industrial hvac/r products

Industrial HVAC/R Productsfor

Explosion Proof and Severe Service

nn AIR CONDITIONERS

nn PRESSURIZATION SYSTEMS and BLOWERS

nn KoolKart® MOBILE AIR CONDITIONERS

nn HEATERS, HUMIDISTATS and THERMOSTATS

nn ELECTRONIC CABINET AIR CONDITIONERS

nn SPLIT SYSTEMS and UNIT COOLERS

Explosion Proof Window and Thru-the-Wall Air ConditionersSafetyCool for Class I, Groups B, C and D, Division 2 ........................................................... 3HazardCool for Class I, Groups C, D and Class II, Groups F and G, Divisions 1 and 2 ........ 3

Vertical Air ConditionersVA-40 Series Industrial Grade, Standard or Explosion Proof ............................................... 4VACX Economy Series, Cooling Only or Heat Pump, Standard or Explosion Proof ............ 4

PACX Series Packaged Air Conditioners, 2 to 50 tons, Explosion Proof ................................ 5

AH(X) Air Handlers, 1 to 20 tons, Standard or Explosion Proof ..................................................... 5(See Page 9 for Matching Condensing Units)

Pressurization Units for Automatic Building PressurizationPB(X) 10 Series, for Air Flow to 2,600 CFM ........................................................................... 6PB(X) 15 Series, for Air Flow to 6,250 CFM, with Optional Deep Bed Filter Module ............. 6

Combined Pressurization / Air Conditioning / Air Filtration SystemsPB(X) 24 Series, 3 to 12.5 ton Air Conditioners with Automatic Building Pressurization ....... 7PB(X) 20 Series, 2 to 50 ton A/C, Pressurization and Optional Deep Bed Filter Module ....... 7

KoolKart® Industrial Grade Mobile Air ConditionersKK Series, 2 to 15 tons, Cart or Skid Mounted ....................................................................... 8KKM Magnum Hi-Capacity Series, 20 to 60 ton A/C, Trailer or Skid Mounted .................... 8

UCX Series Unit Coolers, Explosion Proof, for Refrigerators and Freezers ................................ 9(Also see Page 9 for Matching Condensing Units)

CUX Series Condensing Units, Explosion Proof, for Refrigeration, Air Conditioningand Severe Service Applications ............................................................................................. 9

Electric Heaters, Thermostats and HumidistatsEHXP Series, Explosion Proof, Convection, Duct and Forced Air Types ............................. 10HKX Series, Explosion Proof Heater Carts, .......................................................................... 10

Special Purpose Explosion Proof Air ConditionersCAXP Series, Explosion Proof, Control Panel Air Conditioners, 2000 to 19,000 BTUH ...... 11RAXP Series, Explosion Proof Cabin Roof Air Conditioners, 13,500 BTUH ........................ 11

Air Filtration SystemsCorrosion, Odor, Dust and Toxic Gas Control ...............................................................12

"Turn-Key" InstallationsDesign-Build, Installation and Start-Up Services ............................................................12

Item Page

Table of Contents

SafetyCool Air Conditioners offer the user awide range of models for use in hazardouslocations classified Class I, Groups B, C and D,Division 2. Cooling models are CSA (CanadianStandards Association) certified to meet bothU. S. and Canadian Safety Standards.SafetyCool air conditioners are reliable, eco-nomical units for window or thru-wall installa-tions on offshore production platforms, in ana-lyzer shelters, industrial control rooms and inhazardous materials storage buildings. Modelswith both heating and cooling feature full elec-tric heat. This design assures full heat outputeven at minimum outside temperatures andavoids the limitations of modified commercialheat pumps. All models are covered by a threeyear limited warranty.Request Product Specification Sheet EXWI

FEATURESFEATURES

n For Hazardous Locations Classified per NECClass I, Groups B, C or D, Division 2

n CSA Certified to U. S. and Canadian standardsn Cooling Capacities from 8,200 to 33,000 BTUHn Heat / Cool Models with all electric heat from

7,600 to 27,100 BTUHn Front Panel Controls for Temperature and

Discharge Air Controln Remote Thermostats *n Full Corrosion Protection Package *n Also Available in 50 Hertz Modelsn Three-Year Limited Warranty

* = Optional* = Optional

FEATURESFEATURES

n For Hazardous Locations Classified per NECClass I, Groups C and D and Class II,Groups E, F and G, Divisions 1 and 2

n CSA Certified to U. S. and Canadian standardsn Cooling Capacities From 8,200 to 33,000 BTUHn Built-in Thermostat Adjustable from Front Paneln Type 316 Stainless Steel Housing *n Slide-Out Case for Easy Accessn Full Corrosion Protection Package *n Available with Accessory Electric Heatersn Also Available in 50 Hertz Modelsn Three-Year Limited Warranty

HazardCool.......Explosion ProofAir Conditioners for Division 1

SafetyCool.......Explosion ProofAir Conditioners for Division 2

HazardCool Industrial Air Conditioners offera full line of models for use under NEC ClassesI and II, Groups C, D, F and G, Divisions 1 and2. All units are CSA (Canadian StandardsAssociation) certified to both U. S. and the morestringent Canadian standards. Optional epoxyfinish, SaveCoil 101 coil coatings and type 316stainless housings assure unmatched corrosionprotection. Only industrial quality, U.L. andCSA recognized components are used. All wiringis enclosed in rigid conduit. A slide-out chassisfacilitates service and maintenance. The built-in thermostat and air flow deflectors areadjustable from the front panel.Request Product Specification Sheet EXWI

VACX Economy Series Outside Wall-MountedAir Conditioners and Heat Pumps are aneconomical solution for commercial and light dutyuse. Units have 20 ga galvanized steel cabinetsfinished with an attractive beige enamel. All modelshave a mounting flange as an integral part of thehousing for easy installation on an outside buildingwall. Models are also available electrically modifiedfor use in areas classified as hazardous underNEC Class I, Groups B, C and D, Division 2.

FEATURESFEATURES

n Low Initial Costn Compact Design with Minimum Footprintn Cooling Capacities from 18,000 to 60,000 BTUHn Models for Cooling Only or Heat Pumpsn Modified for Hazardous Locations per NEC

Class I, Groups B, C and D, Division 2 *n Ample Static Pressures for Air Duct Distributionn Corrosion Resistant SaveCoil 101 Coil Coating *n Self-Contained, Pretested, Easy to Installn Single and Three-phase Models for 50 and 60 Hz

VA 40 Industrial GradeVertical Air Conditioners

VA 40 Series: Vertical Air Conditioners aredesigned and built for reliability, minimalmaintenance and longevity in industrial andoffshore service. Models available for interior oroutside installation. Features include 14 ga steelcabinets, coils with extra wide fin spacings andcomponents specially selected for severe service.Motors are TEFC with 1.15 service factor. Blowersare belt driven with adjustable speed pulleys andpermanently lubricated bearings. Explosion proofmodels have spark proof construction and arecertified for hazardous locations under NationalElectric Code (NEC) Class I, Groups B, C and D orClass II, Groups F and G for Divisions 1 and 2. Anoptional corrosion protection package includes astainless steel housing, baked SaveCoil 101 coilcoating and full epoxy protection of all remainingmetal surfaces. Other options include water cooledor remote condensers, fused disconnect switch,gas and smoke detectors and fire dampers.

FEATURESFEATURES

n Built for Severe Industrial and Marine Servicen Models for Hazardous Locations per NEC Class I,

Groups B, C, and D and Class II, Groups E,F and G, Divisions 1 and 2 *

n Available as Combination Air Conditioner /Pressurization Systems (see PB 24 on p. 7)

n Cooling Capacities from 2 to 12.5 tonsn Air or Water Cooled or Remote * Condensern Steam or Electric Heat *n Full Corrosion Protection Package inc. Stainless

Cabinet and SaveCoil 101 Coil Coating *n Self-Contained, Pretested, Easy to Installn Models for 50 Hertz and for

High Ambient Temperaturesn Three Year Warranty

Request Product Bulletin VA401PSS

VACX Economy SeriesVertical Air Conditioners

* = Optional * = Optional

Request Product Bulletin VAEC1PSS

FEATURESFEATURES

n For NEC Class I, Groups B, C and D, andClass II, Groups E, F and G, Division 1 or 2

n Safety Engineered for Hazardous Locationsn Capacity Ratings from 2 to 50 Tonsn Blowers Spark Resistant per AMCA Standardn Models for Horizontal or Downflow Air Dischargen Full Corrosion Protection with Epoxy Finish and

SaveCoil Coating Finish *n Self-Contained, Pretested, Easy to Installn Combined Air Conditioning / Pressurizing

Systems available in PB 20 Series (Page 7)n Electric Heaters and Disconnect Switch *n Also Available in 50 Hertz Models

PACX with Side Access Filter Housing *

AHX Series...Explosion ProofAir Handlers for Split Systems

PACX Series...Explosion ProofPackaged Air Conditioners

FEATURESFEATURES

n For NEC Class I, Groups B, C or D in Div. 1 or 2n Vertical and Horizontal Configurationsn DX or Chilled Water, capacities from 1 to 20 tonsn Steam or Explosion proof Electric Heatn Fully Insulated with Fiberglass to R=3.26n Copper Coils with Aluminum or Copper * Finsn Expansion and Explosion proof Solenoid Valves *n Built-In Return Air Filtersn Sparkproof Blowers per AMCA Standardsn Heavy Duty Housing with Baked Enamel Finishn SaveCoil 101 Corrosion Resistant Coil Coatings,

Stainless Housings and Drain Pans *n Explosion Proof Thermostats and Humidistats *n Capacity Matched Condensing Units (Page 9)n Models for 50 or 60 Hertz Service

PACX Series Packaged Air Conditioners are thefirst choice for use in areas classified as hazardous.They are widely used for air conditioning crewquarters and control centers on oil productionplatforms. Other applications are in refineries,chemical and pharmaceutical plants, manufacturingfacilities, and for hazardous material storagebuildings.When both air conditioning and pressurization arerequired per NFPA 496 or other industrial codes,the PBX 20 Combined Air Conditioning andPressurizing System is recommended (See page7).

Request Product Specifications PASE1PSS

AHX Series Air Handlers in a wide range ofcooling capacities are offered for use in split airconditioning systems. Each model is engineeredand built to conform with NEC (National ElectricalCode) requirements for hazardous areas designat-ed Class I, Groups B, C or D in Divisions 1 and 2.Corrosion resistant, insulated double wall, andhigh pressure units are available for special appli-cations, as are models with gas phase and partic-ulate filters.

Request Form SPAI1FRM


FEATURESFEATURES

n Provides Positive Pressures for Rooms and SmallBuildings in Hazardous Locations

n CSA certified for Class I, Groups B**, C and Dand Class II, Groups F and G, Division 1and 2

n Automatic Pressure Control with Built-InPressure Readout and Alarm Contacts

n Eliminates Problems with High Maintenance ofCompetitive Damper Controlled Units

n Slide-Out Chassis for Convenient Accessn Speed Modulated Blower Maintains Any

Preset Pressure from 0.025 to 0.20" w.c.n Minimizes Heating and Cooling Lossesn Meets NFPA 496 and Similar Industrial Codesn Single or Redundant* Blowers with

Air Flows to 2600 CFMn Air Filter Easily Serviced from Front Paneln Available in 50 or 60 Hz and all Standard Voltages

FEATURESFEATURES

n Automatic Building Pressure Control, Air Filtration*and Heating* in one Pre-Assembled Module

n Pressure Adjustable from 0.025" to 0.50" w.c.n Explosion Proof* per Class I, Group B, C or D and

Class II, Group E, F or G, Division 1 or 2n Excellent Dust, Odor and Corrosion Control with

Choice of Particulate and Gas Phase* Filtersn Control Panel for Control and Status of Blower,

Building Pressure and Filter Conditionsn Low Noise Blowers from 1300 to 6250 CFM at

Static Pressures to 5" w.c.n For Indoor or Outdoor Installationn Standard with Pressure Loss Signal Contacts and

Adjustable Alarm Delayn Redundant Systems with Automatic Switch-over*n Smoke, Hydrocarbon or Specific Gas Detectors*

with Alarm and Automatic Shutdownsn Available in 50 or 60 Hz and all Standard Voltages

PB 15 Pressure Blowerswith Gas Phase Filtration

PB 10 Through-the-WallRoom Pressurizing Blowers

* = Optional** = Division 2 only

PB 10 Series Controlled Pressure Blowers are theeconomical solution for maintaining positive roompressures. Pre-assembled and pretested, theyoffer ready compliance with NFPA 496, API andother industrial codes that require buildings insidehazardous locations to be operated under speci-fied conditions of air pressure and air flow. Explo-sion proof models comply with the National Elec-tric Code (NEC) under Class I, Groups B, C and Dor Class II, Groups E, F and G, Div. 1 or 2. All unitsare fully instrumented with pressure set controls,pressure display, and blower start/stop controls.Operation is fully automatic; troublesome pres-sure control dampers are not required. A corrosionprotection package and dual blowers with auto-matic switch-over controls are optional.

PB 15 Series Controlled Pressure Blowers withoptional Side Access Filter Housings providepressurization and air filtration for buildings inhazardous (explosion proof), dusty or corrosivelocations. Each unit includes a pressure modu-lated blower and all required controls. An optional,applications engineered filter housing accepts awide range of particulate, carbon, multi-mixture,and most competitive filter modules. All modelsare computer selected, fully instrumented andfactory tested. The results: Clean, precisely pres-sure controlled air and safe, economic compliancewith ISA, NFPA, API and related industrial codes.Units can be installed in- or outdoors, on rooftopsor at ground level. Audible pressure loss alarm,specific gas sensors, and filter status indicatorsare optional.

Request Product Bulletin PRBL1 Request Product Bulletin PB151

FEATURESFEATURES

n Cooling, Heating, Pressurization and AirFiltration in a One, Preassembled Module

n Cooling Capacities from 2 to 50 tonsn Speed Modulated Blower Maintains Any Preset

Pressure from 0.025 to 0.50" w.c.n Explosion Proof Class I, Groups B, C or D and

Class II, Groups E, F and G, Div. 1 or 2n Skid Mounted, Pretested System for

Timesaving Installation and Start-Upn Control Panel with Pressure Readout,

Pressure Loss Alarm, and Purge Controlsn Filters for Dust, Odor* and Corrosion * Controln Smoke, Hydrocarbon or Specific Gas Detectors

with Alarm and Automatic Shutdown *n Corrosion Resistant Coatings and Coil Finish *

Industrial buildings in hazardous or dusty locationsrequire pressurization to meet the requirements ofNFPA 496, API, NEC, and other industrialcodes.The PB 24 Series provides both airconditioning and pressurization with all necessarycontrols in one compact, pre-assembled andpretested module.

These units are built for ruggedness, performanceand reliability. Extra strength cabinetry, corrosionprotective coating systems and industrial gradecomponents provide unsurpassed quality,performance and reliability. A control panel withpressure selection and readout, thermostat, alarmcontacts, blower switch and status lights is included.

Options include dual pressure blowers withautomatic backup, gas and smoke detectors,heaters, stainless steel cabinets, SaveCoil 101coil coatings and water-cooled condensers.Request Product Specification Sheet PB24

FEATURESFEATURES

n Building Pressurization, Air Conditioning, andHeating in one Pretested Module

n Explosion Proof models for Class I, Groups B, Cand D and Class II, Groups E, F and G inDivision 1 or 2.

n Comply with NFPA 496 and API Codesn For Severe Industrial or Marine Servicen Control Panel with Pressure Readout, Pressure

Loss Alarm, and Thermostatn Cooling Capacities from 3 to 12.5 tonsn Corrosion Resistant Stainless Cabinets and

SaveCoil 101 Coil Coatings *n Three-Year Limited Warranty

Series PB 20 combines air conditioning, pressur-ization, and make-up air filtration on one skid.Units offer convenient and economic means forachieving compliance with NFPA 496 and similarindustrial codes. A quiet, variable speed blowerautomatically maintains the preset building pres-sure. Only the make-up air required to offsetbuilding leakage and losses from door openings issupplied. Gone are sluggish response, constantneed for adjustments, and the high maintenanceassociated with barometric dampers. The units arefully instrumented with thermostat, pressure se-lector and display, and Start/Stop controls. Deepbed gas phase and high dirt loading filters areoptional. Dual (redundant) blowers and air condi-tioning with automatic switchover controls areoptional. Request Product Specification SheetAIPR

PB 20 Air Conditioners with

Pressurization and Air FiltrationPB 24 Air Conditioners with

Building Pressurization Controls


KoolKart® Industrial GradeMobile Air Conditioners

KoolKart® Magnum Hi-CapacityMobile Air Conditioners

FEATURESFEATURES

n Built for Demanding Industrial Applicationsn Cooling Capacities from 2 to 15 tonsn Models to 7-1/2 tons clear 34" door openingsn Built in Thermostat and Phase Indicatorn Special models for Humidity Control *n Adjustable Discharge Air Volumes and Pressuresn Disposable, 4" Pleated Air Filtersn High Dust Load, Carbon or HEPA Filters *n Full Pneumatic Tires, Lifting Lugsn Epoxy Primed with Attractive Urethane Finishn Electric Heaters for Year Round Use *n Explosion Proof Models for Cl. I, Grp. B, C and D

or Class II, Groups E, F and G, Div. 1 or 2 *n SaveCoil 101 Corrosion Protective Coil Coating *n Air Diffuser Walls for Sustained Cooling Comfort *

FEATURESFEATURES

n For Military and Industrial Applicationsn Cooling Capacities from 20 to 60 tonsn Single or Dual Axle Trailers for In-Plant

and Highway Use *n Explosion Proof Models for Class I and II *n Dual Cooling Circuits for Backup and

Capacity Controln Adjustable Blower Speeds, Outlet Air

Pressure and Flow Configurationsn Special models for Humidity Control *n Efficient U.L. Class 2 Air Filters or High

Dust, Carbon or HEPA Filters *n Oven Baked SaveCoil 101 Coil Coatings for

Maximum Corrosion Protection *n Electric Heaters for Year Round Use *

KoolKarts® are heavy-duty mobile air condition-ers engineered for cooling and dehumidification.Applications include manufacturing and process-ing areas and related control and storage build-ings. Optional explosion proof models meet NECrequirements for hazardous locations. Very rug-ged yet compact, KoolKarts® provide air condi-tioning for temporary or permanent installations.Air or water-cooled and fully self-contained,KoolKart® models to 15 tons are easily movedabout by one person. Units to 7-1/2 tons passthrough standard 34'' wide door openings. A singleKoolKart® discharges conditioned air through fromone to four ducts and over distances up to 125 feet.For increased personal comfort, an optional airdiffuser wall delivers the cooled air at low veloci-ties. All KoolKarts® are offered in 50 and 60 Hertzand in single and three phase voltage configura-tions. Special models are available for use atunusually high ambient temperatures.Request Product Specification Sheet KOMO


The KoolKart® Magnum Series covers the range of20 to 60 tons cooling capacity. These high capacityunits are the mobile cooling systems of choice withmilitary forces and industry throughout the world. Air orwater-cooled, KoolKart® Magnum units performefficiently at high ambient temperatures and in dirty,dusty, or corrosive environments. Explosion proofmodels are available for locations classified ashazardous under NEC Class I, Groups C and D orClass II, Groups E, F and G in Divisions 1 and 2. Thebasic units are assembled on I-beam frames. This rigidassembly can then be installed on trailers engineeredfor the specific application. Compressors, coils, motorsand related components are housed in corrosionprotected, heavy steel enclosures. Every effort hasbeen made to provide reliability, operating simplicityand the versatility necessary to meet demandingapplications. The result is equipment that isexceptionally rugged, simple to operate and requiresonly minimal maintenance and service.Request Product Specification Sheet KOMA

30 ton KKM in Skid Mount Version

UCX Series Explosion Proof Unit Coolers are foruse in walk-in coolers and freezers storing hazard-ous or flammable materials. Cooling capacitiesrange from 5000 to 240,000 BTUH. A range ofmodels are offered to comply with NEC Class I,Groups B, C or D in Divisions 1 or 2. Models arealso available built to IEC (CENELEC) standards.Units feature spark proof fans, aluminum housingsand drain pans. Fin spacings range from 4 to 8 finsper inch. All motors are TEFC. Low temperaturemodels have provision for hot gas defrost andinsulated drain pans. Stainless steel housings andstainless drain pans are optional, as are SaveCoil101 coil coatings for excellent corrosion protec-tion.Request Form SPUN1

UCX Series Explosion ProofUnit Coolers for Refrigeration

FEATURESFEATURES

n For NEC Class I, Groups B, C or D in Div. 1 or 2n Circuited for R-22, R-34a, R-404, HP 62 and

other refrigerantsn Models for High, Medium and Low Temperaturesn Explosion Proof Solenoid Valvesn Capacities from 5000 BTUH to 20 tonsn Choice of Fin Spacingsn Aluminum Housings and Drain Pansn SaveCoil 101 Corrosion Protective Coil Coatings,

Stainless Housings and Drains *n Freezer Models with Hot Gas Defrost, Insulated

and Heat Traced Drain Pansn Capacity Matched Condensing Units

FEATURESFEATURES

n NEC Class I, Groups B, C or D and Class II,Groups E, F and G for Divisions 1 and 2

n Models for Air Conditioning or Refrigerationn Capacities to 50 HPn Air or Water-Cooled Condensersn Cupro-Nickel Marine Condensers *n Industrial Grade, Quick Access Housingsn Totally Preassembled and Pretestedn Models for Severe Service, High Ambient

Temperatures and Corrosive Environmentsn Optional Explosion Proof Disconnect, Defrost

Timer, Oil Separator, Solenoid Valves andCrankcase Pressure Regulator (CPR)

CUX Series...Explosion Proof and

Severe Duty Condensing Units


CUX Series Explosion Proof and Severe ServiceCondensing Units are offered in a wide range ofmodels for use in hazardous and/or severe duty envi-ronments. These reliable cooling sources are engi-neered for applications ranging from comfort condi-tioning to freezer storage. Models are available tomatch AHX Series air handlers and UCX Series unitcoolers.

Request Form SPCO1

Request Product Specification Sheet EXEL


EHXP Series Explosion Proof Electric Heatersare offered in four (4) different series to meet mostany space heating requirements.

CV Series Economical convection heaters forfloor or wall installation with capaci-ties from 6,140 to 25,610 BTUH. Ther-mostats and disconnects are avail-able factory installed.

CF Series Compact forced air heaters for wall orceiling installation. Heating capaci-ties from10,240 to 40,980 BTUH.

SF Series Forced air heaters with wide selectionof "T" Codes. Ceiling or wall mountwith heating capacities from 25,600 to102,390 BTUH.

LF Series Feature liquid heat transfer mediumin a permanently sealed, liquid to airheat exchanger. Capacities from25,600 to 85,370 BTU per hour.

FEATURESFEATURES

n UL, FM, or CSA Listed for Hazardous Locationsn For NEC Temperature Codes T1 to T3Bn Heating Capacities from 6,140 to 102,390 BTUHn Models for Floor, Wall, and Ceiling Installationn HotKart Models for Mobile Usen Optional Thermostats and Disconnectsn Available in all Standard Power Configurations

and for 50 or 60 Hertz Service.

FEATURESFEATURES

n Easily Rolled to Location on Pneumatic Tiresn For NEC Class I, Groups C+D, Division 2n Temperature Codes to T3An Air Flow to 2000 CFMn Standard Heating Capacities to 20 kwn Proven in NASA and Industrial Applicationsn Built-In U.L. Class I Air Filtern Available in all Standard Power Configurations

and for 50 or 60 Hertz Service.

HotKart Mobile Heating Units were specifi-cally designed for use in hazardous locations.Proven on the Cape Canaveral launchpadand in industrial applications, these versatilecarts provide a safe source of electric heat thatis easily moved from one location to another.Standard units are sized from 500 to 2000CFM with larger models available on specialorder.

Contact Factory for Engineering Data Sheets

EHXP Series Explosion ProofElectric Heaters

HotKart Explosion ProofElectric Heater Carts

CAXP Series Explosion ProofControl Panel Air Conditioners

CAXP Series Electronic Control Cabinet AirConditioners are top quality commercial unitsthat have been factory modified for safe use inhazardous locations. These units meet therequirements of the National Electric Code (NEC)under Class I, Groups B, C or D, Division 2. Avariety of models is offered for installation on theside or top of electronic cabinets from two to sixfeet in height. Cabinet pressurization withsimultaneous air conditioning is also available asare models for corrosive or high ambienttemperature applications.Contact Factory for Engineering Data Sheetsand Load Calculations

FEATURESFEATURES

n Cooling Capacities from 2,000 to 19,000 BTUHn For Hazardous Locations Classified NEC

Class I, Groups B, C or D, Division 2n Compact Designs to Fit Top or Side of Cabinetn Models for Cabinets from 2 to 6 feet in Heightn Self-Contained, Pretested, Easy to Installn Special Models for Corrosive or Dusty Locationsn For 115V or 230 Volts, 60 Hz and also in

50 Hertz Models

RACX Explosion ProofCabin Roof Air Conditioners

FEATURESFEATURES

n Designed for Use on Crane Cabs, DrillingPlatforms and in Portable Buildings

n Impact and Vibration Resistantn Both Unit and Controls Classified NEC

Class I, Groups B, C and D, Division 2n Cooling Capacity 13,500 BTUHn Excellent Corrosion Protectionn Self-Contained, Pretested, Easy to Installn For 115V, 60 Hz

RACX Cabin Roof Explosion Proof AirConditioners are the units of choice for coolingsmall areas such as crane cabs and mud loggingbuildings. These compact air conditioners areclassified NEC Class I, Groups B, C and D for bothinside controls and all exterior components. A highimpact resistant plastic housing, plastic drain,coated condenser coil and special hardware arecombined to provide maximum corrosion protection.Construction features include a structuralcompressor support for maximum impactresistance. Available only for 115 V/1/60Hz.Contact Factory for Engineering Data Sheet

Preassembled and pretested Vapor Recovery SystemDesigned, Built and Installed by Scientific Systems

EXAI2CAT 8/98 ©1998 All Rights Reserved

Your Sales Representative is:

Visit our Websitewww.severeduty.com

9020 South Choctaw DriveBaton Rouge, Louisiana 70815 USA

Toll Free (800) 654-3857Phone (225) 926-6950FAX (225) 926-6973

"Turn-Key" Design and BuildInstallations

KoolKart MOBILE AIR CONDITIONERS

Since 1965

Systems for Corrosion, Odor,Dust, and Toxic Gas Control

Applications Engineered SystemsApplications Engineered Systems Design - Build, Install & Start-UpDesign - Build, Install & Start-Up

n Industrial HVAC Systems for Control Rooms, MotorControl Centers, Laboratories, AnalyzerShelters, and Storage Buildings

n Control Panels, Consoles and Cabinetsn Analyzer Systemsn Skid Mounted Pilot Plantsn Explosion Proof Process Chillersn Refrigerated Explosion Proof Storage Buildingsn Temperature and Humidity Test Chambersn Turbine Air Cooling Systemsn Water Treatment Laboratories

n Fully Integrated Air Conditioning / Pressurizationand Air Filtration Systems

n Performance / Cost Optimization of Entire Systemn Wide Choice of Filter Housings and Median Gas Phase, Particulate and Spin Type Filtersn Choice of Vendors for Replacement Median Filter Interchangeability with Existing Systemsn Phone or In-Plant Assistance and Support

High Capacity Deep Bed Filter for PBX 20Air Conditioning / Pressurization Systems

For 30+ years..........................Scientific Systems has designed and builtquality equipment and turn-key systemsfor industry. Let our experience guide you.Contact us today!

When designing and building air filtration systemsfor our customers, it is our policy to provide equip-ment and media with the best performance to costratio. Both the initial cost and the cost of maintain-ing the required system are carefully evaluated.The ability and know-how to design and build airconditioning, pressurization and filtration systemsunder one roof makes Scientific Systems equip-ment exceptionally effective and cost efficient.

industrial hvac/r products

Documents