HOW DO I RESOLVETHE ISSUE OFBROTHER PRINTERERROR CODE TS-07?

WHAT IS BROTHER PRINTERERROR CODE TS-07?

Brother printers are designed to be a sturdy piece of technology togive you a strong performance every time you use them. But thereare times when they face errors due to some internal or externalissues. At such occasions running to technician is not alwaysfeasible. Therefore we advise you to back yourself up with DIYtroubleshooting methods. This article is written just for thatpurpose. We will discuss Brother Printer Error Code TS-07 here.

CAUSES OF BROTHER PRINTERERROR CODE TS-07

Let us first understand the causes behind this error. By understanding the causes you can

handle the error complications in a much deeper level, and also it is good for maintaining your

device for future use too. So without wasting any time, let us look at the reasons:

This error occurs when your Brother printer is not able to detect any WLAN access point or

the router.

Causes:

Troubleshooting Brother Printer ErrorCode TS-07:

First of all make sure that your WLAN access point or the router must support the WPS or AOSS.You can check it either by looking for the icons displayed on the router or you can look throughthe documents that were provided with your router or the WLAN access point.Now you need to configure the wireless setting using WPS or AOSS.Now place your Brother printer within the range of your router or WLAN access point for anundisturbed internet connection.Please make sure there are no ‘signal emitting’ objects such as microwave or cell phones, aroundyour printer or the router as they may disturb the signals or your router or WLAN access point.

Let us fix Brother Printer Error Code TS-07:Troubleshooting Brother Printer Error is quite straightforward. Make sure you follow the below mentioned instructions in the order as they are given:

Solution:

Press ‘Menu’ on your printer.Choose network and then press OK.Look for the WLAN network with the help of the arrow key on your printer and thenselect it. And then click on ‘OK.’Look for WPS/AOSS option and then select it and click on ‘OK.’If you see the message- ‘WLAN Enable?’ choose ‘accept’ option. This will disable thewired network setting.If you see ‘Network I/F switched to Wireless’ message, then click on ‘OK’ option. Thiswill disable the wired network setting.In case you see ‘Enable WLAN?’ message, then select ‘OK’ option. This will disable thewired network setting.Hold the WPS or AOSS button on the WLAN access point or the router for a while. Theduration of holding the button may differ based on your WLAN access point or router.Press ‘OK.’ At this step your Brother printer will automatically select which mode yourWPN access point or router uses and it will configure accordingly.On your printer’s LCD screen you will see a WLAN report and the same will beautomatically printed.

THANK YOU