iec 61850 specification for a teleprotection ied
TRANSCRIPT
-
7/25/2019 IEC 61850 Specification for a Teleprotection IED
1/8
SPECIFICATION FOR AN IEC 61850-COMPATIBLE TELEPROTECTION
SYSTEM
1.- ABSTRACT COMMUNICATION SERVICE INTERFACE (ACSI) SERVICES
The teleprotection system shall provide the following ACSI services with the specifiedprofiles (see IEC 61850-7-2 ver. 1.0) and a PICS file specifying the degree ofconformance statement;
1.1.- GOOSE messages
Application Association Model: Multicast
Application profile (A-profile): According to IEC 61850-8-1 Annex AServer
Transport profile (T-profile): IEEE 8802-3 frames with priority tagging and VLANidentifier (IEEE 802.1Q)Server and publisher
Physical medium: 100Base-Fx with MT-RJ connector
Performance class (according
to IEC 61850-5 section 13.7):
Type 1A, class P2/P3 (3 msec)
1.2.- Time synchronization
Application Association Model: Two-party or Multicast
Application profile (A-profile): Simple Network Time Protocol, modes 3 & 4implementedSubscriber
Transport profile (T-profile): ICMP over UDP/IP, ARPSubscriber
Physical medium: 100Base-Fx with MT-RJ connector
Performance class (accordingto IEC 61850-5 section 13.7):
Type 6, class T1 (1 msec)
1.3.- Buffered Control Block Report / Unbuffered Control Block Report
The teleprotection system shall provide at least one of the two types of control blockreport, with the following profile;
-
7/25/2019 IEC 61850 Specification for a Teleprotection IED
2/8
Application Association Model: Two-party (client/server)
Application profile (A-profile): MMS (Manufacturing Message Specification)ACSE (Association Control Service Element)Publisher
Transport profile (T-profile): ISO Transport over TCP (RFC 1006)TCP/IP with TCP_KEEPALIVE implemented and aTransport Selector of 4 bytesICMP, ARPPublisher
Physical medium: 100Base-Fx with MT-RJ connector
Performance class (accordingto IEC 61850-5 section 13.7):
Type 3 (500 msec)
Services implemented (ifBCBR):
Report (data-change, qchg-change, data-update)GetBCBRValuesSetBCBRValues
Services implemented (ifUCBR):
Report (data-change, qchg-change, data-update)GetUCBRValuesSetUCBRValues
1.4.- File Transfer
Application Association Model: Two-party (client/server)
Application profile (A-profile): MMS (Manufacturing Message Specification)ACSE (Association Control Service Element)Subscriber/Publisher
Transport profile (T-profile): ISO Transport over TCP (RFC 1006)TCP/IP with TCP_KEEPALIVE implemented and aTransport Selector of 4 bytes
ICMP, ARPSubscriber/Publisher
Physical medium: 100Base-Fx with MT-RJ connector
Performance class (accordingto IEC 61850-5 section 13.7):
Type 5 (no specific time requirement but accesscontrol is mandatory)
Services implemented: GetFileSetFileDeleteFileGetFileAttributeValues
-
7/25/2019 IEC 61850 Specification for a Teleprotection IED
3/8
1.5.- Log
Application Association Model: Two-party (client/server)
Application profile (A-profile): MMS (Manufacturing Message Specification)ACSE (Association Control Service Element)Publisher
Transport profile (T-profile): ISO Transport over TCP (RFC 1006)TCP/IP with TCP_KEEPALIVE implemented and aTransport Selector of 4 bytesICMP, ARPPublisher
Physical medium: 100Base-Fx with MT-RJ connector
Performance class (accordingto IEC 61850-5 section 13.7):
Type 5 (no specific time requirement but accesscontrol is mandatory)
Services implemented: GetLCBValuesSetLCBValuesGetLogStatusValuesQueryLogByTimeQueryLogAfter
1.6.- Logical Device
Application Association Model: Two-party (client/server)
Application profile (A-profile): MMS (Manufacturing Message Specification)ACSE (Association Control Service Element)Publisher
Transport profile (T-profile): ISO Transport over TCP (RFC 1006)TCP/IP with TCP_KEEPALIVE implemented and aTransport Selector of 4 bytesICMP, ARP
Publisher
Physical medium: 100Base-Fx with MT-RJ connector
Performance class (accordingto IEC 61850-5 section 13.7):
Type 5 (no specific time requirement but accesscontrol is mandatory)
Services implemented: LogicalDeviceDirectory
1.7.- Logical Node
Application Association Model: Two-party (client/server)
-
7/25/2019 IEC 61850 Specification for a Teleprotection IED
4/8
Application profile (A-profile): MMS (Manufacturing Message Specification)
ACSE (Association Control Service Element)Publisher
Transport profile (T-profile): ISO Transport over TCP (RFC 1006)TCP/IP with TCP_KEEPALIVE implemented and aTransport Selector of 4 bytesICMP, ARPPublisher
Physical medium: 100Base-Fx with MT-RJ connector
Performance class (accordingto IEC 61850-5 section 13.7):
Type 5 (no specific time requirement but accesscontrol is mandatory)
Services implemented: LogicalNodeDirectory
GetAllDataValues
1.8.- Server
Application Association Model: Two-party (client/server)
Application profile (A-profile): MMS (Manufacturing Message Specification)ACSE (Association Control Service Element)Publisher
Transport profile (T-profile): ISO Transport over TCP (RFC 1006)TCP/IP with TCP_KEEPALIVE implemented and aTransport Selector of 4 bytesICMP, ARPPublisher
Physical medium: 100Base-Fx with MT-RJ connector
Performance class (accordingto IEC 61850-5 section 13.7):
Type 5 (no specific time requirement but accesscontrol is mandatory)
Services implemented: ServerDirectory
1.9.- Application Association
Application Association Model: Two-party (client/server)
Application profile (A-profile): MMS (Manufacturing Message Specification)ACSE (Association Control Service Element)Publisher
Transport profile (T-profile): ISO Transport over TCP (RFC 1006)TCP/IP with TCP_KEEPALIVE implemented and aTransport Selector of 4 bytes
-
7/25/2019 IEC 61850 Specification for a Teleprotection IED
5/8
ICMP, ARPPublisher
Physical medium: 100Base-Fx with MT-RJ connector
Performance class (accordingto IEC 61850-5 section 13.7):
Type 5 (no specific time requirement but accesscontrol is mandatory)
Services implemented: AssociateAbortRelease
1.10.- Data
Application Association Model: Two-party (client/server)
Application profile (A-profile): MMS (Manufacturing Message Specification)ACSE (Association Control Service Element)Publisher
Transport profile (T-profile): ISO Transport over TCP (RFC 1006)TCP/IP with TCP_KEEPALIVE implemented and aTransport Selector of 4 bytesICMP, ARPPublisher
Physical medium: 100Base-Fx with MT-RJ connector
Performance class (accordingto IEC 61850-5 section 13.7):
Type 5 (no specific time requirement but accesscontrol is mandatory)
Services implemented: GetDataValuesSetDataValuesGetDataDirectoryGetDataDefinition
1.11.- Data Set
Application Association Model: Two-party (client/server)
Application profile (A-profile): MMS (Manufacturing Message Specification)ACSE (Association Control Service Element)Publisher
Transport profile (T-profile): ISO Transport over TCP (RFC 1006)TCP/IP with TCP_KEEPALIVE implemented and aTransport Selector of 4 bytesICMP, ARPPublisher
Physical medium: 100Base-Fx with MT-RJ connector
-
7/25/2019 IEC 61850 Specification for a Teleprotection IED
6/8
Performance class (accordingto IEC 61850-5 section 13.7):
Type 5 (no specific time requirement but accesscontrol is mandatory)
Services implemented: GetDataSetValuesGetDataSetDirectory
2.- LOGICAL NODES
The following logical nodes shall be implemented:
2.1.- LPHD: Physical Device Information
2.2.- LLN0: Device Status
-
7/25/2019 IEC 61850 Specification for a Teleprotection IED
7/8
2.3.- GGIO: Generic Process Input/Output
2.4.- PSCH: Protection Scheme
-
7/25/2019 IEC 61850 Specification for a Teleprotection IED
8/8
In this Logical Node the variables LosOfGrd (Loss of Guard), GrdRx (Guardreceived), SchTyp (Scheme Type) and OpDlTmms (Operate Delay Time) shall bemandatory.
3.- DOCUMENTS AND FILES
The manufacturer of the Teleprotection IED shall provide at least the followingdocuments (according to IEC 61850-10);
- ICD (IED Capability Description)- PICS (Protocol Implementation Conformance Statement)- PIXIT (Protocol Implementation Information for Testing)- TICS (Technical Issue Conformance Statement)
4.- ELECTROMAGNETIC COMPATIBILITY
The Teleprotection device shall comply with the following standards: ANSI C37.90.1and ANSI C37.90.2.