ip dix200-flyer-rev-a ip remultiplexer streamer
TRANSCRIPT
Professional Headend Solutions
IP
Med
iaS
olu
tio
ns
256 IP inputs with multicast and unicast connections
100Base-T and 1000Base-T operation mode
Four independent TS Remultiplexers with gigabit IP output
Each Remultiplexer part supports 12 PSI Inserters
More than 2 Gbit integrated storage capacity
PCR corrector for each PID value
Automatic and manual Service Identifier and PID handling (PID Remapping)
IPTV Streamer mode with logically and physically separated IP output
Ideally suited for EDGE-QAM family EQM 10x
SNMP remote control facility
Low power consumption (typically 35 W), high reliability, long life time
DIX 200 IP-REMULTIPLEXER/STREAMERThe DIX 200 IP Remultiplexer &
Streamer represents the latest
generation of transport stream
remultiplexers and is capable of
simultaneously processing the data
streams of more than 1000 radio and
television programs coming from
256 sources. Four independent MPEG
TS are multiplexed and provided IP
encapsulated at the GbE - output.
External sources like Scrambling-
and EPG-Data can be inserted.
The data rate of the GbE Input can be
utilized in 100 %, and no limitations
exist in the PID filtering and PID
Remapping. Statistical PCR correc-
tion results in a full error correction
on all services. The IP Remultiplexer
& Streamer is equipped with an
integrated TS analyzer and complete
diagnostic module.
Beyond the remultiplexer functions,
the DIX 200 IP Remultiplexer &
Streamer can be used without any
additional unit as streamer in IPTV
systems and as gateway in tele-
communication networks.
The DIX 200 setup and programming
has to be done by a software tool
connected over a network to the
Ethernet control port. For the
monitoring of the device within an
Network Management System (NMS)
an SNMP agent is applicable.
IP Media Solutions
FEATURES
DIX 200IP-Remultiplexer/Streamer
Professional Headend Solutions
©2009
BLAN
KO
MD
igitalG
mbH
Subje
ct
tom
odific
ations
05/
BLANKOM Digital GmbHTecCenter 31162 Bad Salzdetfurth/Germany
Phone: +49(0) 50 63/27 11 0 Fax: +49(0) 50 63/27 11 60
�
�
www.blankom-digital.de
Technical Data
Rear view DIX 200
Associated BLANKOM Products- DRD 694
- DIP 120/121
- EQM 100/101/102
8PSK/QPSK TWIN RECEIVER
IP GATEWAYS
EDGE QAM MODULATORS
IP Input, IP Output
Transmission Characteristics
General Data
IP input and output 1000Base-T / 100Base-T
(auto negotiation)
Operational mode full duplex
Protocol IPv4 (prepared for IPv6)
Number of inputs 256 unicast/multicast connections
IP output physically and logically
independent from the IP input
Number of connectors 2 × RJ-45
Input data rate 1000 Mbit/s
(theoretic max. of 1000Base-T)
Output data rate max. 4 × 100 Mbit/s
Number of TS Remultiplexers 4 (independently programmable
units)
Number of PID Filter
/Remappers 4 × 256 × 8192
Number of output inserters 4 × 12 Output Inserters
Programming/supervision by free external software
Front panel LED displays 2 × LINK, ACT, GIGABIT
4 × STREAM with OVERFLOW
display
Weight approx. 3.5 kg
Size 19” × 1 RU
W × H × D 483 × 43.6 × 473 mm
Power requirement 90 … 264 VAC, 47 … 440 Hz
Power consumption max. 35 VA
Operating temp. range + 5 … + 40 °C
Relative humidity max. 80 %
Storage temperature range - 25 ... + 45 oC
Relative humidity max. 95 %, non-condensing
ww
w.b
lan
ko
m-d
igit
al.
de
DIX 200 IP-REMULTIPLEXER/STREAMER
HFC-Network
IP-Network
EQM 10x
EDGE-QAM
DIX 200
IP-Remux
DIX 200
IP-Remux
DRD 694
DVB-S2 Receiver
Central
IP-Remuxing
Local
IP-Remuxing