lab essentials
DESCRIPTION
ÂTRANSCRIPT
www.henryschein.com.au
NEW
Essentials
Laboratory
Orders: 1300 65 88 11
FEB / MARCH 2015
VITA V60 i-Line®
No compromises
Perfect performance
Heavy-duty
Proven quality
Read more on page 3
www.henryschein.com.auOrders: 1300 65 88 11
Orders: 1300 65 88 112
INTRODUCING LABORATORY ESSENTIALS DEAR CUSTOMER,
We are delighted to introduce the first issue of our new ‘Laboratory Essentials’ publication.
In an industry that has contracted drastically over the past few years, it is important that Henry Schein Halas supports laboratories and helps equip you to prosper in a rapidly changing industry. We are investing in new products, lowering prices, more staff and giving our sales team more logical territories to allow them to spend more time helping you in all areas of your business.
We are also changing the ‘look’ of our Laboratory marketing and the publication you are holding in your hands now is the first of many that you will see throughout 2015.
You will find all new and innovative products to perform laboratory work as well as articles and case studies that are relevant for you. We have developed this publication to help guide you through the forever changing marketplace.
This publication is designed for you- our valued customer and we value your feedback and input. Please do not hesitate to contact us with any comments or suggestions you may have. We look forward to hearing from you.
You can also find this publication online: www.henryschein.com.au
The world of the dental laboratory is changing. Let Henry Schein Halas help you.
Yours Sincerely
Ross Phillips
Specialty Business Unit Manager
CONTENTSV60 I-LINE FURNACE ________________________________________________________________________ 3
VITAPAN PLUS ACRYLIC TEETH CASE STUDY _______________________________________________4, 5
PHYSIODENS ACRYLIC TEETH _______________________________________________________________ 6
PROZCARE APPLIANCE CARE _______________________________________________________________ 7
THERMOSENS DENTURES _________________________________________________________________7, 8
VENEERING CERAMIC _______________________________________________________________________ 9
MINISTAR S THERMOFORMING _____________________________________________________________10
BIOPLAST MOUTHGUARD ______________________________________________________________ 10, 11
ZYRCOMAT SINTERING FURNACE _______________________________________________________ 12, 13
K5 PLUS TLC MICROMOTOR ________________________________________________________________13
PUK 2 LASER WELDER _____________________________________________________________________14
FLEXSPACE SINGLE WORKSTATION _________________________________________________________14
MISCELLANEOUS ______________________________________________________________________ 15, 16
GC ____________________________________________________________________________________ 17, 18
CONTACT _________________________________________________________________________________19
EVENTS ___________________________________________________________________________________20
LAB ESSENTIALS
www.henryschein.com.au 3
V60 I-LINEVITA
VITA V60 i-Line® – No compromises,
perfect performance
Heavy-duty proven quality.
VITA continues its successful tradition of building
excellent furnaces customers can rely on with
the V60 i-Line. Representing a new level of
VITA quality, the V60 meets the demands of
international customers for a robust, heavy-
duty furnace perfectly. A state-of-the-art touch
interface and the tried-and-tested VITA quartz
firing muffle guarantee optimal firing results.
The clean, no-frills design make the VITA V60 a
real workhorse, functioning 24/7 under the most
extreme conditions with amazing reliability.
Easy to maintain, easy to handle and made in
Germany, the V60 i-line sets new standards
around the world.
V-DV60I220 V60 i-line Furnace
$ 5,993.90
Buy V60 i-line furnace, Get Vacuum pump at half price!
(V-PU220 $1,315.73 instead of $2,631.45)
PROMO OFFER
Did you Know...Having just returned from technical training from Vita on this product I am amazed at the quality and workmanship. This new furnace is made in Germany. It features most of the components from the premium range but has been designed for ease of use and maintenance.
Our entire team is fully trained to service VITA furnaces.
Peter Burns Specialist Technician
NEW
Orders: 1300 65 88 114
THE AESTHETIC EFFECT OF NEW VITAPAN PLUS DENTURE TEETH
As dental professionals, we know that a tremendous amount of denture teeth are being manufactured in the industry today. How should we go about choosing? If the goal to success is branding the product with quality, then as professionals providing dental health services, it is important to place value first and foremost. Because quality and value will pay off in the long run, we should not, “trip over dollars to pick-up pennies”. Quality cannot be added to a product at the end of fabrication. Quality is produced throughout the fabrication process; one must use the correct materials and apply high standards.
Not just VITAPAN, it is VITAPAN PLUS.
Alice Sager CDT
VITA Zahnfabrik is a German manufacturer of dental products that has built its reputation on exceeding the standard. VITA shade guides and devices are the leading example known around the world. In keeping with a tradition of continual innovation, VITA has now modernized the classical VITAPAN denture tooth and given it a new, future-oriented design. VITAPAN PLUS is the result of VITA’s research with approximately 300 dental professionals in over 10 countries, with the goal of process optimization while at the same time retaining familiar working procedures.
With VITAPAN PLUS, all of the same properties and manufacturing techniques one has come to expect of VITAPAN denture teeth remain: outstanding physical properties, excellent aesthetics, individual shade characterization, and natural appearance. Shade stability even after grinding, minimal moisture absorption and extremely low affinity to plaque, which are a hallmark of the original VITAPAN teeth, are also features retained in the new VITAPAN PLUS teeth.
VITAPAN PLUS anterior denture teeth demonstrate increased anatomic tooth morphology to closely mimic natural teeth for superior phonetics, esthetics and feel. VITAPAN PLUS teeth also feature distinctive curvature (horizontal and vertical) for optimum support of the lip area. Additionally, they provide superior natural shade, light and reflective properties. (Fig; 1, 1a)
(Fig; 1)
(Fig; 1a)
All VITA denture teeth have the MPR (microfiller reinforced polyacrylic) material which is used along with the high quality Repress processing technique to ensure that the three distinct layers, enamel, dentin and neck are uniformly and densely polymerized together. There is no chance for the delaminating or splintering of the layers. Furthermore, the chemical composition of the MRP material results in a high mechanical strength – in the case of both mucosal and implant-borne restorations.
CASE IN POINT
A 52-year-old female patient presented with a complete denture on the maxilla and a partially edentate mandible. Due to constant pain and ongoing problems with the natural dentition the patient was placed into an immediate maxillary denture at the age of 16. Over the course of 38 years she has had only two dentures. The denture that she was most recently wearing had been made for her some 15 years prior to the procedure of fabricating the new prostheses’. Her concerns about the prostheses she was currently wearing were the lack of anterior tooth visibility, little or no lip support, and an upper lip that tended to “roll under’, making it appear as though she did not have an upper lip. The patient also indicated she would like to see wrinkle reduction around the upper lip so lipstick would stay on her lip and not run into the folds of the skin around the lip. Presently she was not, and had not, been wearing any type of appliance on the mandible due to the discomfort and bulk of an old acrylic partial with wrought wire clasping on the natural dentition abutment teeth. Through the clinical expertise of McCade Denture Clinic (Cambridge, Ontario, Canada) and the technical expertise of Belasco Dental Studio (Waterdown, Ontario), the patient received newly fabricated prostheses, creating a naturally aesthetic smile utilizing the new VITAPAN PLUS anterior denture teeth and VITA PHYSODENS posterior teeth.
Upon initial evaluation it was determined that the patient needed a new maxillary denture and a thermal plastic partial to replace the missing dentition on the mandible. This in turn would allow for a more suitable posterior occlusal scheme, achieving an uncompromised occlusion and adding overall benefit to the patient’s ability to function correctly.
CASE STUDY
LAB ESSENTIALS
www.henryschein.com.au 5
Summary:
In conclusion, it is important for dental professionals to bear in mind that the final outcome of removable prosthetics must equally satisfy the patient’s esthetic and functional requirements. Everyone in the dental profession involved in fabricating or delivering removable prosthetics will hopefully take into consideration the higher quality material is always the better choice. We should be thinking in terms of highest value, not lowest price. It is the author’s belief that VITAPAN PLUS anterior denture teeth meet the demand for function and esthetics in a very affordable manner and are perfectly suited for all midrange denture needs.
VITAPAN PLUS anterior teeth are available in a compact assortment of ten VITA 3D-Master shades and ten VITA Classical shades. The mould numbering system has been uniquely designed to be user-friendly for quick and accurate selection of the anterior maxilla and mandible teeth. There are 10 maxillary moulds and 5 mandibular moulds technically designed to be interchangeable with several of the maxillary moulds. This reduces the volume of stock necessary to accommodate the variety of maxillary inventory needed for specific aesthetic considerations based on size and facial features.
Source: ZMK Issue 03/12, Germany
VITA Zahnfabrik H. Rauter GmbH & Co. KG
Headquartered in Bad Säckingen/Germany, VITA Zahnfabrik H. Rauter GmbH & Co. KG has been developing, producing and marketing innovative solutions for dental prosthetics according to consistently high quality standards for over 85 years, and has been known from the very beginning as a pioneer and worldwide trendsetter. The VITA shade standard, for instance, is recognised internationally in the dental branch as a shade reference system. Users in 120 different countries benefit from the comprehensive range of products and services provided by VITA Zahnfabrik. These include analogue and digital tooth shade determination systems, acrylic and ceramic teeth, veneering and framework materials for conventional and computer-aided manufacturing procedures, dental equipment as well as a wide range of service and training facilities.
(Fig; 2) (Fig; 2a)
The patient’s final comment: “My God they’re Gorgeous! They look so natural.”
Orders: 1300 65 88 116
PHYSIODENSVITA
VITAPAN PLUSVITA
Premium Denture Teeth – Now in Classical Shades
Multi-dimensional layering technique and nature-identical surface morphology.
The result is a harmonious play of colours rich in nuances and natural light reflection behaviour.
Amazing corporeal moulds
Ensures a true-to-nature restoration for partial dentures– particularly in the case of implant restorations. Anatomically moulded palatal ridges and the convex labial facet design enhance the restoration of the chewing function, the phonetics and the natural lip contour.
Specifically designed interdental ridges.
For a lifelike and age-specific design of the papillae. Esthetic aspects as well as optimum function and hygiene – key aspects particularly in gerontoprosthetics – have been given exemplary consideration.
Unique products of craftsmanship
manually layered in a multi-layer technique.
a unique masterpiece in nature-identical shade, mould and function.
a successful symbiosis of “handcrafted in Germany” and ground breaking high-tech.
Optimum interior. Perfect exterior
VITAPAN PLUS is ideal for use in a prosthetic restoration.
It has an amazingly natural, lifelike appearance as it reproduces the individual contour formed by the progression of the incisal edges, the curvature and angle characteristic and the labial surface structure of a natural tooth.
Good closure of the interdental spaces
Suitable for a natural papilla design
Enables easy denture care that is easy on the prosthesis.
Its anatomical palatal design facilitates anterior guidance and helps improve the patient‘s phonetics in situ.
Vitapan Plus Anterior
From
$ 43.95
Buy 20 Cards get Prozcare Denture Care Kits FREE! (pkt of 12, worth $328.96)
PROMO OFFER
Buy 30 Cards get Prozcare Denture Care Kits FREE! (pkt of 12, worth $328.96)
PROMO OFFER
Physiodens From
$ 38.45
LAB ESSENTIALS
www.henryschein.com.au 7
DENTAL APPLIANCE CAREPROZCARE
THERMOSENSVERTEX
Monomer-free, rigid, C&B, full and partial dentures Monomer-free
Vertex™ ThermoSens is ideally suited to patients unwilling or unable to accept dentures made from materials that could result in allergic reactions or other sensitivity problems.
Virtually no shrinkage: excellent fit
Created from a unique thermoplastic material, Vertex™ ThermoSens also offers a number of other important advantages. It is virtually unbreakable, and provides an excellent fit due to the lack of volume shrinkage.
Suitable for
full and partial dentures, Overdenture on implants - virtually unbreakable
the ideal solution in limited spaces, Optimized fit of locators
Add Value with Premium Appliance Care
Prozcare Kit has been professionally designed to help your patients maintain and store dental appliances. To assist them with the care of appliances, the contents include a soft bristle Prozcare brush, paste, cloth, mirror.
Prozcare Paste is organically certified. There are no harsh abrasives contained within the paste.
It is recommended for both fixed and removable appliances and ensures a as-new appearance.
Prozcare Kit (Pkt 12)
$ 328.96
Thermosens Cartridges (pkt 12) From
$ 186.95
Orders: 1300 65 88 118
THERMOSENS IS SETTING A NEW BENCHMARK IN FLEXIBLE DENTURES
BORIS TINONE, CDT, Dental Technician
This is Vertex‘s view of their thermoplastic denture base material. Let‘s have a look at this fantastic material and see why this materi-al is so positively different to the traditional nylon materials such as Valpast, Flexite, TCS, FRS etc.
Thermoplastic (melt when heated and harden when cooled) materials are not new to dentistry, in fact they were developed as far back as 1953 only sixteen years after heat curing acrylic was developed.
The possible reasons why nylons never became as popular as acrylic did is due to the technical difficulties when working with them, their relatively high (5-7%) contraction rate and the high costs of initial set up.
ThermoSens has overcome many of these difficulties by de-veloping an easy to use system that is rather economical for the laboratory to set up. Vertex has also reduced the contraction rate to about 1% and added crystalline filling materials which makes ThermoSens very easy to polish to a high lustre and making it resistant to water absorption and unsightly staining.
It is well documented that when designing a partial denture, that the major connectors be ridged. The traditional nylon materials tend to be too flexible causing movement during mastication. This movement transmits forces onto the edentulous saddles causing trauma and increasing bone resorption, furthermore the retentive clasps or wings can also move causing the gingiva to be forced away from the tooth, hence the term „Gum Stripper“ has become synonymous.
ThermoSens is far more ridged and allows for construction of a major connector that is not flexible thus overcoming the above mentioned shortfalls. Retention is achieved by engaging mesial and distal undercuts of abutment teeth but large unsightly wings or clasps are not needed. The beauty of this material is that the technician can reduce the thickness in order to achieve more flexibility and thicken to create a ridged area. This versatile material can be used in any situation, weather it be a partial denture (Every Design), full denture, framed type partial (in place of a metal frame) or a Nesbit Denture replacing one or two teeth.
Other advantages of this material are it‘s toughness, it‘s very appealing aesthetics, it‘s retentive ability without the use of clasps, it‘s versatility and the reasonable initial set up costs. Patients have reported to me on the comfort and that they generally like the fact that due to it‘s strength the denture can be made much thinner than acrylic.
Boris Tinone was born in Italy and raised in South Africa. He attended WITS [University of Witwatersrand]. Boris qualified as dental technician in 1986 and attended compulsory military service at No1 Military Hospital Dental Lab. In 1989 Boris got married and soon after went to Europe where he opened his first dental laboratory. In 1999 Boris and his family immigrated to NZ where he once again set his own laboratory (Dental Plus). In 2008 Boris attended a post graduate diploma in Clinical Dental Technology.
VIRTUALLY UNBREAKABLE
Call us on 0800 764 537 to receive a FREE SAMPLE!
CLINICAL
The ideal solution in limited spacesSuitable for full and partial dentures State-of-the-art aesthetic solutions
ThermoSens is setting a new benchmark in flexible dentures.This is Vertex's view of their thermoplastic denture base material. Let's have a look at this fantastic material and see why this material is so positively different to the traditional nylon materials such as Valpast, Flexite, TCS, FRS etc. Thermoplastic (melt when heated and harden when cooled) materials are not new to dentistry, in fact they were developed as far back as 1953 only sixteen years after heat curing acrylic was developed.
The possible reasons why nylons never became as popular as acrylic did is due to the technical difficulties when working with them, their relatively high (5-7%) contraction rate and the high costs of initial set up.
ThermoSens has overcome many of these difficulties by developing an easy to use system that is rather economical for the laboratory to set up. Vertex has also reduced the contraction rate to about 1% and added crystalline filling materials which makes ThermoSens very easy to polish to a high lustre and making it resistant to water absorption and unsightly staining.
It is well documented that when designing a partial denture, that the major connectors be ridged. The traditional nylon materials tend to be too flexible causing movement during mastication. This movement transmits forces onto the edentulous saddles causing trauma and increasing bone resorption, furthermore the retentive clasps or wings can also move causing the gingiva to be forced away from the tooth, hence the term "Gum Stripper" has become synonymous.
ThermoSens is far more ridged and allows for construction of a major connector that is not flexible thus overcoming the above mentioned shortfalls. Retention is achieved by engaging mesial and distal undercuts of abutment teeth but large unsightly wings or clasps are not needed. The beauty of this material is that the technician can reduce the thickness in order to achieve more flexibility and thicken to create a ridged area.
This versatile material can be used in any situation, weather it be a partial denture (Every Design), full denture, framed type partial (in place of a metal frame) or a Nesbit Denture replacing one or two teeth.
Other advantages of this material are it's toughness, it's very appealing aesthetics, it's retentive ability without the use of clasps, it's versatility and the reasonable initial set up costs. Patients have reported to me on the comfort and that they generally like the fact that due to it's strength the denture can be made much thinner than acrylic.
BORIS TINONECDT, Dental Technician
Boris Tinone was born in Italy and raised in South Africa. He attended WITS [University of Witwatersrand]. Boris qualifi ed as dental technician in 1986 and attended compulsory military service at No1 Military Hospital Dental Lab. In 1989 Boris got married and soon aft er went to Europe where he opened his fi rst dental laboratory. In 1999 Boris and his family immigrated to NZ where he once again set his own laboratory [Dental Plus]. In 2008 Boris attended a post graduate diploma in Clinical Dental Technology.
Lab
ora
tory
3
8
All prices are exclusive of GST and freight. To order fax 0508 808 555, available 24 hours
VIRTUALLY UNBREAKABLE
Call us on 0800 764 537 to receive a FREE SAMPLE!
CLINICAL
The ideal solution in limited spacesSuitable for full and partial dentures State-of-the-art aesthetic solutions
ThermoSens is setting a new benchmark in flexible dentures.This is Vertex's view of their thermoplastic denture base material. Let's have a look at this fantastic material and see why this material is so positively different to the traditional nylon materials such as Valpast, Flexite, TCS, FRS etc. Thermoplastic (melt when heated and harden when cooled) materials are not new to dentistry, in fact they were developed as far back as 1953 only sixteen years after heat curing acrylic was developed.
The possible reasons why nylons never became as popular as acrylic did is due to the technical difficulties when working with them, their relatively high (5-7%) contraction rate and the high costs of initial set up.
ThermoSens has overcome many of these difficulties by developing an easy to use system that is rather economical for the laboratory to set up. Vertex has also reduced the contraction rate to about 1% and added crystalline filling materials which makes ThermoSens very easy to polish to a high lustre and making it resistant to water absorption and unsightly staining.
It is well documented that when designing a partial denture, that the major connectors be ridged. The traditional nylon materials tend to be too flexible causing movement during mastication. This movement transmits forces onto the edentulous saddles causing trauma and increasing bone resorption, furthermore the retentive clasps or wings can also move causing the gingiva to be forced away from the tooth, hence the term "Gum Stripper" has become synonymous.
ThermoSens is far more ridged and allows for construction of a major connector that is not flexible thus overcoming the above mentioned shortfalls. Retention is achieved by engaging mesial and distal undercuts of abutment teeth but large unsightly wings or clasps are not needed. The beauty of this material is that the technician can reduce the thickness in order to achieve more flexibility and thicken to create a ridged area.
This versatile material can be used in any situation, weather it be a partial denture (Every Design), full denture, framed type partial (in place of a metal frame) or a Nesbit Denture replacing one or two teeth.
Other advantages of this material are it's toughness, it's very appealing aesthetics, it's retentive ability without the use of clasps, it's versatility and the reasonable initial set up costs. Patients have reported to me on the comfort and that they generally like the fact that due to it's strength the denture can be made much thinner than acrylic.
BORIS TINONECDT, Dental Technician
Boris Tinone was born in Italy and raised in South Africa. He attended WITS [University of Witwatersrand]. Boris qualifi ed as dental technician in 1986 and attended compulsory military service at No1 Military Hospital Dental Lab. In 1989 Boris got married and soon aft er went to Europe where he opened his fi rst dental laboratory. In 1999 Boris and his family immigrated to NZ where he once again set his own laboratory [Dental Plus]. In 2008 Boris attended a post graduate diploma in Clinical Dental Technology.
Lab
ora
tory
3
8
All prices are exclusive of GST and freight. To order fax 0508 808 555, available 24 hours
VIRTUALLYUNBREAKABLE
CASE STUDY
LAB ESSENTIALS
www.henryschein.com.au 9
VENEERING CERAMIC VITA
VM9: Natural fine-structure feldspar veneering ceramic for zirconium dioxide substructures
VITA VM 9 was specially designed as a high-fusing, fine-structure feldspar ceramic for ZrO2 substructures partially stabilized with yttrium in the CTE range of approx. 10.5 (e.g. VITA In-Ceram YZ).
The CTE is precisely adjusted to zirconium dioxide materials, which guarantees optimum bonding and absolutely reliable results.
In addition to this, VITA VM 9 is ideally suited for individualizing:
Vitablocs and Vita PM9
VM11: Fine-structure ceramic for individualizing of VITA SUPRINITY
VITA VM 11 is a low-melting fine-structure feldspar ceramic that has been developed especially for individualizing crown substructures made of zirconia reinforced lithium silicate ceramic (ZLS).
Due to its individual CTE, a separate veneering material is required for this new generation glass ceramic. The perfectly matched CTE values of substructure and veneering materials help minimize stress to ensure superior bonding and veneering reliability that is free of warping.
VM13: For veneering metal substructures in the conventional CTE range
VITA VM13 was developed as a feldspar veneering ceramic for alloys in the conventional CTE range of approx. 13.8 – 15.2.
The CTE range and the firing temperature of VITA VM 13 are perfectly matched with high gold content, reduced gold content, palladium-based and non-precious metal alloys.
With the firing temperatures of VITA VM 13 distortion of the alloy can be virtually ruled out.
*Mix and match possible, Free item must be of equal or lesser value than the purchased item.
Buy 3, Trade 2, Get 1 FREE!Buy any 3 bottles of porcelain, Trade-in any 2 partially used bottles of porcelain, Get 1 bottle FREE!*
TRADE-IN OFFER
Orders: 1300 65 88 1110
MINISTAR SSCHEU DENTAL
BIOPLAST MOUTHGUARD MATERIAL SCHEU DENTAL
S-3500
Ministar S
$ 4,180
Bioplast Multicolour
$ 12.70 each
New Generation Pressure Moulding- With Barcode Scanner
Operating temperature is reached within one second and the foil can be heated immediately.
All operating parameters can be programmed and controlled. Large display ensures overview of all important information.
Foils are heated on the side facing the model during pressure moulding
Ergonomically designed granulate container allows controlled and precise investment
Modern scanner technology captures all necessary parameters like temperature, heating and cooling time.
3 year warranty
Free demonstration*
Gear Up For Mouthguard SeasonA large number of sports accidents include injuries to the teeth and the periodontium – in both recreational and professional sports.
SCHEU-DENTAL offers the suitable mouth guard for any application
proven, two-layer mouth guard for high protection and comfort
for all recreational sports
various colours available to suit most Australian sports team colours
Buy Ministar S, Get Material Starter Kit worth $955 FREE!
PROMO OFFER
$12.70 each or Buy 10 for $102
PROMO OFFER
Trade in your old Thermoforming Machine and get $1,000 discount on your Ministar S
TRADE-IN OFFER
* For availablily, please check with your local Territory Manager
** Mix and Match any colours
OR
LAB ESSENTIALS
www.henryschein.com.au 11
THE EVOLUTION CONTINUES.
November 2014 saw the conducting of a series of seminars across most of Australia and keeping in line with their theme we were blown away.
Even with an absolutely positive attitude on our part we were overwhelmed with the response. A good salesman doesn’t like turning customers away but we had no choice but to do so as the Q&A format and the venues meant we could not cater for more than 30 participants at each seminar and every event was oversubscribed. So great was the response we had people from Melbourne flying to Sydney and Perth and people from Sydney to Melbourne.
So what was it all about? Matthias Schwartze from Scheu Dental in Germany was here again and he was bringing the message;
Suck-down (the Screamer) is dead!
Pressure Moulding (the Quiet Achiever) is the way to go!
10 Seminars with over 300 registrations and long wait-lists in each state proved the demand is out there for a better way to Thermoform Dental Appliances. Not just bleaching stents and skinny mouthguards.
As a direct result of the seminars many customers converted to the Scheu Ministar S and are now producing:- Special Trays, indirect Bracket Placement, Bruxers Splints, Ortho Retainers with or without wires, Temporary Dentures, Fracture Splints, Surgical Guides, Implant Guides, Model Duplication, Temporary Crowns, truly effective Mouthguards for professional sports and Laminating that bonds permanently, the list goes on and on
Unsolicited comments of “When will you be back”, “We’ve needed this seminar for so long”, “I learned so much”, “Now I know what I was doing wrong” proving the popularity of these events.
Owing to the popularity of the Scheu Seminars and the requests of the participants 2015, Q4 will see the return of Matthias the Messiah but before then we will be looking at other Scheu initiatives such as Sleep Medicine and other Orthodontic orientated products.
ARTICLE
Orders: 1300 65 88 1112
41 L
abo
ratory
To order phone 0800 808 855, between 8.00am and 5.30pm www.henryschein.co.nz
VITA ZYRCOMAT6000 MS
Choose VITA dental furnaces and realisesavings on every firing procedure.
VITA shade, VITA made.
VITA Energy EfficiencyEconomy and ecology in harmony
*1 Comparison between VITA VACUMAT 4000 PREMIUM T and VITA VACUMAT 6000 M, Measurement results for one hour of operation.
*2 Comparison between VITA ZYRCOMAT and VITA ZYRCOMAT6000 MS, Measurement results for one program run.
All measurement results were obtained by VITA Research & Development and tested by TÜV Austria.
Energy consumption in %Previous modelCurrent model
Furnace standby *1 Sintering units universal sintering *2
www.vita-new-generation.com
This is why the economical and resource conscious utilisation of energy is an increasingly important decision-making criterion with regard to investing in new equipment.
Savings in energy consumption is often made possible by technological innovations. Thanks to high-quality, energy-efficient material combinations, the VITA dental firing technology combines optimum product quality and performance with the certified VITA Energy Efficiency strategy.
VITA Energy Efficiency offers you the following benefits for switchingnow to the latest generation of VITA dental firing units:
• Reduce your energy costs by up to 70% compared to previousVITA models.
• Opt for the outstandingly long-lasting and energy-efficientmaterials of the VITA dental furnaces.
• You can benefit from further optimisation measures as a consequence of the on-going research in the VITA Energy Efficiency sector.
VITA VACUMAT6000 M
Productive economic strategies and responsible resourcemanagement are not mutually exclusive, but go hand in hand.
41 L
abo
ratory
To order phone 0800 808 855, between 8.00am and 5.30pm www.henryschein.co.nz
VITA ENERGY EFFICIENCYECONOMY AND ECOLOGY IN HARMONY
Choose VITA dental furnaces and realise savings on every firing procedure.
VITA Energy Efficiency offers you the following benefits for switching now to the latest generation of VITA dental firing units:
Reduce your energy costs by up to 70% compared to previous VITA models.
Opt for the outstandingly long-lasting and energy-efficient materials of the VITA dental furnaces.
You can benefit from further optimisation measures as a consequence of the on-going research in the VITA Energy Efficiency sector.
Productive economic strategies and responsible resource management are not mutually exclusive, but go hand in hand.
This is why the economical and resource conscious utilisation of energy is an increasingly important decision-making criterion with regard to investing in new equipment.
Savings in energy consumption is often made possible by technological innovations. Thanks to high-quality, energy-efficient material combinations, the VITA dental firing technology combines optimum product quality and performance with the certified VITA Energy Efficiency strategy.
*1 Comparison between VITA VACUMAT 4000 PREMIUM T and
VITA VACUMAT 6000 M, Measurement results for one hour of
operation.
*2 Comparison between VITA ZYRCOMAT and VITA ZYRCOMAT
6000 MS, Measurement results for one program run.
All measurement results were obtained by VITA Research &
Development and tested by TÜV Austria.
VITA ZYRCOMAT6000 MS
Choose VITA dental furnaces and realisesavings on every firing procedure.
VITA shade, VITA made.
VITA Energy EfficiencyEconomy and ecology in harmony
*1 Comparison between VITA VACUMAT 4000 PREMIUM T and VITA VACUMAT 6000 M, Measurement results for one hour of operation.
*2 Comparison between VITA ZYRCOMAT and VITA ZYRCOMAT6000 MS, Measurement results for one program run.
All measurement results were obtained by VITA Research & Development and tested by TÜV Austria.
Energy consumption in %Previous modelCurrent model
Furnace standby *1 Sintering units universal sintering *2
www.vita-new-generation.com
This is why the economical and resource conscious utilisation of energy is an increasingly important decision-making criterion with regard to investing in new equipment.
Savings in energy consumption is often made possible by technological innovations. Thanks to high-quality, energy-efficient material combinations, the VITA dental firing technology combines optimum product quality and performance with the certified VITA Energy Efficiency strategy.
VITA Energy Efficiency offers you the following benefits for switchingnow to the latest generation of VITA dental firing units:
• Reduce your energy costs by up to 70% compared to previousVITA models.
• Opt for the outstandingly long-lasting and energy-efficientmaterials of the VITA dental furnaces.
• You can benefit from further optimisation measures as a consequence of the on-going research in the VITA Energy Efficiency sector.
VITA VACUMAT6000 M
Productive economic strategies and responsible resourcemanagement are not mutually exclusive, but go hand in hand.
41 L
abo
ratory
To order phone 0800 808 855, between 8.00am and 5.30pm www.henryschein.co.nz
VITA ZYRCOMAT6000 MS
Choose VITA dental furnaces and realisesavings on every firing procedure.
VITA shade, VITA made.
VITA Energy EfficiencyEconomy and ecology in harmony
*1 Comparison between VITA VACUMAT 4000 PREMIUM T and VITA VACUMAT 6000 M, Measurement results for one hour of operation.
*2 Comparison between VITA ZYRCOMAT and VITA ZYRCOMAT6000 MS, Measurement results for one program run.
All measurement results were obtained by VITA Research & Development and tested by TÜV Austria.
Energy consumption in %Previous modelCurrent model
Furnace standby *1 Sintering units universal sintering *2
www.vita-new-generation.com
This is why the economical and resource conscious utilisation of energy is an increasingly important decision-making criterion with regard to investing in new equipment.
Savings in energy consumption is often made possible by technological innovations. Thanks to high-quality, energy-efficient material combinations, the VITA dental firing technology combines optimum product quality and performance with the certified VITA Energy Efficiency strategy.
VITA Energy Efficiency offers you the following benefits for switchingnow to the latest generation of VITA dental firing units:
• Reduce your energy costs by up to 70% compared to previousVITA models.
• Opt for the outstandingly long-lasting and energy-efficientmaterials of the VITA dental furnaces.
• You can benefit from further optimisation measures as a consequence of the on-going research in the VITA Energy Efficiency sector.
VITA VACUMAT6000 M
Productive economic strategies and responsible resourcemanagement are not mutually exclusive, but go hand in hand.
41 L
abo
ratory
To order phone 0800 808 855, between 8.00am and 5.30pm www.henryschein.co.nz
VITA ZYRCOMAT6000 MS
Choose VITA dental furnaces and realisesavings on every firing procedure.
VITA shade, VITA made.
VITA Energy EfficiencyEconomy and ecology in harmony
*1 Comparison between VITA VACUMAT 4000 PREMIUM T and VITA VACUMAT 6000 M, Measurement results for one hour of operation.
*2 Comparison between VITA ZYRCOMAT and VITA ZYRCOMAT6000 MS, Measurement results for one program run.
All measurement results were obtained by VITA Research & Development and tested by TÜV Austria.
Energy consumption in %Previous modelCurrent model
Furnace standby *1 Sintering units universal sintering *2
www.vita-new-generation.com
This is why the economical and resource conscious utilisation of energy is an increasingly important decision-making criterion with regard to investing in new equipment.
Savings in energy consumption is often made possible by technological innovations. Thanks to high-quality, energy-efficient material combinations, the VITA dental firing technology combines optimum product quality and performance with the certified VITA Energy Efficiency strategy.
VITA Energy Efficiency offers you the following benefits for switchingnow to the latest generation of VITA dental firing units:
• Reduce your energy costs by up to 70% compared to previousVITA models.
• Opt for the outstandingly long-lasting and energy-efficientmaterials of the VITA dental furnaces.
• You can benefit from further optimisation measures as a consequence of the on-going research in the VITA Energy Efficiency sector.
VITA VACUMAT6000 M
Productive economic strategies and responsible resourcemanagement are not mutually exclusive, but go hand in hand.
41 L
abo
ratory
To order phone 0800 808 855, between 8.00am and 5.30pm www.henryschein.co.nz
FEATURE:
LAB ESSENTIALS
www.henryschein.com.au 13
ZYRCOMAT SINTERING FURNACEVITA
Experience High-Speed Sintering- Now even faster
Accelerate your income and sinter up to 9-unit bridges in 80 minutes using the VITA ZYRCOMAT 6000 MS. The firing unit is designed for high-temperature sintering of all dental ceramic substructure materials. Whether High Speed, conventional or user-defined sintering – the choice is yours.
Offer your customers the Smile in One Day service and extend your firing system with the unique option of operating several firing, sintering and combined pressing units simultaneously.
That‘s the way we do our firing today – and tomorrow!
V-ZYRCOMAT6000
Zyrcomat Firing Unit Only
$ 24,027.45
K5 PLUS TLC MICROMOTORKAVO
The Compact All-Rounder
Ball bearing with patented, dirt-repellent sealing system for maximum stability
Ball bearing is easy and quick to change for ease of servicing
Proven rapid-clamping system for maximum reliability
Robust patented one-shaft system for long service life and less vibration
The functions of the KaVo K-K5plus can be controlled either directly on the central tabletop unit or via a connected knee or foot control unit.
The automatic handpiece recognition allows handpieces to be exchanged flexibly.
KV-1-009-42_
Bench, Knee or foot control
$ 4,436.30
Orders: 1300 65 88 1114
PUK D2 LASER WELDER LP-D2330200
$ 6,594.95
FLEXSPACE SINGLE WORKSTATIONKAVO
Sets new standards in terms of individuality, value for money and speed
Design your own Laboratory furniture
With variable height, wood details and a delightful colour choice
The modular concept makes it easy for you to select the perfect fit.
KV-1.003.6375
$ 13,788.91
PUK D2 LASER WELDERLAMPERT
Dental Precision
Welding microscope
10x magnification, LED lighting provides optimum illumination of the working area, Perfect ergonomics – variable angle of inclination and comfortable hand rests
Welding handpiece
High precision instrument manufactured to the highest standards
Operating concept and welding performance
Extremely simple touchscreen operation, Select metal - select welding situation - weld!
Easily review the optimum setting ranges for the selected welding task, Pin welding function for time-saving welding of retentions, Fastening mode for rapid tack welding
*Pricing is indicative. The final price will depend on your individual choice of modules. This item is indend and will be especially orderred for you
LAB ESSENTIALS
www.henryschein.com.au 15
ARTI-SPRAY BAUSCH
YELLOW STONE AINSWORTH
SAVE 15%
A universal color indicator to test the occlusal contacts and accurate fit of crowns and bridges.
Is easy to handle and leaves a thin coloured film which can easily be removed with water, leaving no trace of residues. Apply at a distance of 3-5 cm onto the occlusal surface or inside the bridge or crown. When testing occlusion or trial seating the bridge or crown, all contact points will be immediately visible. Can also be used for approximal contacts when trial seating crowns and bridges
Extra Hard, premium dental stone
Super-smooth pouring, excellent hardness and a very low setting expansion make this the ideal dental stone for most laboratory processing tasks
Sets to a smooth, shiny surface and offers minimal splintering when grinding
With these physical properties, no wonder it is Australia’s favourite dental stone!
75ml Can
$ 41.60
20kg Pail
$ 100.05
20kg Bag
$ 93.45
5kg Pail
$ 37.35
Orders: 1300 65 88 1116
WL SERIES ALPRO
SONTARA MEDICLEAN MAJAC
CLINIDET MAJAC
Clinic Pack 4 x 500ml Spray
$ 199
35 x 30cm
$ 14.36
35 x 60cm
$ 26.50
Cleaning and disinfection products for the treatment of handpieces, contra-angles and turbines
WL-Clean
All purpose rinsing and cleaning solution ready to use, free of Aldehydes and Alcohol.
For the no protein fixing inner cleaning and decontamination of hollow part instruments, e.g Turbines, Contra-angles, hand pieces, internally cooled instruments.
MA
JA
C MEDICAL
PRODUCTS
Low Lint Performance
Soft and highly absorbent soaking up to 7 times its own weight in fluids
Superior dry and wet strengths, steam stable Individual towels will not separate into layers
Large enough to use double thickness
The All Purpose Clinical Detergent
Environmentally Friendly, User Friendly, Worksafe Friendly
Excellent detergency with rapid wetting
Very low foaming under dynamic conditions
Corrosion inhibitor incorporated into the solution.
15L $ 94
5L $ 34.60
500ml Office dispenser $ 6SAVE 10%
MA
JA
C MEDICAL
PRODUCTS
LAB ESSENTIALS
www.henryschein.com.au 17
FIT CHECKER ADVANCED GC
A Vinyl PolyEther Silicone for simple and precise checking and adjustment of all prosthetic work.
Fit Checker™ Advanced White offers
• Ideal consistency for easy flow onto dentures and
oral tissues with excellent wettability against saliva
coated surfaces
• Sufficient working time (up to 1’00”)
• Rapid setting time (1’00” in the mouth)
• A perfect colour gradation for clear and precise
visualisation of poorly fitting areas
• Easy adjustments - the set material does not get
caught by the bur while relieving pressure spots.
• Easy to peel off ensuring a fast, clean procedure.
Fit Checker™ Advanced WhiteThe ideal colour for acrylic and metal• Fit Checker™ Advanced White offers ideal consistency and high wettability for easy flow onto
dentures and oral tissues, now even easier to use in automix.
• Perfect for all kinds of prosthetic work such as dentures and metal-based crowns and bridges.
• Fit Checker™ Advanced White is not affected by saliva.
Apply and seat Check and adjust Ideal for metal crowns and bridges
What is Fit Checker™?A Vinyl PolyEther Silicone
for simple and precise
checking and adjustment
of all prosthetic work.
Snap setSufficient working time and
rapid setting time (W/T 1
minute, S/T 1 minute in mouth).
Clear and precise visualisationA perfect colour gradation
for immediate visualisation of
occlusal contacts and poorly
fitting areas.
Fit Checker™ Advanced White
Cartridges (2 x 62 g)
White + mixing tips IIS (3) and IISS (3)
$ 118.50
Also available Fit Checker™ Advanced Blue
The ideal colour for all ceramic
1-1 Pack (55 g + 50 g),
White + retarder (3g) + accessories
$ 112.60
Available in a choice of hand mix or automix
NEWFit Checker™
Fit Checker™ Advanced BlueThe ideal colour for all ceramic – adjust the right spots that are causing the problems instead of guessing. • Perfect for checking the fit for all kinds of ceramic work especially resin, ceramic and zirconia.
• Can be used for bite registration and evaluation of occlusal contacts as well as checking the fit of splints.
Finally, it’s possible to make certain of a perfect fit for indirect restorations, avoiding marginal gaps and major occlusal adjustments after cementation.
Check and adjustSeat Bite registration
Easy to peel offThe Vinyl Polyether silicone
peels off easily for a clean
and fast procedure.
No mess during adjustmentsThe set material does not
get caught by the bur while
relieving pressure spots.
Now available in automix
Fit Checker™
Fit Checker™ Advanced BlueThe ideal colour for all ceramic – adjust the right spots that are causing the problems instead of guessing. • Perfect for checking the fit for all kinds of ceramic work especially resin, ceramic and zirconia.
• Can be used for bite registration and evaluation of occlusal contacts as well as checking the fit of splints.
Finally, it’s possible to make certain of a perfect fit for indirect restorations, avoiding marginal gaps and major occlusal adjustments after cementation.
Check and adjustSeat Bite registration
Easy to peel offThe Vinyl Polyether silicone
peels off easily for a clean
and fast procedure.
No mess during adjustmentsThe set material does not
get caught by the bur while
relieving pressure spots.
Now available in automix
Fit Checker™
Fit Checker™ Advanced BlueThe ideal colour for all ceramic – adjust the right spots that are causing the problems instead of guessing. • Perfect for checking the fit for all kinds of ceramic work especially resin, ceramic and zirconia.
• Can be used for bite registration and evaluation of occlusal contacts as well as checking the fit of splints.
Finally, it’s possible to make certain of a perfect fit for indirect restorations, avoiding marginal gaps and major occlusal adjustments after cementation.
Check and adjustSeat Bite registration
Easy to peel offThe Vinyl Polyether silicone
peels off easily for a clean
and fast procedure.
No mess during adjustmentsThe set material does not
get caught by the bur while
relieving pressure spots.
Now available in automix
Orders: 1300 65 88 1118
INITIAL IQ LUSTRE PASTEGC
3 dimensional ceramic stain and glaze system that brings exceptional aesthetics and vitality to a full range of ceramic materials.
Lustre Paste NF is formulated from low fusing porcelain and designed for speed, strength and simplicity:
• Wide CTE range – between 6.9 and 13.3 – works with virtually all types of ceramic materials
• What you see before firing is exactly what you get after firing
• Beautiful results with just one glaze fire - big time savings
• Highly wear resistant
• Thixotropic properties mean easy and precise application
• Available in a full range of shades
4 LP Value, L-V, L-3, L-A
GC Initial IQ – Lustre Pastes NF Diluting Liquid
The Diluting Liquid is a special liquid to offer the desired paste-like consistency for the application.
GC Initial IQ – Lustre Pastes NF Refreshing Liquid
The Refreshing Liquid is used to preserve the thixotropic property of the pastes. This liquid is used to recover dried out pastes to an optimum, gel-like consistency without changing the physical properties.
1 Basis 2 LP L-N Neutral
Brightness, L-V Value Grey Value, L-3 Light GreyColour, L-A Body
3 Making modifications
With Lustre Pastes NF you can easily modify your conventional ceramic crown and bridgework. Changing the brightness, value and colour has never been so easy!
GC Initial IQ
4 LP Value, L-V, L-3, L-A
GC Initial IQ – Lustre Pastes NF Diluting Liquid
The Diluting Liquid is a special liquid to offer the desired paste-like consistency for the application.
GC Initial IQ – Lustre Pastes NF Refreshing Liquid
The Refreshing Liquid is used to preserve the thixotropic property of the pastes. This liquid is used to recover dried out pastes to an optimum, gel-like consistency without changing the physical properties.
1 Basis 2 LP L-N Neutral
Brightness, L-V Value Grey Value, L-3 Light GreyColour, L-A Body
3 Making modifications
With Lustre Pastes NF you can easily modify your conventional ceramic crown and bridgework. Changing the brightness, value and colour has never been so easy!
GC Initial IQ
One system – two approaches
BasicFor Vita® Classic Shade in 2 minutes
Basic colours: the easiest way to achieve a Vitapan® Classic restoration
AdvancedFor the highest aesthetic results
Advanced colours: open up your artistic side
Individualise your crown and bridgework by painting on white spots, decalcifications, hair lines and crack lines. You can even use GC Initial Lustre Pastes NF to characterise artificial porcelain teeth.
These colours ensure the look of natural teeth due to their high fluorescence.
L-N Neutral L-A Body
L-B Body L-C Body L-D Body
L-5 Light Blue
L-1 Vanilla L-2 White
L-3 Light Grey L-4 Dark Grey
L-6 Dark Blue L-7 Incisio L-8 Olive L-V Value
One system – two approaches
BasicFor Vita® Classic Shade in 2 minutes
Basic colours: the easiest way to achieve a Vitapan® Classic restoration
AdvancedFor the highest aesthetic results
Advanced colours: open up your artistic side
Individualise your crown and bridgework by painting on white spots, decalcifications, hair lines and crack lines. You can even use GC Initial Lustre Pastes NF to characterise artificial porcelain teeth.
These colours ensure the look of natural teeth due to their high fluorescence.
L-N Neutral L-A Body
L-B Body L-C Body L-D Body
L-5 Light Blue
L-1 Vanilla L-2 White
L-3 Light Grey L-4 Dark Grey
L-6 Dark Blue L-7 Incisio L-8 Olive L-V Value
Basic
For Vita® Classic Shade in 2 minutes
Basic colours: the easiest way to achieve a
Vitapan® Classic restoration
Advanced
For the highest aesthetic results
Advanced colours: open up your artistic side.
These colours ensure the look of natural teeth due to their high fluorescence.
Kit*
$ 679
Refill 4g
$ 68.80
*Kit includes: 1 x Neutral (4g), 1x Value (4g), 4x Body Shades (4g – A, B, C, D), 8x Enamel effect shades (4g – Vanilla, White, Light Grey, Dark Grey, Light Blue, Dark Blue, Incisio, Olive), 1x Diluting Liquid (8ml), 1x Refreshing Liquid (8ml), 1x Mixing dish, 2x Brushes, 1x directions for use (pictorial).
SAVE 15%
LAB ESSENTIALS
www.henryschein.com.au 19
YOUR DIRECT LINE TO OUR LABORATORY CUSTOMER CARE TEAM!
SYDNEY NSW
Head Office Unit 1, 44 O’Dea Avenue, Waterloo, NSW 2017
ADELAIDE SA
311 Unley Road,Malvern, SA 5061
BRISBANE QLD
Cnr Merivale & Tribune Streets, South Brisbane, QLD 4101
MELBOURNE VIC
423 Smith Street,Fitzroy, Vic 3065
PERTH WA
154 Edward Street,Perth, WA 6000
CONTACT YOUR LOCAL OFFICE
TEL: 1300 65 88 11l a b @ h e n r y s c h e i n . c o m . a u
20
MASTERING THE SCHEU MINISTAR S
PRECISION LASER WELDING WORKSHOP
PRESSURE MOULDING MADE EASY
Speaker: John Wainwright
Dates:
5th February, Sydney
12th February, Perth
19th February, Adelaide
25th February, Melbourne
26th February, Geelong
4th March, Newcastle
9th March, Sydney
Attendance is strictly limited to customers who have recently purchased a Scheu Ministar S. Spaces are limited and subject to availability. Please contact your local Territory Manager to express your interest.
Speaker: John Wainwright
Dates:
11th February, Perth
12th February, Perth
18th February, Adelaide
19th February, Adelaide
23rd February, Albury
24th February, Melbourne
25th February, Melbourne
26th February, Geelong
12th March, Sydney
Attendance is by invitation only. Spaces are limited and subject to availability. Please contact your local Territory Manager to express your interest.
Speaker: Claus Reith, Dental Technician (Germany)
Dates:
16th March, Perth
17th March, Adelaide
18th March, Melbourne
19th March, Sydney
20th March, Brisbane
To Register and for more information please email [email protected] or visit: http://henryschein.com.au/eventsandeducation
JANUARY 2015
M T W T F S S
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31
MARCH 2015
M T W T F S S
1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30 31
FEBRUARY 2015
M T W T F S S
1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28
LABORATORY EDUCATION & EVENTS
DENTA PUK The innovation - naturally from Lampert
Established& proven technology
- Precise and user friendly- Flexible and versatile- Compact and space saving- Made to highest standards
The ideal tool for your dental lab.
Our precision welding equipment has undergone constant development and has been consistently tailored to meet the special welding requirements of the dental industry. The highest degree of functionality has been combined with outstanding design. The result is a pre-cision welder that is not only suitable for everyday use, but which also optically
-ments of today’s modern dental labora-tory.
Biocompatibility constitutes an impor-tant aspect in modern jointing tech-niques; here our DENTA PUK can make a major contribution.
Pin welding modePulse-welding modeSoft welding modeMicro welding modeSpeed control
-
-
-
-
-
So the exact positioning of small, stable spot-welds, or of welds in hard-to-get-to or deep lying positions, poses no problem. The area of the work piece that is affected by heat, is very small when working with the DENTA PUK. So small in fact, that problem free welds adjacent to veneers and resin saddles can be handled with ease.
The DENTA PUK allows you to adjust power and impulse time to suit the users’ individual needs. This enables an exact control of the size and depth of the weld. The DENTA PUK offers users
ibility and freedom of movement, as it needs no welding box. The hand-piece can be used “freehand”, in its stand, or in the microscope mounting arm, as it suits the user’s needs or requirements.
Our precision welding equipment puts a whole host of possible applications at
model casts, the repair of crowns and bridges, joints and constructions for the bases of model casts, as well as orthodontic applications are just a few of the examples. DENTA PUK allows the problem free adding of metal. Whether it’s fractures, pores and joints, with the aid of welding wire, material can simply be added and built up. Particularly suited to the welding process are cobalt-chrome alloys, all precious metal alloys, as well as stainless steel and titanium.
Presenter:Claus Reith, Dental Technician, Germany. Claus has worked forLampert, Germany since 2009as a techical trainer and has 16years experience in the following areas of expertise:
• Metal-ceramic restorations• Working with CAD/CAM systems• Milling work in combination with removable restorations• Implant prosthetics
Workshops:10th September - Dunedin11th, 12th & 13th September - Auckland
Times: 8.30am- 12.30pm or 1pm - 5pmCost: $30.00RSVP: [email protected] or phone (09) 927 4050
View Lab Essentials on the Henry Schein Halas App
w w w . h e n r y s c h e i n . c o m . a u O r d e r s 1 3 0 0 6 5 8 8 1 1