installation instructions for part 99-4644. remove (2) screws from the driver’s side service panel...

28
APPLICATIONS CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition. NOTE: Refer to the instructions included with the aftermarket radio. INSTALLATION INSTRUCTIONS FOR PART 99-4644 • DIN and ISO radio provisions Also, for vehicles equipped with J-2000 panel-style • A) Radio housing • B) Flat faceplate • C) 1/2” Faceplate • D) 1” Faceplate • E) Rear support tray • F) ISO trimring • G) Bracket set #1 • H) Bracket set #2 • I) Bracket set #3 • J) Bracket set #4 • K) Bracket set #5 • L) Bracket set #6 • M) Bracket set #7 • N) Bracket set #8 • O) Bracket set #9 • P) Bracket set #10 • Q) ISO brackets • R) Bracket (L) S-10 • S) (4) Carriage bolts/studs • T) (4) Nuts • U) (4) Hex-head screws KIT FEATURES KIT COMPONENTS • Panel removal tool/flat head screwdriver • Torx-head screwdriver • Socket wrench TOOLS REQUIRED GM 1982-2005 99-4644 See application list inside B C A D E G H F I J L M K N O Q S P T U R

Upload: trandan

Post on 19-Mar-2018

216 views

Category:

Documents


2 download

TRANSCRIPT

APPLICATIONS

CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the aftermarket radio.

INSTALLATION INSTRUCTIONS FOR PART 99-4644

• DINandISOradioprovisions• Also, for vehicles equipped with J-2000

panel-style

•A)Radiohousing•B)Flatfaceplate•C)1/2”Faceplate•D)1”Faceplate•E)Rearsupporttray•F)ISOtrimring•G)Bracketset#1•H)Bracketset#2•I)Bracketset#3•J)Bracketset#4•K)Bracketset#5•L)Bracketset#6•M)Bracketset#7•N)Bracketset#8•O)Bracketset#9•P)Bracketset#10•Q)ISObrackets•R)Bracket(L)S-10•S)(4)Carriagebolts/studs•T)(4)Nuts•U)(4)Hex-headscrews

KIT FEATURES

KIT COMPONENTS

• Panelremovaltool/flatheadscrewdriver•Torx-headscrewdriver•Socketwrench

TOOLS REQUIRED

GM 1982-200599-4644

See application list inside

B CA D E

G HF I J

L MK N O

Q SP T UR

99-4644

Applications

* Note: The factory mounting bracket(s) must be retained and used with this vehicle.

Buick Century*...................... 1982-1996

Electra*........................ 1984-1990

EstateWagon*............. 1984-1994

LeSabre*..................... 1984-1994

ParkAvenue*............... 1984-1994

Reatta*........................ 1990-1991

Regal*......................... 1984-1987

Riviera*........................ 1983-1985

Riviera*........................ 1990-1995

Roadmaster................ 1991-1994

Skyhawk*.................... 1982-1989

Skylark*....................... 1983-1995

Cadillac

Cimarron.................... 1982-1988

DeVille*........................ 1985-1995

Eldorado*..................... 1984-1991

Escalade..................... 1999-2002

Fleetwood*.................. 1985-1992

Seville*........................ 1984-1991

ChevroletAstro........................... 1985-2005Avalanche.................... 2002Beretta....................... 1991-1996

Blazer(full)*................. 1989-1991C/KPickup.................. 1995-2000Camaro....................... 1982-1992Camaro....................... 1997-2002Caprice....................... 1991-1996Cavalier...................... 1982-1999

Celebrity*..................... 1982-1990

CitationII*.................... 1985Corsica....................... 1991-1996

Corvette*..................... 1984-1989Corvette...................... 1997-2004EICamino................... 1986-1987Express....................... 1996-2000

G-SeriesVan................ 1988-1996Impala........................ 1994-1996Lumina....................... 1990-2001LuminaAPV................ 1990-1996

Chevrolet (continued)

Malibu........................ 1997-2000

MonteCarlo................ 1986-1988

MonteCarlo................ 1995-1999

Nova........................... 1985-1988

S-10Blazer................ 1982-1994

S-10Blazer................ 1998-2001

S-10Pickup................ 1982-1993

S-10Pickup................ 1998-2001

Silverado.................... 1999-2002

Suburban*................... 1989-1991

Suburban.................... 1995-2002

Tahoe......................... 1995-2002

Venture....................... 1997-1999

GMCC/KPickup................... 1995-2000G-SeriesVan................ 1988-1995

Jimmy(full)*................ 1989-1991

S-15Jimmy................ 1998-2001

S-15Jimmy................ 1982-1994

GMC (continued)

S-15Pickup................ 1982-1990Safari.......................... 1985-2005Savana....................... 1996-2000Sierra......................... 1999-2002Sonoma....................... 1991-1993Sonoma...................... 1998-2001

Suburban*................... 1989-1991Suburban.................... 1995-1999Yukon......................... 1995-2002

IsuzuHombre....................... 1998-2001

OldsmobileAchieva*...................... 1992-1995Bravada...................... 1991-1994

CutlassCalais*............. 1984-1991

CutlassCiera*.............. 1982-1996

CutlassSupreme*........ 1984-1988

Delta88*..................... 1986-1988

Firenza*....................... 1982-1988

Oldsmobile (continued)

Ninety-Eight*............... 1984-1990Omega........................ 1983-1984Silhouette................... 1990-1999Toronado.................... 1982-1985

Pontiac6000........................... 1982-1991

Bonneville*.................. 1982-1999

Fiero*.......................... 1984-1988Firebird....................... 1982-2002

GrandAm*................... 1985-1995GrandAm................... 1996-2000

GrandPrix*.................. 1985-1987GrandPrix................... 1990-2003Montana..................... 1999Sunbird**.................... 1982-1988Sunfire........................ 1995-1999TransSport.................. 1990-1998

Saturn(allmodels)................. 1991-1994

** Note: Vehicles are equipped with J-2000 panel style factory radios.

1. Remove(4)screwsfromthetop-insideedgeofthedashtrimbezel.(FigureA)

2. Remove(5)screwsfrombothsidesofthesteeringcolumn.

3. Remove(3)Phillipsscrewssecuringtherockerswitchhousingandliftthehousingout.

4. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

5. Removeandretainthebrackets.

Buick Century1982-1996

Buick Reatta1990-1991

Buick Electra 1984-1990Buick Estate Wagon/LeSabre/Park Avenue

1984-1994

(Figure A) (Figure B)

(S-10applicationshownasexample)

1. Unsnaptheclimatecontroltrimbezelandremove(4)star-drivescrewsexposed.(FigureA)

2. Pullthesteeringcollarbackandcarefullyunsnapthedashtrimbezel.

3. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

4. Removeandretainthebrackets.

(Figure A) (Figure B)

(S-10applicationshownasexample)

1. Remove(2)torx-headscrewsabovetheinstrumentpanel.(FigureA)

2. Remove(1)torx-headscrewfromeachA/Cvent.(FigureA)

3. Unclipthedashtrimbezelandremove.

4. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

5. Removeandretainthebrackets.

(Figure A) (Figure B)

(S-10applicationshownasexample)

Dash Disassembly 99-4644

1. Removetheradioknobsandcigarettelighter.

2. Gentlyuncliptheradiotrimbezelandremove.(FigureA)

3. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

4. Remove and retain the brackets.

Buick Regal1984-1987

Buick Riviera1990-1995

Buick Riviera1983-1985

1. Carefullypullandremovethedash trimbezel.(FigureA)

2. Remove(4)screwssecuringthefactoryradioanddisconnectthewiring.

3. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

4. Removeandretainthebrackets.

1. Remove(2)torx-headscrewsabovetheinstrumentpanel.(FigureA)

2. Remove(1)torx-headscrewfromeachA/Cvent.(FigureA)

3. Unsnapthepanel.

4. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

5. Remove and retain the brackets.

(Figure A) (Figure B)

(S-10applicationshownasexample)

(Figure A) (Figure B)

(S-10applicationshownasexample)

(Figure A) (Figure B)

(S-10applicationshownasexample)

Dash Disassembly 99-4644

1. Remove(2)screwsfromthedriver’ssideservicepanelandunclipthepanel.

2. Pryoffthetrimpiecelocatedabovethegloveboxandremove(1)screw.

3. Remove(3)screwsfromthetopedgeofthedashtrimbezel.(FigureA)

4. Remove(1)screwfromthelower-leftcornerofthegloveboxand(1)screwfromtheparkingbrakerelease.

5. Removethedashtrimbezel.

6. CutandremoveallmountingtabsonBracket#4EXCEPTtabs“B”.(FigureB)

Note: Identify mounting tabs by the stamped letter on the back of each tab.

Buick Roadmaster 1991-1994Chevrolet Caprice 1991-1993

(Figure A)

(Figure B)

“B”

1. Removethegloveboxbyremovingthedoorstrapwireclipand(4)screws.(FigureA)

2. Remove(2)screwsbelowthecigarettelighterhousingand(3)screwsbelowthesteeringcolumn.(FigureA)

3. Remove(1)screwfromthetop-leftofthefactoryradioandunclipthedashtrimbezel.(FigureA)

4. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

5. Removeandretainthebrackets.

Buick Syhawk 1982-1989/OldsmobileFirenza 1982-1988

(Figure A)

(Figure B)

(S-10applicationshownasexample)

Dash Disassembly 99-4644

1. Remove(4)screwsfromthetopedgeoftheinstrumentpanel.(FigureA)

2. Remove(1)screwfromthebottom-leftcornerofthepanel.(FigureA)

3. Remove(2)screwsfromthesteeringcolumntrimandremovethetrim.

4. Pullupandoutonthedashtrimbezelandremove.

5. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

6. Removeandretainthebrackets.

Buick Skylark 1983-1986 Buick Skylark 1990-1995Buick Skylark1987-1989

1. Unsnapthegearshifterbezelfromthebaseoftheconsole.

2. Remove(2)screwssecuringthebottomofthedashtrimbezelandremovethebezel.(FigureA)

3. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

4. Removeandretainthebrackets.

1. Pulloutontheashtrayandremove(2)screwsexposedintheashtraycavity.

2. Remove(2)screwssecuringthefrontoftheashtrayandlowersectionofthedashtrimbezel.(FigureA)

3. Usingapanelremovaltool,gentlypryoutonthetrimbezelandremove.

4. Remove(2)nutsfromthebottomofthefactoryradioanddisconnectthewiring.

5. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

6. Removeandretainthebrackets.

(Figure A) (Figure B)

(S-10applicationshownasexample)

(Figure A) (Figure B)

(S-10applicationshownasexample)

(Figure A) (Figure B)

(S-10applicationshownasexample)

Dash Disassembly 99-4644

1. Remove(2)screwsfromthetopoftheradiotrimbezel.

2. Pulloutonthetopedgeofthebezelandliftuptoremove.(FigureA)

3. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

4. Removeandretainthebrackets.

Cadillac Deville 1985-1995Fleetwood 1985-1992

Cadillac Escalade, Escalade EXT/Chevrolet Avalanche,

C-K Pickup, Silverado, Suburban, Tahoe/GMC C-K Pickup, Sierra, Suburban,

Yukon 1995-2002

Cadillac Eldorado/Seville 1984-1991

1. Remove(2)PhillipsscrewsabovetheA/Cvents.(FigureA)

2. Pulloutonthetopedgeofthedashtrimbezelunhookthebottomedgeandremove.

3. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

4. Removeandretainthebrackets.

1. Removethesteeringcolumnfillerpanelandtheashtray.(FigureA)

2. Unclipthedashtrimbezelandremove.3. Usingasmallflat-bladescrewdriver,press

downontheouterclipsofthefactoryradio(orpocket).

4. Disconnectthewiringandremovetheradio.Locate Bracket Set #8. (Figure B)

(Figure A) (Figure B)

(S-10applicationshownasexample)

(Figure A) (Figure B)

(S-10applicationshownasexample)

(Figure A) (Figure B)

Dash Disassembly 99-4644

1. Remove(3)Phillipsscrewsfromthetopportionofthedashtrimbezel.(FigureA)

2. Openthegloveboxandremove(2)10mmboltsfromtheloweredgeofthetrimbezel.(FigureA)

3. Pulltheconsoletrimforwardandremove(2)7mmboltsexposed.

4. Gentlyunclipandremovethetrimbezel.Remove(2)7mmscrewsfromthefactoryradioanddisconnectthewiring.

5. CutandremoveallmountingtabsonBracket#3EXCEPTtabs“A”.(FigureA)

Note: Identify mounting tabs by the stamped letter on the back of each tab.

Chevrolet Astro/GMCSafari 1985-1989

Chevrolet Astro/GMCSafari 1996-2005

Chevrolet Astro/GMCSafari 1990-1995

1. Remove(2)screwsfromthebottomofthedashtrimbezel.(FigureA)

2. Gentlyunclipandremovethebezel.

3. Remove(4)screwsfromthefactoryradioanddisconnectthewiring.

4. CutandremoveallmountingtabsonBracket#1EXCEPTtabs“A”.(FigureB)

Note: Identify mounting tabs by the stamped letter on the back of each tab.

1. Placethegearselectorinitslowestposition.

2. Uncliptheperimeterofthedashtrimbezel.(FigureA)

3. DisconnecttherearA/Ccontrolharnessandtheheadlightswitchfromthebackofthedashtrimbezelandremovethebezel.

4. Usingaflat-bladescrewdriver,pressdownontheoutsideclipsofthefactoryradioandremove.

5. LocateBracketSet#8.(FigureB)

(Figure A) (Figure B) (Figure A) (Figure B) (Figure A) (Figure B)

“A”

“A”

“A”

Dash Disassembly 99-4644

1. Usingapanelremovaltool,pryoutwardonthedashtrimbezelandremove.(FigureA)

2. Remove(2)screwssecuringthefactoryradioanddisconnectthewiring.

3. LocateBracket#7.(FigureB)

Chevrolet Beretta/Corsica 1991-1996

Chevrolet S-10 Blazer/S-10 Pickup 1998-2001, GMC S-15 Jimmy/Sonoma 1998-2001, Isuzu Hombre

1998-2001

Chevrolet Blazer(fullsize)Suburban/GMC Jimmy (fullsize) Suburban 1989-1991

1. Remove(2)screwsfromtheradiotrimbezelandremovethebezel.(FigureA)

2. Remove(2)screwssecuringthefactoryradioanddisconnectthewiring.

3. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

4. Removeandretainthebrackets.

1. Remove(2)9/32”hex-headscrewsfromthekneebolster.(FigureA)

2. Pulldownonthebolsterandremove9/32”screwsexposedonthebaseofthedashtrimbezel.

3. Remove(1)Phillipsscrewabovethe instrumentcluster.

4. Unclipthedashtrimbezelandremove.5. Remove(2)9/32”hex-headscrewssecuringthe

factoryradioanddisconnectthewiring.6. LocateBracketSet#10.(FigureB)

(Figure A) (Figure B) (Figure A) (Figure B)

(S-10applicationshownasexample)

(Figure A) (Figure B)

Dash Disassembly 99-4644

1. Remove(4)star-drivescrewsfromthedashtrimbezelandremovethebezel.(FigureA)

2. Remove(4)screwssecuringthefactoryradioanddisconnectthewiring.

3. CutandremoveallmountingtabsonBracket#2EXCEPTthosetabswithholes“A”.(FigureB)

Note: Identify mounting tabs by the stamped letter on the back of each tab.

Chevrolet Camaro/PontiacFirebird 1982-1984

Chevrolet Camaro1997-2002

Chevrolet Camaro/PontiacFirebird 1985-1992

1. Remove(4)star-drivescrewsfromthedashtrimbezelandremovethebezel.(FigureA)

2. Remove(4)screwssecuringthefactoryradioanddisconnectthewiring.

3. CutandremoveallmountingtabsonBracket#2EXCEPTthosetabswithholes“B”.(FigureB)

Note: Identify mounting tabs by the stamped letter on the back of each tab.

1. Uncliptheradiotrimbezelandremove.(FigureA)

2. Remove(2)7mmhex-headscrewssecuringthefactoryradioanddisconnectthewiring.

3. LocateBracketSet#10.(FigureB)

Note: Identify mounting tabs by the stamped letter on the back of each tab.

(Figure A) (Figure B) (Figure A) (Figure B) (Figure A) (Figure B)

“A”

“B”

Dash Disassembly 99-4644

1. Remove(5)hex-headscrewsfromtheashtraycavity.(FigureA)

2. Remove(4)hex-headscrewsfromthebaseofthedashtrimbezel.(FigureA)

3. Unsnapthefuseboxcover andremove(1)hex-head screwexposed.

4. Remove(2)hex-headscrewsabovetheinstrumentcluster.(FigureA)

5. Placethegearselectorin “D1“.Pulloutontheclustertrimandremove.

6. Remove(1)hex-headscrewexposedontheleftedgeofthedashtrimbezel.

7. Unclipthedashtrimbezel(includingtheradiotrimbezel)andremove.

8. LocateBracketSet#10.(FigureB)

Chevrolet Caprice/Impala1994-1996

(Figure A)

(Figure B)

1. Remove(6)star-drivescrewsfromthedashtrimbezelandremovethebezel.(FigureA)

2. Remove(2)screwsfrom thefactoryradioanddisconnectthewiring.

3. CutandremoveallmountingtabsonBracket#4EXCEPTtabs“A”.(FigureB)

Note: Identify mounting tabs by the stamped letter on the back of each tab.

Chevrolet Cavalier 1982-1990,Cadillac Cimarron 1982-1988,

Pontiac Sunbird with J-2000 panel style factory radio 1982-1988

(Figure A)

(Figure B)

“A”

“A”

Dash Disassembly 99-4644

1. Usingapanelremovaltool,carefullypryoutonthedashtrimbezelandremove.(FigureA)

2. Remove(2)screwssecuringthefactoryradioanddisconnectthewiring.

3. CutandremoveallmountingtabsonBracket#3EXCEPTtabs“B”.(FigureB)

Note: Identify mounting tabs by the stamped letter on the back of each tab.

Chevrolet Cavalier1991-1994

Chevrolet Cavalier 1995-1999

1. Opendriversdoorandremovefusepanelonendofdashthenopenpassengerdoorandremovepanelonendofdash.

2. Remove(1)Phillipsscrewfromeachside,nowexposed.

3. Remove(3)7mmhex-headscrews fromthetopofthegloveboxliner.

4. Remove(2)7mmhex-headscrews fromthetop-leftcorneroftheglove boxcavity.

5. Remove(1)Phillipsscrewfromthedefrosterduct.

6. Removetheductworkand(1)Phillips screwexposed.

7. Removethedashpadand(3)Phillipsscrewsexposedatthetopoftheradiotrimbezel.(FigureA)

8. LocateBracketSet#10.(FigureB)

(Figure A) (Figure B) (Figure A) (Figure B)

“B”

“B”

Dash Disassembly 99-4644

1. RemovetheplasticplatenexttoeachA/Cventandremove(2)screwsexposed.(FigureA)

2. Remove(4)screwssurroundingthesteeringcolumn.(FigureA)

3. Depressthelightcontrolknobspringremovetheknobandliftthebezeloff.

4. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

5. Removeandretainthebrackets.

Chevrolet Celebrity1982-1983

Chevrolet Celebrity 1984-1990

1. Removethegloveboxcompartmentbydepressingthecliponthebottomofthegloveboxlinerandremoving(6)nutsexposedabovetheopening.(FigureA)

2. Remove(6)Phillipsscrewsbelowthe steeringcolumn.

3. Removetheheadlightknobbydepressingthecliponthebackoftheknobandremovingthenut.

4. Removethecigarettelighteranddisconnectthewiring.

5. Graspthelightersocket,unscrewthebrassnutonthebackofthelighterandremovethesocket.

6. Removethedashtrimbezelanddisconnectthewiring.

7. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

8. Removeandretainthebrackets.

(Figure A) (Figure A) (Figure B)(Figure B)

(S-10applicationshownasexample)

(S-10applicationshownasexample)

Dash Disassembly 99-4644

1. Remove(2)screwsfromthebottomsteeringcolumntrimpanelandremove.(FigureA)

2. Remove(6)screwsfromthedashtrimbezel,disconnectthewiringandremove.(FigureA)

3. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

4. Removeandretainthebrackets.

Chevrolet Citation II1985

Chevrolet Corvette1997-2004

Chevrolet Corvette1984-1989

1. Remove(7)screwsfromthedashtrimbezel.(FigureA)

2. Movethegearshiftertothelowestposition.

3. Pulltherightedgeofthebezelforward,unhooktheleftsideandremove.

4. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

5. Removeandretainthebrackets.

1. Pryoutontheridecontrolswitchanddisconnectthewiring.

2. Unsnaptheswitchtrimandremove(2)10mmhex-headboltsexposed.

3. Openthecenterconsoledoor,remove(4)screwsfromtheinnerhingeandremovethedoor.

4. Opentheashtrayandremove(1)screwexposed.Removetheashtrayand(1)screwexposed.

5. Unclipthesmallgrilletotheleftoftheignitionswitchandremove(1)screwexposed.

6. Unclipthebaseoftheradiotrimbezelandremove.(FigureA)

7. LocateBracketSet#10.(FigureB)

(Figure A) (Figure B)

(S-10applicationshownasexample)

(Figure A) (Figure B)

(S-10applicationshownasexample)

(Figure A) (Figure B)

Dash Disassembly 99-4644

1. Remove(4)screwsfromthedashtrimbezel.(FigureA)

2. Removethebezelanddisconnectthecigarettelighterwiring.

3. CutandremoveallmountingtabsonBracket#2EXCEPTtabs“C”.(FigureB)

Note: Identify mounting tabs by the stamped letter on the back of each tab.

Chevrolet El Camino1986-1987, Monte Carlo

1986-1988

Chevrolet Lumina1990-1994

Chevrolet Express/GMC Savana 1996-2000

1. Uncliptheplastictrimpiecelocatedbelowthesteeringcolumn.

2. Unclipthedashtrimbezel.Pullthebezeloverthesteeringcolumnanddisconnectthewiring.(FigureA)

3. Usingaflat-bladescrewdriver,pressdownontheoutsideclipsofthefactoryradioandremove.

4. LocateBracketSet#8.(FigureB)

1. Remove(2)screwsfromthelowersteeringcolumnpanel.

2. Pullthepaneldowntoaccessthebottomportionoftheradiotrimbezel.(FigureA)

3. Pullthetopandbottomedgesofthebezel.(FigureA)

4. CutandremoveallmountingtabsonBracket#5EXCEPTtabs“A”.(FigureB)

Note: Identify mounting tabs by the stamped letter on the back of each tab.

(Figure A) (Figure B) (Figure A) (Figure B) (Figure A) (Figure B)

“C”

“C”

“A”

“A”

“A”“A”

Dash Disassembly 99-4644

1. Remove(2)screwssecuringthelowersteeringcolumnpanelandremove.

2. Remove(2)screwsexposedonthelefttaboftheradiotrimbezel.(FigureA)

3. Openthegloveboxandremove(2)screwsexposedontherighttabsoftheradiotrimbezel.

4. CutandremoveallmountingtabsonBracket#6EXCEPTtabs“B”.(FigureB)

Note: Identify mounting tabs by the stamped letter on the back of each tab.

Chevrolet Lumina APV/Oldsmobile Silhouette/

Pontiac TransSport1990-1995

Chevrolet Malibu1997-2000

Chevrolet Lumina APV/Oldsmobile Silhouette/Pontiac

TransSport 19961. Uncliptheradiotrimbezel

andremove.

2. Remove(2)9/32”hex-headscrewssecuringthefactoryradioanddisconnectthewiring.(FigureA)

3. LocateBracketSet#10.(FigureB)

(Figure A) (Figure B) (Figure B)

“B”

“B”

1. Remove(1)Phillipsscrewfromeachsideofthecenterconsole.

2. Openthegloveboxandremove(2)Phillipsscrewsexposed.(FigureA)

3. Remove(2)7mmhex-headscrewsand(1)pop-clipfromthelowersteeringcolumnpanel,and(2)Phillipsscrewsexposedneartheclimatecontrols.

4. Remove(1)7mmhex-headscrewundertheglovebox.

5. Pulloutonthecenterconsoleandremove.

6. CutandremoveallmountingtabsonBracket#6EXCEPTtabs“B”.(FigureB)

Note: Identify mounting tabs by the stamped letter on the back of each tab.

(Figure A) (Figure B)

“B”

“B”

(Figure A)

Dash Disassembly 99-4644

1. Removetheashtrayand(2)screwsfromtheashtraybracket.(FigureA)

2. Remove(2)screwsabovetheradioopeningandremovetheradiotrimbezel.(FigureA)

3. CutandremoveallmountingtabsonBracket#1EXCEPTtabs“B”.(FigureB)

Note: Identify mounting tabs by the stamped letter on the back of each tab.

Chevrolet Nova1985-1988

Chevrolet S-10 Pickup 1986-1993/S-10 Blazer 1986-1994, GMC S-15

Pickup 1986-1990/S-15 Jimmy 1986-1994/Sonoma

1991-1993, Oldsmobile Bravada 1991-1994

Chevrolet S-10 Pickup/S-10 Blazer 1982-1985

GMC S-15 Pickup/S-15 Jimmy 1982-1985

1. Remove(4)star-drivescrewsfromthecornersofthedashtrimbezel.(FigureA)

2. Remove(1)star-drivescrewfromthelower-rightcorneroftheinstrumentclusterpanelandremovethedashtrimbezel.

3. CutandremoveallmountingtabsonBracket#5EXCEPTtabs“B”.(FigureB)

Note: Identify mounting tabs by the stamped letter on the back of each tab.

1. Removetheashtrayand(1)screwinsidetheashtraycavity.

2. Openthegloveboxandremove(2)screwsexposedontheedgeofthedashtrimbezel.(FigureA)

3. LocateBracket#(L)S-10andtherightBracketfromBracketSet#5.

4. CutandremoveallmountingtabsontherightBracketEXCEPTtoptab“B”.(FigureB)

Note: Identify mounting tabs by the stamped letter on the back of each tab.

(Figure A) (Figure B) (Figure A) (Figure B) (Figure A) (Figure B)

“B”

“B”

“B”

“B”

Dash Disassembly 99-4644

1. Carefullyunsnaptheradiotrimbezelandremove.(FigureA)

2. Remove(2)screwssecuringthefactoryradioanddisconnectthewiring.

3. Disconnectthenegativebatteryterminaltopreventanaccidentalshortcircuit.

4. Removetheashtrayand(1)Phillipsscrewexposedintheashtraycavity.

5. Remove(1)Phillipsscrew

fromthecigarettelightercompartment.

6. Remove(2)Phillipsscrewssecuringthefactoryradioanddisconnectthewiring.

7. CutandremoveallmountingtabsonBracket#1EXCEPTtabs“C”.(FigureB)

Note: Identify mounting tabs by the stamped letter on the back of each tab.

Chevrolet/GMC G-Series Van1988-1996

Chevrolet Venture/Oldsmobile Silhouette

1997-1999, Pontiac Montana 1999/Transport

1997-1998

1. Removetheashtrayand(1)Phillipsscrewexposedintheashtraycavity.

2. Remove(1)Phillipsscrewfromthecigarettelightercompartment.

3. Remove(2)Phillipsscrewssecuringthefactoryradioanddisconnectthewiring.

4. LocateBracketSet#10.(FigureB)

(Figure A) (Figure B)

“C”

“C”

(Figure A) (Figure B)

1. Unclipthedashtrimbezelandremove(itmaybenecessarytoloosenthekneebolster).(FigureA)

2. Remove(2)7mmhex-headscrewssecuringthefactoryradioanddisconnectthewiring.

3. LocateBracketSet#10.(FigureB)

Chevrolet Lumina 1995-2001/Monte Carlo 1995-1999

(Figure B)

(Figure A)

Dash Disassembly 99-4644

1. Placethegearshifterinlowandremovetherubbertrimbootfromthesteeringcolumn.

2. Remove(2)Phillipsscrewsfromtheradiotrimbezel.

3. Unhooktheashtray/lightwiringterminalandremovethetrimbezel.(FigureA)

4. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

5. Removeandretainthebrackets.

Oldsmobile Ninety-Eight 1984-1990/Delta 88

1986-1988

Oldsmobile Cutlass Calais 1984-1991

Oldsmobile Achieva1992-1995

1. Remove(4)screwsfromthetopedgeofthedashtrimbezel.(FigureA)

2. Remove(2)screwsfromthebottomedgeofthebezel.(FigureA)

3. UnsnaptheA/Cducts,disconnectthelightswitchandremovethebezel.

4. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

5. Removeandretainthebrackets.

1. Removetheconsole/gloveboxassemblyand(3)screwsbelowthebox.

2. Liftuptheparkingbraketrimandremove(2)screwsfromthegearshiftertrim.(FigureA)

3. Removetheashtrayfromthegearshifterareaand(2)7mmscrewsexposed.

4. Usingascrewdriver,depresstheretainertabsonthedashashtray,pulltheashtrayoutandremove(2)7mmhex-headscrewsfromtheashtraybracket.

5. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

6. Removeandretainthebrackets.

(Figure A) (Figure B)

(S-10applicationshownasexample)

(Figure A) (Figure B)

(S-10applicationshownasexample)

(Figure A) (Figure B)

(S-10applicationshownasexample)

Dash Disassembly 99-4644

1. Removetheashtrayand(2)screwsfromtheashtraylocation.(FigureA)

2. Remove(1)screwbelowand(2)screwsabovethesteeringcolumn.(FigureA)

3. PrytheA/Cventsoutandremovethescrewsexposedintheventcavities.

4. Remove(6)screwsfromtheedgeofthedashtrimbezelandremovethebezel.(FigureA)

5. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

6. Removeandretainthebrackets.

Oldsmobile Cutlass Ciera 1982-1996

Oldsmobile Omega1983-1984

Oldsmobile Cutlass Supreme 1984-1988

1. Removetheradiotrimbezel,andthendisconnectthecigarettelighterconnector.(FigureA)

2. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

3. Removeandretainthebrackets.

1. Remove(4)hex-headwasherscrewsfromthesteeringcolumntrimpanel,pulldownontherearedgeofthepanelandremove.

2. Remove(4)Phillipsscrewsfromthetopedgeofthedashtrimbezel.(FigureA)

3. Remove(2)hex-headwasherscrewsfromthebottomofthedashtrimbezelandremovethebezel.(FigureA)

4. CutandremoveallmountingtabsonBracket#2EXCEPTtabs“C”.

Note: Identify mounting tabs by the stamped letter on the back of each tab.

(Figure A) (Figure B)

(S-10applicationshownasexample)

(Figure A) (Figure B)

(S-10applicationshownasexample)

(Figure A) (Figure B)

“C”

“C”

“C”

“C”

Dash Disassembly 99-4644

1. Depressthecliplocatedbehindtheheadlightknobandremovetheknob.

2. Remove(3)screwssecuringthesteeringcolumntrimandremove.

3. Remove(4)screwsfromthebottomedgeofthedashtrimbezelandremove.(FigureA)

4. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

5. Removeandretainthebrackets.

Oldsmobile Toronado 1982-1985

Pontiac Bonneville1987-1993

Pontiac 60001982-1991

1. Openthegloveboxandremove(1)screwfromthesideoftheradiotrimbezel.(FigureA)

2. Gentlyremovethebezelfromthedashandthedummyplatefromthebezel.

3. CutandremoveallmountingtabsonBracket#5EXCEPTtabs“A”.(FigureA)

Note: Identify mounting tabs by the stamped letter on the back of each tab.

1. Gentlyunsnapandremovethedashtrimbezel.(FigureA)

2. Removethescrewssecuringthefactoryradioanddisconnectthewiring.

3. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

4. Removeandretainthebrackets.

(Figure A) (Figure B)

(S-10applicationshownasexample)

(Figure A) (Figure B) (Figure A) (Figure B)

(S-10applicationshownasexample)

“A”

“A”

Dash Disassembly 99-4644

1. Uncliptherightsideofthedashtrimbezel.(FigureA)

2. Uncliptheleftsideofthebezelandremove.(FigureA)

3. Remove(3)7mmhex-headscrewssecuringthefactoryradioanddisconnectthewiring.

4. LocateBracketSet#9.(FigureB)

Pontiac Bonneville1994-1999

Pontiac Firebird1993-2002

Pontiac Fiero 1984-1988

1. Remove(4)star-drivescrewsfromthedashtrimbezel.(FigureA)

2. Gentlypulloutonthetrimbezelandremove.

3. Remove(4)hex-headscrewsfromthefactoryradioanddisconnectthewiring.

4. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

5. Removeandretainthebrackets.

1. Uncliptheradiotrimbezel.(FigureA)

2. Remove(4)7mm hex-headscrewssecuringthefactoryradioanddisconnectthewiring.

3. LocateBracketSet#9.(FigureB)

(Figure A) (Figure B) (Figure A) (Figure B)

(S-10applicationshownasexample)

(Figure A)

(Figure B)

Dash Disassembly 99-4644

1. Carefullyunsnapthefrontedgeofthegearshifterconsolepanel.

2. Unsnapandremovethedashtrimbezel.(FigureA)

3. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

4. Removeandretainthebrackets.

Pontiac Grand Am1985-1991

Pontiac Grand Am1996-1998

Pontiac Grand Am1992-1995

1. Remove(6)7mmhex-headscrewsfromthedriver’ssidekneebolsterpanelandlowerthepanel.

2. Remove(4)Phillipsscrewsfromtheglovebox/cupholderassembly.

3. Remove(1)7mmhex-headscrewfromtheleftcornerofthedashtrimbezel.(FigureA)

4. Loosen(2)10mmnutsfromthetopofthefactoryradio,slidetheradiooutanddisconnectthewiring.(FigureA)

5. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

6. Removeandretainthebrackets.

1. Remove(2)Phillipsscrewsfromthepocket.

2. Remove(2)Phillipsscrewsabovetheinstrumentcluster.(FigureA)

3. Unclipthedashtrimbezelandremove.

4. Remove(3)7mmhex-headscrewssecuringthefactoryradioanddisconnectthewiring.

5. LocateBracketSet#9.(FigureB)

(Figure A) (Figure B)

(S-10applicationshownasexample)

(Figure A) (Figure B)

(S-10applicationshownasexample)

(Figure A) (Figure B)

Dash Disassembly 99-4644

1. Uncliptheradiotrimbezel.(FigureA)

2. Remove(3)9/32”screwssecuringthefactoryradioanddisconnectthewiring.

3. LocateBracketSet#9.(FigureB)

Pontiac Grand Am1999-2000

Pontiac Grand Prix1994-1996

Pontiac Grand Prix1990-1993

1. Remove(1)9/32”hex-headscrewfromthecomputerdiagnosticplugandtwisttoaccess(1)9/32”screwonthetrimpanel.

2. Remove(3)9/32”screwsfromthebottomedgeofthe panelandremove.

3. Openthegloveboxandremove(4)9/32”screwsfromthedashtrimbezel.(FigureA)

4. CutandremoveallmountingtabsonBracket#6EXCEPTtabs“B”.(FigureB)

Note: Identify mounting tabs by the stamped letter on the back of each tab.

1. Usingasmallsetofpliers,grasptheretainingcliponthebackofthegearshifterhandleandremovetheclip.

2. Removethegearshifterhandle.Unclipthecenterconsoleandremove.

3. Remove(2)7mmhex-headscrewsexposedundertheclimatecontrols.(FigureA)

4. Uncliptheradiotrimbezelandremove.(FigureA)

5. Remove(2)7mmhex-headscrewssecuringthefactoryradioanddisconnectthewiring.

6. LocateBracketSet#9.(FigureB)

(Figure B) (Figure A) (Figure B) (Figure A) (Figure B)

“B”

“B”

(Figure A)

Dash Disassembly 99-4644

1. Uncliptheentiredashtrimbezel.(FigureA)

2. Removethescrewssecuringthefactoryradioanddisconnectthewiring.

3. LocateBracketSet#9.(FigureB)

Pontiac Grand Prix1997-2003

(Figure A)

Pontiac Grand Prix 1985-1987Bonneville 1982-1986

1. Remove(3)screwsfromthetopedgeofthedashtrimbezel.

2. Remove(4)screwsfromthemetalsteeringcolumntrimandremovethetrim.

3. Remove(4)screwsexposedatthebottomedgeofthedashtrimbezel.

4. Removethecigarettelighterandretainerringandremovethedashtrimbezel.(FigureA)

5. Removethehardwaresecuringthefactorymountingbracketstothefactoryradio.(FigureB)

6. Removeandretainthebrackets.

(Figure A) (Figure B)(Figure B)

Dash Disassembly 99-4644

(S-10applicationshownasexample)

Saturn (allmodels) 1991-1994

1. Gentlyunclipthedashtrimbezel.(FigureA)

2. Remove(2)screwsfromthefactoryradioanddisconnectthewiring.

3. CutandremoveallmountingtabsonBracket#6EXCEPTtabs“A”.(FigureB)

Note: Identify mounting tabs by the stamped letter on the back of each tab.

(Figure A) (Figure B)

“A”

“A”

Dash Disassembly 99-4644

Pontiac Sunfire 1995-1999

1. Openthegloveboxandremove(2)Phillipsscrewsexposedontherightedgeoftheradiotrimbezel.(FigureA)

2. Unclipthebezelandremove.

3. Remove(2)7mmhex-headscrewssecuringthefactoryradioanddisconnectthewiring.

4. LocateBracketSet#9.(FigureB)

(Figure A) (Figure B)

DIN radio provision

Kit Assembly 99-4644

(Figure B)(Figure A)

1. Chooseafaceplate(accordingtothedesiredinstallationdepth)andsnapitontothefrontoftheradiohousingandsecurewith(4)hex-headscrews.(FigureA)

2. Securemountingbracketstotheradiohousingwiththesuppliedcarriageboltsandnuts.(FigureA)

3. Thensnaptherearsupporttrayontothebackoftheradiohousing.(FigureA)

4. SildetheDINcageintothekitandsecurebybendingthemetallockingtabs.(FigureB)

5. Locatethefactorywiringharnessandantennapluginthedash.MetrarecommendsusingthepropermatingadapterfromMetraorAXXESS.Re-connectthenegativebatteryterminalandtesttheradioforproperoperation

6. Reassembledashinreverseorderofdisassemblyusingscrewspreviouslyremoved.(FigureB)

ISO radio provision

Kit Assembly 99-4644

(Figure B)(Figure A)

1. Chooseafaceplate(accordingtothedesiredinstallationdepth)andsnapitontothefrontoftheradiohousingandsecurewith(4)hex-headscrews.(FigureA)

2. SnaptheISOtrimringintothebackofthefaceplate.(FigureA)

3. Securemountingbracketstotheradiohousingwiththesuppliedcarriageboltsandnuts.(FigureA)

4. ThenslidetheISObracketsontothetherearsupporttrayandsnapthetrayontothebackoftheradiohousing.(FigureA)

4. Slidetheradiointotheradioopening,aligningtheholesintheradiototheholesintheISObrackets.Thensecuretheradiotothebracketswiththesuppledscrews.(FigureB)

5. Locatethefactorywiringharnessandantennapluginthedash.MetrarecommendsusingthepropermatingadapterfromMetraorAXXESS.Re-connectthenegativebatteryterminalandtesttheradioforproperoperation.

6. Reassembledashinreverseorderofdisassemblyusingscrewspreviouslyremoved.(FigureB)