gbm solutions blaugelb collection

1Our general terms & conditions apply · We reserve the right to make changes without further notice

Bauchemie

Product range2014/15

Middle East

Our brand blaugelb® is the exclusive trademark of the gb meesenburg group.

We offer high quality branded products - suitable for both crafting and industrial companies. The products are available in a range of different finishes and in many combinations which makes the blaugelb® brand very ver-satile.

Try blaugelb®! It will prove that blaugelb® is always a good alternative.

blaugelb® products are designed for heavy use and is therefore also suitable for high traffic areas. The products include every

imaginable product for the door and window such as door le-vers, locks, pull handles, hinges, doorstops etc. and the range of products are con stantly being developed and new products added to ensure that we can supply every product around the door and window.

For more information on products from GBM Solutions and gb meesenburg please visit our catalouge section on our website: www.gbm-solutions.com or use the QR code below.

We are behindour brand!

imaginable product for the door and window such as door levers, locks, pull handles, hinges, doorstops etc. and the range of products are conadded to ensure that we can supply every product around the door and window.

For more information on products from GBM Solutions


2

3

4

5

Martin Meesenburg Owner of gb Meesenburg OHG andChairman of GBM Solutions

“The need for supplying added value to the parties in the building process have grown significantly over the past few years.

With a wide range of manufacturers establishing themselves directly in the mar-ket the customers are demanding more independent parties that can add relia-ble value to the project on a broad spectrum of products. At the same time the need for having a “full service” partner that will take responsibility - not only specifying and delivering the products - but also carry out installation and after service is in high demand.

gb meesenburg has been in the business for more than 250 years and know exactly what our partners and customers are looking for in a supplier - we care about YOUR business and take pride in delivering beyond what our customers expect from us, which has made us a preferred partner in the industry.”

Colour coding & finishes

SSS - Satin stainlees steel

PPS - Polished stainlees steel

BR - Brass

AB - Antique brass

BO - Bronze

Many of our products are available in both satin stainless steel and polished stainless steel or in the silver-like aluminium finish that grows more and more popular. For the classic look, the brass products are always in demand and with the different finish-es in either brass, polished brass or antique look we guarantee we are able to find the right solution for you. In addition, we also have several products in bronze for the more reddish, warm glow.

Some of our products are available in even more fin-ishes than we have in our catalogue - please feel free to ask if you require a specific finish, but cannot find it here.

PVD Coating

PVD is the abbreviation of Physical Vapor Deposition. It is a process carried out in high vacuum at tempera-tures between 150 and 500 °C.

PVD coatings benefits are many. PVD can provide a lifetime of protection from daily cleaning, which adds durability and value to your product. Traditional elec-troplating of brass, nickel, and gold finishes require a clear coat that degrade with time and can easily tarnish or corrode. PVD requires no clear top coats that fade or dull. It is four times harder than chrome which makes it corrosion and scratch resistant.GBM Solutions supply products in standard brass, antique brass and bronze with PVD coating, however more than a 1.000 colour variations are possible.

AL - Aluminium

PB - Polished brass


Section 1 ‑ Lever & Pull handles

Lever handles, Escutcheons, Pull handles ............................................................................................. P. 8 - 23

Section 2 ‑ Door operation & Access solutions

Hinges, Cylinders, Lock cases ............................................................................................................. S. 24 - 31

Section 3 ‑ Furniture fittings

Cabinet handles, Cabinet knobs, Flush pulls ....................................................................................... S. 32 - 39

Section 4 ‑ Accessories

Door securities, Seals, Door stops, Flush bolts, Window handles, Hooks & Hangers, Pictograms,

Letters & Numbers, Door closers, Push & Pull plates ......................................................................... S. 40 - 55

Section 5 ‑ General Information

Who we are, Contact information, General terms & Conditions, Notes .............................................. S. 56 - 63

2

3

4

5

1

2

3

4

5

6 Our general terms & conditions apply · We reserve the right to make changes without further notice


1

Lever & Pull handles

Section 1

Lever handles

Escutcheons

Pull handles


1


blaugelb® lever handle 19 mm hollow tube bend mitred shape, pair 8x8 mm, snap on cover rose ø52 mm and 8 mm high, cc 38 mm, for door thickness 33-59 mm, satin stainless steel AISI 304, supplied with M4 section bolts and fixing bush.

blaugelb® Lever handle 1010.000x.PZ

blaugelb® lever handle 19 mm hollow tube bend mitred shape, pair 8x8 mm, snap on cover rose ø52 mm and 8 mm high, cc 38 mm, for door thickness 33-59 mm, satin stainless steel AISI 304, supplied with M4 section bolts and fixing bush.

blaugelb® Lever handle 1010.000x.WC

blaugelb® lever handle 19 mm hollow tube bend T shape, pair 8x8 mm, snap on cover rose ø52 mm and 8 mm high, cc 38 mm, for door thickness 33-59 mm, satin stainless steel AISI 304, supplied with M4 section bolts and fixing bush.


Item No. Certification Lenght Rose

1010.000A.PZ Class 0 152 mm 52 mm

1010.000B.PZ Class 2 152 mm 52 mm

1010.000C.PZ Class 3 152 mm 52 mm


1010.000A.WC Class 0 152 mm 52 mm

1010.000B.WC Class 2 152 mm 52 mm

1010.000C.WC Class 3 152 mm 52 mm


1010.001A.PZ Class 0 135 mm 52 mm

1010.001B.PZ Class 2 135 mm 52 mm

1010.001C.PZ Class 3 135 mm 52 mm


1


blaugelb® lever handle 19 mm hollow tube bend T shape, pair 8x8 mm, snap on cover rose ø52 mm and 8 mm high, cc 38 mm, for door thickness 33-59 mm, satin stainless steel AISI 304, supplied with M4 section bolts and fixing bush.


blaugelb® lever handle 19 mm hollow tube L shape, pair 8x8 mm, snap on cover rose ø52 mm and 8 mm high, cc 38 mm, for door thickness 33-59 mm, satin stainless steel AISI 304, supplied with M4 section bolts and fixing bush.


blaugelb® lever handle 19 mm hollow tube L shape, pair 8x8 mm, snap on cover rose ø52 mm and 8 mm high, cc 38 mm, for door thickness 33-59 mm, satin stainless steel AISI 304, supplied with M4 section bolts and fixing bush.



1010.001A.WC Class 0 135 mm 52 mm

1010.001B.WC Class 2 135 mm 52 mm

1010.001C.WC Class 3 135 mm 52 mm


1010.002A.PZ Class 0 135 mm 52 mm

1010.002B.PZ Class 2 135 mm 52 mm

1010.002C.PZ Class 3 135 mm 52 mm


1010.002A.WC Class 0 135 mm 52 mm

1010.002B.WC Class 2 135 mm 52 mm

1010.0012.WC Class 3 135 mm 52 mm


1blaugelb® lever handle 19 mm hollow tube mitred shape, pair 8x8 mm, snap on cover rose ø52 mm and 8 mm high, cc 38 mm, for door thickness 33-59 mm, satin stainless steel AISI 304, supplied with M4 section bolts and fixing bush.


blaugelb® lever handle 19 mm hollow tube mitred shape, pair 8x8 mm, snap on cover rose ø52 mm and 8 mm high, cc 38 mm, for door thickness 33-59 mm, satin stainless steel AISI 304, supplied with M4 section bolts and fixing bush.


blaugelb® lever handle 19 mm hollow tube U shape, pair 8x8 mm, snap on cover rose ø52 mm and 8 mm high, cc 38 mm, for door thickness 33-59 mm, satin stainless steel AISI 304, supplied with M4 section bolts and fixing bush.



1010.003A.PZ Class 0 135 mm 52 mm

1010.003B.PZ Class 2 135 mm 52 mm

1010.003C.PZ Class 3 135 mm 52 mm


1010.003A.WC Class 0 135 mm 52 mm

1010.003B.WC Class 2 135 mm 52 mm

1010.003C.WC Class 3 135 mm 52 mm


1010.004A.PZ Class 0 135 mm 52 mm

1010.004B.PZ Class 2 135 mm 52 mm

1010.004C.PZ Class 3 135 mm 52 mm



1blaugelb® lever handle 19 mm hollow tube bend T shape, pair 8x8 mm, snap on cover rose ø52 mm and 8 mm high, cc 38 mm, for door thickness 33-59 mm, satin stainless steel AISI 304, supplied with M4 section bolts and fixing bush.


blaugelb® ball knob, hollow, pair 8x8 mm, snap on cover rose ø56 mm and 8 mm high, cc 38 mm, for door thickness 33-59 mm, satin stainless steel AISI 304, supplied with M4 section bolts and fixing bush.

blaugelb® Ball knob 1010.005x.PZ

blaugelb® balll knob, hollow, pair 8x8 mm, snap on cover rose ø56 mm and 8 mm high, cc 38 mm, for door thickness 33-59 mm, satin stainless steel AISI 304, supplied with M4 section bolts and fixing bush.

blaugelb® Ball knob 1010.005x.WC


1010.004A.WC Class 0 135 mm 52 mm

1010.004B.WC Class 2 135 mm 52 mm

1010.004C.WC Class 3 135 mm 52 mm


1010.005A.PZ Class 0 86 mm 56 mm

1010.005B.PZ Class 2 86 mm 56 mm

1010.005C.PZ Class 3 86 mm 56 mm


1010.005A.WC Class 0 86 mm 56 mm

1010.005B.WC Class 2 86 mm 56 mm

1010.005C.WC Class 3 86 mm 56 mm



1blaugelb® lever handle, solid crinckle shape, pair 8x8 mm, snap on cover rose ø52 mm and 8 mm high, cc 38 mm, for door thickness 33-59 mm, satin stainless steel AISI 304, supplied with M4 section bolts and fixing bush.


blaugelb® lever handle, solid crinckle shape, pair 8x8 mm, snap on cover rose ø52 mm and 8 mm high, cc 38 mm, for door thickness 33-59 mm, satin stainless steel AISI 304, supplied with M4 section bolts and fixing bush.


blaugelb® lever handle, solid pattern shape, pair 8x8 mm, snap on cover rose ø52 mm and 8 mm high, cc 38 mm, for door thickness 33-59 mm, satin stainless steel AISI 304, supplied with M4 section bolts and fixing bush.



1010.008A.PZ Class 0 140 mm 52 mm

1010.008B.PZ Class 2 140 mm 52 mm

1010.008C.PZ Class 3 140 mm 52 mm


1010.008A.WC Class 0 140 mm 52 mm

1010.008B.WC Class 2 140 mm 52 mm

1010.008C.WC Class 3 140 mm 52 mm


1010.009A.PZ Class 0 135 mm 52 mm

1010.009B.PZ Class 2 135 mm 52 mm

1010.009C.PZ Class 3 135 mm 52 mm



1blaugelb® lever handle, solid pattern shape, pair 8x8 mm, snap on cover rose ø52 mm and 8 mm high, cc 38 mm, for door thickness 33-59 mm, satin stainless steel AISI 304, supplied with M4 section bolts and fixing bush.


blaugelb® lever handle, solid edged shape, pair 8x8 mm, snap on cover rose ø56 mm and 8 mm high, cc 38 mm, for door thickness 33-59 mm, satin stainless steel AISI 304, supplied with M4 section bolts and fixing bush.


blaugelb® lever handle, solid edged shape, pair 8x8 mm, snap on cover rose ø56 mm and 8 mm high, cc 38 mm, for door thickness 33-59 mm, satin stainless steel AISI 304, supplied with M4 section bolts and fixing bush.



1010.009A.WC Class 0 135 mm 52 mm

1010.009B.WC Class 2 135 mm 52 mm

1010.009C.WC Class 3 135 mm 52 mm


1010.010A.PZ Class 0 135 mm 52 mm

1010.010B.PZ Class 2 135 mm 52 mm

1010.010C.PZ Class 3 135 mm 52 mm


1010.010A.WC Class 0 135 mm 52 mm

1010.010B.WC Class 2 135 mm 52 mm

1010.010C.WC Class 3 135 mm 52 mm



1blaugelb® lever handle, solid straight T shape, pair 8x8 mm, snap on cover rose ø52 mm and 8 mm high, cc 38 mm, for door thickness 33-59 mm, satin stainless steel AISI 304, supplied with M4 section bolts and fixing bush.


blaugelb® lever handle, solid straight T shape, pair 8x8 mm, snap on cover rose ø52 mm and 8 mm high, cc 38 mm, for door thickness 33-59 mm, satin stainless steel AISI 304, supplied with M4 section bolts and fixing bush.


blaugelb® lever handle, solid wave shape, pair 8x8 mm, snap on cover rose ø52 mm and 8 mm high, cc 38 mm, for door thickness 33-59 mm, satin stainless steel AISI 304, supplied with M4 section bolts and fixing bush.



1010.011A.PZ Class 0 139 mm 52 mm

1010.011B.PZ Class 2 139 mm 52 mm

1010.011C.PZ Class 3 139 mm 52 mm


1010.011A.WC Class 0 139 mm 52 mm

1010.011B.WC Class 2 139 mm 52 mm

1010.011C.WC Class 3 139 mm 52 mm


1010.012A.PZ Class 0 125 mm 52 mm

1010.012B.PZ Class 2 125 mm 52 mm

1010.012C.PZ Class 3 125 mm 52 mm



1blaugelb® lever handle, solid wave shape, pair 8x8 mm, snap on cover rose ø52 mm and 8 mm high, cc 38 mm, for door thickness 33-59 mm, satin stainless steel AISI 304, supplied with M4 section bolts and fixing bush.


blaugelb® lever handle, dual finish, solid round shape, pair 8x8 mm, snap on cover rose ø56 mm and 8 mm high, cc 38 mm, for door thickness 33-59 mm, satin stainless steel/polished stainless steel AISI 304, supplied with M4 section bolts and fixing bush.


blaugelb® lever handle, dual finish, solid round shape, pair 8x8 mm, snap on cover rose ø56 mm and 8 mm high, cc 38 mm, for door thickness 33-59 mm, satin stainless steel/polished stainless steel AISI 304, supplied with M4 section bolts and fixing bush.



1010.012A.WC Class 0 125 mm 52 mm

1010.012B.WC Class 2 125 mm 52 mm

1010.012C.WC Class 3 125 mm 52 mm


1010.013A.PZ Class 0 135 mm 52 mm

1010.013B.PZ Class 2 135 mm 52 mm

1010.013C.PZ Class 3 135 mm 52 mm


1010.013A.WC Class 0 135 mm 52 mm

1010.013B.WC Class 2 135 mm 52 mm

1010.013C.WC Class 3 135 mm 52 mm



1


The escutcheons are made from satin stainless steel AISI 304. Distance between screw holes are 38 mm.

blaugelb® PZ cylinder escutcheons 1012.0000

blaugelb® Blind cylinder escutcheons 1012.0001

Item No. Certification Height Diameter

1012.0000 Class 0 8 mm 52 mm

The escutcheons are made from satin stainless steel AISI 304. Distance between screw holes are 38 mm.

Item No. Certification Height Diameter

1012.0000 Class 0 8 mm 52 mm


1


The toilet indicator set for special need is made from satin stainless steel AISI 304. Distance between screw holes are 38 mm, door thickness 30-45 mm. Thumb turn is extra long.

blaugelb® Toilet indicator set - special need 1012.0004x

The toilet indicator set is made from satin stainless steel AISI 304. Distance between screw holes are 38 mm, door thickness 30-45 mm.

blaugelb® Toilet indicator set 1012.0003x

Item No. Certification Height Diameter Indicator

1012.0003A Class 0 8 mm 52 mm No

1012.0003B Class 0 8 mm 52 mm Yes

Item No. Certification Height Diameter Indicator

1012.0004A Class 0 8 mm 52 mm No

1012.0004B Class 0 8 mm 52 mm Yes


1


The pull handles in the blaugelb® series are available in different dimensions and lenghts and can be mounted on both wooden, steel and glass doors with a selection of fixing pos-sibilities.

Pull handle 19 mm, straight, M8, satin stainless steel AISI 304.

blaugelb® Pull handle straight 19 mm 1014.000x

blaugelb® Pull handle straight 25 mm 1014.001x


Pull handle 25 mm, straight, M8, satin stainless steel AISI 304.

Item No. Dimension Lenght

1014.000A 19 mm 300 mm

1014.000B 19 mm 350 mm

1014.000C 19 mm 450 mm

1014.000D 19 mm 600 mm


1014.001A 25 mm 300 mm

1014.001B 25 mm 350 mm

1014.001C 25 mm 450 mm

1014.001D 25 mm 600 mm


1



Pull handle 25 mm, mitred, M8, satin stainless steel AISI 304.

blaugelb® Pull handle mitred 25 mm 1014.003x


Pull handle 19 mm, mitred, M8, satin stainless steel AISI 304.

blaugelb® Pull handle mitred 19 mm 1014.002x


1014.002A 19 mm 200 mm

1014.002B 19 mm 300 mm

1014.002C 19 mm 450 mm

1014.002D 19 mm 600 mm


1014.003A 25 mm 200 mm

1014.003B 25 mm 300 mm

1014.003C 25 mm 450 mm

1014.003D 25 mm 600 mm


1



Pull handle 19 mm, square, M8, satin stainless steel AISI 304.

blaugelb® Pull handle square 19 mm 1014.004x

blaugelb® Pull handle square 25 mm 1014.005x


Pull handle 25 mm, square, M8, satin stainless steel AISI 304.


1014.004A 19 mm 200 mm

1014.004B 19 mm 300 mm

1014.004C 19 mm 400 mm

1014.004D 19 mm 600 mm


1014.005A 25 mm 200 mm

1014.005B 25 mm 300 mm

1014.005C 25 mm 400 mm

1014.005D 25 mm 600 mm


1



Pull handle 25 mm, rectangular, M8, satin stainless steel AISI 304.

blaugelb® Pull handle rectangular 25 mm 1014.007x


Pull handle 19 mm, rectangular, M8, satin stainless steel AISI 304.

blaugelb® Pull handle rectangular 19 mm 1014.006x


1014.006A 19 mm 200 mm

1014.006B 19 mm 300 mm

1014.006C 19 mm 450 mm

1014.006D 19 mm 600 mm


1014.007A 25 mm 200 mm

1014.007B 25 mm 300 mm

1014.007C 25 mm 450 mm

1014.007D 25 mm 600 mm


1



Pull handle 19 mm, T shape, M8, satin stainless steel AISI 304.

blaugelb® Pull handle T shape 19 mm 1014.008x




Item No. Dimension cc Lenght

1014.008A 19 mm 225 mm 325 mm

1014.008B 19 mm 300 mm 400 mm


1014.008A 25 mm 225 mm 344 mm

1014.008B 25 mm 300 mm 419 mm

1014.008C 25 mm 450 mm 600 mm


1









1014.010A 30 mm 210 mm 350 mm

1014.010B 30 mm 210 mm 400 mm

1014.010C 30 mm 400 mm 600 mm

1014.010D 30 mm 600 mm 800 mm

1014.010E 30 mm 800 mm 1000 mm


1014.011A 32 mm 450 mm 600 mm

1014.011B 32 mm 600 mm 725 mm

1014.011C 32 mm 1000 mm 1250 mm


2

Door operation & Access solutions

Section 2

Hinges

Cylinders

Lock cases


2


blaugelb® high action ball bearing butt hinge suitable for sever duty applications and for usage on doors where high frequency is expected such as entrance doors to office buildings, stores, public buildings and corridor entrance doors to offices. In accordance with BS EN 1935, high performance butt hinge for wooden or metal doors.

Supplied in 3 different sizes.

Item No. EN 1935 Dimensions Door weight

1013.000A 476114013 102x76x3 mm 120 Kg

1013.000B 476114013 102x102x3 mm 120 Kg

1013.000C 476114013 114x102x3,4 mm 120 Kg

blaugelb® double action spring hinge for wooden doors and for flush wooden doors that swing in both directions. are typically used on institution doors, restaurant doors and bar doors that open in both directions.

Supplied in 3 different sizes.

Item No. Door height Door width Door thickness Door weight

1013.001A < 1800 mm < 600 mm 18 - 25 mm < 15 Kg

1013.001B < 2500 mm < 750 mm 35 - 40 mm < 27 Kg

1013.001C < 2500 mm < 750 mm 35 - 40 mm < 40 Kg

blaugelb® Ball bearing hinge 1013.000x

blaugelb® Single action spring hinge 1013.001x


2


blaugelb® single action spring hinge is for wooden or steel frames and for wooden or steel interior doors. Suitable for DIN right and DIN left.

blaugelb® Single action spring hinge 1013.0020

Item No. Knuckle Flange thiskness Flange width Door weight

1013.0020 18 mm 3,5 mm 40 mm < 60 Kg

blaugelb® single action spring hinge is for wooden or steel frames and for wooden or steel interior doors. Suitable for DIN right and DIN left.

blaugelb® Single action spring hinge 1013.0021

Item No. Knuckle Flange thiskness Flange width Door weight

1013.0021 18 mm 3,5 mm 40 mm < 60 Kg


2


blaugelb® PZ doublle cylinder, solid brass body. Satin nickel plated or satin brass finish. 6 pins/sliders. Nickel silver key incl. Minimum lenght 30 mm.

blaugelb® PZ half cylinder, solid brass body. Satin nickel plated or satin brass finish. 6 pins/sliders. Nickel silver key incl. Minimum lenght 45 mm.

blaugelb® PZ double cylinder 1016.006DZx

blaugelb® PZ half cylinder 1016.007HZ

Item No. Lenght

1016.006DZ60 30/30

1016.006DZ70 35/35

1016.006DZ80 40/40

1016.006DZ90 45/45

Item No. Lenght

1016.007HZ 45

Our general terms & conditions apply · We reserve the right to make changes without further notice


blaugelb® PZ thumb turn cylinder, solid brass body. Satin nickel plated or satin brass finish. 6 pins/sliders. Nickel silver key incl. Minimum lenght 30 mm.

blaugelb® PZ thumb turn cylinder 1016.011TZx

blaugelb® WC thumb turn cylinder, solid brass body. Satin nickel plated or satin brass finish. 6 pins/sliders. Nickel silver key incl. Minimum lenght 30 mm.

blaugelb® WC thumb turn cylinder 1016.012TZWCx

Item No. Lenght

1016.011TZ60 30/30

1016.011TZ70 35/35

1016.011TZ80 40/40

1016.011TZ90 45/45

Item No. Lenght

1016.012TZWC60 30/30

1016.012TZWC70 35/35

1016.012TZWC80 40/40

1016.012TZWC90 45/45

29

2


2

blaugelb® mortice latchlock with reversable latchbolt, for inner doors with reversable latch. The lockcase is made of steel with latch and deadbolt of steel and forend in stianless steel. Finish is either stiainless steel or brass. For either DIN left or right handed doors.

Backset is 55 mm.Leverfollower is 8 mm. Deadbolt is with 2 throw.Forenend is either rounded or square - 24 mm.

blaugelb® Bathroom lock 1015.1000


Backset is 55 mm. Leverfollower is 8 mm. Deadbolt is with 2 throw.Forenend is either rounded or square - 24 mm.

blaugelb® Deadlock 1015.1001



blaugelb® Latchlock 1015.1002


Item No. Center to center Compatibility Key action

1015.1000 78 mm WC Rose -


1015.1001 72 mm PZ Cylinder -


1015.1002 72 mm PZ Cylinder On latchbolt



2



blaugelb® Sashlock 1015.1003



blaugelb® Sashlock 1015.1004 - NON FIRE RATED

blaugelb® heavt duty roller latch for swing doors. Non lockable. Forende is square - 22 mm.

blaugelb® Roller latch 1015.1005







3

Furniture fittings

Section 3

Cabinet handels

Cabinet knobs

Flush pulls


3

Furniture fittings

blaugelb® cabinet handles are manufactured in stainless steel for the elegant, simple yet functional look on any cabinet or drawer. The hygienic benefits of stainless steel makes the handles ideal for use in kitchens and bathrooms.

Different designs, shapes and sizes ensures we can supply you with a handle that will cover your specific need.



blaugelb® T shape 1030.0000x

blaugelb® U shape 1030.0001x

Item No. Diameter cc Lenght

1030.0000A 12 mm 96 mm 156 mm

1030.0000B 12 mm 128 mm 188 mm

1030.0000C 12 mm 160 mm 220 mm

1030.0000D 12 mm 192 mm 252 mm

Item No. Diameter cc

1030.0001A 12 mm 96 mm

1030.0001B 12 mm 128 mm

1030.0001C 12 mm 160 mm

1030.0001D 12 mm 192 mm


3

Furniture fittings



blaugelb® Edged U shape 1030.0002



blaugelb® FH 102 1030.0003x


1030.0002 14 mm 96 mm 110 mm

Item No. Diameter cc

1030.0003A 12 mm 64 mm

1030.0003B 12 mm 96 mm

1030.0003C 12 mm 128 mm

1030.0003D 12 mm 160 mm


3

Furniture fittings






blaugelb® FH 105 1030.0006


1030.0004A 12 mm 96 mm 108 mm

1030.0004B 12 mm 128 mm 140 mm

1030.0004C 12 mm 160 mm 172 mm

1030.0004D 12 mm 192 mm 204 mm


1030.0006 10 mm 256 mm 268 mm


3

Furniture fittings




Item No. Diameter Lenght

1030.0005A 10 mm 24 mm

1030.0005B 15 mm 26 mm

1030.0005C 20 mm 28 mm

1030.0005D 25 mm 30 mm


3

blaugelb® flush pulls are made from stainless steel in grade AISI 304. Different shapes and sizes ensures that we can deliver a flush pull to suit any design-need you may have.

blaugelb® Oval flush pull 1022.0000


blaugelb® Square flush pull 1022.0001


blaugelb® Round flush pull 1022.0002

Item No. Certification Dimension Height

1022.0000 Class 0 50x102 mm 8 mm

Furniture fittings


1022.0001 Class 0 52x102 mm 8 mm


1022.0002 Class 0 70 mm 13 mm


3


blaugelb® Cup pull 1022.0003


blaugelb® Euro cylinder pull 1022.0004

Furniture fittings


1022.0003 Class 0 70 mm 17 mm

Item No. Certification Dimension

1022.0004 Class 0 43x80 mm

40 Es gelten unsere Allgemeinen Geschäftsbedingungen · Irrtümer und Änderungen vorbehalten

41Es gelten unsere Allgemeinen Geschäftsbedingungen · Irrtümer und Änderungen vorbehalten

4

Accessories

Section 4

Door security

Seals

Door stops

Flush bolts

Window handles

Door closers

Hooks & Hangers

Letters, Numbers & Pictograms

Push & Pull plates


4

blaugelb® door chain in satin stainless steel.To ensure unwanted entry through the front door the different styled door chains from our collection is giving our customers the possibility to choose just the right design and finish to suit their project.

blaugelb® Door chain 1023.0000

blaugelb® door chain in satin stainless steel with black leather chain cover.To ensure unwanted entry through the front door the different styled door chains from our collection is giving our customers the possibility to choose just the right design and finish to suit their project.

blaugelb® Door chain with black leather 1023.0001

blaugelb® door guard.To ensure unwanted entry through the front door the different styled door chains from our collection is giving our customers the possibility to choose just the right design and finish to suit their project.

blaugelb® Door guard 1023.0002

Accessories


4

blaugelb® Concealed door guard are made from stainless steel in grade AISI 304. To ensure unwanted entry through the front door the different styled door chains from our collection is giving our customers the possibility to choose just the right design and finish to suit their project.

blaugelb® Concealed door chain 1023.0003

blaugelb® door viewer is made from satin stainless steel in grade AISI 304. With the simple and functional design it will suit any door material or colour.

blaugelb® Door viewer 1023.0004

Accessories

Item No. View angle Dimension Lenght

1023.0004 180 ˚ 26 mm 45 mm

blaugelb® seal is an automatic drop seal for single and double-wing/folding doors made of wood, plastic and metal plus sliding doors, accordion- and partition walls as well, for sound protection- and smoke-shielding doors,release on hinge side with automatic compensation in case of an inclined floor, parallel drop-down, seal lift height up to 16 mm, flush or deeper to put in groove with lip protection. Silicone lip, fastening from the side, aluminum profile 13x25 mm.

blaugelb® KT Drop seal 1029.0300x

Item No. Dimensions

1029.0300A 710 mm

1029.0300B 835 mm

1029.0300C 960 mm

1029.0300D 1085 mm


4

blaugelb® interior door stops are made from AISI grade 304 steel and are useable in many settings due to the versatile selection of shapes and sizes. The blaugelb® collection of interior door stops includes both floor and wall door stops.

blaugelb® Floor door stop Hockey puck 1020.0000


blaugelb® Floor door stop Iglu 1020.0001


blaugelb® Floor door stop Dome 1020.0002

Accessories

Item No. Dimension Height

1020.0000 89 mm 32 mm


1020.0001 64 mm 22 mm


1020.0002 64 mm 22 mm


4

blaugelb® door stops are made from AISI grade 304 steel and are useable in many settings due to the versatile selection of shapes and sizes.

The blaugelb® collection of door stops also includes, foot operated and heavy duty door stops. The foot operated and heavy duty door stops are made from zink and works with smooth functionallity.

blaugelb® Floor door stop Small 1020.0003


The blaugelb® collection of doors tops also includes, foot operated and heavy duty door stops. The foot operated and heavy duty door stops are made from zink and works with smooth functionallity.

blaugelb® Foot operated door stop 1020.0004

Accessories



blaugelb® Foot operated door stop 1020.0005


1020.0003 30 mm 40 mm

Item No. Max throw Height Colour

1020.0004 30 mm 180 mm Silver

Item No. Max throw Height Colour

1020.0005 60 mm 180 mm Silver


4

Accessories





blaugelb® Heavy duty door stop 1020.0006

blaugelb® Heavy duty door stop 1020.0007

Item No. Door weight Door width Door height Colour

1020.0006 120 kg 1000 mm 2200 mm Silver

Item No. Door weight Door width Door height Colour

1020.0007 120 kg 1000 mm 2200 mm Silver


4

blaugelb® wall door stops are made from AISI grade 304 steel and are useable in many settings due to the versatile selection of shapes and sizes.

blaugelb® Wall door stop without rose 1020.0008x


blaugelb® Wall door stop with rose 1020.0009

Accessories


blaugelb® Wall door stop with pin 1020.0010


1020.0008A 30 mm 60 mm

1020.0008B 30 mm 90 mm

1020.0008C 30 mm 120 mm

Item No. Dimension Rose Lenght

1020.0009 16 mm 50 mm 80 mm

Item No. Dimension Rose Lenght

1020.0010 16 mm 50 mm 80 mm


4

blaugelb® stainless steel flush bolt for timber doors.

blaugelb® Flush bolt for timber doors 1021.0000x

blaugelb® stainless steel flush bolt for metal doors.

blaugelb® Flush bolt for metal doors 1021.0001x

blaugelb® dust socket.

blaugelb® Dust socket 1021.0002

Accessories

Item No. Width Lenght

1021.0000A 20 mm 150 mm

1021.0000B 20 mm 200 mm

1021.0000C 20 mm 300 mm

1021.0000D 25 mm 200 mm

1021.0000E 25 mm 300 mm


1021.0002 25 mm 38 mm


1021.0001A 25 mm 200 mm

1021.0001B 25 mm 300 mm


4

blaugelb® window handles are made from AISI grade 304 steel. As with all stainless steel products in our blaugelb® range - the sleek and functional design ensures great usability and easy maintenance.

blaugelb® Window handle L shape 1026.0000


blaugelb® Window handle U shape 1026.0001

Accessories


blaugelb® Window handle Mittred 1026.0002

Item No. Diameter Spindle cc

1026.0000 16 mm 8x35 mm 43 mm


1026.0001 16 mm 8x35 mm 43 mm


1026.0002 16 mm 8x35 mm 43 mm


4

blaugelb® hooks and hangers for the wardrobe or the bathroom/toilet area. Our hooks and hangers are made from stainless steel AISI 304 for durability and a long life span.

blaugelb® Double hook - Bend - 1023.0006


blaugelb® Double hook - Straight - 1023.0007


blaugelb® Dust socket 1021.0002

Accessories

Item No. Rose Lenght Diameter

1023.0006 48 mm 180 mm 6 mm

Item No. Rose Lenght Diameter

1023.0007 48 mm 100 mm 6 mm

Item No. Rose Projection Diameter

1023.0008 32 mm 45 mm 6 mm


4


blaugelb® Window handle L shape 1026.0000


blaugelb® Hanger 1023.0010x

Accessories

blaugelb® pictograms are supplied with self adhesive tape, but also have screw holes for mounting so either can be used in fitting.

blaugelb® Pictograms 1023.0005x

Item No. Diameter Version

1023.0010A 14 mm Fixed

1023.0010B 14 mm Turnable

Item No. Diameter Version

1023.0005A 50 mm Female

1023.0005B 50 mm Male

1023.0005C 50 mm Unisex

Item No. Rose Projection Diameter

1023.0009 35 mm 43 mm 14 mm


4

blaugelb® rounded selction of letters and numerals are modern and timeless in their expres-sion and can be used in any setting.

blaugelb® Letters - Rounded shape 1024.0000x

blaugelb® rounded selction of letters and numerals are modern and timeless in their expres-sion and can be used in any setting.

blaugelb® Numbers - Rounded shape 1024.0001x

Accessories

Item No. Letter Hight Width

1023.0000A a 115 mm 96 mm

1023.0000B b 147 mm 85 mm

1023.0000C c 115 mm 96 mm

1023.0000D d 147 mm 85 mm

Item No. Number Hight Width

1023.00010 0 155 mm 100 mm

1023.00011 1 155 mm 100 mm

1023.00012 2 155 mm 100 mm

1023.00013 3 155 mm 100 mm

1023.00014 4 155 mm 100 mm

1023.00015 5 155 mm 100 mm

1023.00016 6 155 mm 100 mm

1023.00017 7 155 mm 100 mm

1023.00018 8 155 mm 100 mm

1023.00019 9 155 mm 100 mm


4

blaugelb® Staccato letters 1024.0002x

Accessories

blaugelb® standard arm door closer - certified in compliance with EN 1154, size 2-4, can be used for left and right-handed doors, suitable for fire and smoke protection doors. Opening angle 180˚.

blaugelb® Door closer 1018.0000

Item No. Max Leaf width Max leaf weight Power size Latching speed Closing force Closing speed

1018.0000 1100 mm 80 Kg EN 2-4 Adjustable Adjustable Adjustable


1023.00020 0 150 mm 100 mm

1023.00021 1 150 mm 100 mm

1023.00022 2 150 mm 100 mm

1023.00023 3 150 mm 100 mm

1023.00024 4 150 mm 100 mm

1023.00025 5 150 mm 100 mm

1023.00026 6 150 mm 100 mm

1023.00027 7 150 mm 100 mm

1023.00028 8 150 mm 100 mm

1023.00029 9 150 mm 100 mm

blaugelb® Staccato font letters and numerals are slender and light with a more twisted design.


1023.0002A a 150 mm 100 mm

1023.0002B b 150 mm 100 mm

1023.0002C c 150 mm 100 mm

1023.0002D d 150 mm 100 mm

1023.0002E e 150 mm 100 mm

blaugelb® Staccato font letters and numerals are slender and light with a more twisted design.

blaugelb® Staccato numbers 1024.0002x


4

Accessories

blaugelb® push and pull plates are made from stainless steel AISI 304.

blaugelb® push and pull plates are made from stainless steel AISI 304.Push engraved in black lettering.

blaugelb® Push plate 1025.0000x

blaugelb® Push plate engraved 1025.0001x


1025.0000A 100 mm 300 mm

1025.0000B 100 mm 350 mm

1025.0000C 100 mm 400 mm

1025.0000D 100 mm 600 mm


1025.0001A 100 mm 300 mm

1025.0001B 100 mm 350 mm


4

Accessories

blaugelb® push and pull plates are made from stainless steel AISI 304.Pull engraved in black lettering with 19 mm pull handle mounted on plate below.

blaugelb® Pull plate engraved 1025.0002x


1025.0002A 100 mm 350 mm

1025.0002B 100 mm 425 mm


5

General Information

Section 5

Who we are

Contact information

General terms & conditions


GBM Solutions

GBM Solutions is part of the Meesenburg KG group which can already look back on over 250 years of company history. The company was founded in Flensburg, Germany in 1758, making it one of the oldest trading companies in northern Germany. We are still a family owned and run business and is now one of the market leaders within our field.

A very varied range of products, a high service level, fair prices, individual, benefit-focused care - especially through the region-al branches - and an extensive range of services are the per-formance characteristics that define us. Our core values have brought us a long way and we are today employing more than a 1.000 people in regional offices in more than 10 countries, which places us among the biggest companies in our industry in Europe.

Global presence ‑ Local awareness

Our organization in support of your projects is a combination of skilled and experienced specification and procurement man-agers that, from our headquarters coordinate the specification and supply of products.

Whatever, whenever and whereever you need it

When partnering with GBM Solutions you and your projects will be in safe hands. The benefits include

• 250 years of history providing quality products and service to our customers

• Local presence in Europe. Middle East and Asia.• One of the largest independent suppliers of Architectural

Ironmongery and Bathroom Fittings in Europe• Technical support before, during and after specification• A comprehensive range of European and US suppliers • Joint delivery of all related building elements and products• A total solution partner that takes full responsibility of the

specification, procurement and installation process from start to finish

• A skilled, reliable and dedicated team of employees to sup-port you

Who we are

5


GBM Solutions offices

At GBM Solutions we are there for you at any stage in your building project.

For dedicated expert assistance and service - or just to provide you with more information on what we can do for you and your business - you are welcome to contact one of our worldwide offices for further information or visit our website: www.gbm-solutions.com

You find us here

Middle East & AfricaGBM Solutions LLC.U-Bora Tower 2, Business Bay6th Floor – Unit 607, P.O Box. 117211Dubai United Arab EmiratesPhone +971 4 277 6433Fax +971 4 277 [email protected]

Head officeGBM SolutionsØrestads Boluevard 732300 København SDenmarkPhone +45 8896 9550Fax +45 8896 [email protected]

AsiaGBM SolutionsB11 L23/25 St. Monique ValaisBinangonan, RizalPhilippines 1940Phone: +63 [email protected]

EuropeGBM SolutionsWesterallee 16224941 FlensburgGermanyPhone +49 461 58080Fax +49 461 58080 [email protected]

5

GBM Solution – Abu DhabiPhone +971 50 642 [email protected]

GBM Solution – Saudi Arabia, Riyadh & JeddahPhone: +966 56 633 [email protected]


Terms & Conditions

8.Deviating from Sections 366 and 367 of the German Civil Code, payments by the purchaser will be credited to the oldest account receivable first.9.If the purchaser fails to fulfil its payment obligations, the vendor will be entitled to declare the entire remaining debt due. The vendor will also be entitled to demand advance payment or security for deliveries already made and for all supplies of goods and services or parts thereof.10.The vendor is entitled to assign the claims arising from our business relationship.

IV. Delivery Period1.Delivery dates and periods are deemed to have been agreed to as being only approximate unless the vendor has expressly given a written assurance that they are binding.2.The delivery period will be extended as appropriate in cases of Acts of God, industrial unrest, civil commotion, official measures, failure by our suppliers to make deliveries and other unforeseeable, unavoidable and serious events for the duration of the disruption. The vendor is obliged as far as possible to supply the required information immediately and to adapt its obligations to the altered situation in good faith.3.Partial deliveries are permitted to a reasonable extent and if this seems advan-tageous for rapid handling. 4.Risk transfers to the vendor when the vendor supplies the goods at the agreed place of delivery.5.Exceeding certain delivery periods and dates will not release the purchaser, who may cancel the agreement or demand damages for non-fulfilment, from setting an appropriate, extension period, usually 14 days, for supplying the service and declaring that it will decline the service after the extension period has expired. If the vendor is only responsible for minor negligence, damages will be limited to the extra expense incurred for emergency purchases or replacement goods.

V. Notice of Defects, Warranty and Guarantee1.Except in cases of assured characteristics or culpable breach of essential contrac-tual obligations, we are liable for defective deliveries excluding further claims as follows: a. Statutory guarantee periods apply to all goods at the moment of the transfer of risk. Where the goods are used commercially or professionally, the guarantee period will be 12 months. If improve- ments or replacement deliveries are made under the terms of the warranty, this will not trigger a new guarantee period. b. The warranty for used goods will be 12 months as from the transfer of risk if these are used privately. The warranty will not apply to goods used commercially or professionally.2.Immediately after delivery, the purchaser is required to examine the goods for defects, their inherent nature and assured characteristics. Obvious defects are to be notified to the vendor in writing within 14 calendar days, otherwise the goods will be deemed to have been accepted unless we or our agents are guilty of malice. The deadline begins on arrival of the goods at the purchaser’s premises.

I. GeneralThe following conditions apply to all agreements and deliveries unless amended with the express permission of the vendor. Deviating general conditions of the purchaser apply only if we expressly agree to them.

II. Offers and Scope of Delivery1.Offers by the vendor are subject to change. The documents relating to the of-fer, such as illustrations, drawings, information on weights and measures, are approximate only unless expressly referred to as binding. If the vendor supplies the purchaser with illustrations or technical documentation on the goods to be delivered, these will remain the property of the vendor.2.The order signed by the purchaser is a binding offer. The sales contract will be concluded when the vendor confirms acceptance of the order describing the goods in more detail within two weeks or has delivered the item purchased. However, the vendor is obliged to inform the customer of any refusal to accept the order immediately after clarifying availability.3.Assurance of characteristics, ancillary arrangements and alterations should be confirmed in writing by the vendor. 4.We reserve the right to alter construction and shape of the item supplied provid-ed it is not materially altered, the intended use is not restricted and the altera-tions are reasonable for the purchaser.5.If, through no fault of its own, the vendor becomes aware of facts after the agreement has been concluded that cause it to have reasonable doubts about the purchaser’s creditworthiness, the vendor will be entitled to demand appro-priate security. If the purchaser fails to provide such security within a reasonable period, the vendor will be entitled to cancel the agreement.

III. Prices, Payment Conditions1.Invoices are due for payment immediately and without deduction.2.Payment by bill is only permitted by special arrangement. Bills and cheques will only be accepted as payment, not instead of payment. In the case of a cheque or bill protest, the vendor may demand payment in cash against immediate return of the cheque or the bill of exchange.3.If in the case of agreements with an agreed delivery period of more than four months material cost-increases relating to the item purchased have occurred which, in the view of the vendor, make the relationship between the goods and their cost appear inappropriate, the vendor will be entitled to request renewed negotiations on the purchase price.4.In transactions with merchants, net prices (ex works) are to be assumed plus the applicable value added tax. Measurements and dimensions at the loading point will be binding for calculating the price.5.Unless otherwise agreed, prices exclude packaging, freight or transport insur-ance.6.If the purchaser falls into arrears of payment, the vendor is entitled to charge interest on arrears of 8% over the base rate plus any other damages for arrears unless the vendor can prove a greater burden of a higher interest rate or the vendor can prove a lower interest burden. Interest is payable immediately.7.The purchaser may only offset accounts if its counter-claims have been estab-lished in law, are undisputed or have been acknowledged by the vendor. It is also entitled exercise its right of retention if its counter-claim is based on the same contractual relationship.

General Terms and Conditions of Sale, Delivery and Payment.


Terms & conditions

General Terms and Conditions of Sale, Delivery and Payment.

3.In the case of reciprocal transactions between merchants, Sections 377 and 378 of the German Commercial Code remain unaffected.4.If the purchaser finds defects in the goods, it may not gain control of them, i.e., they may not be divided, resold or reprocessed until the parties agree on how the claim is to be handled or until proceedings to preserve the evidence have been carried out by an expert appointed by the Trades Chamber or the Chamber of Industry and Commerce at the headquarters of the vendor.5.Transport damage is to be notified to the vendor immediately. The purchaser is required to take care of the necessary formalities with the carrier. If there are any breakages, waste etc. to an extent usual in the trade, these may not be objected to.6.Where objections are justified, the vendor may, at its option, repair defective goods or supply replacements. Several attempts at repair are permitted.7.If repairs are carried out, the vendor is obliged to bear all repair costs, in particu-lar costs of transport, infrastructure, labour and materials provided these do not increase due to the item purchased having been taken to another place than the place of fulfilment. 8.If the vendor lets a reasonable deadline expire without repairing the defect or supplying replacement goods, if it is unable to carry out repairs or supply replace-ment goods, if repairs fail or if repair or replacement is declined by the purchaser, the purchaser will only be entitled to cancel the agreement or demand a price-re-duction to the exclusion of all other rights provided it is not an end-customer.9.The guarantee does not extend to damage caused as a result of normal use, de-fective installation or construction work, defective commissioning (unless we are obliged to carry this out), defective or neglectful treatment or maintenance, im-proper treatment, failure to observe installation or operation instructions or the relevant standards. In particular, the warranty does not extend to parts subject to wear and tear. Parts subject to wear and tear are all revolving parts, driving parts and tools. The warranty claims will also expire when repair work is performed by the customer or a third party without our permission.10.If the purchaser gives us no opportunity or no appropriate period to see the de-fect for ourselves or, where appropriate, to carry out the necessary supplementa-ry performance (repair or replacement), all damage claims will expire.11.Further claims, in particular due to the absence of assured characteristics or due to damage that did not occur to the item delivered itself, will, if legally permissi-ble, not be accepted.

VI. Limitation of Liability1.The seller shall be liable for damage caused by wilful action, gross negligence and breach of material obligations of the contract, and in case of absence of warranted properties. Any further claims not expressly conceded in these con-ditions shall be excluded, but in any case limited to such damage foreseeable at the time of signing the contract and to the value of the delivered goods. We shall not be liable for any expenses incurred in connection with subsequent per-formance, unless they are appropriate in the individual case with respect to the purchase value of the goods, however, provided that they do not exceed 150% of the goods value. Any further expenses, for instance, in connection with the installation and de- installation of defective goods, shall be borne by us only to the extent specified in these provisions.

2.If the vendor’s liability is excluded or limited, this will also apply to the personal liability for its salaried employees, waged employees, legal representatives and agents. In cases of gross negligence by simple agents, the vendor will be liable for the repair of typical, foreseeable damage.3.This does not affect the statutory requirements of the onus of proof.4.The provision does not apply to claims arising from the German Product Liability Act or to cases of incapability of impossibility.

VII. Retention of Title1.The vendor retains ownership to the item sold until all payments arising from the sales agreement have been received.2.If the reserved goods are processed by the purchaser to form a new, movable item, they will be processed for the vendor without the vendor incurring any obligations; the new item will become the property of the vendor. When being processed with goods not belonging to the vendor, the vendor will acquire joint ownership of the new item to the value of the reserved goods in relation to the other goods at the time of processing. If reserved goods are combined, mixed or blended with the goods belonging to the vendor pursuant to Sections 947 & 948 of the German Civil Code, the purchaser will become joint owner as provided by law. If the purchaser acquires joint ownership through combination, mixing or blending, it immediately transfers joint ownership to the vendor to the value of the reserved goods in relation to the other goods at the time of combination, mixing or blending. In these cases the purchaser is required to store, free of charge, the goods deemed to be reserved goods as defined by the aforemen-tioned provision and which belong to, or which are the joint property of the vendor.3.If reserved goods are sold alone or together with goods not belonging to the vendor, the purchaser immediately assigns to the vendor the claim arising from the resale to the value of the reserved goods with all ancillary rights and in order of priority from the other goods; the vendor accepts the assignment. The value of the reserved goods is the amount of the vendor’s invoice plus a 10% security surcharge; however, this will not included if this conflicts with the rights of third parties. If the reserved goods are resold but remain the joint property of the vendor, the assignment of the claim extends to the amount equal to the vendor’s share of joint ownership.4.The purchaser is obliged to treat the goods purchased with care as long while they have not become the purchaser’s property. In particular, the purchaser is obliged to sufficiently insure the goods against damage by fire, water and theft for replacement value at its own risk. If repair and inspection work are required, the purchaser must carry this out at its own expense and in a timely manner.5.While reserving right of cancellation, the vendor authorizes the purchaser to col-lect outstanding debts assigned to the vendor. The vendor will not make use of its own right to collect such debts as long as the purchaser fulfils its payment obligations, including to third parties. At the request of the vendor, the purchaser will be required to name the debtors of the assigned claim and to notify them of the assignment; the vendor is authorized to notify the debtors of the assignment itself. 6.The purchaser is required to inform the vendor immediately of any compulsory execution measures concerning the reserved goods or the assigned claims and


Terms & Conditions

provide the documentation required for an appeal.7.The right of resale, use or installation of the reserved goods and authority to collect the assigned claims expires on cessation of payment, application for the opening of insolvency proceedings or judicial or out-of-court settlements; in the case of a bill or cheque protest, authorization for direct debiting will also expire. This does not apply to the rights of the liquidator.8.The vendor is entitled to demand appropriate security for the due fulfilment of the purchaser’s debts. If the value of this security exceeds the claims to be se-cured by more than 20%, the vendor will, at its option, be entitled re-assign or release the goods.

VIII. Cancellation of the Agreement and Return of the Goods1.If the customer fails to accept the goods without justification or if we take back the goods at the customer’s request or if, in exercising our rights of retention of title, we will, at our, option, be entitled to demand a lump-sum payment of 20% of the original price owed under the agreement or to apply it to a credit note instead of making a formal claim adjustment. The customer remains entitled to prove that no damage was caused or was only caused at a considerably lesser extent.

IX. Data Protection1.The purchaser is hereby informed that the vendor will process the personal data obtained in the course of the business relationship according to the provisions of the German Data Protection Act.

X. Legal Venue/Place of Fulfilment1.Unless otherwise stated in the purchase agreement and/or the order confirma-tion, the vendor’s registered offices are the place of fulfilment.2.If the purchaser is a merchant, a legal entity in German public law or a spe-cial fund in German public law, the legal venue for all legal disputes, including summary bill or cheque enforcement proceedings, the are vendor’s registered offices. The vendor is also entitled to institute legal action where the customer’s registered offices are located.3.This contractual relationship is subject solely to the laws of the Federal Republic of Germany.

XI. Legal Validity1.Should individual provisions be or become legally invalid or should an omission occur in the agreement, the legal validity of the remainder of the agreement will not be affected.


Notes

01 |

2015

. It

em n

umbe

r 90

01.0

000

gbm solutions blaugelb collection

Documents

blaugelb products

brass products

range of products

new products

broad spectrum of products

blaugelb brand

polished brass

door levers