integrated smoke & fire 2012
DESCRIPTION
TRANSCRIPT
Integrated Restoration specializes in and is an
experienced SMOKE & FIRE
RESTORATION general contractor.
RESIDENTIALCOMMERCIALINDUSTRIAL
Residential Puff Back. The source of the oily soot is a fuel oil
furnace puff back. All surfaces throughout the home were coated. Cleaning required extensive use of
appropriate alkaline cleaner / degreasers.
After detail cleaning the entire home was painted. Better than before for this
home in Mantua, Ohio.
Residential Fire Design/Build Restoration involved an
1800’s post and beam home in Dover, Ohio. Brought in as a consultant, Integrated Restoration was ultimately
hired by the homeowner who was pleased with the design alterations replacing an attic with two bedrooms
and a bath.
Residential Fire Restoration involved a whole home interior gut and
rebuild. This is the kitchen before and after.
Commercial Multi Tenant Apartment and Pub Fire
restoration included 12 apartment units and a Restaurant – Lounge.
This particular unit’s repair included a layout redesign, yielding additional
rental dollars for the owner.
This is one of the gutted kitchen units. Cabinet and counter space were added
along with a microwave for contemporary look and function.
Employing Odor Control Technology; surfactants, pairing agents and
Hydroxyl technology, the common hall smoke and fire damage was immediately
deodorized, cleaned and sealed.
Temporary doors were installed on two occupied floors. This isolated the
devastated units beyond...
from the occupied units that required only general cleaning and painting.
The tenants could remain in their units while the halls were finished and the
heavily damaged units were completely restored. This enabled the owner to
maintain his tenant base.
The immediate cleaning of the lounge, Integrated Restoration’s installation of a Hydroxyl Generator, HEPA air scrubber, Dehumidifier and high CFM air movers enabled the lounge to be cleaned, dried out, and remain open for the St Patrick’s Day business.
Commercial Service Station
fire restoration. An automobile in one bay caught fire. It ignited the vehicle in the adjoining bay along with the interior and part of the exterior of the structure.
Structural repairs, ceiling replacement, cleaning and painting were completed
in three weeks. Integrated Restoration’s processes and efficiency
saved the owner downtime and the carrier significant exposure in ALE
expense.
Industrial Plant Fire resulted in the total destruction of one portion of the facility housing high tech
CNC equipment. A second building required major restoration.
Called out for Emergency services, Integrated Restoration provided
temporary power, heat, and lighting. We immediately instituted a necessary structural dry out. We also installed a temporary security door separating the
two affected structures.
The Integrated Restoration project entailed the demo and complete rebuild
of the North Building of the manufacturing complex from footers
up.
The reconstruction entailed shot blasting the existing concrete floors as prep for the restoration of the epoxy
floor coating that was in both damaged structures.
From the manufacturer of the new building siding, we received the
material and color match. The paint was matched and applied to the
remaining structure. At project’s culmination, the entire “new”
manufacturing facility was uniform in color and profile.
Concurrent with the North building demo and rebuild, Integrated
Restoration crews were restoring the South building shop and management
offices.
After rebuild, cleaning, prime and painting, mechanicals were brought up to code. Machinery was installed. The manufacturing company was back up
and running in their new facility.