glass etching & staining powerpoint
DESCRIPTION
TRANSCRIPT
Glass Etching & Staining
What Is Glass Etching?Glass Etching: the process of treating areas of glass
to create a roughened, frosted glass design.
Glass Etching Cream: contains a diluted acid that lightly eats awayat the surface of glass
Example: Armour Etch® is commonbrand of glass etching cream
Etching Process1. Create your design using
masking tape.
2. Wash glass well in warm, soapy water and dry completely.
3. Apply your masking tape design onto the plate.
4. Use a popsicle stick to seal down every single edge of tape.
Etching Process5. Use a sponge brush to apply a thick
layer of etching cream to the exposed glass portions of your plate. Let etching cream sit for 15 minutes.
6. Rinse the cream thoroughly with warm water. Remove masking tape and throw away in the garbage can.
Your etched design will be visibleonce glass is completely dry!
Rub ‘N Etch Kits• Apply etching stencil to clean glass with
popsicle stick• Brush on etching cream• Let sit, then wash off cream
and stencil with water
What Is Glass Staining?Glass Staining: creating a design
using liquid leading, and then painting color onto glass creating a transparent effect
Glass stain can be applied to anything glass: ornaments, suncatchers, glass bottles, windows, dishes, vases…
Liquid Leading Process1. Sketch the design you will be
leading and staining onto your bowl.
2. Wash bowl well in warm, soapy water. Rinse with warm water. Dry completely.
3. Hold Liquid Leading bottle 1-inch above the surface of your bowl, and squeeze to create your design. Let dry overnight.
Staining Process4. To stain glass, dip brush
desired color and drip stain onto segments of your bowl. Gently spread stain until it covers entire segment.
5. Leave your glass bowl to dry for a few days to seal your design.