install instructions for spss v23 - uab
TRANSCRIPT
Install Instructions for SPSS v23
If you have questions or need assistance installing software, please contact the AskIT Helpdesk via phone or email: (205) 996-5555 or [email protected] After downloading “SPSS” from the IT Software Download website (www.uab.edu/it/software), double-check the version that you downloaded to ensure that it matches your current operating system.
STEP 1
Verify your OS
Instructions for your download
STEP 2
ACCEPT the Licensing and Usage Terms of the Agreement at the bottom of the page to proceed to License Code:
STEP 3 Copy your activation code for your install and CLICK HERE at the bottom of the page
to download your selection:
STEP 4 You can SAVE it to your Desktop to RUN the .exe later; or OPEN to RUN the your
install immediately as follows:
**If you run into errors by OPEN and running immediately, you will need to start over and complete steps 5 & 6**
STEP 5 Select the IBM SPSS Installer and Extract All Files
STEP 6 Once extracted a NEW folder will pop up with the following contents, RIGHT click on SETUP
STEP 7 Right click and Run as administrator:
STEP 8 Preparing to Install…..
STEP 9 Licensing Information – Select NEXT
STEP 10 **Select Authorized user for desktop/individual installs – NEXT **
**ONLY Select Concurrent for Server use, NOT Desktop or Laptop**
**A separate license code must be requested from AskIT for these installs**
**ONLY Select Concurrent for Server use, NOT Desktop or Laptop**
**CONCURRENT – you only will see this screen and complete for concurrent/server installs ONLY **
STEP 11 Accept license agreement terms – NEXT
STEP 12 Leave this information as is, no updates necessary - NEXT
STEP 13 SPSS Language information can remain as is – NEXT
STEP 14 Assistive Technology information can remain as is– NEXT
STEP 15 Essentials for Python can remain as is (yes) – NEXT
STEP 16
Accept History of Software license agreement – NEXT
STEP 17 Accept Software License Agreement – NEXT
STEP 18
Install SPSS software - NEXT
STEP 19 Begin Installation – Select Install
STEP 20 Wait for install to complete
STEP 21 Click OK to start license authorization process
STEP 22 License my product now – NEXT
STEP 23 Copy & Paste, or enter the SPSS license code – the select NEXT
STEP 24 Authorization Succeeded – Select NEXT
STEP 25 Licensing Completed – Select Finish
STEP 26 This will appear once COMPLETED
NOTE: You CANNOT access SPSS until you restart your computer.
If you have questions or need assistance installing software, please contact the AskIT Helpdesk @ (205) 996-5555 or www.uab.edu/AskIT