kverneland rigid power harrow h series 0 series production in q1_2016 30 units available (3 &...
TRANSCRIPT
Kverneland Rigid Power Harrow
H series
0 series production in Q1_2016
30 units available (3 & 4m)
2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H
91150C
NG-S
• Many well-proven features from NG-H and NG-S 101 have been brought into this new H series
• New look, less weight, less maintenance and simpler adjustments
H series – For tractors up to 180hp
2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H
91150C
NG-S
• Tough headstock – lighter than previous NG-H 101 model (in 3m -55kg on base machine)
• Standard connection for hydrolift and Accord triangle and all KV integrated seeders
• Cat. II or Cat. III tractor connections. Oscillating lower link arms
H series – Headstock
2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H
91150C
NG-S
•25 cm rotor distance
•Helical positioning of tines
•Improved performance
•Improved levelling
•Lower power requirement
•Safes fuel, lower cost per
hectare
H series – Trough transmission concept
2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H
91150C
NG-S
Height of gears 40mm
Ø of shaft 45/50mm
Conical bearing, int. Ø 50mm, outer Ø 100mm
Conical bearing int. Ø 45mm, outer Ø 85mm
Distance of bearings 55mm midth - midth
Trough 6mm special profile
Cassette sealing
Tine holder bolted to the trough, gives easy access to the seals
Cone housing welded to trough
H series – Trough
Double body trough all length welded
Quick Fit tines as standard
2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H
91150C
NG-S
• Self supporting structure
• Conical bearing system
• High rigidity even when loaded
• Quick Fit Tines
• Simple clear design
• Easy and low maintenance
H series – Trough key points
2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H
91150C
NG-S
• Allows residues and stones
to pass through easily
• Especially in combination
with active tines
• Gives easy access to
change the tines
High Clearance of 95mm
with the following benefits:
95mm
H series – Rotor Clearance
2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H
91150C
NG-S
Wide tine holder• Reduces stress and wear of tines
and tines pocket
• Tines are fixed by pin and clip (Quick fit system standard offer)
• No tools necessary to change tines
Pins fixed at top and bottom:• No bending, no stress on the clip
H series – Quick Fit Tines
• Different type of tines; standard shape, positive angle and carbide treated for longer working life (always 320x15mm)
2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H
91150C
NG-S
H series – Driveline
• PTO shaft (GKN) with automatic clutch to prevent gearbox overload
• Gearbox with change gears; pto input at 1000rpm for a rotors output of 336rpm
• Different gearset possibilities (option) for 290, 360 and 450rpm rotor
• Always with rear pto shaft for seeders connections
• Compact design and maximum reliability
2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H
91150C
NG-S
• Side deflector falls down under 3m working width
• Spring loaded security• Possibility to move up and
downwards to follow the ground contours
• Flexible to open sideways to prevent stones and big clods from being trapped
• Optimum soil flow, no ridges during work
H series – Side deflector
2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H
91150C
NG-S
• Depth adjustment moved closer to
the side for better ergonomic and
simpler and safer adjustments
• Design with square pin to reduce
wearing and facilitate changes
• 18 different pin slot for several
working depth adjustments with all
roller types• Reinforced roller arms to improve
stability with heavy rollers and seeders
H series– Depth adjustment
2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H
91150C
NG-S
H series – Technical dataTechnical Data H series
Working width (m) 3,00 3,50 4,00
Transport width (m) 3,00 3,50 4,00
pto - input speed (rpm) 1000
Rotor Speed (rpm) 336 std. (290, 360 and 450 optional)
Minimum hp requirement 80 90 100
Maximum hp allowed 180
Gearbox overload protection 2200 Nm per lateral drive_automatic clutch
Number of rotors 12 14 16
Number of tines 24 28 32
Tine dimension (mm) 15 x 320
Tines fitment Quick fit as standard
Weight with Packer Roller 500mm (kg) 1590 1770 1920
Working depth adjustement Mechanical by pins
2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H
91150C
NG-S
• Infinite adjustable via spindle • Spring loaded to prevent
overload• Strong bracket with 4 bolts• Negative angle for a better soil
flow• Scale for better alignment of
each side
H series – Levelling bar
2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H
91150C
NG-S
• Possibility to fit wide range of roller types due to get optimum performances in all soil conditions
• Tooth packer 575mm (new design), cracker packer, actipack, flexline and cage roller
• Standardised main frame for mounting on all PH range
• New generation of roller bearing maintenance free
H series – Rollers
2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H
91150C
NG-S
H series – Main arguments
• Clear and tidy design but robust and well tested main frame and transmission (40 years experiences)
• Self supporting trough with welded rotor cone – higher rigidity
• Quick Fit tines as a standard• Double conical bearings. 95mm
clearance• Perfect adaptability to all types of
Kverneland seeders• Complete choice of rollers types to get
best performances in all soil conditions• Excellence soil preparation trough
rotors every 25cm and helical tines placements