full mortise template hinges sizes 4 1/2” x 4”, 4 1… · lawrence template for 3 & 5...
TRANSCRIPT
Full Mortise Template Hinges
SIZES 4 1/2” X 4”, 4 1/2”, 5”, 6” 7”, 8.
All dimensions are in inches.
Machine screw size - 12-24 X 1/2” F.H.
Wood Screw size - 12 X 1-1/4 F.H.
Lawrence template hinges conform to Ansi A156.7
.180 45/64 1 9/16 1 13/16 2 1/16 2 9/16 3 1/16 3 9/16
LH603BB, LH179BB AND LH191BB STANDARD WEIGHT
Lawrence - 4.5” X4”X3.4mm, 2B, 5K
Full Mortise Template Hinge
SCALE
UNIT
MATERIAL
TEL:021-57796363
FAX:021-57796322
MM[inch]
SEE“NOTES”
DWG.NO.
DATE
TITLE APPROVE BY
A0
2015.4.02
DRAWD BYCHECKED BY
noneLIU CHUNYAN
9.53 [0.375"]
57.15 [2.250"]
114.30±0.38[4.500"±0.015"]
25.40 [1.000"]
3.40±0.13[0.134"±0.005"]
LIN LIZHUDING KUNLIN
2
1
1
DESCRIPTIONQTY.
3
2
1
MATERIAL
5
12.90 [0.508"]
28.58[1.125"]
31.34 [1.234"]
28.58[1.125"]
12.90 [0.508"]
114.30 .
[4.500" ]
+0-0.38
+0-0.015"
84
1.59±0.38[1/16"±0.015"]
DWG. NO.
NOTE:1. MATERIAL: 0.134"±0.005" TH. STEEL: SPCC COLD ROLLED STEEL, HARDNESS HRB ≥80°. S.STEEL: TYPE 304,COLD ROLLED,ANNEALED. HARDNESS HRB ≥80°. BRASS: H62, FLAT SHEET, HALF HARD.2. DIMENSIONS IN [ ] ARE INCH;3. HOLE SPACING TOLERANCE IS ±0.13MM[0.005"]4. UNLESS SPECIFIED TOLERANCE
IS ±0.25MM[0.01"]
R58" or R1
4" or SQ
LH603BB, LH179BB AND LH191BB STANDARD WEIGHT
Lawrence - 4.5” X4.5”X3.4mm, 2B, 5K
Full Mortise Template Hinge
LH168BB AND LH199BB HEAVY WEIGHT
Lawrence - 4.5” X4”X4.6mm, 4B, 5K
Full Mortise Template Hinge
LH1379CB AND LH1391CB STANDARD WEIGHT
Lawrence - 4.5” (3.4mm) 2B, 3K
Full Mortise Template Hinge
LH1379CB AND LH1391CB STANDARD WEIGHT
Lawrence - 4.5” (4.6mm) 2B, 3K
Full Mortise Template Hinge
LH1379CB AND LH1391CB HEAVY WEIGHTLH1368CB AND LH1399CB HEAVY WEIGHT
Phone1-800-435-9568 www.lawrencehardware.com Fax1-800-892-7026
LawrenceTemplatefor3&5knuckle5”hightemplatehinge
Thicknessofmaterial0.190or4.8mm
5 x 4, 5 x 41/2, 5 x 5, 5 x 7, 5 x 8Full Mortise Template Hinges
Copyright © 2015 McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited. 035-15 10/15
McKinney Products CompanyBerlin, CT 06037Phone: 800.346.7707 • Fax: 800.541.1073www.mckinneyhinge.com • [email protected]
Template 035-15
Effective date:September 1, 2015
Supercedes: All Previous
McKINNEY Template Hinges of the Catalog Numbers are made to conform to ANSI/BHMA 156.7.
Hospital Type Template Hinges conform to screw hole locations shown.
Machine Screw Size:1/2 x 12-24 F.H.
Wood Screw Size:11/4 x 12 F.H.
*Check Catalog for Metals.
**Dimensions will be supplied upon request.
***Round Corner Option is available with 1/4 (6.3) or 5/8 (15.9) radii. If none is specifi ed 1/4 (6.3) will be supplied.
DO NOT SCALEDIMENSIONS: INCHES (MM)
5 x 4, 5 x 41/2, 5 x 5, 5 x 7, 5 x 8Full Mortise Template Hinges
Copyright © 2015 McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited. 035-15 10/15
McKinney Products CompanyBerlin, CT 06037Phone: 800.346.7707 • Fax: 800.541.1073www.mckinneyhinge.com • [email protected]
Template 035-15
Effective date:September 1, 2015
Supercedes: All Previous
McKINNEY Template Hinges of the Catalog Numbers are made to conform to ANSI/BHMA 156.7.
Hospital Type Template Hinges conform to screw hole locations shown.
Machine Screw Size:1/2 x 12-24 F.H.
Wood Screw Size:11/4 x 12 F.H.
*Check Catalog for Metals.
**Dimensions will be supplied upon request.
***Round Corner Option is available with 1/4 (6.3) or 5/8 (15.9) radii. If none is specifi ed 1/4 (6.3) will be supplied.
DO NOT SCALEDIMENSIONS: INCHES (MM)