hi-tech 230
TRANSCRIPT
1
Hi-TECH 2308-10” Chucker Box Way TypeHorizontal Turning Center
Contents
Product Overview
Basic Information
Detailed Information
04
07
08
12
13
21
Basic Structure
Cutting Performance
Standard / Optional Accessories Status
Hwacheon Software
Diagram
Machine / NC Specifications
3
New Standard for 8-10” Lathe Faithful to the BasicsHi-TECH 230 provides more reliable machining performance based on
excellent machine rigidity and upgraded specifications compared to
the existing 8-10” lathes with box-way structure, and provides greatly
enhanced user convenience and maintainability. The Y-axis model has
Y-axis stroke of up to ±60 mm (±2.36 inch), the largest in class.
Upgrades for Enhanced Machining Performance
Easy Maintenance
Enhanced feed system rigidity for X and Y axes
Enhanced machine structure rigidity
Upgraded main spindle motor
The highest turnmill motor power in class
Extended max bar diameter
Possible to apply the 24 positions index turret
Coolant tank placed at the front and easy to remove
Coolant level sensor applied as standard
Use of external coolant block prevents the leakage of turret inside
1
Enhanced User Convenience
Lighter door to ease the operator's tiredness
Structure to prevent chip accumulation in
the door bottom
90˚ rotating operator panel
Optional software for user convenience
(Operating and machining)
2
1
4
2
3
1
4
2
5
3
6
3
Product Overview
4 HWACHEON CATALOG : Hi-TECH 230
The largest Y-axis stroke in its class
"Maximized Y-axis Machining Performance"
Type Chuck Sizeinch
Max Stroke mm (inch) Rapid Speed m/min (ipm)
X-axis Z-axis Y-axis X-axis Z-axis Y-axis
Hi-TECH 230A/AL/AXL 8
240 (9.45)460 (18.11)
L:700 (27.56)XL:1,200 (47.24)
±60 (±2.36) 30 (1,181) 30 (1,181) 10 (394)Hi-TECH 230B/BL/BXL10
Hi-TECH 230C/CL/CXL
Basic Structure
Y-axis Machining
Ø425 mm (Ø16.73 inch)
1,143 mm (45 inch)
Max Cutting Dia
Max Cutting Length
* Based on Hi-TECH 230AXL STD
Basic Information
"Increased Structural Rigidity of the Machine"via FEM Analysis
The cutting area and the feed zone are separated to
"Minimize Thermal Displacement of the Frame"caused by hot chips and coolant
"Slanted Bed Structure"for easy chip disposalX-axis
Z-axis
Y-axis
Ys-axis
Max Cutting Dia
Max Cutting Length "The Largest Cutting Area in its Class"
* Y-axis is YMC / YSMC Type Only.* L : Long Bed , XL : Extra Long Bed.
Finishing using Y-axis Multi-face machining
Milling at the position deviated from the center
Circular interpolation for X and Y axes
Y-axis
X + C -axis
X + Y-axis
Y-axis
X-axis
Y-axis
X-axis
Ys-axis
X-axisY-axis
Slanted Bed
Type Y-axis Stroke mm (inch)
Y-axis Rapid Speed m/min (ipm)
Inclination Angle (deg)
Slanted Bed X-axis X-Ys axis
Hi-TECH 230 SERIES Y(S)MC ±60 (±2.36) 10 (394) 30
5
Enhanced high-power motor
compared to existing 8-10” lathes
"Enhanced Cutting Performance and Productivity"
Type Max Spindle Speedrpm
Spindle MotorkW (HP)
Spindle TorqueNm
Max Bar Sizemm (inch)
Type of Spindle NoseASA
Hi-TECH 230A/AL/AXL 4,50018.5 / 15 (25 / 20)
330 Ø65 (Ø2.56) A2-6
Hi-TECH 230B/BL/BXL3,500
410Ø81 (Ø3.19) A2-8
Hi-TECH 230C/CL/CXL 22 / 18.5 (29 / 25) 703.5
Main Spindle
Tailstock
4,500 rpm
18.5 kW
Max Spindle Speed
Spindle Motor
* Based on Hi-TECH 230A
Minimized equipment installation space and placed the main spindle motor in a way to ensure easy application of the bar feeder
Application area of the bar feeder
Its digital tailstock (hydraulic) makes setting materials convenient and
implements fast cycle time as its setting time is shorter than that of a
conventional equipment
"Setting Time Reduced by 70% or More"
Type Max Stroke mm (inch)
Cylinder Diamm (inch)
Center TaperMT
Hi-TECH 230A/AL
460 (18.11)/ L:700 (27.56) Ø65 (Ø2.56) #5Hi-TECH 230B/BL
Hi-TECH 230C/CL
Type Max Stroke mm (inch)
Quill Strokemm (inch)
Cylinder Diamm (inch)
Center TaperMT
Hi-TECH 230AXL
1,080 (42.52) 120 (4.72) Ø100 (Ø3.94) #5Hi-TECH 230BXL
Hi-TECH 230CXL
* Comparison of tailstock setting times when the 200 mm (7.87 inch) material is used
Short Type / Long Type
The Quill is activated by foot pedal or program.
Tailstock body of standard machine can be positioned by operator.
Extra Long Type
6 HWACHEON CATALOG : Hi-TECH 230
Turret
Feed System
Type Number of Tool StationsTool Size
mm (inch)Turret Indexing Time
sec/stepMax Speed of Rotating Tool
rpmDisk Widthmm (inch)
STD 12
O.D:□25 (□1)
I.D:Ø40 (Ø1.5)0.344
-
100 (3.94)MC / YMC
SMC / YSMC12 (24 Positions Index) 5,000
Basic Information
4
3
Cu
rvic
1 2
Changed fixed point of X-axis ball screw to minimize
the machining error.
"Minimized Machining Error Caused by Thermal
Displacement"
The guide way contact area is increased by 40%.
"Reinforced Feed System Rigidity"
"Easy Precision Control Using GIB"
GIB Mounting area
Hi-TECH 230
Existing 8-10” lathes
Its external coolant block prevents leakage (cause of
failure) of turret inside from the source.
The largest turnmill motor in class : 5.5 / 3.7 kW
Extended turret disk width
- Standard model: The disk width extended by 25% compared
to the existing model
- MC model: BMT65 applied
Enhanced turret rigidity : The reduced distance between the disk and the curvic coupling decreases the moment imposed on
the curvic by 24%. Possible to apply 24 positions index turret
1
2
3
4
5
·Double O.D Holder ·Double I.D Holder
*The turret indexing time is the individual time based on 12 stations.
Machining direction
Fixed point of ball screw
77
Process Tap SizeCutting Speedm/min (ipm)
Feedmm/rev
Spindle Speed rpm
Tapping Depthmm (inch)
Axial(Z-axis) M16 30 (1,181) 2.0 597 25 (0.98)
O.D Cutting
Material Diamm (inch)
Cutting Speedm/min (ipm)
Feedmm/rev
Spindle Speedrpm
Cutting Depthmm (inch)
Material Removal Ratecm3/min
182 (7.17) 220 (8,661) 0.27 421 6 (0.24) 356.4
U-Drill
Turnmill Drill
Tool Diamm (inch)
Cutting Speedm/min (ipm)
Feedmm/rev
Spindle Speedrpm
Cutting Depthmm (inch)
Material Removal Ratecm3/min
55 (2.17) 120 (4,724) 0.18 694 50 (1.97) 297
Tool Diamm (inch)
Cutting Speedm/min (ipm)
Feedmm/rev
Spindle Speedrpm
Cutting Depthmm (inch)
Material Removal Ratecm3/min
20 (0.79) 30 (1,181) 0.1 478 30 (1.18) 15
Face Cutter
Tool Diamm (inch)
Cutting Speedm/min (ipm)
Feedmm/min
Spindle Speedrpm
Cutting Depthmm (inch)
Material Removal Ratecm3/min
63 (2.48) 198 (7,795) 300 1,000 4 (0.16) 75.6
Groove
Cutting Speedm/min (ipm)
Insert Widthmm (inch)
Feedmm/rev
Material Removal Ratecm3/min
150 (5,906) 5 (0.2) 0.25 187.5
I.D Cutting
Turnmill Tap
ProcessMaterial Diamm (inch)
Cutting Speedm/min (ipm)
Feedmm/rev
Spindle Speedrpm
Cutting Depthmm (inch)
Finishing 70.1 (2.76) 150 (5,906) 0.1 680 0.1 (0.004)
Roughing 72.5 (2.85) 100 (3,937) 0.34 428 1 (0.04)
Cutting Performance : Hi-TECH 230A
Existing 8-10” lathes
* The machining results above are examples based on the factory test standards, and are subjected to the changes in conditions.
Material : Carbon Steel (SM45C)
8 HWACHEON CATALOG : Hi-TECH 230
1
Main Chuck
8 inch S S S S S S S S S S S S S
2 10 inch X X X X X X X X X X X X X
3 No Chuck O O O O O O O O O O O O O
4Sub Chuck
6 inch X X X X X X S S X X X S S
5 No Chuck X X X X X X O O X X X O O
6Jaw
Soft Jaw S S S S S S S S S S S S S
7 Hard Jaw O O O O O O O O O O O O O
8
Chucking
Chucking Pressure Check Switch O O O O O O O O O O O O O
9 Dual Pressure (C-axis brake) X O O X O O O O X O O O O
10 Dual Pressure (Chuck) O O O O O O O O O O O O O
11 Chuck Pressure Compensation O O O O O O O O O O O O O
12 Chuck Clamp / Unclamp Switch O O O O O O O O O O O O O
13
Turret
Standard (12 Station turret with Turning Tool only) S X X S X X X X S X X X X
14 BMT65 Turnmill (12 Station turret with Turnmill) X S S X S S S S X S S S S
15 24 Positions (12 Station turret with Turnmill) X S S X S S S S X S S S S
16 Axial Driven Holder (BMT65) X O O X O O O O X O O O O
17 Radial Driven Holder (BMT65) X O O X O O O O X O O O O
18 U-Drill Holder Cap S S S S S S S S S S S S S
19 Double O.D Holder (for 24 Positions, 20X20) (Main / Sub) X O O X O O O O X O O O O
20 Double O.D Holder (for 24 Positions, 25X25) (Main & Sub) X X X X X X S S X X X S S
21 Double I.D Holder (for 24 Positions, Ø25) X O O X O O O O X O O O O
22 Double I.D Holder (for 24 Positions, Ø32) X X X X X X S S X X X S S
23 VDI 40 (12 Station turret with 12 positions and Turning Tool only) O X X O X X X X O X X X X
24 VDI 40 Turnmil (12 Station turret with 12 positions) X O O X O O O O X O O O O
25 VDI 40 O.D Holder O O O O O O O O O O O O O
26 VDI 40 I.D Holder O O O O O O O O O O O O O
27 VDI 40 Face Holder O O O O O O O O O O O O O
28 Axial Driven Holder (for VDI 40 Turnmill) X O O X O O O O X O O O O
29 Radial Driven Holder (for VDI 40 Turnmill) X O O X O O O O X O O O O
30 U-Drill Holder (for VDI 40) O O O O O O O O O O O O O
31
Tailstock
Digital Tailstock (use Hydraulic Cylinder) S S S S S S X X X X X X X
32 Servo Tailstock (use Servo Motor & Ball Screw) O O O O O O X X O O O X X
33 Body & Quill Programmable Tailstock X X X X X X X X S S S X X
34 Steady RestBase for Steady Rest *Selecting both the Steady rest base and part catcher to be installed is not possible.
X X X X X X X X O O O X X
35Coolant Pump
0.05 MPa S S S S S S S S S S S S S
360.6 / 1.5 / 3 / 7 MPa*For 7 MPa, only water soluble coolants are available
O O O O O O O O O O O O O
37
Coolant Options
Coolant Gun O O O O O O O O O O O O O
38 Coolant Blow O O O O O O O O O O O O O
39 Coolant Level Sensor S S S S S S S S S S S S S
40 Coolant Chiller O O O O O O O O O O O O O
41 Oil Skimmer O O O O O O O O O O O O O
42 Large Capacity Coolant Tank O O O O O O O O O O O O O
43
Chip Disposal
Air Blower O O O O O O S S O O O S S
44 Side / Back Type Chip Conveyor (Hinge / Scraper Type)*Back type can be used only in short type
O O O O O O O O O O O O O
45 Mist Collector (Interface) O O O O O O O O O O O O O
46
Automation
Tool Presetter (Manual / Automation) O O O O O O O O O O O O O
47 Parts Catcher (Main) O O O O O O O O O O O O O
48 Parts Catcher (Sub) *Selecting both sub spindle part catcher and main spindle part catcher to be installed is not possible.
X X X X X X X O X X X X X
49 Workpiece Air Ejector & Through Coolant (for Sub Spindle) X X X X X X O O X X X O O
50 Barfeeder Interface O O O O O O O O O O O O O
51 Auto Door O O O O O O O O O O O O O
52 Part Conveyor O O O O O O O O O O O O O
53 Robot Interface O O O O O O O O O O O O O
54 Tool & Work Counter (Internal / External) O O O O O O O O O O O O O
55
Software
Tool Load Detect (L-HTLD) S S S S S S S S S S S S S
56 Arbitrary Speed Threading O O O O O O O O O O O O O
57 Tool Life Management S S S S S S S S S S S S S
58 Automatic Tool Offset (Tool Presetter option is required) S S S S S S S S S S S S S
59 Lathe Calculator Function (L-CAL) S S S S S S S S S S S S S
60 Work / Tool Management (L-COUNT) S S S S S S S S S S S S S
61 Workpiece Clamp of Chuck (L-WCMP) O O O O O O O O O O O O O
62 Monitoring Solution of Real-time Operational Status (M-VISION Pro) O O O O O O O O O O O O O
63 Hwacheon Lathe Vibration Control System (HLVC) S S S S S S S S S S S S S
64 M-Code & G-Code List Help S S S S S S S S S S S S S
65
ETC
Linear Scale (X / Z) O O O O O O O O O O O O O
66 NC Cooler O O O O O O O O O O O O O
67 Signal Lamp with 3 Color (R / G / Y) S S S S S S S S S S S S S
68 Transformer O O O O O O O O O O O O O
69 Manual Guide i S S S S S S S S S S S S S
70 15” Non touch display S S S S S S S S S S S S S
71 15” Touch type display O O O O O O O O O O O O O
NO. Item DescriptionHi-TECH 230A Hi-TECH 230AL Hi-TECH 230AXL
STD MC YMC STD MC YMC SMC YSMC STD MC YMC SMC YSMC
Detailed InformationStandard / Optional Accessories Status S : Standard O : Option X : Not available
9
1
Main Chuck
8 inch X X X X X X X X X X X X X
2 10 inch S S S S S S S S S S S S S
3 No Chuck O O O O O O O O O O O O O
4Sub Chuck
6 inch X X X X X X S S X X X S S
5 No Chuck X X X X X X O O X X X O O
6Jaw
Soft Jaw S S S S S S S S S S S S S
7 Hard Jaw O O O O O O O O O O O O O
8
Chucking
Chucking Pressure Check Switch O O O O O O O O O O O O O
9 Dual Pressure (C-axis brake) X O O X O O O O X O O O O
10 Dual Pressure (Chuck) O O O O O O O O O O O O O
11 Chuck Pressure Compensation O O O O O O O O O O O O O
12 Chuck Clamp / Unclamp Switch O O O O O O O O O O O O O
13
Turret
Standard (12 Station turret with Turning Tool only) S X X S X X X X S X X X X
14 BMT65 Turnmill (12 Station turret with Turnmill) X S S X S S S S X S S S S
15 24 Positions (12 Station turret with Turnmill) X S S X S S S S X S S S S
16 Axial Driven Holder (BMT65) X S S X S S S S X S S S S
17 Radial Driven Holder (BMT65) X S S X S S S S X S S S S
18 U-Drill Holder Cap S S S S S S S S S S S S S
19 Double O.D Holder (for 24 Positions, 20X20) (Main / Sub) X O O X O O O O X O O O O
20 Double O.D Holder (for 24 Positions, 25X25) (Main & Sub) X X X X X X S S X X X S S
21 Double I.D Holder (for 24 Positions, Ø25) X O O X O O O O X O O O O
22 Double I.D Holder (for 24 Positions, Ø32) X X X X X X S S X X X S S
23 VDI 40 (12 Station turret with 12 positions and Turning Tool only) O X X O X X X X O X X X X
24 VDI 40 Turnmil (12 Station turret with 12 positions) X O O X O O O O X O O O O
25 VDI 40 O.D Holder O O O O O O O O O O O O O
26 VDI 40 I.D Holder O O O O O O O O O O O O O
27 VDI 40 Face Holder O O O O O O O O O O O O O
28 Axial Driven Holder (for VDI 40 Turnmill) X O O X O O O O X O O O O
29 Radial Driven Holder (for VDI 40 Turnmill) X O O X O O O O X O O O O
30 U-Drill Holder (for VDI 40) O O O O O O O O O O O O O
31
Tailstock
Digital Tailstock (use Hydraulic Cylinder) S S S S S S X X X X X X X
32 Servo Tailstock (use Servo Motor & Ball Screw) O O O O O O X X O O O X X
33 Body & Quill Programmable Tailstock X X X X X X X X S S S X X
34 Steady RestBase for Steady Rest *Selecting both the Steady rest base and part catcher to be installed is not possible.
X X X X X X X X O O O X X
35Coolant Pump
0.05 MPa S S S S S S S S S S S S S
360.6 / 1.5 / 3 / 7 MPa*For 7 MPa, only water soluble coolants are available
O O O O O O O O O O O O O
37
Coolant Options
Coolant Gun O O O O O O O O O O O O O
38 Coolant Blow O O O O O O O O O O O O O
39 Coolant Level Sensor S S S S S S S S S S S S S
40 Coolant Chiller O O O O O O O O O O O O O
41 Oil Skimmer O O O O O O O O O O O O O
42 Large Capacity Coolant Tank O O O O O O O O O O O O O
43
Chip Disposal
Air Blower O O O O O O S S O O O S S
44 Side / Back Type Chip Conveyor (Hinge / Scraper Type)*Back type can be used only in short type
O O O O O O O O O O O O O
45 Mist Collector (Interface) O O O O O O O O O O O O O
46
Automation
Tool Presetter (Manual / Automation) O O O O O O O O O O O O O
47 Parts Catcher (Main) O O O O O O O O O O O O O
48 Parts Catcher (Sub) *Selecting both sub spindle part catcher and main spindle part catcher to be installed is not possible.
X X X X X X X O X X X X X
49 Workpiece Air Ejector & Through Coolant (for Sub Spindle) X X X X X X O O X X X O O
50 Barfeeder Interface O O O O O O O O O O O O O
51 Auto Door O O O O O O O O O O O O O
52 Part Conveyor O O O O O O O O O O O O O
53 Robot Interface O O O O O O O O O O O O O
54 Tool & Work Counter (Internal / External) O O O O O O O O O O O O O
55
Software
Tool Load Detect (L-HTLD) S S S S S S S S S S S S S
56 Arbitrary Speed Threading O O O O O O O O O O O O O
57 Tool Life Management S S S S S S S S S S S S S
58 Automatic Tool Offset (Tool Presetter option is required) S S S S S S S S S S S S S
59 Lathe Calculator Function (L-CAL) S S S S S S S S S S S S S
60 Work / Tool Management (L-COUNT) S S S S S S S S S S S S S
61 Workpiece Clamp of Chuck (L-WCMP) O O O O O O O O O O O O O
62 Monitoring Solution of Real-time Operational Status (M-VISION Pro) O O O O O O O O O O O O O
63 Hwacheon Lathe Vibration Control System (HLVC) S S S S S S S S S S S S S
64 M-Code & G-Code List Help S S S S S S S S S S S S S
65
ETC
Linear Scale (X / Z) O O O O O O O O O O O O O
66 NC Cooler O O O O O O O O O O O O O
67 Signal Lamp with 3 Color (R / G / Y) S S S S S S S S S S S S S
68 Transformer O O O O O O O O O O O O O
69 Manual Guide i S S S S S S S S S S S S S
70 15” Non touch display S S S S S S S S S S S S S
71 15” Touch type display O O O O O O O O O O O O O
NO. Item DescriptionHi-TECH 230B/C Hi-TECH 230BL/CL Hi-TECH 230BXL/CXL
STD MC YMC STD MC YMC SMC YSMC STD MC YMC SMC YSMC
S : Standard O : Option X : Not available
9
Coolant Pump
Coolant LevelSensor
1st Mesh Chip Filter
2nd Mesh Chip Filter
3rd Mesh Chip Filter
10 HWACHEON CATALOG : Hi-TECH 230
Detailed Information
Tool Presetter (OPT) Available functions with automatic tool presetter
- With a simple touch on the sensor, it perfectly sets the coordinate
system (within 15 seconds per tool).
- The tool shape error value is automatically calculated and entered.
- The automatic coordinate system is promptly configured
according to the material geometry.
Parts Catcher - Main / Sub (OPT)The bucket type is designed with connected
linkage applicable to a variety of part shapes.
The bucket catches and carries parts into the
collection box.
Automatic Coolant System (STD)
External Coolant TankA coolant tank is placed at the front of the machine for easy
coolant exchange as well as easy tank cleaning and pump
maintenance. Particularly, it is possible to separate the tank
only without removing the chip conveyor for easy tank
cleaning.
Mesh Chip Filter A 3-layered mesh chip filter, which is able to sort from long
chips to micro chips, extends the service life of the coolant
pump.
Various Options- Standard Coolant Pump : 0.05 MPa
- Optional Coolant Pump
→ 0.6 / 1.5 / 3 / 7 MPa
*For 7 MPa, only water soluble coolants are available
- Oil Skimmer (OPT)
- Lift-up Chip Conveyor : Hinge / Scraper Type (OPT)
- Max machinable workpiece size
→ Ø81 x 160 mm (Ø3.19 x 6.3 inch)
Tank Capacity
Power0.4 kW (for Turret)
* Selecting both sub spindle part catcher and main spindle part catcher to be installed is not possible.
* Sub Spindle Part catcher can be used only in LYSMC* Selecting both the Steady rest base and part catcher to be installed is not possible.
UnitShort Type Long Type XL Type
STD / MC YMC STD / (S)MC Y(S)MC STD / (S)MC Y(S)MC
STD ℓ(gal) 115 (30.38) 125 (33.02) 125 (33.02) 140 (36.98) 150 (39.63) 165 (43.59)
Large (OPT) ℓ(gal) 200 (52.83) 210 (55.48) 210 (55.48) 225 (59.44) 235 (62.08) 250 (66.04)
11
The operator panel is newly
designed from the operator's
viewpoint and thus enhances
the operator's convenience
"User Friendly Design"
Convenient Operator Panel
15” display as standard (Non-touch Type Display)
QWER Key MDI
Part Program Storage Length : 2MB
Number of Register Able Programs : Max 1,000ea
Enhanced operability by optimizing the layout and
improving the touch feeling of control buttons.
Long time continuous DNC operation with
the CF card even without the data server.
90˚ Rotating Operator Panel (STD)
"Enhanced Productivity"
EnhancedProductivity
Reduced Non-cutting Time
Optimized Tuning
HRV3+
Machine Optimization (STD)
The cycle machining as well as the operating time and the acceleration / deceleration speed of feed system are optimized.
Dramatically reduced non-cutting time during machining ensures optimal productivity.
High precision, speed and smoothness are realized using the cutting-edge machining technology.
Machining surface quality enhanced by HRV3+ control.(HRV3+: effectively prevents machine oscillation by controlling the servo current to enhance the machining surface quality.)
12 HWACHEON CATALOG : HI-TECH230
Detailed Information
Hwacheon Software
It monitors the load
factors of spindles and
each axis during lathe
(turnmill) machining and
provides the following
benefits to customers
You can monitor the daily / total production quantity and tool usages.
You can enter values required for machining directly from the
display control panel for an easy calculation without a calculator
To complement the drawback of the proximity switch of which
the position should be adjusted according to the material
diameter, the analog sensor (0-10V) is used to set the distances
of the open and close zones from the operating screen for
enhanced user convenience.
(However, it is necessary to discuss with factory in advance
whether it is possible to mount the analog sensor.)
1. Tool life management
Feed axis
Turnmill
Main / Sub Spindle
2. Optimized process
3. Able to quickly respond to wear and damage of tools
The number of optimal
main spindle speed
The cutting speed
Material removal rate (MRR)
The cutting time View the chuck open / close state
Change the driving condition
according to the chuck type
(inner and outer diameters)
Set the chuck open / close zone
An alarm is generated if the
chuck function fails
- Generates an alarm for excessive insert wear (overload)
- Able to control individual machining conditions per insert wear
- Generates a replacement alarm in the event of an insert damage
L-HTLDLathe Hwacheon ToolLoad Detect system
L-CALLathe Calculator Function
L-COUNTLathe Work / Tool
Counter Management
L-WCMPLathe WorkpieceClamp of Chuck
Reset the current tool counter (NOW)
Reset the total number of machining parts
Reset the number of machining parts
The number ofmachining parts
Tool Count Management : 25 tools
- TOOL replacement forecast through message (ADVANCE)
- Tool replacement notification through alarm (PRESET)
- Display current tool counter status (STAT)
- Counter number display (COUNTER)
- Select tool number (TOOL)
- Display current tool counter (CURRENT)
Lathe Hwacheon Tool Load Detect System (STD)
Work / Tool Counter
Management (STD)
Workpiece Clamp of Chuck
(OPT)Lathe Calculator Function (STD)
L-HTLDLathe Hwacheon ToolLoad Detect system
L-CALLathe Calculator Function
L-COUNTLathe Work / Tool
Counter Management
L-WCMPLathe WorkpieceClamp of Chuck
The number of required parts
(entered by the user)
Total number ofmachining parts
Select Work Counter
Front
1,49
0 (5
8.66
) [ Y
: 1
,652
(65.
04)]
Hei
gh
t - 1
,800
(70.
87) [
Y :
2,1
04 (8
2.83
)]
1,20
0 (4
7.24
)
Side
1,02
5 (4
0.35
) [ Y
: 1
,155
(45.
47)]
70 (2.76)
Handle ~ Door
(Spindle Center)
455.5 (17.93)[ Y : 442.5 (17.42)]
Top
Wid
th -
1,84
9.5
(72.
81) [
Y :
1,9
24.5
(75.
77)]
1,165 (45.87)
385(
15.1
6)51
0.5
(20.
1)
90˚ Rotating
Length : 230A/B S : 2,893 (113.9) / L : 3,133 (123.35) / XL : 3,753 (147.76) 230C S : 2,993 (117.83) / L : 3,233 (127.28) / XL : 3,853 (151.69)
S LLS
Y
Y
Y
Y
Y
230A/B : 198 (7.8)230C : 298 (11.73)
428 (16.85) Added Cover : SMC type only Added Cover : SMC type only900 (35.43)
Hei
gh
t - S
MC
: 1
,934
.5 (7
6.16
)
Large Capacity Coolant Tank (OPT)
400(15.75)
13
Machine Size Y-axis
* Unit : mm (inch)
YShort Type Long Type Extra Long TypeS L XL
S : 2,695 (106.1) / L : 2,935 (115.55) / XL : 3,555 (139.96)S L XL
XLXL
Large Capacity Coolant Tank (OPT) - Length : 230A/B S : 3,293 (129.65) / L : 3,533 (139.09) / XL : 4,153 (163.5) 230C S : 3,393 (133.58) / L : 3,633 (143.03) / XL : 4,253 (167.44)
S LLS
XLXL
14 HWACHEON CATALOG : Hi-TECH 230
Detailed Information
Spindle Power – Torque Diagram
3,500 rpm (Hi-TECH 230B)
Max Power : 18.5 kW (25 HP) / Max Torque : 410 Nm
4,500 rpm (Hi-TECH 230A)
5,000 rpm (Sub Spindle)
Max Power : 18.5 kW (25 HP) / Max Torque : 330 Nm
Max Power : 7.5kW (10 HP) / Max Torque : 86 Nm
1000535
714 2142
2000 3000 4000 4500
Torq
ue
(Nm
)
400
100
200
300
0 0
10
20
0
Pow
er (
kW)
Spindle Speed (rpm)
18.5 kW (15 min, 25%)
15 kW (Cont.)
15 kW (60 min, 40%)
267.9 Nm(60 min, 40%)
200.7 Nm (Cont.)
330 Nm(15 min, 25%)
8.36.7
575 1724To
rqu
e (N
m)
400
100
200
300
0 0
10
20
0 1000431 2000 3000 3500
Pow
er (
kW)
Spindle Speed (rpm)
18.5 kW (15 min, 25%)
15 kW (Cont.)
15 kW (60 min, 40%)
332.5 Nm(60 min, 40%)
249.4 Nm (Cont.)
410 Nm (15 min, 25%)
8.9
7.3
1000
1111833 2500
2000 3000 4000 5000
Torq
ue
(Nm
)
20
40
80
60
0 00
Pow
er (
kW)
Spindle Speed (rpm)
7.5 kW (15 min, 25%)
5.5 kW (Cont.)
5.5 kW (60 min, 40%)
63.1 Nm(60 min, 40%)
47.3 Nm (Cont.)
86 Nm (15 min, 25%)
4
6
8
2
5.9
5,000 rpm (Turnmill)
Max Power : 5.5 kW (7.4 HP) / Max Torque : 52.5 Nm
Torq
ue
(Nm
)
10
20
30
40
50
60
0 0
2
4
6
0 1000 2000 3000 4000 5000Po
wer
(kW
)
Spindle Speed (rpm)
5.5 kW (15 min, 25%)
3.7 kW (Cont.)
3.7 kW (60 min, 40%)
35.4 Nm(60 min, 40%)
26.6 Nm (Cont.)
52.5 Nm (15 min, 25%)
4.78
3.2
1333
3,500 rpm (Hi-TECH 230C)
Max Power : 22 kW (29 HP) / Max Torque : 703.5 Nm
749298.5
2574
Torq
ue
(Nm
)
800
200
400
600
0 0
10
30
20
0 1000500
429 1119
2000 3000 3500
Pow
er (
kW)
Spindle Speed (rpm)
High:22 kW (30 min, 60%)
High:18.5 kW (Cont.)
Low:22 kW (15 min, 15%)
Low:13 kW (Cont.)
High:489.3 Nm (30 min, 60%)
Low:416.1 Nm (Cont.)
High:411.9 Nm (Cont.)
Low:703.5 Nm (15 min, 15%)
16.65
13.88
2500
High Speed (0~3500 rpm)Low Speed (0~1119 rpm)
Electric Conversion 429rpm
5,000 rpm (Sub Spindle) (OPT)
Max Power : 11kW (15 HP) / Max Torque : 126 Nm
1000
1111833 2500
2000 3000 4000 5000
Torq
ue
(Nm
)
20
40
80
100
120
140
60
0 00
Pow
er (
kW)
Spindle Speed (rpm)
11 kW (15 min, 25%)
7.5 kW (Cont.)
7.5 kW (60 min, 40%)
86 Nm(60 min, 40%)
64.5 Nm (Cont.)
126 Nm (15 min, 25%)
4
8
6
12
10
14
2
5.72
3.9
1515
Tool Part name Q'ty Shape
Tool Part name Q'ty Shape
* Unit : ea
* Unit : ea
Axial Turnmill Holder (OPT)
Radial Turnmill Holder (OPT)
[BMT65]
Tooling Diagram
Hi-TECH 230 (Y)MC / (Y)SMC
Hi-TECH 230 STD
▒ Common ▒ (Y)MC ▒ (Y)SMC
(Offset)A
[72 mm (2.83 inch)][YSMC : 72 mm (2.83 inch)
& 95 mm (3.74inch)]
A
95 m
m (3
.74
inch
)
□25 mm (□1 inch)
Block230A, B : 6 Set
230C : 5 Set
Extended O.D Cutting Holder230A, B : 0
230C : 1
Face Holder 1
Ø40 mm (Ø1.5 inch)
I.D Holder 4
Sleeve (Ø12, 1/2”), (Ø16, 5/8”), (Ø20, 3/4”), (Ø25, 1”), (Ø32, 1 1/4”) 1 Set
U-Drill Holder 1
U-Drill Sleeve (Ø20, 3/4”), (Ø25, 1”), (Ø32, 1 1/4”) Each OPT
Socket (MT#1), (MT#2), (MT#3) 1 Set
□25 mm (□1 inch)
O.D Cutting Holder4
2
Sub O.D Cutting Holder 1
Face Holder 1
Extended O.D Cutting Holder230A, B : 0
230C : 1
Double O.D Cutting Holder 1
□20 mm ( □ 0.75 inch)
Double O.D Cutting Holder OPT (Main / Sub)
Ø40 mm (Ø1.5 inch)
I.D Holder2
1
Sleeve (Ø12, 1/2”), (Ø16, 5/8”), (Ø20, 3/4”), (Ø25, 1”), (Ø32, 1 1/4”) 1 Set
Ø32 mm (Ø1.3 inch)
Double I.D Holder 1
Sleeve (Ø6, 1/4”), (Ø8, 5/16”),(Ø10, 3/8”), (Ø12, 1/2”), (Ø16, 5/8”), (Ø20, 3/4”), (Ø25, 1”)
Each OPT
Ø25 mm (Ø1 inch)
Double I.D Holder OPT
Sleeve (Ø6, 1/4”), (Ø8, 5/16”),(Ø10, 3/8”), (Ø12, 1/2”), (Ø16, 5/8”), (Ø20, 3/4”)
Each OPT
U-Drill Holder 1
U-Drill Sleeve (Ø20, 3/4”), (Ø25, 1”), (Ø32, 1 1/4”) Each OPT
Socket (MT#1), (MT#2), (MT#3) 1 Set
ER 32 : Ø3,4,5,6,7,8,9,10,11,12, 13, 14,15, 16, 17, 18, 19, 20ER 32I : Ø1/8”,Ø3/16”, Ø1/4”, Ø5/16”,Ø3/8”,Ø7/16”, Ø1/2",Ø11/16” 1 Set
Cap 12
16 HWACHEON CATALOG : Hi-TECH 230
Detailed Information
Turret Interference Diagram
210 (8.27)35 (1.38)
X-axis Stroke 240 (9.45)
457.5 (18.01)
27.5 (1.08)212.5 (8.37)
Ø255.4 (Ø10.06)
Ø40 (Ø1.57)
Extended OD Holder
(Only C Type)Ø49
0 (Ø
19.2
9)
Ø55
0.46
9 (Ø
21.6
7)
Ø58
9.11
2 (Ø
23.1
9)
Max Cutting Dia. Ø425 (Ø16.73)ST
D Cutti
ng Dia
. Ø21
3.6
(Ø8.
41)
182.5 (7.19)
40 (1.57)
200 (7.87) 40 (1.57)
Max Cutting Dia. Ø
400 (Ø15.75)
STD C
uttin
g Dia
. Ø22
1 (Ø
8.7)
Ø490 (Ø
19.29)
Ø509 (Ø
20.04)
Ø515 (Ø20.28)
Ø605 (Ø23.82)
Ø608 (Ø23.94)
Extended OD Holder
(Only C Type)
Ø40 (Ø1.57)
35 (1.38)
X-axis Stroke 240 (9.45)
457.5 (18.01)
Ø264 (Ø
10.39)
Ø20
(Ø0.
79)
60(2.36)
254.5 (10.02)
99.1 (3.9)
66.9 (2.63) +60
(2.
36)
-60
(2.3
6)
120
(4.7
2)
203 (7.99) 37 (1.46)
X-axis Stroke 240 (9.45)
457.5 (18.01)
Hi-TECH 230A / B / C STD
Hi-TECH 230A / B / C SMC Hi-TECH 230A / B / C YSMC
Hi-TECH 230A / B / C (Y)MC
Hi-TECH 230A / B / C Y-axis Moving Range Hi-TECH 230A / B / C Y-axis Moving Range (Sub Spindle)
* Unit : mm (inch)
457.5 (18.01)
257.5 (10.14)
182.5 (7.19)40
(1.57)
35 (1.38)
200 (7.87) 40 (1.57)
X-axis Stroke 240 (9.45)
Max Cutting Dia Ø400 (Ø15.75)
Max Cutting Dia
Ø280 (Ø11.02)
(Sub Spindle)
STD Cutting Dia Ø226 (Ø
8.9)
Ø40 (Ø1.57)
Ø635 (Ø25)
Ø619 (Ø
24.37)Ø503 (Ø19.8)
Ø597 (Ø23.5)
Ø32
(Ø
1.26
)
Ø20 (Ø0.79)
60(2
.36)
Ø509 (Ø20.04)Ø515 (Ø20.28)Ø277 (Ø
10.91)
457.5 (18.01)
257.5 (10.14)
182.5 (7.19)40
(1.57)
35 (1.38)
200 (7.87) 40 (1.57)
X-axis Stroke 240 (9.45)
Max Cutting Dia Ø400 (Ø15.75)
STD Cutting Dia Ø226 (Ø
8.9)
Ø40 (Ø1.57)
Ø635 (Ø25)
Ø619 (Ø
24.37)Ø503 (Ø19.8)
Ø597 (Ø23.5)
Ø32
(Ø
1.26
)
Ø20 (Ø0.79)
60(2
.36)
Ø509 (Ø20.04)Ø515 (Ø20.28)Ø277 (Ø
10.91)
Max Cutting Dia
Ø280 (Ø11.02)
(Sub Spindle)
72(2.83)182.5 (7.19)
-60
(2.3
6)+
60 (
2.36
)
120
(4.7
2)
43.9 (1.73)
34.6
(1.
36)
180 (7.09)60
(2.36)
76.1 (3) 15 (0.59)
X-axis Stroke 240 (9.45)
457.5 (18.01)
Interference Areawith Sub Spindle
Moving Range
Hi-TECH 230A(L) / B(L) / C(L) STD O.D Hi-TECH 230A(L) / B(L) / C(L) STD I.D
Hi-TECH 230A(L) / B(L) / C(L) MC O.D Hi-TECH 230A(L) / B(L) / C(L) MC I.D
Hi-TECH 230A(L) / B(L) / C(L) MC Axial Hi-TECH 230A(L) / B(L) / C(L) MC Radial
8" Chuck
10" Chuck
Z-axis Stroke 460 (18.11) [L : 700 (27.56)]
A-Type Max Cutting Length 403 (15.87) [L : 643 (25.31)]
B/C-Type Max Cutting Length 379 (14.92) [L : 619 (24.37)]
Tailstock Stroke 460 (18.11) [L : 700 (27.56)]
52(2.05)
X-a
xis
Stro
ke 2
40 (
9.45
)
25 (
0.98
)
2.5
(0.1
)27
.5(1
.08)
212.
5 (8
.37)
50(1.97) 5
(0.2
)
8" Chuck
10" Chuck
Z-axis Stroke 460 (18.11) [L : 700 (27.56)]
A-Type : 405 (15.94) [L : 645 (25.39)]
B/C-Type : 381 (15) [L : 621 (24.45)]
X-a
xis
Stro
ke 2
40 (
9.45
)
Tailstock Stroke 460 (18.11) [L : 700 (27.56)]
90 (
3.54
)
67.5
(2.
66)
212.
5 (8
.37)
52(2.05)27
.5(1
.08) 50
(1.97) 5 (0
.2)
8" Chuck
10" Chuck
Z-axis Stroke 460 (18.11) [L : 700 (27.56)]
A-Type Max Cutting Length 344 (13.54) [L : 584 (22.99)]
B/C-Type Max Cutting Length 320 (12.6) [L : 560 (22.05)]
Tailstock Stroke 460 (18.11) [L : 700 (27.56)]
60(2.36)
X-a
xis
Stro
ke 2
40 (
9.45
)
200
(7.8
7)
42(1.65)
4.5
(0.1
8)25
.5 (
1)
10 (
0.39
) 8" Chuck
10" Chuck
Z-axis Stroke 460 (18.11) [L : 700 (27.56)]
A-Type : 390 (15.35) [L : 630 (24.8)]
B/C-Type : 366 (14.41) [L : 606(23.86)]
X-a
xis
Stro
ke 2
40 (
9.45
)
Tailstock Stroke 460 (18.11) [L : 700 (27.56)]
5 (.
2)77
.5 (
3.05
)
42(1.65)
60(2.36)
55 (
2.17
)27
.6(1
.09)
212.
5 (8
.37)
8" Chuck
10" Chuck
Z-axis Stroke 460 (18.11) [L : 700 (27.56)]
A-Type : 450 (17.72) [L : 690 (27.17)]
B/C-Type : 426 (16.77) [L : 666 (26.22)]
Tailstock Stroke 460 (18.11) [L : 700 (27.56)]
60(2.36)
X-a
xis
Stro
ke 2
40 (
9.45
)
208
(8.1
9)
40(1.57)5
(0.2
)35
(1.
38)
8 (0
.31) 8" Chuck
10" Chuck
Z-axis Stroke 460 (18.11) [L : 700 (27.56)]
A-Type : 351 (13.82) [L : 591 (23.27)]
B/C-Type : 327 (12.87) [L : 567 (22.32)]
X-a
xis
Stro
ke 2
40 (
9.45
)
Tailstock Stroke 460 (18.11) [L : 700 (27.56)]
53(2
.09)
30 (
1.18
)
30 (1.18)25 (0.98)
83 (
3.27
)
32 (
1.26
)
203
(7.9
9)
5 (0
.2)
46(1.81)
17
* Unit : mm (inch)
Moving Range * Unit : mm (inch)
18 HWACHEON CATALOG : Hi-TECH 230
Detailed Information
Hi-TECH 230AL / BL / CL SMC O.D
Hi-TECH 230AL / BL / CL SMC Radial
Hi-TECH 230AL / BL / CL SMC Radial (Sub) - Offset
Hi-TECH 230AL / BL / CL SMC O.D (Sub) Hi-TECH 230AL / BL / CL SMC I.D (Sub)
Hi-TECH 230AL / BL / CL SMC I.D
Hi-TECH 230AL / BL / CL SMC Axial
Hi-TECH 230AL / BL / CL SMC Axial (Sub)
8" Chuck
10" Chuck
6" Chuck
Z-axis Stroke 700 (27.56)
A-Type Max Cutting Length 584 (22.99)
B/C-Type Max Cutting Length 560 (22.05)
B/C-Type Sub Spindle Stroke 640 (25.2)
A-Type Sub Spindle Stroke 665 (26.18)10 (0.39)
9 (0.35)
85 (3.35)168 (6.61)14
2 (5
.6)
58 (
2.28
)
18.5
(0.
73)
X-a
xis
Stro
ke 2
40 (
9.45
)
259 (10.2)
21.5
(0.
85)
8" Chuck
10" Chuck
6" Chuck
Z-axis Stroke 700 (27.56)
630 (24.8)
606 (23.86)
B/C-Type Sub Spindle Stroke 640 (25.2)
A-Type Sub Spindle Stroke 665 (26.18)10 (0.39)
9 (0.35)
41(1.61)
167 (6.57)259 (10.2)
75.5
(2.9
7)88
(3.4
6)
37 (
1.46
)
22 (
0.87
)18
(0.
71)
X-a
xis
Stro
ke 2
40 (
9.45
)
45(1.77)
8" Chuck
10" Chuck
6" Chuck
Z-axis Stroke 700 (27.56)
690 (27.17)
666 (26.22)
B/C-Type Sub Spindle Stroke 640 (25.2)
A-Type Sub Spindle Stroke 665 (26.18)9 (0.35)
50(1.97)
35(1.38)
168 (6.61)
115
(4.5
3)35
(1.
38)
50(1
.97)
8 (0
.31)
X-a
xis
Stro
ke 2
40 (
9.45
)
259 (10.2)
14 (
0.55
)18 (0
.71)
10 (0.39)
8" Chuck
10" Chuck
6" Chuck
Z-axis Stroke 700 (27.56)
591 (23.27)
567 (22.32)
B/C-Type Sub Spindle Stroke 640 (25.2)
A-Type Sub Spindle Stroke 665 (26.18)9 (0.35)
85 (3.35)168 (6.61)259 (10.2)
70 (
2.76
)13
0 (5
.12)
3 (0
.12)
19 (
0.75
)18 (0
.71)X
-axi
s St
roke
240
(9.
45)
10 (0.39)
8" Chuck
10" Chuck
6" Chuck
Z-axis Stroke 700 (27.56)
A-Type Max Cutting Length 591 (23.27)
B/C-Type Max Cutting Length 566 (22.28)
B/C-Type Sub Spindle Stroke 640 (25.2)
A-Type Sub Spindle Stroke 665 (26.18)9 (0.35)
144 (5.67)259 (10.2)101(3.98)
22 (
0.87
)
18(0
.71)
X-a
xis
Stro
ke 2
40 (
9.45
)
22(0.87)
60(2.36)
5(0.2)
200
(7.8
7)
82 (
3.23
)
25(0
.98)
41(1
.61)
65(2
.56)
87(3
.43)
47(1
.85)
76 (2.99)22 (0.87)60
(2.36)
60 (
2.36
)
5 (0.2)
63(2
.48)
65(2
.56)
87(3
.43)
10 (0.39)
8" Chuck
10" Chuck
6" Chuck
Z-axis Stroke 700 (27.56)
B/C-Type Sub Spindle Stroke 640 (25.2)
A-Type Sub Spindle Stroke 665 (26.18)9 (0.35)
46(1.81)
168 (6.61)259 (10.2)
76(2
.99)
82 (
3.23
)
22 (
0.87
)18 (0
.71)X
-axi
s St
roke
240
(9.
45)
39 (1.54)
Max 65 (2.56)
58(2
.28)
142
(5.5
9)40
(1.
57)
8(0.31)
99(3.9)
71 (2.8)
12(0.47)
60(2
.36)
146
(5.7
5)34
(1.3
4)
43(1
.69)
10 (0.39)
8" Chuck
10" Chuck
6" Chuck
Z-axis Stroke 700 (27.56)
B/C-Type Sub Spindle Stroke 640 (25.2)
A-Type Sub Spindle Stroke 665 (26.18)9 (0.35)
50 1.97)35(1.38)
168 (6.61)
115
(4.5
3)35
(1.
38)
18 (0.7
1)X-a
xis
Stro
ke 2
40 (
9.45
)
8 (0
.31)
259 (10.2)
89(3.5)
22(0.87)
105(4.13)
18(0.71)
72(2
.83)
120
(4.7
2)
95(3
.74)
120
(4.7
2)
14 (
0.55
)
50(1
.97)
10 (0.39)9 (0.35)
Max 65 (2.56)
5(0.2)
14.5(0.57)
8" Chuck
10" Chuck
6" Chuck
Z-axis Stroke 700 (27.56)
B/C-Type Sub Spindle Stroke 640 (25.2)
A-Type Sub Spindle Stroke 665 (26.18)
61 (2.4)187.5 (7.38)264 (10.39)
50(1
.97)
60(2
.36)
30 (
1.18
)
22
(0.8
7)
X-a
xis
Stro
ke 2
40 (
9.45
)
70(2
.76)
20(0
.79)
210
(8.2
7)
60 (2.36)83 (3.27)
18(0
.71)
95(3
.74)
10 (0.39)
Moving Range * Unit : mm (inch)
Hi-TECH 230AL / BL / CL YSMC O.D
Hi-TECH 230A(L) / B(L) / C(L) YMC O.D Hi-TECH 230A(L) / B(L) / C(L) YMC I.D
Hi-TECH 230A(L) / B(L) / C(L) YMC Axial Hi-TECH 230A(L) / B(L) / C(L) YMC Radial
Hi-TECH 230AL / BL / CL YSMC Axial
Hi-TECH 230AL / BL / CL YSMC I.D
Hi-TECH 230AL / BL / CL YSMC Radial
X-a
xis
Stro
ke 2
40 (
9.45
)
Z-axis Stroke 700 (27.56)
B/C-Type : Max Cutting Length 560 (22.05)
B/C-Type : Sub Spindle Stroke 640 (25.2)
A-Type : Sub Spindle Stroke 665 (26.18)
A-Type : Max Cutting Length 584 (22.99)
8" Chuck
10" Chuck
6" Chuck
10 (0.39)
9 (0.35)
85 (3.35)168 (6.61)
142
(5.5
9)53
(2
.09)
32(1
.26)
259 (10.2)
5 (0
.2)
8 (0.3
1)
606 (23.86)
630 (24.8)
8" Chuck
10" Chuck
6" Chuck
41(1.61)
167 (6.57)259 (10.2)
65.5
(2.5
8)98
(3.8
6)
45(1.77)
Z-axis Stroke 700 (27.56)
B/C-Type : Sub Spindle Stroke 640 (25.2)
A-Type : Sub Spindle Stroke 665 (26.18)
10 (0.39)
9 (0.35)
X-a
xis
Stro
ke 2
40 (
9.45
)
5 (0
.2)
13 (
0.51
)32
(1.2
6)
32(1
.26)
666 (26.22)
690 (27.17)
8" Chuck
10" Chuck
6" Chuck
50(1.97)
35(1.38)
168 (6.61)
115
(4.5
3)35
(1.3
8)
13 (0.5
1)
259 (10.2)
X-a
xis
Stro
ke 2
40 (
9.45
)
Z-axis Stroke 700 (27.56)
B/C-Type : Sub Spindle Stroke 640 (25.2)
A-Type : Sub Spindle Stroke 665 (26.18)
10 (0.39)
9 (0.35)
32(1
.26)
45(1
.77)
567 (22.32)
591 (23.27)
8" Chuck
10" Chuck
6" Chuck
85 (3.35)168 (6.61)259 (10.2)
70 (
2.76
)12
5 (4
.92)
X-a
xis
Stro
ke 2
40 (
9.45
)
Z-axis Stroke 700 (27.56)
B/C-Type : Sub Spindle Stroke 640 (25.2)
A-Type : Sub Spindle Stroke 665 (26.18)
10 (0.39)
9 (0.35)
32(1
.26)
5 (0
.2)
8 (0
.31)
8" Chuck
10" Chuck
Z-axis Stroke 460 (18.11) [L : 700 (27.56)]
Tailstock Stroke 460 (18.11) [L : 700 (27.56)]
X-a
xis
Stro
ke 2
40 (
9.45
)
200
(7.8
7)
42(1.65) 14
.5(0
.57)
15.5
(0.6
1)
10 (
0.39
)
260 (10.24)
236 (9.29)
A-Type Max Cutting Length 344 (13.54) [L : 584 (22.99)]
B/C-Type Max Cutting Length 320 (12.6) [L : 560 (22.05)]
8" Chuck
10" Chuck
Z-axis Stroke 460 (18.11) [L : 700 (27.56)]
A-Type : 390 (15.35) [L : 630 (24.8)]
B/C-Type : 366 (14.41) [L : 606(23.86)]
X-a
xis
Stro
ke 2
40 (
9.45
)
Tailstock Stroke 460 (18.11) [L : 700 (27.56)]
13(0
.51)
69.5
(2.7
4)
42(1.65)
55(2
.17)
14.5
(0.5
7)
212.
5 (8
.37)
284 (11.18)308 (12.13)
8" Chuck
10" Chuck
Z-axis Stroke 460 (18.11) [L : 700 (27.56)]
A-Type : 450 (17.72) [L : 690 (27.17)]
B/C-Type : 426 (16.77) [L : 666 (26.22)]
Tailstock Stroke 460 (18.11) [L : 700 (27.56)]
X-a
xis
Stro
ke 2
40 (
9.45
)
208
(8.1
9)
13(0
.51)
27 (
1.06
)
8 (0
.31)
40(1.57)
344 (13.54)
368 (14.49)
8" Chuck
10" Chuck
Z-axis Stroke 460 (18.11) [L : 700 (27.56)]
A-Type : 351 (13.82) [L : 591 (23.27)]
B/C-Type : 327 (12.87) [L : 567 (22.32)]
Tailstock Stroke 460 (18.11) [L : 700 (27.56)]
53(2
.09)
30 (
1.18
)
30 (1.18)25 (0.98)
203
(7.9
9)
24 (
0.94
)
83 (
3.27
)13 (0
.51)245 (9.65)
269 (10.59)
X-a
xis
Stro
ke 2
40 (
9.45
)
19
Moving Range * Unit : mm (inch)
20 HWACHEON CATALOG : Hi-TECH 230
Detailed Information
Hi-TECH 230AL / BL / CL YSMC O.D (Sub)
Hi-TECH 230AL / BL / CL YSMC Axial (Sub)
Hi-TECH 230AL / BL / CL YSMC I.D (Sub)
Hi-TECH 230AL / BL / CL YSMC Radial (Sub) - Offset
8" Chuck
10" Chuck
6" Chuck
144 (5.67)101 (3.98)
55(2
.17)
22(0.87)
60(2.36)
195
(7.6
8)
68(2
.68)
25(0
.98)
87 (
3.43
)65
(2.
56)
65 (
2.56
)
63 (
2.48
)
41(1
.61)
87 (
3.43
)47
(1
.85)
76 (2.99)22(0.87)
60(2.36)
X-a
xis
Stro
ke 2
40 (
9.45
)
Z-axis Stroke 700 (27.56)
B/C-Type : Max Cutting Length 566 (22.28)
B/C-Type : Sub Spindle Stroke 640 (25.2)
A-Type : Sub Spindle Stroke 665 (26.18)
A-Type : Max Cutting Length 591 (23.27)
10 (0.39)
9 (0.35)
32(1
.26)
13 (0.5
1)
259 (10.2)5 (0.2)
5 (0.2)
8" Chuck
10" Chuck
6" Chuck
46(1.81)
168 (6.61)259 (10.2)
66 (
2.6)
92 (
3.62
)
12 (
0.47
)33
(1.3
)
39(1.54)
Max 85 (3.35)
48(1
.89)
152
(5.9
8)40
(1.
57)
99 (3.9)
71 (2.8)
60 (
2.36
)15
6 (6
.14)
24 (
0.94
)
5(0
.2)
Z-axis Stroke 700 (27.56)
B/C-Type : Sub Spindle Stroke 640 (25.2)
A-Type : Sub Spindle Stroke 665 (26.18)
10 (0.39)
9 (0.35)
8 (0.31)
X-a
xis
Stro
ke 2
40 (
9.45
)
12(0.47)
38 (1.5
)
8" Chuck
10" Chuck
6" Chuck
36(1.42)
167 (6.57)
89(3.5)
22(0.87)
105(4.13)
18(0.71)
72 (
2.83
)
95 (
3.74
)12
0 (4
.73)
120
(4.7
2)
X-a
xis
Stro
ke 2
40 (
9.45
)
Z-axis Stroke 700 (27.56)
B/C-Type : Sub Spindle Stroke 640 (25.2)
A-Type : Sub Spindle Stroke 665 (26.18)
10 (0.39)
9 (0.35)
32(1
.26)
259 (10.2) 50(1.97)
115
(4.5
3)35
(1.3
8)45
(1.7
7)13 (0
.51)
8" Chuck
10" Chuck
6" Chuck
Z-axis Stroke 700 (27.56)
B/C-Type Sub Spindle Stroke 640 (25.2)
A-Type Sub Spindle Stroke 665 (26.18)
10 (0.39)
9 (0.35)
115 (4.53)138 (5.43)259 (10.2)
47 (
1.85
)
15 (
0.59
)
210
(8.2
7)
32(1
.26)X
-axi
s St
roke
240
(9.
45)
148
(5.8
3)
13(0
.51)
77 (3.03)
105 (4.13)
Max 85 (3.35)
95(3
.74)
Hi-TECH 230AXL / BXL / CXL YMC O.D
Hi-TECH 230AXL / BXL / CXL YMC Axial
Hi-TECH 230AXL / BXL / CXL YMC I.D
Hi-TECH 230AXL / BXL / CXL YMC Radial
Quill Stroke : 120 (4.72)
8" Chuck
10" Chuck
Z-axis Stroke : 1,200 (47.24)
A-Type Max Cutting Length : 1,084 (42.68)
B/C-Type Max Cutting Length : 1,060 (41.73)
Tailstock Moving : 1,080 (42.52)
X-a
xis
Stro
ke :
240
(9.4
5)
42(1.65)
24 (0.9
4)6
(0.2
4)
10 (0.3
9)
760 (29.92)
736 (28.98)
200
(7.8
7)
282 (11.1)
Quill Stroke : 120 (4.72)
8" Chuck
10" Chuck
Z-axis Stroke : 1,200 (47.24)
A-Type : 1,130 (44.49)
B/C-Type : 1,106 (43.54)
X-a
xis
Stro
ke :
240
(9.4
5)
Tailstock Moving : 1,080 (42.52)
23(0
.91)
59.5
(2.3
4)
42 (1.65)
280 (11.02)
55(2
.17)
4.5
(0.1
8)
212.
5 (8
.37)
784 (30.87)808 (31.81)
157.
5 (6
.2) 62
.5 (2.
46)
Quill Stroke : 120 (4.72)
8" Chuck
10" Chuck
Z-axis Stroke : 1,200 (47.24)
A-Type : 1,190 (46.85)
B/C-Type : 1,166 (45.91)
Tailstock Moving : 1,080 (42.52)
X-a
xis
Stro
ke :
240
(9.4
5)
208
(8.1
9)
23(0
.91)
27 (1.
06)
18 (0.
71)
40(1.57)
844 (33.23)
868 (34.17) 282 (11.1)
Quill Stroke : 120 (4.72)
8" Chuck
10" Chuck
Z-axis Stroke : 1,200 (47.24)
A-Type : 1,091 (42.95)
B/C-Type : 1,067 (42.01)
X-a
xis
Stro
ke :
240
(9.4
5)
Tailstock Moving : 1,080 (42.52)
53(2
.09)
30 (1.1
8)
30(1.18)
25(0.98)
203
(7.9
9)
13 (0.
51)
83 (3.
27)
66 (2.
6)
120
(4.7
2)24
(0.9
4)
745 (29.33)
769 (30.28)
267 (10.51)
Machine Specifications
ItemHi-TECH 230A / AL / AXL Hi-TECH 230AL / AXL
STD MC YMC SMC YSMC
Capacity
Swing over Bed mm (inch) Ø690 (Ø27.17) Ø750 (Ø29.53) Ø690 (Ø27.17) Ø750 (Ø29.53)
Swing over Saddle mm (inch) Ø529 (Ø20.83) Ø540 (Ø21.26) Ø529 (Ø20.83) Ø540 (Ø21.26)
Max Cutting Dia mm (inch) Ø425 (Ø16.73) Ø400 (Ø15.75) Ø400 (Ø15.75)
Standard Cutting Dia mm (inch) Ø213.6 (Ø8.41) Ø221 (Ø8.7) Ø277 (Ø10.91)
Max Cutting Lengthmm (inch)
403 (15.87) / L:643 (25.31) / XL:1,143 (45)
344 (13.54) / L:584 (22.99) / XL:1,084 (42.68) L:584 (22.99) / XL: 1,084 (42.68)
Chuck Size inch 8 8 (Sub:6)
Spindle
Type of Spindle Nose ASA A2-6 A2-6 (Sub:A2-5)
Max Spindle Speed rpm 4,500 4,500 (Sub:5,000)
Through Spindle Hole Dia mm (inch) Ø76 (Ø2.99) Ø76 (2.99) [Sub:Ø62 (2.44)]
Max Bar Size mm (inch) Ø65 (Ø2.56) Ø65 (Ø2.56) [Sub:Ø51 (Ø2.01)]
Spindle Bearing Inner Dia mm (inch) Ø110 (Ø4.33) Ø110 (Ø4.33) [Sub:Ø90 (Ø3.54)]
Spindle MotorMain kW (HP) 18.5 / 15 (25 / 20) 18.5 / 15 (25 / 20)
Sub kW (HP) - 7.5 / 5.5 (10 / 7.4) [OPT : 11 / 7.5 (15 / 10)]
Turret
Number of Tool Stations ea 12 12 (24 Positions Index) 12 (24 Positions Index)
Tool Size mm (inch) O.D:□25 (□1), I.D:Ø40 (Ø1.5) O.D:□25 (□1), I.D:Ø40 (Ø1.5)
Turret Indexing Time sec/step 0.344 0.344
Axes
Rapid Traverse (X / Z / Y / B) m/min (ipm) 30 / 30 / 10 / - (1,181 / 1,181 / 394 / - ) 30 / 30 / 10 / 24 (1,181 / 1,181 / 394 / 945)
Max Stroke (X / Z / Y / B) mm (inch)240 / 460 / 120 / - (9.45 / 18.11 / 4.72 / - )
/ L:240 / 700 / 120 / - (9.45 / 27.56 / 4.72 / - )/ XL:240 / 1,200 / 120 / - (9.45 / 47.24 / 4.72 / - )
L:240 / 700 / 120 / 665 (9.45 / 27.56 / 4.72 / 26.18 )/ XL:240 / 1,200 / 120 / 1,165 (9.45 / 47.24 / 4.72 / 45.87 )
Feed Motor (X / Z / Y / B) kW (HP) 3.0 / 3.0 / 3.0 / - (4 / 4 / 4 / - ) 3.0 / 3.0 / 3.0 / 1.8 (4 / 4 / 4 / 2.4)
Tailstock
Max Stroke mm (inch) 460 (18.11) / L:700 (27.56) / XL:1,080 (42.52) -
Cylinder Diameter mm (inch) Ø65 (Ø2.56) / L:Ø65 (Ø2.56) / XL:Ø100 (Ø3.94) -
Quill Stroke mm (inch) XL:120 (4.72) -
Center Taper MT # 5 -
Turnmill
Spindle Motor kW (HP) - 5.5 / 3.7 (7.4 / 5) 5.5 / 3.7 (7.4 / 5)
Max Spindle Speed rpm - 5,000 5,000
Max Drill / Tap Size mm (inch) - Ø20 (Ø0.75) / M16 Ø20 (Ø0.75) / M16
Min Index Angle deg - 0.0001 0.0001 (Sub:0.0001)
Tank
Lubrication / Hydraulic ℓ (gal) 12 (3.17) / 11 (2.91)
Coolant ℓ (gal) 115 (30.38) / L:125 (33.02) / XL:150 (39.63)125 (33.02) / L:140 (36.98)
/ XL:165 (43.59)L:125 (33.02) / XL:150 (39.63) L:140 (36.98) / XL:165 (43.59)
Large Capacity Coolant (OPT) ℓ (gal) 200 (52.83) / L:210 (55.48) / XL:235 (62.08)210 (55.48) / L:225 (59.44)
/ XL:250 (66.04)L:210 (55.48) / XL:235 (62.08) L:225 (59.44) / XL:250 (66.04)
Power Sources
Electrical Power Supply kVA 35 40 40
Dimension
Height mm (inch) 1,800 (70.87) 2,104 (82.83) 1,934.5 (76.16) 2,104 (82.83)
Floor Space (L×W) mm (inch)2,893 x 1,849.5 (113.9 x 72.81)
/ L:3,133 x 1,849.5 (123.35 x 72.81)/ XL:3,753 x 1,849.5 (147.76 x 72.81)
2,893 x 1,924.5 (113.9 x 75.77)/L:3,133 x 1,924.5 (123.35 x 75.77)
/ XL:3,753 x 1,924.5 (147.76 x 75.77)
L:3,133 x 1,849.5 (123.35 x 72.81)/ XL:3,753 x 1,849.5 (147.76 x 72.81)
L:3,133 x 1,924.5 (123.35 x 75.77)/ XL:3,753 x 1,924.5 (147.76 x 75.77)
Weight kgf (lbf) 5,800 (12,787) / L:6,500 (14,330) / XL: 8,050 (17,747)5,950 (13,118) / L:6,650 (14,661)
/ XL:8,200 (18,078)L:6,650 (14,661) / XL:8,200 (18,078) L:6,800 (14,991) / XL:8,350 (18,409)
NC Controller Fanuc 0i-TF Plus
Product Configuration Each product can be configured to fit your application.
Hi-TECH 230
Chuck 8”
STD
MC
YMC
A-Type
Short Bed
A / STDA / MCA / YMC
AL / STDAL / MCAL / YMCAL / SMCAL / YSMC
AXL / STDAXL / MCAXL / YMCAXL / SMCAXL / YSMC
Ref
1) L:Long Type2) XL:Extra Long Type3) MC:Turnmill [C-axis (0.0001˚)]4) S:Sub Spindle5) Y:Y-axis
B / STDB / MCB / YMC
BL / STDBL / MCBL / YMCBL / SMCBL / YSMC
C / STDC / MCC / YMC
CL / STDCL / MCCL / YMCCL / SMCCL / YSMC
BXL / STDBXL / MCBXL / YMCBXL / SMCBXL / YSMC
CXL / STDCXL / MCCXL / YMCCXL / SMCCXL / YSMC
Chuck 10”
STD
YMC
YSMC
B-Type
Long Bed
MC
SMC
Chuck 10”
STD
YMC
YSMC
C-Type
Extra Long Bed
MC
SMC
21
22 HWACHEON CATALOG : Hi-TECH 230
Detailed Information
Product Configuration
ItemHi-TECH 230B/BL/BXL Hi-TECH 230BL/BXL Hi-TECH 230C/CL/CXL Hi-TECH 230CL/CXL
STD MC YMC SMC YSMC STD MC YMC SMC YSMC
Capacity
Swing over Bed mm (inch) Ø690 (Ø27.17) Ø750 (Ø29.53) Ø690 (Ø27.17) Ø750 (Ø29.53) Ø690 (Ø27.17) Ø750 (Ø29.53) Ø690 (Ø27.17) Ø750 (Ø29.53)
Swing over Saddle mm (inch) Ø529 (Ø20.83) Ø540 (Ø21.26) Ø529 (Ø20.83) Ø540 (Ø21.26) Ø529 (Ø20.83) Ø540 (Ø21.26) Ø529 (Ø20.83) Ø540 (Ø21.26)
Max Cutting Diamm (inch)
Ø425 (Ø16.73)
Ø400 (Ø15.75) Ø400 (Ø15.75)Ø425
(Ø16.73)Ø400 (Ø15.75) Ø400 (Ø15.75)
Standard Cutting Dia mm (inch)Ø213.6 (Ø8.41)
Ø221 (Ø8.7) Ø277 (Ø10.91)Ø255
(Ø10.04)Ø264 (Ø10.39) Ø277 (Ø10.91)
Max Cutting Length mm (inch)
379 (14.92)/ L:619 (24.37)
/ XL:1,119 (44.06)
320 (12.6)/ L:560 (22.05)
/ XL:1,060 (41.73)
L:560 (22.05)/ XL:1,060 (41.73)
379 (14.92)/ L:619(24.37)
/ XL:1,119 (44.06)
320 (12.6)/ L:560 (22.05)
/ XL:1,060 (41.73)
L:560 (22.05)/ XL:1,060 (41.73)
Chuck Size inch 10 10 (Sub:6) 10 10 (Sub:6)
Spindle
Type of Spindle Nose ASA A2-8 A2-8 (Sub:A2-5) A2-8 A2-8 (Sub:A2-5)
Max Spindle Speed rpm 3,500 3,500 (Sub:5,000) 3,500 3,500 (Sub:5,000)
Through Spindle Hole Dia mm (inch) Ø91 (Ø3.58) Ø91 (3.58) [Sub:Ø62 (2.44)] Ø91 (Ø3.58) Ø91 (3.58) [Sub:Ø62 (2.44)]
Max Bar Size mm (inch) Ø81 (Ø3.19) Ø81 (Ø3.19) [Sub:Ø51 (Ø2.01)] Ø81 (Ø3.19) Ø81 (Ø3.19) [Sub:Ø51 (Ø2.01)]
Spindle Bearing Inner Dia mm (inch) Ø140 (Ø5.51) Ø140 (Ø5.51) [Sub:Ø90 (Ø3.54)] Ø140 (Ø5.51) Ø140 (Ø5.51) [Sub:Ø90 (Ø3.54)]
Spindle MotorMain kW (HP) 18.5 / 15 (25 / 20) 18.5 / 15 (25 / 20) 22 / 18.5 (29 / 25) 22 / 18.5 (29 / 25)
Sub kW (HP) - 7.5 / 5.5 (10 / 7.4) [OPT : 11 / 7.5 (15 / 10)] - 7.5 / 5.5 (10 / 7.4)
[OPT : 11 / 7.5 (15 / 10)]
Turret
Number of Tool Stations ea 12 12 (24 Positions Index) 12 (24 Positions Index) 12 12 (24 Positions Index) 12 (24 Positions Index)
Tool Size mm (inch) O.D:□25 (□1), I.D:Ø40 (Ø1.5) O.D:□25 (□1), I.D:Ø40 (Ø1.5) O.D:□25 (□1), I.D:Ø40 (Ø1.5) O.D:□25 (□1), I.D:Ø40 (Ø1.5)
Turret Indexing Time sec/step 0.344 0.344 0.344 0.344
Axes
Rapid Speed (X / Z / Y / B)
m/min (ipm) 30 / 30 / 10 / - (1,181 / 1,181 / 394 / - )
30 / 30 / 10 / 24 (1,181 / 1,181 / 394 / 945)
30 / 30 / 10 / - (1,181 / 1,181 / 394 / - )
30 / 30 / 10 / 24 (1,181 / 1,181 / 394 / 945)
Max Stroke (X / Z / Y / B)
mm (inch)240 / 460 / 120 / - (9.45 / 18.11 / 4.72 / - )
/ L:240 / 700 / 120 / - (9.45 / 27.56 / 4.72 / - )/ XL:240 / 1,200 / 120 / - (9.45 / 47.24 / 4.72 / - )
L:240 / 700 / 120 / 665 (9.45 / 27.56 / 4.72 / 26.18 )/ XL:240 / 1,200 / 120 / 1,140(9.45 / 47.24 / 4.72 / 44.88)
240 / 460 / 120 / - (9.45 / 18.11 / 4.72 / - )/ L:240 / 700 / 120 / - (9.45 / 27.56 / 4.72 / - )
/ XL:240 / 1,200 / 120 / - (9.45 / 47.24 / 4.72 / - )
L:240 / 700 / 120 / 665 (9.45 / 27.56 / 4.72 / 26.18 )/ XL:240 / 1,200 / 120 / 1,140(9.45 / 47.24 / 4.72 / 44.88)
Feed Motor (X / Z / Y / B)
kW (HP) 3.0 / 3.0 / 3.0 / - (4 / 4 / 4 / -)
3.0 / 3.0 / 3.0 / 1.8 (4 / 4 / 4 / 2.4)
3.0 / 3.0 / 3.0 / - (4 / 4 / 4 / -)
3.0 / 3.0 / 3.0 / 1.8 (4 / 4 / 4 / 2.4)
Tailstock
Max Stroke mm (inch)460 (18.11)
/ L:700 (27.56) / XL:1,080 (42.52)
-460 (18.11)
/ L:700 (27.56) / XL:1,080 (42.52)
-
Cylinder Diametermm (inch)
Ø65 (Ø2.56) / L:Ø65 (Ø2.56)
/ XL:Ø100 (Ø3.94)-
Ø65 (Ø2.56) / L:Ø65 (Ø2.56)
/ XL:Ø100 (Ø3.94)-
Quill Stroke mm (inch) XL:120 (4.72) - XL:120 (4.72) -
Center Taper MT # 5 - # 5 -
Turnmill
Spindle Motor kW (HP) - 5.5 / 3.7 (7.4 / 5) 5.5 / 3.7 (7.4 / 5) - 5.5 / 3.7 (7.4 / 5) 5.5 / 3.7 (7.4 / 5)
Max Spindle Speed rpm - 5,000 5,000 - 5,000 5,000
Max Drill / Tap Size mm (inch) - Ø20 (Ø0.75) / M16 Ø20 (Ø0.75) / M16 - Ø20 (Ø0.75) / M16 Ø20 (Ø0.75) / M16
Min Index Angle deg - 0.0001 0.0001 (Sub:0.0001) - 0.0001 0.0001 (Sub:0.0001)
Tank
Lubrication ℓ (gal) 12 (3.17) 12 (3.17) 12 (3.17) 12 (3.17)
Hydraulic ℓ (gal) 11 (2.91) 11 (2.91) 11 (2.91) 11 (2.91)
Coolant ℓ (gal)115 (30.38)
/ L:125 (33.02) / XL:150 (39.63)
125 (33.02) / L:140 (36.98)
/ XL:165 (43.59)
L:125 (33.02) / XL:150 (39.63)
L:140 (36.98) / XL:165 (43.59)
115 (30.38) / L:125 (33.02)
/ XL:150 (39.63)
125 (33.02) / L:140 (36.98)
/ XL:165 (43.59)
L:125 (33.02) / XL:150 (39.63)
L:140 (36.98) / XL:165 (43.59)
Large Capacity Coolant (OPT)
ℓ (gal)200 (52.83)
/ L:210 (55.48) / XL:235 (62.08)
210 (55.48) / L:225 (59.44)
/ XL:250 (66.04)
L:210 (55.48) / XL:235 (62.08)
L:225 (59.44) / XL:250 (66.04)
200 (52.83) / L:210 (55.48) / XL:235 (62.08)
210 (55.48) / L:225 (59.44)
/ XL:250 (66.04)
L:210 (55.48) / XL:235 (62.08)
L:225 (59.44) / XL:250 (66.04)
Power Sources
Electrical Power Supply kVA 35 40 40 35 40 45 50
Dimension
Height mm (inch) 1,800 (70.87) 2,104 (82.83) 1,934.5 (76.16) 2,104 (82.83) 1,800 (70.87) 2,104 (82.83) 1,934.5 (76.16) 2,104 (82.83)
Floor Space (L×W) mm (inch)
2,893 x 1,849.5 (113.9 x 72.81)
/ L:3,133 x 1,849.5 (123.35 x 72.81)
/ XL:3,753 x 1,849.5 (147.76 x 72.81)
2,893 x 1,924.5 (113.9 x 75.77)
/L:3,133 x 1,924.5 (123.35 x 75.77)
/ XL:3,753x1,924.5 (147.76 x 75.77)
L:3,133 x 1,849.5 (123.35 x 72.81)
/ XL:3,753 x1,849.5 (147.76 x 72.81)
L:3,133 x 1,924.5 (123.35 x 75.77)
/ XL:3,753 x1,924.5 (147.76 x 75.77)
2,993 x 1,849.5(117.83 x 72.81)
/ L:3,233 x 1,849.5(127.28 x 72.81)
/ XL:3,853 x 1,849.5(151.69 x 72.81)
2,993 x 1,924.5(117.83 x 75.77)
/ L:3,233x1,924.5(127.28 x 75.77)
/ XL:3,853x1,924.5(151.69 x 75.77)
L:3,233x1,849.5(127.28 x 72.81)
/ XL:3,853x1,849.5(151.69 x 72.81)
L:3,233x1,924.5(127.28 x 75.77)
/ XL:3,853x1,924.5(151.69 x 75.77)
Weight kgf (lbf)5,800 (12,787)
/ L:6,500 (14,330) / XL: 8,050 (17,747)
5,950 (13,118) / L:6,650 (14,661)
/ XL:8,200 (18,078)
L:6,650 (14,661)
/ XL:8,200 (18,078)L:6,800 (14,991)
/ XL:8,350 18,409)
5,900 (13,007)
/ L:6,600 (14,551)
/ XL:8,150 (17,968)
6,050 (13,338)
/ L:6,750 (14,881)
/ XL:8,300 (18,298)
L:6,750 (14,881)
/ XL:8,300 (18,298)L:6,900 (15,212)
/ XL:8,450 (18,629)
NC Controller Fanuc 0i-TF Plus
23
NC Specifications [Fanuc 0i-TF Plus]※ ㅡ : Not available S : Standard O : Option
Item Specification STD MC SMC YMC YSMC
Controlled Axis
Controlled Axis (Cs Axis) 2 - Axes 2-Axes 3-Axes 5-Axes 4-Axes 6-Axes
Simultaneously Controlled Axes
2 - Axes 2-Axes 3-Axes 4-Axes 4-Axes 4-Axes
Least Input Increment0.001 mm, 0.0001 deg, 0.0001 inch
S S S S S
Least Input Increment 1 / 100.0001 mm, 0.00001 inch
O O O O O
Inch / Metric Conversion G20, G21 S S S S S
Store Stroke Check 1 S S S S S
Store Stroke Check 2, 3 S S S S S
Chamfering on / off S S S S S
Backlash Compensation S S S S S
Operation
Automatic & MDI Operation
S S S S S
Program Number Search S S S S S
Sequence Number Search S S S S S
Dry Run, Single Block S S S S S
Manual Handle Feed 1Unit S S S S S
Manual Handle Feed Rate x1, x10, x100 S S S S S
Interpolation Function
Positioning G00 S S S S S
Linear Interpolation G01 S S S S S
Circular Interpolation G02,G03 S S S S S
Dwell (Per Seconds) G04 S S S S S
Polar Coordinate Interpolation
G12.1 / G13.1 - S S S S
Cylindrical Interpolation G7.1 - S S S S
Threading G32 S S S S S
Multiple Threading S S S S S
Continuous Threading S S S S S
Threading Retract S S S S S
Variable Lead Threading G34 S S S S S
Ref Position Return 1st G28 S S S S S
Ref Position Return Check G27 S S S S S
2 / 3 / 4th Ref Position Return G30 S S S S S
Arbitrary Speed Threading O O O O O
Feed Function
Rapid Traverse OverrideF0, F25, F50, F100
S S S S S
Feed Per Minute (mm/min) G98 S S S S S
Feed Per Revolution (mm/rev) G99 S S S S S
Rapid Traverse Bell-shaped Acceleration / Deceleration S S S S S
Feedrate Override 0 ~ 150% S S S S S
Jog Feed Override 0 ~ 1,260 mm/min S S S S S
Program Input
Tape Code EIA / ISO S S S S S
Optional Block Skip 9 ea S S S S S
Program Number O4-digits(1–9999) S S S S S
Sequence Number N8 - Digits S S S S S
Decimal Point Programming S S S S S
Coordinate System Setting G50 S S S S S
Coordinate System Shift S S S S S
Workpiece Coordinate System (G52 ~ G59) S S S S S
Workpiece Coordinate System Preset (G92.1) S S S S S
Direct Drawing Dimension Programming S S S S S
Item Specification STD MC SMC YMC YSMC
Program Input
G Code System A S S S S S
Programmable Data Input G10 S S S S S
Sub Program Call 10 folds nested S S S S S
Custom Macro B S S S S S
Addition of Custom Macro-common Variables
#100 ~ #199, #500 ~ #999
S S S S S
Canned Cycles S S S S S
Multiple Repetitive Cycle S S S S S
Multiple Repetitive Cycle II S S S S S
Canned Cycles for Drilling S S S S S
Manual Guide i S S S S S
Spindle Speed Function
Constant Surface Speed Control G96 / G97 S S S S S
Spindle Override 0 ~ 150% S S S S S
Spindle Orientation S S S S S
Rigid Tapping S S S S S
Spindle Synchronous Control - - S - S
Tool Function / Compensation
Tool Function T4-digits S S S S S
Tool Offset Pairs 128 pairs S S S S S
Tool Nose Radius Compensation S S S S S
Tool Geometry / Wear Compensation
S S S S S
Tool Life Management S S S S S
Automatic Tool OffsetTool presetter option is required
S S S S S
Direct Input Tool Offset Value Measured B
S S S S S
Editing Operation
Part Program Storage Length 5,120 m (2MB) S S S S S
Number of Register Able Programs
Max.1000 ea S S S S S
Background Editing S S S S S
Extended Part Program Editing
S S S S S
Play Back S S S S S
Operation / Display
Clock Function S S S S S
Self-diagnosis Function S S S S S
Alarm History Display S S S S S
Help Function S S S S S
Run Hour and Parts Count Display
S S S S S
Graphic Function S S S S S
Multi-language DisplayKorean, English, German, French, Italian, Chinese, Spanish, Portuguese, Polish, Hungarian, Swedish, Russian
S S S S S
Data Input / Output
Ethernet Interface S S S S S
Memory Card Interface S S S S S
USB Card Interface S S S S S
Others
Display Unit 15” Non touch display S S S S S
Fanuc i-HMI 15” Touch type display O O O O O
Others
L-HTLD (Hwacheon Tool Load Detect System) S S S S S
L-CAL (Lathe Calculator Function) S S S S S
L-COUNT (Work / Tool Counter Management) S S S S S
HLVC (Hwacheon Lathe Vibration Control) S S S S S
M-VISION Pro O O O O O
Hwacheon Global Network
Hwacheon Headquarters Hwacheon Europe Hwacheon Asia Hwacheon America
HC-T153-R4.0-202011
The product design and specifications may change without prior notice.
Read the operation manual carefully and thoroughly before operating the product,
and always follow the safety instructions and warnings labels attached on the surfaces of the machines.
www.hwacheon.com
Please contact us for product inquiries.
HEAD OFFICE
HWACHEON MACHINE TOOL CO., LTD.
123-17, HANAMSANDAN 4BEON-RO, GWANGSAN-GU, GWANGJU, KOREA
TEL: +82-62-951-5111 FAX: +82-62-951-0086
SEOUL OFFICE
46, BANGBAE-RO, SEOCHO-GU, SEOUL, KOREA
TEL: +82-2-523-7766 FAX: +82-2-523-2867
USA
HWACHEON MACHINERY AMERICA, INC.
555 BOND STREET, LINCOLNSHIRE, ILLINOIS, 60069, USA
TEL: +1-847-573-0100 FAX: +1-847-573-9900
SINGAPORE
HWACHEON ASIA PACIFIC PTE. LTD.
21 BUKIT BATOK CRESCENT, #08-79 WCEGA TOWER,
658065, SINGAPORE
TEL: +65-6515-4357 FAX: +65-6515-4358
VIETNAM
HWACHEON MACHINE TOOL VIETNAM CO., LTD.
HCM: TOA NHA SCS, KHU CNC, Q.9, HCMC, VIET NAM
TEL: +84-28-2253-2613
HN: SO 11, D. HUU NGHI, VSIP BAC NINH, VIET NAM
TEL : +84-22-2390-8981
GERMANY
HWACHEON MACHINERY EUROPE GMBH
JOSEF-BAUMANN STR. 25, 44805, BOCHUM, GERMANY
TEL: +49-234-912-816-0 FAX: +49-234-912-816-60
INDIA
HWACHEON MACHINE TOOL INDIA PVT. LTD.
LUNKAD SKY VISTA, UNIT NO.202, 2ND FLOOR PLOT NO.84,
LOHEGAON, VIMAN NAGAR, PUNE 411014, INDIA
+91-96-73-986633
CHINA
HWACHEON MACHINE TOOL CHINA CO., LTD.
B03A LIANGUAN JUHE INTERNATIONAL HARDWARE CITY, NO.
143 ZHENANZHONG ROAD, JINXIA, CHANGAN TOWN,
DONGGUAN CITY, GUANDONG PROVINCE , CHINA #523852
TEL: +86-769-8932-0601 FAX: +86-769-8932-0602