ft aniosept activ gb ranios.com/ebola/aniosept activ-fiche technique-00000-en.pdfaniosept activ...
TRANSCRIPT
ANIOSEPT ACTIV2 in 1: Cleaning disinfectantHigh level disinfectant/ Cold sterilization of medical devices
Cleaning disinfection and high level disinfection/cold sterilization of instruments and endoscopes, thermosensitive equipment.
• 2 in 1 powder: cleaning disinfection + high level disinfection/cold sterilization
• Wide antimicrobial spectrum in 15 minutes (sporicidal at 2%)
• Shelf-life: 2 years
• Perborate free formulation
• Dilution control with specific test strips
INDICATIONS
CHARACTERISTICS• Powder liberating of peracetic acid• White powder with thin granulometry• Hygroscopic powder (keep in a dry place)• Ensure that the seal is fully closed between each use• Slightly perfumed• pH of diluted product (1%): approx. 8.5TO BE DILUTED
0,5%2% to
ANIOSEPT ACTIV
Powder based on sodium percarbonate, tetraacetyl-ethylenediamine and N-alkyl(C12-14)-N-benzyl-N,N-dimethylammonium chloride. Extemporaneous production of peracetic acid when diluted in water.
2 in 1 Cleaning disinfectant, High level disinfectant/Cold sterilization of medical devices
Dissolve 25, 50 or 100g in 5 L of water according to the required concentration(1)
Totally soak the medical device (contact time : refer to microbiological properties). Brush and make circulate solution inside channels
Immerse completely the medical device previously cleaned. Irrigate the channels with the solutions.
Dissolve 25, 50 or 100 gin 5 L of water(1)
Rinse very thoroughly with sterile or filtered water
Dry the medical device with a sterile towel and aseptically store.
Rinse thoroughly the medical device with tap water (good microbiological quality).For endoscopic equipment: external and internal parts.
A- Cleaning disinfection:
B- High level disinfection/Cold sterilization:
INSTRUCTIONS FOR USE
COMPOSITION
Dangerous. Follow the instructions for use (Drawn up accordingto the European rules in force regarding the classification and labelling of chemical products). Storage: from +5°C to +30°C.Class IIb medical device (Directive 93/42/EEC as amended)
PRECAUTIONS FOR USE
24 pots, 100 g each...........Ref 1896.7344 buckets, 1 kg each.........Ref 1896.7332 buckets, 5 kg each.........Ref 1896.432
PACKAGING
GB1896– 131014 - Noncontratual photographies
Pavé du Moulin59260 Lille-Hellemmes - FranceTél. +33 3 20 67 67 67 - Fax : +33 3 20 67 67 68www.anios.com
34
3 4
1
1
> Thermosensitive equipment: Go to following step (see internal establishment procedure)
> Equipment suitable for autoclave: Thoroughly dry with a clean towel and go to the following step (see internal establishment procedure).
(1) Before soaking instrumentation,control the dilution with a test strip.One dosing spoon = 25 g
2
2etel
2 inCol
MICROBIOLOGICAL PROPERTIESResults described in the table here-below correspond to testsrealised in dirty conditions: Cleaning disinfectant
Requireddisinfection level
Contact time according to the concentration in ANIOSEPT ACTIV
LOWbactericide,yeasticide
0,5 % 1 % 2 %
INTERMEDIATEbactericide, fungicide, virucide, tuberculocide
5 minutes 5 minutes -
60 minutes 30 minutes 15 minutes
Results described in the table here-below correspond to testsrealised in clean conditions: High level disinfectant/Cold sterilization
Requireddisinfection level
Contact time according to the concentration in ANIOSEPT ACTIV
HIGHbactericide,fungicide, virucide,mycobactericide,sporicide
0,5 % 1 %
90 minutes 60 minutes 15 minutes
2 %896.734896.733896.432
du Moulin0 Lille-Hellemm33 3 20 67 67 677 Fax : +33 3 20 67 67 68
bactfungmycspor
mes - France7 Fax : +33 3 20 67
1
1
2
2