Guide to using Strucad’s Guide to using Strucad’s drawing viewerdrawing viewer

Provided By Provided By Network Drafting Service Network Drafting Service Pty LtdPty Ltd

1. Ensure that both struwalk.exe and SpfView.exe 1. Ensure that both struwalk.exe and SpfView.exe have been installed.have been installed.

First enter the start bar First enter the start bar at the bottom left of at the bottom left of your windows tool bar.your windows tool bar.

Click “ My Computer ”.Click “ My Computer ”. Select your disk drive Select your disk drive

and double click. and double click. Open the folder ( in this Open the folder ( in this

example the folder is example the folder is labeled burn 4270 )labeled burn 4270 )

Enter the folder labeled Enter the folder labeled ‘ Redist ’ ‘ Redist ’

Inside are folders Inside are folders ‘struwalker’ and ‘struwalker’ and ‘spfviewer’.‘spfviewer’.

Double click on each Double click on each icon and follow the icon and follow the prompts to install.prompts to install.

2. Open StruCad Drawing Package .zpf2. Open StruCad Drawing Package .zpf

Open folder ZPFOpen folder ZPF Double click icon inside.Double click icon inside.

To ensure printing and operations go smoothly To ensure printing and operations go smoothly extract the file to your hard drive. extract the file to your hard drive.

Click to continue stepClick to continue step

File --> extract package (to C drive).File --> extract package (to C drive).

Choose Choose your hard your hard drive or a drive or a preferred preferred location.location.

To view drawingsTo view drawings

Simply click on Simply click on the desired the desired drawing in the drawing in the appropriate appropriate subfoldersubfolder

This is an This is an example of example of what may what may appear.appear.

To Print DrawingsTo Print Drawings

The most time The most time efficient way is to efficient way is to hold down the hold down the shift key select shift key select the top drawing the top drawing so it is so it is highlighted. highlighted.

Then select the Then select the last drawing in last drawing in that sub folder.that sub folder.

They should then They should then all appear high all appear high lighted lighted (like example)(like example)

Continue this Continue this step in all step in all drawing sub drawing sub folders folders (GA’s, Views etc.)(GA’s, Views etc.)

Once all are Once all are highlighted press highlighted press the print button.the print button.

* not possible to * not possible to print reports from print reports from this program*this program*

Created for your Created for your

ConvenienceConvenience Network Drafting ServicesNetwork Drafting Services Pty Ltd Pty Ltd

13 / 4 University Drive13 / 4 University Drive

Robina 4226 QLD AustraliaRobina 4226 QLD Australia

PH : 07 55 788 736 PH : 07 55 788 736

FAX : 07 55 788 731 FAX : 07 55 788 731

MOB : 0410 440 393MOB : 0410 440 393

Email : Email : nds888@netspace.net.aunds888@netspace.net.au

Thank you . . .