frm catálogo 2012

FRM | index MTB ROAD Description of FRM icons Page 4

Anakin 29er frame & bike Pages 6 - 7

Galaxy 29er and 26” frame & bike Pages 8 - 9

8HP 29er and 26” frame & bike Pages 10 - 11

8HP Full 29er frame & bike Pages 12 - 13

Frame dimensions Page 14

Air-Way XC Super Race 29er and 26” Page 17

Air-Way XC Team 29er and 26” - Cometa 29er Page 18

Ariel Carbon Tubular - Ariel Super Race 0

Ariel Race Rims: BOR 373R - BOR350R Page 21

Hubs: Ariel - Quick Releases Page 22

Urano XC Super Race 29er and 26” Page 24

Urano XC Super Race Tubular 29er and 26” Page 25

Urano XC Team 29er and 26” Page 26

Hubs: Urano disc Page 28

Quick Releases and Thru-Axles Page 29

Rims: XMD 29er and 26” Page 30

Tubeless Ready - Sealant Programme Page 31

CU2-M18 - CU2-M27 Page 33

Bottom Brackets - FD-M ZX Short Front Derailleur Page 34

3TO2 chainrings - X-Glide c.rings - Fixing bolts - Cog 36T Page 35

DBR XC Enduro - Discs & accessories Page 37

Stem: Web-Stem 6B Grips: Silicone and Foam Page 39

Carbon Handlebars: Web-Bar 329 - 32 - 32 Riser - Safe-Bar Page 40

Seatposts: Black Hole carbon - ST-M / R-11 Page 41

Seatposts: ST-11E - ST-M10 Page 42

Seat Collars: SC32 - SC35 Saddles: Black Hole - Aspen Page 43

Headsets: D-Set 1 1/8” or 1,5 Taper Pages 44 - 45

Accessories Page 46

Titaniun Bolts Bearings Lubricants Morgan Blue Page 47

General information - Functions Page 16

FRAMES & COMPLETE BIKES Page 5

ROAD WHEELS / HUBS Page 19

MTB CRANKSETS Page 32

DISC BRAKES DBR XC Team Page 36

COMPONENTS MTB & ROAD Page 38

MTB WHEELS / HUBS Page 23

FORKS Page 15

Urano XC Enduro 29er and 26” Page 27

4 2012 | ROAD MTB

FRM | icons

MTB | 2012

Post-Mount type brake caliper assembly has, already for a number of years now, taken the place of the old International Standard on forks whilst on frames this change-over is taking place now. The FRM Anakin, Galaxy and 8HP Full Suspended use the Post-Mount standard for 160mm discs in 2012. The brake caliper is fixed directly to the frame without the use of an adaptor.

E-Thru type frames use X-12 (142mm) rear hubs with 12mm thru-axles. The thru-axle is supplied with the frame. In general, E-Thru type frames are supplied with a Shimano quick release thru-axle which can be replaced by the FRM Task E-Thru for a weight saving of 47g.

The X-12 hubs are compatible with both X-12 and E-Thru type frames. They have a lock-nut of 142mm with a 12mm bore. The frame-wheel rigidity is exceptionally better than that created with traditional quick-release. Our rear Urano hubs can be modified from 5mm quick release compatible to a 10mm quick release thru-axle or even to a X-12 system just by changing the external axle caps.

The Press-Fit type bottom brackets use plastic bearing cups for cranks with 24-25mm axles. MTB Press-Fit bottom brackets are 89,5mm (symmetrical) or 92mm (asymmetrical) wide. FRM carbon fibre frames feature a 89,5mm Press-Fit bottom bracket. Careful attention should be paid to the crank-set installation manual for correct use of the supplied spacers.

FRM aluminium frames feature a threaded BSA 68mm wide type bottom bracket.

The International Standard system for fixing brake calipers has been replaced by the newer Post-Mount system on front forks for a number of years now whilst it still has a solid base on frames, particularly those made from aluminium. The 8HP Front suspended frame uses the I.S. standard for assembly with 160mm and 140mm discs.

QR15 type forks are a valid alternative to traditional forks with slotted drop-outs for an increased tortional rigidity which leads to a more precise and secure drive. The QR15 axle with 15mm diameter is supplied with the fork. The QR15 axles can be either of the quick release variety or screw type with allen head. The QR15 axle supplied with FRM forks is of the screw type to reduce the weight to the minimum possible.

The FRM fork crown is produced for the 11/8” standard. A carbon/aluminium sandwich system is used to produce the steerer with base diameter of 30mm which joins to the 28,6mm diameter of the upper part of the tube.

The FRM fork crown is produced for the new 1,5” Taper standard. The steerer tube base has a diameter of 40mm which joins to a diameter of 28,6mm in the upper part of the tube. The tube is lathe worked from a bar of 7075 (Ergal) aluminium.

This symbol indicates all the FRM products where some part of the component is made in Titanium: hardware, quick release axles, freewheel toothed rings etc. The titanium used is always grade 9 with 6AL-4V code.

Traditional type quick release with 5mm axles have been the standard for road and MTB use for deca-des. Made with steel or titanium axles, they are the lightest system available to fix wheels onto a frame. The FRM SK10-Team quick release with titanium axles only weight 48g. per set. Perfect for road bike or 26” front suspended MTB use.

Thru-axle type quick release are increasingly used in MTB, particularly for 29er use as larger wheels create a much higher torque on forks and frames. The thru-axle quick release, with 9mm front and 10mm rear aluminium axles are used with traditional type forks and frames and hubs with 9mm front and 10mm rear bores. A reduction in flexibility of around 20-25% can be calculated with respect to traditional quick releases.

FRM freewheels turns on two bearings, one of which has a double row of ball bearings. The engage-ment is created with the use of three steel pawls each one activated by it’s own spring. The toothed ring onto which the pawls are activated is machined from titanium.

The FRM Urano hubs have been designed following the Shimano Center-Lock concept whilst using normal six-hole discs. Any six-hole disc is inserted onto a support with pins rather than threaded bores for the six bolts. A lock-ring is then screwed on to block the disc into position. This system facilitates the assembly and disassembly of the discs.

The CX-Ray wheel spokes are bladed for optimised aerodynamics. The driving torque from the cogs to the tyre is better than that of traditional round spokes. The mechanical characteristics are greater, with respect to the double-butted spokes from which they derive, due to the effect of the cold forging.

The Sapim wheel spokes are double-butted for weight reduction without compromising their resistance to traction or stress. The cold forging process increases the elasticity of the spoke evenly.

Tubular rims are not very common for general MTB use due to the problem of tyre flats. There is a much more vast request on the X-Country circuit due to the presence of technical zones where it is possible to change wheels. The FRM tubular wheels, both for 26” and for 29”, are the lightest ever produced with aluminium rims.

The FRM CU2-M18 mounts two chainrings compatible with both 9sp and 10sp chains. We closely studied our chainring pattern combinations long before the two most important component producers did so and they have, in some way, conformed to our standards. For 26” bikes we offer the following combinations: 42-27 and 40-27t. For 29” bikes we offer: 38-24 38-25 and 36-22t.

The FRM Air-Way XC Super Race (ex Full Carbon) features a hollow carbon fibre brace. The carbon fibre structure increases the torsional rigidity by 12% with respect to the aluminium brace, whilst simulta-neously reducing the weight by approx. 50g.

The top of the range rims XMD299 29er, XMD333 26” & 29er, XMD309 Tubular 26” & 29er feature welded joints. The welding is necessary in the presence of very thin wim walls, whilst the XMD388 features a thick enough wall profile to allow a sleeved joint. The welded joint offers a greater stability and strenght

BIKES & FRAMES

6 2012 | MTB 7MTB | 2012

ANAKIN | bike 29er ANAKIN | frame 29er! NEW !1,8-1,4-1,8mm

! NEW !

XCR1 kg 8,2 29er

7

9

12

5

15

2

6

8

14

1

17

10

18

16

4

4

11

13

14

3 3

XCR1 | kg 8,2 | kg 7,4 rigid

XCR2 | kg 8,55 | kg 7,7 rigid

29”

29”

14

- 100% Made in Italy - Carbon fibre tubesets manufactured at carbocom under FRM license- Assembly: BCF Bandage Carbon Fibre by hand in Italy - Optimised Ground Absorption rear stays- Post-Mount brake support - E-Thru dropouts (142mm) with replaceable derailleur hanger- Head Tube: 1,5” - 1 1/8“ Integrated (56mm fork head) - Headset: FRM D-Set 1,5” Taper ZS/IS included- Bottom Bracket: Press-Fit 89,5mm symmetric (41mm hole)- Seatpost Collar: FRM SC35 Ti (11g.) included- Seatpost diameter: 31,6mm - Seatpost Dia.: 31,6mm - Shelter BC shields protect exposed tubes- Four standard sizes (see page 14)- Colour: Clear coating - Rider weight limit: 90kgWeight: 1.260g. (Medium) + E-Thru axle 38g

1 - FRM Anakin 29er. Post-Mount / E-Thru2 - FRM Air-Way Super Race 85mm 1,5” QR15 OPTION: Cometa 1,5” rigid 3 - FRM Urano XC Super Race QR15 / E-Thru OPTION: Urano Super Race Tubular QR15 / E-Thru4 - FRM Thru-axles QR15 / E-Thru 125 - Sapim Super Spoke 1,8-1,4-1,8mm6 - FRM CU2-M18NS 36-22 (PF 89,5) Titanium bolts7 - Sram XX 8 - FRM FD-M ZX short cage. Down-Pull. Titanium bolts9 - SRAM XX 11-36 10 - KMC X10SL. Hollw pins and plates11 - FRM Web-Bar 329 Carbon + Silicone Grips +Safe Bars12 - FRM Web-Stem 6B. Titanium bolts (75-90-100mm)13 - FRM D-Set 1,5” Taper ZS/IS. Titanium bolt14 - FRM DBR XC Team. Titanium bolts. Rotors 160-160mm15 - FRM Black Hole carbon 31,6x350. Titanium bolts16 - FRM SC35 Ti. Titanium bolt17 - FRM Black Hole. Carbon18 - Kenda Kozmic Lite DTC 29” x 2,0” + FRM Sealant

1 - FRM Anakin 29er. Post-Mount / E-Thru2 - FRM Air-Way XC Team 85mm 1,5” QR15 OPTION: Cometa 1,5” rigid3 - FRM Urano XC Team QR15 / E-Thru 124 - FRM Thru-axles QR15 / E-Thru 125 - Sapim CX-Ray. Bladed. Black6 - FRM CU2-M18NS 36-22 (PF 89,5) Titanium bolts7 - Sram X08 - FRM FD-M ZX short cage. Down-Pull. Titanium bolts9 - SRAM X0 11-3610 - KMC X10L. Hollow pins11 - FRM Web-Bar 329 Carbon + Silicone Grips + Safe Bars12 - FRM Web-Stem 6B. Titanium bolts (75-90-100mm)13 - FRM D-Set 1,5” Taper ZS/IS. Titanium bolt14 - FRM DBR XC Team. Titanium bolts. Rotors 160-160mm15 - FRM ST-M10 Ti. 31,6x350 or 400mm. Titanium bolts16 - FRM SC35 Ti. Titanium bolt17 - FRM Aspen Ti.18 - Kenda Kozmic Lite DTC 29” x 2,0” + FRM Sealant

8 2012 | MTB 9MTB | 2012

GALAXY | bike 29er 26”! NEW ! GALAXY | frame 29er 26”

! NEW !

XCR1 | kg 8,1 | kg 7,3 rigid kg 7,7529er 26”


XCR2 Rigid kg 7,7 29er

7

9

12

5

15

2

6

8

14

1

17

10

18

16

4

4

11

13

14

14

3 3

- 100% Made in Italy Tube set manufactured by Carbocom under FRM Licence - Assembly: BCF Bandage Carbon Fibre by hand in Italy - Optimised Ground Absorption rear stays- Post-Mount / E-Thru dropouts (142 x 12mm)- Hard anodised 12mm thru axle - Head Tube: 1,5” - 1 1/8“ Integrated (56mm fork head) - Headset: FRM D-Set 1,5” Taper ZS/IS included- Bottom Bracket: Press-Fit 89,5mm (41mm hole) - Seatpost Collar: FRM SC35 Ti. included- Seatpost diameter: 31,6mm - Shelter BC shields included- Four standard sizes (see page 14)- Colour: Clear coating - Rider weight limit: 90kgWeight: 1.180g. (Medium) + E-Thru axle 38g.

1 - FRM Galaxy. Post-Mount / E-Thru Post-Mount / QR102 - FRM Air-Way Super Race 85mm 1,5” QR15 95mm. 1,5” OPTION: Cometa 1,5” rigid No3 - FRM Urano XC Super Race QR15 / E-Thru QR9 / QR10 OPTION: Urano XC Super Race Tubular QR15 / E-Thru4 - FRM Thru-axles QR15 / E-Thru 12 Task Team5 - Sapim Super Spoke 1,8-1,4-1,8mm6 - FRM CU2-M18NS 36-22 (PF 89,5) Titanium bolts 40-27 or 42-277 - Sram XX 8 - FRM FD-M ZX short cage. Down-Pull. Titanium bolts9 - SRAM XX 11-36 10 - KMC X10SL. Hollow pins and plates11 - FRM Web-Bar 329 Carbon + Silicone Grips +Safe Bars Web-Bar 32 Carbon12 - FRM Web-Stem 6B. Titanium bolts (75-90-100mm) 100-110mm13 - FRM D-Set 1,5” Taper ZS/IS. Titanium bolt14 - FRM DBR XC Team. Titanium bolts. Rotors 160-160mm 160-140mm15 - FRM Black Hole carbon 31,6x350 Titanium bolts16 - FRM SC35 Ti. Titanium bolt17 - FRM Black Hole. Carbon18 - Kenda Kozmic Lite DTC 29” x 2,0” + FRM Sealant Kenda Small Block 8

1 - FRM Galaxy Post-Mount / E-Thru Post-Mount / QR102 - FRM Air-Way XC Team 85mm 1,5” QR15 95mm. 1,5” OPTION: Cometa 1,5” rigida No3 - FRM Urano XC Team QR15 / E-Thru 12 QR9 / QR104 - FRM Thru-axles QR15 / E-Thru 12 Task Team5 - Sapim CX-Ray a lama. Neri6 - FRM CU2-M18NS 36-22 (PF 89,5) Titanium bolts 40-27 or 42-277 - Sram X0 8 - FRM FD-M ZX short cage. Down-Pull. Titanium bolts9 - SRAM X0 11-36 10 - KMC X10L. Hollow pins11 - FRM Web-Bar 329 Carbon + Silicone Grips +Safe Bars Web-Bar 32 Carbon12 - FRM Web-Stem 6B. Titanium bolts (75-90-100mm) 100-110mm13 - FRM D-Set 1,5” Taper ZS/IS. Titanium bolt14 - FRM DBR XC Team. Titanium bolts. Rotors 160-160mm 160-140mm15 - FRM ST-M10 Ti. 31,6x350 or 400mm Titanium bolts16 - FRM SC35 Ti. Titanium bolt17 - FRM Aspen Ti. Titanium rail18 - Kenda Kozmic Lite DTC 29” x 2,0” Kenda Small Block 8

10 2012 | MTB 11MTB | 2012

8HP | frame 29er 26”8HP | bike 29er 26”

XCR2 kg 8,9

7

9

12

5

15

2

6

8

14

1

17

10

18

16

4

4

29er

11

13

14

14



3 3

- Assembled and hand TIG welded in Italy- Tube set: Easton Ultralite (triple butted 7005 light alloy)- Rear Stays: S-Shaped in light alloy- Dropouts: forged. Replaceable hanger - Head Tube: Zero Stack (hole 44mm) - Headset: FRM D-Set 1,5” Taper 44 included- Bottom Bracket: BSA 68mm - Seatpost collar: SC35 Ti with Titanium bolt included- Seatpost Dia.: 31,6mm- Four standard sizes (see page 14)- White Powder Painted- Rider weight limit: 85kgWeight: 29er 1.450g. (Medium) 26” 1.270g. (Medium)

1 - FRM 8HP2 - Rock Shox Reba RL 100mm 1,5” White OPTION: Cometa 1,5” rigid. White No3 - FRM Urano XC Team QR9 / QR104 - FRM Thru axles Task Team5 - Sapim Race 2,0-1,8-2,0. Black6 - FRM CU2-M18NS 36-22 (BSA) 40-27 or 42-277 - Sram X9 8 - FRM FD-M ZX short cage. Down-Pull9 - SRAM X9 11-36 10 - KMC DX1011 - Truvativ Stylo T30 flat + Foam Grips12 - FRM Web-Stem 6B (75-90-100mm) 100-110mm13 - FRM D-Set 1,5” Taper 4414 - Avid Elixir 5 White. Disc dia. 180-160mm15 - FRM ST-M10 31,6x350 or 400mm16 - FRM SC3517 - FRM Aspen Ti. Titanium rails18 - Kenda Kozmic Lite DTC 29” x 2,0” + FRM Sealant Kenda Small Block 8

1 - FRM 8HP2 - FRM Air-Way XC Team 85mm 1,5” QR15 95mm. 1,5” OPTION: Cometa 1,5” rigid. White No3 - FRM Urano XC Team QR15 / QR10 QR9 / QR104 - FRM Thru axles QR15 / Task Team Task Team5 - Sapim CX-Ray. Bladed. Black6 - FRM CU2-M18NS 36-22 (BSA) Titanium bolts 40-27 or 42-277 - Sram X0 8 - FRM FD-M ZX short cage. Down-Pull. Titanium bolts9 - SRAM X0 11-36 10 - KMC X10L. Hollow pins11 - FRM Web-Bar 329 Carbon + Silicone Grips + Safe Bars Web-Bar 32 Carbon12 - FRM Web-Stem 6B. Titanium bolts (75-90-100mm) 100-110mm13 - FRM D-Set 1,5” Taper 44. Titanium bolt14 - FRM DBR XC Team. Titanium bolts. Rotors 160-160mm 160-140mm15 - FRM ST-M10 Ti. 31,6x350 or 400mm Titanium bolts16 - FRM SC35 Ti. Titanium bolt17 - FRM Aspen Ti. Titanium rails18 - Kenda Kozmic Lite DTC 29” x 2,0” + FRM Sealant Kenda Small Block 8

12 2012 | MTB 13MTB | 2012

8HP Full | frame 29er8HP Full | bike 29er! NEW ! ! NEW !1,8-1,4-1,8mm

XCR1(Tubular) kg 9,8 29er

7

9

12

5

15

2

8 14

1

17

10

18

16

4

4

11

13

14

14

XCR3 | kg 11,0

XCR1 | kg 9,8 29er

XCR2 | kg 10,15 29er

6

29er3 3

- Assembled and hand TIG welded in Italy- Rear wheel travel: 90mm- Suspension design: FRM 4L (FRee Mountain 4 Link)- Shortest chainstays ever: 445mm. BB height: 315 - Tube set: Easton Ultralite (triple butted 7005 light alloy)- Post-Mount brake support- E-Thru dropouts (142 x 12mm)- Head Tube: Zero Stack (hole 44mm)- Headset: FRM D-Set 1,5” Taper 44 included- Bottom Bracket: BSA 68mm - Rear shock: Rock Shox Monarch RT3 (165mm)- Hard anodised suspension axles in light alloy- Full-ball type bearings (Enduro max) with O-Ring shields- Seatpost collar: SC35 Ti with Titanium bolt included- Seatpost Dia.: 31,6mm- Three standard sizes (see page 14)- White Powder Painted- Rider weight limit: 85kgWeight: 2.600g. (Medium) with rear shock + E-Thru axle 38g.

1 - FRM 8HP Full. Post-Mount / E-Thru2 - FRM Air-Way Super Race 100mm 1,5” QR153 - FRM Urano XC Super Race QR15 / E-Thru OPTION: Urano XC Super Race Tubular QR15 / E-Thru4 - FRM thru-axles QR15 / E-Thru 125 - Sapim Super Spoke 1,8-1,4-1,8mm6 - FRM CU2-M18NS 36-22 (BSA) Titanium bolts7 - Sram XX 8 - FRM FD-M ZX short cage. Down-Pull. Titanium bolts10 - KMC X10SL. Hollow pins and cage11 - FRM Web-Bar 329 Carbon + Silicone Grps + Safe Bars12 - FRM Web-Stem 6B. Titanium bolts13 - FRM D-Set 1,5” Taper 44. Titanium bolt14 - FRM DBR XC Team.Titanium bolts. Rotors 180-160mm15 - FRM ST-M10 Ti. 31,6x400mm. Titanium bolts16 - FRM SC35 Ti. Titanium bolt17 - FRM Black Hole. Carbon18 - Kenda Kozmic Lite DTC 29” x 2,0” + FRM Sealant

1 - FRM 8HP Full. Post-Mount / E-Thru2 - FRM Air-Way XC Team 100mm 1,5” QR153 - FRM Urano XC Team QR15 / E-Thru 124 - FRM thru-axles QR15 / E-Thru 125 - Sapim CX-Ray. Bladed. Black6 - FRM CU2-M18NS 36-22 (BSA) Titanium bolts7 - Sram X0 8 - FRM FD-M ZX short cage. Down-Pull. Titanium bolts9 - SRAM X0 11-36 10 - KMC X10L. Hollow pins11 - FRM Web-Bar 329 Carbon + Silicone Grips Safe Bar12 - FRM Web-Stem 6B. Titanium bolts13 - FRM D-Set 1,5” Taper 44. Titanium bolt14 - FRM DBR XC Team. Titanium bolts. Rotors 180-160mm15 - FRM ST-M10 Ti. 31,6x400mm. Titanium bolts16 - FRM SC35 Ti. Titanium bolt17 - FRM Aspen Ti. Titanium rails18 - Kenda Kozmic Lite DTC 29” x 2,0” + FRM Sealant

2 - Rock Shox Reba RL 100mm 1,5”3 - FRM Urano XC Enduro QR9 / E-Thru 127-9 - Sram X9. 11-36 cogset11 - Truvativ Stylo T30 flat + Foam Grips14 - Avid Elixir 5 White. Disc dia 160-160mm All other FRM parts with steel bolts

14 2012 | MTB

anakin 29er

FRAME DIMENSIONS 29er 26”

galaxy 29er

8hp 29er

8hp full 29er

galaxy 26”

8hp 26”

MTB | 2012

P1 P2 A B C D E F a b SMALL 420 370 580 435 1.060 295 95 487 72° 74° MEDIUM 460 410 595 435 1.075 295 105 487 72° 74° LARGE 500 450 615 435 1.095 295 105 487 72° 74° X-LARGE 555 505 630 435 1.110 295 125 487 72° 74°

P1 P2 A B C D E F a b SMALL 480 375 580 435 1.070 295 100 487 72° 74,5° MEDIUM 510 405 595 435 1.085 295 100 487 72° 74,5° LARGE 510 445 615 435 1.105 295 115 487 72° 74,5° X-LARGE 555 505 630 435 1.120 295 115 487 72° 74,5°

P1 P2 A B C D E F a b SMALL 480 375 580 435 1.065 295 100 487 72° 74,5° MEDIUM 510 405 595 435 1.080 295 100 487 72° 74,5° LARGE 510 445 615 435 1.100 295 115 487 72° 74,5° X-LARGE 555 505 630 435 1.115 295 115 487 72° 74,5°

P1 P2 A B C D E F a b X-SMALL 390 330 540 415 1.017 290 100 470 70,5° 74,0° SMALL 410 360 560 415 1.037 290 100 470 70,5° 74,0° MEDIUM 460 410 585 415 1.057 290 115 470 70,5° 73,5° LARGE 510 460 610 415 1.084 290 140 470 70,5° 73,5°

P1 P2 A B C D E F a b SMALL 410 360 560 415 1.037 290 115 470 70,5° 74,0° MEDIUM 460 410 585 415 1.057 290 125 470 70,5° 73,5° LARGE 510 460 610 415 1.084 290 150 470 70,5° 73,5°

Cyclist heightfrom 160 to 172cmfrom 173 to 179cmfrom 180 to 189cmfrom 190 to 200cm



Cyclist heightfrom 150 to 159cmfrom 160 to 170cmfrom 171 to 179cm from 180 to 189cm

Cyclist heightfrom 160 to 170cmfrom 171 to 179cm from 180 to 189cm

P1 P2 A B C D E F a b SMALL 400 340 570 445 1.085 315 90 500 71,5° 74,0° MEDIUM 440 340 590 445 1.110 315 100 500 71,5° 74,0° LARGE 490 390 615 445 1.135 315 110 500 71,5° 74,0°

Cyclist heightfrom 155 to 170cmfrom 171 to 177cmfrom 178 to 185cm

FORKS

16 2012 | MTB 17MTB | 2012

AIR-WAY XC SUPER RACE 29er 26”AIR-WAY | forks 29er 26”

29er

26”

options & accessories

1

1 4

2

3

5

6

4

2

3

5

3

6

6

! NEW !

?

! NEW !40mm

Expander-Plug Team included

Fork oil 200cc

1,5” taper steerer

QR15 dropouts

GENERAL INFO- Made in Italy- New for 2012: increased space between bushings for optimised stability and better sensibility- The air sprung fork features a coil negative spring, an Open Oil Bath damping system a Speed Sensitive Valve (SSV) and a Stable Platform Valve - Open Oil-Bath: 160 cc of racing quality fork oil acts as a damping element, lubricates all moving parts and cools the temperature - Stable Platform Valve: the fork does not works to impulses from the cyclist’s weight shifting. No manual lock-out. The fork does not sag- Tuning: a) Air Pressure b) Threshold c) Progressiveness d) Rebound - Most aluminium parts are CNC machined from 7075 light alloy - 30 mm dia. upper legs in Scandium light alloy. Hard anodised and Teflon coated- Lower legs are made in High Grade Carbon Fibre for weight saving and torsion strength - Double dust seal system for longer life and improved smoothness - Very low maintenance (one or two oil changes per year)DIFFERENT SPECS: * XC Super Race: brace in hollow carbon fibre* XC Team: brace in light alloy with 4 titanium bolts Use only Motul Fork Oil - Factory Line 5W

- Wheel travel: 85 / 100mm

- Height: 492mm / 507mm

- Rake: travel 85mm 47mm Travel 100mm 49mm

- Seerer tube: 1,5” taper only

- Dropouts: slotted 9mm or QR15

- Rider weight limit: 90kg

Weight: slotted dropouts 1.390g. QR15 dropouts: 1.405g. + axle 34g.

A hex key can be stored inside the hollow axle

- Wheel travel: 95 / 110mm (travel 110nn alowed with 1,5” steerer tube only)



- Steerer tube: 1 1/8” in carbon fibre or 1,5” taper in light alloy

- Dropouts: slotted 9mm


Weight: 1 1/8” steerer tube: 1.310g. 1,5” taper steerer t.: 1.360g.

SSV Valve shim is closed. Oil flows from the lower to the higher chamber through variable oil ports of a piston compressed by a tunable spring. Threshold setting.

Oil Valve shim is open. Free flow of oil from lower to intermediate chamber through eight holes

Oil flow is partially directed from the lower to the intermediate chamber through the damping setting hole.

COMPRESSION

EXTENSION

SSV oil ports are closed. SSV Valve shim is open. Oil flow from intermediate to lower chamber through eight holes.

Oil Valve shim is closed. Oil is not transferred from the intermediate to the lower chamber.

Oil flow from the intermediate to the low chamber through the piston shaft, is partialised by the adjustable Damping Piston

18 2012 | MTB

AIR-WAY XC TEAM 29er 26”

COMETA 1,5” 29er

29er

26”

! NEW !

COMETA 1,5” 29er

! NEW !ROAD | 2012- Wheel travel: 85 / 100mm



- Steerer tube: 1,5” taper only

- Dropouts: slotted 9mm or thru-axle QR15


Weight: slotted dropouts 1.440g. QR15 dropouts: 1.455g. + axle 34g.

Use only Motul Fork Oil - Factory Line 5W

- Rigid fork for 29er bikes- Full Carbon- Clear coated- Height: 482mm- Rake: 39mm- Steerer tube: 1,5” taper in carbon fibre- Rider weight limit: 90kgWeight: 620g.

- Wheel travel: 95 / 110mm (travel 110nn alowed with 1,5” steerer tube only)

- height: 465mm / 480mm


- Steerer tube: 1 1/8” in carbon fibre or 1,5” taper in light alloy

- Dropouts: slotted 9mm


Weight: 1 1/8” steerer tube: 1.360g. 1,5” taper steerer t.: 1.410g.

ROAD WHEELSROAD HUBSQUICK RELEASESROAD RIMS

20 2012 | ROAD 21ROAD | 2012

ARIEL SUPER RACE ARIEL RACE ARIEL CARBON TUBULAR ! NEW ! BOR 373R CNC (700) ! NEW !

BOR 373R (700)

1,8-1,4-1,8mm

- For Tubular Tyres- High profile carbon fibre Carbon Tubular 38 rim (20x38mm)- Holes: 20 front (radial) & 24 rear (semi-radial)- Hubs: FRM Ariel Chrome with 17mm diameter axles- Compatible with Shimano & Sram 9 or 10speed groups- Spokes: Sapim CX-Ray Bladed, Black. Alloy Nipples Black- Quick Release: FRM SK10-R Team (titanium axles)- Supplied with Corima red pads- Hand built with digital tension meters for a perfect spoke tension

Weight for pair: 1.145g. w/out Q. R. +48g. with SK10-R Team

- For clinchers- Ultra-light aluminium rims: BOR 373R CNC Black (350g.)- Holes: 24 front (radial) & 28 rear (semi-radial)- Hubs: FRM Ariel Chrome with 17mm diameter axles- Compatible with Shimano & Sram 9 or 10speed groups- Spokes: Sapim Super Spoke 1,8-1,4-1,8mm. The lightest stainless-steel spoke ever produced- Black alloy nipples- Quick Release: FRM SK10-R Team (titanium axles)- Hand built with digital tension meters for a perfect spoke tension

Weight for pair: 1.270g. w/out Q. R. +48g. with SK10-R Team

- For clinchers- Ultra-light aluminium rims: BOR 373R Black (375g.) - Holes: 24 front (radial) & 28 rear (semi-radial)- Hubs: FRM Ariel Pro (black) with 17mm diameter axles- Compatible with Shimano & Sram 9 or 10speed groups- Spokes: Sapim Race 2,0-1,8-2,0mm, black. Black alloy nipples- Quick Release: FRM SK10-Pro (steel axles). Black lever- Hand built with digital tension meters for a perfect spoke tension

Weight for pair: 1.355g. (595+760) w/out Q.R. +69g. with SK10-Pro

- Made in Italy - Extruded from 6082 light alloy - Joint: sleeved - Without eyelets - Dimensions: 19 x 22mm - ERD: 592mm- Black anodised and laser etchedOPTION: holes 24 (front only), 28

Weight: 370 / 375g.

- Made in Italy- Same profile as the BOR 373R but with CNC machined walls between the spoke holes- Probably the lightest road rim in light alloy worldwide - Extruded from 6082 light alloy - Joint: sleeved - Without eyelets - Dimensions: 19 x 22mm - ERD: 592mm- Black anodised and laser etched- AVAILABLE ONLY WHEN NEW PATEND WILL BE APPROVED

Weight: 350 / 355g.

SK10-R Team quick releases SK10-Pro quick releases

22 2012 | ROAD

MTB | 2012

ARIEL CHROME ARIEL PRO

SK10-R TEAM SK10 PRO

- Made in Italy- Entirely in Aluminium- 17mm diameter axles for maximum rigidity- Sealed Aluminium Freewheel with three pawl system- Freewheel toothed ring in Titanium- Rear hub is supplied with 11 and 12t cog-set lock-rings- Compatible with Shimano & Sram 9 or 10speed groups- Quick Release: FRM SK10-R Team (titanium axles). Black leverOPTION: Holes Front 20-24, Rear 24-28

Weight: Front 92g. Rear 202g +48g. with SK10-R Team

- Made in Italy- Entirely in Aluminium- 17mm diameter axles for maximum rigidity- Sealed Aluminium Freewheel with three pawl system- Freewheel toothed ring in steel- Rear hub is supplied with 11 and 12t cog-set lock-rings- Compatible with Shimano & Sram 9 or 10speed groups- Quick Release: FRM SK10-Pro (steel axles). Black lever- Holes: Front 24, Rear 28

Weight: Front 92g. Rear 210g +69g. with SK10-Pro

- CNC machined from light alloy- 4mm Titanium axles- Lever anodised Red, Blue, Orange, Titan, Gold, Black

Weight: 48g. pair

- CNC machined from light alloy- 4,5mm Steel axles- Lever anodised Black

Weight 69g. pair

11 and 12T lockrings

MTB WHEELSMTB HUBSQUICK RELEASESDISC RIMSROAD RIMSSEALANT

24 2012 | MTB 25MTB | 2012

URANO XC SUPER RACE 29er 26” URANO XC SUPER RACE TUBULAR 29er 26”

29er

26”

29er

26”

! NEW !

XMD 309 Tubular

! NEW !

XMD 333 CNC

1,8-1,4-1,8mm 1,8-1,4-1,8mm

OPTIONS OPTIONS26”

- Hubs and rims are made in Italy - The XMD 309 Tubular 29er (360gr) is compatible with Tubular tyres - Welded join, anodised Black and laser etched. With eyelets- Asymmetric profile amd steel eyelets allow for up to 120kg of spoke tension, not possible with rims without eyelets- Spokes: the revolutionary Sapim Super Spoke 1,8-1,4-1,8mm. Black alloy nipples- Hubs: FRM Urano Super Race. Toothed ring in Titanium. Holes: 32- Quick releases: Task Team thru-axle (100 / 9mm I 135 / 10mm)- Boltless disc installation - Rider Weight Limit: 80kgOPTION QR15 front hub (100 / 15mm) X-12 rear hub (142 / 12mm)

Weight: 1.340g. +72g. quick releases

- Hubs and rims are made in Italy - The lightest 29” wheels available in light alloy- Tubeless ready for Standard tyres with Sealant or UST - Supplied with XMD333 rims. XMD333 CNC rims will be suppled only after the new patent approval - Welded joint. Anodised and laser etched- Asymmetric profile amd steel eyelets allow for up to 120kg of spoke tension, not possible with rims without eyelets - Spokes: the revolutionary Sapim Super Spoke 1,8-1,4-1,8mm. Black alloy nipples- Hubs: FRM Urano Super Race. Drilled flanges and toothed ring in titanium. Holes: 32 - 32- Quick releases: Task Team thru-axle (100 / 9mm I 135 / 10mm)- Boltless disc installation- Supplied with White Tape, Spark valves and 500cc of FRM Sealant.- Rider weight limit: 75kgOPTION: QR15 front hub (100 / 15mm) X-12 rear hub (142 / 12mm)

Weight: 1.335g. + 20g. White Tape & air valves +72g. quick releases

- Hubs and rims are made in Italy - Tubeless ready for standard tyres with Sealant or UST- At 320gr, the XMD333 is one of the lightest rims in the world. Welded joint. Black anodised- Asymmetric profile amd steel eyelets allow for up to 120kg of spoke tension, not possible with rims without eyelets- Spokes: the revolutionary Sapim Super Spoke 1,8-1,4-1,8mm. Black alloy nipples- Hubs: FRM Urano Chrome. Toothed ring in titanium. Holes: 28 - 32- Quick releases: Task Team thru-axle (100 / 9mm I 135 / 10mm)- Boltless disc installation- Supplied with White Tape, Spark valves and 500cc of FRM Sealant. - Rider weight limit: 85kgOPTION: as above

Weight: 1.215g. + 20g. White Tape & air valves +72g. quick releases

Task Team. Thru-axle quick release


- Hubs and rims are made in Italy - The XMD 309 Tubular (320gr) is compatible with Tubular tyres - Welded join, black anodised and laser etched. With eyelets- Asymmetric profile amd steel eyelets allow for up to 120kg of spoke tension, not possible with rims without eyelets- Spokes: the revolutionary Sapim Super Spoke 1,8-1,4-1,8mm. Black alloy nipples- Hubs: FRM Urano Chrome. Toothed ring in Titanium. Holes: 24 front - 28 rear- Quick releases: Task Team thru-axle (100 / 9mm I 135 / 10mm)- Boltless disc installation - Rider Weight Limit: 80kgOPTION: black or white rims QR15 front hub (100 / 15mm) X-12 rear hub (142 / 12mm)

Weight: 1.240g. +72g. quick releaseswhite rim

26 2012 | MTB 27MTB | 2012

URANO XC TEAM 29er 26” URANO XC ENDURO29er

26”

29er

26”

29er 26”! NEW !

XMD333XMD388

OPTIONS

OPTIONS

- Hubs and rims are made in Italy - Tubeless Ready for standard tyres with Sealant or UST - Rims: XMD333 at 360gr with eyelets. Welded joint. Black anodised and laser etched- Asymmetric profile amd steel eyelets allow for up to 120kg of spoke tension, not possible with rims without eyelets- Spokes: Sapim CX-Ray, bladed. Black. Nipples: light alloy, red- Hubs: FRM Urano Team, red. Toothed ring in Titanium. Holes: 32 / 32- Quick releases: Task Team thru-axle (100 / 9mm I 135 / 10mm)- Boltless disc installation- Supplied with White Tape, Spark valves and 500cc of FRM Sealant- Rider weight limit: 85kgOPTION: black, titan, blue or orange anodised hubs with black or white rims Lefty front hub (Black only) QR15 front hub (100 / 15mm) X-12 rear hub (142 / 12mm)

Weight: 1.400g. +20gr White Tape & air valves +72g. quick releases

- Hubs and rims are made in Italy - Tubeless Ready for standard tyres with Sealant or UST- Rim: XMD388 29er with eyelets. Sleeved joint. Anodised and laser etched- Asymmetric profile amd steel eyelets allow for up to 120kg of spoke tension, not possible with rims without eyelets - Spokes: Sapim Race 2,0-1,8-2,0mm, black with black alloy nipples- Hubs: FRM Urano Team, black. Toothed ring in Titanium. Holes: 32- Quick releases: Task Team thru-axle (100 / 9mm I 135 / 10mm)- Boltless disc installation- Supplied with White Tape, Spark valves and 500cc of FRM Sealant - Rider Weight Limit: 90kgOPTION: Lefty front hub QR15 front hub (100 / 15mm) QR20 front hub (110 / 20mm) X-12 rear hub (142 / 12mm)

Weight: 1.620g. +20g. White Tape & air valves +72g. quick releases

- Hubs and rims are made in Italy - Tubeless Ready for standard tyres with Sealant or UST - Rims: XMD333. 320g. with eyelets. Welded joint. Black anodised and laser etched- Asymmetric profile amd steel eyelets allow for up to 120kg of spoke tension, not possible with rims without eyelets- Spokes: Sapim CX-Ray, bladed. Black. Nipples: light alloy, red- Hubs: FRM Urano Team, red. Toothed ring in Titanium. Holes: 28 / 32- Quick releases: Task Team thru-axle (100 / 9mm I 135 / 10mm)- Boltless disc installation- Supplied with White Tape, Spark valves and 500cc of FRM Sealant- Rider weight limit: 85kgOPTION: as above


- Hubs and rims are made in Italy - Everyday wheels for use with front or full XC bikes. Great for Super Enduro- Tubeless Ready for standard tyres with Sealant or UST- Rim: XMD388 with eyelets. Sleeved joint. Anodised and laser etched- Asymmetric profile amd steel eyelets allow for up to 120kg of spoke tension, not possible with rims without eyelets - Spokes: Sapim Race 2,0-1,8-2,0mm, black with black alloy nipples- Hubs: FRM Urano Team, black. Toothed ring in Titanium. Holes: 32- Quick releases: Task Team thru-axle (100 / 9mm I 135 / 10mm)- Boltless disc installation- Supplied with White Tape, Spark valves and 500cc of FRM Sealant - Rider Weight Limit: 90kgOPTION: as above



colours white rim lefty hub


QR20 hub lefty hub

28 2012 | MTB 29MTB ROAD | 2012

URANO TEAM 29er 26” TASK TEAM 29er 26”

SK10-M TEAM 26”

SK10 PRO 26”

TASK E-THRU 29er 26”

! NEW !

! NEW !

! NEW !

OPTIONS

- Made in Italy - Designed for X-Country Racing, they feature large diameter flanges and 17mm axles for increased torsional rigidity - Four Enduro ABEC5 sealed bearings with additional water-proof labyrinth seals - Rubber Lip Seal makes the freewheel completely waterproof - The toothed ring of the freewheel is in Titanium - The 17mm axles in Scandium light alloy are stiff and light. Hard anodised for longer lasting lifespan- Radial lacing: not permitted for disc wheelsets- Boltless disc installation. Additional weight saving of about 25g.- Outer caps convert front and rear hubs into all possible standards OPTION: SK10-M Team quick releases (Titanium axles) weighing 48g. set (100 / 5mm I 135 / 5mm) Task Team thru-axle quick releases (light alloy axles) weighing 72g. set (100 / 9mm I 135 / 10mm) Hub bodies anodised Red, Titan, Blue, Orange or Black Holes: front 28-32. Rear 32 Lefty front hub. Black, 32h only QR15 front hub (100 / 15mm) QR20 front hub (110 / 20mm). Black, 32h only) X-12 rear hub (142 / 12mm)

Weight pair: 350g. (122+228) w/out disc lockring and Q.R. +48g. with SK10-M Team 343g. (119+224) w/out disc lockring and Q.R. +72g. with Task Team 109g. front Lefty 118g. QR15 front w/out disc lockring 160g. QR20 front w/our disc lockring 225g. X-12 rear w/our disc lockring

Toothed ring in Titanium

- Thru-axle type quick release - CNC machined from light alloy - 9mm front and 10mm rear axles in light alloy - Solid axles - Compatible with QR9 front hubs and QR10-135mm hub rear hubs OPTION: Red, Titan, Orange, Blue, Black anodised levers front or rear only

Weight: 72g. pair (33 + 39g.)

- CNC machined from light alloy- 4mm Titanium axles- Lever anodised Red, Blue, Orange, Titan, Gold, Black

Weight: 48g. pair

- CNC machined from light alloy- 4,5mm Steel axles- Lever anodised Black

Weight 69g. pair

- Rear quick release, E-Thru 142 x 12mm- Replaces the original Shimano SM-AX75 (90g.) for a weight saving of 47g.- Lever anodised Black

Weight: 43g.

Three-pawl freewheel 17mm axleLip Seal

QR20 hublefty hub

Available colours

Available plugs 5mm hole Front QR9 Front QR15 Rear QR10 Rear X-12

30 2012 | MTB 31MTB | 2012

XMD333 CNC Tubeless Ready 29er

XMD333 Tubeless Ready 29er 26”

XMD309 Tubular 29er 26”

XMD388 Tubeless Ready 29er 26”

TUBELESS SEALANT

RRS RIM STRIP

WHITE TAPE

! NEW !

XMD | disc rims

SPARK AIR VALVE

SYRINGE

! NEW !

XMD333

XMD 309 Tubular

XMD388

- Made in Italy- Designed for X-Country Racing. Tested in the World Cup- Supplied Tubeless Ready (White Tape & air valves included) for both traditional and UST tyres- Welded joint. Anodised and laser etched- Eyelets: single in stainless steel- Asymmetric profile for better end even spoke tension - Dimensions: width 24mm ERD 26”: 540mm 29”: 602mm- Suggested spoke tension: 130kg- Rider Weight Limit: 80kgOPTION: 29” Black or White with 32 holes 26” Black or White with 28 (front use only) or 32 holesWeight: 29” 360g. +10g. White Tape & Spark Air Valve 26” 320g. +10g. White Tape & Spark Air Valve +25/30g. for White painted

- Made in Italy- Designed for everyday X-Country use on front or full suspended bikes- Same profile as the XMD333 but with thicker walls- Supplied Tubeless Ready (White Tape & air valves included) for both traditional and UST tyres- Sleeved joint. Matt anodised and laser etched. Eyelets: single in stainless steel- Asymmetric profile for better end even spoke tension - Holes: 32 front & rear. Dimensions: width 24mm ERD 26”: 540mm 29”: 602mm- Suggested spoke tension: 130kg- Rider Weight Limit: 90kgOPTION: 26” or 29”Weight: 29” 425g. +10g. with White Tape & Spark Air Valve 26” 385g. +10g. with White Tape & Spark Air Valve

- Made in Italy- For X-Country Racing with Tubular tyres. Tested in the World Cup- Welded join. Anodised and laser etched- Eyelets: single in stainless steel- Asymmetric profile for better end even spoke tension - Dimensions: width 24mm ERD: 26” 541mm 29” 603mm- Suggested spoke tension: 130kg- Rider Weight Limit: 85kgOPTION: 29” Black with 32h 26” Black or White painted with 24 (front only) or 28 holesWeight: 29” 360g. 26” 315/320g. + 25/30g. for White painted

- Made in Italy- Designed for X-Country Racing- Same profile as the XMD333. 25g. lighter due to CNC milled walls between the spoke holes- The XMD333 CNC is the lightest rim in the world with eyelets- Welded joint. Anodised and laser etched- Eyelets: single in stainless steel- Asymmetric profile for better end even spoke tension- Holes: 32. Dimensions: width 24mm ERD: 602mm- AVAILABLE ONLY WHEN NEW PATEND WILL BE APPROVEDWeight: 335g. +10g. White Tape & Spark Air Valve

- Made in Germany. Used by top racers in the World Cup - Converts tube tyres into Tubeless with RRS Rim Strips or White Tape - Seals any UST tyre - If used correctly, it can seal holes up to 6mm - 50 to 80cc of sealant is needed depending of the tyre dimensions - Available in 500 cc or 1000cc bottles

- To convert normal wheelsets to Tubeless together with Spark Air Valves- 5m tape roll for two 26” or 29” wheels - Compatible with Mavic 517, 717, American Classic 330, DT 4.1 and 4.2, Notubes, FRM XMD 26” & 29” rims- Kit White Tape are supplied with one White Tape roll and 500cc Sealant - The RRS Rim Strip is recommended with other types of rims Weight per wheel: 2g.

- For use with White Tape or RRS rim strip to convert traditional tube wheels into Tubeless - Compatible with Mavic, Bontrager or Shimano XTR UST rims - Presta type with removable coreWeight: 7,5g.

- To convert wheels for tubes to Tubeless, together with Spark Air Valves - Kits RRS are supplied with two RRS Strips, Spark Air Valves, reinforced tape and 500cc Sealant X-COUNTRY: For 26” X-Country rims, 21,5-25mm wide (strip width 25mm)Weight per wheel: 62g.(air valve included) FREERIDE: For 26” rims, 28-32mm wide (strip width 33mm) Weight per wheel: 82g. (air valve included)

- Makes insertion of the sealant quick and easy - Allows for easy measurement of the quantity of liquid inserted into each tyre - Compatible with Shraeder or Presta valves with removable core

33MTB | 2012

MTB | 2012

CU2-M18NS Double 29er 26”

CU2-M27 Triple 26”

OPTIONS ! NEW ! 29er 26”29er

CRANKSETSBRAKESETS

Available colours

- Made in Italy- Compatible with 3x9 drivetrains. Chainring pattern: 42-32-22- Arms and axle are CNC machined from Scandium light alloy- Double-seal bearings with dust seals- CNC machined chainrings from 7075 alloy, polished, anodised and laser etched- Torx type Chainring Fixing Bolts in light alloy. Anodised and laser etched- Gold Plated Titanium left Crank Arm fixing bolts- Dimensions: chain Line: 50 mm Q-Factor: 163mm- Rider Weight Limit: 90kgOPTION: Arm length: 170-172,5-175 mm chainring combination: triple 42-32-22 or 3TO2 conversion 36-22 for 29er and Enduro Bottom Bracket: BSA 68 or 73mm BB30 68-73mm BB30 84,5mm Press-Fit 89,5-92mm Press-Fit 30 73mm Colour of accessories: Red, Orange, Blue, Titan, BlackWeight with Press-Fit Bottom Bracket: 690g, (175mm)

- Made in Italy- Compatible with 2x10 or 2x9 drivetrains - Arms and axle are CNC machined from Scandium light alloy- Double-seal bearings with dust seals- CNC machined chainrings from 7075 alloy, polished, anodised and laser etched- Torx type Chainring Fixing Bolts in light alloy. Anodised and laser etched- Gold Plated Titanium left Crank Arm fixing bolts- Rider Weight Limit: 90kgOPTION: Q Factor 163mm (Hi-Q) or 154mm (Low-Q) Arm length: Hi-Q 170-172,5-175 mm Low-Q 170-175mm Chainring Combination: 42-27 / 40-27 / 38-25 / 38-24 / 36-22 Bottom Bracket: BSA 68 or 73mm BB30 68-73mm BB30 84,5mm Press-Fit 89,5-92mm Press-Fit 30 73mm Colour of accessories: Red, Orange, Blue, Titan, Black

Weight with Press-Fit Bottom Bracket: 40-27 660g, - 36-22 640g. (175mm)

CU2-M27 Single: same specs of CU-M27, with one singlering 34t, installed in the middle position Weight with Press-Fit Bottom Bracket: 635g. (175mm)

CU2-M27 Enduro: same specs of CU-M27, with 3TO2 conversion rings 36-22t Weight with Press-Fit Bottom Bracket: 665g. (175mm)

34 2012 | MTB 35MTB | 2012

Top-Pull

BSA 68 -73mm

BB30 68 - 73mm

PRESS-FIT 89,5 - 92mm

BB30 84,5mm

PRESS-FIT30 73mm NS TOOL 25 - NS TOOL 30

FD-M ZX SHORT

26”

X-GLIDE - X-GLIDE NS CHAINRINGS 26”

CHAINRING BOLTS

36T COG 29er

29er

26”

3TO2 CONVERSION CHAINRINGS 29er

29er! NEW ! 26”

29er

26”

! NEW !

Down-Pull

X-GLIDEX-GLIDE NS

- Front derailleur suitable for MTB 2x9 or 2x10 drivetrains- Also compatible with left trigger shifters- New for 2012: short cage for compatibility with chainrings from 42 to 36T (29er)- Top-Swing type (High-Collar)- Titanium bolts (3 or 4 pcs depending on model)

OPTION: Down-Pull or Top-Pull Collar diameter: 31,8mm or 34,9mm

Weight: 100gr.(Down-Pull), 104g. (Top-Pull)

- Two threaded bearing cups in light alloy (left and right)- Two double seal bearings 37 x 25 x 7mm- Two seal shields- Two 2,5mm spacers (with 68mm BB shells)

Weight: 90g

- Two plastic bearing cups (dia. 41mm Shoulder 2mm)- Two double seal bearings 37 x 25 x 7mm- Two seal shields- Two 1,25mm spacers (with 89,5mm BB shells)- Bearing press tool

Weight: 66g

- Two double seal bearings 42 x 30 x 7mm- Two rubber lip seals- Two 12,5mm spacers (use with 68 and 73mm BB shells)- Two 2,5mm spacers (with 68mm BB shell)

Weight: 66g

- Two plastic bearing cups (dia. 42mm Shoulder 6mm)- Two double seal bearings 37 x 25 x 7mm- Two seal shields- Bearing press tool

Weight: 67g

- Two plastic bearing cups (dia. 46mm)- Two double seal bearings 42 x 30 x 7mm- Two rubber lip seals- Two 12,5mm spacers

Weight: 73mm 72g 68mm 82g

- Tool to disassemble the NS chainrings or the four-arm spider- Available for 25 and 30mm axles

- Made in Italy - CNC machined from high quality 7075 alloy- This cog converts 9sp Shimano XRT CS-M970 or Sram PG990 11-32 cogsets into 12-36t- The 11t cog and lock-ring of 11-32 cogset are removed. The 36t cog is added together with a 12t lock-ringOPTION: 12t Lock-Ring for Shimano compatible Hubs 12t Lock-Ring for FRM HubsWeight: 57g.

- Made in Italy- CNC machined from 7010 light alloy. Compatible with Torx30 key- Laser etched FRM- OPTION: anodised Red, Titan, Blue, Orange, Black, Silver

- Made in Italy- CNC machined from 7075 aluminium. CNC ramps and steel pins for optimal shifting precision- Polished, anodised Black and laser etched- Compatible with triple 4 arm cranksets with BCD 104/64mm- 42, 40, 36t, 34t rings to be assembled in the intermediate position. 27, 26 & 22t rings to be assembled in the internal position- Chainring Radius: 42t: 87mm 40t: 83mm 36t: 74mm 34t: 70mm 27t: 56mm 26t: 54mm- Suggested Combinations: for 26” 42-27, 40-27, 40-26 For 29” 36-22, 34 single speed- Four aluminium spacers (red) to be assembled in the external position. This allows the use of original fixing bolts- Four specific spacers are require for Shimano XTR FC970 2007-08-09 cranksets

Weight: 42t 48g. - 40 & 36t 44g. - 34t 38g. - 27t 29g. - 26t 25g.

Model X-Glide: chainrings 40-27t. compatible with SRAM XX / X0 / X9 crankset. BCD 120-80mm

Model X-Glide NS: chainrings 36-22t. compatible with X0 / X9 cranksets by replacing the original spider

- CNC machined from high quality 7075 light alloy. Ramps and steel pins for optimal shifting precision- Polished, anodised and laser etched

Weight save with respect to the original 42-28t Sram XX Chainrings: 43grWeight save with respect to the original Sram X0 crankset with 39-26 chainrings: 105g.Weight save with respect to the original Sram X0 crankset with 36-22 chainrings: 60g.

Available colours

36 2012 | MTB 37MTB | 2012

DBR XC TEAM DBR XC ENDURO

DISC ROTORS

DISC BOLTS

DISC PADS

DISC ADAPTORS

! NEW ! ! NEW !- Made in Italy- CNC machined form solid blocks of 7075 light alloy. Pump and caliper bodies are hard anodised for an illimited durability- Calipers are of a one-piece design for efficient braking power and modulation. Cooling fins- Two-piston design (22mm) hydraulically controlled, with synthetic pugs to reduce heat transfer - Lever reach is externally adjustable- Organic disc pads with light alloy backing (XT/XTR 2010 compatible)- DOT 5,1 oil (Motul)- Gold-plated Titanium hardware for lever, reservoir cap, caliper and rotor fixing- Frentubo carbon reinforced hydraulic hose with alloy fittings. Front 85cm Rear 145cm (option 155cm)OPTION: Air-Lite Rotors 160-140mm, 160-160mm or 180-160mm pump and caliper cups anodised Red, Orange, Blue, Titan, Black front and rear adaptor for International Standard forks and frames

Weight: 557g. with 160-140mm rotors (including complete hardware) 589g. with 160-160mm rotors (including complete hardware)

- Same specs as the DBR250 except:- Metallic (sinterised) disc pads (XT/XTR 2010 compatible)- Steel hardware for lever, reservoir cap, caliper and rotor fixing- Hydraulic hose reinforced with stainless steel mesh. Steel fittings. Front 90cm Rear 160cmOPTION: Air-Lite Rotors 180-180mm, 203-180mm pump and caliper cups anodised Red, Titan, Blue, Orange or Black front and rear adaptor for International Standard forks and frames

Weight: 770g. with 203-180mm rotors (including complete hardware)

- Diameters: 140 - 160 - 180 - 203mm- Compatible with all 6 bolt disc hubs. Compatible with all brake systems

Weight: 160mm 82g. 140mm 60g. 180mm 109g. 203mm 137g.

XT/ XTR (BR-M975/966/956) compatible in 3 models: - Sintered (Metallic) with steel backing (22g.) - Semi-metallic with steel backing (18g) - Organic with light alloy backing (9g.)

- M5 x10 Titanium. Button head. Torx 20. Gold plated

Weight 13,6g. for 12pcs 12 steel bolts weigh 24g.

- AU01: from Internat. Std. fork to P-M calliper 160mm disc or rear 140mm - AU02: from Internat. Std fork to P-M calliper 180mm disc or rear 160mm - AU04: rear 180mm - AU31: P-M fork to P-M calliper 180mm disc

Available colours

39MTB ROAD | 2012

WEB-STEM 6B Ti. 29er 26”! NEW !

SILICONE GRIPS 130 ! NEW !

FOAM GRIPS 130

MTB | 2012- Made in Italy - CNC machined from a solid billet of Scandium light alloy - New for 2012: four-bolt system on the handlebar- Titanium hardware (6pcs) - Interchangeable angle +/-7° with flip-flop logo - 31,8 mm handlebar diameter - Black anodised and laser etched - Rider Weight Limit: 85kgOPTION: length: 75 - 90 - 100 - 110mm Red, Orange, Blue, Titan, Black cap

Weight: 100g. 75mm 105g. 90mm 109g. 100mm 114g. 110mm

- Grips in soft, light foam, designed by Pro riders for maximum performance and lightness- FRM logo impressed into the foam- One of the cheapest and quickest ways to reduce weight and better the comfort of the bike- Length 130mm- Packaged into an FRM water bottle

Weight: 28g. pair

- Made of memory-form silicone- Slip-proof wet or dry, reduces hand fatigue- Will not harden or fade with time- No glue or lock-ons are required. - Washable- Length 130mm- Packaged into an FRM water bottle

Weight: 85gr pair

Available coloursCOMPONENTS

40 2012 | MTB 41MTB ROAD | 2012

WEB-BAR 329 CARBON 29er 26”

WEB-BAR CARBON RISER 29er 26”

WEB-BAR CARBON 26”

SAFE-BAR

ST-M BLACK HOLE

ST-M11 Ti. ST-M11 Ti. XL

ST-R BLACK HOLE

ST-R 11 Ti.

! NEW !

! NEW !

- Made in Italy at Carbocom under FRM licence- 100% High Module T800 carbon fibre- Flat with ideal width and angle for 29” bikes- Supplied with SAFE-BAR plugs in Red, Titan, Blue, Orange or Black- Width: 685mm. Diameter 31,8mm. Bend: 10° Backwards

Weight: 140g.

- 100% High Module carbon fibre- Flat with ideal width and angle for 26” X-Country bikes- Supplied with SAFE-BAR plugs in Red, Titan, Blue, Orange or Black- Width: 620mm. Diameter 31,8mm. Bend: 5° Backwards

Weight: 130g.

- 100% High Module carbon fibre- Riser with width and inclination ideal for trail bikes- Supplied with SAFE-BAR plugs in Red, Titan, Blue, Orange or Black- Width: 685mm. Diameter 31,8mm. Rise: 20mm. Bend: 9° Backwards 6° Upwards

Weight: 153g.

- Safe-Bar end cups for handlebars in light alloy - Protects the bar from damage due to falls and impactsOPTION: Colour: Red, Orange, Blue, Titan, Black

Weight: 6g. pair

- Made in Italy at Carbocom under FRM licence- Monocoque made from High Modulus Carbon Fibre- Perfect match with Black Hole stem and saddle- One of the lightest seatposts in the World- Aluminium collars allow for secure tilt and fore/aft saddle position- Dimensions: 31,6 x 350mm Offset: 22mm- Gold-Plated Titanium fixing bolts- Rider Weight Limit: 80kgOPTION: Cradle compatible with regular railed saddles Cradle compatible with Black Hole saddles

Weight: 144g.

Compatibility with tubular railed saddle

Compatibility with Black Hole saddle

Weight with Black Hole saddle:195g. Road214g. MTB

- As ST-M Black Hole except: dimensions: 31,6 x 250mm

Weight: 125g.

- Made in Italy- Shaft is machined from Scandium alloy. Externally double-butted- Two-bolt adjustment for accurate and easy saddle tilt- Offset: 28mm- Titanium fixing bolt- Rider Weight Limit: 85kgOPTION: 30,9 or 31,6 x 370mm 30,9 x 420mm (XL)

Weight: ST-M11 Ti. 30,9 x 370mm 188g. ST-M11 Ti. 31,6 x 370mm 193g. ST-M11 Ti. XL 30,9 x 420mm 229g.

- As ST-M11 Ti.- Dimension: 31,6 x 250mm

Weight: 170g.

Available colours

42 2012 | ROAD MTB 43MTB ROAD | 2012

ST-M10 Ti. ST-M10 Ti. XL

ST-11E Ti. ST-11E SC35 Ti. SC32 Ti.

SA-BLACK HOLE

ASPEN Ti.

- Made in Italy- Shaft manufactured in Scandium light alloy. Head and clamp are CNC machined from 7075 light alloy- Compatible with frames with integrated seat tubes- Frame seat tube diameter: Inner 31,6mm. Outer: 35mm- Max possible extension: 20mm- Supplied with 1, 2, 5 & 10mm spacers- Offset: 26mm- Rider Weight Limit: 90kgOPTION: hardaware in Titanium (Ti.) or steel

Weight: ST-11E Ti. 135g. ST-11E 150g.

- Made in Italy- New for 2012: 27,2 x 350mm- CNC Machined from Scandium alloy, externally double butted- Black anodised post. Laser etched- Gold-plated Titanium bolts- Rider Weight Limit: 85kg.OPTION: 27,2 - 30,9 - 31,6 x 350mm 30,9 - 31,6 x 400mm (XL) Cradle Colour: Red, Orange, Blue, Titan, Black

Weight: ST-M10 Ti. 30,9 x350mm 146g. 31,6 x 350mm 155g. ST-M10 Ti. XL 30,9 x400mm 187g. 31,6 x 400mm 192g.

- Made in Italy- Asymmetric seat collars ideal for carbon fibre seatposts as they put less pressure on the frame slot- SC32 compatible with frames that have 31,8mm diameter seat tubes- SC35 compatible with frames that have 34,9mm diameter seat tubesOPTION: SC35 Red, Titan, Blue, Orange, Black, Acid Yellow, Forest Green, Purple SC32 Red, Titan, Blue, Orange, Black

Weight: 11g.

- Made in Italy at Carbocom under FRM licence- Monocoque shell made from T-800 Carbon Fibre- Flexibility and absorption superior than that of carbon saddles featuring tubular rails- Excellent anatomical shape which will not deform over time- Matte Carbon finish- Dimensions: 265 x 120mm- Rider Weight Limit: 80kg

Weight: 70g.

- Carbon Fibre reinforced moulded base - Titanium rails - Leather surface with Kevlar reinforced wings - Super Light foam filling - Dimensions: 270 x 130mm - Colour: Black and Grey with embroidered Red FRM logo - Rider weight limit: 85kg

Weight: 190g.Available colours

Available colours

44 2012 | ROAD MTB 45MTB ROAD | 2012

D-SET 1 1/8” EC34/28,6 I EC34/30

HEADSETS

D-SET 1,5” Taper 44 ZS44/28,6 I EC44/40

D-SET 1,5” Taper 49 ZS44/28,6 I EC49/40

D-SET 1,5” Taper ZS ZS44/28,6 I ZS56/40 EXPANDER-PLUG TEAM

STEM SPACERSFORK CONVERSION

D-SET 1 1/8” ZS ZS44/28,6 I ZS44/30

D-SET 1,5” Taper ZS/IS ZS44/28,6 I IS52/40

! NEW !

! NEW !

! NEW !

- Standard Threadless for 1 1/8” forks and frames with 34mm bores- Angular Contact Bearings ACB 36°x45° (41X30,15X6,5mm)- Stack Height: 26,4mm- See Common Specs

Weight: 83+17g. (Expander-Plug Team) = 100g.- Zero Stack type for 11/8” forks and frames with 44mm upper and lower bores- Angular Contact Bearings ACB 36°x45° (41x30,15x6,5mm)- Stack Height: 14mm- See Common Specs

Weight: 78+17g. (Expander-Plug Team) = 95g.

COMMON SPECIFICATIONS- Made in Italy - Expander-Plug Team allows for easy - 100% machined from light alloy installation and play-adjustment- Angular Contact Bearings ACB 36°x45° - Bolt in Gold-plated Titanium. Torx 25- Sealed bearings and rubber lip seal for OPTION: Red, Orange, Blue, Titan, Black years of trouble-free performance

- Upper Zero Stack. Lower external. For 1,5” tapered forks and frames with 44mm upper and lower bores- Angular Contact Bearings ACB 36°x45° (Upper 41x30,15x6,5mm. Lower 52x40x6,5mm)- Stack Height: 21mm- See Common Specs


- Upper Zero Stack. Lower external. For 1,5” tapered forks and frames with 44mm upper and 49,6mm lower bores- Angular Contact Bearings ACB 36°x45° (Upper 41x30,15x6,5mm. Lower 52x40x6,5mm)- Stack Height: 21mm- See Common Specs


- Upper Zero Stack. Lower Integrated. For 1,5” tapered forks. Frames with 44mm upper and 52mm lower bores- Angular Contact Bearings ACB 36°x45° (Upper 41x30,15x6,5mm. Lower 52x40x6,5mm)- Stack Height: 7mm- See Common specs


- Upper and lower Zero Stack. For 1,5” tapered forks. Frames with 44mm upper and 56mm lower bores (E2)- Angular Contact Bearings ACB 36°x45° (Upper 41x30,15x6,5mm. Lower 52x40x6,5mm)- Stack Height: 9mm- See Common Specs


- Lower Race Crown to mount MTB Forks with 11/8” steerer tube onto frames with conical 1,5”-11/8” headsets- Aluminium- Compatible with ACB 36°x45°, 52mm diameter bearings ONLY

- Light and efficient system to register headset play- Ideal for Carbon Fibre steerer tubes- 100% aluminium- Play-adjustment bolt in Gold-plated Titanium (Torx25)OPTION: Colour: Red, Blue, Black, Orange, Titan

Weight: 17g.

- Stem spacers made from sinthetic plastic- Lighter and cheaper than spacers in carbon fibreOPTION: haight 5 or 10mm

Weight: 1 - 2g.

Available colours

Available colours

46 2012 | ROAD MTB 47MTB ROAD | 2012

DISC BRAKE PADS

ROAD SADDLE BAG MTB SADDLE BAG

SHELTER FRAME PROTECTION

BEARINGS TITANIUM HARDWARE

SYN LUBE

EXTRA DRY LUBE

BRAKE CLEANER

26”

! NEW !

BIO CLEANER

CAMPA GREASEDOUBLE WHEELBAG

BOTTLE OPENER

H2O BOTTLE

29er

MORGAN BLUE LUBRICANTS AND CLEANERS

- Double Pocket with sealed zip - Dimensions: 16x9x8cm - Volume: 0.5lt

- Multilayer elastomeric compound designed to protect down tube and other parts mostly exposed to shocks- Disperses impact energy which decreases at every layer crossing reducing the effect of the shock- Very resilient. A few seconds from the impact the surface returns smooth- Made of 50 layers of a visco-elastomeric material - like a memory foam that absorbs energy before it gets through to the frame.- Resistent to temperatures from -30° a +130°.- Precut in pieces for lower down tube, chainstay, chainsuck, housings

- Single pocket with sealed zip - Dimensions: 12x6.5x7,5cm - Volume: 0.3lt

- Transparent water bottle: 500 cc - Large mouth - FRM logo

- Wheel-bag for 2 Road or MTB 26” / 29er wheels- Padded outer and inner walls- Owner’s name holder- FRM logo- Aluminium

- Allows bottle tops to be reused as it does not cause them to bend- FRM logo

TITANIUM 6AL /4V Gold-Plated- M5 x 10 Button Head. Torx25 (Disc Rotors)- M5 x 12 Torx 25 (FRM CU2 crankset and XC Team forks)- M5 x 15 Torx 25 (FRM CU2 cranks, Web-Stem, SC35, DBR pumps)- M5 x 25 Conical Head. Torx 25 (Expander-Plug Team)- M6 x 15 Allen Head (Disc calipers)- M6 x 50 Torx 25 (Special design for seatpost ST-M10)- M7 x 35 Allen Head (Special design for seatpost ST-M11 ST-R11)

XT/ XTR (BR-M975/966/956) compatible in 3 models: - Sintered (Metallic) with steel backing (22g.) - Semi-metallic with steel backing (18g) - Organic with light alloy backing (9g.)

- Enduro BB 699 9x20x6 ABEC5 2RS FRM front hubs FL-R Team e SP-R Team pre 2010 - Enduro BB 61901 12x24x6 ABEC5 2RS FRM rear hubs FL-R Team, SP-R Team, FL-R/M Pro pre 2010- Enduro BB 6802 15x24x5 ABEC5 2RS FRM front hubs FL-M Team, SP-M Team, FL-R/M Pro, Lefty pre 2010- Enduro MR 1526 15x26x7 ABEC5 2RS FRM rear hubs Titano 2010/2011- Enduro BB 61803 17x26x5 ABEC5 2RS FRM front and rear Urano hubs - Enduro BB 3803 17x26x10 ABEC5 2RS. Double row. Urano and Titano freewheels- Enduro BB 61804 20x32x7 ABEC5 2RS Titano and Urano QR20 front hubs- Nachi BB 6805 37x25x7 ABEC5 2RS Double lip. FRM cranksets with 25mm axle- Enduro BB 61806 42x30x7 ABEC5 2RS FRM cranksets 30mm axle- ACB 413645 30,15x41x6,5 36°x45° Compatible with 1 1/8” Cane Creek headsets. Chrome steel- ACB 523645 40x52x6,5 36°x45° Compatible with 1,5” Cane Creek headsets. Chrome steel

- Professional, high quality lubricant especially for road cycling applications- Contains extra adhesive & synthetic additives to obtain a reduction of friction, a smoother gear shift, a longer lubrication-time. - The treated surfaces glides smoother, more silently, and faster- Does not drain from the chain. - Packaging: 125cc

- This is the ideal solution for cyclocross and MTB-purposes- The silicone spray protects the chain from pollution by dirt or dust- Highly waterproof/repellent - Repels dirt, dust and moisture. - Constant protecting properties in cold and hot conditions. - Penetrates fast into the chain - Prevents corrosion. - Packaging: cans of 400cc and bottles of 125cc.

- Fortified with polymers and selected additives to obtain extreme high gliding capacity- Extreme adhesion to metallic surfaces - Protects against corrosion. Prevents premature wear and distortion - Allows longer time intervals between lubrication services - Ideally suited for use in the hubs as it works well in grease injection systems - Packaging: containers of 200cc and 1000cc. - An active cleaner-degreaser for the chain and gears. Used by several Pro Teams

- Regular application prevents the deterioration of the chain and the gear system- This ensures higher performance, smoother shifts and longer drivetrain life. - 97% biodegradable. Rubber and plastic safe. - Packaging: bottles of 1000cc (available with spray nozzle)- Especially developped for cleaning the disk brake and the bearings

- Packaging: spary cans of 400cc.

Graphic design: PIRULINO.com

WARRANTY

FRM products are guaranteed against any defects for a period of 2 years from the date of purchase by the

first owner, registered in a dealer shop. OBLIGATIONS: In case of defects, FRM pledge to replace or repair, at

their discretion, the part recognised as defective. To be accepted, the rider compliant must be communicated

to FRM through the dealer/importer after his own control.

If FRM after sales checking reveals that the damage is due to one of the reasons mentioned in the following

paragraph, the replacement is no longer accepted and the defective item is sent back to the plaintiff who

supports the shipping fees.

LIMITATIONS: The guarantee does not cover damage resulting from transportation, warehousing, accidents,

negligence, impact or falls, non-compliance with the information in the instruction manuals, assembly errors,

assembly using non-compatible products, bad maintenance, modifications or alterations to the product. The

guarantee does not cover parts and components subject to normal wear and tear such as ball-bearings,

bushings, seals, brake pads, disc rotors, etc.

FRM Bike Technology, Via Mattei 18a, 48025 Riolo Terme (RA) Italy

Tel +39 0546 70310 - Fax +39 0546 74623

e-mail pubblic: [email protected] - e-mail export: [email protected]

WORLDWIDE DISTRIBUTORS: SEE UPDATED LISTING ON OUR WEB PAGE WWW.FRMBIKE.BIZ

frm catálogo 2012

Documents