georgian-german workshop on basic sciencecentral institute of technology - zatslide 1 tbilisi,...

Georgian-German Workshop on Basic Science Central Institute of Technology - ZAT slide 1 Tbilisi, 6th-10th August 2012 Technology for World-Class Research Jörg Wolters, Ghaleb Natour

Mitg

lied

der H

elm

holtz-G

em

ein

schaft

Dr. Helmut Soltner

Workshop EDM Searches at Storage Rings –

European Center for Theoretical Studies in Nuclear Physics and Related Areas - October 1-5 - Trento

Capabilities of Central Institute of Technology (ZAT): Examples

Workshop EDM Searches at Storage Rings Central Institute of Technology - ZAT slide 2 Trento, October 1-5 Technology for World-Class Research Jörg Wolters, Ghaleb Natour

Forschungszentrum Jülich GmbH

We work towards comprehensive solutions for the grand challenges facing society in the future in the fields of health, energy and environment, and information technology, thus laying the foundation for future key technologies.


Forschungszentrum Jülich GmbH

Facts and Figures:

about 50 institutes

total personnel: about 4,700scientists: ~1,700,

technical personnel: ~1,700

One of the institutes: ZAT = Zentralinstitut für Technologie (Central Institute of Technology) employees: 150

Facts and Figures:

about 50 institutes

total personnel: about 4,700scientists: ~1,700,

technical personnel: ~1,700

One of the institutes: ZAT = Zentralinstitut für Technologie (Central Institute of Technology) employees: 150


Central Institute of Technology - ZAT who we are – ZAT mission

ZAT is a science and technology institute, which supports the research institutes of the research center in Jülich

For the institutes and externals we design, develop and build scientific equipment and experiments not available on the market

We maintain and modify the setups, deliver technology consultancy and perform feasibility studies

We build competences in new areas und adjust permanently our capabilities to the needs of our partners


engineering und new technologies project management (15 engineers) engineering design, numerical simulations and design calculations feasibility studies & experiments, physical measurements automation and control techniques joining technologies & materials research magnetic bearing and drive systems

manufacturing technologies & assembly

welding technologies high-precision machining and assembling, machine manufacturing rapid prototyping glass, plastics and ceramics machining surface treatment techniques

inspection and approval procedures, e.g.: TÜV certification for pressure vessels certifications for welding technologies

Central Institute of Technology - ZAT who we are – ZAT competences


Hadron Physics (IKP: Institute for Nuclear Physics) Accelerator and accelerator components Detector systems for proton– and antiproton beams

Neutron Science (JCNS: Jülich Center for Neutron Science) Instruments for advanced Neutron sources Choppers for Neutron scattering (magnetic bearing) European Spallation Source ESS

Energy (Institutes for Energy and Climate Research) Instruments for Nuclear Fusion Research Projects for photovoltaics, full cells

Environment (Institutes for Energy and Climate Research) Setups for measurement of trace gases in the atmosphere

Bio-Geo Science (IBG 3: Institute for Bio- und Geo Science) Equipment for plant and soil investigations

Medicine (Institutes for Neuroscience and Medicine) Work for MRT- und PET- set ups Equipment for production of radio nuclides

Projects at Central Institute of Technology

28/09/12 Folie 7Technology for Excellent Science

High-Field Magnets for HESR at

http://www.fz-juelich.de/ikp/DE/Home/home_node.html

28/09/12 Folie 8

High-Field Magnets for HESR

Technology for Excellent Science

Circumference 575 m

28/09/12 Folie 9Technology for Excellent Science

Dipole

HESR Dipoles

Length about 4.2 mMax. flux density 1.7 T

yoke

pole

28/09/12 Folie 10


HESR Quadrupoles

1/8 model of quadrupole magnet detail

Length 0.6 mGradient 25 T/m

shim

bore

28/09/12 Folie 11


HESR Sextupoles

1/12 model of sextupole

Length 0.3 mField 45 T/m2

Workshop EDM Searches at Storage Rings,

Trento, October 1-5, 2012 Technology for World-Class Research Helmut Soltner

PAX@COSY

in collaboration with: Institut für Kernphysik (IKP)

supports for magnets

linear guided assembling system

engineering, design and manufacturingof the weak field and compensation coils

engineering, design and manufacturing of PAX target chamber

NEG-pump system with 10 NEG-pumpsand heat protection jalousie

support for target chamber, ABS (atomic beam source) and BRP (Breit-Rabi polarimeter)

design and installation of the entire heating system :

alignment of concrete elements

PAX – Polarised Antiproton Experiments

28/09/12 Folie 13


Electron cooler at COSY

Test setup at Budker Institute

28/09/12 Folie 14


Stochastic Cooling for HESR

Test cavityPick-up Tank

28/09/12 Folie 15


Kicker magnets for HESR

Kicker magnets and vacuum chamber

Pick-up Tank

28/09/12 Folie 16


ATRAP- Experiment for Trapping Antihydrogen at CERN

Blow up of components of antihydrogen trap

quadrupole

http://gabrielse.physics.harvard.edu/

28/09/12 Folie 17


Neutron focussing by cooled MgF2 lenses

cryocooler

28/09/12 Folie 18


The scientific scope of the instrument includes the determination of coherent and localized excitations in novel materials.

TOPASThermal Time-of-Flight

with Polarization Analysis Spectrometer

28/09/12 Folie 19


Magnets for neutron scattering

Neutron spin echo spectrometer (NSE)at SNS, Oak Ridge

28/09/12 Folie 20


Correction coils for neutron scattering

Pythagoras coil for correction of solenoid field.

28/09/12 Folie 21


Medical application Combined Split Gradient coil for MRI /PET

gradient coil

cancellation

Design by M. Poole, INM

dBz/dx

28/09/12 Folie 22

Characterization of the heat conductivity of a Papyex layer between a molybdenum mirror

and a cooling plate

ITER material tests

28/09/12 Folie 23

Thermal stress tests of mirrors, to be installed at the front part of the ITER CXRS-

diagnostic “port plug”

ITER CXRS-diagnostic

Experimental setup at ZAT


Inlet System for HALO

shroud

outer deceleration tubeinner deceleration tube

vacuum tube

UV-devicepylon

viewport cap

LIFlaser-induced fluorescence

nozzle

air with free radicalsrestrictor

HALO = high altitude and long range research aircraft

Inlet system for LIF device(measuring radicals)

principle set-up


Inlet System for HALO

The ‘Bird strike’ load case is a critical design issue for the inlet system The inlet system must be robust enough to avoid impact of broken-off parts into

the engines or the tail assembly But if the inlet system is too stiff and totally ‘captures’ a bird (this would be the

case if the restrictor is fixed to the inlet tubes) the aircraft shell can be seriously damaged


Inlet System for HALO bird strike simulation

Workshop EDM Searches at Storage Rings,

Trento, October 1-5, 2012 Technology for World-Class Research Helmut Soltner

Rhizotron facility

54 transparent tubes (each 7m long) and 108 humidity-sensors were buried in the ground of a test field.

One end of each tube is accessible through a basement-building.

Aim of the experiments: Measuring the root density and humidity conditions with cameras and radar antennas


Central Institute of Technology – ZATRésumé

ZAT: Technology for R&D

Partner for national and international scientific projects

Projects from some k€ up to several years and M€

Internal partners/customers, also externals

All from one source!!!

georgian-german workshop on basic sciencecentral institute of technology - zatslide 1 tbilisi,...

Documents

technology institute

information technology

technology consultancy

research institutes

zat mission zat

research center

zat competences

institutes total personnel