instalar camara trasera (gracias a lucio)

Board index ‹ Your Tiguan ‹ Modifications & 'How to' Guides•Print view•

FAQ•Search •Photo Gallery•Register•Login•

Picture of reversing camera-as need to retrofit

Post a reply

Search this topic… Search

40 posts • Page 2 of 3 • 1, 2, 3

Re: Picture of reversing camera-as need to retrofit

by borbor1313 on Mon Aug 31, 2009 12:07 pm

Can you believe it - Im still waiting for my Fiscon bluetoothkit and reversing Module from Kufatec USA. I thought it would be easier ordering from US rather than Germany and since pricing about the same I thought english speaking location would be better in case of any problems.Looks like they are waiting on stock from Germany so it may be faster ordering from the Germany in the first place.

borbor1313 Member Posts: 19Joined: Sat Apr 18, 2009 12:50 pm

Top


by borbor1313 on Mon Sep 28, 2009 2:06 pm

ok here is the next bit.the rest will come in dribs and drabs.Any newbies please feel free to thank me.Any better shortcuts or suggestions are most welcome. Most frustrating part to taking off the panels which no one has ever produced a guide for the tiguan so here is my version. A panel removal tool would help but I didnt have one.Dont need one in the end so save yourself $30. remove the uppermost trim first

Página 1 de 48VW Tiguan Owners Forum • View topic - Picture of reversing camera-as need to retrofit

10/01/2010http://www.mytiguan.com/viewtopic.php?f=10&t=5961&start=15

next on the botton of the tailgate



Backto the upper trim you have just removed



de 48VW Tiguan Owners Forum • View topic - Picture of reversing camera-as need to retrofit


Now removed the side trim-only need to do one side,i chose left but either is ok



removal of licence plate light



Install new Touareg camera



Wiring



The guidewire -thin gauge but stiff metal wire for fencing or equivalent



Remember I had to replace the faulty wiring hence the video and power wires are different now



Once you have fed it throught the rubber tube,you must then feed it back down into the roof lining.Doing this in 2 parts is necessary.Feed a second guide wire as shown forwards and up out of the hole,then attach the first guide wire and pull back so fisrt guide wire comes out from under roof lining.



final tidy up - no need to remove panels inside the car unless you are nuts or have OCD.



ok thats it for this week.


Top


by NZTIGUAN on Mon Sep 28, 2009 7:49 pm

WOOOOOOOOOOOOOOW that's an impressive "how to". Can't wait to see the end of the story !!! CheersDerek Alexandra New Zealand http://www.alexandra.co.nz SilverLeaf, diesel, auto, 4motion, track & field, black leather, RCD 510, parkscan, m/function wheel, auto headlights/wipers, dual air, cruise, 17" LA with Michelin Latitude Diamaris rubber.



NZTIGUAN

myTiguan Pro Posts: 830Joined: Mon May 12, 2008 8:48 pmLocation: Alexandra, New Zealand

Top


by Kaine on Mon Sep 28, 2009 8:46 pm

http://www.jkavonline.co.uk SONOS - NOXON - JAMO - MONITOR AUDIO - MK SOUND - TANNOY - NUVO - LCD - PLASMA

Kaine

Site Admin Posts: 770Joined: Mon Nov 07, 2005 12:00 amLocation: Hills of Shropshire

Website•

Top


by arctra on Tue Sep 29, 2009 12:31 am

Brilliant post bobor! Thank you. Is quite a bit more work than I anticipated I must admit. Am interested to see the rest of the install with the running of the wires to the front. Are you removing paneling to do that, or just trying to hide the wires as best you can by sliding it into the gaps? I need to install a diversity antenna for my unit as well as the little antenna that came with it is useless. I reckon puttin it in the hatch lid would be a good idea. If that's the case I'll get all the wiring and stuff done at once. Looks like I need to leave a fair chunk of time available to do it though. Thanks again for the guide!

arctra Member Posts: 37Joined: Sat May 09, 2009 9:28 pm

Top


by borbor1313 on Tue Sep 29, 2009 1:35 am

Thanks guys

The write up took 3 times longer than the install itself. Only other panel that will need to come off will be rear panel with light and 12v.other than that should be able to tuck wires in and under to the front.




Top


by DurhamGeorge on Tue Sep 29, 2009 7:44 pm

Excellent job Borbor, on both counts George 2008 140TDI Sport, Manual in Reflex Silver

DurhamGeorge

Senior Member Posts: 169Joined: Fri Apr 24, 2009 8:37 pmLocation: 'County Durham' North East England

Top


by borbor3131 on Mon Oct 12, 2009 11:19 pm

I have a new NIC as have been unable to access the web site for some strange reason.Anyway will post remainder of the install tonight when I get home.Mountain Grey 2.0 TDI Auto , Comfort pack, Off road pack , Black Leather , aftermarket RNS510 , Kufatec IMA,Fiscon Basic plus bluetooth

borbor3131

Member Posts: 23Joined: Mon Oct 12, 2009 11:02 am

Top


by borbor3131 on Tue Oct 13, 2009 11:28 am

OK here is the rest of the install for anyone interested still. Removal of rear left boot panel



This step is optional , desirable but entails buying another tool



Only clipped in so be gentle



Looking inside/behind the panel



Wiring up Power to Camera.



Running video lead to head unit



The Kufatec IMA is required to gain video input in RNS510



Reconnect all the wiring and enjoy .



This bit is for FISCON BLUETOOTH UNIT that I installed at the same time



Mountain Grey 2.0 TDI Auto , Comfort pack, Off road pack , Black Leather , aftermarket RNS510 , Kufatec IMA,Fiscon Basic plus bluetooth

borbor3131


Top


by borbor3131 on Tue Oct 13, 2009 12:48 pm

I hope everyone has found this helpful. Personally it has been a very enjoyable exercise.It has taken alot of time and research to complete this and is really there for those of us who like to tinker.For any new car buyers reading this,I think I am still undecided on wether I would still pay the additional A$3500 for the rns51- rvc optional package or follow the path that I have taken.Non tinkers pay the $3500. Tinkers save yourself over $1700 For me the balance sheet reads ebay rns510 A$1550 kufatec ima/rvc interface us$180 ebay toureg camera A$100 DSE (Dck smith) wire taps A$5 electric tape A$5



Comparing apples with apples though ,the OEM controller cost about$1000 for reversing lines in the camera so ultimately savings in actually only $900.

For me I had a dispute with the ebay seller of the RNS510 and paypal refunded me $1400 so now i have a fully working RNS510 for $150

but thats another story OK thats it.

C'mon Kaine How about giving this thread a sticky for all this hard work?? Mountain Grey 2.0 TDI Auto , Comfort pack, Off road pack , Black Leather , aftermarket RNS510 , Kufatec IMA,Fiscon Basic plus bluetooth

borbor3131


Top


by arctra on Wed Oct 14, 2009 5:21 am

WOW! Thanks very much for this, it's nothing short of brilliant! Looks like a lot of hard work and now that I've seen what you've done I'm not sure I have the resolve to do it myself. There looks to be too much that could be broken by my rough hand. We'll see how it goes though. Oh, and I second your motion to have this thread stickied!

arctra Member Posts: 37Joined: Sat May 09, 2009 9:28 pm

Top


by Meraklis on Sat Nov 07, 2009 6:48 pm

Goodevening from Greece! I have a black Tiguan 1.4 TSI 150hp 4motion and I m very happy with this car. Due to my bad English I have not understand some points in your guide and i have some questions.

First of all borbor3131 thank you very much for the usefull "How to". Good Job! My questions:

1) The numbreplate light which you replace with the rear view camera, has also a small light which be turned on when you turn the the master switch lights? I'm doing this question because I saw on photo that you cut the cable of the numberplate light which you remove...

2) When do you have picture by rear camera? When you choose the rear gear OR when you select the rear view at RNS?

3) After the install of RNS-510 and Rear Cam, I will need the Vag-Com cable? And is this http://www.kufatec.de/shop/product_info ... di-VW.html the adapter which i need to connect the camera to RNS? These were my questions for the beginning

Sorry to tired you and for my bad English Thank you again!



Meraklis New member Posts: 6Joined: Sat Nov 07, 2009 5:34 pm

Top


by borbor3131 on Sun Nov 08, 2009 4:58 am

Your questions:

1) The numbreplate light which you replace with the rear view camera, has also a small light which be turned on when you turn the the master switch lights? I'm doing this question because I saw on photo that you cut the cable of the numberplate light which you remove...

2) When do you have picture by rear camera? When you choose the rear gear OR when you select the rear view at RNS?

3) After the install of RNS-510 and Rear Cam, I will need the Vag-Com cable? And is this http://www.kufatec.de/shop/product_info ... di-VW.html the adapter which i need to connect the camera to RNS[/quote] 1.the camera's number plate light is reconnected to the original wiring for the number plate light.Just make sure the polarity is correct as both wires are white 2.+3 the Kufatec RVC module you have linked too is correct. This is what I have. For the same price you can get the IMA module which in addition to RVC also has a extra set of video inputs with RCA plugs so in retrospect I would choose this. http://kufatec.com/index.php?main_page= ... ucts_id=92 The screen will automatically turn to rear view once reverse is selected. If you buy the IMA module you will have this --and also a rear chase view if you connect the output from the camera to both the reversing camera input and the extra videoinput of the IMA module ( which is not possible with the RVC module). A vagcom is a MUST HAVE. or ask your dealer to recode.Mountain Grey 2.0 TDI Auto , Comfort pack, Off road pack , Black Leather , aftermarket RNS510 , Kufatec IMA,Fiscon Basic plus bluetooth

borbor3131


Top


by Meraklis on Sun Nov 08, 2009 10:45 am

Thank you for your answer!

borbor3131 wrote:1.the camera's number plate light is reconnected to the original wiring for the number plate light.Just make sure the polarity is correct as both wires are white

Is this the camera which you has? http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0087235071 I see that the camera on the back has 2 wires, I suppose 1 for power and 1 for the video... Where is the camera's number plate light wire which I reconnect to the original wiring for the number plate light which I will cut when I will remove the original number plate light?

borbor3131 wrote:2+3. the Kufatec RVC module you have linked too is correct. This is what I have. For the same price you can get the IMA module which in addition to RVC also has a extra set of video inputs with RCA plugs so in retrospect I would choose this. http://kufatec.com/index.php?main_page= ... ucts_id=92



The screen will automatically turn to rear view once reverse is selected. If you buy the IMA module you will have this --and also a rear chase view if you connect the output from the camera to both the reversing camera input and the extra videoinput of the IMA module ( which is not possible with the RVC module)

Okay, I understand and thank you for the advice. But I need also this wire http://kufatec.com/index.php?main_page= ... cts_id=532 if i wil buy the IMA module, right?

borbor3131 wrote:A vagcom is a MUST HAVE. or ask your dealer to recode.

Is it simple for a new user like me to recode with the vagcom? Or it requires knowledge about vagcom?

Thank you again and sorry for my stupid questions!

Meraklis New member Posts: 6Joined: Sat Nov 07, 2009 5:34 pm

Top


by borbor3131 on Mon Nov 09, 2009 2:45 am

Meraklis wrote:Thank you for your answer!

borbor3131 wrote:1.the camera's number plate light is reconnected to the original wiring for the number plate light.Just make sure the polarity is correct as both wires are white

Is this the camera which you has? http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0087235071 I see that the camera on the back has 2 wires, I suppose 1 for power and 1 for the video... Where is the camera's number plate light wire which I reconnect to the original wiring for the number plate light which I will cut when I will remove the original number plate light? This camera also has 2 addition wires for power for the light,so 4 in total

borbor3131 wrote:2+3. the Kufatec RVC module you have linked too is correct. This is what I have. For the same price you can get the IMA module which in addition to RVC also has a extra set of video inputs with RCA plugs so in retrospect I would choose this. http://kufatec.com/index.php?main_page= ... ucts_id=92 The screen will automatically turn to rear view once reverse is selected. If you buy the IMA module you will have this --and also a rear chase view if you connect the output from the camera to both the reversing camera input and the extra videoinput of the IMA module ( which is not possible with the RVC module)

Okay, I understand and thank you for the advice. But I need also this wire http://kufatec.com/index.php?main_page= ... cts_id=532 if i wil buy the IMA module, right? yes

borbor3131 wrote:A vagcom is a MUST HAVE. or ask your dealer to recode.

Is it simple for a new user like me to recode with the vagcom? Or it requires knowledge about vagcom? Programming is very simple with vagcom

Thank you again and sorry for my stupid questions!

Mountain Grey 2.0 TDI Auto , Comfort pack, Off road pack , Black Leather , aftermarket RNS510 , Kufatec IMA,Fiscon Basic plus bluetooth



borbor3131


Top

PreviousNext Display posts from previous: All posts Sort by Post time Ascending Go

Post a reply40 posts • Page 2 of 3 • 1, 2, 3

Return to Modifications & 'How to' Guides

Jump to: Modifications & 'How to' Guides Go

Who is online

Users browsing this forum: rayvon and 6 guests

Board index•The team • Delete all board cookies • All times are UTC •

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group Arrow Theme By Echo -=Designs By Echo=- © 2007 Echo



instalar camara trasera (gracias a lucio)

Documents