GRUNDFOS DATA BOOKLET

NB32-125.1/140 A-F2-A-BAQE Grundfos pump 97839212

Thank you for your interest in our products. Please contact us for more information, or visit our website

https://www.lenntech.com/grundfos/NB000/97839212/NB-32-125-1-140-A-F2-A-E-BAQE.html

info@lenntech.comtel. +31 152 610 900 fax. +31 152 616 289

BE > THINK > INNOVATE

Printed from Grundfos Product Centre [2018.06.003]

Position Qty. Description1 NB 32-125.1/140 A-F2-A-E-BAQE

Product No.: On request

Non-self-priming, single-stage, centrifugal volute pump designed according to ISO 5199 withdimensions and rated performance according to EN 733 (10 bar). Flanges are PN 16 with dimensionsaccording to EN 1092-2. The pump has an axial suction port, radial discharge port, horizontal shaft anda back pull-out design enabling removal of the motor, motor stool, cover and impeller without disturbingthe pump housing or pipework.

The unbalanced rubber bellows seal is according to DIN EN 12756.The pump is close-coupled to a fan-cooled asynchronous motor.

Further product detailsThe product's minimum efficiency index (MEI) is greater or equal to 0.70. This is by the CommissionRegulation (EU) considered as an indicative benchmark for best-performing water pump available onthe market as from 1 January 2013.

The back pull-out design means that the pump can be serviced by a single person without disturbingthe pump housing or pipe work.

Cast-iron parts have an epoxy-based coating made in a cathodic electro-deposition (CED) process.CED is a high-quality dip-painting process where an electrical field around the products ensuresdeposition of paint particles as a thin, well-controlled layer on the surface. An integral part of theprocess is a pretreatment. The entire process consists of these elements:1) Alkaline-based cleaning.2) Zinc phosphating.3) Cathodic electro-deposition.4) Curing to a dry film thickness 18-22 my m.The colour code for the finished product is NCS 9000/RAL 9005.

PumpThe pump housing has both a priming and a drain hole closed by plugs.The impeller is a closed impeller with double-curved blades with smooth surfaces. The impeller isstatically balanced according to ISO 1940-1 class G6.3 and hydraulically balanced to compensate foraxial thrust.Wear rings used in pump housing and for impeller are made of bronze/brass or cast iron.

Motor stool and pump cover are made of cast iron (EN-GJL-250). Coupling guards are fitted to themotor stool. The pump cover is provided with a manual air vent screw for venting of the pump housingand the shaft seal chamber.

The pump is fitted with an unbalanced rubber bellows seal with torque transmission across the springand around the bellows. Due to the bellows, the seal does not wear the shaft, and the axial movementis not prevented by deposits on the shaft.Primary seal:

• Rotating seal ring material: carbon graphite, metal-impregnated• Stationary seat material: silicon carbide (SiC)

This material pairing has a very good corrosion resistance and is especially suitable for water up to 120°C. However, seal life will be reduced at temperatures above 90 °C. The material pairing is notrecommended for liquids containing particles as this will result in heavy wear on the SiC face.

1/12

Printed from Grundfos Product Centre [2018.06.003]

Position Qty. DescriptionSecondary seal material: EPDM (ethylene-propylene rubber)EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.

MotorThe motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards.Electrical tolerances comply with IEC 60034.

The motor efficiency is classified as IE3 in accordance with IEC 60034-30-1.The motor does not incorporate motor protection and must be connected to a motor-protective circuitbreaker which can be manually reset. The motor-protective circuit breaker must be set according to therated current of the motor (I1/1).

The motor can be connected to a variable speed drive for adjustment of pump performance to any dutypoint. Grundfos CUE offers a range of variable speed drives. Please find more information in GrundfosProduct Center.

Technical data

Liquid:Pumped liquid: WaterLiquid temperature range: 0 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³

Technical:Rated flow: 23.3 m³/hRated head: 22.4 mActual impeller diameter: 140 mmImpeller nom: 125.1 mmPrimary shaft seal: BAQESecondary shaft seal: NONECurve tolerance: ISO9906:2012 3B

Materials:Pump housing: Cast iron

EN-GJL-250ASTM A48-40 B

Impeller: Cast ironEN-GJL-200ASTM A48-30 B

Shaft: Stainless steel1.4301304

Rubber: EPDMWear ring mat.: High alloy brass(CuZn34Mn3AI2

Installation:Maximum ambient temperature: 60 °CMaximum operating pressure: 16 barFlange standard: EN 1092-2Pump inlet: DN 50Pump outlet: DN 32Pressure rating: PN 16

Electrical data:Motor type: 90LCIE Efficiency class: IE3Rated power - P2: 2.2 kWMains frequency: 50 HzRated voltage: 3 x 220-240D/380-415Y VRated current: 7.70/4.45 AStarting current: 850-950 %Cos phi - power factor: 0.89-0.87Rated speed: 2890-2910 rpm

2/12

Printed from Grundfos Product Centre [2018.06.003]

Position Qty. DescriptionEfficiency: IE3 85,9%Motor efficiency at full load: 85.9 %Motor efficiency at 3/4 load: 86.8 %Motor efficiency at 1/2 load: 86.0 %Number of poles: 2Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): FLubricant type: Grease

Others:Minimum efficiency index, MEI ≥: 0.70ErP status: EuP Standalone/Prod.Net weight: 46 kgGross weight: 56 kgShipping volume: 0.178 m³

3/12

Printed from Grundfos Product Centre [2018.06.003]

On request NB 32-125.1/140 A-F2-A-E-BAQE 50 HzH

[m]

0

5

10

15

20

25

30

Q [m³/h]0 2 4 6 8 10 12 14 16 18 20 22 24

eta[%]

0

20

40

60

80

100

NB 32-125.1/140, 3*400 V, 50Hz

140 mm

P[kW]

0.0

0.5

1.0

1.5

2.0

2.5

3.0

NPSH[m]

0.0

0.5

1.0

1.5

2.0

2.5

3.0

P1

P2

4/12

Printed from Grundfos Product Centre [2018.06.003]

H[m]

0

5

10

15

20

25

30

Q [m³/h]0 5 10 15 20

eta[%]

0

20

40

60

80

100

NB 32-125.1/140, 3*400 V, 50Hz

140 mm

P[kW]

0.0

0.5

1.0

1.5

2.0

2.5

NPSH[m]

0.0

0.5

1.0

1.5

2.0

2.5P1

P2

4 x 19

4 x 19

50

80

226 321 100

110

32

140

112

5012

140

70

200

162

103

117 117

100 190

L1 L2 L3

L3L2L1

LOW VOLTAGEDIRECTION OF ROTATION

HIGH VOLTAGEDIRECTION OF ROTATION

Description ValueGeneral information:

Product name: NB 32-125.1/140A-F2-A-E-BAQE

Product No: On requestEAN number: On requestTechnical:Rated flow: 23.3 m³/hRated head: 22.4 mActual impeller diameter: 140 mmImpeller nom: 125.1 mmPrimary shaft seal: BAQESecondary shaft seal: NONEShaft diameter: 24 mmCurve tolerance: ISO9906:2012 3BPump version: AMaterials:Pump housing: Cast iron

EN-GJL-250ASTM A48-40 B

Impeller: Cast ironEN-GJL-200ASTM A48-30 B

Shaft: Stainless steel1.4301304

Material code: ARubber: EPDMCode for rubber: E

Wear ring mat.: High alloybrass(CuZn34Mn3AI2

Installation:Maximum ambient temperature: 60 °CMaximum operating pressure: 16 barFlange standard: EN 1092-2Pump inlet: DN 50Pump outlet: DN 32Pressure rating: PN 16Wear ring(s): neckring(s)Connect code: F2Liquid:Pumped liquid: WaterLiquid temperature range: 0 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³Electrical data:Motor type: 90LCIE Efficiency class: IE3Rated power - P2: 2.2 kWMains frequency: 50 HzRated voltage: 3 x 220-240D/380-415Y VRated current: 7.70/4.45 AStarting current: 850-950 %Cos phi - power factor: 0.89-0.87Rated speed: 2890-2910 rpmEfficiency: IE3 85,9%Motor efficiency at full load: 85.9 %Motor efficiency at 3/4 load: 86.8 %Motor efficiency at 1/2 load: 86.0 %Number of poles: 2Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): FMotor protec: NONEMotor No: 87220292Mount. design. acc. IEC 34-7: IM V1/B5

4 x 19

4 x 19

8022632110032

5012

70

103

117117100190

5/12

Printed from Grundfos Product Centre [2018.06.003]

Description ValueLubricant type: GreaseOthers:Minimum efficiency index, MEI ≥: 0.70ErP status: EuP Standalone/Prod.Net weight: 46 kgGross weight: 56 kgShipping volume: 0.178 m³

6/12

Printed from Grundfos Product Centre [2018.06.003]

On request NB 32-125.1/140 A-F2-A-E-BAQE 50 Hzcos phi

eta

0.0

0.2

0.4

0.6

0.8

P2 [kW]0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0

I[A]

0

2

4

6

8

NB32-125.1/140 + 90LC 2.2 kW 3*400 V, 50 Hz

eta

cos phi

I

n[rpm]

2000

2200

2400

2600

2800

P1[kW]

0.0

1.0

2.0

3.0

4.0

n

P1

7/12

Printed from Grundfos Product Centre [2018.06.003]

On request NB 32-125.1/140 A-F2-A-E-BAQE 50 Hz

Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.

4 x

19

4 x

1950

80

226

321

100

110

32

140 112

5012

140

70

200

162

103

117

117

100

190

8/12

Printed from Grundfos Product Centre [2018.06.003]

Exploded view

301a

219

92

7

7a

77

301a

92

11

9

51

100

49

105

45

215a

215

18

217215a

534a534

531531a

28

17

251d

251a

6

11b

66a

67

530530a

9/12

Printed from Grundfos Product Centre [2018.06.003]

Sectional drawing (TM058200 for TPE2,TPE3)

4

2 13

5

TM058200

10/12

Printed from Grundfos Product Centre [2018.06.003]

Exploded view ( TM057026 for MGE model H/I )

251d

251b

290

287277a

286

277

273a

273

268268a289a289

288b288288a

251a

252b

156c

159d

156b

156d188

275a

153

154

158

178

185

192

191

159e

156c 156

151152

266

187

291

293

252a

172

150

287a

502

273b

157

11/12

Printed from Grundfos Product Centre [2018.06.003]

Parts list NB 32-125.1/140, Product No. On requestValid from 1.3.2011 (1109)

Pos Description Annotation Données de classification Référence Quantité Unité+ Motor 1 pcs- Nut 1 pcs

66 Washer 166a Spring lock washer 167 Nut Thread: M14 1

- Motor stool cpl. 1 pcs1a Motor stool 17 Coupling guard 29 Hex socket head cap screw Length (mm): 30 4

Thread: M1077a Pan head screw 4

- Pump housing cpl. 1 pcs6 Pump housing 136 Nut Thread: M10 6

- Stub shaft 1 pcs9 Socket set screw Length (mm): 6 2

Thread: M811 Parallel key Dimension: 6X6X35 151 Pump shaft 117 Air vent screw 1 pcs

- 20 Plug 1 pcs19 Pipe plug Thread: R 3/8 249 Impeller Outer diameter: 125 1 pcs72a O-ring Diameter: 177,39 1 pcs

Material type: EPDMThickness: 3,53

105 Shaft seal Material type: BAQE 1 pcs

12/12

Disclaimer: The information about the Grundfos pump in this document may be outdated. Data may be subject to alterations without further notice. Please contact us to verify the data above is still accurate/up-to-date.

All information is copyright Grundfos.

info@lenntech.comhttps://www.lenntech.comtel. +31 152 610 900 fax. +31 152 616 289