hydradig - holtjcb.co.uk · excavator buckets the hd bucket range has - heavy duty • heavy duty...
TRANSCRIPT
HydradigBuckets 1-4GroundRakes 5 Forks 5 RipperTooth 6 EarthDrill 7 HydraulicBreakers 8 SelectorGrab 9HandHeldTools 10 -13SteelwristforJCBAttachments 14-15Quickhitches 16
Hydradig
1
Part number no pins
Part number with pins
Width mm (in)
Rated Capacity (m3 or Tonnes)
Weight kg (lb)
980/89988 980/A0355 250 (10) 0.054 (0.071) 98 (216)
980/89989 980/A0356 300 (12) 0.07 (0.09) 105 (231)
980/89990 980/A0358 400 (16) 0.103 (0.135) 107 (236)
980/89991 980/A0359 450 (18) 0.12 (0.157) 114 (251)
980/89992 - 500 (20) 0.138 (0.181) 121 (267)
980/89993 980/A0360 600 (24) 0.174 (0.228) 136 (300)
980/89994 - 800 (31) 0.248 (0.324) 167 (368)
980/89995 980/A0361 900 (35) 0.286 (0.374) 179 (395)
980/89821 - 1092 (43) 0.354 (0.462) 205 (452)
Excavator Buckets - General Purpose
HYD
RADIG
| EXC
AVATO
R BUC
KET
S - GEN
ERAL PU
RPOSE &
HEAVY D
UT
Y
9999/5977 Version 2
• General purpose bucket for every day digging duties
• Rolled top box section increases structural integrity
• Bolt on JCB Supertooth
• Side plate reinforcement offers additional strength and rigidity
• The GP bucket range has been designed using Finite Element Analysis throughout the engineering process
Key
S275 370 - 530 MPa
S355 470 - 630 MPa
Material Grade and Thickness
Shell Side Plate Side Cutter Toeplate Wear Pads
S275 6mm
S275 5mm
S35512mm
S355 20mm
N/A
Excavator Buckets - Heavy Duty
• Heavy Duty bucket for arduous digging applications with additional steel reinforcement ribs on the shell
• Rolled top box section increases structural integrity
• Bolt on JCB Supertooth
• The HD bucket range has been designed using Finite Element Analysis throughout the engineering process
• Side plate reinforcement offers additional strength and rigidity
Part numberWidth mm (in)
Rated Capacity (m3 or Tonnes)
Weight kg (lb)
980/90005 250 (10) 0.054 (0.071) 108 (238)
980/90006 300 (12) 0.07 (0.09) 117 (258)
980/90007 400 (16) 0.103 (0.135) 119 (262)
980/90008 450 (18) 0.12 (0.157) 127 (280)
980/90009 500 (20) 0.138 (0.181) 136 (300)
980/90010 600 (24) 0.174 (0.228) 155 (342)
980/90011 800 (31) 0.248 (0.324) 194 (428)
980/90012 900 (35) 0.286 (0.374) 210 (463)
2
HYD
RADIG
| EXC
AVATO
R BUC
KET
S - HEAVY D
UT
Y & D
EEP PROFILE
Excavator Buckets - Deep Profile
Excavator Buckets - Heavy Duty (continued)
Material Grade and Thickness
Shell Side Plate Side Cutter Toeplate Wear Pads
S275 6mm
S275 5mm
S35512mm
S35520mm
S35510mm
• Deep profile design provides additional capacity for higher outputs in arduous digging applications
• Rolled top box section increases structural integrity
• Side plate reinforcement offers additional strength and rigidity
• The DP bucket range has been designed using Finite Element Analysis throughout the engineering process
• Bolt on JCB Supertooth
• General purpose/Heavy duty bucket profile compared to deep profile bucket
Part number Width mm (in) Rated Capacity (m3 or Tonnes) Weight kg (lb)
980/89980 300 (12) 0.09 (0.12) 110 (243)
980/89981 350 (14) 0.11 (0.14) 117 (258)
980/89982 400 (16) 0.13 (0.17) 124 (273)
980/89983 450 (18) 0.18 (0.24) 135 (298)
980/89984 600 (24) 0.24 (0.31) 156 (344)
980/89985 800 (31) 0.3 (0.39) 186 (410)
980/89986 900 (35) 0.39 (0.51) 207 (456)
980/89987 1100 (43) 0.47 (0.61) 229 (505)
Material Grade and Thickness
Shell Side Plate Side Cutter Toeplate Wear Pads
S355 6mm
S355 6mm
S35512.5mm
S355 20mm
N/A
NOTE- When selling against check steel grade specification as many attachment providers specify lower grade steel
Optional bucket pin kit 340/00582 is available on 250mm (10in) buckets Optional bucket pin kit 340/00584 is available on 305mm (12in) buckets
Optional bucket pin kit 980/A5083 is available on 405mm (16in) and above buckets Optional weld in bucket pin kit 993/36400
HYD
RADIG
| EXC
AVATO
R BUC
KET
S - GRA
DIN
G &
TILT
ING
GRA
DIN
G
• The perfect tool for bank forming and landscaping
• Central reinforcing rib for additional strengthExcavator Buckets
- Grading Buckets
9999/5977 Version 2
Part number Outer width mm (in) Capacity m³ (yd³) Weight kg (lb)
980/A2114 1524 (60) 0.26 (0.34) 172 (379)
980/A2113 1830 (72) 0.215 (0.28) 150 (331)
Part number Outer width mm (in) Capacity m³ (yd³) Weight kg (lb)
980/89975 1520 (60) 0.16 (0.21) 340 (750)
Excavator Buckets - Tilting Grading
(Requires compatible hydraulic service)
• The JCB Tilting grading bucket allows operation without the need to reposition the machine
• Rolled top section increases structural integrity
• Left and right hand tilting for forming banks or batters
• A central reinforcing plate gives added strength and rigidity
3
4
HYD
RADIG
| EXC
AVATO
R BUC
KET
S - DITC
HIN
G &
TAPERED
DITC
HIN
G
4
Excavator Buckets - Tapered Ditching
Excavator Buckets - Ditching Buckets
The tapered ditching excavator bucket is the ideal tool to help maintain ditches and drains.
• Double box section cross beam increases structural integrity and prolongs service life
• Enables simple formation of ditches and drains
• Replaceable wear parts increase durability and extend the working life
Part numberno pins
Outer width mm (in) º
Capacity m³ (yd³)
Weight kg (lb)
531/02700 1676 (66) - 381 (15) 30 0.06 (0.08) 185 (408)
537/16100 1067 (412) - 305 (12) 60 0.1 (0.13) 111 (245)
• A central reinforcing plate gives added strength and rigidity
• A rolled top section increases structural integrity
• Drainage holes on ditch maintenance buckets allow water to escape, giving a better fill factor
Part numberno pins
Part number with pins
Outer width mm (in)
Capacity m³ (yd³)
Weight (excluding pins)kg (lb)
980/86060 - 1830 (72) 0.26 (0.34) 172 (379)
980/86061 980/A0362 1524 (60) 0.215 (0.28) 150 (331)
HYD
RADIG
| GRO
UN
D RA
KES &
FORK
S
Part number ItemFork length mm
Fork thickness mm
Fork width mm
980/D1642 Fork frame and forks - - -400/C2718 Forks for above 1220 40 100
400/C2720 Frame for above - - -
Forks
• Max lift capacity 750kg close to the machine. 250kg at full reach. (Please refer to machine load chart in cab)
• Open carriage design gives good visibility
• Max lift height 4.8 metres
Forks can be easily and quickly removed for fitment of other attachments.
9999/5977 Version 2
Ground Rakes • Used for sorting rocks, twigs and debris in the preparation of top soil, these rakes are also useful for clearing roots, hedges, brambles and any other material in readiness for a clean, landscaped finish
• Made using heavy duty 15mm Hardox tines and Brinell HB500 toe plate for the ultimate in durability and prolonged life
Part numberOverall Width mm
Tine Spacing mm
Pin Centres mm
Pin Dia mm
980/B0198 1200 223 343 44.4
980/B0199 1500 195 343 44.4
5
6
HYD
RADIG
| RIPPER TO
OT
H
Ripper Tooth • Breaks up hard surfaces such as frozen or compacted earth, concrete or tarmac
• Replaceable tip for even longer service life
Part number Description
990/81700 Ripper Tooth
HYD
RADIG
| EART
H D
RILL
9999/5977 Version 2
Earth Drill - (Requires single acting
hydraulic service)
• For accurate and precise drilling of fence and post holes
• The heavy duty gearbox and compact, powerful drive head
• Complete with hanger bracket and connection hoses
Part numberMax. flight dia. mm
Torque Nm Weight kg
980/A3596 900 6000 139
Flight Options
Power Head
Part number Diameter mm Weight kg
Standard Flights (Short): 1000mm long, bolt-on teeth, for light to moderate ground conditions
980/A2020 160 15980/A2022 230 28980/A2024 300 38980/A2026 380 45
Standard Flights: 1200mm long, bolt-on teeth, for light to moderate ground conditions
980/A2019 160 19980/A2021 230 39980/A2023 300 52980/A2025 380 60980/A2027 460 80980/A2028 600 12980/A2029 760 14980/A2030 900 20
Heavy Duty Flights: 1200mm long, socketed teeth, for difficult ground conditions: compacted soils, heavy clay, asphalt, frozen ground and fracturable rock
980/A2031 230 45980/A2032 300 58980/A2034 380 63980/A2035 460 92980/A2037 600 124980/A2038 760 141980/A2039 900 195
Rock Duty Flight: 1200mm long, carbide bullet style teeth, for solid, fracturable rock, frozen ground and compacted soils
980/A2040 300 49980/A2042 460 91
Adjustable extension bar, up to 1000mm
980/A2043 - - 7
8
Hydraulic Breakers (Requires single acting hydraulic service)
JCB offers two ranges of hydraulic breakers providing solutions for different user segments and maximum versatility.
The JCB Contractor range is aimed at customers where ultimate performance is not necessarily the key purchase criteria but where the price or rental cost of the machine and attachment is key to the overall project cost. The Professional range has been purpose designed for work in specialist dedicated breaking applications such as batch processing and quarrying where the breaker will be put to intensive use.
HYD
RADIG
| HYD
RAU
LIC BREA
KERS
• The solid body design provides maximum strength with lower weight
• The durable design with a sealed for life accumulator helps reduce maintenance costs
• Built-in sound suppression
• Supplied ‘ready to go’ with hoses, hanger bracket and moil and chisel tools
• Class leading power to weight ratio and perfectly matched tool and piston diameter maximises the blow energy transfer
Part number
ModelWeight kg
Tool dia. mm
Carrier weight t
Impact energy J*
Oil flow min/max lpm
Operating pressure min/max bar
Blow rate min/max bpm
Sound power level dBa
Professional range
980/A3477 HM386QPRO 360 80 4.5-9.0 600 60-100 100-150 720-1380 121
980/A9976 HM496QPRO 441 95 6.5-13.0 855 65-110 100-150 540-1260 124
Contractor range
980/B0251 HM033T 403 75 4.5 - 8.0 1393 34 - 76 120 - 165 380 - 900 117
980/B0264 HM054T 545 90 6.0 - 10.0 2282 42 - 94 140 - 170 350 - 700 116
*The impact energy figures are based on a calculation and may not be an accurate indication
9
HYD
RADIG
| SELECT
OR G
RAB
Selector Grab (Requires double acting
hydraulic service)
• 360° unlimited rotation
• No end stops ensuring grab will always close, even as the toe plates wear
• Quickhitch compatible
• Clamping cylinder features a hose burst check valve for maximum safety
• Perforated shells offering greater material retention and improved visibility
• 500 Brinell hard wearing toe plates are reversible for extended life
• Large jaw opening for ease of handling awkward items
• Side mounted hoses with guarding to prolong hose life
Part number Volume L Volume m^3 Mass of Grab kg
SG140
980/A0600 140 0.14 425
9999/5977 Version 2
10
Hand Held Tools
• Light demolition and construction applications
• Ideal for trenching, tunnelling and lateral work
• Small lightweight hammer designed for light to medium-duty breaking
JCB has a comprehensive range of hydraulic tools which have all been designed for maximum productivity. Proven in the field they include breakers, pumps, an earth drill, a disc cutter, drills and an impact wrench. All manufactured to JCB’s usual exacting standards.
Demolition Pick (D Handle)
Demolition Pick (T Handle)
Part number ModelTool size mm (hex)
Weight kg
Blow rate bpm
Vibration level m/s²
929/30800 D handle 22 (latch retainer) 15 1500 6.0
929/12900 D handle 22 (screw retainer) 15 1500 6.0
929/30900 T handle 22 15 1500 7.5
• Easy to use hand-held breaker, which are more productive than pneumatic equivalents
Breaker - HM25
Part number ModelTool size mm (hex)
Weight kgBlow rate bpm
Vibration level m/s²
929/92400 HM25 32 25 1500 4.0
HYD
RADIG
| HA
ND
HELD
TO
OLS - D
EMO
LITIO
N PIC
KS &
BREAK
ER
HYD
RADIG
| HA
ND
HELD
TO
OLS - PIC
K &
BREAK
ER, DISC
CU
TT
ER, EART
H D
RILL & FLIG
HT
OPT
ION
S
Hand Held Tools
Part number
Cutter diameter mm
Speed max. rpm
Weight kg
Vibration level m/s²
5024 300 6000 10 3.67
Model (mm)22mm Tools Part number
25mm Tools Part number
32mm Tools Part number
Rammer pad. Requires stem PP/7314 PP/7314 995/32914
Rammer Stem PP/7320 PP/7313 995/32928
Clay Spade PP/1360 PP/7316 995/32927
Asphalt Cutter 76 PP/1359 PP/7312 995/32920
Asphalt Cutter 125 PP/7321 - 995/32921
Asphalt Cutter 115 - PP/7315 995/32922
Chisel PP/1358 PP/7311 995/32916
Moil PP/1357 PP/7310 995/32915
• Well balanced, quiet unit designed for use with most materials including metals, concrete and stone.
• Tooth belt drive and fully enclosed working parts
• Removable handle for right or left hand operation
• The disc is protected by a steel guard, adjustable to any of three positions
• Low maintenance, quiet hydraulic design
• Flow regulator prevents over-speeding
Pick and Breaker Tool Options
Disc Cutter
• Thanks to its hydraulic drive, this unit has more torque than most petrol engine units, making it strictly a two-man operation
• Reversible for easy retraction
• Low weight makes it portable and manoeuvrable
• Quiet in operation
• Automatic return-to-neutral controller for added safety
Earth Drill
Flight Options
Part numberMax. flight dia. mm
Max. hole depth mm
Torque Nm
Speed rpm
Weight kg
929/13400 305 1220 295 136 15
Part number Size (mm) diameter Length (mm)
929/13407 100 1200
929/13408 150 1200
929/13409 200 1200
929/13410 250 1200
929/13411 305 1200
929/13428 610 1200
9999/5977 Version 111
12
HYD
RADIG
| HA
ND
HELD
TO
OLS - H
YDRA
ULIC
DRILL, D
IAM
ON
D C
ORE D
RILL & IM
PAC
T D
RILL
Hand Held Tools• The lightweight, compact
design makes the drill a very manageable tool
• Reversible drive
• Heat insulated handle
Hydraulic Drill
Part number Speed rpmMax. Bit Diameter mm
Chuck System
Weight kg
5117 1000 steel:13, wood: 27 Key type 2.7
Diamond Core Drills
• Side handle for ease of use
• Rugged hydraulic motor allows prolonged use
• Water hose port for dust suppression and cooling
• Can be used under water for extra versatility
• Integral depth gauge and auxiliary handle are easily removed for improved access in tight areas
• Built-in slip clutch guards against over-torque
• Reversible for easy bit retraction
Impact Drill
Part number Speed rpm Bit diameter mm Weight kg
929/13300 2400 15-35 8
929/13200 600 40-125 8
Part numberSpeed rpm
Blow rate bpm
Max. Bit Diameter mm
Chuck System
Weight kg
5118 805 3515steel:13, wood: 27, concrete: 19
SDS PLUS 3.9
HYD
RADIG
| HA
ND
HELD
TO
OLS - T
RASH
PUM
PS & SU
BMERSIVE PU
MPS
9999/5977 Version 2
Trash Pumps
• Rugged, durable submersible trash pump used for pumping water with mud, leaves, twigs, sand, sewage and sludge in it
• Used to handle matter that would clog most other pumps
Part numberMaximum Discharge lpm
Maximum Head m
Discharge Port mm (in BSP)
Weight kg
Flow Range l
980/A4874 2160 10.5 100 (4) 32 0-20
980/A4869 2640 15 100 (4) 32 0-30
• Self-priming with high power-to-weight ratio
• Maintenance free
• Aluminium body for light weight and a corrosion free life
Submersible PumpSubmersible Pumps
Part numberMaximum Discharge lpm
Maximum Head m
Discharge Port mm (in BSP)
Weight kg
Flow Range l
929/03900 700 18 50 (2) 8 0-22
929/04500 820 18 50 (2) 8.5 0-32
Pump Hose Options
Part number Description
929/34317 5m screw on lay flat hose
980/90632 10m Cam-loc lay flat hose (650/10301 required)
650/10301 Screw on Cam-Loc male fitting
Hand Held Tools
13
14
HYD
RADIG
| STEELW
RIST FO
R JCB AT
TAC
HM
ENT
S
Steelwrist for JCB Attachments
• The Steelwrist can be fitted with or without a gripper cassette and four finger gripper to enhance flexibility however this will be factory fit only and no retro fit kits for the gripper will be available
• Steelwrist coupler allows continuous rotation of attachments to 45° for improved precision and greater productivity
• 2 coupler sizes available - S45 and S50
• Factory fit only delivered complete ready to get to work
• Integrated Quickhitch
• Dual acting tilt cylinders and verticle tilt cyinders allow digging in narrow trenches
• Grease lubrication for longer life
Part number Model Pick up style
980/D1800 Fitting Kit
980/D2000 X12 Direct S45
980/D1000 X12 Direct with Gripper S45
980/D4000 X12 Direct S50
980/D3000 X12 Direct with Gripper S50
HYD
RADIG
| STEELW
RIST FO
R JCB AT
TAC
HM
ENT
S BUC
KET
S
Steelwrist for JCB
Attachments
9999/5977 Version 2
• Low weight but extremely robust
• The rounded back of the bucket allows the material to release easier and fill without clogging during digging
• Chamfered corners, open angle, long flat bottom and conical design allows the buckets to cut through material with minimal digging resistance, which positively affects your fuel efficiency
Grading Bucket
Digging Bucket
• The bucket is characterised by a progressive radius which allows the cutting edge to penetrate the
material without interference from the bottom.
• The bucket is available with or without teeth.
• For digging with a minimal width, for example, for cables or other media requiring narrow gauge ditching
• The long profile allows deep trenching without the tiltrotator having to come below surface level
Cable Bucket
Part number
ModelVolumel
Widthmm
Weightkg
ToothSystem
Cutting Edge mm
980/D5012S45 Digging Bucket without teeth
350 700 240 - 25
980/D5014S45 Digging Bucket with teeth
350 700 240 CAT-J250x4 -
980/D5013S50 Digging Bucket without teeth
350 700 240 - 25
980/D5015S50 Digging Bucket with teeth
350 700 240 CAT-J250x4 -
Part number Model Volume lWidth mm
Weight kg
Cutting Edge mm
980/D5016 S45 Grading Bucket 400 1300 220 25
980/D5017 S50 Grading Bucket 400 1300 220 25
Part number Model Volume lWidth mm
Weight kg
Cutting Edge mm
980/D5010 S45 Cable Bucket 200 400 170 30
980/D5011 S50 Cable Bucket 200 400 170 30
15
16
The use of a quickhitch allows fast changeover of attachments, keeping the machine hard at work and saving downtime every shift.
JCB hitches are the only products on the market which are fully approved by JCB for use on JCB Hydradig. The range includes both manual and hydraulic hitches which exceed current and anticipated legislation.
• Increases safety and reduces operator effort when changing buckets and attachments
• Durable design, with hardened steel jaws that keep wear to a minimum
• Mechanically operated with spring loaded lock released by use of a tommy bar
• High visibility safety lock pin prevents accidental loss of bucket or attachment
Manual
• Allows speedier and easier interchange of attachments
• Two independent locking mechanisms ensure the attachment is held safely in all scenarios
• CE marked for JCB Hydradig meeting all current and future legislation
• Fully controlled from within the cab with boom position sensors to ensure operation within a safe zone
• Full integration with the JCB Hydradig
Hydraulic
Part number Operation Weight kg (lb) Pin Size mm (in)
980/88833 Manual 95 (209) 44.45 (1.75)
980/A4955 Hydraulic* 72 (159) 44.45 (1.75)
*Requires compatible hydraulic service.
HYD
RADIG
| QU
ICK
HITC
HES
Quickhitches