KanopyPRODUCT SPECIFICATION

T: 01747 858100 | E: sales@dexeco.co.uk | Page 1 of 4

INTRODUCTION

Lighting petrol station forecourts can be extremely costly especially when operating a 24 hour premises when the filling area

must be lit throughout the night but customer visits may be infrequent in the early hours of the morning. The Kanopy must be

lit effectively so as not to deter potential customers however the energy costs incurred by doing so can be extremely high, the

Dexeco Kanopy luminaire provides a simple solution to this problem.

The Kanopy is available with two lumen outputs and beam angles ensuring it can be used to replace both HID and

fluorescent luminaires. Dexeco can also offer a range of custom sized trims to suit the existing cut out in your canopy to

ensure that no expensive modifications are required during installation.

With two sensor options, the R11 sensor for presence detection and the R44 sensor for both presence detection and daylight

regulation, the Kanopy can be programmed to dim back to lower output during periods of absence ensuring that the canopy

remains lit whilst providing large energy savings throughout the night. Both sensor types can be programmed with our REA-

AP controller from ground level ensuring that the settings can be easily modified allowing you to customise how long the

luminaire remains at full output for and the level to which it dims back to along with a range of other customisable settings.

The Kanopy provides rapid return on investment against both fluorescent and HID luminaires through a combination of low

cost installation, highly efficient LED sources providing up to 125 luminaire lumens per circuit watt and sensor control

ensuring that the luminaire is only operating when necessary but without compromising the appearance of the station during

hours of darkness.

APPLICATION

Exterior

Parking/Exterior

KanopyPRODUCT SPECIFICATION

T: 01747 858100 | E: sales@dexeco.co.uk | Page 2 of 4

Transport

Warehouse/Storage

SPECIFICATION

Construction

White powder painted steel housing.

Internal injection moulded optical cover with 8,700 lumen version.

Internal Miro 851 reflector to maximise optical efficiency.

Clear polycarbonate diffuser.

Performance

Up to 125 luminaire lumens per circuit watt.

87% Light Output Ratio.

Constant lumen output function eliminates depreciation of the source over lifetime.

L2 compliant.

ECA compliant.

Control

Available with R11H (presence detection) and R44SA (presence detection and daylight regulation) sensors.

Programmable from ground level with the Dexeco REA-AP remote control.

Installation

Custom trim sizes allow for installation in a range of canopy apertures minimising modifications required to the canopy and

therefore reducing the cost of installation.

Range of lumen outputs and beam distributions allows for one for one installation at a range of heights and spaces

ensuring the wiring and canopies do not need to be modified.

Variations

Two beam angles, lumen outputs and sensor options available to allow you to customise the Kanopy to suit your canopy

height and luminaire layout.

IMAGES

Product Images

KanopyPRODUCT SPECIFICATION

T: 01747 858100 | E: sales@dexeco.co.uk | Page 3 of 4

Project Images

TECHNICAL

CP-0125-0003.PDF

KanopyPRODUCT SPECIFICATION

T: 01747 858100 | E: sales@dexeco.co.uk | Page 4 of 4

WARRANTY

All Dextra products are supplied with a 12 month warranty for any defect that may occur with the product during this time.

Any defect will either be repaired on site free of charge or the defective product may be replaced on a chargeable basis and

credit given against defective product returned. The course of action taken will be at our discretion and dependent on the

nature of the defect.

The control gear within our high frequency and LED luminaires is further underwritten by our suppliers for a period of up to 5

years in total from the time of purchase. This comprises labour and parts for the first 3 years and free of charge components

only for the final 2 years.

PROTEC LED FR 8W GU10 variants and Emergency LED ranges are exempt from the 5 year warranty and are supplied with

1 year warranty only. PROTEC LED COB luminaires are supplied with a two year warranty for replacement luminaires only.

All warranties are subject to correct use of the product and will be invalidated by misuse, for example incorrect installation or

unsuitable environmental conditions.

It is the duty of the customer to ensure that all relevant tests have been carried out prior to requesting site visits or

replacement products, for example replacement of lamps, commissioning of sensors and inspection of external wiring. In the

event that no defect is found with the product our costs for attending site will be recharged to the customer and credit will not

be issued against returned products.

No consequential losses incurred resulting from any defect with our product will be reimbursed.

Consumable commodities such as lamps, starters and batteries are excluded from these warranty terms. Batteries are

supplied with a twelve month warranty only.

5 year warranty on LED product ranges is subject to a maximum of 4000 operating hours per year and only applies where

failures exceed the component manufacturers expected failure rate and lumen depreciation.

If you require any assistance with regards to our products please do not hesitate to contact our Customer Services

department on 01747 858100.

ORDER CODES

Luminaire Codes

Code Description Circuit Wattage Llm/w

PFC L87 C84 Petrol Forecourt Kanopy, 8700 Lumen, Colour 84 61.7w 120

PFC L120 C84 Petrol Forecourt Kanopy, 12000 Lumen, Opal Diffuser, Colour 84 85.8w 115

Lighting Control

Code Description

R11HW Reacta 11, HFR, Wide Lens

R44SH Reacta 44, Shallow, DSI