installation instructions for part inst-581fd · 4 dash disassembly inst-581fd 1. unclip and remove...

32
INSTALLATION INSTRUCTIONS FOR PART INST-581FD APPLICATIONS METRA. The World’s best kits. metraonline.com 1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION REV. 9/19/2013 INST-581FD CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition. NOTE: Refer to the instructions included with the aftermarket radio. • Double DIN radio provision • Stacked ISO units provision • DIN radio provision with pocket • ISO DIN radio provision with pocket • A) Radio housing (Double DIN and stacked ISO DIN) • B) Double DIN brackets • C) Spacers • D) (4) Screws • E) Radio housing • F) ISO brackets • G) Trim plate KIT FEATURES KIT COMPONENTS WIRING & ANTENNA CONNECTIONS (sold separately) Wiring Harness: • Please visit www.metraonline.com for specific interface applications Antenna Adapter: • 40-CR10 - Chrysler antenna adapter 2002-up • Cutting tool • Panel removal tool • Phillips screwdriver • Socket set TOOLS REQUIRED Ford/Lincoln/Mercury 2004-2008 AT-581FD/AW-581FD/CF-581FD/IBR-581FD See application list inside B C A D E F G

Upload: vukhanh

Post on 15-Aug-2018

217 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

INSTALLATION INSTRUCTIONS FOR PART INST-581FD

APPLICATIONS

METRA. The World’s best kits.™ metraonline.com1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION

REV.

9/1

9/20

13

INST

-581

FD

CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the aftermarket radio.

• DoubleDINradioprovision• StackedISOunitsprovision• DINradioprovisionwithpocket• ISODINradioprovisionwithpocket

•A)Radiohousing(DoubleDINandstackedISODIN)•B)DoubleDINbrackets•C)Spacers•D)(4)Screws•E)Radiohousing•F)ISObrackets•G)Trimplate

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS(soldseparately)

WiringHarness:•Pleasevisitwww.metraonline.comforspecific interfaceapplications

AntennaAdapter:•40-CR10-Chryslerantennaadapter2002-up

•Cuttingtool•Panelremovaltool•Phillipsscrewdriver•Socketset

TOOLS REQUIRED

Ford/Lincoln/Mercury 2004-2008AT-581FD/AW-581FD/CF-581FD/IBR-581FD

See application list inside

B CA D E

F G

Page 2: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

INST-581FD

Applications

2

FordEdge..............................2007-2008Expedition....................2007-2008Explorer........................2006-2008ExplorerSportTrac.......2006-2008F-150............................2004-2008F-SeriesSuperDuty......2005-2008FiveHundred................2005-2007Focus...........................2005-2007Freestar........................2004-2007Freestyle......................2005-2007Fusion..........................2006-2008Mustang.......................2005-2009Taurus..........................2008TaurusX.......................2008SuperDuty...................2008

LincolnMarkLT........................2005-2008MKX..............................2007-2009Navigator.......................2007-2008

MercuryMilan.............................2006-2008Mountaineer.................2006-2008Monterey......................2004-2007Montego.......................2005-2007Sable............................2008

Table of ContentsDash Disassembly

- FordEdge/Expedition2007-2008............................3

- FordExplorer/ExplorerSportTrac2006-2008..........6

- FordF-1502004-2008............................................3

- FordF-SeriesSuperDuty2005-2008......................7

- FordFiveHundred2005-2007.................................4

- FordFocus2005-2007............................................6

- FordFreestar2004-2007.........................................5

- FordFreestyle2005-2007.......................................5

- FordFusion2006-2008...........................................4

- FordMustang2005-2009........................................3

- FordTaurus2008.....................................................4

- FordTaurusX2008.................................................5

- FordSuperDuty2008..............................................7

- LincolnMarkLT2005-2008.....................................3

- LincolnMKX2007-2009..........................................8

- LincolnNavigator2007-2008..................................8

- MercuryMilan2006-2008.......................................4

- MercuryMountaineer2006-2008............................6

- MercuryMonterey2004-2007.................................5

- MercuryMontego2005-2007..................................4

- MercurySable2008................................................4

Kit Assembly

- DoubleDINradioprovision.......................................9

- StackedISOunitprovision.....................................10

- DINradioprovisionwithpocket.............................11

- ISOradioprovisionwithpocket..............................12

Page 3: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

3

Dash Disassembly INST-581FD

1. Unsnapandremoveentirepanelsurroundingtheradioandclimatecontrols.(FigureA)

2. Remove(4)9/32”screwstoremovethefactoryradio.(FigureB)

Continue to kit assembly

Ford F-150 2004-2008, Ford Expedition/Edge

2007-2008, Lincoln Mark LT 2005-2008

1. Removethesmallrectangularshifterlevertrimpanelifequipped.(FigureA)

2. Remove(2)Phillipsscrewsfromunderthecenterarmrestatthebackoftheshiftertrimpanel(includingcupholders).(FigureB)

3. Unclipandremovepanel.(FigureB)

4. Unclipandremovethe(2)centerstacktrimpanelsfromtheleftandrightsideoftheradioandclimatecontrols.(FigureC)

5. Remove(6)9/32”screwsfromcentertrimpanelsurroundingtheradioandclimatecontrolsthenunclipandremovepanel.(FigureD)

6. Remove(4)9/32”screwsfromtheradiotoremove.(FigureE)

Continue to kit assembly

Ford Mustang 2005-2009

(Figure B)(Figure A)

(Figure B)

(Figure A)

(Figure D)

(Figure C)

(Figure E)

Page 4: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

4

Dash Disassembly INST-581FD

1. Unclipandremovethesmallrectangulartrimaroundshiftlever.(FigureA)

2. Unclipandremovetheentirepanel(includingcupholders)surroundingtheshiftlever.(FigureB)

3. Remove(2)9/32”screwsatthebottomofthecenterradio/climatecontrolpanel.(FigureC)

4. Unclipandremovethecenterpanel.(FigureD)

5. Remove(4)9/32”screwsfromtheradiotoremove.(FigureE)

Continue to kit assembly

Ford Five Hundred 2005-2007/Taurus 2008Mercury Montego 2005-2007/Sable 2008

(Figure B)

(Figure A)

(Figure D)

(Figure C)

(Figure E)

1. Unsnapandremoveentirepanelsurroundingtheradioandclimatecontrols.(FigureA)

2. Remove(4)9/32”screwstoremovethefactoryradio.(FigureB)

Continue to kit assembly

Ford Fusion 2006-2008Mercury Milan 2006-2008

(Figure B)(Figure A)

Page 5: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

5

Dash Disassembly INST-581FD

1. UnclipandremoveentirepanelsurroundingtheradioandA/Ccontrols.(FigureA)

2. Remove(4)9/32”screwsfromradiotoremove.(FigureB)

Continue to kit assembly

Ford Freestyle 2005-2007Ford Taurus X 2008

(Figure B)

1. Unsnapandremoveentirepanelsurroundingtheradioandclimatecontrols.(FigureA)

2. Remove(4)9/32”screwstoremovethefactoryradio.(FigureB)

Continue to kit assembly

(Figure B)

Ford Freestar 2004-2007Mercury Monterey 2004-2007

(Figure A) (Figure A)

Page 6: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

6

Dash Disassembly INST-581FD

1. Unsnapandremoveentirepanelsurroundingtheradioandclimatecontrols.(FigureA)

2. Remove(4)9/32”screwstoremovethefactoryradio.(FigureB)

Continue to kit assembly

Ford Focus 2005-2007

(Figure B)

1. Opencenterconsoleandremove(2)Phillipsscrewsthenunclipandremoveentirepanelsurroundingshifter.(FigureA)

2. Removedashpanelsurroundingradiotoaccessthefactoryradioscrews.(FigureB)

3. Remove(4)9/32”screwstoremovethefactoryradio.(FigureC)

Continue to kit assembly

Ford Explorer/Explorer Sport Trac2006-2008, Mercury Mountaineer

2006-2008

(Figure A)

(Figure C)

(Figure B)

(Figure A)

Page 7: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

7

1. Unsnapandremoveentirepanelsurroundingtheradioandclimatecontrols.(FigureA)

2. Remove(4)9/32”screwstoremovethefactoryradio.(FigureB)

Continue to kit assembly

Ford F-Series Super Duty 2005-2008 Ford Super Duty 2008

Dash Disassembly INST-581FD

(Figure A)

1. Unclipandremovethepoweroutletpanelandtheblankpanelontheleftandrightsideoftheradiotrimpanel.(FigureA)

2. Removethe(2)9/32”screwsexposedbehindthetwopanelspreviouslyremoved.

3. UnclipandremovetheentireradiotrimpanelincludingtheA/Ccontrolandvents.

4. Remove(4)9/32”screwssecuringtheradio.

Continue to kit assembly

(Figure B) (Figure A)

Page 8: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

8

Dash Disassembly INST-581FD

1. Opencenterconsolelidandunclipandremovethecenterconsoletrimpanelsurroundingtheshifter.(FigureA)

2. Remove(2)Phillipsscrewsfromthestoragebinthenunclipandremovethebin.(FigureB)

3. Unclipandremovetheupperandlowercentertrimpanelasoneassembly.(FigureC)

4. Remove(4)9/32”screwssecuringtheradio.Unplugandremovetheradio.

Continue to kit assembly

Lincoln MKX 2007-2009

(Figure C)

(Figure B)

(Figure A)

1. Unclipandremovethepanelsurroundingtheshifter.(FigureA)

2. Remove(2)9/32”screwsfromthebottomoftheradio/climatecontroltrimpanel.(FigureB)

3. Unclipandremovetheentirepanelsurroundingtheradioandincludingtheclimatecontrols.(FigureB)

4. Remove(4)9/32”screwssecuringtheradio.UnplugandremovetheRadio.

Continue to kit assembly

Lincoln Navigator2007-2008

(Figure B)(Figure A)

Page 9: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

9

Kit Assembly INST-581FD

1. Forthe2007 Ford Edge/Expedition, 2006-2007 Explorer/Fusion/Mercury Milan, 2004-2007 F-150, 2005-2007 Five Hundred/Freestyle/Mustang/Mercury Montego, 2005-2007 Lincoln Mark LT and the 2008 Super Duty,cutandremovetherearmountingtabsfromtheDoubleDINBrackets.

If your vehicle is not listed above move to Step 2.

2. Forthe2007 Ford Edge/Expedition, 2006-2007 Explorer, 2006-2007 Fusion, 2007 Mustang and the 2008 Super Duty attachtheincludedspacerstothebackoftheradiohousingmountingtabs. (FigureA)

If your vehicle is not listed above move to Step 3.

3. AttachthedoubleDINbracketstotheradiohousing.(FigureBandC)

Note: The notch in the housing should be on top.

4. SlidetheDoubleDINradiointotheradiohousing/bracketassemblyandsecuretheradiototheassemblyusingthescrewssuppliedwiththeradio.(FigureD)

5. Locatethefactorywiringharnessinthedash.MetrarecommendsusingthepropermatingadapterfromMetraorAXXESS.Re-connectthenegativebatteryterminalandtesttheunitforproperoperation.

6. Reassembledashinreverseorderofdisassembly.

Double DIN radio provision

(Figure A) (Figure B) (Figure C) (Figure D)

Page 10: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

10

Kit Assembly INST-581FD

1. Forthe2007 Ford Edge/Expedition, 2006-2007 Explorer/Fusion/Mercury Milan, 2004-2007 F-150, 2005-2007 Five Hundred/Freestyle/Mustang/Mercury Montego, 2005-2007 Lincoln Mark LT and the 2008 Ford Super Duty,cutandremovetherearmountingtabsfromtheDoubleDINBrackets.

If your vehicle is not listed above move to Step 2.

2. Forthe2007 Ford Edge/Expedition, 2006-2007 Ford Explorer, 2006-2007 Ford Fusion, 2007 Mustang and the 2008 Super Dutyattachtheincludedspacerstothebackoftheradiohousingmountingtabs.(FigureA)

If your vehicle is not listed above move to Step 3.

3. AttachthedoubleDINbracketstotheradiohousing.

Note: The notch in the housing should be on top.(FigureBandC)

4. SlidetheISOmountunitsintotheradiohousing/bracketassemblyandsecuretheunitstotheassemblyusingthescrewssuppliedwiththeunits.(FigureD)

5. Locatethefactorywiringharnessinthedash.MetrarecommendsusingthepropermatingadapterfromMetraorAXXESS.Re-connectthenegativebatteryterminalandtesttheunitforproperoperation.

6. Reassembledashinreverseorderofdisassembly.

Stacked ISO units provision

(Figure A) (Figure B) (Figure C) (Figure D)

Page 11: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

11

Kit Assembly INST-581FD

1. (a)FortheFord Edge/Expedition 2007, Explorer 2006-2007, Fusion 2006-2007, Mustang 2007 and the Super Duty 2008 attachtheincludedspacerstothebackoftheradiohousingmountingtabs.(FigureA)

Note: Use the screws supplied with this kit to mount the radio housing in the vehicles that require the spacers.

(b)FortheFord Freestar 2004-2007, Monterey 2004-2007, Focus 2005-2007, and the F-Series Super Duty 2005-2007,slidetheincludedbracketsontothesidesoftheradiohousingspocketfromthebackofthehousingforward.(FigureB)

If your vehicle is not listed above move to Step 2.

2. SlidetheDINcageintotheRadioHousingandsecurebybendingthemetallockingtabsoutward.(FigureC)

3. Slidetheaftermarketradiointothecageuntilitsnapsinplace.(FigureD)

4. Locatethefactorywiringharnessinthedash.Metrarecommendsusing

thepropermatingadapterfromMetraorAXXESS.Re-connectthenegativebatteryterminalandtesttheunitforproperoperation.

5. Reassembledashinreverseorderofdisassembly.

DIN radio provision with pocket

(Figure A) (Figure B) (Figure C) (Figure D)

Page 12: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

12

Kit Assembly INST-581FD

1. (a)FortheFord Edge/Expedition 2007, Explorer 2006-2007, Fusion 2006-2007, Mustang 2007 and the Super Duty 2008 attachtheincludedspacerstothebackoftheradiohousingmountingtabs.(FigureA)

Note: Use the screws supplied with this kit to mount the radio housing in the vehicles that require the spacers.

(b)FortheFord Freestar 2004-2007, Monterey 2004-2007, Focus 2005-2007, and the F-Series Super Duty 2005-2007,slidetheincludedbracketsontothesidesoftheradiohousingspocketfromthebackofthehousingforward.(FigureB)

If your vehicle is not listed above move to Step 2.

2. MounttheISOBracketstotheheadunitwiththescrewssuppliedwiththeunit.(FigureC)

3. Slidetheheadunitintotheradioopeninguntilthesideclipsengage.(FigureD)

4. SnaptheTrimplateintotheRadioHousing.(FigureD)

5. Locatethefactorywiringharnessinthedash.MetrarecommendsusingthepropermatingadapterfromMetraorAXXESS.Re-connectthenegativebatteryterminalandtesttheunitforproperoperation.

6. Reassembledashinreverseorderofdisassembly.

ISO radio provision with pocket

(Figure A) (Figure B) (Figure C) (Figure D)

Page 13: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

INST-581FD

Notes

Page 14: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

INST-581FD

Notes

Page 15: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

INST-581FD

Notes

Page 16: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

INSTALLATION INSTRUCTIONS FOR PART INST-581FD

METRA. The World’s best kits.™ metraonline.com1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION

REV.

9/1

9/20

13

INST

-581

FD

KNOWLEDGE IS POWEREnhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.

Metra recommends MECP certified technicians

Page 17: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA INST-581FD

APLICACIONES

METRA. The World’s best kits.™ metraonline.com1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION

REV.

9/1

9/20

13

INST

-581

FD

PRECAUCIÓN: Metra recomienda desconectar el terminal negativo de la batería antes de comenzar cualquier instalación. Todos los accesorios, interruptores y, especialmente, las luces indicadoras de airbag deben estar enchufados antes de volver a conectar la batería o comenzar el ciclo de ignición.

NOTA: Remítase a las instrucciones incluidas con el radio de postventa.

• ProvisiónradiodobleDIN• ProvisiónderadioISOvertical• ProvisiónradioDINconbolsillo• ProvisiónradioDINISOconbolsillo

•A)Carcasadelradio(DobleDINeISODINvertical)•B)SoportesdobleDIN•C)Espaciadores•D)(4)tornillos•E)Carcasadelradio•F)SoportesISO•G)Placademoldura

CARACTERÍSTICAS DEL KIT

COMPONENTES DEL KIT

•Herramientadecorte•Herramientaderemocióndepanel•DestornilladorPhillips•Tomadeconjunto

HERRAMIENTAS REquERIDAS

Ford/Lincoln/Mercury 2004-2008AT-581FD/AW-581FD/CF-581FD/IBR-581FD

Lista de aplicaciones dentroCABLEADO Y CONEXIONES DE ANTENAArnésdecableado:

•Visitewww.metraonline.comparaver aplicacionesespecíficasdeinterfase

Adaptadordeantena:•40-CR10-Cableadaptadordeantena Chrysler2002

(sevendenporseparado)

B CA D E

F G

Page 18: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

INST-581FD

Aplicaciones

2

FordEdge..............................2007-2008Expedition....................2007-2008Explorer........................2006-2008ExplorerSportTrac.......2006-2008F-150............................2004-2008F-SeriesSuperDuty......2005-2008FiveHundred................2005-2007Focus...........................2005-2007Freestar........................2004-2007Freestyle......................2005-2007Fusion..........................2006-2008Mustang.......................2005-2009Taurus..........................2008TaurusX.......................2008SuperDuty...................2008

LincolnMarkLT........................2005-2008MKX..............................2007-2009Navigator.......................2007-2008

MercuryMilan.............................2006-2008Mountaineer.................2006-2008Monterey......................2004-2007Montego.......................2005-2007Sable............................2008

ÍndiceDesmontaje del tablero

- FordEdge/Expedition2007-2008............................3

- FordExplorer/ExplorerSportTrac2006-2008..........6

- FordF-1502004-2008............................................3

- FordF-SeriesSuperDuty2005-2008......................7

- FordFiveHundred2005-2007.................................4

- FordFocus2005-2007............................................6

- FordFreestar2004-2007.........................................5

- FordFreestyle2005-2007.......................................5

- FordFusion2006-2008...........................................4

- FordMustang2005-2009........................................3

- FordTaurus2008.....................................................4

- FordTaurusX2008.................................................5

- FordSuperDuty2008..............................................7

- LincolnMarkLT2005-2008.....................................3

- LincolnMKX2007-2009..........................................8

- LincolnNavigator2007-2008..................................8

- MercuryMilan2006-2008.......................................4

- MercuryMountaineer2006-2008............................6

- MercuryMonterey2004-2007.................................5

- MercuryMontego2005-2007..................................4

- MercurySable2008................................................4

Ensamble del kit

- ProvisiónradiodobleDIN.........................................9

- StackedISOunitprovision.....................................10

- ProvisiónradioDINconbolsillo..............................11

- ProvisiónradioISOconbolsillo..............................12

Page 19: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

3

Desmontaje del tablero INST-581FD

1. Suelteapresiónyquitetodoelpanelquerodeaelradioyloscontrolesdelclima.(FiguraA)

2. Quitelos(4)tornillosde9/32”paraquitarelradiodefábrica.(FiguraB)

Continuará al ensamble del kit

Ford F-150 2004-2008, Ford Expedition/Edge

2007-2008, Lincoln Mark LT 2005-2008

1. Quiteelpequeñopaneldelamolduradelapalancadevelocidadessiseincluye.(FiguraA)

2. Quitelos(2)tornillosPhillipsdedebajodeldescansabrazoscentralenlaparteposteriordelpaneldelamolduradelapalancadevelocidades(incluyendolosportavasos).(FiguraB)

3. Desengancheyquiteelpanel.(FiguraB)

4. Desengancheyquitelos(2)panelesdemolduradelapilacentraldelladoizquierdoyderechodelradiodefábricayloscontrolesdelclima.(FiguraC)

5. Quitelos(6)tornillosde9/32”delpaneldemolduracentralquerodeaelradioyloscontrolesdelclimayluegodesengancheyquiteelpanel.(FiguraD)

6. Quitelos(4)tornillosde9/32”delradioparaquitarlo.(FiguraE)

Continuará al ensamble del kit

Ford Mustang 2005-2009

(Figura B)(Figura A)

(Figura B)

(Figura A)

(Figura D)

(Figura C)

(Figura E)

Page 20: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

4

Desmontaje del tablero INST-581FD

1. Desengancheyquitelapequeñamoldurarectangularquerodealapalancadevelocidades.(FiguraA)

2. Desengancheyquitetodoelpanel(incluyendolosportavasos)querodealapalancadevelocidades.(FiguraB)

3. Quitelos(2)tornillosde9/32”delaparteinferiordelpanelcentraldecontroldelradio/clima.(FiguraC)

4. Desengancheyquiteelpanelcentral.(FiguraD)

5. Quitelos(4)tornillosde9/32”delradioparaquitarlo.(FiguraE)

Continuará al ensamble del kit

Ford Five Hundred 2005-2007/Taurus 2008Mercury Montego 2005-2007/Sable 2008

(Figura B)

(Figura A)

(Figura D)

(Figura C)

(Figura E)

1. Suelteapresiónyquitetodoelpanelquerodeaelradioyloscontrolesdelclima.(FiguraA)

2. Quitelos(4)tornillosde9/32”paraquitarelradiodefábrica.(FiguraB)

Continuará al ensamble del kit

Ford Fusion 2006-2008Mercury Milan 2006-2008

(Figura B)(Figura A)

Page 21: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

5

Desmontaje del tablero INST-581FD

1. UnclipandremoveentirepanelsurroundingtheradioandA/Ccontrols.(FiguraA)

2. Quitelos(4)tornillosde9/32”delradioparaquitarlo.(FiguraB)

Continuará al ensamble del kit

Ford Freestyle 2005-2007Ford Taurus X 2008

(Figura B)

1. Suelteapresiónyquitetodoelpanelquerodeaelradioyloscontrolesdelclima.(FiguraA)

2. Quitelos(4)tornillosde9/32”paraquitarelradiodefábrica.(FiguraB)

Continuará al ensamble del kit

(Figura B)

Ford Freestar 2004-2007Mercury Monterey 2004-2007

(Figura A) (Figura A)

Page 22: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

6

Desmontaje del tablero INST-581FD

1. Suelteapresiónyquitetodoelpanelquerodeaelradioyloscontrolesdelclima.(FiguraA)

2. Quitelos(4)tornillosde9/32”paraquitarelradiodefábrica.(FiguraB)

Continuará al ensamble del kit

Ford Focus 2005-2007

(Figura B)

1. Abralaconsolacentralyretirelos(2)tornillosPhillips,luegodesengancheyquitetodoelpanelquerodealapalancadevelocidades.(FiguraA)

2. Quiteelpaneldeltableroquerodeaelradioparateneraccesoalostornillosdelradiodefábrica.(FiguraB)

3. Quitelos(4)tornillosde9/32”paraquitarelradiodefábrica.(FiguraC)

Continuará al ensamble del kit

Ford Explorer/Explorer Sport Trac2006-2008, Mercury Mountaineer

2006-2008

(Figura A)

(Figura C)

(Figura B)

(Figura A)

Page 23: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

7

1. Suelteapresiónyquitetodoelpanelquerodeaelradioyloscontrolesdelclima.(FiguraA)

2. Quitelos(4)tornillosde9/32”paraquitarelradiodefábrica.(FiguraB)

Continuará al ensamble del kit

Ford F-Series Super Duty 2005-2008 Ford Super Duty 2008

Desmontaje del tablero INST-581FD

(Figura A)

1. Desengancheyquiteelpaneldeltomacorrienteyelpaneldetapadelladoizquierdoyderechodelpaneldelamolduradelradio.(FiguraA)

2. Quitelos(2)tornillosde9/32”expuestosdetrásdelosdospanelesquequitóanteriormente.

3. Desengancheyquitetodoelpaneldelamolduradelradio,incluyendoelcontrolylasrejillasdelaireacondicionado.

4. Quitelos(4)tornillosde9/32”quesujetanelradio.

Continuará al ensamble del kit

(Figura B) (Figura A)

Page 24: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

8

Desmontaje del tablero INST-581FD

1. Abralatapadelaconsolacentralydesengancheyquiteelpaneldelamolduradelaconsolacentralquerodealapalancadevelocidades.(FiguraA)

2. Quitelos(2)tornillosPhillipsdelcajóndealmacenamientoyluegodesengancheyquiteelcajón.(FiguraB)

3. Desengancheyquiteelpanelsuperioreinferiordelamolduracentralcomounmismoensamble.(FiguraC)

4. Quitelos(4)tornillosde9/32”quesujetanelradio.Desconecteyquiteelradio.

Continuará al ensamble del kit

Lincoln MKX 2007-2009

(Figura C)

(Figura B)

(Figura A)

1. Desengancheyquiteelpanelquerodealapalancadevelocidades.(FiguraA)

2. Quitelos(2)tornillosde9/32”delaparteinferiordelpaneldelamolduradecontroldelradio/clima.(FiguraB)

3. Desengancheyquitetodoelpanelquerodeaelradio,incluyendoloscontrolesdelclima.(FiguraB)

4. Quitelos(4)tornillosde9/32”quesujetanelradio.Desconecteyquiteelradio.

Continuará al ensamble del kit

Lincoln Navigator2007-2008

(Figura B)(Figura A)

Page 25: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

9

Ensamble del kit INST-581FD

1. Para2007 Ford Edge/Expedition, 2006-2007 Explorer/Fusion/Mercury Milan, 2004-2007 F-150, 2005-2007 Five Hundred/Freestyle/Mustang/Mercury Montego, 2005-2007 Lincoln Mark LT and the 2008 Super Duty,corteyquitelaspestañastraserasdemontajedelossoportesDobleDIN.

ISi su vehículo no se incluye en esta lista, vaya al 2.

2. Para2007 Ford Edge/Expedition, 2006-2007 Explorer, 2006-2007 Fusion, 2007 Mustang y the 2008 Super Duty coloquelosespaciadoresincluidosenlaparteposteriordelaspestañasdemontajedelacarcasadelradio. (FiguraA)

Si su vehículo no se incluye en esta lista, vaya al Paso 3.

3. Unalossoportescorrespondientes

dobleDINalacarcasadelradio.(FiguraByC)

Nota: La muesca de la carcasa debe estar en la parte superior.

4. DesliceelradiodobleDINenelsoporte/ensambledelradioysujeteelradioalensambleutilizandolostornillossuministradosconelradio.(FiguraD)

5. Ubiqueelarnésdecableadodefábricaeneltablero.MetrarecomiendaelusodeunadaptadoradecuadodeacoplamientodeMetraodeAXXESS.Vuelvaaconectarlaterminalnegativadelabateríaypruebelaunidadparaverificarquefuncionecorrectamente.

6. Vuelvaaarmareltableroalrevésdecomolodesarmó.

Provisión radio doble DIN

(Figura A) (Figura B) (Figura C) (Figura D)

Page 26: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

10

Ensamble del kit INST-581FD

1. Para2007 Ford Edge/Expedition, 2006-2007 Explorer/Fusion/Mercury Milan, 2004-2007 F-150, 2005-2007 Five Hundred/Freestyle/Mustang/Mercury Montego, 2005-2007 Lincoln Mark LT and the 2008 Ford Super Duty,corteyquitelaspestañastraserasdemontajedelossoportesDobleDIN.

Si su vehículo no se incluye en esta lista, vaya al Paso 2.

2. Para2007 Ford Edge/Expedition, 2006-2007 Ford Explorer, 2006-2007 Ford Fusion, 2007 Mustang and the 2008 Super Dutycoloquelosespaciadoresincluidosenlaparteposteriordelaspestañasdemontajedelacarcasadelradio.(FiguraA)

Si su vehículo no se incluye en esta lista, vaya al Paso 3.

3. Unalossoportescorrespondientes

dobleDINalacarcasadelradio.

Nota: La muesca de la carcasa debe estar en la parte superior. (FiguraByC)

4. DeslicelasunidadesdemontajeISOenelensambledesoporte/carcasadelradioysujetelasunidadesalensambleutilizandolostornillossuministradosconlasunidades.(FiguraD)

5. Ubiqueelarnésdecableadodefábricaeneltablero.MetrarecomiendaelusodeunadaptadoradecuadodeacoplamientodeMetraodeAXXESS.Vuelvaaconectarlaterminalnegativadelabateríaypruebelaunidadparaverificarquefuncionecorrectamente.

6. Vuelvaaarmareltableroalrevésdecomolodesarmó.

Provisión de radio ISO vertical

(Figura A) (Figura B) (Figura C) (Figura D)

Page 27: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

11

Ensamble del kit INST-581FD

1. (a)ParaFord Edge/Expedition 2007, Explorer 2006-2007, Fusion 2006-2007, Mustang 2007 and the Super Duty 2008 coloquelosespaciadoresincluidosenlaparteposteriordelaspestañasdemontajedelacarcasadelradio.(FiguraA)

Nota: Use los tornillos suministrados con este kit para montar la carcasa del radio en los vehículos que requieran los espaciadores.

(b)ParaFord Freestar 2004-2007, Monterey 2004-2007, Focus 2005-2007, and the F-Series Super Duty 2005-2007,deslicelossoportesincluidosenlosladosdelacavidaddelascarcasasdelradiodesdelaparteposteriordelacarcasahaciaadelante.(FiguraB)

Si su vehículo no se incluye en esta lista, vaya al Paso 2.

2. DeslicelarejaDINenlacarcasadelradioysujételadoblandohaciaafueralaspestañasdemetal.(FiguraC)

3. Desliceelradiodemercadosecundarioenlarejahastaqueentreapresión.(FiguraD)

4. Ubiqueelarnésdecableadodefábricaeneltablero.Metra

recomiendaelusodeunadaptadoradecuadodeacoplamientodeMetraodeAXXESS.Vuelvaaconectarlaterminalnegativadelabateríaypruebelaunidadparaverificarquefuncionecorrectamente.

5. Vuelvaaarmareltableroalrevésdecomolodesarmó.

Provisión radio DIN con bolsillo

(Figura A) (Figura B) (Figura C) (Figura D)

Page 28: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

12

Ensamble del kit INST-581FD

1. (a)ParaFord Edge/Expedition 2007, Explorer 2006-2007, Fusion 2006-2007, Mustang 2007 y the Super Duty 2008 coloquelosespaciadoresincluidosenlaparteposteriordelaspestañasdemontajedelacarcasadelradio.(FiguraA)

Nota: Use los tornillos suministrados con este kit para montar la carcasa del radio en los vehículos que requieran los espaciadores.

(b)ParaFord Freestar 2004-2007, Monterey 2004-2007, Focus 2005-2007, and the F-Series Super Duty 2005-2007,deslicelossoportesincluidosenlosladosdelacavidaddelascarcasasdelradiodesdelaparteposteriordelacarcasahaciaadelante.(FiguraB)

Si su vehículo no se incluye en esta lista, vaya al Paso 2.

2. MontelossoportesISOenlaunidadcentralconlostornillosincluidosconlaunidad.(FiguraC)

3. Deslicelaunidadcentralenlaaperturadelradiohastaquelosganchoslateralesentrenapresión.(FiguraD)

4. Coloqueapresiónlaplacadelamolduraenlacarcasadelradio.(FiguraD)

5. Ubiqueelarnésdecableadodefábricaeneltablero.MetrarecomiendaelusodeunadaptadoradecuadodeacoplamientodeMetraodeAXXESS.Vuelvaaconectarlaterminalnegativadelabateríaypruebelaunidadparaverificarquefuncionecorrectamente.

6. Vuelvaaarmareltableroalrevésdecomolodesarmó.

Provisión radio ISO con bolsillo

(Figura A) (Figura B) (Figura C) (Figura D)

Page 29: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

INST-581FD

Notas

Page 30: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

INST-581FD

Notas

Page 31: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

INST-581FD

Notas

Page 32: INSTALLATION INSTRUCTIONS FOR PART INST-581FD · 4 Dash Disassembly INST-581FD 1. Unclip and remove the small rectangular trim around shift lever. (Figure A) 2. Unclip and remove

INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA INST-581FD

METRA. The World’s best kits.™ metraonline.com1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION

REV.

9/1

9/20

13

INST

-581

FD

KNOWLEDGE IS POWEREnhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.

Metra recomienda técnicos con certificación del Programa de Certificación en Electrónica Móvil (Mobile Electronics Certification Program, MECP).

EL CONOCIMIENTO ES PODERMejoresushabilidadesdeinstalaciónyfabricacióninscribiéndoseenlaescueladedispositivoselectrónicosmóvilesmásreconocidayrespetadadenuestraindustria.Regístreseenwww.installerinstitute.comollameal800-354-6782paraobtenermásinformaciónyavancehaciaunfuturomejor.