8 x 114,3 161,05 1,5235 x 135 260,5 2
METALIT® Elliptical Shape
Matrix
(OV)
(OV)(OV)(RT)
(RT)(RT)(RT)(RT)
Frontal areaMantle wallthickness
[cm2]A x B [mm] [mm]
120 x 60 61,40 1,5(OV) 98,5 x 86 68,83 1,5
76,5 x 50 32,88 1,5
130 x 60 70,3 1,5130 x 80 85,28 1,5
161,7 x 72,8 102,2 1,5169,7 x 80,8 118,7 1,5
188 x 137,6 221,93 1,5215,4 x 108,4 200,1 2
METALIT® Oval Shape (OV) / Racetrack (RT)
290 x 290 771,47 2,0
Square METALIT®
Matrix Frontal areaMantle wallthickness
[cm2]A x B [mm] [mm]
Position and depth of sensor hole on request.
Sensor METALIT®
114,4 102,78 1,5
124 120,76 1,5
Matrix Frontal areaMantle wallthickness
[cm2]ø [mm] [mm]
230 / 104 330,5 1,5 / 1,0
285,8 / 130 508,8 1,5 / 1,0
Ring METALIT®
Matrix Frontal areaMantle wallthickness
[cm2]Da / Di [mm] [mm]
Emitec standard diameter programme.
ConstructionsProtrusionsFlangesSwagesIndentsMachine-readable codesand many more
Typical Mantle Designs To Support Canning
Emitec is certified to:DIN EN ISO 14001:2005ISO TS 16949:2002
Quality Monitoring
Tools available: 2 - 4 weeksNew tool (round): 4 - 6 weeksNew tool (not round): 5 - 8 weeks
Typical Delivery Times For Prototypes:
50,8 mm74,5 mm90 mm
101,5 mm110 mm120 mm
150 mm130 mm
174 mm
• • •• • • •
•• • •• •• •
100 cpsi200 cpsi300 cpsi400 cpsi500 cpsi
Cell density
Standardmatrix lengths
[ mm ]
TS-Design®
Turbulente Struktur
110 80 65 50 40Foil thickness [ um ]
200 mm225 mm250 mm270 mm
Additional on request!
****
50 cpsi 25 mm50,8 mm60 mm74,5 mm90 mm
101,5 mm110 mm120 mm
150 mm130 mm
174 mm
• • •• • • •• • • • •
• • • •• • • • •
••
•••
••
••
• •••
•
••
•
100 cpsi200 cpsi300 cpsi400 cpsi500 cpsi600 cpsi800 cpsi900 cpsi
1000 cpsi1200 cpsi1600 cpsi
Cell density
Standard matrix lengths[ mm ]
Standard-Design
110 80 65 50 40 30 25Foil thickness [ um ]
200 mm225 mm250 mm270 mm
Additional on request!
****
74,5 mm
50,8 mm60 mm
90 mm101,5 mm110 mm120 mm130 mm150 mm174 mm
• • •• • •• • • •• • • •
• • •• •
••
100 cpsi200 cpsi300 cpsi400 cpsi500 cpsi600 cpsi800 cpsi900 cpsi
Standardmatrix lengths
[ mm ]
PE-Design®
80 65 50 40Foil thickness [ um ]
Cell density
200 mm225 mm250 mm270 mm
Additional on request!
****
100/200 cpsi
400/800 cpsi300/600 cpsi200/400 cpsi
50,8 mm74,5 mm90 mm
101,5 mm110 mm120 mm130 mm150 mm174 mm
• • •• ••• •• •
•
Cell density
Standardmatrix lengths
[ mm ]
LS-Design®
80 65 50 40Foil thickness [ um ]
200 mm225 mm250 mm270 mm
Additional on request!
****
Standard Design
Turbulent Structure
* In preparation
* In preparation
* In preparation
* In preparation
Heating elements
Matrix Ø [mm] Frontal area [cm²]
50 19,6360 28,2770 38,48
80 50,2790 63,6298,4 76,05
105 86,59118 109,36
143 160,61127 126,68
150 176,71
165 213,82
174,6 239,43
190 283,53
213 356,33
230 415,48254 506,71
264 547,39
Electrically Heated Catalyst METALIT® Round Shape
Elliptical shapes on request.
Heating power depending on the resistance (0,03 - 0,3 Ohm) and voltage (12/24V) on request. Power feeding via one terminal (ground on housing) or two terminals possible. Other sizes and geometrical forms on request.
Support catalyst matrix in LS and PE design available on request!
1.4509
1.48281.4607
Typical Mantel Materials
• ••
••
••
••
400 cpsi500 cpsi
• • •600 cpsi
50,8 mm 60 mm 63,5 mm
130 mm
174 mm
74,5 mm 90 mm101,5 mm110 mm120 mm
150 mm
Cell density
Standardmatrix lengths
[ mm ]80 65 50 40 30
Foil thickness [ um ]
EMICAT®
Support Catalyst
Emitec standard diameter programme.
EMICAT®
Other dimensions on request.
1.4509
1.48281.4607
1.4301
AISI 409 (similar to 1.4512)AISI 439 (similar to 1.4509)
Typical Mantle Materials
Matrix Frontal area Typ. mantle wall thickness Outer
Ø [mm] Ø [mm][cm2] 1 mm 1,5 mm 2 mm
METALIT® Round Shape
174,6 178,6239,43 •165 168213,82 •
••••••••••••••••
150 153176,71 •146 149167,42 •143 146160,61 •140,5 143,5155,04 •135 138143,14 •127 130126,68 •118 121109,36 •115 118103,87 •114 117102,07 •110 11395,03 •105 10886,59 •
98,4 101,476,05 •93 9667,93 •90 9363,62 •85 8856,75 •80 8350,27 •79 8249,02 •
70 7338,48 •77 8046,57 •
69 7237,39 •65 6833,18 •60,5 63,528,75 •60 6228,27 •50,6 52,620,11 •50 5219,63 •
40 4212,57 •43 4514,52 •
35 379,62 •33 358,55 •30 327,07 •
190 194283,53 •200 204314,16 •213 217356,33 •230 234415,48 •242 246459,96 •254 258506,71 •264 268547,39 •285,8 289,8641,53 •300 304706,86 •321 325809,28 •342 346918,63 •
Matrix Stirnfläche Typ. Wanddicke Mantel Außen
Ø [mm] Ø [mm][cm2] 1 mm 1,5 mm 2 mm
METALIT Runde Form Teil 2
362
400
425
450
3661029,22 •4041256,64 •4291418,63 •4541590,44 •
362 3661029,22 •
400 4041256,64 •450 4541590,44 •605,6 6102880,46 •
377 3811116,28 •
Matrix Frontal areaMantle wallthickness
[cm2]A x B [mm] [mm]
139 x 82 89,28 1,5
135,7 x 71 79,2 1,5
147 x 77,7 93,3 1,5
150 x 95 111,65 1,5167 x 102 136,51 1,5
177,8 x 114,3 161,05 1,5235 x 135 260,5 2
METALIT® Elliptical Shape
Matrix
(OV)
(OV)(OV)(RT)
(RT)(RT)(RT)(RT)
Frontal areaMantle wallthickness
[cm2]A x B [mm] [mm]
120 x 60 61,40 1,5(OV) 98,5 x 86 68,83 1,5
76,5 x 50 32,88 1,5
130 x 60 70,3 1,5130 x 80 85,28 1,5
161,7 x 72,8 102,2 1,5169,7 x 80,8 118,7 1,5
188 x 137,6 221,93 1,5215,4 x 108,4 200,1 2
METALIT® Oval Shape (OV) / Racetrack (RT)
290 x 290 771,47 2,0
Square METALIT®
Matrix Frontal areaMantle wallthickness
[cm2]A x B [mm] [mm]
Position and depth of sensor hole on request.
Sensor METALIT®
114,4 102,78 1,5
124 120,76 1,5
Matrix Frontal areaMantle wallthickness
[cm2]ø [mm] [mm]
230 / 104 330,5 1,5 / 1,0
285,8 / 130 508,8 1,5 / 1,0
Ring METALIT®
Matrix Frontal areaMantle wallthickness
[cm2]Da / Di [mm] [mm]
Emitec standard diameter programme.
ConstructionsProtrusionsFlangesSwagesIndentsMachine-readable codesand many more
Typical Mantle Designs To Support Canning
Emitec is certified to:DIN EN ISO 14001:2005ISO TS 16949:2002
Quality Monitoring
Tools available: 2 - 4 weeksNew tool (round): 4 - 6 weeksNew tool (not round): 5 - 8 weeks
Typical Delivery Times For Prototypes:
50,8 mm74,5 mm90 mm
101,5 mm110 mm120 mm
150 mm130 mm
174 mm
• • •• • • •
•• • •• •• •
100 cpsi200 cpsi300 cpsi400 cpsi500 cpsi
Cell density
Standardmatrix lengths
[ mm ]
TS-Design®
Turbulente Struktur
110 80 65 50 40Foil thickness [ um ]
200 mm225 mm250 mm270 mm
Additional on request!
****
50 cpsi 25 mm50,8 mm60 mm74,5 mm90 mm
101,5 mm110 mm120 mm
150 mm130 mm
174 mm
• • •• • • •• • • • •
• • • •• • • • •
••
•••
••
••
• •••
•
••
•
100 cpsi200 cpsi300 cpsi400 cpsi500 cpsi600 cpsi800 cpsi900 cpsi
1000 cpsi1200 cpsi1600 cpsi
Cell density
Standard matrix lengths[ mm ]
Standard-Design
110 80 65 50 40 30 25Foil thickness [ um ]
200 mm225 mm250 mm270 mm
Additional on request!
****
74,5 mm
50,8 mm60 mm
90 mm101,5 mm110 mm120 mm130 mm150 mm174 mm
• • •• • •• • • •• • • •
• • •• •
••
100 cpsi200 cpsi300 cpsi400 cpsi500 cpsi600 cpsi800 cpsi900 cpsi
Standardmatrix lengths
[ mm ]
PE-Design®
80 65 50 40Foil thickness [ um ]
Cell density
200 mm225 mm250 mm270 mm
Additional on request!
****
100/200 cpsi
400/800 cpsi300/600 cpsi200/400 cpsi
50,8 mm74,5 mm90 mm
101,5 mm110 mm120 mm130 mm150 mm174 mm
• • •• ••• •• •
•
Cell density
Standardmatrix lengths
[ mm ]
LS-Design®
80 65 50 40Foil thickness [ um ]
200 mm225 mm250 mm270 mm
Additional on request!
****
Standard Design
Turbulent Structure
* In preparation
* In preparation
* In preparation
* In preparation
Heating elements
Matrix Ø [mm] Frontal area [cm²]
50 19,6360 28,2770 38,48
80 50,2790 63,6298,4 76,05
105 86,59118 109,36
143 160,61127 126,68
150 176,71
165 213,82
174,6 239,43
190 283,53
213 356,33
230 415,48254 506,71
264 547,39
Electrically Heated Catalyst METALIT® Round Shape
Elliptical shapes on request.
Heating power depending on the resistance (0,03 - 0,3 Ohm) and voltage (12/24V) on request. Power feeding via one terminal (ground on housing) or two terminals possible. Other sizes and geometrical forms on request.
Support catalyst matrix in LS and PE design available on request!
1.4509
1.48281.4607
Typical Mantel Materials
• ••
••
••
••
400 cpsi500 cpsi
• • •600 cpsi
50,8 mm 60 mm 63,5 mm
130 mm
174 mm
74,5 mm 90 mm101,5 mm110 mm120 mm
150 mm
Cell density
Standardmatrix lengths
[ mm ]80 65 50 40 30
Foil thickness [ um ]
EMICAT®
Support Catalyst
Emitec standard diameter programme.
EMICAT®
Other dimensions on request.
1.4509
1.48281.4607
1.4301
AISI 409 (similar to 1.4512)AISI 439 (similar to 1.4509)
Typical Mantle Materials
Matrix Frontal area Typ. mantle wall thickness Outer
Ø [mm] Ø [mm][cm2] 1 mm 1,5 mm 2 mm
METALIT® Round Shape
174,6 178,6239,43 •165 168213,82 •
••••••••••••••••
150 153176,71 •146 149167,42 •143 146160,61 •140,5 143,5155,04 •135 138143,14 •127 130126,68 •118 121109,36 •115 118103,87 •114 117102,07 •110 11395,03 •105 10886,59 •
98,4 101,476,05 •93 9667,93 •90 9363,62 •85 8856,75 •80 8350,27 •79 8249,02 •
70 7338,48 •77 8046,57 •
69 7237,39 •65 6833,18 •60,5 63,528,75 •60 6228,27 •50,6 52,620,11 •50 5219,63 •
40 4212,57 •43 4514,52 •
35 379,62 •33 358,55 •30 327,07 •
190 194283,53 •200 204314,16 •213 217356,33 •230 234415,48 •242 246459,96 •254 258506,71 •264 268547,39 •285,8 289,8641,53 •300 304706,86 •321 325809,28 •342 346918,63 •
Matrix Stirnfläche Typ. Wanddicke Mantel Außen
Ø [mm] Ø [mm][cm2] 1 mm 1,5 mm 2 mm
METALIT Runde Form Teil 2
362
400
425
450
3661029,22 •4041256,64 •4291418,63 •4541590,44 •
362 3661029,22 •
400 4041256,64 •450 4541590,44 •605,6 6102880,46 •
377 3811116,28 •
Matrix Frontal areaMantle wallthickness
[cm2]A x B [mm] [mm]
139 x 82 89,28 1,5
135,7 x 71 79,2 1,5
147 x 77,7 93,3 1,5
150 x 95 111,65 1,5167 x 102 136,51 1,5
177,8 x 114,3 161,05 1,5235 x 135 260,5 2
METALIT® Elliptical Shape
Matrix
(OV)
(OV)(OV)(RT)
(RT)(RT)(RT)(RT)
Frontal areaMantle wallthickness
[cm2]A x B [mm] [mm]
120 x 60 61,40 1,5(OV) 98,5 x 86 68,83 1,5
76,5 x 50 32,88 1,5
130 x 60 70,3 1,5130 x 80 85,28 1,5
161,7 x 72,8 102,2 1,5169,7 x 80,8 118,7 1,5
188 x 137,6 221,93 1,5215,4 x 108,4 200,1 2
METALIT® Oval Shape (OV) / Racetrack (RT)
290 x 290 771,47 2,0
Square METALIT®
Matrix Frontal areaMantle wallthickness
[cm2]A x B [mm] [mm]
Position and depth of sensor hole on request.
Sensor METALIT®
114,4 102,78 1,5
124 120,76 1,5
Matrix Frontal areaMantle wallthickness
[cm2]ø [mm] [mm]
230 / 104 330,5 1,5 / 1,0
285,8 / 130 508,8 1,5 / 1,0
Ring METALIT®
Matrix Frontal areaMantle wallthickness
[cm2]Da / Di [mm] [mm]
Emitec standard diameter programme.
ConstructionsProtrusionsFlangesSwagesIndentsMachine-readable codesand many more
Typical Mantle Designs To Support Canning
Emitec is certified to:DIN EN ISO 14001:2005ISO TS 16949:2002
Quality Monitoring
Tools available: 2 - 4 weeksNew tool (round): 4 - 6 weeksNew tool (not round): 5 - 8 weeks
Typical Delivery Times For Prototypes:
50,8 mm74,5 mm90 mm
101,5 mm110 mm120 mm
150 mm130 mm
174 mm
• • •• • • •
•• • •• •• •
100 cpsi200 cpsi300 cpsi400 cpsi500 cpsi
Cell density
Standardmatrix lengths
[ mm ]
TS-Design®
Turbulente Struktur
110 80 65 50 40Foil thickness [ um ]
200 mm225 mm250 mm270 mm
Additional on request!
****
50 cpsi 25 mm50,8 mm60 mm74,5 mm90 mm
101,5 mm110 mm120 mm
150 mm130 mm
174 mm
• • •• • • •• • • • •
• • • •• • • • •
••
•••
••
••
• •••
•
••
•
100 cpsi200 cpsi300 cpsi400 cpsi500 cpsi600 cpsi800 cpsi900 cpsi
1000 cpsi1200 cpsi1600 cpsi
Cell density
Standard matrix lengths[ mm ]
Standard-Design
110 80 65 50 40 30 25Foil thickness [ um ]
200 mm225 mm250 mm270 mm
Additional on request!
****
74,5 mm
50,8 mm60 mm
90 mm101,5 mm110 mm120 mm130 mm150 mm174 mm
• • •• • •• • • •• • • •
• • •• •
••
100 cpsi200 cpsi300 cpsi400 cpsi500 cpsi600 cpsi800 cpsi900 cpsi
Standardmatrix lengths
[ mm ]
PE-Design®
80 65 50 40Foil thickness [ um ]
Cell density
200 mm225 mm250 mm270 mm
Additional on request!
****
100/200 cpsi
400/800 cpsi300/600 cpsi200/400 cpsi
50,8 mm74,5 mm90 mm
101,5 mm110 mm120 mm130 mm150 mm174 mm
• • •• ••• •• •
•
Cell density
Standardmatrix lengths
[ mm ]
LS-Design®
80 65 50 40Foil thickness [ um ]
200 mm225 mm250 mm270 mm
Additional on request!
****
Standard Design
Turbulent Structure
* In preparation
* In preparation
* In preparation
* In preparation
Heating elements
Matrix Ø [mm] Frontal area [cm²]
50 19,6360 28,2770 38,48
80 50,2790 63,6298,4 76,05
105 86,59118 109,36
143 160,61127 126,68
150 176,71
165 213,82
174,6 239,43
190 283,53
213 356,33
230 415,48254 506,71
264 547,39
Electrically Heated Catalyst METALIT® Round Shape
Elliptical shapes on request.
Heating power depending on the resistance (0,03 - 0,3 Ohm) and voltage (12/24V) on request. Power feeding via one terminal (ground on housing) or two terminals possible. Other sizes and geometrical forms on request.
Support catalyst matrix in LS and PE design available on request!
1.4509
1.48281.4607
Typical Mantel Materials
• ••
••
••
••
400 cpsi500 cpsi
• • •600 cpsi
50,8 mm 60 mm 63,5 mm
130 mm
174 mm
74,5 mm 90 mm101,5 mm110 mm120 mm
150 mm
Cell density
Standardmatrix lengths
[ mm ]80 65 50 40 30
Foil thickness [ um ]
EMICAT®
Support Catalyst
Emitec standard diameter programme.
Dimensions, structures, materials
Extract from the list of manufacturable metalsubstrate designs
PM-METALIT®
200 cpsi fleececorrugated
layer
Cell density
Standardmatrix length
[ mm ]300 65
Foil thickness [ µm ]
PM-METALIT® Structure
123 mm147 mm171 mm195 mm219 mm
Matrix Frontal area Typ. mantle wall thickness Outer
Ø [mm] Ø [mm][cm2] 1 mm 1,5 mm 2 mm
PM-METALIT® Round Shape
174,6 178,6239,43 •165 168213,82 •
••••••••••••••••
150 153176,71 •146 149167,42 •143 146160,61 •140,5 143,5155,04 •135 138143,14 •127 130126,68 •118 121109,36 •115 118103,87 •114 117102,07 •110 11395,03 •105 10886,59 •
98,4 101,476,05 •93 9667,93 •90 9363,62 •85 8856,75 •80 8350,27 •79 8249,02 •
70 7338,48 •77 8046,57 •
190 194283,53 •200 204314,16 •213 217356,33 •230 234415,48 •242 246459,96 •254 258506,71 •264 268547,39 •285,8 289,8641,53 •300 304706,86 •321 325809,28 •342 346918,63 •
Matrix Stirnfläche Typ. Wanddicke Mantel Außen
Ø [mm] Ø [mm][cm2] 1 mm 1,5 mm 2 mm
METALIT® Runde Form Teil 2
362
400
425
450
3661029,22 •4041256,64 •4291418,63 •4541590,44 •
362 3661029,22 •400 4041256,64 •450 4541590,44 •
377 3811116,28 •
Matrix
(OV)(RT)
Frontal areaMantle wallthickness
[cm2]A x B [mm] [mm]
120 x 60169,7 x 80,8
61,40118,7
1,51,5
PM-METALIT® Oval Shape (OV)/Racetrack (RT)
Matrix Frontal areaMantle wallthickness
[cm2]A x B [mm] [mm]
135,7 x 71139 x 82147 x 77,7150 x 95
177,8 x 114,3
79,289,2893,32
111,65161,05
1,51,51,51,51,5
PM-METALIT® Elliptical Shape
Emitec standard diameter programme.
Status: October 2013
Germany (headquarters):Emitec Gesellschaft für Emissionstechnologie mbHHauptstraße 128D-53797 LohmarTelephone: +49 2246 109 0Facsimile: +49 2246 109 109
France:Emitec France S.A.SZI de FaulquemontAvenue Jean Monnet57380 FaulquemontTelephone: +33 387819 000Facsimile: +33 387819 195
USA:Emitec Inc.3943 W. Hamlin RoadRochester Hills, Michigan 48309Telephone: +1 248 276 6430Facsimile: +1 248 276 6431
India:Emitec Emission Control TechnologiesIndia Pvt. Ltd.Survey No. 275 & 282 (Part)Village Maan, Taluka MulshiPune 411 057Telephone: +91 20 3911 4800Facsimile: +91 20 3911 4999
China:EMITEC Emission Treatment System (Shanghai) Co.,LtdRoom B, 6th Floor, No. 26 BuildingNo. 1000 Jinhai RoadJinqiao Export Processing ZonePudong 201206 ShanghaiTelephone: +86 21 5055 0567 Facsimile: +86 21 5055 0568
Japan:Emitec Japan K.K.Cedar Shibaura 4 F3-13-16 Shibaura, Minato-kuTokyo 108-0023Telephone: +81 35 418 6066Facsimile: +81 35 418 6080
South Korea:Emitec Korea Inc.Room No. 817/818, Dongmoon Tower-II,358-25, Hosu-Ro, ilsandong-gu Goyang-si, Gyeonggi-do, 410-704Telephone: +82 31 902 9490Facsimile: +82 31 902 9493
Our latest publications and leaflets as well as further information on Emitec can be found onwww.emitec.com
Dimensions, structures, materials
Extract from the list of manufacturable metalsubstrate designs
PM-METALIT®
200 cpsi fleececorrugated
layer
Cell density
Standardmatrix length
[ mm ]300 65
Foil thickness [ µm ]
PM-METALIT® Structure
123 mm147 mm171 mm195 mm219 mm
Matrix Frontal area Typ. mantle wall thickness Outer
Ø [mm] Ø [mm][cm2] 1 mm 1,5 mm 2 mm
PM-METALIT® Round Shape
174,6 178,6239,43 •165 168213,82 •
••••••••••••••••
150 153176,71 •146 149167,42 •143 146160,61 •140,5 143,5155,04 •135 138143,14 •127 130126,68 •118 121109,36 •115 118103,87 •114 117102,07 •110 11395,03 •105 10886,59 •
98,4 101,476,05 •93 9667,93 •90 9363,62 •85 8856,75 •80 8350,27 •79 8249,02 •
70 7338,48 •77 8046,57 •
190 194283,53 •200 204314,16 •213 217356,33 •230 234415,48 •242 246459,96 •254 258506,71 •264 268547,39 •285,8 289,8641,53 •300 304706,86 •321 325809,28 •342 346918,63 •
Matrix Stirnfläche Typ. Wanddicke Mantel Außen
Ø [mm] Ø [mm][cm2] 1 mm 1,5 mm 2 mm
METALIT® Runde Form Teil 2
362
400
425
450
3661029,22 •4041256,64 •4291418,63 •4541590,44 •
362 3661029,22 •400 4041256,64 •450 4541590,44 •
377 3811116,28 •
Matrix
(OV)(RT)
Frontal areaMantle wallthickness
[cm2]A x B [mm] [mm]
120 x 60169,7 x 80,8
61,40118,7
1,51,5
PM-METALIT® Oval Shape (OV)/Racetrack (RT)
Matrix Frontal areaMantle wallthickness
[cm2]A x B [mm] [mm]
135,7 x 71139 x 82147 x 77,7150 x 95
177,8 x 114,3
79,289,2893,32
111,65161,05
1,51,51,51,51,5
PM-METALIT® Elliptical Shape
Emitec standard diameter programme.
Status: October 2013
Germany (headquarters):Emitec Gesellschaft für Emissionstechnologie mbHHauptstraße 128D-53797 LohmarTelephone: +49 2246 109 0Facsimile: +49 2246 109 109
France:Emitec France S.A.SZI de FaulquemontAvenue Jean Monnet57380 FaulquemontTelephone: +33 387819 000Facsimile: +33 387819 195
USA:Emitec Inc.3943 W. Hamlin RoadRochester Hills, Michigan 48309Telephone: +1 248 276 6430Facsimile: +1 248 276 6431
India:Emitec Emission Control TechnologiesIndia Pvt. Ltd.Survey No. 275 & 282 (Part)Village Maan, Taluka MulshiPune 411 057Telephone: +91 20 3911 4800Facsimile: +91 20 3911 4999
China:EMITEC Emission Treatment System (Shanghai) Co.,LtdRoom B, 6th Floor, No. 26 BuildingNo. 1000 Jinhai RoadJinqiao Export Processing ZonePudong 201206 ShanghaiTelephone: +86 21 5055 0567 Facsimile: +86 21 5055 0568
Japan:Emitec Japan K.K.Cedar Shibaura 4 F3-13-16 Shibaura, Minato-kuTokyo 108-0023Telephone: +81 35 418 6066Facsimile: +81 35 418 6080
South Korea:Emitec Korea Inc.Room No. 817/818, Dongmoon Tower-II,358-25, Hosu-Ro, ilsandong-gu Goyang-si, Gyeonggi-do, 410-704Telephone: +82 31 902 9490Facsimile: +82 31 902 9493
Our latest publications and leaflets as well as further information on Emitec can be found onwww.emitec.com