2

IMPORTANT SAFETY AND INSTALLATION INSTRUCTIONS

INFORMATION RELATING TO POSSIBLE PERSONAL INJURY, ELECTRIC SHOCKAND FIRE HAZARD HAS BEEN INCLUDED IN THIS LIST.

WARNING - When using electrical products, basic precautions should always be followed,including the following:

1. Read all instructions before using the product.

2. The product should be connected to a power supply only of the type described in the

operating instructions or as marked on the product.

3. Do not open the cover under any circumstances.

4. Power is supplied through a polarised line plug (one wide blade). Connect only to an

outlet designed for a polarised plug.

5. Keep the power cord away from other objects. Make sure that the cord is not twisted,

placed in any lane of traffic, or a trapped under the piano.

6. Place your Genio PRO S away from direct sunlight, water or moisture, or hot or cold

air currents.

7. The power-supply cord of the product should be unplugged from the outlet when left

unused for a long period of time.

8. If repair service is necessary, refer only to authorised service personnel.

9. This product, either alone or in combination with an amplifier and headphones or

speakers, may be capable of producing sound levels that could cause permanent

hearing loss. Do not operate for a long period of time at a high volume level or at a

level that is uncomfortable. If you experience any hearing loss or ringing in the ears,

you should consult an audiologist.

The product should be placed at a location or position that does not interfere with its

proper ventilation.

Care should be taken so that objects do not fall and liquids are not spilled into the

enclosure through openings.

The product should be serviced by qualified service personnel when:

a) The power supply cord or the plug has been damaged; or

b) Object has fallen, or liquid has been spilled onto the product; or

c) The product has been exposed to rain; or

d) The product does not appear to operate normally or exhibits a marked change in

performance; or

e) The product has been dropped, or the enclosure damaged.

10.

11.

12.

3

We greatly appreciate your purchase of the Genio PRO S. The Genio PRO S allows youto enjoy your new piano any time you want without disturbing others. With the mute leverin the release position, your Genio PRO S functions as a quality upright acoustic pianowith the added benefit of audio and MIDI output signals.

With the mute lever in the Mute position, the piano’s acoustic sound is silenced andheadphones can be used to hear the audio signal privately.

Before playing your new Genio PRO S, we suggest reading this user’s guide thoroughlyto become acquainted with its capabilities and functions.

Connection Diagram of the Genio PRO S

A. Mute Mechanism

B. Sound Generation

Main Unit

A. Front Panel

B. Rear Panel

Operations

A. How to play your Genio PRO S in Silent

B. How to play the piano with acoustic sounds.

C. How to play the acoustic piano with the Genio PRO S

How to try out various contained sounds on the panel

A. Sound Select

B. Howe to edit User-Set

C. How to change the name of User-Set

D. Description of the parameter of the User s Edit mode

How to select one of the 128GM Sounds

A. How to change the touch response of the keyboard

B. Transpose

C. How to change the effects

Table of contents

5

6-7

8-9

10-15

16-17

4

Metronome

How to play along with Metronome operation

Pitch

How to set the Pitch

Effect

How to set the reverb effect on the front panel

Record and Play

A. Record

B. Play

Demo and Educational accompaniment song

A. Demo 1

B. Demo 2 (Educational Mode)

Initializing of the Genio PRO S

How to adjust the sensitivity of the Genio PRO S

Application

A. Connecting your Genio PRO S to external Audio Equipment

B. Connecting your Genio PRO S to external MIDI Equipment

Troubling shooting

GM Program Chart

Drum Chart

MIDI Implementation Chart

Chart for User-Set Editing

Specification

18-19

20

20

21-22

23-25

26

27

28-29

30

31

32

33

34

35

5

Connection Diagram of the Genio PRO S

Connection Diagram

A. Mute MechanismHammer Shank Stop Rail (Mute Rail)

In the mute position, Mute Rail protects the hammer shank just before hitting the string.Mute rail is fixed to the action of the piano instead of damper stop rail.

Mute LeverBy simple operation of mute lever, user can change the piano mode between traditionalacoustic piano and Genio PRO S in silent.

B. Generation MIDI Signal and SoundsMain Control Unit

All the electronic device hooking up with this main control unit and controls sound generationand multi function of the system.

Key Sensor railKey Sensor rail is placed beneath of the keyboard and detects the key moving data to generateMIDI signal by scanning program of the main control unit.

Pedal sensorPedal sensor detects the pedal moving data to simulate sound effect of the real pedal working.

AC Adaptor (Power supply)AC adaptor supplies required power to the Genio PRO S system.

HeadphonesHeadphones provide private sound when your performance in silent.

Main Control Unit

6

A. Front Panel

1. Power

2. LED indicator

3. LCD display

4. TempoMetronome

5. MeasurePitch

6. SongEffect

7. TrackSound

8. 2. Left-Track-1. Right▼ Value ▲

9. Next/Cancel Start/StopRecord Play

10. Volume

11. Headphone Jacks

Press to turn the Genio PRO S on press again to turn it off

Flashes according to the metronome beat with read when down beat, green when up beat.

Shows the currently selected parameter with its dynamic or value.Shows the currently selected song and measure when education mode.

Play mode : Press to turn the metronome on;press again to turn it offDemo mode : Press to set the tempo value of the selected demo song.

Play mode : Press to set the reference pitchDemo mode : Press to set start and end measure of the selected song to play

Play mode : Press to set the reverb effect by using Demo mode :Press to setthe song

Play mode : To select one of 16 pre-set and 16 user-set sounds, press either[▼] Value or [▲] button

Demo mode : To turn the Track 1(Right hand) and Track 2(Left hand) andtrack for accompaniment ON and OFF by pressing either [▼]Value or [▲] button

Play mode : Press either [▼] Value or [▲] button to set the value to theselected parameter.

Demo mode : To turn the Track 1(Right hand) and Track 2 (Left hand) andtrack for accompaniment ON and OFF by pressing either [▼]Value or [▲] button

Play mode : Control record and play function of the recorderDemo mode : To change the function or mode, press either [▼] Value or [▲]

button

Volume control Knob

Connect the Stereo Headphones through those jacks

7

B. Rear Panel

1. Audio INPUT/OUTPUT: Stereo audio connections to external audio equipment.

2. MIDI INPUT/OUTPUT: MIDI connections to external MIDI equipment or computer.

3. KEYBOARD: Detected key moving data connects to the main control unit by using signal cable

through this jack.

4. AC power adaptor (power supply) plugs in here.

Operations

8

Sophisticated technology in your Genio PRO S allows you to play it like an acoustic

piano or, when desired silently. When Genio PRO S is playing, only you can hear your

performance through headphones.

A. How to play the Genio PRO S in Silent

A. Make sure that the AC power adaptor is connected to the Genio PRO S and plugged

into an outlet.

B. Pull the mute lever which is in located under the right side of the keyboard to play

the piano in silent.

1) Press the [Power] button to turn the Genio PRO S on

2) Put the headphones on and plug into either headphone jack on the right side.

Indicator may change the color from green to red when plugs the Headphones into the Jack.

3) Adjust the volume as desired.

4) Piano 1 is default sound. If desired, select another sound instead by pressing either [▼] Value

or [▲] button

5) Enjoy your performance without disturbing other people.

Indicator may change the color from green to red when plugs the headphones into the jack

Note: After turning on the Genio PRO S, a few seconds of operation are required before the unit is

ready to play.

Mute

Release

Mute Lever

9

B. How to play the piano with acoustic sounds

1) Release mute lever

2) Play the Piano

C. How to play the acoustic piano with the Genio PRO S

In order to play the acoustic piano with the Genio PRO S together, the Genio PRO S

should be connected to the amplifier system to amplify the sound of the Genio PRO S.

1) Release the muter lever

2) Press the [Power] button to turn the Genio PRO S on.

3) Adjust the Genio PRO S and amplifier sound volume to blend the sound properly.

4) Enjoy your performance by choosing desired sounds.

Mute

Release(Acoustic)

Mute Lever

Mute

Release(Acoustic)

Mute Lever

+

10

The Genio PRO S contains 16 pre-set and 16 user-set program that can be selected by

pressing either [▼] Value or [▲] button on the panel. And by using the [Sound]button+

pressing the keys, you may select one of 128 sounds contained.

A. Sound selectWhen the Genio PRO S on and press the [Sound] button then the Genio PRO S would be sound

mode. In this mode, user can change and choose one of the contained 32sounds the sounds by

pressing either [▼] Value or [▲ ] button

1) Pressing the Value[▲] button, then pre-set number increase and moves from the end of pre-set to

the first of the user-set

2) Pressing the Value [▼]button, then user-set number decrease and moves from first of the user-set

to the end of the pre-set.

P2 Piano 2

How to try out various contained sounds on the panel

11

3) While keep pressing either [▼] Value or [▲] button, then Value increase or decrease fast.

4) Press both [▼] Value or [▲ ] buttons together, then pre-set is set to the P1 : Piano 1 from any

sounds.

P2 Piano 2

P1 Piano 1

No Pre-Set

P1 Piano 1

P2 Piano 2

P3 E.Piano 1

P4 E.Piano 2

P5 E.Piano 3

P6 Vibraphone

P7 Celesta

P8 Tinkle Bel

No Pre-Set

P9 Harpsichord

P10 Sound Track

P11 Strings

P12 Pan Flute

P13 Pipe Organ

P14 Church Organ

P15 Organ 3

P16 Tubular Bell

No Title

U1 Accordion

U2 Nylon Guitar

U3 Jazz Guitar

U4 Steel Guitar

U5 Strings

U6 Brass 1

U7 Brass 2

U8 Saxophone

No Title

U9 Clarinet

U10 Marimba

U11 Xylophone

U12 Reed Organ

U13 Piano+Trpt

U14 Piano+Flute

U15 Adventure

U16 Piano+Vibra

Pre-Set

User-Set

12

B. How to edit User-Set1) Press either [▼] Value or [▲] button to select User-Set that will be modified parameter among

16programs.

2) Press both [Record] + [Sound] buttons together to get into edit mode.

Ch1 : Current selected channel is activated for test.

Brief function of each key in edit mode

3) Press either [Metronome] or [Pitch] button to select the channel to be modified.

4) Press either [Effect] or [Sound] button to select the parameter to be modified the value.

5) Press either [▼] Value or [▲] button to set new value to the parameter selected.

6) Do the same procedure one by one after modification of one of among parameters.

7) Press both [▼] Value or [▲] buttons together, the value will be off from selected parameter.

8) Ch10 is only designated for drum set.

Global parameter

Global parameter is effective to all channel as under listed parameter.

Global parameterVelocity Curve / Pitch/Reverb Type / Chorus Type / Cutoff Frequency / Resonance / Title

+

Button Function

Metronome Channel Down

Pitch Channel Up

Effect Parameter Reverse Direction

Sound Parameter Forward Direction

[▼] Value Value Down

Value [▲] Value Up

13

You can change the title of the User-set after modification as under instructions.

C. How to change the name of User-set

1) Press either [Effect] or [Sound] button to find title parameter

2) Character with cursor can be changed by pressing either [▼] Value or [▲] button to set new letter.

3) Press either [Metronome] or [Pitch] button to move next letter to modify.

4) Press either [▼] Value or [▲] button to put new letter to current letter.

5) Press either [Effect] or [Sound] button to move another parameter after finishing title modification.

Return to play mode with memorizing modified parameter

Press both [Record]+[Sound] buttons together, then modified parameter will be memorized to the

built-in memory and return to play mode.

Return to play mode without memorizing modified data

Press both [Play]+[Sound] buttons together, then return to play mode without memorizing any data.

Piano 1Title Char.:P

001

14

D. Description of the Parameter of the User s Edit mode

Parameter Range Description of the parameter

Program Patch 000-127 The Genio PRO S contains 128GM compatible sounds

which can be selected for each channel.

Press either [▼] Value or [▲] button to select the

sounds required to the channel.

To off the channel, press [▼] Value + [▲] buttons

together.

Volume 000-127 Volume adjusts the loudness of the sounds of each

channel

Reverb 000-127 Reverb sets the amount of the reverberant sound of

each channel, as you would hear space effect.

Chorus 000-127 Chorus effects broadens the spatial image of the sound

like performing with another player

Transpose +24semitone Transpose sets the pitch of the program of the each

channel

Key Low A0~C8 Low key sets the lowest key of the effective key range

of each channel.

Key High A0~C8 High key sets the highest key of the effective key range

of each channel.

PAN L63~R63 PAN sets stereo simulation of the sound source

Velocity Low 000~127 Low velocity sets the lowest velocity of the range you

want to set.

Lower key than the lowest key does not work for sound.

Velocity High 000~127 High velocity sets the highest velocity of the range you

want to set.

Higher key than the highest key does not work for sound.

Velocity Shift 000~127 Velocity shift sets the shift range of the velocity

Velocity Enable, Velocity sets the activate of the velocity of each channel

Disable

15

Parameter Range Description of the parameter

Left Pedal Soft, Sostenuto Left pedal parameter sets the function of the left

pedal to be Soft like an acoustic piano, Sostenuto or

disable.

Smart Pedal On/Off Smart Pedal is an unique function that is invented by

ourselves when user plays Genio PRO S set with

organ sound. If user sets the smart pedal function to

be a organ, then even such kind poor pedaling,

organ sound will not be mixed up with former played

chord.

Poly Mode Poly, Mono Every notes that were pressed by keyboard will

activate the sound.

Reverb Type 1-8 Genio PRO S has 8 types of Reverb that can be

selected to each channel.

Chorus Type 1-8 Genio PRO S has 8 types of Chorus effect that can

be selected to each channel.

Velocity Curve 1-5 Touch response of the key can be selected among

5curves

Pitch 438-445Hz Pitch can be set by the 1Hz.

CutOff Frequency 000 127 Kind of electric filter to set the nuance of the tone.

Resonance 000 127 Using this filter user can control emphasized sound

around Cutoff Frequency

Title Char. Title of User-set can be modified in this field.

16

The Genio PRO S internally contains 128GM sounds more besides pre-set and user-set.

They all can be selected by using piano keys like the numeric keypad from 0 to 9 with the

[Sound] button pressing.

1) Press and hold the [Sound] button on the front panel.

2) Strike one, two or three black keys to select the desired number of sound.

3) Release the [Sound] button.

A. How to change the touch response of the keyboardThe touch of your Genio PRO S can be changed to accommodate players with a lighter

or heavier than average touch.

To change form the default Medium setting, do these;

1) Press and hold the [Sound] button on the front panel.

2) Press one of the 5 black keys just below the middle C to select the new touch.

Key Velocity curve

C#3(29) Velocity 1 Heavy

D#3(31) Velocity 2 Medium Heavy

F#3(34) Velocity 3 Medium

G#3(36) Velocity 4 Medium Light

A#3(38) Velocity 5 Light

How to select one of the 128GM sounds

①② ③

17

B. TransposeTranspose by the Semitone1) Press and hold the [Sound] button

2) Strike the D#4(43) black key to transpose up as desired or

C#4(41) black key to transpose down by the semitone.

3) Control range of the transpose is 24 Semitone by the semitone.

Transpose by the Octave1) Press and hold the [Sound] button

2) Strike the G#4(48) black key to transpose up by the octave or

Strike the F#4(46) black key to transpose up by the octave or;

3) Strike the A#4(50) black key to reset the transpose quickly.

4) Control range of the transpose is 2 octaves by the octave.

C. How to change the effectsTo simulate the space sound effects to the current selected sound, a player can selectthe desired chorus and reverb type and adjust the depth of each type.

Reverb Amount (Depth)1) Press and hold the [Sound] button

2) Strike the D#5(55) black key to increase reverb amount or

Strike the C#5(53) black key to decrease reverb amount by 10.

Chorus Amount (Depth)1) Press and hold the [Sound] button

2) Strike the G#5(60) black key to increase the chorus amount

or Strike the F#5(58) black key to decrease the chorus amount by 10.

Reverb typeWhile pressing and holding the [Sound] button, strike the C#6(65) black key cycles among

room size, which correspond adjust the depth of each type.

Chorus typeWhile pressing and holding the [Sound] button, strike the D#6(67) black key cycles among

chorus types, which correspond adjust the depth of each type.

Key Control Range Function

41 : C#4 –24Semitone Down

43 : D#4 –24 Semitone Up

46 : F#4 –2 Octave Down

48 : G#4 –2 Octave Up

50 : A#4 0 Reset

Key Range Function

53 : C#5 000 Reverb Down

55 : D#5 127 Reverb Up

58 : F#5 000 Chorus Down

60 : G#5 127 Chorus Up

65 : A#5 8 Reverb Type

67 : D#6 8 Chorus Type

Metronome

18

The built-in metronome has adjustable parameter for Tempo, Beat, Rhythm, and Volume.

Here is how to adjust each of these.

How to play along with Metronome operationIn play mode, press the [Metronome] button, then display will change as show below

Note:

1) Indicates the operating status of metronome

Sound : Tick and Tack sound according to down or up beat.

Visual operates : LED indicator

2) Metr. X means Off ; Metr. O means On

3)There are three parameters of Tempo, Beat and Volume, and can be adjusted the value during

operating the metronome.

Beginning the metronome mode cursor indicates the Tempo parameter.

Metr. x 5 4/4 Title Char.:P

120

Metronome On/Off

LED Indicator Volume TempoBeat

19

Tempo1) Press either [▼] Value or [▲] button to set as desired Tempo value

2) Control range of the Tempo value is from 25 to 250 by the one

3) Pressing both [▼] Value and[▲] buttons together, then tempo will set to default value 120.

Beat1) Press the [Pitch] button to change from the Tempo to Beat parameter.

2) Press either [▼] Value or [▲] button to set as desired Beat value

3) Control range of the Beat value is 21tyes from 1/2 to 9/8.

Type of the Beat

Volume1) Press the [Pitch] button to change from the Beat to Volume parameter.

2) Press either [▼] Value or [▲] button to set as desired Volume.

3) Control range of the Volume is from 0~9 and default value is 5.

Note : Whenever press the [Pitch] button in metronome mode, parameter cycles among three,

which correspond with programmed value as described.

2 Beat 1/2 2/2 3/2 4/2

4 Beat 1/4 2/4 3/4 4/4 5/4 6/4 7/4 8/4

8 Beat 1/8 2/8 3/8 4/8 5/8 6/8 7/8 8/8 9/8

20

Pitch

When you play the Genio PRO S along with another musical instrument, you may need

to change the pitch. You can easily change the pitch as instructed bellows.

How to set the pitch1) Press the [Pitch] button to get into pitch mode

2) Press either [▼] Value or [▲] button to choose as desired pitch

3) Press the [Sound] button to return to the play mode

4) Control range of the Pitch is from 438~445Hz

5) Press both [▼] Value and[▲] buttons together, the pitch value will set to default value 440Hz

EffectWhen you play the Genio PRO S, you may want more fluent space effect like a concert

hall, then you can easily change the reverb effect depth as instructed bellows.

How to set the reverb effect on the front panel1) Press the [Effect] button to get into effect mode

2) Press either [▼] Value or [▲] button to choose as desired effect

3) Press the[Sound]button to return to the play mode

4) Control range of the Effect is from 000~127

Note : Hall 1 is the default type that effects with selected reverb depth

P1: Piano1A49=440Hz

120

P1: Piano1Reverb:000

120

21

Record and Play

Your Genio PRO S has a built-in two track recorder.

With it you can record your performance then later play back through the audio and MIDI output.

A. RecordIn case, you want to record Track 1

1) Press the [Record] button to get into the record mode 1

2) In order to record Track 1, press the [Play] button to start recording.

Note : Before starting recording, beat with settled tempo in advance for one or two measure for

accurate synchronizing play and reference tempo.

3) During recording, part of display shows the current measure for the reference.

4) Press the [Play] button again to stop recording.

Note : If required to change the reference tempo, press the [Metronome] button to get into the

metronome mode. Then set the required tempo and beat. To return recording mode, press

[Record] button again.

In case, you want to record another song to Track 2 separately from Track 1

1) Press either [▼] Value or [▲] button, display to be R X.

2) Press the [Play] button to start recording to Track 2.

3) Press the [Play] button again to stop recording.

In case, you want to record Track 2 with an assemble of pre-recorded Track 1 sound

1) Press either [▲] Value or [▼] button, display to be R P.

2) Press the [Play] button to start recording to Track 2.

3) Press the [Play] button again to stop recording.

Note : Whenever you press the [Play] button to end recording, in the same time stop recording, modewill return to play mode automatically.

Metr. X 5 4/4 001 X R

120

Metronome On/Off

Current MeasureR:RecordP:Track PlayX:Track On/Off

Left Right Track 2 (Left / Bass) Track 1 (Right / Melody)

X R Disable Enable

R X Enable Disable

R P Enable Play

22

B. Play1) Press the [Play] button to get into the play mode.

2) Press either [▼] Value or [▲] button to be required play mode as shown below chart

3) Press the [Play] button to start playing your last recorded performance.

Display shows the status of current measure play back.

4) Press the [Play] button again to stop playing.

Note : Whenever you press the [Play] button during play back, mode will be returned automatically

to play mode.

Play 4/4 000 X P

120

Current MeasureP:Track PlayX:Track Off

Left Right Track 2 (Left / Bass) Track 1 (Right / Melody)

X P Disable Enable

P X Enable Disable

P P Enable Enable

Demo and Educational accompaniment song

23

A. Demo 1Your Genio PRO S has built-in 20Piano Sonatine demonstration songs in demo 1.

Please refer to chart

1) Press both [Record] + [Play] buttons together to get into demo mode.

Display will show as below

2) If you want to hear from very first song, press [Play] button.

Then demo will start play continuously after finishing current song to next song till pressing the

[Play] button again.

3) Press the [Effect] button, then cursor will move to Demo. 01←, either [▼] Value or [▲] button to

set required song to be started.

4) Press the [Metronome] button, then cursor will move → 082, either [▼] Value or [▲] button to set

required tempo to be played song.

Note : You can play along with demo song and can change the tempo while demo song is playing.

5) Press the [Record] button to be back to play mode.

Demo. 01 4/4 001 079 000

130

CurrentStart

No. of Song / Beat / Temp

Stop

24

Your Genio PRO S piano has built-in 502 songs (Piano Sonatine:81 songs, Piano Adventure:

401songs) can be played to help Fun & Easy Lesson along with Piano Adventure.

B. Demo 2 (Educational Mode)

Left, Right hand or Accompaniment can be On/Off individually.

1) Press the [Sound] button to set the track of Left, Right hand or Accompaniment, then cursor will

move to track mode.

2) Press either [▼] Value or [▲]button to set On/Off of the Left and Right hand as required.

3) Press both [▼] Value or [▲]buttons together to set accompaniment On and Off as required.

Note : Instead of off track, you can play it on the keyboard for practicing.

Playing the song that you selected will be repeated till you press the [Play] button to stop.

Play along with setting the book and page

1) Press the [Effect] button to select the book you want to play.

2) Press either [▼] Value or [▲]button to select page of the selected book.

3) Press the [Play] button to play it.

1L - P15001 009 000 P+P

1024/4

CurrentStart1L - P15 P + P

Beat Tempo

Stop

No. of Page of the BookL:Lesson, P:Performance, T:TechnicLevel (1~8)

Right HandAccompanimentLeft Hand

(P:On, X:Off)(+:On, --:Off)(P:On, X:Off)

Play along with setting the tempo

1) Press the [Metronome] button after setting book and page you want to play, to set new tempo

if required.

2) Press either [▼] Value or [▲] button to change tempo as required.

3) Press the [Play] button to start playing of the set song.

Play along with set the start and stop measure

Your Genio PRO S has built—in special function to play with setting start and stop measure for

practice repeatedly for some phrase.

1) Press the [Pitch] button to move the cursor to start or stop measure.

2) Press either [▼] Value or [▲]button to set the start and stop button.

3) Press the [Play] button to start playing of the set measure phrase.

4) Press the [Play] button to stop playing.

25

Initializing of the Genio PRO S

26

Occasionally you may want to initialize the key sensor in you Genio PRO S for accurate

response when in silent mode. A good time to do this when it is new and after the acoustic

parts(hammers and strings) have been tuned. Use the following procedure to initialize the

sensors.

Before getting start1) The keyboard cable and AC power adaptor should be plugged into the Genio PRO S control unit

and the power should be OFF.

2) The mute lever should be in the Mute position.

3) Make sure that noting is sitting on the keyboard that might press a key down.

How to initialize the Genio PRO S

1) While holding the [Metronome] button down, turn the Genio PRO S on.

After 3 seconds, release the [Metronome] button.

In few seconds, the display should be as below.

2) Press each of the 88keys, one at a time, all the way down with medium force and speed(not too fast).

After you have finished pressing all of the keys, press the [Metronome] button again to finish the

initialization.

3) It will take a few seconds for the data to be stored in permanent memory.

When the data is successfully stored, the display will change as shown and the piano is ready to

play again.

Key SetupBt. Off Please

Key SetupMemorizing...

27

How to adjust the sensitivity of the Genio PRO S

The initialization procedure on the previous page should make all of the keys equally

sensitive. If you find that some keys still play too loudly or softly, use the following procedure

to adjust the sensitivity of individual key.

1) Make sure that the Genio PRO S is off.

While holding the [Record] button down, turn the Genio PRO S on.

After 3 seconds, release the [Record] button.

The display should be as below.

2) While wearing headphones to monitor the sound, play each key and listen to the volume of the

sound. If the sensitivity needs to be adjusted, use either [▼] Value or [▲]button to adjust the sound

volume for the key last played down or up so that it matches the other keys.

3) The display shows the current key s sensitivity value from 000 to 255.

When moving to a different key, the last displayed value for the previous key is remembered.

Key Sense Adj.No.- S.-

No. of Keyboard Sensitivity

Key Sense Adj.No.79 S.093

Key Sense Adj.Memorizing...

Application

28

A. Connecting your Genio PRO S to external Audio Equipment1) Use two audio cables to connect the Left and Right Audio outputs of the Genio PRO S to inputs of

your audio system. The signal is Unbalanced, line level . See the diagram below which is

representative of a club or performance hall audio system.

2) You may also connect an external audio source, such as CD player, to the audio inputs of the Genio

PRO S. Using two audio cables, connect the Aux or Line output of your source to the Left and Right

Audio inputs of the Genio PRO S. The sound in the Genio PRO S headphones will not be a mixture

of the piano sound and the external source sound. Use the volume control on the external source to

adjust the external sound volume.

Power Amp

Mixer

Speaker System

Control Unit

Line Out L, R

Line In 3, 4

Ch1, 2 Input Ch1, 2 Output

Input

Input

Audio Out

Amplifier Control Unit CD Player etc.

Line Out

Audio In

AUX In

29

B. Connecting your Genio PRO S to external MIDI Equipment1) In order to send MIDI data to a General MIDI synthesizer or computer, connect a MIDI cable

between the MIDI Out port of the Genio PRO S and the MIDI In port of your synthesizer or

computer. See the diagram below.

2) In order to receive MIDI data from a General MIDI keyboard, synthesizer or computer, connect a

MIDI cable between the MIDI Out port of the external device and MIDI In port of the Genio PRO S.

See the diagram below.

Note : 1. Most computer do not have a MIDI interface built-in. You may need to add a MIDI interface

to your computer before you can connect it to your Genio PRO S.

2. You can connect MIDI In and Out cables at the same time. If connecting to a computer, be

sure to turn Patch through off in your software to avoid double notes

Control Unit

Computer

MIDI Output

Control Unit

MIDI Output

Keyboard/Sound Moduler

MIDI In

MIDI In

Computer

Control Unit

MIDI Output

MIDI Output

MIDI In

Keyboard/Sound Moduler

Trouble shooting

30

Phenomenon

No Power

No Sound

Some key does not work

Some key is louder or

softer than other key.

Headphones

Possible cause and Trouble shooting

Check if AC plug is connected to the outlet.

Check if DC plug is connected well to the DC Jack of the Rear

Panel of the main control unit.

Check if you are using the another power supply that is out of

spec of the Genio PRO S.

Check if headphones are connected correctly.

Check if volume is lower position.

Check if bar graph is moving when you strike the keys.

- If bar graph is not moving correctly then check the cable

between main control unit and key sensor rail.

- If cale is all right, then please do the initializing procedure.

Please do the initializing procedure as instructed on User s

Guide (P26)

Please do the sensitivity of Genio PRO S even you did

initializing procedure as instructed on User s Guide (P27)

Check the headphones if there is particle inside of the ear-pad.

31

GM Program chart

Drum chart

32

33

MIDI Implementation Chart

Function Transmitted Received Remark

MIDI Channels 1~16 1~16

Mode X 3

Note Number 21~108 0~127

Velocity

Note On 9n,V=127 9n,V=127

Note Off 9n,V=0 8n,V=0~127

Key Aftertouch X X

Channel Aftertouch X O

Pitch Bend X O ±2 Octave Pitch Bend Sensitivity recognized

Control Change

0,32 X O Bank Select

1 X O Modulation

6,38 X O Data Entry

7 X O Main Volume

10 X O Pan

11 X O Expression

64 O O Damper Pedal

67 O O Soft Pedal

91 X O Reverb Depth

93 X O Chorus Depth

98 X O NRPN LSB

99 X O NRPN MSB

100 X O RPN LSB

101 X O RPN MSB

120 X O All Sound Off

121 X O Reset All Controllers

123 X O All Note Off

Programme Change X O (1~127)

Note:

1. Default Pitch Bend = 1 Semitone

2. Mode 1: OMNI On, Poly

3. Mode 2: OMNI Off, Poly

Ch

art

for

Use

r-S

et E

dit

ing

34

35

Specifications

Item

Model

Mute Mechanism

Sensing Method

Sensor

Velocity Level

Touch Response

Key sensitivity

Pedal sensor

Sound

Polyphony

Effects

Transpose

Pitch

Metronome

Demo songs

Record/Play

Display

Headphone Jack

Audio

MIDI

Power Supply

Dimension

Educational Mode

Remark

Specification

Genio PRO S

Universal Mute Rail with Lever

Continuous position reflector type

photo interpreter

127Level

5Types

Individual adjustable

Damper and Soft

16Pre-set + 16 User-set(128GM), Sound Memory : 384Mbit

128

Reverb Type 8

Reverb Depth 000~127

Chorus Type 8

Chorus Depth 000~127

–24Semitone(2Octave)

Default 440Hz

Variable 438~445Hz(1Hz)

Tempo 25~250

Beat 21Types

Volume 0~9

502songs (Piano sonatine : 81, Piano adventure : 421)

1Song(2tracks)

2x16 LCD Display

1/8 x 2 Jacks

Input/Output(Stereo)

Input/Thru/Output

Input : AC 100~240V, Output : DC 12V, 1~3A

225x36x150(WxHxD)

Start, Stop, Current measure set(Repeat)

Tempo Control

Right, Left, Accompaniment On/Off