lab ware

C

O

N TA INS

P

2012 2011

G RI CIN

A CE G L

S A

A N N I V E R S A R Y

1936

75TH

INCOR S

PO OTE D TE D RA RA

2011

VI

NE

Laboratory Glassware & Equipment Catalog

J

USA

,N LAND

s our 75th Anniversary arrives, the Ace Glass Family, past and present, wish to thank our customers for sharing their laboratories with 75 years worth of Ace innovations and shared trust in our products. From Ace-Threds to Photochemistry Reactors to Lab Scale Pilot Plants, our customers enthusiastically traded ideas with our engineers and technicians, developing an astounding array of apparatus used to enhance many of the worlds most important industries. Around the world and every day from 1936 til now, new discoveries in the many disciplines of chemistry were aided by Ace Glass craftsmen and the researchers that trust in the truism that, Quality Chemistry begins with Quality Glassware. In the new century, many have predicted the extinction of glassware and wet chemistry from the laboratory in favor of plastics and instrumentation. To those who hold to this prediction, we say that when you come to realize your inevitable need for glassware, Ace Glass will be there to support all your efforts within current, escalating technologies such as

A

A CE G L

S INCORP AS


1936

75TH

2011

O OTE D TE D RA RA

IN

E L A N D,

USA

bio-fuel development and nanotechnology and those future disciplines of which we havent yet dreamed. Heres to the next 75 years of challenges and discoveries shared by the Ace Glass Family and you, our customers. Thank you!

A few Ace Glass firsts:First American-made Spherical Joints First American-made sintered fritted ware First internally threaded glass joints Ace Threds First lab scale Pilot Plants and Reactors Photochemistry Glass and Equipment Pressure Vessels and Reactors

First Ace Trubore Stirrers

First Micro/Mini Labware and Kits

First Heating Blocks

Sonochemistry Glass and Equipment

JN

V V

Table of ContentsAce-Threds ................................................................... 158 Adapters ......................................................................... 19 Beakers ........................................................................... 53 Bearings ........................................................................ 495 Bottles ............................................................................. 57 Cell Culture ..................................................................... 73 Chromatography............................................................. 80 Clamps .......................................................................... 134 Columns .......................................................................... 96 Condensers .................................................................. 144 Connectors ................................................................... 158 Cylinders ....................................................................... 169 Distillation Apparatus ................................................... 173 Drying Apparatus.......................................................... 388 DynaBlocs..................................................................... 325 Air Sampling Apparatus ............................................... 389 Evaporation, Rotary Evaporators ................................ 221 Extraction Apparatus ................................................... 234 Filter Reactors .............................................................. 449 Filtration ........................................................................ 281 Flasks ............................................................................ 243 Fritted Ware .................................................................. 283 Funnels ......................................................................... 296 Gas Apparatus .............................................................. 310 Heating Mantles ........................................................... 315 Homogenizers............................................................... 555 Hydrogenation Apparatus ............................................ 328 Instatherm ................................................................... 331 Joints and Ace-Threds ................................................. 339 Mini-Lab/Micro/Mini-Lab ............................................. 352 Mixing ........................................................................... 491 Moisture Test Apparatus .............................................. 377 No-Air Glassware.......................................................... 381 NMR Tubes ................................................................... 611 O-Rings ......................................................................... 391 Photochemical Equipment ........................................... 401 Pressure Tubes/Bottles, Flasks ................................... 426 Process Pipe................................................................. 159 Pumps ........................................................................... 162 Recirculators/Chillers ................................................... 478 Rotary Evaporators ...................................................... 480 Safety Tips ...................................................................... 18 Septa ............................................................................. 485 Stirring........................................................................... 491 Stirrer/Hot Plates .......................................................... 546 Stirrer Motors................................................................ 530 Stopcocks ..................................................................... 558 Sublimation Apparatus................................................. 162 Supports ....................................................................... 158 Technical Information ....................................................... 7 Temperature Controllers/Sensors ................................ 595 Thermometers .............................................................. 159 Trubore Stirrers/Bearings ............................................. 491 Ultrasonics .................................................................... 617 Vacuum Apparatus ....................................................... 625 Vacuum Pumps............................................................. 649 Valves ............................................................................ 652 Vials ............................................................................... 655 Vortexers ....................................................................... 557

A CE G L

S INCORP AS


1936

75TH

2011

O O

TE D TE D RA RA

IN

E L A N D,

Offices and Shipping LocationACE GLASS INCORPORATED P.O. Box 688 1430 North West Boulevard Vineland, NJ 08362-0688 Phone: 856-692-3333 Fax: 856-692-8919

Toll-Free:

1-800-223-4524Fax: 1-800-543-6752

www.aceglass.comE-mail: [email protected](International)

[email protected] in U.S.A.

Copyright 2011 by ACE GLASS INCORPORATED, Vineland, NJ 08360 USA

JN

USA

V V

4

General Information

SpecificationsThe products in this catalog represent what we believe to be the most advanced design and construction. However, design improvements are constantly being made, and we reserve the right to modify specifications where we feel that a change is warranted. Apparatus fabricated in accordance with ASTM, API, AOAC, ANSI, ISO, and other technical organization specifications such as USP, NIST, and NIOSH, are subject to modification by these organizations. All precision-grade ware is warranted to be within the tolerance prescribed in ASTM Specifications. All laboratory-grade ware is twice precision-grade tolerances.

Special ApparatusOrders or inquiries for special apparatus should be accompanied by prints or drawings, if possible. To prevent delay, and to enable us to more intelligently quote on your specials, all necessary dimensions and tolerances should be noted. For technical information, design assistance and help please visit www.aceglass.com. The following information should also be furnished where applicable: joint sizes, Ace-Thred sizes, capacity, whether to contain or to deliver, porosity of filter, and any abnormal operating conditions, such as extremely high pressure or temperature, to which the apparatus may be subjected. We reserve the right to overrun or under run by 10% on orders for special items and to ship and invoice for amounts within this variation. NOTE: Special items are not returnable. Our research and drafting departments are always available to assist you in designing special apparatus. Your special will be assigned a permanent drawing number for future reference, duplication or change. You will be sent a drawing of your special for your approval/ sign-off before manufacturing begins.

In case of Shortage: 1. Notify ACE immediately. 2. A replacement will be issued upon confirming inventory discrepancy. In case of Loss: 1. First, please verify with all your receiving departments that delivery was not made. 2. Notify ACE immediately. 3. ACE will contact the carrier for tracking information as applicable. 4. A replacement will be issued upon verification that the shipment was not delivered and upon confirmation that the carrier cannot locate shipment. Please Note:

All breakages and shortages must be reported within two weeks of receipt.

Returns and RepairsIncoming material (returns or repairs) must be pre-approved by our Product Return Specialist. Please follow these steps to ensure our Receiving Department does not refuse your shipment.

1

Contact ACE for an RA# (Return Authorization Number). 1-800-223-4524 (Vineland, NJ, USA) E-mail: [email protected]

Types of GlassAll ACE-manufactured glassware items listed in this catalog are, unless otherwise noted, fabricated from 33 expansion borosilicate glass, such as Pyrex Brand Glass, a product of Corning Incorporated; KG-33 Glass, a product of Kimble Glass Company; Duran Glass, a product of Schott Glaswerke; Simax, a product of Kavalier Glaswork.

Breakage or LossIn case of Breakage: 1. Notify ACE immediately. 2. Please retain all inner and outer cartons and packing material. 3. ACE will advise you whether the carrier will report to your location for inspection or if item(s) are to be returned for inspection.

2. Once an RA# is given, properly pack the item(s) in an inner and outer box/carton and write the RA# on the outside of the box. All used items are to be thoroughly cleaned and defined in the assignment of an RA#. 3. A 20% restocking fee will be assessed for authorized returns unless arranged otherwise. ACE cannot accept responsibility for damage or destruction of glassware that occurs in your shipment to us. We strongly advise you to purchase additional insurance with your carrier. 4. For Returns that are the result of your receiving the item(s) broken, ACE cannot accept responsibility for further damage or destruction of glassware that occurs in the return shipment due to improper packing. 5. Repairs will be evaluated by our technicians. You will be advised if any pieces are beyond repair or cannot be salvaged economically. ACE cannot accept responsibility for further damage or destruction of any glassware that is damaged during return shipment. Please Note:

ACE cannot accept responsibility for material returned without proper authorization.

Specifications are subject to change without prior notice. Although they are represented to be accurate, it is best to verify product specifications with ACE prior to purchase in the event they have been changed since publication of this catalog.

Ordering Information

5

Order by CodeEach item in this catalog has a two- or three-digit code in addition to the four- or five-digit number. This code appears above or immediately preceding the price of the item, and no other ordering information is needed since each individual size, capacity, etc. has its own code. Example: 5000 10/30 top 14/35 bottom would be ordered as 5000-05. The majority of items listed in this catalog are normally available from stock at our plant in Vineland, NJ. In the event your entire order cannot be filled immediately, a partial shipment will be sent, with the back-ordered items following shortly. If you would like the entire order to be sent in one shipment, please indicate this on your purchase order. Unless otherwise specified on the purchase order, we will ship material by what we consider the best way.

ACE Glassware DiscountsAll ACE-manufactured glassware, identified with a spade (), listed in this catalog is subject to the following dollar value discounts. Items marked by a star () or that have no designation whatsoever are not subject to this discount. 10% on purchases of $500.00 and over 12% on purchases of $1,000.00 and over 15% on purchases of $1,500.00 and over Terms: Net 30 days (Domestic only)

Contact ACE for current price list/pricing CD or visit our website, www.aceglass.com.Managed by Technical Communities: Testmart/GSA Advantage/GSAMart

Ace Glass products are also available from our many lab distribution partners, particularly VWR International, LLC and Sigma-Aldrich.PHONE 856-692-3333

Ways to Order

800-223-4524FAX 856-692-8919

800-543-6752CREDIT CARD VISA

MasterCard American ExpressMAIL P.O. Box 688

Vineland, NJ 08362WEB SITE www.aceglass.com E-MAIL [email protected] INTERNATIONAL [email protected]

Shipments are F.O.B. our factory in Vineland, NJ, USA. ACE GLASS is a certified veteran-owned small business!

ACE Laboratory Glassware is intended for laboratory use only. Proper laboratory procedures and safety practices should always be followed.

INTERNATIONAL SALES Ways to Order Methods of PaymentMail: Ace Glass Incorporated International Sales Dept. 1430 N. West Blvd P.O. Box 688 Vineland, NJ 08360-0688 USA Phone: 856-692-3333 Fax: 856-692-8919 E-mail: [email protected] Wire Transfer Irrevocable, payable on-sight, and confirmed letter of credit Payment in advance by check or money order, in US Funds only Credit Card: Amex, Visa, MasterCard, etc.

6

Vendor Information

TrademarksAce-Thred, Ace-Safe, Adjusta-Chrom, DynaBloc, Dura-Vac, FETFE, Flex-Grip, Instatherm, Mini-Lab, Micro/Mini-Lab, StirLube, ZDS, and Trubore are Registered Trademarks of ACE GLASS INCORPORATED. Buchi is a Registered Trademark of Buchi, Ltd. Chemraz is a Registered Trademark of Greene Tweed & Co. IKAMG, IKATRON, VIBRAX, ULTRA-TURRAX and IKA are Registered Trademarks of IKA Works, Inc. Kel-F is a Registered Trademark of 3M Company. Lab-Guard and Therm-O-Watch are Registered Trademarks of Glas-Col. LabJaws, bioforce, Talboys, and Flexaframe are Registered Trademarks of Troemner Co. Nylon, Delrin, Kalrez, Viton, Surlyn, Tefzel, Teflon, and Krytox are Registered Trademarks of E. I. Dupont & Co. Poly-Jaque and Polystormor are Registered Trademarks of Bel-Art Products. Poly-Seal is a Registered Trademark of Poly-Seal Corp. Powerstat is a Registered Trademark of Superior Electric Co. Precision Seal and Suba Seal are Trademarks of Sigma-Aldrich Biotechnology, LP. Rodaviss is a Registered Trademark of S.A.V. France. Swagelok is a Registered Trademark of Crawford Fittings. V-Vial is a Registered Trademark of Wheaton Science Products Division.

Manufacturers whose quality products are listed in this catalog: Assem-Pak Arrow Engineering Bel Art Products BriskHeat Heidolph Cadence Science Caframo Cannon Instrument Co. Cowie Technology Duran Group E. I. Dupont & Co. Electrothermal Gallagher Controls Glas-Col Apparatus Greene, Tweed & Co., Inc. W. A. Hammond Drierite Co. Hanovia IKA Works I.W. Tremont J-Kem Julabo Lamson & Goodnow Mfg. Co. Lauda Master Appliance Optimize Technologies, Inc. Parr Instrument Co. PolyScience Pope Scientific Quartz Scientific, Inc. Schott Glaswerke Scientific Development Co. Sigma-Aldrich SGE Sonics & Materials, Inc. The Superior Electric Co. Troemner VWR International Welch/ILMVAC Worldwide Glass Resources

Technical Information

7

Reference Guide to Ace-Thred SizesAccepts Use Bushing Size Tube O.D., mm Number Mini #7 6-7 5029-10 Midi Maxi Giant Jumbo #11 #15 #18 #25 #36 #50 #80 9-10.5 12.5-14 16-17 24-25 34-35 47-48 80 7506-02 7506-06 7506-08 7506-10 7506-12 7506-14 7506-20 Use With O-Ring No. 7855-704 7855-708 7855-716 7855-720 7855-734 7855-740 7855-744 7855-782 Optional Ferrule 11710-07 11710-11 11710-15 11710-18 11710-25 11710-50 Suggested Uses A, B, I D, E, F, G C, H H, L K K, L K, L

Fraction ConversionLength, Fractional Inches 1/16 1/8 3/16 1/4 5/16 38 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 Millimeters 1.6 3.2 4.8 6.4 7.9 9.5 11.1 12.7 14.3 15.9 17.5 19.1 20.6 22.1 23.8 25.4

AThermometers, BBleed Tubes, CElectrodes, DSensing Probes, EThermowells, FGas Dispersion Tubes, GVacuum Take-Offs, HInlet and Outlet Tubes, IMiniature Electrodes, KManifolds, LImmersion Wells

Dimensions in Millimeters3.0 6.5 10.5 3.5 7.1 10.4

Hose Connection Size Guide3.0 6.0 10.0 4.0 8.9 5.0 8.4 7.7 12.5 7.3 13.8

12.5

11.5

12.9 16.2

Use with 7.9mm (5/16") I.D. Tubing

Use with 7.9mm (5/16") or 9.5mm (3/8") I.D. Tubing






Specifications for Joints, Threads, and StopcocksStandard TaperSymbol used to designate interchangeable joints, stoppers and stopcocks that comply with the requirements of Commercial Standard CS-21 published by N.I.S.T.

24/40 Inner Joint24 mm

24/40 Outer Joint24 mm 40 mm

35/25 Ball Joint

35/25 Socket Joint35 mm

#25 O-Ring Joint25 mm

40 mm

25 mm 35 mm

25 mm

#25 Ace-Thred

S J

Spherical Joint

#25 Bushing for Ace-Thred25 mm

0-5 mm Hi-Vac Stopcock

12/30 Glass Stopcock Plug Straight Bore30 mm

12 mm

Symbol designates spherical joints that comply with CS-21.

Product Standard

25 mm

Symbol designates stopcock plugs made of PTFE that meet requirements of N.I.S.T. Voluntary Product Standard PS 28-70.

0-5 mm Orifice Maximum Flow

16.2/56 Glass Double Oblique Stopcock Plug2 mm BORE11 mm

16.2 mm 56 mm

1 1:5 Taper Size 11/25 PTFE Stopcock Plug

25 mm

8

Technical Information

Plastic PropertiesTemperature Limit, C Specific Gravity Tensile Strength, psi Brittleness Temperature, C Water Absorption, % Flexibility Transparency

Low Density Polyethylene (LDPE) 80 0.92 2000 100

lab ware

Documents